OMAP3: Add common power code, README, and BeagleBoard
Add BeagleBoard support, common power code and README. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
This commit is contained in:
Dirk Behme
Jean-Christophe PLAGNIOL-VILLARD
parent
d5254f149d
commit
f904cdbb68
|
|
@ -486,6 +486,10 @@ Rowel Atienza <rowel@diwalabs.com>
|
|||
|
||||
armadillo ARM720T
|
||||
|
||||
Dirk Behme <dirk.behme@gmail.com>
|
||||
|
||||
omap3_beagle ARM CORTEX-A8 (OMAP3530 SoC)
|
||||
|
||||
Rishi Bhattacharya <rishi@ti.com>
|
||||
|
||||
omap5912osk ARM926EJS
|
||||
|
|
|
|||
28
MAKEALL
28
MAKEALL
|
|
@ -544,6 +544,13 @@ LIST_ARM11=" \
|
|||
smdk6400 \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
## ARM Cortex-A8 Systems
|
||||
#########################################################################
|
||||
LIST_ARM_CORTEX_A8=" \
|
||||
omap3_beagle \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
## AT91 Systems
|
||||
#########################################################################
|
||||
|
|
@ -598,15 +605,16 @@ LIST_ixp=" \
|
|||
## ARM groups
|
||||
#########################################################################
|
||||
|
||||
LIST_arm=" \
|
||||
${LIST_SA} \
|
||||
${LIST_ARM7} \
|
||||
${LIST_ARM9} \
|
||||
${LIST_ARM10} \
|
||||
${LIST_ARM11} \
|
||||
${LIST_at91} \
|
||||
${LIST_pxa} \
|
||||
${LIST_ixp} \
|
||||
LIST_arm=" \
|
||||
${LIST_SA} \
|
||||
${LIST_ARM7} \
|
||||
${LIST_ARM9} \
|
||||
${LIST_ARM10} \
|
||||
${LIST_ARM11} \
|
||||
${LIST_ARM_CORTEX_A8} \
|
||||
${LIST_at91} \
|
||||
${LIST_pxa} \
|
||||
${LIST_ixp} \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -822,7 +830,7 @@ build_target() {
|
|||
for arg in $@
|
||||
do
|
||||
case "$arg" in
|
||||
arm|SA|ARM7|ARM9|ARM10|ARM11|at91|ixp|pxa \
|
||||
arm|SA|ARM7|ARM9|ARM10|ARM11|ARM_CORTEX_A8|at91|ixp|pxa \
|
||||
|avr32 \
|
||||
|blackfin \
|
||||
|coldfire \
|
||||
|
|
|
|||
7
Makefile
7
Makefile
|
|
@ -2904,6 +2904,13 @@ lpc2292sodimm_config: unconfig
|
|||
SMN42_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
|
||||
|
||||
#########################################################################
|
||||
## ARM CORTEX Systems
|
||||
#########################################################################
|
||||
|
||||
omap3_beagle_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
|
||||
|
||||
#########################################################################
|
||||
## XScale Systems
|
||||
#########################################################################
|
||||
|
|
|
|||
|
|
@ -0,0 +1,49 @@
|
|||
#
|
||||
# (C) Copyright 2000, 2001, 2002
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = $(obj)lib$(BOARD).a
|
||||
|
||||
COBJS := beagle.o
|
||||
|
||||
SRCS := $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,90 @@
|
|||
/*
|
||||
* (C) Copyright 2004-2008
|
||||
* Texas Instruments, <www.ti.com>
|
||||
*
|
||||
* Author :
|
||||
* Sunil Kumar <sunilsaini05@gmail.com>
|
||||
* Shashi Ranjan <shashiranjanmca05@gmail.com>
|
||||
*
|
||||
* Derived from Beagle Board and 3430 SDP code by
|
||||
* Richard Woodruff <r-woodruff2@ti.com>
|
||||
* Syed Mohammed Khasim <khasim@ti.com>
|
||||
*
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/mux.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include "beagle.h"
|
||||
|
||||
/******************************************************************************
|
||||
* Routine: board_init
|
||||
* Description: Early hardware init.
