Commit Graph

1189 Commits

Author SHA1 Message Date
Daniel Gorsulowski 33b1d3f43a at91: Add esd gmbh MEESC board support
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-07-06 21:52:50 +02:00
Magnus Lilja 8449f287f5 MX31: Add basic support for Freescale i.MX31 PDK board.
Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).

This patch assumes that some other program performs the actual
NAND boot.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Acked-by: Fabio Estevam <fabioestevam@yahoo.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:38 +02:00
Peter Tyser 5da6f806b4 86xx: XPedite5170 board support
Initial support for Extreme Engineering Solutions XPedite5170 -
a MPC8640-based 3U VPX single board computer with a PMC/XMC
site.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:25:48 -05:00
Jean-Christophe PLAGNIOL-VILLARD 576afd4fae integrator: merge integratorap and integratorcp
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Peter Pearse <peter.pearse@arm.com>
2009-06-23 00:10:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD 1b3b7c640d at91sam9263ek: add nor flash support
this will allow you to store use it for the env and to boot directly U-Boot from

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Ilko Iliev 3294923297 at91: add support for the PM9261 board of Ronetix GmbH
The PM9261 board is based on the AT91SAM9261-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9261.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Mike Frysinger 3e88337b22 Blackfin: move ALL += u-boot.ldr to blackfin_config.mk
The way the ALL variable is used allows for config.mk's to add more
targets themselves without having to clutter up the top level Makefile.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:27 -04:00
Mike Frysinger 9ff67e5e4c Blackfin: unify u-boot linker scripts
All the Blackfin linker scripts were duplicated across the board dirs with
no difference save from the semi-often used ENV_IS_EMBEDDED option.  So
unify all of them in the lib_blackfin/ dir and for the few boards that
need to embedded the environment directly, add a LDS_BOARD_TEXT define for
them to customize via their board config file.  This is much simpler than
forcing them to duplicate the rest of the linker script.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:14 -04:00
Hoan Hoang 0f52b560f1 Blackfin: ibf-dsp561: new board port
Signed-off-by: Hoan Hoang <hnhoan@i-syst.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:11 -04:00
Mike Frysinger 3088189a15 Blackfin: blackstamp: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:11 -04:00
Mike Frysinger 59ac972970 Blackfin: bf537-srv1: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:10 -04:00
Mike Frysinger d7fdc1410b Blackfin: bf537-minotaur: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:09 -04:00
Mike Frysinger cb4b5e874f Blackfin: bf537-pnav: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:08 -04:00
Mike Frysinger 59e4be945b Blackfin: cm-bf527: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:07 -04:00
Mike Frysinger 8b219cf07c Blackfin: cm-bf548: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:07 -04:00
Mike Frysinger 9417d9a213 Blackfin: tcm-bf537: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:06 -04:00
Mike Frysinger e548321af0 Blackfin: cm-bf561: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:06 -04:00
Mike Frysinger 8a9bab08a6 Blackfin: cm-bf537e: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:05 -04:00
Mike Frysinger e82d8a1f02 Blackfin: cm-bf533: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:04 -04:00
Mike Frysinger 67c2829b64 Blackfin: support embedding the environment into loader files (LDRs)
For the most part, the Blackfin processor boots files in the LDR format
rather than binary/ELF files.  So we want to export the environment as a
raw blob to the LDR utility so it can embed it at the right location.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:03 -04:00
Mike Frysinger 6d1ce38787 make sure toplevel $(SUBDIRS) is always declared
The $(SUBDIRS) variable is only declared when U-Boot has been configured,
but it gets used all the time.  In the non-configured case, it is used to
generate a helpful error message, but it needs to be set properly for that
to occur.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 23:12:30 +02:00
Wolfgang Denk 92afd368bb Merge branch 'next' of ../master 2009-06-14 22:05:42 +02:00
Wolfgang Denk 6b1f78ae6a Prepare v2009.06
Update CHANGELOG, fix minor coding stylke issue. Update Makefile.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-14 21:30:39 +02:00
Srikanth Srinivasan feb7838f97 85xx: Add P2020DS support
The patch adds support for P2020DS reference platform.
DDR3 interface uses hard-coded initialization rather than SPD
for now and was tested at 667Mhz. Some PIXIS register
definitions and associated code sections need to be fixed.
TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all
tested under u-boot.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:16:25 -05:00
Stefan Roese e53b507cee mpc512x: Add esd gmbh mecp5123 board support
MECP5123 is a MPC5121E based module by esd gmbh.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-06-12 20:47:19 +02:00
Wolfgang Denk 52568c3654 MPC512x: add support for ARIA board
ARIA is a MPC5121E based COM Express module by Dave/DENX.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Wolfgang Denk 72601d04fd Rename ads5121 board into mpc5121ads
We rename the board so we use a consistent name in U-Boot and in
Linux.  Also, we use this opportunity to move the board into the
Freecale vendor directory.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>
2009-06-12 20:47:16 +02:00
Mike Frysinger ecb1dc8922 Add support for Linux-like kallsysms
The kernel stores address<->symbol names in it so things can be decoded at
runtime.  Do it in U-Boot, and we get nice symbol decoding when crashing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 20:45:48 +02:00
David Brownell 28b00324be dm355 evm support
Initial U-Boot support for the DaVinci DM355 EVM.  This is a board
from Spectrum Digital.  Board docs include schematic and firmware
for its microcontroller:

  http://c6000.spectrumdigital.com/evmdm355/revd/

Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:

  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html

This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART).  In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:51 +02:00
Tom Rix 376aee78dd ZOOM2 Add initial support for Zoom2
Zoom2 is a new board from Texas Instruments and LogicPD

The logicpd web site is a good source for general information on this board.
Please start looking here if the below links are broken.
http://www.logicpd.com

This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is the product description web page
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp

This patch provides a zoom2 base target by copying zoom1 and by making some
obvious changes.

To configure, run
make omap3_zoom2_config

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-06-12 20:39:50 +02:00
Stefan Roese d873133f2b ppc4xx: Add Sequoia RAM-booting target
This patch adds another build target for the AMCC Sequoia PPC440EPx
eval board. This RAM-booting version is targeted for boards without
NOR FLASH (NAND booting) which need a possibility to initially
program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
configured to setup the SDRAM, this debugger can load this RAM-
booting image to the target address in SDRAM (in this case 0x1000000)
and start it there. Then U-Boot's standard NAND commands can be
used to program the NAND FLASH (e.g. "nand write ...").

Here the commands to load and start this image from the BDI2000:

440EPX>reset halt
440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
440EPX>go 0x1000000

Please note that this image automatically scans for an already
initialized SDRAM TLB (detected by EPN=0). This TLB will not be
cleared. This TLB doesn't need to be TLB #0, this RAM-booting
version will detect it and preserve it. So booting via BDI2000
will work and booting with a complete different TLB init via
U-Boot works as well.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-06-12 20:39:47 +02:00
Wolfgang Denk 580611cb09 Prepare 2009.06-rc3
Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-10 00:19:28 +02:00
Wolfgang Denk a2e0ffcf2d Prepare v2009.06-rc2
Update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-15 23:29:23 +02:00
Wolfgang Denk 6b8edfde22 Prepare v2009.06-rc1
Update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-01 22:02:22 +02:00
Jean-Christophe PLAGNIOL-VILLARD 6b2beb5626 at91: remove lowlevel_init.S
lowlevel_init.S is not used any more so remove it.
As consequence, we also don't have to generate u-boot.lds
but can use a static version as before.

