2fd9eb509d
Minor cleanup
2006-06-02 17:04:21 +02:00
5abc2c5d4c
Merge with /home/sr/git/u-boot/denx
2006-06-02 16:59:39 +02:00
e15cd6fdbe
Fix examples/Makefile; some build targets were lost
2006-06-02 16:47:10 +02:00
a4c8d1389f
Add support for PCS440EP board
...
Patch by Stefan Roese, 02 Jun 2006
2006-06-02 16:20:36 +02:00
62b8f54877
Fix watchdog handling in CFI flash driver
...
Just use udelay() when waiting for status changes which will
implicitely trigger the watchdog.
2006-06-02 11:46:20 +02:00
392c252efd
Fix PCI to memory window size problems on PM82x boards
...
We use the "automatic" mode that was used for the MPC8266ADS and
MPC8272 boards. Eventually this should be used on all boards?]
Patch by Wolfgang Grandegger, 17 Jan 2006
2006-05-30 23:32:44 +02:00
b9b2480f4f
Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
...
Patch by Stefan Roese, 29 May 2006
2006-05-30 17:45:30 +02:00
ba94a1bba3
* Update Intel IXP4xx support
...
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00
5770a1e488
Fix problem in PVR detection for 440GR
...
Patch by Stefan Roese, 18 May 2006
2006-05-18 19:21:53 +02:00
b62fa913d4
Fix gcc 3.4.x AFLAGS setting for m68k platform.
2006-05-17 12:18:48 +02:00
27333f8c34
Enable autoboot for M5271EVB board.
2006-05-17 12:16:26 +02:00
df3eece32d
Merge with /home/sr/git/u-boot/denx
2006-05-15 15:24:43 +02:00
56ced709af
Changed default ramdisk addr in yosemite/yellowstone ports
...
Patch by Stefan Roese, 15 May 2006
2006-05-15 15:11:20 +02:00
6516525083
Fix PCMCIA support on virtlab2
2006-05-15 13:52:51 +02:00
8cba090c58
Add support for VirtLab2 board
...
(needed because of differences in the PCMCIA hardware).
2006-05-12 16:15:46 +02:00
977b50f868
Minor cleanup.
2006-05-10 17:43:20 +02:00
278bc4b37f
Update yosemite configuration to enable flash write buffer support
...
Patch by Stefan Roese, 10 May 2006
2006-05-10 15:06:58 +02:00
f90a39213e
Fix compile warnings in common/xyzModem.c
...
Patch by Stefan Roese, 10 May 2006
2006-05-10 15:01:40 +02:00
512f8d5d78
Add support for AMCC 440EP Rev C and 440GR Rev B
...
Patch by John Otken, 08 May 2006
2006-05-10 14:10:41 +02:00
d1dd22f92e
OMAP 5912/OSK: update EMIFS CS1 timings:
...
Problems have been seen in the linux kernel's smc91x network driver
due to improper bus timings. The latest 2.6 OMAP kernels currently
have a workaround, but this fix belongs in u-boot.
Patch by Kevin Hilman, 13 Oct 2005
2006-05-10 11:49:37 +02:00
77f633425b
Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
...
Patch by Hiroki Kaminaga, 11 Mar 2006
2006-05-10 11:28:48 +02:00
6080a0eb63
Update omap5912osk board support
...
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912 "
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
2006-05-10 10:55:16 +02:00
4af099bda9
Fix watchdog issues for ColdFire boards.
2006-05-09 13:49:12 +02:00
1cfefe8cb6
Merge with /home/m8/git/u-boot
2006-05-09 13:46:55 +02:00
67a9468522
Merge with /home/wd/git/u-boot/master
2006-05-09 13:32:33 +02:00
78b123cd69
Add M5271EVB board support.
2006-05-09 11:54:44 +02:00
6f5155a95c
Make R5200 specific low level initialization board conditional.
2006-05-09 11:51:51 +02:00
b75ef85f42
Update CPU target identification strings for Coldfire family.
2006-05-09 11:45:31 +02:00
b4853b779e
Update register definitions for MCF5271.
2006-05-09 11:43:59 +02:00
0c056f0e27
Fix serial console support for MCF5271.
2006-05-09 11:37:13 +02:00
483a0cf804
Fixes for gcc 3.4 based m68k toolchain,
...
based on patch by Jate Sujjavanich.
2006-05-09 11:28:36 +02:00
f149d8643e
Fix lowboot support on MCC200 board
2006-05-05 00:59:28 +02:00
0cf7d8aa0b
Merge with git://git.kernel.org/pub/scm/boot/u-boot/galak/u-boot.git#mpc8349emds
2006-05-03 17:52:20 +02:00
cb0fdf3cfa
VoiceBlue update: use new MTD flash partitioning methods, use more
...
reasonable TEXT_BASE, update default environment and enable keyed
autoboot.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2006-05-03 08:34:03 +02:00
610cf3676e
Coding Style cleanup
2006-05-03 01:24:04 +02:00
da4849fb30
Write RTC seconds first to maintain settings integrity per
...
Maxim/Dallas DS1306 data sheet.
Patch by Alan J. Luse, 02 May 2006
2006-05-03 01:04:58 +02:00
983bebbea3
Scheduled for removal: strnicmp() which is unused
2006-05-03 01:00:39 +02:00
5720df78ad
add forgotten changes for the PLEB 2 Board.
...
Patch from David Snowdon, 13. Aug 2005
2006-05-02 07:51:46 +02:00
8546e23902
Declare load_serial_ymodem() when using CFG_CMD_LOADB.
...
Patch by Jon Loeliger, 01. May 2006
2006-05-02 00:11:25 +02:00
3577d3a33b
Fixed handling of bad checksums with "mkimage -l"
2006-04-28 21:24:32 +02:00
7a635e004e
Add support for Freescale M5271: Merge with /work/u-boot.mcf5271
2006-04-27 19:12:19 +02:00
0e0ef590b2
Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40
...
Patch from Scott McNutt, 11 Aug 2005
2006-04-26 08:13:18 +02:00
6ca24c64a5
Add support for BC3450 board
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-21 18:30:47 +02:00
8fe9bf61ef
Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
...
- Removed MPC8349ADS port
- Added PCI support to MPC8349ADS
- reworked memory map to allow mapping of all regions with BATs
Patch by Kumar Gala 20 Apr 2006
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-20 13:45:32 -05:00
a83531bb62
* Update PK1C20 board for Nios-II 5.0
...