|
||||
*****************************************************************************/
|
||||
int board_init(void)
|
||||
{
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
|
||||
/* board id for Linux */
|
||||
gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
|
||||
/* boot param addr */
|
||||
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* Routine: misc_init_r
|
||||
* Description: Configure board specific parts
|
||||
*****************************************************************************/
|
||||
int misc_init_r(void)
|
||||
{
|
||||
gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
|
||||
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
|
||||
|
||||
power_init_r();
|
||||
|
||||
/* Configure GPIOs to output */
|
||||
writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
|
||||
writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
|
||||
GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
|
||||
|
||||
/* Set GPIOs */
|
||||
writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
|
||||
&gpio6_base->setdataout);
|
||||
writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
|
||||
GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/******************************************************************************
|
||||
* Routine: set_muxconf_regs
|
||||
* Description: Setting up the configuration Mux registers specific to the
|
||||
* hardware. Many pins need to be moved from protect to primary
|
||||
* mode.
|
||||
*****************************************************************************/
|
||||
void set_muxconf_regs(void)
|
||||
{
|
||||
MUX_BEAGLE();
|
||||
}
|
||||
|
|
@ -0,0 +1,376 @@
|
|||
/*
|
||||
* (C) Copyright 2008
|
||||
* Dirk Behme <dirk.behme@gmail.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
#ifndef _BEAGLE_H_
|
||||
#define _BEAGLE_H_
|
||||
|
||||
const omap3_sysinfo sysinfo = {
|
||||
SDP_3430_V1,
|
||||
SDP_3430_V2,
|
||||
DDR_STACKED,
|
||||
"3530",
|
||||
"OMAP3 Beagle board",
|
||||
#if defined(CONFIG_ENV_IS_IN_ONENAND)
|
||||
"OneNAND",
|
||||
#else
|
||||
"NAND",
|
||||
#endif
|
||||
};