This also fixes the out-of-tree build problem introduced
with commit f0a2c7b4 "at91: add support for the PM9263 board"

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-05-01 21:24:41 +02:00
Ilko Iliev f0a2c7b4b6 at91: add support for the PM9263 board of Ronetix GmbH
The PM9263 board is based on the AT91SAM9263-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9263.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-16 21:30:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD 2731b9a866 drivers/usb: regorganisation
move to linux usb driver organisation

as following

drivers/usb/gadget
drivers/usb/host
drivers/usb/musb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-04-06 20:40:46 +02:00
Guennadi Liakhovetski 69c5bf2990 ARM: fix out-of-tree build of imx31_phycore_eet
Fix out-of-tree build of the imx31_phycore_eet target.

Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2009-04-05 01:34:36 +02:00
Ulf Samuelsson cb82a53266 Add support for the AT91RM9200EK Board.
The AT91RM9200-EK Evaluation Board supports the AT91RM9200
ARM9-based 32-bit RISC microcontroller and enables real-time code development
and evaluation.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507

with
	- NOR (cfi driver)
	- DataFlash
	- USB OHCI
	- Net
	- I2C (hard)

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:20 +02:00
Jean-Christophe PLAGNIOL-VILLARD 843a2654bc at91sam9: add watchdog support
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-04-04 20:42:19 +02:00
Peter Tyser fb8b33c1e6 tools/Makefile: Remove symlinks for remaining source files
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04 01:14:28 +02:00
Peter Tyser c017017539 tools/Makefile: Remove symlinks for fdt targets
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04 01:14:19 +02:00
Peter Tyser 45d6bdff68 tools/Makefile: Add libfdt/ to the include search path
This change makes the process of symlinking libfdt_internal.h
unnecessary

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04 01:14:14 +02:00
Peter Tyser fba0e3a081 tools: Remove unecessary symlinking of zlib.h
crc32.c uses the zlib.h header in include/u-boot/zlib.h.  The symlink
was previously necessary to give U-Boot's version of zlib.h precedence
over the host computer's version of zlib.h.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04 01:14:09 +02:00
Peter Tyser 2b48f7d5f6 Makefile: Add removal of *.exe files to clean target
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04 01:06:06 +02:00
Peter Tyser d0d6144e0e Makefile: Make autoconf.mk a dependency of the depend target
The original code did not generate autoconf.mk until after some targets
dependencies had already been calculated, for example the directories in
the SUBDIRS variable

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-04-04 01:05:42 +02:00
Mike Frysinger 84a9dda324 Blackfin: bf518f-ezbrd: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:46 -04:00
Mike Frysinger 0c31ddf7b7 Blackfin: bf526-ezbrd: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:42 -04:00
Mike Frysinger 5c45f7cac2 Blackfin: bf538f-ezkit: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:38 -04:00
Mike Frysinger d9a5d113b9 Blackfin: bf527-ezkit: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:35 -04:00
Mike Frysinger 76d21803dd Blackfin: bf548-ezkit: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:41:29 -04:00
Wolfgang Denk dfc91c3395 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-04-02 00:24:33 +02:00
Haiying Wang 765547dc5e MPC85xx: Add MPC8569MDS board support
This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-30 13:33:51 -05:00
Detlev Zundel 572e6179ad drivers/twserial: Add protocol driver for "three wire serial" interface.
This pretty unintelligent interface is used on some RTC chips.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2009-03-30 09:38:36 +02:00
Jean-Christophe PLAGNIOL-VILLARD 281dfb0c0c s3c4510b: move specific code to soc directory
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-29 23:01:36 +02:00
Nicolas Ferre df486b1fa3 at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed.

The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board.
It is essentially the same, with a few minor differences.

Here is the chip page on Atmel website:
http://www.atmel.com/dyn/products/product_card.asp?part_id=4337

Signed-off-by: Justin Waters <justin.waters@timesys.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-22 14:48:16 +01:00
Jean-Christophe PLAGNIOL-VILLARD 53158aea99 at91sam9xeek: fix soc name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-03-22 14:00:55 +01:00
Wolfgang Denk ee1702d75a Merge branch 'next' of ../next 2009-03-21 22:15:49 +01:00
Wolfgang Denk e60beb13cf Prepare 2009.03
Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-03-21 22:04:41 +01:00
Stefan Roese 9eefe2a2b3 UBIFS: Implement read-only UBIFS support in U-Boot
The U-Boot UBIFS implementation is largely a direct copy from the current
Linux version (2.6.29-rc6). As already done in the UBI version we have an
"abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
...). This makes it possible to use the original Linux code with very
little changes. And by this we can better update to later Linux versions.

I removed some of the Linux features that are not used in the U-Boot
version (e.g. garbage-collection, write support).

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Artem Bityutskiy <dedekind@infradead.org>
CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>
2009-03-20 22:39:15 +01:00
Stefan Roese b1b4e89a0f Add LZO decompressor support
This patch adds LZO decompression support to U-Boot. It is needed for
the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
decompressor. Since we only support read-only in UBIFS, only the
decompressor is needed.

All this is copied with minor changes from the current Linux kernel
version (2.6.28-rc8).

This patch only implements this LZO decompressor support for PPC.
Other platforms using UBIFS will have to add the required
"include/asm/unaligned.h" as well. It should be fairly easy to copy this
from the Linux source tree as I have done it for PPC in this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-03-20 22:39:15 +01:00
Grzegorz Bernacki 5c4fa9b474 Add support for the digsy MTC board.
This is the InterControl custom device based on the MPC5200B chip.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-03-20 22:39:14 +01:00
Heiko Schocher 1b6275dfb1 8xx: add support for new keymile kmsupx4 board.
This patch adds support for the kmsupx4 board from Keymile,
based on a Freescale MPC852T CPU

- serial console on SMC1
- 32 MB SDRAM
- 32 MB NOR Flash
- Ethernet over SCC3
- I2C Bitbang

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-03-18 20:50:05 +01:00
Heiko Schocher d044954fe2 8xx, mgsuvd: rename board to a more generic name
renaming the "mgsuvd" board port into "km8xx", because
there come more similar boards from keymile.
Compiling the mgsuvd board with "make mgsuvd_config"
remains.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-03-18 20:50:04 +01:00
Wolfgang Denk b3dd629e78 Prepare 2009.03-rc2
Update CHANEGLOG, fix minor coding style issue.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-03-15 22:40:09 +01:00
Yoshihiro Shimoda ada9318252 sh: Add support 32-Bit Extended Address Mode to sh7785lcr
We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
for this mode. This command changes PMB for using 512MB system memory.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-03-12 23:58:30 +09:00
Guennadi Liakhovetski a2bb7105a7 ARM: add an "eet" variant of the imx31_phycore board
The "eet" variant of the imx31_phycore board has an OLED display, using a
s6e63d6 display controller on the first SPI interface, using GPIO57 as a
chip-select for it. With this configuration you can display 256 colour BMP
images in 16-bit RGB (RGB565) LCD mode.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-24 10:44:02 +01:00
Wolfgang Denk 32688e572f Update CHANGELOG; Prepare 2009.03-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-02-23 00:22:21 +01:00
Wolfgang Denk 1dcb50afbb Makefile: fix cleanup
Commit e4943ec5 moved the ARM boards to a vendor directory but forgot
to adapt the cleanup rules in the Makefile

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-02-22 01:17:47 +01:00
Peter Griffin 4d41650eec sh: Fix rsk7203 in tree build
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
2009-02-21 23:07:26 +01:00
Wolfgang Denk 9eb468da3f Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-02-19 00:46:32 +01:00
Wolfgang Grandegger a865bcdac8 MPC85xx: TQM8548: add support for the TQM8548_AG module
The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
with "$ make TQM8548_AG_config".

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2009-02-16 18:05:59 -06:00
Wolfgang Grandegger ad7ee5d43b MPC85xx: TQM8548: add support for the TQM8548_BE module
The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
interface. With NAND support, the image is significantly larger and
TEXT_BASE is adjusted accordingly. U-Boot can be built for this
module with "$ make TQM8548_BE_config".

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2009-02-16 18:05:59 -06:00
Ilya Yanok 0d19f6c8cb qong: support for Dave/DENX QongEVB-LITE board
This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-02-10 00:22:31 +01:00
Wolfgang Denk 6c6e042ab3 Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-02-01 21:38:07 +01:00
Jean-Christophe PLAGNIOL-VILLARD 47fd3bffed SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-29 22:56:54 +01:00
Jean-Christophe PLAGNIOL-VILLARD cfca33837e move Samsung's board to board/samsung
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-29 15:29:43 +01:00
Jean-Christophe PLAGNIOL-VILLARD e4943ec574 move ARM Ltd. to vendor dir
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-29 12:07:21 +01:00
Dirk Behme 7379f45a7b OMAP3: Add Zoom1 board support
Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 21:40:16 +01:00
Dirk Behme 2be2c6cc67 OMAP3: Add Pandora support
Add Pandora support.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 21:39:58 +01:00
Dirk Behme ad9bc8e52d OMAP3: Add EVM board
Add EVM board support.

Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 21:39:58 +01:00
Dirk Behme 9d0fc8110e OMAP3: Add Overo board
Add Overo board support.

Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
2009-01-28 21:39:57 +01:00
Dirk Behme f904cdbb68 OMAP3: Add common power code, README, and BeagleBoard
Add BeagleBoard support, common power code and README.

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2009-01-28 21:39:15 +01:00
Mike Frysinger 68e5632494 Blackfin: dont generate ldrs with --force
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-28 13:26:11 -05:00
Wolfgang Denk 49ad480171 Merge branch 'master' of git://git.denx.de/u-boot-mips 2009-01-27 20:55:57 +01:00
Stefan Roese 2a61eff6a8 MIPS: Add VCT board series support (Part 3/3)
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-27 23:08:26 +09:00
Dirk Eibach 89b8619aae ppc4xx: Add GDsys PowerPC 440 ETX board support.
Board support for the Guntermann & Drunck PowerPC 440 ETX module.
Based on the AMCC Yosemite board support by Stefan Roese.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-01-26 10:13:30 +01:00
Alessandro Rubini d5254f149d Initial support for Nomadik 8815 development board
The NMDK8815 board is distributed by ST Microelectornics.
Other (proprietary) code must be run to unlock the CPU before
U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.

This is the initial port, with basic infrastructure and
a working serial port.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-24 18:10:37 +01:00
Wolfgang Denk 8f86a3636e Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2009-01-24 02:17:02 +01:00
Wolfgang Denk 1ea0823786 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-01-24 02:08:31 +01:00
Graeme Russ 407976185e Moved sc520 specific code into new cpu/i386/sc520 folder
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-24 01:10:20 +01:00
Graeme Russ 85ffbbd519 Renamed cpu/i386/reset.S to resetvec.S
Brings i386 in line with other CPUs with a reset vector and frees up reset.c
for CPU reset functions

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-01-24 01:06:25 +01:00
Wolfgang Denk a3f4c123f5 Makefile: keep lists sorted.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-24 01:01:49 +01:00
Graeme Russ c620c01e96 Added initial eNET board support
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-01-24 01:01:16 +01:00
Kim Phillips 833d94bcdc Merge branch 'next' 2009-01-23 17:48:24 -06:00
Heiko Schocher de0443614a powerpc: 83xx: add support for the kmeter1 board
This patch adds support for the kmeter1 board from Keymile,
based on a Freescale MPC8360 CPU.

- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-01-24 00:36:19 +01:00
Kumar Gala 18af1c5f0f 85xx: Add a 36-bit physical configuration for MPC8572DS
We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
to allow for larger memory sizes.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-23 17:09:18 -06:00
Ron Madrid 5bb907a492 mpc83xx: New board support for SIMPC8313
This patch will create a new board, SIMPC8313, from Sheldon Instruments.  This
board boots from NAND devices and is configureable for either large or small
page devices.  The board supports non-soldered DDR2, one ethernet port, a
Marvell 88E1118 PHY, and PCI host support.  The board also has a FPGA connected
to the eLBC providing glue logic to a TMS320C67xx DSP.

Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-01-23 11:31:18 -06:00
Michal Simek 52a822ed9c microblaze: Rename ml401 to microblaze-generic
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-01-23 10:39:56 +01:00
Kim Phillips be4880ebe4 Merge branch 'master' into next 2009-01-21 18:38:51 -06:00
Wolfgang Denk 72d15e705b Prepare v2009.01
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-21 23:08:12 +01:00
Wolfgang Denk 635e5f8fc8 Prepare 2009.01-rc3
Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-18 21:37:48 +01:00
Kieran Bingham a5b04d00bf sh: Fix up rsk7203 target for out of tree build
Fix up rsk7203 target to build successfully using out-of-tree build.

Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-01-16 10:22:27 +09:00
Nicolas Ferre 4e170b1662 at91: add at91sam9xeek board support
At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
it as another entry for at91sam9260 in the Makefile.

Check documentation at :
http://www.atmel.com/dyn/products/product_card.asp?part_id=4263

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-06 21:37:19 +01:00
Jean-Christophe PLAGNIOL-VILLARD 9ffd53db87 fix bmp_logo.h make dependencies to allow parallel build
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-06 21:37:04 +01:00
Jean-Christophe PLAGNIOL-VILLARD e12d9a8fb4 at91: Fix Atmel's at91sam9 boards out of tree build
introduced in commit 89a7a87f08

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-01-06 21:11:52 +01:00
Peter Tyser 78bbc5ce15 XPedite5200 board support
Initial support for Extreme Engineering Solutions XPedite5200 -
a MPC8548-based PMC single board computer.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-19 18:18:51 -06:00
Peter Tyser ccf0fdd02b XPedite5370 board support
Initial support for Extreme Engineering Solutions XPedite5370 -
a MPC8572-based 3U VPX single board computer with a PMC/XMC
site.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-19 18:11:49 -06:00
Peter Tyser e92739d34e Add support for PCA953x I2C gpio devices
Initial support for NXP's 4 and 8 bit I2C gpio expanders
(eg pca9537, pca9557, etc). The CONFIG_PCA953X define
enables support for the devices while the CONFIG_CMD_PCA953X
define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
define enables an 'info' sub-command which provides summary
information for the given pca953x device.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-19 18:11:49 -06:00
Wolfgang Denk aced78d852 Prepare 2009.01-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-12-16 23:48:27 +01:00
Wolfgang Denk 4a0f7538c5 Makefile: fix dependency problem with parallel builds
Parallel builds (using "make -jN") would occasionally fail with error
messages like
	include/autoconf.mk:212: *** missing separator.  Stop.
Line numbers and affected boards were changing. Obviously some
Makefiles included autoconf.mk while it was still being written to.
As a fix, we now write to a temporary file first and then rename it,
so that it is really ready to use as soon as it appears.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-12-16 14:41:02 +01:00
Wolfgang Denk 89d56f5503 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2008-12-13 00:36:25 +01:00
Wolfgang Denk f6704e49d6 Merge branch 'master' of git://git.denx.de/u-boot-sh 2008-12-13 00:26:19 +01:00
Jean-Christophe PLAGNIOL-VILLARD 9a1d3557dc sh: fix rsk7203 and MigoR out of tree build
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-12-10 23:11:34 +09:00
Matthias Fuchs 1951f847f0 ppc4xx: Update TEXT_BASE for CPCI405 boards
This patch fixes building U-Boot for CPCI405 boards.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-10 15:11:15 +01:00
Michal Simek 8fab49ea91 microblaze: Remove XUPV2P board
---

Microblaze platforms use generic settings and to have
many platforms is confusing that's why I decided to remove this
platform from U-BOOT. ml401 tree is sufficient for covering
all Microblaze platforms.

This change will go through microblaze custodian tree.
2008-12-10 09:25:33 +01:00
Wolfgang Denk 13d36ec849 Merge branch 'master' of git://git.denx.de/u-boot-at91 2008-12-09 01:06:14 +01:00
Peter Tyser 434c51a5e6 Remove unneeded CONFIG_SHELL references
Make should be using the bash shell by default which makes
CONFIG_SHELL unnecessary

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-08 23:18:23 +01:00
Peter Tyser cf7a7b9979 Use bash for default GNU Make shell application
Some Make script commands rely on bash-specific features like brace
expansion, so default to bash for the SHELL variable with a fallback
to the standard sh shell

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-08 23:11:15 +01:00
Peter Tyser 561858ee7d Update U-Boot's build timestamp on every compile
Use the GNU 'date' command to auto-generate a new U-Boot
timestamp on every compile.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-12-06 23:36:43 +01:00
Nicolas Ferre 89a7a87f08 at91: Choose environment variables location within make config target
This patch adds the possiblity to choose the media where the environment will
be located. This allow to choose this fundamental configuration without editing
config files.

Documentation file added.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Stelian Pop <stelian@popies.net>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-12-06 13:11:14 +01:00
Jean-Christophe PLAGNIOL-VILLARD c8aa7dfc18 FPGA: move fpga drivers to drivers/fpga
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-12-05 22:41:33 +01:00
Heiko Schocher fed36ac5ae powerpc: 83xx: add support for the kmeter1 board
This patch adds support for the kmeter1 board from Keymile,
based on a Freescale MPC8360 CPU.

- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-11-20 15:29:32 -06:00
Kyungmin Park 58be3a1056 UBI: Add basic UBI support to U-Boot (Part 8/8)
This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
It's based on the Linux UBI version and basically has a "OS"
translation wrapper that defines most Linux specific calls
(spin_lock() etc.) into no-ops. Some source code parts have been
uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
this version with the Linux version and simplifies future UBI
ports/bug-fixes from the Linux version.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-19 20:34:39 +01:00
Becky Bruce 8db0400a27 toplevel Makefile: Add MPC8641HPCN_36BIT target
This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-11-10 10:10:05 -06:00
Wolfgang Denk 23b7b87a37 Merge branch 'master' of git://git.denx.de/u-boot-at91 2008-11-09 00:09:51 +01:00
Jean-Christophe PLAGNIOL-VILLARD 28962f5a2d Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-11-04 23:47:17 +01:00
Sergey Lapin 1079432e04 Custom AFEB9260 board support
This patch provides support for AFEB9260 board, a product of
OpenSource hardware and software. Some commertial projects
are made with this design. A board is basically AT91SAM9260-EK
with some modifications and different peripherals and different
parts used. Main purpose of this project is to gain experience in
hardware design.
More info: http://groups.google.com/group/arm9fpga-evolution-board
(In Russian only, sorry).
Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
2008-11-04 23:47:17 +01:00
TsiChung Liew 536e7dac16 ColdFire: Add MCF5301x CPU and M53017EVB support
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
TsiChung Liew a21d0c2cc9 ColdFire: Add SBF support for M52277EVB
Add serial boot support

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-11-03 09:45:58 -07:00
Nobuhiro Iwamatsu 51b572a801 sh: rsk7203: Moved rsk7203 board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:56 +09:00
Nobuhiro Iwamatsu 58453b00b3 sh: MigoR: Moved MigoR board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:49 +09:00
Nobuhiro Iwamatsu c1da2a2281 sh: r2dplus: Moved r2dplus board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:43 +09:00
Nobuhiro Iwamatsu 78385bf235 sh: sh7763rdp: Moved sh7763rdp board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:38 +09:00
Nobuhiro Iwamatsu c6525d459c sh: sh7785lcr: Moved sh7785lcr board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:31 +09:00
Nobuhiro Iwamatsu acd3e30d09 sh: r7780mp: Moved r7780mp board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:25 +09:00
Nobuhiro Iwamatsu f84e6ea275 sh: ap325rxa: Moved ap325rxa board to board/renesas
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-10-31 23:04:18 +09:00
Georg Schardt 5deb8022c3 ppc4xx: New board avnet fx12 minimodul
This patch adds support for the avnet fx12 minimodul.
It needs the "ppc4xx: Generic architecture for xilinx ppc405"
patch from Ricardo.

Signed-off-by: Georg Schardt <schardt@team-ctech.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-24 17:34:26 +02:00
Ricardo Ribalda Delgado 1f4d53260e ppc4xx: Generic architecture for xilinx ppc405(v3)
As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
ppc440 boards, this patch presents a common architecture for all the
xilinx ppc405 boards.

Any custom xilinx ppc405 board can be added very easily with no code
duplicity.

This patch also adds a simple generic board, that can be used on almost
any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h

This patch is prepared to work with the latest version of EDK (10.1)

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-24 17:26:09 +02:00
Dirk Eibach d7b26d5832 ppc4xx: Add GDSys neo 405EP board support
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:35:02 +02:00
Adam Graham f09f09d389 ppc4xx: Add AMCC Arches board support (dual 460GT)
The Arches Evaluation board is based on the AMCC 460GT SoC chip.
This board is a dual processor board with each processor providing
independent resources for Rapid IO, Gigabit Ethernet, and serial
communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
FLASH, UART, EEPROM and temperature sensor, along with a shared debug
port. The two 460GT's will communicate with each other via shared
memory, Gigabit Ethernet and x1 PCI-Express.

Signed-off-by: Adam Graham <agraham@amcc.com>
Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-10-21 17:34:46 +02:00
Wolfgang Denk f82642e338 Merge 'next' branch
Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-18 21:59:44 +02:00
Ed Swarthout 5e981d683d Add cpu/8xxx to TAGS_SUBDIRS
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
2008-10-18 21:54:05 +02:00
Jean-Christophe PLAGNIOL-VILLARD 6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Heiko Schocher 86e9cdf8c4 mgsuvd, mgcoge: move this 2 boards in one dir.
There are some more extensions, which are for both boards
and some more boards from this manufacturer will follow soon.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-18 21:54:01 +02:00
Wolfgang Denk b59b16ca24 Prepare v2008.10 release: update CHANGELOG & Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-18 21:30:31 +02:00
Wolfgang Denk b4dbacf69a Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-15 15:50:45 +02:00
Wolfgang Denk c0d2f87d6c Prepare v2008.10-rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-14 00:59:35 +02:00
Luigi 'Comio' Mantellini fc9c1727b5 Add support for LZMA uncompression algorithm.
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-13 01:59:07 +02:00
Wolfgang Denk afbc526336 Merge branch 'Makefile-next' of git://git.denx.de/u-boot-arm 2008-09-12 16:13:12 +02:00
Ricardo Ribalda Delgado 2bec498ed1 ppc4xx: Fix compilation of v5fx30teval_flash
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-12 07:10:31 +02:00
Jean-Christophe PLAGNIOL-VILLARD 0cf4fd3cf8 rename environment.c in env_embedded.c to reflect is functionality
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:01 +02:00
Jean-Christophe PLAGNIOL-VILLARD 9314cee691 rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:47:59 +02:00
Wolfgang Denk 8b9e478764 Update CHANGELOG, prepare 2008-10-rc1 release
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-09 23:55:18 +02:00
Ricardo Ribalda Delgado 880f6a5d75 ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
This patch solves the problems compiling ml507, v5fx30teval and
ppc440-generic out of tree.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2008-09-09 16:08:05 +02:00
Ricardo Ribalda Delgado 0817d688f3 Remove gap fill in srec object v2
SREC files do not need gap fill: The load address is specified in the
file. On the other hand, it can't be avoided in a .bin object. It has
no information about memory location.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2008-09-09 12:07:39 +02:00
Matthias Fuchs dd794323a2 ppc4xx: Fix out-of-tree building of CPCI405 variants
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Acked-by: Stefan Roese <sr@denx.de>
2008-09-09 10:21:28 +02:00
Wolfgang Denk ab00e7a23e Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Conflicts:

	Makefile

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-09 02:24:51 +02:00
Wolfgang Denk 2e3c867d0a ml507: fix out of tree build problem
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-08 22:46:42 +02:00
Matthias Fuchs 767f9159c5 ppc4xx: Update CPCI405 variants handling
This patch replaces the BOARD_REVISION variable in include/config.mk
by a using a temporary include file in the platform directory.

The former way does not work anymore and the latter is also used by
some other boards.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-08 10:28:29 +02:00
Ricardo Ribalda Delgado e07f4a8033 ppc44x: Unification of virtex5 pp440 boards
This patch provides an unificated way of handling xilinx v5 ppc440 boards.

It unificates 3 different things:

1) Source code
A new board called ppc440-generic has been created. This board includes
a generic tlb initialization (Maps the whole memory into virtual) and
defines board_pre_init, checkboard, initdram and get_sys_info weakly,
so, they can be replaced by specific functions.

If a new board needs to redefine any of the previous functions
(specific initialization) it can create a new directory with the
specific initializations needed. (see the example ml507 board).

2) Configuration file
Common configurations are located under configs/xilinx-ppc440.h, this
header file interpretes the xparameters file generated by EDK and
configurates u-boot in correspondence. Example: if there is a Temac,
allows CMD_CONFIG_NET
Specific configuration are located under specific configuration file.
(see the example ml507 board)

3) Makefile
Some work has been done in order to not duplicate work in the Main
Makefile. Please see the attached code.

In order to support new boards they can be implemented in the next way:

a) Simple Generic Board  (90% of the time)
Using EDK generates a new xparameters.h file, replace
ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
&& make

b) Simple Boards with special u-boot parameters (9 % of the time)
Create a new file under configs for it (use ml507.h as example) and
change your paramaters. Create a new Makefile paragraph and compile

c) Complex boards (1% of the time)
Create a new folder for the board, like the ml507

Finally, it adds support for the Avnet FX30T Evaluation board, following
the new generic structure:

Cheap board by Avnet for evaluating the Virtex5 FX technology.

This patch adds support for:
 - UartLite
 - 16MB Flash
 - 64MB RAM

Prior using U-boot in this board, read carefully the ERRATA by Avnet
to solve some memory initialization issues.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-05 11:51:22 +02:00
Nick Spence 64ac1eb5af mpc83xx: fix mpc8313 in-tree building with NAND
and add mpc8313 NAND build to MAKEALL

Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-09-03 16:09:52 -05:00
Wolfgang Denk e99e9575bb Merge branch 'Makefile' of git://git.denx.de/u-boot-arm 2008-09-01 00:16:29 +02:00
Wolfgang Denk a13b2d9379 Merge branch 'master' of git://git.denx.de/u-boot-arm 2008-09-01 00:06:05 +02:00
Nobuhiro Iwamatsu 468eae0660 sh: Replaced "@./mkconfig" for @$(MKCONFIG)
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 23:25:57 +09:00
Nobuhiro Iwamatsu 6f0da4972e sh: Renesas Solutions AP325RXA board support
AP325RXA is SH7723's reference board.
This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
In this patch, support SCIF, NOR Flash, and Ethernet.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 23:05:41 +09:00
Nobuhiro Iwamatsu c655fad06b sh: Renesas RSK+ 7203 board support
This adds initial support for the RTE RSK+ SH7203 board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 23:02:04 +09:00
Nobuhiro Iwamatsu 0d53a47dc0 sh: Renesas R0P7785LC0011RL board support
This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
Graphic, Ethernet, USB, SD, RTC, and I2C controller.

This patch supports the following functions:
 - 128MB DDR2-SDRAM (29-bit address mode only)
 - NOR Flash
 - USB host
 - Ethernet

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-08-31 22:45:08 +09:00
Guennadi Liakhovetski 11edcfe260 ARM: Add support for S3C6400 based SMDK6400 board
SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-08-31 00:39:47 +02:00
Hugo Villeneuve 89d51d022a ARM DaVinci: Standardize names of directories/files
ARM DaVinci: Standardize names of directories/files.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-30 23:18:55 +02:00
Jean-Christophe PLAGNIOL-VILLARD 55195773ea miiphybb: move to drivers/net/phy
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-29 12:25:02 +02:00
Wolfgang Denk ae9e1b579e Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx 2008-08-28 00:39:27 +02:00
Heiko Schocher 258c37b147 mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-27 16:03:48 -06:00
Kumar Gala 9490a7f1a9 mpc85xx: Add support for the MPC8536DS reference board
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Dejan Minic <minic@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:54 -05:00
Kumar Gala 129ba616b3 mpc85xx: Add support for the MPC8572DS reference board
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:53 -05:00
Kumar Gala 58e5e9aff1 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
The main purpose of this rewrite it to be able to share the same
initialization code on all FSL PowerPC products that have DDR
controllers.  (83xx, 85xx, 86xx).

The code is broken up into the following steps:
	GET_SPD
	COMPUTE_DIMM_PARMS
	COMPUTE_COMMON_PARMS
	GATHER_OPTS
	ASSIGN_ADDRESSES
	COMPUTE_REGS
	PROGRAM_REGS

This allows us to share more code an easily allow for board specific code
overrides.

Additionally this code base adds support for >4G of DDR and provides a
foundation for supporting interleaving on processors with more than one
controller.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:05:58 +02:00
Heiko Schocher adf22b66d8 Add support for muas3001 board (MPC8270)
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-08-27 01:00:43 +02:00
Andre Schwarz 306620b762 remove MVS1 board
MVS1 board has reached end-of-life and can be removed completely.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2008-08-26 23:58:46 +02:00
Andre Schwarz 1a9eeb78b8 change mvBL-M7 default env and move to vendor subdir
fix mvBL-M7 config and move to matrix_vision subdir

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25 17:11:20 -05:00
Kim Phillips f4e55a4941 fix out of tree building
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-08-25 17:03:57 -05:00
Jean-Christophe PLAGNIOL-VILLARD a958b663d2 Makefile: fix posix support on find
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-21 01:41:15 +02:00
Haavard Skinnemoen d3c23a790f Merge branch 'next' of git://git.denx.de/u-boot-avr32
Conflicts:

	MAINTAINERS
2008-08-20 09:37:09 +02:00
Haavard Skinnemoen 7321d7e7b6 Merge branch 'mimc200' of git://git.denx.de/u-boot-avr32
Conflicts:

	MAKEALL
	Makefile
2008-08-20 09:12:28 +02:00
Mark Jackson 13b50fe3bc avr32: Add MIMC200 board
The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
8MByte FLASH and 128KByte FRAM.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-20 09:10:31 +02:00
Harald Welte 0a823aa2a8 Add 'license' command to U-Boot command line
The 'license' command includes the U-Boot license (GPLv2) into the
actual bootloader binary. The license text can be shown interactively
at the U-Boot commandline.

For products where the commandline can actually be accessed by the
end user, this helps to prevent inadvertent GPL violations, since the
GPLv2 license text can no longer be 'forgotten' to be included into
the product.

The 'license' command can be enabled by CONFIG_CMD_LICENSE.

Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-08-18 23:21:49 +02:00
TsiChung Liew 10db3a17a2 ColdFire: Move m5282evb from board to board/freescale
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew 56df091d39 ColdFire: Move m5272c3 from board to board/freescale
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew 659e9bad62 ColdFire: Move m5271evb from board to board/freescale
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew 05316f8ece ColdFire: Add M54451EVB platform support for MCF5445x
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:56 -06:00
TsiChung Liew 9f75155145 ColdFire: Implement SBF feature for M5445EVB
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:31:55 -06:00
TsiChung Liew 6d33c6acfa ColdFire: Add M5253DEMO platform support for MCF5253
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2008-08-14 12:30:10 -06:00
Wolfgang Denk 2fd0aad443 Merge branch 'Makefile' of git://git.denx.de/u-boot-arm 2008-08-13 23:23:13 +02:00
Stefan Roese 5a7ddf4e1f Merge branch 'master' of /home/stefan/git/u-boot/u-boot 2008-08-13 06:47:12 +02:00
Jean-Christophe PLAGNIOL-VILLARD f5acb9fd9b mx31: move freescale's mx31 boards to vendor board dir
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:09 +02:00
Wolfgang Denk 8641ff266a Merge branch 'master' of git://www.denx.de/git/u-boot-at91 2008-08-12 22:02:27 +02:00
Stefan Roese 9939ffd5fb Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next 2008-08-12 20:39:27 +02:00
Jean-Christophe PLAGNIOL-VILLARD 8ed2f5f950 at91: move arch-at91sam9 to arch-at91
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-12 18:41:42 +02:00
Scott Wood e4c0950854 NAND boot: MPC8313ERDB support
Note that with older board revisions, NAND boot may only work after a
power-on reset, and not after a warm reset.  I don't have a newer board
to test on; if you have a board with a 33MHz crystal, please let me know
if it works after a warm reset.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-12 11:31:31 -05:00
William Juul 43ea36fb8f moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
Signed-off-by: William Juul <william.juul@tandberg.com>
2008-08-12 11:31:21 -05:00
William Juul 90ef117b68 Incorporate yaffs2 into U-boot
To use YAFFS2 define CONFIG_YAFFS2

Signed-off-by: William Juul <william.juul@tandberg.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2008-08-12 11:31:19 -05:00
Wolfgang Denk cd82919e6c Coding style cleanup, update CHANGELOG, prepare release
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-12 16:08:38 +02:00
Haavard Skinnemoen 7772c13ba0 Merge branch 'favr-32' of git://git.denx.de/u-boot-avr32
Conflicts:

	MAINTAINERS
	MAKEALL
	Makefile
2008-08-06 15:12:38 +02:00
Hans-Christian Egtvedt 0eb5717a85 avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
Ethernet, audio out, USB device, SD-card slot, USART and various other
connectors for cennecting stuff to SPI, I2C, GPIO, etc.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-06 15:10:50 +02:00
Stefan Roese f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
Wolfgang Denk 4b50cd12a3 Prepare v1.3.4-rc2: update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-31 17:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD cdb8bd2fd3 apollon: fix build out of tree
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-31 17:46:44 +02:00
Ricardo Ribalda Delgado 9246f5ecfd ppc4xx: ML507: Environment in flash and MTD Support
- Relocate the location of U-Boot in the flash
- Save the environment in one sector of the flash memory
- MTD Support

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-30 13:56:19 +02:00
Ricardo Ribalda Delgado 01a004313c ppc4xx: ML507: U-Boot in flash and System ACE
This patch allows booting from FLASH the ML507 board by Xilinx.
Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-30 11:31:37 +02:00
Julien May 5c374c9ee1 Add support for the hammerhead (AVR32) board
The Hammerhead platform is built around a AVR32 32-bit microcontroller
from Atmel.  It offers versatile peripherals, such as ethernet, usb
device, usb host etc.

The board also incooperates a power supply and is a Power over Ethernet
(PoE) Powered Device (PD).

Additonally, a Cyclone III FPGA from Altera is integrated on the board.
The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
DDR2 SDRAM interfaces, which will cover even the most exceptional need
of memory bandwidth. Together with the onboard video decoder the board
is ready for video processing.

For more information see: http:///www.miromico.com/hammerhead

Signed-off-by: Julien May <mailinglist@miromico.ch>
[haavard.skinnemoen@atmel.com: various small fixes and adaptions]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-30 10:06:11 +02:00
Adrian Filipi 7610db17fd Removed support for the adsvix board.
Support for the adsvix was originally provided by Applied Data
Systems (ADS), inc., now EuroTech, Inc.
The board never shipped aside from some sample boards.

Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
2008-07-30 00:26:03 +02:00
Ricardo Ribalda Delgado 086511fc96 ppc4xx: ML507 Board Support
The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
	among others:
	-Virtex 5 FX FPGA (With a ppc440x5 in it)
	-256MB of SDRAM2
	-32MB of Flash
	-I2C Eeprom
	-System ACE chip
	-Serial ATA connectors
	-RS232 Level Conversors
	-Ethernet Transceiver

This patch gives support to a standard design produced by EDK for this
board: ppc440, uartlite, xilinx_int and flash

- Includes Changes propossed by Stefan Roese and Michal Simek

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Acked-by: Stefan Roese <sr@denx.de>
2008-07-18 12:31:17 +02:00
Stefan Roese 42246dacf6 Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next 2008-07-17 10:41:06 +02:00
Stefan Roese 11188d55bc ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-17 10:40:51 +02:00
Wolfgang Denk 699f051255 Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-15 22:22:44 +02:00
Andre Schwarz 5e0de0e216 mpc5xxx: Add MVBC_P board support
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-15 10:12:58 -06:00
Feng Kan 0ce5c8675b ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
Add AMCC Redwood reference board that uses the latest
PPC 464 CPU processor combined with a rich mix of peripheral
controllers. The board will support PCIe, mutiple Gig ethernet
ports, advanced hardware RAID assistance and IEEE 1588.

Signed-off-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-07-11 13:18:12 +02:00
Martha Marx f31c49db2a Configuration changes for ADS5121 Rev 3
ADS5121 Rev 3 board is now the default config

config targets are now

ads5121_config
    Rev 3 board with
	PCI
	M41T62 on board RTC
	512MB DRAM

ads5121_rev2_config
    Rev 2 board with
	No PCI
	256MB DRAM

Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>
2008-07-10 11:36:42 -06:00
Haavard Skinnemoen 5ce13051a4 Create drivers/mmc subdirectory
In order to consolidate more of the various MMC drivers around the
tree, we must first have a common place to put them.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-07-10 00:02:36 +02:00
Wolfgang Denk 3ab4827cbe SH: fix out of tree building
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-07 00:45:03 +02:00
Hugo Villeneuve c7f879ec2b ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
This patch adds support for the Lyrtech SFF-SDR board,
based on the TI DaVinci architecture (ARM926EJS).

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-06-28 22:54:21 +02:00
Wolfgang Denk b77cddc7b5 Merge branch 'master' of git://www.denx.de/git/u-boot-sh 2008-06-11 22:54:47 +02:00
Wolfgang Denk 5ea67393b8 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx
Conflicts:

	include/asm-ppc/fsl_lbc.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-06-11 21:33:16 +02:00
Wolfgang Grandegger 1287e0c55a TQM8548: Basic support for the TQM8548 modules
This patch adds basic support for the TQM8548 module from TQ-Components
(http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
eTSEC 3 and 4

Furthermore Flash buffer write has been enabled to speed up output to
the Flash by approx. a factor of 10.

Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-11 00:01:43 -05:00
Wolfgang Grandegger 2599135320 TQM85xx: Support for Flat Device Tree
This patch adds support for Linux kernels using the Flat Device Tree.
It also re-defines the default environment settings for booting Linux
with the FDT blob.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-11 00:00:45 -05:00
Wolfgang Grandegger 4677988c7e TQM: move TQM boards to board/tqc
Move all TQM board directories to the vendor specific directory "tqc"
for modules from TQ-Components GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2008-06-10 18:22:26 -05:00
Andre Schwarz a1293e549b add MPC8343 based board mvBlueLYNX-M7 (board+make files)
Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-06-10 13:07:58 -05:00
Nobuhiro Iwamatsu 7faddaecea sh: Renesas Solutions SH7763RDP board support
SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
In this patch, support SCIF, NOR Flash, and Ethernet.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-06-09 14:23:19 +09:00
Haavard Skinnemoen d25ce7d24c SPI Flash subsystem
This adds a new SPI flash subsystem.

Currently, only AT45 DataFlash in non-power-of-two mode is supported,
but some preliminary support for other flash types is in place as
well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-03 20:31:34 +02:00
Wolfgang Denk 912810eeca Merge remote branch 'u-boot-at91/for-1.3.4' 2008-06-03 00:24:36 +02:00
Wolfgang Denk 7a68389a23 Merge remote branch 'u-boot-avr32/master' 2008-06-03 00:19:57 +02:00
Wolfgang Denk 9d2459f353 Merge remote branch 'u-boot-ppc4xx/master' 2008-06-02 23:28:39 +02:00
Haavard Skinnemoen 0a2e48792d avr32: Add support for the ATSTK1006 board
This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
board. It's currently in production and will be available soon.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 15:27:29 +02:00
Jean-Christophe PLAGNIOL-VILLARD 42fd5f87b1 Merging Stelian Pop AT91 patches
Merge branch 'testing-V2'

Conflicts:

	board/atmel/at91cap9adk/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/Makefile
                Fixing copyright
	board/atmel/at91sam9260ek/u-boot.lds
                Delete no more needed ld script

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-24 12:56:53 +02:00
Stefan Roese 97f7d27c8e Merge branch 'quad100hd' 2008-05-21 17:39:24 +02:00
Sergei Poselenov 5d108ac8f4 Initial support for "Socrates" board
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2008-05-20 23:27:46 +02:00
Wolfgang Denk 180a90abda Release v1.3.3
Update CHANGELOG for release.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-19 12:47:11 +02:00
Wolfgang Denk 1510b82d50 Makefile: fix "error: version_autogenerated.h: No such file or directory"
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-13 23:15:52 +02:00
Stelian Pop 2118ebb44d AT91SAM9RLEK support
This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:35:23 +02:00
Stelian Pop 8e429b3eee AT91SAM9263EK support
This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:34:29 +02:00
Stelian Pop d99a8ff66d AT91SAM9261EK support
This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-05-10 11:32:08 +02:00
Wolfgang Denk 4d31cdc45d Avoid infinite loop "Generating include/autoconf.mk"
Fix a bogus circular dependency that caused an infinite loop of
"Generating include/autoconf.mk" again and again.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-09 10:16:13 +02:00
Gary Jennejohn 73ccb3410a ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
Signed-off-by: Gary Jennejohn <garyj@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-05-08 16:44:01 +02:00
Wolfgang Denk 6adf61dc4c Prepare for v1.3.3-rc3
Update ChNAGELOG, minor white space cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-04 12:10:33 +02:00
Mike Frysinger aa737945e6 version_autogenerated.h: use printf rather than echo -n
Some systems are dumb and do not implement the -n flag to echo (like OS X).
Convert the Makefile to use printf as this should work everywhere.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-04 00:28:37 +02:00
Wolfgang Denk de109d9097 Makefile: fix parallel builds
This problem shows up with parallel builds only; it results in
somewhat cryptic error messages like

	$ JOBS=-j6 MAKEALL netstar
	Configuring for netstar board...
	arm-linux-ld: cannot find -lgeneric
	make[1]: *** [eeprom.srec] Error 1

A few boards (like netstar and voiceblue) need some libraries for
building; however, the board Makefile does not contain any such
dependencies which may cause problems with parallel builds. Adding
such dependencies is difficult as we would also have to provide build
rules, which already exist in the respective library Makefiles.

To solve this, we make sure that all libraries get built before the
board code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-30 17:25:07 +02:00
Wolfgang Denk b7fcc4c139 Prepare v1.3.3-rc2
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-29 23:35:24 +02:00
Wolfgang Denk fd7531c1e9 Prepare v1.3.3-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-26 01:55:00 +02:00
Wolfgang Denk 4b7a6dd896 Merge branch 'master' of /home/wd/git/u-boot/lwmon5
Conflicts:

	common/cmd_bootm.c
	common/cmd_log.c
	include/common.h
	post/board/lwmon5/Makefile
	post/board/lwmon5/dsp.c
	post/board/lwmon5/dspic.c
	post/board/lwmon5/fpga.c
	post/board/lwmon5/gdc.c
	post/board/lwmon5/sysmon.c
	post/board/lwmon5/watchdog.c

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-25 11:32:01 +02:00
Mike Frysinger 89cdab788f crc32: use uint32_t rather than unsigned long
The envcrc.c does sizeof(unsigned long) when calculating the crc, but
this is done with the build toolchain instead of the target tool
chain, so if the build is a 64bit system but the target is 32bits,
the size will obviously be wrong. This converts all unsigned long
stuff related to crc32 to uint32_t types. Compile tested only: output
of ./tools/envcrc when run on a 32bit build system matches that of a
64bit build system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-24 13:18:17 +02:00
Wolfgang Denk 58c5376ba6 Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx 2008-04-22 17:21:24 +02:00
Yuri Tikhonov 2d2b994a30 POST: move CONFIG_POST to Makefiles
Introduce the new logical option CONFIG_HAS_POST which is set when the
platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
to determine should the POST libs be compiled for the selected target
platform, or not.

To avoid breaking u-boot linking process, the empty post/libpost.a file is
created for platforms which do not have POSTs.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-22 14:40:19 +02:00
Wolfgang Denk dc7746d86d Makefile: remove nand_spl/System.map when cleaning up. 2008-04-20 15:39:38 -07:00
Guennadi Liakhovetski b5dc9b304d Support for the MX31ADS evaluation board from Freescale
This patch adds support for the MX31ADS evaluation board from Freescale,
initialization code is copied from RedBoot sources, also provided by
Freescale.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-18 10:05:14 -07:00
Stefan Roese fe7c0db6b2 ppc4xx: Add Glacier NAND booting target
Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-18 16:30:34 +02:00
Ulf Samuelsson a4b46ed6b3 Reorder ARM boards in Makefile
Rearrange ARM boards in Makefile so that ARM926EJ-S boards
are no longer under ARM92xT header.

Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-04-18 00:25:47 -07:00
Vlad Lungu c3aafd8cf8 Fix dependency generation for older gcc versions
With gcc 3.3.3 at least, compilation fails with

Generating include/autoconf.mk
gcc: compilation of header file requested
make: *** [include/autoconf.mk] Error 1

since commit 16fe77752e.

Signed-off-by: Vlad Lungu <vlad@comsys.ro>
2008-04-18 00:06:41 -07:00
Kumar Gala f8f9dc9888 Allow use of ARCH=powerpc when building
The linux kernel is now mostly ARCH=powerpc, so to make life easier
allow use to use ARCH=powerpc and convert it to ARCH=ppc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-13 23:18:21 -07:00
Guennadi Liakhovetski 61525f2ffa Support for LinkStation / KuroBox HD and HG PPC models
This patch is based on the port by Mihai Georgian (see linkstation.c for
Copyright information) and implements support for LinkStation / KuroBox HD
and HG PPC models from Buffalo Technology, whereby HD is deactivated at
the moment, pending network driver fixing.

Notice to users: this is pretty much a barebone port. Support for network
on HG models is already in the U-Boot mainline, but you might also want
patches to switch fan / phy modes depending on the negotiated ethernet
parameters. This patch also doesn't support console switching, booting EM
mode, Buffalo specific ext2 magic number. So, if you want to use any of
those, you need additional patches. Otherwise this patche provides a fully
functional u-boot with a network console on your system.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13 23:08:40 -07:00
Sascha Hauer 5ad862166a Phytec Phycore-i.MX31 support
This patch adds support for the Phytec Phycore-i.MX31 board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13 14:29:18 -07:00
Sascha Hauer caebc95be3 mx31 litekit support
This patch adds support for the mx31 litekit board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13 14:28:24 -07:00
Sascha Hauer 5252ed9520 Separate omap24xx specific code from arm1136
Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
to cpu/arm1136/omap24xx.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13 14:15:15 -07:00
Wolfgang Denk 58a3cbbf24 Merge branch 'master' of git://www.denx.de/git/u-boot-sparc 2008-04-13 09:21:00 -07:00
Wolfgang Denk 950a392464 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd635
	7a837b7310
	c88ae20580
	a147e56f03
	d6674e0e2a
	8c8463cce4
	c98b47ad24
	8bf69d8178
	8c16cb0d3b
	a574a73852
	1377b5583a
	1704dc2091

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-11 15:11:26 +02:00
Daniel Hellstrom ab68f921d9 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:33 +00:00
Daniel Hellstrom 6ed8a43a19 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:33 +00:00
Daniel Hellstrom 6940383d9e SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Daniel Hellstrom 823edd8a66 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Daniel Hellstrom 71d7e4c048 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Daniel Hellstrom b330990c2f SPARC: Added support for SPARC LEON2 SOC Processor.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Daniel Hellstrom 1e9a164e22 SPARC: Added support for SPARC LEON3 SOC processor.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Daniel Hellstrom c2f02da21a SPARC: Added generic support for SPARC architecture.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2008-04-08 07:58:32 +00:00
Wolfgang Denk a1b215e2a2 Merge branch 'master' of git://www.denx.de/git/u-boot-at91 2008-04-08 00:16:36 +02:00
Wolfgang Denk 2c78febd11 Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-04-08 00:10:17 +02:00
Wolfgang Denk 34e6cb8d1d Merge branch 'master' of git://www.denx.de/git/u-boot-blackfin 2008-04-08 00:06:47 +02:00
Wolfgang Denk 62479b1814 Merge branch 'master' of git://www.denx.de/git/u-boot-arm 2008-04-08 00:05:42 +02:00
Wolfgang Denk 5c395393cc Merge branch 'master' of git://www.denx.de/git/u-boot-sh 2008-04-08 00:04:39 +02:00
Stelian Pop 0176d43e75 Add support for AT91SAM9260EK
Support for booting from internal DataFlash, external DataFlash card
or NAND flash is available.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:46:12 +02:00
Stelian Pop a8a78f2d99 Move at91cap9 specific files to at91sam9 directory
AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.

Signed-off-by: Stelian Pop <stelian@popies.net>
2008-04-01 01:44:18 +02:00
TsiChung Liew 48ead7a7a9 ColdFire: Remove R5200 board
This board never went into production

Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
2008-03-31 15:10:24 -06:00
Matthew Fettke 545c8e0a7c ColdFire: Added M5275EVB support.
Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: John Rigby <jrigby@freescale.com>
2008-03-31 15:10:11 -06:00
Mike Frysinger 9171fc8172 Blackfin: unify cpu and boot modes
All of the duplicated code for Blackfin processors and boot modes have been
unified.  After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-03-30 15:50:19 -04:00
Guennadi Liakhovetski 7a837b7310 Support for the MX31ADS evaluation board from Freescale
This patch adds support for the MX31ADS evaluation board from Freescale,
initialization code is copied from RedBoot sources, also provided by Freescale.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-03-30 11:32:30 +01:00
Sascha Hauer c88ae20580 Phytec Phycore-i.MX31 support
This patch adds support for the Phytec Phycore-i.MX31 board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-03-30 11:32:27 +01:00
Sascha Hauer a147e56f03 mx31 litekit support
This patch adds support for the mx31 litekit board

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-03-30 11:32:24 +01:00
Sascha Hauer 8bf69d8178 Separate omap24xx specific code from arm1136
Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-03-30 11:28:46 +01:00
Pieter Voorthuijsen a574a73852 Adds support for the Prodrive PMDRA board, based on a DM6441
Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
2008-03-30 11:21:58 +01:00
Nobuhiro Iwamatsu f5e2466f7b sh: Add support Renesas Solutions R2D plus board
R2D plus is SH reference board used with SH7751R.
This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
one PCI bus, VGA, and two Ethernet controller.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:13 +09:00
Mark Jonas 3313e0e262 sh: Added support for SH7720 based board MPR2.
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:12 +09:00
Yusuke Goda c133c1fb0b sh: Add support Renesas Solutions R7780MP
Renesas Solutions R7780MP is a reference board on SH7780.
This board has serial, 10/100 base Ethernet deivice, CF slot
and VGA devices. This board can set extension board.
Extension board has 10/100/1000 base Ethernet device, PCI slot,
S-ATA, iDVR slot.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:12 +09:00
goda.yusuke c2042f5952 sh: Add support Renesas Solutions Migo-R board
Migo-R is a board based on SH7722 and has may devices.
In this patch, supported SCIF, NOR flash and Ethernet.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2008-03-28 14:16:11 +09:00
Stefan Roese 4c9e855734 ppc4xx: Add AMCC Glacier 406GT eval board support
This patch adds support for the AMCC Glacier 460GT eval board.
The main difference to the Canyonlands board are listed here:

- 4 ethernet ports instead of 2
- no SATA port
- no USB port

Currently EMAC2+3 are not working. This will be fixed in a later
release.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-27 09:54:41 +01:00
Bartlomiej Sieka 27f33e9f45 Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing
Conflicts:

	common/cmd_bootm.c
	cpu/mpc8xx/cpu.c

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2008-03-26 09:38:06 +01:00
Wolfgang Denk 6525489323 Merge branch 'master' of git://www.denx.de/git/u-boot-mips 2008-03-26 00:44:52 +01:00
Kyungmin Park 1bb707c39a Add Flex-OneNAND booting support
Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
using a NOR Flash interface. This on-chip integration enables system designers
to reduce external system logic and use high-density NAND Flash
in applications that would otherwise have to use more NOR components.

Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
in more flexible way. While MLC area of Flex-OneNAND can be used to store data
that require low reliability and high density, SLC area of Flex-OneNAND
to store data that need high reliability and high performance. Flex-OneNAND
can let users take advantage of storing these two different types of data
into one chip, which is making Flex-OneNAND more cost- and space-effective.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-03-26 00:05:32 +01:00
Jon Loeliger aa3511e422 FSL: Move board/mpc8266ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:40 +01:00
Jon Loeliger 7f1d846e5c FSL: Move board/mpc7448hpc2 under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:36 +01:00
Jon Loeliger b7e24d283e FSL: Move board/mpc8260ads under board/freescale
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-25 23:00:00 +01:00
Shinya Kuribayashi 8a77398395 [MIPS] Move gth2_config from ARM section to MIPS
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2008-03-25 21:30:08 +09:00
Stefan Roese 71665ebf88 ppc4xx: Add Canyonlands NAND booting support
460EX doesn't support a fixed bootstrap option to boot from 512 byte page
NAND devices. The only bootstrap option for NAND booting is option F for
2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
EEPROM needs to be programmed accordingly.

This patch adds basic NAND booting support for the AMCC Canyonlands aval
board and also adds support to the "bootstrap" command, to enable NAND
booting I2C setting.

Tested with 512 byte page NAND device (32MByte) on Canyonlands.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:05 +01:00
Stefan Roese c813f1f835 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:05 +01:00