Patch from Scott McNutt, 11 Aug 2005
-Update base addresses for standard configuration
-Eliminate use of CACHE_BYPASS in board code
2006-04-20 12:57:43 +02:00
7fd392c2d0
* Add EPCS Controller bootrom work-around for Nios-II
...
Patch from Scott McNutt 11, Aug 2005
-When booting from an epcs controller, the epcs bootrom may leave the
slave select in an asserted state causing soft reset hang. This
patch ensures slave select is negated at reset.
2006-04-20 12:49:05 +02:00
60e270a490
Fix I/O Macros and mini-app stubs for Nios-II
...
Patch by Scott McNutt 11, Aug 2005
-Fix asm/io.h macros
-Eliminate use of CACHE_BYPASS in cpu code
-Eliminate assembler warnings
-Fix mini-app stubs and force no small data
2006-04-20 12:38:41 +02:00
9acb626fc1
Add MCF5282 support (without preloader)
...
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
2006-04-20 08:42:42 +02:00
a367d42640
Update for NC650 board. Add NC650 based CP850 configuration.
...
Signed-off-by: dzu@denx.de <dzu@denx.de>
2006-04-19 11:52:46 +02:00
8419c01304
MPC5200: enable snooping of DMA transactions on XLB even if no PCI
...
is configured; othrwise DMA accesses aren't cache coherent which
causes for example USB to fail.
2006-04-18 11:05:03 +02:00
cf48eb9abd
Some code cleanup
2006-04-16 10:51:58 +02:00
807522fc9a
Merge with /home/hs/U-Boot/u-boot-dev
2006-04-16 10:27:31 +02:00
b81a4630a3
Fix Quad UART mapping on MCC200 board due to new HW revision
2006-04-13 16:35:22 +02:00
b28a31ca02
Merge with /home/m8/git/u-boot
2006-04-12 12:26:32 +02:00
ad88297e2f
* Fix dbau1x00 Board
...
- Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange Aug 10 2005
2006-04-11 14:53:29 +02:00
bb74140def
Fixes common/cmd_flash.c:
...
- fix some compiler/parser error, if using m68k tool chain
- optical fix for protect on/off all messages, if using more
then one bank
Patch by Jens Scharsig, 28 July 2005
2006-04-11 14:39:21 +02:00
5fbb2cd3b1
Update CHANGELOG
2006-04-06 11:35:18 +02:00
71b405df4e
Merge with /home/sr/git/u-boot/cfi-flash
2006-04-06 00:16:58 +02:00
197b049b8b
Merge with /home/sr/git/u-boot/4xx-sdram
2006-04-05 23:55:15 +02:00
db28ddb4da
Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
...
Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
2006-04-03 15:46:10 +02:00
534ff676a9
* Add support for ymodem protocol download
...
Patch by Stefano Babic, 29 Mar 2006
* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
Merge with /home/mk/8-benq/u-boot
2006-04-01 15:52:46 +02:00
2662b40cac
* Changes/fixes for drivers/cfi_flash.c:
...
- Add Intel legacy lock/unlock support to common CFI driver
On some Intel flash's (e.g. Intel J3) legacy unlocking is
supported, meaning that unlocking of one sector will unlock
all sectors of this bank. Using this feature, unlocking
of all sectors upon startup (via env var "unlock=yes") will
get much faster.
- Fixed problem with multiple reads of envronment variable
"unlock" as pointed out by Reinhard Arlt & Anders Larsen.
- Removed unwanted linefeeds from "protect" command when
CFG_FLASH_PROTECTION is enabled.
- Changed p3p400 board to use CFG_FLASH_PROTECTION
Patch by Stefan Roese, 01 Apr 2006
* Changes/fixes for drivers/cfi_flash.c:
- Correctly handle the cases where CFG_HZ != 1000 (several
XScale-based boards)
- Fix the timeout calculation of buffered writes (off by a
factor of 1000)
Patch by Anders Larsen, 31 Mar 2006
2006-04-01 13:44:14 +02:00
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
3511853943
Reorder CHANGELOG
2006-03-31 15:18:37 +02:00
62534beb2f
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
...
405 SDRAM: - The SDRAM parameters can now be defined in the board
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
Thanks to Andrea Marson from DAVE for this patch.
440 DDR: - Added function sdram_tr1_set to auto calculate the
TR1 value for the DDR.
- Added ECC support (see p3p440).
Patch by Stefan Roese, 17 Mar 2006
2006-03-31 14:32:07 +02:00
f6dbbe9864
Update CHANGELOG
2006-03-25 18:42:54 +01:00
05d8dce9d0
Enable Quad UART om MCC200 board.
2006-03-23 17:10:30 +01:00
5725f94aac
Cleanup MCC200 board configuration; omit non-existent stuff.
2006-03-21 01:58:07 +01:00
0b6ba547fa
Update CHANGELOG
2006-03-19 01:01:51 +01:00
0a112d8696
Merge with port of MPC8349EMDS board
2006-03-17 17:41:56 +01:00
09e4b0c5d3
Add support for Lite5200B board.
...
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-17 11:42:53 +01:00
d326f4a242
Add command for handling DDR ECC registers on MPC8349EE MDS board.
2006-03-16 15:19:35 +01:00
97f98001a3
Fix DDR ECC bit definitions for MPC83xx.
2006-03-16 14:35:32 +01:00
991425fe05
Add initial support for MPC8349E MDS board.
2006-03-14 16:24:38 +01:00
4c8d1ecce2
Add support for ECC DDR initialization on MPC83xx.
2006-03-14 16:23:35 +01:00
61f25155ac
Add DMA support for MPC83xx.
2006-03-14 16:14:48 +01:00
6d8ae5abb5
Add sync in do_reset() routine for MPC83xx after RPR register
...
was written to. It is need on some targets when BAT translation
is enabled.
2006-03-14 16:12:48 +01:00
e24e0f0744
Add bit definitions for MPC83xx DDR controller registers.
2006-03-14 16:03:46 +01:00
cd94ba397e
Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
2006-03-14 16:02:31 +01:00
a7c66ad2e5
Correct shift offsets in icache_status and dcache_status for MPC83xx.
2006-03-14 16:01:25 +01:00
6e53e27c50
Add support for DS1374 RTC chip.
2006-03-14 15:59:25 +01:00
ff7fefe679
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
...