|
||||
|
||||
/*
|
||||
* IEN - Input Enable
|
||||
* IDIS - Input Disable
|
||||
* PTD - Pull type Down
|
||||
* PTU - Pull type Up
|
||||
* DIS - Pull type selection is inactive
|
||||
* EN - Pull type selection is active
|
||||
* M0 - Mode 0
|
||||
* The commented string gives the final mux configuration for that pin
|
||||
*/
|
||||
#define MUX_BEAGLE() \
|
||||
/*SDRC*/\
|
||||
MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
|
||||
MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
|
||||
MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
|
||||
MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
|
||||
MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
|
||||
MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
|
||||
MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
|
||||
MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
|
||||
MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
|
||||
MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
|
||||
MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
|
||||
MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
|
||||
MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
|
||||
MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
|
||||
MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
|
||||
MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
|
||||
MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
|
||||
MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
|
||||
MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
|
||||
MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
|
||||
MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
|
||||
MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
|
||||
MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
|
||||
MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
|
||||
MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
|
||||
MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
|
||||
MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
|
||||
MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
|
||||
MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
|
||||
MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
|
||||
MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
|
||||
MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
|
||||
MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
|
||||
MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
|
||||
MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
|
||||
MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
|
||||
MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
|
||||
/*GPMC*/\
|
||||
MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
|
||||
MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
|
||||
MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
|
||||
MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
|
||||
MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
|
||||
MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
|
||||
MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
|
||||
MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
|
||||
MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
|
||||
MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
|
||||
MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
|
||||
MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
|
||||
MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
|
||||
MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
|
||||
MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
|
||||
MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
|
||||
MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
|
||||
MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
|
||||
MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
|
||||
MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
|
||||
MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
|
||||
MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
|
||||
MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
|
||||
MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
|
||||
MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
|
||||
MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
|
||||
MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
|
||||
MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
|
||||
MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
|
||||
MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
|
||||
MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
|
||||
MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
|
||||
MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\
|
||||
MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*SYS_nDMA_REQ3*/\
|
||||
MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\
|
||||
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\
|
||||
MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\
|
||||
MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
|
||||
MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
|
||||
MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
|
||||
MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
|
||||
MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
|
||||
MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
|
||||
MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
|
||||
MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
|
||||
/*DSS*/\
|
||||
MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
|
||||
MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
|
||||
MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
|
||||
MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
|
||||
MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
|
||||
MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
|
||||
MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
|
||||
MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
|
||||
MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
|
||||
MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
|
||||
MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
|
||||
MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
|
||||
MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
|
||||
MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
|
||||
MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
|
||||
MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
|
||||
MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
|
||||
MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
|
||||
MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
|
||||
MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
|
||||
MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
|
||||
MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
|
||||
MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
|
||||
MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
|
||||
MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
|
||||
MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
|
||||
MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
|
||||
MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
|
||||
/*CAMERA*/\
|
||||
MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\
|
||||
MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\
|
||||
MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
|
||||
MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\
|
||||
MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\
|
||||
MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\
|
||||
MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\
|
||||
MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\
|
||||
MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\
|
||||
MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\
|
||||
MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\
|
||||
MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\
|
||||
MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\
|
||||
MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\
|
||||
MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\
|
||||
MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\
|
||||
MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\
|
||||
MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
|
||||
MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
|
||||
MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
|
||||
MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
|
||||
MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
|
||||
MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\
|
||||
MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\
|
||||
/*Audio Interface */\
|
||||
MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
|
||||
MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\
|
||||
MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
|
||||
MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
|
||||
/*Expansion card */\
|
||||
MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
|
||||
MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
|
||||
MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
|
||||
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
|
||||
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
|
||||
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
|
||||
MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\
|
||||
MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\
|
||||
MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
|
||||
MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
|
||||
/*Wireless LAN */\
|
||||
MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
|
||||
MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\
|
||||
MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\
|
||||
MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\
|
||||
MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\
|
||||
MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\
|
||||
MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\
|
||||
MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\
|
||||
MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\
|
||||
MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
|
||||
/*Bluetooth*/\
|
||||
MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M4)) /*GPIO_140*/\
|
||||
MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M4)) /*GPIO_142*/\
|
||||
MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_141*/\
|
||||
MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_143*/\
|
||||
MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\
|
||||
MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
|
||||
MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\
|
||||
MUX_VAL(CP(UART2_RX), (IDIS | PTD | DIS | M4)) /*GPIO_147*/\
|
||||
/*Modem Interface */\
|
||||
MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
|
||||
MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \
|
||||
MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \
|
||||
MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
|
||||
MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT_RX*/\
|
||||
MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\
|
||||
MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY_RX*/\
|
||||
MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\
|
||||
MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\
|
||||
MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\
|
||||
MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\
|
||||
MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\
|
||||
MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\
|
||||
MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\
|
||||
MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\
|
||||
/*Serial Interface*/\
|
||||
MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\
|
||||
MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\
|
||||
MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
|
||||
MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
|
||||
MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
|
||||
MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
|
||||
MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
|
||||
MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
|
||||
MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
|
||||
MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\
|
||||
MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\
|
||||
MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\
|
||||
MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\
|
||||
MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\
|
||||
MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\
|
||||
MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\
|
||||
MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\
|
||||
MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\
|
||||
MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\
|
||||
MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\
|
||||
MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOMI*/\
|
||||
MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\
|
||||
MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\
|
||||
MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\
|
||||
/* USB EHCI (port 2) */\
|
||||
MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA2*/\
|
||||
MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA7*/\
|
||||
MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA4*/\
|
||||
MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA5*/\
|
||||
MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA6*/\
|
||||
MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA3*/\
|
||||
MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
|
||||
MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
|
||||
MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\
|
||||
MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\
|
||||
MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA0*/\
|
||||
MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA1*/\
|
||||
/*Control and debug */\
|
||||
MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
|
||||
MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\
|
||||
MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\
|
||||
MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\
|
||||
MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\
|
||||
MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\
|
||||
MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\
|
||||
MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\
|
||||
MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
|
||||
MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \
|
||||
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
|
||||
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
|
||||
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
|
||||
MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\
|
||||
MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
|
||||
MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA0*/\
|
||||
MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA1*/\
|
||||
MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA2*/\
|
||||
MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA7*/\
|
||||
MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA4*/\
|
||||
MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA5*/\
|
||||
MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA6*/\
|
||||
MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA3*/\
|
||||
MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\
|
||||
MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\
|
||||
MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\
|
||||
MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\
|
||||
MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\
|
||||
MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\
|
||||
MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\
|
||||
MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\
|
||||
MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\
|
||||
MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\
|
||||
MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\
|
||||
MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\
|
||||
MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\
|
||||
MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\
|
||||
MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\
|
||||
MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\
|
||||
MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\
|
||||
MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\
|
||||
MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\
|
||||
MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\
|
||||
MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\
|
||||
MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\
|
||||
MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\
|
||||
MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\
|
||||
MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\
|
||||
MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\
|
||||
MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\
|
||||
MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\
|
||||
MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\
|
||||
MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\
|
||||
MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\
|
||||
MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\
|
||||
MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\
|
||||
MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\
|
||||
MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\
|
||||
MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\
|
||||
MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\
|
||||
MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\
|
||||
MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\
|
||||
MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\
|
||||
MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\
|
||||
MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\
|
||||
MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
|
||||
MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\
|
||||
MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\
|
||||
MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\
|
||||
MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\
|
||||
MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\
|
||||
MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\
|
||||
MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\
|
||||
MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\
|
||||
MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\
|
||||
MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\
|
||||
MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\
|
||||
MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\
|
||||
MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\
|
||||
MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\
|
||||
MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\
|
||||
MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\
|
||||
MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\
|
||||
MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\
|
||||
MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\
|
||||
MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\
|
||||
MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\
|
||||
MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\
|
||||
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
|
||||
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
|
||||
#endif
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
#
|
||||
# (C) Copyright 2006
|
||||
# Texas Instruments, <www.ti.com>
|
||||
#
|
||||
# Beagle Board uses OMAP3 (ARM-CortexA8) cpu
|
||||
# see http://www.ti.com/ for more information on Texas Instruments
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
# Physical Address:
|
||||
# 8000'0000 (bank0)
|
||||
# A000/0000 (bank1)
|
||||
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
|
||||
# (mem base + reserved)
|
||||
|
||||
# For use with external or internal boots.
|
||||
TEXT_BASE = 0x80e80000
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
/*
|
||||
* January 2004 - Changed to support H4 device
|
||||
* Copyright (c) 2004 Texas Instruments
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_start)
|
||||
SECTIONS
|
||||
{
|
||||
. = 0x00000000;
|
||||
|
||||
. = ALIGN(4);
|
||||
.text :
|
||||
{
|
||||
cpu/arm_cortexa8/start.o (.text)
|
||||
*(.text)
|
||||
}
|
||||
|
||||
. = ALIGN(4);
|
||||
.rodata : { *(.rodata) }
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
|
||||
__exidx_start = .;
|
||||
.ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
|
||||
__exidx_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
.data : { *(.data) }
|
||||
|
||||
. = ALIGN(4);
|
||||
.got : { *(.got) }
|
||||
|
||||
__u_boot_cmd_start = .;
|
||||
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||
__u_boot_cmd_end = .;
|
||||
|
||||
. = ALIGN(4);
|
||||
__bss_start = .;
|
||||
.bss : { *(.bss) }
|
||||
_end = .;
|
||||
}
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
ifneq ($(OBJTREE),$(SRCTREE))
|
||||
$(shell mkdir -p $(obj)board/$(VENDOR)/common)
|
||||
endif
|
||||
|
||||
LIB = $(obj)lib$(VENDOR).a
|
||||
|
||||
COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o
|
||||
|
||||
COBJS := $(COBJS-y)
|
||||
SRCS := $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
|
||||
all: $(LIB)
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS)
|
||||
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,74 @@
|
|||
/*
|
||||
* (C) Copyright 2004-2008
|
||||
* Texas Instruments, <www.ti.com>
|
||||
*
|
||||
* Author :
|
||||
* Sunil Kumar <sunilsaini05@gmail.com>
|
||||
* Shashi Ranjan <shashiranjanmca05@gmail.com>
|
||||
*
|
||||
* Derived from Beagle Board and 3430 SDP code by
|
||||
* Richard Woodruff <r-woodruff2@ti.com>
|
||||
* Syed Mohammed Khasim <khasim@ti.com>
|
||||
*
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
#include <common.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <i2c.h>
|
||||
|
||||
/******************************************************************************
|
||||
* Routine: power_init_r
|
||||
* Description: Configure power supply
|
||||
*****************************************************************************/
|
||||
void power_init_r(void)
|
||||
{
|
||||
unsigned char byte;
|
||||
|
||||
#ifdef CONFIG_DRIVER_OMAP34XX_I2C
|
||||
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Configure OMAP3 supply voltages in power management
|
||||
* companion chip.
|
||||
*/
|
||||
|
||||
/* set VAUX3 to 2.8V */
|
||||
byte = DEV_GRP_P1;
|
||||
i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEV_GRP, 1, &byte, 1);
|
||||
byte = VAUX3_VSEL_28;
|
||||
i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEDICATED, 1, &byte, 1);
|
||||
|
||||
/* set VPLL2 to 1.8V */
|
||||
byte = DEV_GRP_ALL;
|
||||
i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEV_GRP, 1, &byte, 1);
|
||||
byte = VPLL2_VSEL_18;
|
||||
i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEDICATED, 1, &byte, 1);
|
||||
|
||||
/* set VDAC to 1.8V */
|
||||
byte = DEV_GRP_P1;
|
||||
i2c_write(PWRMGT_ADDR_ID4, VDAC_DEV_GRP, 1, &byte, 1);
|
||||
byte = VDAC_VSEL_18;
|
||||
i2c_write(PWRMGT_ADDR_ID4, VDAC_DEDICATED, 1, &byte, 1);
|
||||
|
||||
/* enable LED */
|
||||
byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON;
|
||||
i2c_write(PWRMGT_ADDR_ID3, LEDEN, 1, &byte, 1);
|
||||
}
|
||||
|
|
@ -0,0 +1,72 @@
|
|||
|
||||
Summary
|
||||
=======
|
||||
|
||||
This README is about U-Boot support for TI's ARM Cortex-A8 based OMAP3 [1]
|
||||
family of SoCs. TI's OMAP3 SoC family contains an ARM Cortex-A8. Additionally,
|
||||
some family members contain a TMS320C64x+ DSP and/or an Imagination SGX 2D/3D
|
||||
graphics processor and various other standard peripherals.
|
||||
|
||||
Currently the following boards are supported:
|
||||
|
||||
* OMAP3530 BeagleBoard [2]
|
||||
|
||||
Toolchain
|
||||
=========
|
||||
|
||||
While ARM Cortex-A8 support ARM v7 instruction set (-march=armv7a) we compile
|
||||
with -march=armv5 to allow more compilers to work. For U-Boot code this has
|
||||
no performance impact.