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
2006-03-13 12:37:35 +01:00
86f5f0342d
Fix CHANGELOG entry (patch date)
2006-03-13 12:22:03 +01:00
15940c9af3
Change max size of uncompressed uImage's to 8MByte and add
...
CFG_BOOTM_LEN to adjust this setting.
As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
uImages was restricted to 4MBytes. This default size is now
increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
in the board config file.
Patch by Stefan Roese, 13 Mar 2006
2006-03-13 11:16:36 +01:00
f3fecfe6d7
Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
...
Patch by Stefan Roese, 13 Mar 2006
2006-03-13 09:43:01 +01:00
9a7b408c11
cpu/ppc4xx/start.S : exceptions are enabled after relocation
...
Patch by Cedric Vincent, 6 June 2005
2006-03-13 09:42:28 +01:00
9551530615
au1x00_eth.c: check malloc return value and abort if it failed
...
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13 01:00:22 +01:00
c15f80eaef
Change the sequence of events in soft_i2c.c:send_ack() to keep from
...
incorrectly generating start/stop conditions on the bus.
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13 00:50:48 +01:00
b38dbd4622
Fix bug in [id]cache_status commands for MPC85xx processors;
...
should look at LSB of L1CSRn registers to determine if L1 cache is
enabled, not the MSB.
Patch by Murray Jensen, 19 Jul 2005
2006-03-13 00:46:05 +01:00
f07217c9e2
Fix array overflow with fw_setenv on uninitialised environment
...
Patch by Murray Jensen, 15 Jul 2005
2006-03-12 23:27:46 +01:00
84c960ce6d
Add support for EmbeddedPlanet EP88x boards
...
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12 23:17:31 +01:00
763b5f34c3
Remove board specific configuration includes from the common xilinx
...
ethernet and iic adapter code.
Patch by Michael Libeskind, 12 Jul 2005
2006-03-12 23:13:27 +01:00
be5048f166
Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
...
Patch by Murray Jensen, 08 Jul 2005
2006-03-12 22:50:55 +01:00
ca27381df1
Add (some) definitions for the MPC85xx local bus controller
...
Patch by Murray Jensen, 08 Jul 2005
2006-03-12 22:45:47 +01:00
8123eee875
Add CPM2 I/O pin functions for MPC85xx processors
...
Patch by Murray Jensen, 08 Jul 2005
2006-03-12 22:41:33 +01:00
7c60908ffb
Fix compile problem
2006-03-12 22:14:20 +01:00
47705af5da
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads
2006-03-12 21:49:19 +01:00
795bee8496
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx
2006-03-12 21:33:52 +01:00
7b230f61db
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#pci
2006-03-12 21:31:38 +01:00
a3f0169880
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infr
2006-03-12 19:11:42 +01:00
3b2e4fd9b0
Add support for the DHCP vendor optional bootfile ( #67 ).
...
Ignores the vendor TFTP server name option (#66 ).
Patch by Murray Jensen, 30 Jun 2005
2006-03-12 18:26:46 +01:00
0346983290
Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
...
Patch by Andy Fleming, 14 Jun 2005
2006-03-12 18:09:47 +01:00
d8169c9f3b
Fix bad register definitions for LTX971 PHY on MPC85xx boards.
...
Patch by Gerhard Jaeger, 21 Jun 2005
2006-03-12 18:06:37 +01:00
0a3471fc78
Add netconsole and some more commands to RPXlite_DW board
...
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:57:35 +01:00
993a22756e
Fix bad declaration on pci_cfgfunc_nothing
...
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:54:11 +01:00
953c5b6f8b
Adjust "echo" as a default command
...
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:51:59 +01:00
23466d6a33
Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
...
Patch by KokHow Teh, 16 Jun 2005
2006-03-12 16:14:29 +01:00
74f92e6a3f
Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
...
Patch by Rick Bronson, 15 Jun 2005
2006-03-12 16:05:05 +01:00
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
1264b4050c
Avoid dereferencing NULL in find_cmd() if no valid commands were found
...
Patch by Andrew Dyer, 13 Jun 2005
2006-03-12 02:20:55 +01:00
0afe519a43
Add ADI Blackfin support
...
- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:
2006-03-12 02:10:00 +01:00
dc013d4640
Add loads of ntohl() in image header handling
...
Patch by Steven Scholz, 10 Jun 2005
2006-03-12 01:59:35 +01:00
8ff0208d31
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
...
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:55:43 +01:00
f47b661141
RPXlite configuration fixes
...
- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:48:55 +01:00
aba9f1af60
Memory configuration changes for ZPC.1900 board
...
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:45:44 +01:00
5797b821dc
Add support for Adder boards with 16MB SDRAM;
...
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:43:03 +01:00
7c54c7018e
Fix conditional for including ks8695eth driver
...
Patch by Greg Ungerer, 04 Jun 2005
2006-03-12 01:40:01 +01:00
92b197f0da
Fix Makefile: include config.mk only after CROSS_COMPILE is defined
...
Patch by Friedrich Lobenstock, 02 Jun 2005
2006-03-12 01:37:50 +01:00
82d716fd0d
Fix comment in common/soft_i2c.c
...
Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
2006-03-12 01:30:45 +01:00
611125a292
Cleanup compiler warnings.
...
Patch by Greg Ungerer, 21 May 2005
2006-03-12 01:23:43 +01:00
2281490485
Word alignment fixes for word aligned NS16550 UART
...
Patch by Jean-Paul Saman, 01 Mar 2005
2006-03-12 01:21:19 +01:00
d509b81210
Fix behaviour if gatewayip is not set
...
Patch by Robin Gilks, 23 Dec 2004
2006-03-12 01:13:30 +01:00
84ef51a632
Fix cleanup for netstart board.
...
Remove build results from repository
2006-03-12 00:04:20 +01:00
d52fb7e3d1
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
4367a01036
Update CHANGELOG
2006-03-11 19:15:27 +01:00
9c575e51de
Add support for Intel Monahans CPU on Zylonite and Delta boards
...
(This is Work in Progress!)
2006-03-07 00:33:28 +01:00
1f62bc2d08
Add support for TQM8260-AI boards.
2006-03-07 00:32:07 +01:00
bfc81252c0
Minor code cleanup
2006-03-06 13:03:37 +01:00
4e3ccd2692
Merge the new NAND code (testing-NAND brach); see doc/README.nand
...
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
f1ee982506
Add lowboot target to mcc200 board
...
Patch by Stefan Roese, 4 Mar 2006
2006-03-04 14:57:03 +01:00
aed9e2269c
Merge with /home/sr/git/u-boot/cfi-flash-fix
2006-03-02 12:30:17 +01:00
4f71866470
Make CFG_NO_FLASH work on ARM systems
...
Patch by Markus Klotzbuecher, 27 Feb 2006
2006-03-02 11:03:05 +01:00
f18e874ad5
Fix problem with flash_get_size() from CFI driver update
...
Patch by Stefan Roese, 1 Mar 2006
2006-03-01 17:00:49 +01:00
82f2e33a8d
Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
...
use hush shell.
2006-02-28 18:39:20 +01:00
f6c0068fc1
Merge with Stefan Roese's branch with CFI driver fixes
2006-02-28 16:42:50 +01:00
58ad497833
Convert mcc200 to use common CFI flash driver
...
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00
79b4cda076
Major CFI-FLASH driver update:
...
* Add env-variable "unlock" to handle initial state of sectors
(locked/unlocked).
Only the U-Boot image and it's environment is protected,
all other sectors are unprotected (unlocked) if flash
hardware protection is used (CFG_FLASH_PROTECTION) and
the environment variable "unlock" is set to "yes".
Patch by Stefan Roese, 28 Feb 2006
* Update drivers/cfi_flash.c:
- find_sector() called in both versions of flash_write_cfiword()
Patch by Peter Pearse, 27th Feb 2006
* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
Patch by Jose Maria Lopez, 16 Jan 2006
* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
* Changes/fixes for drivers/cfi_flash.c:
We *should* check if there are any error bits if the previous call
returned ERR_OK (Otherwise we will have output an error message in
flash_status_check() already.) The original code would only check for
error bits if flash_status_check() returns ERR_TIMEOUT.
Patch by Marcus Hall, 23 Aug 2005
* Changes/fixes for drivers/cfi_flash.c:
- Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
Patch by Sangmoon Kim, 19 Aug 2005
* Fixes for drivers/cfi_flash.c:
- Fix wrong timeout value usage in flash_status_check()
- Round write_tout up when converting to msec in flash_get_size()
- Remove clearing flash status at the end of flash_write_cfibuffer()
which sets Intel 28F640J3 flash back to command mode on CSB472
Patch by Tolunay Orkun, 02 July 2005
2006-02-28 15:29:58 +01:00
038ccac511
Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling.
2006-02-24 09:37:22 +01:00
9cdc838613
Merge with /home/hs/PanDacom/u-boot-dev
2006-02-22 01:59:13 +01:00
881a87ecba
Add GIT version information (commid ID) to untagged U-Boot versions
...
As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
of all unreleased (untagged) U-Boot images will be automatically
extended upon compiletime with a part of the GIT commit ID and
possibly with "dirty" if uncommited changes are detected.
Here an example for the resulting version:
"U-Boot 1.1.4-g3457ac18-dirty"
The version is now maintained in the toplevel Makefile and the
version headers are autogenerated.
Patch by Stefan Roese, 9 Feb 2006
2006-02-21 17:33:04 +01:00
654c2d2836
Merge with /home/sr/git/u-boot
2006-02-21 16:41:43 +01:00
075866d840
[Patch] Add basic support for the SMMACO4 Board from PanDaCom.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-02-20 17:34:12 +01:00
2688e2f972
Enable address translation on MPC83xx
...
Patch by Kumar Gala, 10 Feb 2006
2006-02-10 15:40:06 -06:00
79830d591a
Convert CPCI750 to use common CFI flash driver
...
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-08 15:54:15 +01:00
48a05a5188
Various changes to esd HH405 board specific files
...
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07 16:51:04 +01:00
84e106c09d
Update default environment for INKA4x00 board.
2006-02-07 15:18:25 +01:00
57cac1fa54
Cleanup U-Boot boot messages on ARM.
...
To match the U-Boot user interface on ARM platforms to the U-Boot
standard (as on PPC platforms), some messages with debug character
are removed from the default U-Boot build.
Enable DEBUG for lib_arm/board.c to enable debug messages.
New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
Patch by Stefan Roese, 24 Jan 2006
2006-01-29 19:12:41 +01:00
f8c3b4f310
Add ColdFire targets to MAKEALL script
2006-01-26 17:38:46 -05:00
3a108ed868
Add support for r5200 board
2006-01-26 17:37:59 -05:00
eacbd31775
Add support for Freescale M5271 processor
2006-01-26 17:35:56 -05:00
c99f384dce
Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
...
Patch by Kumar Gala, 25 Jan 2006
2006-01-25 16:12:46 -06:00
b970480948
Fixed defines for MPC83xx SICRL register to match current specs
...
Patch by Kumar Gala, 23 Jan 2006
2006-01-23 16:22:57 -06:00
18c5e64c5b
Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
...
Patch by Stefan Roese, 18 Jan 2006
2006-01-18 20:06:44 +01:00
a7b9fb9110
Add VGA support (CT69000) to CPCI750 board.
...
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18 20:05:34 +01:00
2076d0a15f
PMC405 and CPCI405: Moved configuration of pci resources into config file.
...
PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
c4b465f63e
Fix 28F256J3A support on PM520 board
...
(without bank-switching only 32 MB can be accessed)
2006-01-13 17:00:56 +01:00
86902b8e36
Added PCI support for MPC8349ADS board
...
Patch by Kumar Gala 11 Jan 2006
2006-01-12 19:51:38 -06:00
dffb70f330
Fixed PCI indirect config ops to handle multiple PCI controllers
...
We need to adjust the bus number we are trying to access based
on which PCI controller its on
Patch by Kumar Gala 12 Jan 2006
2006-01-12 15:30:24 -06:00
62ec6418d4
Add helper function for generic flat device tree fixups for mpc83xx
...
Patch by Kumar Gala 11 Jan 2006
2006-01-11 16:48:10 -06:00
e559a6901a
Add support for passing initrd information via flat device tree
...
Patch by Kumar Gala 11 Jan 2006
2006-01-11 16:41:35 -06:00
c2871f0380
Added OF_STDOUT_PATH and OF_SOC
...
OF_STDOUT_PATH specifies the path to the device the kernel can use
for console output
OF_SOC specifies the proper name of the SOC node if one exists.
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:59:02 -06:00
4e2531378f
Allow board code to fixup the flat device tree before booting a
...
kernel
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:54:17 -06:00
e4f880eddd
Added CONFIG_ options for bd_t and env in flat dev tree
...
CONFIG_OF_HAS_BD_T will put a copy of the bd_t
into the resulting flat device tree.
CONFIG_OF_HAS_UBOOT_ENV will copy the environment
variables from u-boot into the flat device tree
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:49:31 -06:00
3411d11761
Report back PCI bus when doing table based device config
...
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:27:19 -06:00
a179012e37
Added support for PCI prefetchable region and BARs
...
If a host controller sets up a region as prefetchable and
a device's BAR denotes it as prefetchable, allocate the
BAR into the prefetch region.
If a BAR is prefetchable and no prefetchable region has
been setup by the controller we fall back to allocating
the BAR into the normally memory region.
Patch by Kumar Gala 11 Jan 2006
2006-01-11 13:24:15 -06:00
ec00c33578
Only disable the MPC83xx watchdog if its enabled out of reset.
...
If its disabled out of reset SW can later enable it if so desired
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:23:01 -06:00
a15b44dbfa
Allow config of GPIO direction & data registers at boot on 83xx
...
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:21:14 -06:00
ce574ff506
Enable time handling on 83xx
...
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:19:12 -06:00
9260a56151
Make System IO Config Registers board configurable on MPC83xx
...
Patch by Kumar Gala, 11 Jan 2006
2006-01-11 11:12:57 -06:00
756ceb8935
Update CHANGELOG.
2006-01-11 13:04:53 +01:00
c7428d49ac
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
2005-12-29 15:12:09 +01:00
27e166b875
Fix compiler problem with at91rm9200dk board.
...
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
e6b6d16de7
Merge with /home/sr/git/u-boot
2005-12-16 17:39:27 +01:00
a9e642e2f8
MPC5200: Set PCI retry counter to 0 = infinite retry;
...
The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005
2005-12-16 15:14:18 +01:00
81a3170b15
Changes to Yellowstone & Yosemite 440EP/GR eval boards:
...
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
e43232dee8
Merge with /home/m8/git/u-boot
2005-12-14 15:05:59 +01:00
7481266e4e
2005-12-12 16:06:05 +01:00
3a7b142b62
Change port configuration for O2DNT (CODEC1 on PSC1)
2005-12-06 20:33:07 +01:00
a889bd27ef
Fix DPRAM offset/size for MPC8541/8555.
...
Simplify TQM85xx Makefile handling.
2005-12-06 15:02:31 +01:00
41253be442
Fix data overflow (typo?) in rtc/ds1302.c
2005-12-04 11:20:57 +01:00
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
2005-12-04 00:40:34 +01:00
c75eba3b41
Fix U-Boot compilation for MIPS boards using ELDK 4.0
2005-12-01 02:15:07 +01:00
4a86d779ff
Merge with /home/sr/git/u-boot
2005-12-01 01:38:13 +01:00
b6f8435664
Adjust TQM834x PHY addresses for latest hardware revision.
2005-12-01 01:17:24 +01:00
d00de23b15
Increase malloc arena on TQM5200 board to 256 kB.
...
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
2005-12-01 00:55:19 +01:00
d9785c14bf
Fix miiphy global data initialization (problem on 4xx boards when no
...
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().
Based on initial patch for 4xx platform by Matthias Fuchs.
2005-11-30 18:06:04 +01:00
d96f41e016
Add support for TQM8541/8555 boards, TQM85xx support reworked:
...
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
(TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
If problems are detected with this non default CAS latency,
the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
-> TSEC is first device.
Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
f08abe311b
Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
2005-11-25 16:38:03 +01:00
aa7cfc463a
Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
...
The COPYING file was extended to make clear that these files can be
used in non-GPL code, too.
2005-11-25 10:38:43 +01:00
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
fe126d8b34
Change all '$(...)' variable references into '${...}'
...
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
5a164c8ca9
Minor changes to init flags in TQM834x PCI.
2005-11-17 00:26:18 +01:00
3ca377638a
Add CHANGELOG entry
...
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:26:34 +01:00
feaedfcf84
New PPC 405EP board added: CMS700
...
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
ea339205a9
Updated PCI mapping for esd CPCI2DP board.
...
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
2005-11-08 09:00:09 +01:00
527b5a511c
Fix MPC85xx PCI support (pci_register_hose() before pci config access)
...
Patch by Stefan Roese, 07 Nov 2005
2005-11-07 13:43:06 +01:00
182e10691f
Correct PPC Timebase register definitions (SPRN_TBRL...)
...
Patch by Stefan Roese, 07 Nov 2005
2005-11-07 09:57:57 +01:00
f190c11b1f
Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
...
Patch by Stefan Roese, 05 Nov 2005
2005-11-05 15:50:16 +01:00
ef04a0aa26
Additional fix for external IRQ config on Yellowstone & Yosemite
...
Patch by Stefan Roese, 03 Nov 2005
2005-11-03 08:31:33 +01:00
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
d9f2f5008c
Merge with /git/u-boot.git
2005-11-01 10:02:21 +01:00
be360d9824
More verbose CHANGELOG entry.
2005-10-29 23:50:20 +02:00
5d4ee51061
Merge with /home/m8/git/u-boot
2005-10-29 23:45:04 +02:00
99eb35dbbf
Add missing CHANGELOG entries.
2005-10-29 14:48:59 +02:00
e190290ba4
Fix external IRQ configuration on Yellowstone & Yosemite
...
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).
Patch by Stefan Roese, 28 Oct 2005
2005-10-28 12:21:06 +02:00
7b5cac0e19
Merge with /home/wd/git/u-boot/master
2005-10-21 22:41:25 +02:00
e9f1110051
Add missing 4xx board to MAKEALL
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:40:17 +02:00
a547775bac
Fix conflicting types (flash_write()) in esd auto_update.c
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:39:16 +02:00
c4c13df284
Fix problem with sleep in NetConsole (use get_timer())
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:36:44 +02:00
1e25f957c8
Add NetConsole Support for AMCC eval boards
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:34:28 +02:00
a93316c5e9
Fix NetConsole support on 4xx (only print eth link on 1st transfer)
...
Patch by Stefan Roese, 18 Oct 2005
2005-10-18 19:17:12 +02:00
6902df56a0
Add PCI support for the TQM834x board.
2005-10-17 02:39:53 +02:00
326bf40fb7
Fix typo.
2005-10-17 00:24:00 +02:00
ea1fba136a
Merge with /home/sr/git/u-boot
2005-10-17 00:19:16 +02:00
20a374fe02
Add missing CHANGELOG entry.
2005-10-15 18:43:50 +02:00
3b6748ea0d
Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo
...
Patch by Stefan Roese, 14 Oct 2005
2005-10-14 15:37:34 +02:00
77ddac9480
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
17a8b276ba
Add documentation for Open Firmware Flat Tree and usage.
...
Patch by Pantelis Antoniou, 13 Oct 2005
2005-10-13 10:41:25 +02:00
814d98f24e
Add missing files for Pantelis Antoniou's patch
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:59:29 +02:00
cbdf8824fa
Merge with /home/sr/git/u-boot
2005-10-13 01:55:58 +02:00
070610c529
Add support for OF flat tree for the STXtc board.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:49:09 +02:00
f57f70aab9
Support passing of OF flat trees to the kernel.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
4f92ac3648
Fix problem in ppc4xx eth-driver without ethaddr (only without
...
CONFIG_NET_MULTI set)
Patch by Stefan Roese, 10 Oct 2005
2005-10-10 17:43:58 +02:00
3df5bea0b0
Add support for NetSilicon NS7520 processor.
...
Patch by Art Shipkowski, 12 May 2005
Cleanup.
2005-10-09 01:41:48 +02:00
7521af1c7d
Add support for AP1000 board.
...
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
95f9dda216
Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
...
Patch by Anders Larsen, 07 Oct 2005
The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
2005-10-09 00:33:37 +02:00
47340a46f6
Fixed compilation for ARM when using a (standard) hard-FP toolchain
...
Patch by Anders Larsen, 07 Oct 2005
2005-10-09 00:25:58 +02:00
96782c63d3
Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
...
sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005
2005-10-09 00:22:48 +02:00
c29ab9d71d
Fix gzip bmp support (test if malloc fails, warning when truncated).
...
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
2005-10-08 10:19:07 +02:00
87cb6862b9
Update make target for ARM supported boards.
...
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
bccae9039e
Fix booting from serial dataflash on AT91RM9200
...
Patch by Peter Menzebach, 29 Aug 2005
2005-10-06 01:50:50 +02:00
6ebc792114
Add JFFS2 support for TRAB board
...
Patch by Martin Krause, 25 Aug 2005
2005-10-06 01:46:57 +02:00
5ae31ee114
Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
...
Patch by Marcus Hall, 24 Aug 2005
2005-10-06 01:43:39 +02:00
f5c254d719
Fix the machine-id of the Cogent csb637 board
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:26:16 +02:00
78da60773c
Complete support for the KwikByte KB920x boards
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:22:22 +02:00
c0e82d5016
Set the AT91RM9200 clock to asynchronous mode
...
Patch by Anders Larsen, 03 May 2005
2005-10-05 02:06:08 +02:00
3b9dfddfd8
Set the AT91RM9200 clock to synchronous mode
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:02:25 +02:00
645da51097
Add support for Cogent csb637
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
fef636b0cf
Fix dm9161.c initialization
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 01:54:04 +02:00
080bdb7f3a
* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
...
Patch by Anders Larsen, 29 Apr 2005
* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
(8e2be51de8
2005-10-05 01:51:29 +02:00
29ca46c445
Fix device partition intialization for SystemACE disks.
...
Patch by Stephen Williams, 28 Apr 2005
2005-10-05 00:25:17 +02:00
99b0d2851a
Added support for KwikByte KB920x boards (based on AT91RM9200)
...
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
2005-10-05 00:19:34 +02:00
45237bc00b
Add support for S29GL064M-R3 flash chip on xsengine board
...
Patch by Kurt Stremerch, 18 Apr 2005
2005-10-05 00:03:55 +02:00
7d314992a8
E500 update: repoint IVPR to RAM when code is relocated
...
Patch by Kylo Ginsberg, 13 Apr 2005
2005-10-05 00:00:54 +02:00
e5e98edd77
Fix loop end test in lib_generic/string.c:strswab()
...
Patch by Andrew Dyer, October 10, 2005
Signed-off-by: Andrew Dyer <amdyer@gmail.com>
2005-10-04 23:38:07 +02:00
9b880bd4d8
Update ARM Integrator boards:
...
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
2005-10-04 23:10:28 +02:00
1820d4c73b
Make sure only supported compiler options are used
...
Import "cc-option" shell function from kernel and
use it to get the correct ARM GCC options for individual CPUs
Patch by Peter Pearse, 30 Jun 2005
2005-10-04 22:38:24 +02:00
9a8d82fd3c
Fix 440GR to print correct cpu revision
...
Patch by Stefan Roese, 4 Oct 2005
2005-10-04 15:00:30 +02:00
d843a575d7
Merge with /home/wd/git/u-boot/master
2005-10-03 15:42:25 +02:00
93b17ec382
Change board message on AMCC Yosemite & Yellowstone to common style
...
Patch by Stefan Roese, 3 Oct 2005
2005-10-03 15:27:50 +02:00
d9631ecf52
Fix compiler warning
2005-09-30 15:18:23 +02:00
709d8ec0d8
Fix FEC PHY addresses for TQM85xx boards
2005-09-29 12:16:38 +02:00
e98f68be94
Fix uninitialized variable problem in hush shell
...
Patch by Lars Rostock, 26 Sep 2005
2005-09-28 01:49:47 +02:00
fb34a9a201
Undo change of f6e20fc6ca... to include/configs/trab.h
...
(Must have been an accident?)
2005-09-26 23:40:37 +02:00
d8e7e0f044
Add support for AT91RM9200 OHCI Controller.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:26:56 +02:00
98404649c8
Update ARM mach-types.h
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:18:22 +02:00
0e4018d244
Add support for MP2USB board.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:14:38 +02:00
c570b2fdf5
Add board support for armadillo HT1070
...
Patch by Rowel Atienza, 06 Apr 2005
2005-09-26 01:06:33 +02:00
c2d0ab4da8
Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
...
Patch by Vitaly Bordug, 30 Mar 2005
2005-09-26 00:53:02 +02:00
e6f222815c
Add iopset command on mpc8xx
...
Patch by Daniel Eisenhut, 25 Mar 2005
2005-09-26 00:44:15 +02:00
a912733e9b
Add support for MII in eepro100 driver.
...
Patch by Gleb Natapov, 21 Mar 2005
2005-09-26 00:39:59 +02:00
f2af3eb55e
Fixes to the Lubbock (PXA 25x) support:
...
- Resolve the FIXME with respect to saving the u-boot environment.
- Make the default load address land in real memory.
- Fix lan91c96 SMC_{in,out}{b,w,l}() macros
Patch by David Brownell, 10 Mar 2005
2005-09-26 00:29:53 +02:00
8e6f1a8ec2
Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
...
Patch by Marc Leeman, 04 Mar 2005
2005-09-25 18:59:36 +02:00
716c1dcb41
Cleanup
2005-09-25 18:49:35 +02:00
49a7581c6c
OMAP242x H4 board update
...
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
2005-09-25 18:41:04 +02:00
8e2be51de8
Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
...
Patch by Steven Scholz, 02 Mar 2005
2005-09-25 17:14:20 +02:00
a188b5854f
Fix typo in eth.c
...
Patch by Ara Avanesyan, 24 Feb 2005
2005-09-25 17:05:57 +02:00
31466294b0
Remove unneeded #include <malloc.h>
...
Patch by Ladislav Michl, 22 Feb 2005
2005-09-25 17:02:27 +02:00
b66eb5282d
Add cramfs support for m68k
...
Patch by Zachary Landau, 21 Feb 2005
2005-09-25 16:59:36 +02:00
bd51626c8d
Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
...
Patch by Jeff Angielski, 21 Feb 2005
2005-09-25 16:56:15 +02:00
7a22cd535b
Fix au1x00_serial baud rate calculation:
...
remove hardcoded cpu clock divisor and use register instead;
round up instead of truncate
Patch by Andrew Dyer, 15 Feb 2005
2005-09-25 16:50:33 +02:00
875c78934e
Add Xilinx Spartan3 family FPGA support
...
Patch by Kurt Stremerch, 14 February 2005
2005-09-25 16:44:21 +02:00
db421e6451
Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
...
Patch by Zachary Landau, 11 Feb 2005
2005-09-25 16:41:22 +02:00
c177bb5f6c
Fix VOH405 Support
...
Patch by Matthias Fuchs, 25 Sep 2005
2005-09-25 16:31:16 +02:00
1972dc0a9e
Added support for PCI bridge on MPC8272ADS
...
Patch by Vitaly Bordug, Feb 09 2005
2005-09-25 16:27:55 +02:00
0148e8cb43
Update multicore CM9XX support for Integrator AP to allow booting from flash
...
Patch by Jean-Paul Saman, 8 Feb 2005
2005-09-25 16:22:14 +02:00
389db1f113
Fix strswab() to reliably find end of string
...
Patch by Andrew Dyer, 08 Feb 2005
2005-09-25 16:15:17 +02:00
6ed6ce62be
Fix typos in include/ppc440.h
...
Patch by Andrew E Mileski, 04 Feb 2005
2005-09-25 16:01:42 +02:00
2df741bf7c
Add Vibren (was Accelent) PXA255 IDP Support
...
Patch by Cliff Brake, 04 Feb 2005
2005-09-25 15:57:49 +02:00
fd4bb67bd2
Fix tools/bmp_logo.c using incorrect offset to pixel data
...
Patch by Andrew Dyer, 31 Jan 2005
2005-09-25 15:39:00 +02:00
74f4304ee7
Add ARM946E cpu and core module targets; remap memory to 0x00000000
...
Patch by Peter Pearse, 2 Feb 2005
2005-09-25 01:48:28 +02:00
e2146b6aea
Fix error handling in tools/env/fw_env.c
...
Patch by Ara Avanesyan, 01 Feb 2005
2005-09-25 01:20:38 +02:00
9f221d0738
Fix MGT5100 PSC baudrate calculation
...
Patch by Sebastian Schau, 27 Jan 2005
2005-09-25 01:09:58 +02:00
c97a2aaf27
OMAP242x fix for GP device booting
...
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
2005-09-25 00:59:24 +02:00
265817c7e6
Add support for AMD's Pb1x00 eval board;
...
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
b63de2c053
Update omap5912osk board:
...
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
2005-09-25 00:23:05 +02:00
3706ba1a36
Fix warnings for PCI code on ixp
...
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
9a9200b4a7
virtex2 fix for bogus download error messages
...
The virtex2 FPGA download code watches for init going active during
a download of config data as an error condition. init also goes
active after a configuration is finished in concert with the done
signal. So far, the code does not check for done active until all
of the configuration data is sent. If configuration data has a few
extra pad bytes at the end, this would cause an error message even
though the download had suceeded.
NOTE: virtex2 slave serial and spartan2 versions may still have the
same problem.
Patch by Andrew Dyer, 12 Jan 2005
2005-09-24 23:41:00 +02:00
dafbe3790e
Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
...
Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
message when probing for nonexistent flash in little endian mode.
As a side effect more efficient and smaller code is generated,
which is always a Good Thing (TM).
Patch by Ladislav Michl, 24 Sep 2005
2005-09-24 23:32:48 +02:00
28cb937584
Update for TFTP using a fixed UDP port
...
Use the approved environment variable names. Added "tftpdstp" to
allow ports other than 69 per Tolunay Orkun's recommendation.
Patch by Jerry Van Baren, 12 Jan 2005
2005-09-24 23:25:46 +02:00
ecb0ccd9c2
Allow to force TFTP to use a fixed UDP port
...
(Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpport)
Patch by Jerry Van Baren, 10 Jan 2005
2005-09-24 22:37:32 +02:00
4bc12f1ccf
Fix ethernet timeouts on dbau1550 and other au1x00 systems
...
Patch by Leif Lindholm, 29 Dec 2004
2005-09-24 22:05:40 +02:00
2b792afcc5
* Fix PHY address argument passing with mii info command
...
Patch by Andrew Dyer, 28 Dec 2004
* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
0c8721a466
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
a6e6cf0036
Merge with /home/wd/git/u-boot/work
2005-09-22 09:46:19 +02:00
1caa70788c
Cleanup - update CHANGELOG, undo test settings
2005-09-22 09:34:17 +02:00
7644f16f6b
esd CPCI2DP board added
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
026cb5d864
esd PMC405 board updated
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:07:15 +02:00
98f4a3dfcb
Add SM501 support to HH405 board.
...
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
2005-09-22 09:04:17 +02:00
8b4c9e7c14
Fix bug in auto_update (trab board)
...
Patch by Martin Krause, 16 Sep 2005
2005-09-21 15:31:25 +02:00
59d80bf180
Fix computation of framebuffer palette for 8bpp LCD bitmaps
...
Patch by Francesco Mandracci, 16 Sep 2005
2005-09-21 15:24:52 +02:00
1806c75959
Update configuration for INKA4x0 board
2005-09-21 10:07:56 +02:00
29fe1c0fa4
Update configuration for PM854 board
...
Based on patch by R. Loeffl, 20 Jul 2005
2005-09-21 09:59:55 +02:00
053b40fa0c
Add PCI support to TQM8540 and TQM8560 boards
...
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 14:41:11 +02:00
34c0a5e98b
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 11:34:07 +02:00
3edb0ccf61
Merge with /home/wd/git/u-boot/master
2005-09-14 17:06:43 +02:00
47278471f9
Merge with /home/sr/git/u-boot
2005-09-14 16:59:18 +02:00
e1b7296126
Add support for mtddevnum and mtddevname variables (mtdparts command)
...
[Merge with /home/m8/git/u-boot]
2005-09-13 00:20:45 +02:00
670d9f132d
Change default console baud rate for stxxtc board
2005-09-13 00:12:33 +02:00
7d45477bfa
Added support for mtddevnum and mtddevname variables (mtdparts command)
2005-09-11 15:27:12 +02:00
4a3cd9e655
Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
...
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
2005-09-07 16:21:12 +02:00
5d244ea128
Merge with /home/sr/git/u-boot:
...
Add I2C support for TQM85xx
2005-09-06 22:17:16 +02:00
80e238c7f0
Fix default command set (don't include CFG_CMD_DISPLAY command)
...
Patch by Pantelis Antoniou, 02 Sep 2005
2005-09-03 02:22:41 +02:00
6d51e505ad
Cleanup compiler warnings.
2005-09-03 01:58:35 +02:00
7b3e3c5954
Update CHANGELOG.
2005-09-03 01:23:25 +02:00
9d2a873bdf
Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
...
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
77f6580cc0
Update CHANGELOG file
2005-08-31 12:30:09 +02:00
61dada83f3
Minor reformatting
2005-08-24 12:41:18 +02:00
a3e4fcb860
Fixed bamboo port to enable running without DDR-DIMM (bamboo has also 64MB onboard DDR)
...
Patch by Stefan Roese, 24 Aug 2005
2005-08-24 11:21:36 +02:00
a9fe9f427d
Update CHANGELOG
2005-08-23 23:04:40 +02:00
2ac4785c2f
Fix make dependencies for at91rm9200 and ks8695 cpus
...
Patch by Steven Scholz, 23 Aug 2005
2005-08-23 22:29:44 +02:00
d534f5cc38
Add JFFS2 support for TQM5200 board
2005-08-23 22:27:41 +02:00
5e4b3361bc
Add esd cpci5200 and pf5200 boards
...
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00
94085698d0
Fix sysclock for TQM8540 and TQM8560 boards
...
Patch by Martin Krause, 25 Jul 2005
2005-08-19 00:55:12 +02:00
c7db9a3805
Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
...
Patch by Martin Krause, 08 Jun 2005
2005-08-19 00:53:02 +02:00
6617aae9b9
Add new board specific commands for TQM5200/STK52XX
...
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
2005-08-19 00:46:54 +02:00
df3c7c8f52
Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
...
because of a bug in the AT91RM9200 CPU PLL
Patch by Martin Krause, 22 Apr 2005
2005-08-19 00:36:45 +02:00
601aed1e8f
Add automatic HW detection for another CMC_PU2 variant
...
Patch by Martin Krause, 20 Apr 2005
2005-08-19 00:08:55 +02:00
dbc5819098
Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
...
Patch by Martin Krause, 19 Apr 2005
2005-08-18 12:21:16 +02:00
e8aa824eb2
Fix initialization problem on TQM5200 without SM501
...
Patch by Martin Krause, 8 Apr. 2005
2005-08-18 11:55:22 +02:00
4f562f145a
Add RTC support for STK52XX.200
...
Patch by Martin Krause, 7 Apr. 2005
2005-08-18 11:51:12 +02:00
df04a3df33
Add CHANEGLOG entry; sort Makefile entries
2005-08-18 01:22:22 +02:00
05b47540aa
Merge with testing-NAND (Rewrite of NAND code)
2005-08-17 12:57:49 +02:00
932394ac43
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
...
Patch by Ladislav Michl, 29 Jun 2005
2005-08-17 12:55:25 +02:00
98128f389c
Enable PCI on hmi1001 board
2005-08-16 15:17:53 +02:00
87b8bd5aed
Fix return values of the jffs2 commands ls/fsload/fsinfo,
...
so we can use them to, e.g., check the existence of a file with
"if ls foo; then this; else that; fi" in the hush shell
Patch by Andreas Engel, 16 August 2005
2005-08-16 09:32:45 +02:00
3d078ce6d7
Coding style cleanup
2005-08-15 16:03:56 +02:00
6bdf430660
Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
...
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
2005-08-15 15:55:00 +02:00
b79316f2a2
Add Sandburst Metrobox and Sandburst Karef board support packages.
...
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005
Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
b2f508075c
Minor code cleanup
2005-08-12 23:43:12 +02:00
50814844e4
Add forgotten new fils from latest VoiceBlue update
2005-08-12 23:36:08 +02:00
396387ab8d
Make bootretry feature work with hush shell.
...
Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
Patch by Andreas Engel, 19 Jul 2005
2005-08-12 23:34:51 +02:00
d992daf99d
Update Hymod Board Database PHP code in "tools" directory
...
Patch by Murray Jensen, 01 Jul 2005
2005-08-12 23:27:18 +02:00
f9d77ed380
Make "tr" command use POSIX compliant; export HOSTOS make variable
...
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:23:46 +02:00
b3b0fd552e
Fix Murray Jensen's mail address.
...
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:20:59 +02:00
f89920c3e4
Preserve PHY_BMCR during a soft reset.
...
Patch by Carl Riechers, 24 Jun 2005
2005-08-12 23:15:53 +02:00
e544528831
VoiceBlue update: eeprom tool can also store firmware version now.
...
eeprom.bin is runable by jumping at load address.
Patch by Ladislav Michl, 23 May 2005
2005-08-12 22:56:51 +02:00
ea99a73881
Move the AT91RM9200DK to the ARM Systems list.
...
Patch by Anders Larsen, 26 Apr 2005
2005-08-12 22:38:37 +02:00
Wolfgang Denk