|
||||
|
||||
Build
|
||||
=====
|
||||
|
||||
* BeagleBoard:
|
||||
|
||||
make omap3_beagle_config
|
||||
make
|
||||
|
||||
Custom commands
|
||||
===============
|
||||
|
||||
To make U-Boot for OMAP3 support NAND device SW or HW ECC calculation, U-Boot
|
||||
for OMAP3 supports custom user command
|
||||
|
||||
nandecc hw/sw
|
||||
|
||||
To be compatible with NAND drivers using SW ECC (e.g. kernel code)
|
||||
|
||||
nandecc sw
|
||||
|
||||
enables SW ECC calculation. HW ECC enabled with
|
||||
|
||||
nandecc hw
|
||||
|
||||
is typically used to write 2nd stage bootloader (known as 'x-loader') which is
|
||||
executed by OMAP3's boot rom and therefore has to be written with HW ECC.
|
||||
|
||||
For all other commands see
|
||||
|
||||
help
|
||||
|
||||
Acknowledgements
|
||||
================
|
||||
|
||||
OMAP3 U-Boot is based on U-Boot tar ball [3] for BeagleBoard and EVM done by
|
||||
several TI employees.
|
||||
|
||||
Links
|
||||
=====
|
||||
|
||||
[1] OMAP3:
|
||||
|
||||
http://www.ti.com/omap3 (high volume) and
|
||||
http://www.ti.com/omap35x (broad market)
|
||||
|
||||
[2] OMAP3530 BeagleBoard:
|
||||
|
||||
http://beagleboard.org/
|
||||
|
||||
[3] TI OMAP3 U-Boot:
|
||||
|
||||
http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
|
||||
|
|
@ -0,0 +1,325 @@
|
|||
/*
|
||||
* (C) Copyright 2006-2008
|
||||
* Texas Instruments.
|
||||
* Richard Woodruff <r-woodruff2@ti.com>
|
||||
* Syed Mohammed Khasim <x0khasim@ti.com>
|
||||
*
|
||||
* Configuration settings for the TI OMAP3530 Beagle board.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
#include <asm/sizes.h>
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
|
||||
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
||||
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
|
||||
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
|
||||
#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */
|
||||
|
||||
#include <asm/arch/cpu.h> /* get chip and board defs */
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
#define CONFIG_REVISION_TAG 1
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */
|
||||
/* Sector */
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K)
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
|
||||
/* initial data */
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
|
||||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
||||
#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
||||
115200}
|
||||
#define CONFIG_MMC 1
|
||||
#define CONFIG_OMAP3_MMC 1
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
|
||||
/* commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
||||
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#define CONFIG_CMD_NAND /* NAND support */
|
||||
|
||||
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
||||
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
||||
#undef CONFIG_CMD_IMI /* iminfo */
|
||||
#undef CONFIG_CMD_IMLS /* List all found images */
|
||||
#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
||||
#undef CONFIG_CMD_NFS /* NFS support */
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_SLAVE 1
|
||||
#define CONFIG_SYS_I2C_BUS 0
|
||||
#define CONFIG_SYS_I2C_BUS_SELECT 1
|
||||
#define CONFIG_DRIVER_OMAP34XX_I2C 1
|
||||
|
||||
/*
|
||||
* Board NAND Info.
|
||||
*/
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
|
||||
/* to access nand */
|
||||
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
|
||||
/* to access nand at */
|
||||
/* CS0 */
|
||||
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
|
||||
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
|
||||
/* devices */
|
||||
#define SECTORSIZE 512
|
||||
|
||||
#define NAND_ALLOW_ERASE_ALL
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define NAND_NO_RB 1
|
||||
#define CONFIG_SYS_NAND_WP
|
||||
|
||||
#define CONFIG_JFFS2_NAND
|
||||
/* nand device jffs2 lives on */
|
||||
#define CONFIG_JFFS2_DEV "nand0"
|
||||
/* start of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_OFFSET 0x680000
|
||||
#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
|
||||
/* partition */
|
||||
|
||||
/* Environment information */
|
||||
#define CONFIG_BOOTDELAY 10
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x82000000\0" \
|
||||
"console=ttyS2,115200n8\0" \
|
||||
"videomode=1024x768@60,vxres=1024,vyres=768\0" \
|
||||
"videospec=omapfb:vram:2M,vram:4M\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"video=${videospec},mode:${videomode} " \
|
||||
"root=/dev/mmcblk0p2 rw " \
|
||||
"rootfstype=ext3 rootwait\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"video=${videospec},mode:${videomode} " \
|
||||
"root=/dev/mtdblock4 rw " \
|
||||
"rootfstype=jffs2\0" \
|
||||
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"autoscr ${loadaddr}\0" \
|
||||
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"nand read ${loadaddr} 280000 400000; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"if mmcinit; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run nandboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run nandboot; fi"
|
||||
|
||||
#define CONFIG_AUTO_COMPLETE 1
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define V_PROMPT "OMAP3 beagleboard.org # "
|
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_SYS_PROMPT V_PROMPT
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
|
||||
/* works on */
|
||||
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
||||
0x01F00000) /* 31MB */
|
||||
|
||||
#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
|
||||
/* load address */
|
||||
|
||||
/*
|
||||
* 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
|
||||
* 32KHz clk, or from external sig. This rate is divided by a local divisor.
|
||||
*/
|
||||
#define V_PVT 7
|
||||
|
||||
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
|
||||
#define CONFIG_SYS_PVT V_PVT /* 2^(pvt+1) */
|
||||
#define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PVT))
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Stack sizes
|
||||
*
|
||||
* The stack sizes are set up in start.S using the settings below
|
||||
*/
|
||||
#define CONFIG_STACKSIZE SZ_128K /* regular stack */
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
|
||||
#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/* SDRAM Bank Allocation method */
|
||||
#define SDRC_R_B_C 1
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
|
||||
/* **** PISMO SUPPORT *** */
|
||||
|
||||
/* Configure the PISMO */
|
||||
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
|
||||
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
|
||||
/* one chip */
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
|
||||
#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE boot_flash_base
|
||||
|
||||
/* Monitor at start of flash */
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
||||
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
|
||||
#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
|
||||
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
|
||||
#define CONFIG_ENV_OFFSET boot_flash_off
|
||||
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* CFI FLASH driver setup
|
||||
*/
|
||||
/* timeout values are in ticks */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
|
||||
|
||||
/* Flash banks JFFS2 should use */
|
||||
#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
|
||||
CONFIG_SYS_MAX_NAND_DEVICE)
|
||||
#define CONFIG_SYS_JFFS2_MEM_NAND
|
||||
/* use flash_info[2] */
|
||||
#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
|
||||
#define CONFIG_SYS_JFFS2_NUM_BANKS 1
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
extern gpmc_csx_t *nand_cs_base;
|
||||
extern gpmc_t *gpmc_cfg_base;
|
||||
extern unsigned int boot_flash_base;
|
||||
extern volatile unsigned int boot_flash_env_addr;
|
||||
extern unsigned int boot_flash_off;
|
||||
extern unsigned int boot_flash_sec;
|
||||
extern unsigned int boot_flash_type;
|
||||
#endif
|
||||
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr)\
|
||||
writel(d, &nand_cs_base->nand_cmd)
|
||||
#define WRITE_NAND_ADDRESS(d, adr)\
|
||||
writel(d, &nand_cs_base->nand_adr)
|
||||
#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
|
||||
#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
|
||||
|
||||
/* Other NAND Access APIs */
|
||||
#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
|
||||
while (0)
|
||||
#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
|
||||
while (0)
|
||||
#define NAND_DISABLE_CE(nand)
|
||||
#define NAND_ENABLE_CE(nand)
|
||||
#define NAND_WAIT_READY(nand) udelay(10)
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue