Some code cleanup

This commit is contained in:
Wolfgang Denk 2006-04-16 10:51:58 +02:00
parent 807522fc9a
commit cf48eb9abd
17 changed files with 570 additions and 563 deletions

View File

@ -1,19 +1,20 @@
======================================================================
Changes since U-Boot 1.1.4:
======================================================================
* Fix dbau1x00 Board
- Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange Aug 10 2005
* Some code cleanup
* Fix dbau1x00 boards broken by dbau1550 patch
PLL:s were not set for boards other than 1550.
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
Default boot is now bootp for cards other than 1550.
Patch by Thomas Lange, 10 Aug 2005
* Fixes common/cmd_flash.c:
- fix some compiler/parser error, if using m68k tool chain
- optical fix for protect on/off all messages, if using more
then one bank
Patch by Jens Scharsig, 28 July 2005
- fix some compiler/parser error, if using m68k tool chain
- optical fix for protect on/off all messages, if using more
then one bank
Patch by Jens Scharsig, 28 Jul 2005
* Fix Quad UART mapping on MCC200 board due to new HW revision
@ -57,18 +58,18 @@ Changes since U-Boot 1.1.4:
* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
405 SDRAM: - The SDRAM parameters can now be defined in the board
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
Thanks to Andrea Marson from DAVE for this patch.
Thanks to Andrea Marson from DAVE for this patch.
440 DDR: - Added function sdram_tr1_set to auto calculate the
TR1 value for the DDR.
- Added ECC support (see p3p440).
TR1 value for the DDR.
- Added ECC support (see p3p440).
Patch by Stefan Roese, 17 Mar 2006
@ -442,7 +443,7 @@ Changes since U-Boot 1.1.4:
are removed from the default U-Boot build.
Enable DEBUG for lib_arm/board.c to enable debug messages.
New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
Patch by Stefan Roese, 24 Jan 2006
Patch by Stefan Roese, 24 Jan 2006
* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
Patch by Stefan Roese, 18 Jan 2006
@ -588,11 +589,11 @@ Changes for U-Boot 1.1.4:
* Add support for multiple PHYs.
Tested on the following boards:
cmcpu2 (at91rm9200/ether.c)
cmcpu2 (at91rm9200/ether.c)
PPChameleon (ppc4xx/4xx_enet.c)
yukon (mpc8220/fec.c)
uc100 (mpc8xx/fec.c)
tqm834x (mpc834x/tsec.c) with EEPRO100
yukon (mpc8220/fec.c)
uc100 (mpc8xx/fec.c)
tqm834x (mpc834x/tsec.c) with EEPRO100
lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
Main changes include:
common/miiphyutil.c
@ -1132,18 +1133,18 @@ Changes for U-Boot 1.1.3:
The first one is to define a single, static partition:
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
#define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
#define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
The second method uses the mtdparts command line option and dynamic
partitioning:
/* mtdparts command line support */
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
Command line of course produces bigger images, and may be inappropriate
for some targets, so by default it's off.
@ -3456,7 +3457,7 @@ Changes for U-Boot 1.0.1:
Bring ARM memory layout in sync with the documentation:
stack and malloc-heap are now located _below_ the U-Boot code
* Accelerate booting on TRAB board: read and check autoupdate image
* Accelerate booting on TRAB board: read and check autoupdate image
headers first instead of always reading the whole images.
* Fix type in MPC5XXX code (pointed out by Victor Wren)
@ -3576,7 +3577,7 @@ Changes for U-Boot 1.0.0:
* Make 5200 reset command _really_ reset the board, without running
any other code after it
* Fix errors with flash erase when range spans across banks
* Fix errors with flash erase when range spans across banks
that are mapped in reverse order
* Fix flash mapping and display on P3G4 board
@ -3820,7 +3821,7 @@ Changes for U-Boot 0.4.8:
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
@ -4307,7 +4308,7 @@ Changes for U-Boot 0.4.0:
Update for MPC8266ADS board
* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
instead CFG_MONITOR_LEN is now only used to determine _at_compile_
instead CFG_MONITOR_LEN is now only used to determine _at_compile_
_time_ (!) if the environment is embedded within the U-Boot image,
or in a separate flash sector.
@ -4357,7 +4358,7 @@ Changes for U-Boot 0.4.0:
* Patch by Thomas Schäfer, 28 Apr 2003:
Fix SPD handling for 256 ECC DIMM on Walnut
* Add support for arbitrary bitmaps for TRAB's VFD command;
* Add support for arbitrary bitmaps for TRAB's VFD command;
allow to pass boot bitmap addresses in environment variables;
allow for zero boot delay
@ -4700,7 +4701,7 @@ Changes for U-Boot 0.3.0:
* Add VFD type detection to trab board
* extend drivers/cs8900.c driver to synchronize ethaddr environment
* extend drivers/cs8900.c driver to synchronize ethaddr environment
variable with value in the EEPROM
* Patch by Stefan Roese, 10 Feb 2003:
@ -4860,7 +4861,7 @@ Changes for U-Boot 0.2.0:
* Patch by Pierre Aubert, 05 Nov 2002
Add support for slave serial Spartan 2 FPGAs
* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
drivers
* Add support for log buffer which can be passed to Linux kernel's

8
README
View File

@ -307,7 +307,7 @@ The following options need to be configured:
CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
@ -388,12 +388,12 @@ The following options need to be configured:
frequency is this value multiplied by 13 MHz.
CFG_MONAHANS_TURBO_RUN_MODE_RATIO
Defines the Monahans turbo mode to oscillator
ratio. Valid values are 1 (default if undefined) and
2. The core frequency as calculated above is multiplied
2. The core frequency as calculated above is multiplied
by this value.
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ

View File

@ -187,17 +187,17 @@ long int initdram (int board_type)
#endif /* CFG_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
* On MPC5200B we need to set the special configuration delay in the
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
*
* "The SDelay should be written to a value of 0x00000004. It is
* required to account for changes caused by normal wafer processing
* "The SDelay should be written to a value of 0x00000004. It is
* required to account for changes caused by normal wafer processing
* parameters."
*/
*/
svr = get_svr();
pvr = get_pvr();
if ((SVR_MJREV(svr) >= 2) &&
if ((SVR_MJREV(svr) >= 2) &&
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;

View File

@ -116,14 +116,14 @@ int fixed_sdram(void)
im->ddr.csbnds[2].csbnds = 0x0000000f;
im->ddr.cs_config[2] = CFG_DDR_CONFIG;
/* currently we use only one CS, so disable the other banks */
/* currently we use only one CS, so disable the other banks */
im->ddr.cs_config[0] = 0;
im->ddr.cs_config[1] = 0;
im->ddr.cs_config[3] = 0;
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
im->ddr.sdram_cfg =
SDRAM_CFG_SREN
#if defined(CONFIG_DDR_2T_TIMING)
@ -136,7 +136,7 @@ int fixed_sdram(void)
#endif
im->ddr.sdram_mode = CFG_DDR_MODE;
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
udelay(200);
/* enable DDR controller */
@ -361,12 +361,12 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
volatile u32 val;
u64 *addr, count, val64;
register u64 *i;
if (argc > 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (argc == 2) {
if (strcmp(argv[1], "status") == 0) {
ecc_print_status();
@ -379,8 +379,8 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
ddr->capture_attributes = 0;
return 0;
}
}
}
if (argc == 3) {
if (strcmp(argv[1], "sbecnt") == 0) {
val = simple_strtoul(argv[2], NULL, 10);
@ -416,8 +416,8 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} else if (strcmp(argv[2], "+mse") == 0) {
val |= ECC_ERROR_DISABLE_MSED;
} else if (strcmp(argv[2], "+all") == 0) {
val |= (ECC_ERROR_DISABLE_SBED |
ECC_ERROR_DISABLE_MBED |
val |= (ECC_ERROR_DISABLE_SBED |
ECC_ERROR_DISABLE_MBED |
ECC_ERROR_DISABLE_MSED);
} else if (strcmp(argv[2], "-sbe") == 0) {
val &= ~ECC_ERROR_DISABLE_SBED;
@ -426,8 +426,8 @@ int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} else if (strcmp(argv[2], "-mse") == 0) {
val &= ~ECC_ERROR_DISABLE_MSED;
} else if (strcmp(argv[2], "-all") == 0) {
val &= ~(ECC_ERROR_DISABLE_SBED |
ECC_ERROR_DISABLE_MBED |
val &= ~(ECC_ERROR_DISABLE_SBED |
ECC_ERROR_DISABLE_MBED |
ECC_ERROR_DISABLE_MSED);
} else {
printf("Incorrect err_disable field\n");

View File

@ -85,7 +85,7 @@ int board_init (void)
GPCR = 0x000003AB; /* I/O pad driving strength */
/* MX1_CS1U = 0x00000A00; *//* SRAM initialization */
/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
/* MX1_CS1L = 0x11110601; */
MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */

View File

@ -973,7 +973,7 @@ START:
}
static int getcxmodem(void) {
if (tstc())
if (tstc())
return (getc());
return -1;
}
@ -984,49 +984,51 @@ static ulong load_serial_ymodem (ulong offset)
int err;
int res;
connection_info_t info;
char ymodemBuf[1024];
ulong store_addr = ~0;
ulong addr = 0;
char ymodemBuf[1024];
ulong store_addr = ~0;
ulong addr = 0;
size=0;
info.mode=xyzModem_ymodem;
res=xyzModem_stream_open(&info, &err);
size = 0;
info.mode = xyzModem_ymodem;
res = xyzModem_stream_open (&info, &err);
if (!res) {
while ((res=xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0 ){
store_addr = addr + offset;
size+=res;
addr+=res;
#ifndef CFG_NO_FLASH
if (addr2info(store_addr)) {
int rc;
rc = flash_write((char *)ymodemBuf,store_addr,res);
if (rc != 0) {
flash_perror (rc);
return (~0);
}
} else
while ((res =
xyzModem_stream_read (ymodemBuf, 1024, &err)) > 0) {
store_addr = addr + offset;
size += res;
addr += res;
#ifndef CFG_NO_FLASH
if (addr2info (store_addr)) {
int rc;
rc = flash_write ((char *) ymodemBuf,
store_addr, res);
if (rc != 0) {
flash_perror (rc);
return (~0);
}
} else
#endif
{
memcpy ((char *)(store_addr), ymodemBuf, res);
}
}
}
else {
printf ("%s\n",xyzModem_error(err));
{
memcpy ((char *) (store_addr), ymodemBuf,
res);
}
}
} else {
printf ("%s\n", xyzModem_error (err));
}
xyzModem_stream_close(&err);
xyzModem_stream_terminate(false,&getcxmodem);
xyzModem_stream_close (&err);
xyzModem_stream_terminate (false, &getcxmodem);
flush_cache (offset, size);
printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
sprintf(buf, "%X", size);
setenv("filesize", buf);
printf ("## Total Size = 0x%08x = %d Bytes\n", size, size);
sprintf (buf, "%X", size);
setenv ("filesize", buf);
return offset;
}

View File

@ -1,94 +1,96 @@
//==========================================================================
//
// crc16.c
//
// 16 bit CRC with polynomial x^16+x^12+x^5+1
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas,asl
// Date: 2001-01-31
// Purpose:
// Description:
//
// This code is part of eCos (tm).
//
//####DESCRIPTIONEND####
//
//==========================================================================
/*
*==========================================================================
*
* crc16.c
*
* 16 bit CRC with polynomial x^16+x^12+x^5+1
*
*==========================================================================
*####ECOSGPLCOPYRIGHTBEGIN####
* -------------------------------------------
* This file is part of eCos, the Embedded Configurable Operating System.
* Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
* Copyright (C) 2002 Gary Thomas
*
* eCos is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 or (at your option) any later version.
*
* eCos is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with eCos; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* As a special exception, if other files instantiate templates or use macros
* or inline functions from this file, or you compile this file and link it
* with other works to produce a work based on this file, this file does not
* by itself cause the resulting work to be covered by the GNU General Public
* License. However the source code for this file must still be made available
* in accordance with section (3) of the GNU General Public License.
*
* This exception does not invalidate any other reasons why a work based on
* this file might be covered by the GNU General Public License.
*
* Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
* at http: *sources.redhat.com/ecos/ecos-license/
* -------------------------------------------
*####ECOSGPLCOPYRIGHTEND####
*==========================================================================
*#####DESCRIPTIONBEGIN####
*
* Author(s): gthomas
* Contributors: gthomas,asl
* Date: 2001-01-31
* Purpose:
* Description:
*
* This code is part of eCos (tm).
*
*####DESCRIPTIONEND####
*
*==========================================================================
*/
#include "crc.h"
// Table of CRC constants - implements x^16+x^12+x^5+1
/* Table of CRC constants - implements x^16+x^12+x^5+1 */
static const uint16_t crc16_tab[] = {
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
};
uint16_t
@ -103,4 +105,3 @@ cyg_crc16(unsigned char *buf, int len)
}
return cksum;
}

View File

@ -1,65 +1,67 @@
//==========================================================================
//
// xyzModem.c
//
// RedBoot stream handler for xyzModem protocol
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas, tsmith, Yoshinori Sato
// Date: 2000-07-14
// Purpose:
// Description:
//
// This code is part of RedBoot (tm).
//
//####DESCRIPTIONEND####
//
//==========================================================================
/*
*==========================================================================
*
* xyzModem.c
*
* RedBoot stream handler for xyzModem protocol
*
*==========================================================================
*####ECOSGPLCOPYRIGHTBEGIN####
* -------------------------------------------
* This file is part of eCos, the Embedded Configurable Operating System.
* Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
* Copyright (C) 2002 Gary Thomas
*
* eCos is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 or (at your option) any later version.
*
* eCos is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with eCos; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* As a special exception, if other files instantiate templates or use macros
* or inline functions from this file, or you compile this file and link it
* with other works to produce a work based on this file, this file does not
* by itself cause the resulting work to be covered by the GNU General Public
* License. However the source code for this file must still be made available
* in accordance with section (3) of the GNU General Public License.
*
* This exception does not invalidate any other reasons why a work based on
* this file might be covered by the GNU General Public License.
*
* Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
* at http: *sources.redhat.com/ecos/ecos-license/
* -------------------------------------------
*####ECOSGPLCOPYRIGHTEND####
*==========================================================================
*#####DESCRIPTIONBEGIN####
*
* Author(s): gthomas
* Contributors: gthomas, tsmith, Yoshinori Sato
* Date: 2000-07-14
* Purpose:
* Description:
*
* This code is part of RedBoot (tm).
*
*####DESCRIPTIONEND####
*
*==========================================================================
*/
#include <common.h>
#include <xyzModem.h>
#include <stdarg.h>
#include <crc.h>
// Assumption - run xyzModem protocol over the console port
/* Assumption - run xyzModem protocol over the console port */
// Values magic to the protocol
/* Values magic to the protocol */
#define SOH 0x01
#define STX 0x02
#define EOT 0x04
@ -67,11 +69,11 @@
#define BSP 0x08
#define NAK 0x15
#define CAN 0x18
#define EOF 0x1A // ^Z for DOS officionados
#define EOF 0x1A /* ^Z for DOS officionados */
#define USE_YMODEM_LENGTH
// Data & state local to the protocol
/* Data & state local to the protocol */
static struct {
#ifdef REDBOOT
hal_virtual_comm_table_t* __chan;
@ -80,7 +82,7 @@ static struct {
#endif
unsigned char pkt[1024], *bufp;
unsigned char blk,cblk,crc1,crc2;
unsigned char next_blk; // Expected block
unsigned char next_blk; /* Expected block */
int len, mode, total_retries;
int total_SOH, total_STX, total_CAN;
bool crc_mode, at_eof, tx_ack;
@ -89,13 +91,13 @@ static struct {
#endif
} xyz;
#define xyzModem_CHAR_TIMEOUT 2000 // 2 seconds
#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
#define xyzModem_MAX_RETRIES 20
#define xyzModem_MAX_RETRIES_WITH_CRC 10
#define xyzModem_CAN_COUNT 3 // Wait for 3 CAN before quitting
#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
#ifndef REDBOOT //SB
#ifndef REDBOOT /*SB */
typedef int cyg_int32;
int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) {
#define DELAY 20
@ -115,7 +117,7 @@ void CYGACC_COMM_IF_PUTC(char x,char y) {
putc(y);
}
// Validate a hex character
/* Validate a hex character */
__inline__ static bool
_is_hex(char c)
{
@ -124,7 +126,7 @@ _is_hex(char c)
((c >= 'a') && (c <= 'f')));
}
// Convert a single hex nibble
/* Convert a single hex nibble */
__inline__ static int
_from_hex(char c)
{
@ -140,7 +142,7 @@ _from_hex(char c)
return ret;
}
// Convert a character to lower case
/* Convert a character to lower case */
__inline__ static char
_tolower(char c)
{
@ -150,11 +152,7 @@ _tolower(char c)
return c;
}
//
// Parse (scan) a number
//
/* Parse (scan) a number */
bool
parse_num(char *s, unsigned long *val, char **es, char *delim)
{
@ -173,10 +171,10 @@ parse_num(char *s, unsigned long *val, char **es, char *delim)
first = false;
c = *s++;
if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) {
// Valid digit
/* Valid digit */
#ifdef CYGPKG_HAL_MIPS
// FIXME: tx49 compiler generates 0x2539018 for MUL which
// isn't any good.
/* FIXME: tx49 compiler generates 0x2539018 for MUL which */
/* isn't any good. */
if (16 == radix)
result = result << 4;
else
@ -187,12 +185,12 @@ parse_num(char *s, unsigned long *val, char **es, char *delim)
#endif
} else {
if (delim != (char *)0) {
// See if this character is one of the delimiters
/* See if this character is one of the delimiters */
char *dp = delim;
while (*dp && (c != *dp)) dp++;
if (*dp) break; // Found a good delimiter
if (*dp) break; /* Found a good delimiter */
}
return false; // Malformatted number
return false; /* Malformatted number */
}
}
*val = result;
@ -207,11 +205,11 @@ parse_num(char *s, unsigned long *val, char **es, char *delim)
#define USE_SPRINTF
#ifdef DEBUG
#ifndef USE_SPRINTF
//
// Note: this debug setup only works if the target platform has two serial ports
// available so that the other one (currently only port 1) can be used for debug
// messages.
//
/*
* Note: this debug setup only works if the target platform has two serial ports
* available so that the other one (currently only port 1) can be used for debug
* messages.
*/
static int
zm_dprintf(char *fmt, ...)
{
@ -235,9 +233,9 @@ zm_flush(void)
}
#else
//
// Note: this debug setup works by storing the strings in a fixed buffer
//
/*
* Note: this debug setup works by storing the strings in a fixed buffer
*/
#define FINAL
#ifdef FINAL
static char *zm_out = (char *)0x00380000;
@ -308,7 +306,7 @@ zm_dump(int line)
#define ZM_DEBUG(x)
#endif
// Wait for the line to go idle
/* Wait for the line to go idle */
static void
xyzModem_flush(void)
{
@ -330,7 +328,7 @@ xyzModem_get_hdr(void)
unsigned short cksum;
ZM_DEBUG(zm_new());
// Find the start of a header
/* Find the start of a header */
can_total = 0;
hdr_chars = 0;
@ -356,11 +354,11 @@ xyzModem_get_hdr(void)
if (++can_total == xyzModem_CAN_COUNT) {
return xyzModem_cancel;
} else {
// Wait for multiple CAN to avoid early quits
/* Wait for multiple CAN to avoid early quits */
break;
}
case EOT:
// EOT only supported if no noise
/* EOT only supported if no noise */
if (hdr_chars == 1) {
CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__));
@ -368,19 +366,19 @@ xyzModem_get_hdr(void)
return xyzModem_eof;
}
default:
// Ignore, waiting for start of header
/* Ignore, waiting for start of header */
;
}
} else {
// Data stream timed out
xyzModem_flush(); // Toss any current input
/* Data stream timed out */
xyzModem_flush(); /* Toss any current input */
ZM_DEBUG(zm_dump(__LINE__));
CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
return xyzModem_timeout;
}
}
// Header found, now read the data
/* Header found, now read the data */
res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.blk);
ZM_DEBUG(zm_save(xyz.blk));
if (!res) {
@ -420,18 +418,18 @@ xyzModem_get_hdr(void)
}
}
ZM_DEBUG(zm_dump(__LINE__));
// Validate the message
/* Validate the message */
if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk)));
ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
xyzModem_flush();
return xyzModem_frame;
}
// Verify checksum/CRC
/* Verify checksum/CRC */
if (xyz.crc_mode) {
cksum = cyg_crc16(xyz.pkt, xyz.len);
if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n",
ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n",
xyz.crc1, xyz.crc2, cksum & 0xFFFF));
return xyzModem_cksum;
}
@ -445,18 +443,18 @@ xyzModem_get_hdr(void)
return xyzModem_cksum;
}
}
// If we get here, the message passes [structural] muster
/* If we get here, the message passes [structural] muster */
return 0;
}
int
int
xyzModem_stream_open(connection_info_t *info, int *err)
{
int console_chan, stat=0;
int retries = xyzModem_MAX_RETRIES;
int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
// ZM_DEBUG(zm_out = zm_out_start);
/* ZM_DEBUG(zm_out = zm_out_start); */
#ifdef xyzModem_zmodem
if (info->mode == xyzModem_zmodem) {
*err = xyzModem_noZmodem;
@ -465,7 +463,7 @@ xyzModem_stream_open(connection_info_t *info, int *err)
#endif
#ifdef REDBOOT
// Set up the I/O channel. Note: this allows for using a different port in the future
/* Set up the I/O channel. Note: this allows for using a different port in the future */
console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
if (info->chan >= 0) {
CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
@ -477,9 +475,9 @@ xyzModem_stream_open(connection_info_t *info, int *err)
CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT);
#else
// TODO: CHECK !
/* TODO: CHECK ! */
int dummy;
xyz.__chan=&dummy;
xyz.__chan=&dummy;
#endif
xyz.len = 0;
xyz.crc_mode = true;
@ -494,11 +492,11 @@ xyzModem_stream_open(connection_info_t *info, int *err)
xyz.read_length = 0;
xyz.file_length = 0;
#endif
CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
if (xyz.mode == xyzModem_xmodem) {
// X-modem doesn't have an information header - exit here
/* X-modem doesn't have an information header - exit here */
xyz.next_blk = 1;
return 0;
}
@ -506,24 +504,24 @@ xyzModem_stream_open(connection_info_t *info, int *err)
while (retries-- > 0) {
stat = xyzModem_get_hdr();
if (stat == 0) {
// Y-modem file information header
/* Y-modem file information header */
if (xyz.blk == 0) {
#ifdef USE_YMODEM_LENGTH
// skip filename
/* skip filename */
while (*xyz.bufp++);
// get the length
/* get the length */
parse_num(xyz.bufp, &xyz.file_length, NULL, " ");
#endif
// The rest of the file name data block quietly discarded
/* The rest of the file name data block quietly discarded */
xyz.tx_ack = true;
}
xyz.next_blk = 1;
xyz.len = 0;
return 0;
} else
} else
if (stat == xyzModem_timeout) {
if (--crc_retries <= 0) xyz.crc_mode = false;
CYGACC_CALL_IF_DELAY_US(5*100000); // Extra delay for startup
CYGACC_CALL_IF_DELAY_US(5*100000); /* Extra delay for startup */
CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
xyz.total_retries++;
ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
@ -537,7 +535,7 @@ xyzModem_stream_open(connection_info_t *info, int *err)
return -1;
}
int
int
xyzModem_stream_read(char *buf, int size, int *err)
{
int stat, total, len;
@ -545,7 +543,7 @@ xyzModem_stream_read(char *buf, int size, int *err)
total = 0;
stat = xyzModem_cancel;
// Try and get 'size' bytes into the buffer
/* Try and get 'size' bytes into the buffer */
while (!xyz.at_eof && (size > 0)) {
if (xyz.len == 0) {
retries = xyzModem_MAX_RETRIES;
@ -562,8 +560,8 @@ xyzModem_stream_read(char *buf, int size, int *err)
#else
if (1) {
#endif
// Data blocks can be padded with ^Z (EOF) characters
// This code tries to detect and remove them
/* Data blocks can be padded with ^Z (EOF) characters */
/* This code tries to detect and remove them */
if ((xyz.bufp[xyz.len-1] == EOF) &&
(xyz.bufp[xyz.len-2] == EOF) &&
(xyz.bufp[xyz.len-3] == EOF)) {
@ -574,10 +572,12 @@ xyzModem_stream_read(char *buf, int size, int *err)
}
#ifdef USE_YMODEM_LENGTH
// See if accumulated length exceeds that of the file.
// If so, reduce size (i.e., cut out pad bytes)
// Only do this for Y-modem (and Z-modem should it ever
// be supported since it can fall back to Y-modem mode).
/*
* See if accumulated length exceeds that of the file.
* If so, reduce size (i.e., cut out pad bytes)
* Only do this for Y-modem (and Z-modem should it ever
* be supported since it can fall back to Y-modem mode).
*/
if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) {
xyz.read_length += xyz.len;
if (xyz.read_length > xyz.file_length) {
@ -587,9 +587,9 @@ xyzModem_stream_read(char *buf, int size, int *err)
#endif
break;
} else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) {
// Just re-ACK this so sender will get on with it
/* Just re-ACK this so sender will get on with it */
CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
continue; // Need new header
continue; /* Need new header */
} else {
stat = xyzModem_sequence;
}
@ -604,7 +604,7 @@ xyzModem_stream_read(char *buf, int size, int *err)
CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
xyz.total_retries++;
ZM_DEBUG(zm_dprintf("Reading Final Header\n"));
stat = xyzModem_get_hdr();
stat = xyzModem_get_hdr();
CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__));
}
@ -621,7 +621,7 @@ xyzModem_stream_read(char *buf, int size, int *err)
return total;
}
}
// Don't "read" data from the EOF protocol package
/* Don't "read" data from the EOF protocol package */
if (!xyz.at_eof) {
len = xyz.len;
if (size < len) len = size;
@ -639,15 +639,15 @@ xyzModem_stream_read(char *buf, int size, int *err)
void
xyzModem_stream_close(int *err)
{
diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
xyz.crc_mode ? "CRC" : "Cksum",
xyz.total_SOH, xyz.total_STX, xyz.total_CAN,
xyz.total_retries);
ZM_DEBUG(zm_flush());
}
// Need to be able to clean out the input buffer, so have to take the
// getc
/* Need to be able to clean out the input buffer, so have to take the */
/* getc */
void xyzModem_stream_terminate(bool abort, int (*getc)(void))
{
int c;
@ -657,8 +657,8 @@ void xyzModem_stream_terminate(bool abort, int (*getc)(void))
switch (xyz.mode) {
case xyzModem_xmodem:
case xyzModem_ymodem:
// The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal
// number of Backspaces is a friendly way to get the other end to abort.
/* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */
/* number of Backspaces is a friendly way to get the other end to abort. */
CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
@ -667,29 +667,33 @@ void xyzModem_stream_terminate(bool abort, int (*getc)(void))
CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
// Now consume the rest of what's waiting on the line.
/* Now consume the rest of what's waiting on the line. */
ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
xyzModem_flush();
xyz.at_eof = true;
break;
#ifdef xyzModem_zmodem
case xyzModem_zmodem:
// Might support it some day I suppose.
/* Might support it some day I suppose. */
#endif
break;
}
} else {
ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
// Consume any trailing crap left in the inbuffer from
// previous recieved blocks. Since very few files are an exact multiple
// of the transfer block size, there will almost always be some gunk here.
// If we don't eat it now, RedBoot will think the user typed it.
/*
* Consume any trailing crap left in the inbuffer from
* previous recieved blocks. Since very few files are an exact multiple
* of the transfer block size, there will almost always be some gunk here.
* If we don't eat it now, RedBoot will think the user typed it.
*/
ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
while ((c = (*getc)()) > -1) ;
ZM_DEBUG(zm_dprintf("\n"));
// Make a small delay to give terminal programs like minicom
// time to get control again after their file transfer program
// exits.
/*
* Make a small delay to give terminal programs like minicom
* time to get control again after their file transfer program
* exits.
*/
CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
}
}
@ -728,12 +732,12 @@ xyzModem_error(int err)
}
}
//
// RedBoot interface
//
#if 0 // SB
/*
* RedBoot interface
*/
#if 0 /* SB */
GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
#endif
#endif

View File

@ -58,7 +58,7 @@ int checkcpu (void)
break;
}
printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
PVR_MAJ(pvr), PVR_MIN(pvr));
#endif
printf (" at %s MHz\n", strmhz (buf, clock));

View File

@ -260,7 +260,7 @@ int dma_xfer(void *dest, u32 count, void *src)
dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT |
DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B |
DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN);
dma->dmamr0 = swab32(dmamr0);
__asm__ __volatile__ ("sync");

View File

@ -1,7 +1,7 @@
/*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
*
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
@ -426,7 +426,7 @@ static __inline__ unsigned long get_tbms (void)
/*
* Initialize all of memory for ECC, then enable errors.
*/
//#define CONFIG_DDR_ECC_INIT_VIA_DMA
/* #define CONFIG_DDR_ECC_INIT_VIA_DMA */
void ddr_enable_ecc(unsigned int dram_size)
{
uint *p;

View File

@ -18,7 +18,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@ -38,17 +38,17 @@
#ifndef CFG_SDRAM_TABLE
sdram_conf_t mb0cf[] = {
{(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
{(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
{(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
{(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
{(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
{(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
{(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
{(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
{(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
{(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
};
#else
sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
#endif
#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
#ifndef CONFIG_440
@ -65,76 +65,76 @@ static ulong ns2clks(ulong ns)
static ulong compute_sdtr1(ulong speed)
{
#ifdef CFG_SDRAM_CASL
ulong tmp;
ulong sdtr1 = 0;
ulong tmp;
ulong sdtr1 = 0;
/* CASL */
if (CFG_SDRAM_CASL < 2)
sdtr1 |= (1 << SDRAM0_TR_CASL);
else
if (CFG_SDRAM_CASL > 4)
sdtr1 |= (3 << SDRAM0_TR_CASL);
else
sdtr1 |= ((CFG_SDRAM_CASL-1) << SDRAM0_TR_CASL);
/* CASL */
if (CFG_SDRAM_CASL < 2)
sdtr1 |= (1 << SDRAM0_TR_CASL);
else
if (CFG_SDRAM_CASL > 4)
sdtr1 |= (3 << SDRAM0_TR_CASL);
else
sdtr1 |= ((CFG_SDRAM_CASL-1) << SDRAM0_TR_CASL);
/* PTA */
tmp = ns2clks(CFG_SDRAM_PTA);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
else
sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
/* PTA */
tmp = ns2clks(CFG_SDRAM_PTA);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
else
sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
/* CTP */
tmp = ns2clks(CFG_SDRAM_CTP);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
else
sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
/* CTP */
tmp = ns2clks(CFG_SDRAM_CTP);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
else
sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
/* LDF */
tmp = ns2clks(CFG_SDRAM_LDF);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
else
sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
/* LDF */
tmp = ns2clks(CFG_SDRAM_LDF);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
else
sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
/* RFTA */
tmp = ns2clks(CFG_SDRAM_RFTA);
if ((tmp >= 4) && (tmp <= 10))
sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
else
sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
/* RFTA */
tmp = ns2clks(CFG_SDRAM_RFTA);
if ((tmp >= 4) && (tmp <= 10))
sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
else
sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
/* RCD */
tmp = ns2clks(CFG_SDRAM_RCD);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
else
sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
/* RCD */
tmp = ns2clks(CFG_SDRAM_RCD);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
else
sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
return sdtr1;
return sdtr1;
#else /* CFG_SDRAM_CASL */
/*
* If no values are configured in the board config file
* use the default values, which seem to be ok for most
* boards.
*
* REMARK:
* For new board ports we strongly recommend to define the
* correct values for the used SDRAM chips in your board
* config file (see PPChameleonEVB.h)
*/
if (speed > 100000000) {
/*
* 133 MHz SDRAM
*/
return 0x01074015;
} else {
/*
* default: 100 MHz SDRAM
*/
return 0x0086400d;
}
/*
* If no values are configured in the board config file
* use the default values, which seem to be ok for most
* boards.
*
* REMARK:
* For new board ports we strongly recommend to define the
* correct values for the used SDRAM chips in your board
* config file (see PPChameleonEVB.h)
*/
if (speed > 100000000) {
/*
* 133 MHz SDRAM
*/
return 0x01074015;
} else {
/*
* default: 100 MHz SDRAM
*/
return 0x0086400d;
}
#endif /* CFG_SDRAM_CASL */
}
@ -142,24 +142,24 @@ static ulong compute_sdtr1(ulong speed)
static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
{
#ifdef CFG_SDRAM_CASL
ulong tmp;
ulong tmp;
tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
tmp /= 1000000;
tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
tmp /= 1000000;
return ((tmp & 0x00003FF8) << 16);
return ((tmp & 0x00003FF8) << 16);
#else /* CFG_SDRAM_CASL */
if (speed > 100000000) {
/*
* 133 MHz SDRAM
*/
if (speed > 100000000) {
/*
* 133 MHz SDRAM
*/
return 0x07f00000;
} else {
/*
* default: 100 MHz SDRAM
*/
} else {
/*
* default: 100 MHz SDRAM
*/
return 0x05f00000;
}
}
#endif /* CFG_SDRAM_CASL */
}
@ -172,19 +172,19 @@ void sdram_init(void)
ulong sdtr1;
int i;
/*
* Determine SDRAM speed
*/
speed = get_bus_freq(0); /* parameter not used on ppc4xx */
/*
* Determine SDRAM speed
*/
speed = get_bus_freq(0); /* parameter not used on ppc4xx */
/*
* sdtr1 (register SDRAM0_TR) must take into account timings listed
* in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
* account actual SDRAM size. So we can set up sdtr1 according to what
* is specified in board configuration file while rtr dependds on SDRAM
* size we are assuming before detection.
*/
sdtr1 = compute_sdtr1(speed);
/*
* sdtr1 (register SDRAM0_TR) must take into account timings listed
* in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
* account actual SDRAM size. So we can set up sdtr1 according to what
* is specified in board configuration file while rtr dependds on SDRAM
* size we are assuming before detection.
*/
sdtr1 = compute_sdtr1(speed);
for (i=0; i<N_MB0CF; i++) {
/*
@ -343,8 +343,8 @@ static void ecc_init(ulong start, ulong size)
* Autodetect onboard DDR SDRAM on 440 platforms
*
* NOTE: Some of the hardcoded values are hardware dependant,
* so this should be extended for other future boards
* using this routine!
* so this should be extended for other future boards
* using this routine!
*/
long int initdram(int board_type)
{
@ -360,11 +360,11 @@ long int initdram(int board_type)
/*
* Setup some default
*/
mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
@ -379,7 +379,7 @@ long int initdram(int board_type)
/*
* Enable the controller, then wait for DCEN to complete
*/
mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
udelay(10000);
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {

View File

@ -152,5 +152,3 @@ Observe that Single-Bit Error is 'on' which means that Single-Bit Error Counter
reached Single-Bit Error Threshold. Multiple Memory Errors bit is also 'on', that
is Counter reached Threshold more than one time (it wraps back after reaching
Threshold).

View File

@ -75,13 +75,13 @@
/*
* 32-bit data path mode.
*
*
* Please note that using this mode for devices with the real density of 64-bit
* effectively reduces the amount of available memory due to the effect of
* wrapping around while translating address to row/columns, for example in the
* 256MB module the upper 128MB get aliased with contents of the lower
* 128MB); normally this define should be used for devices with real 32-bit
* data path.
* data path.
*/
#undef CONFIG_DDR_32BIT

View File

@ -1,56 +1,58 @@
//==========================================================================
//
// crc.h
//
// Interface for the CRC algorithms.
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 2002 Andrew Lunn
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): Andrew Lunn
// Contributors: Andrew Lunn
// Date: 2002-08-06
// Purpose:
// Description:
//
// This code is part of eCos (tm).
//
//####DESCRIPTIONEND####
//
//==========================================================================
/*
*==========================================================================
*
* crc.h
*
* Interface for the CRC algorithms.
*
*==========================================================================
*####ECOSGPLCOPYRIGHTBEGIN####
* -------------------------------------------
* This file is part of eCos, the Embedded Configurable Operating System.
* Copyright (C) 2002 Andrew Lunn
*
* eCos is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 or (at your option) any later version.
*
* eCos is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with eCos; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* As a special exception, if other files instantiate templates or use macros
* or inline functions from this file, or you compile this file and link it
* with other works to produce a work based on this file, this file does not
* by itself cause the resulting work to be covered by the GNU General Public
* License. However the source code for this file must still be made available
* in accordance with section (3) of the GNU General Public License.
*
* This exception does not invalidate any other reasons why a work based on
* this file might be covered by the GNU General Public License.
*
* Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
* at http: *sources.redhat.com/ecos/ecos-license/
* -------------------------------------------
*####ECOSGPLCOPYRIGHTEND####
*==========================================================================
*#####DESCRIPTIONBEGIN####
*
* Author(s): Andrew Lunn
* Contributors: Andrew Lunn
* Date: 2002-08-06
* Purpose:
* Description:
*
* This code is part of eCos (tm).
*
*####DESCRIPTIONEND####
*
*==========================================================================
*/
#ifndef _SERVICES_CRC_CRC_H_
#define _SERVICES_CRC_CRC_H_
@ -65,37 +67,34 @@
# endif
#endif
// Compute a CRC, using the POSIX 1003 definition
extern uint32_t
/* Compute a CRC, using the POSIX 1003 definition */
extern uint32_t
cyg_posix_crc32(unsigned char *s, int len);
// Gary S. Brown's 32 bit CRC
/* Gary S. Brown's 32 bit CRC */
extern uint32_t
extern uint32_t
cyg_crc32(unsigned char *s, int len);
// Gary S. Brown's 32 bit CRC, but accumulate the result from a
// previous CRC calculation
/* Gary S. Brown's 32 bit CRC, but accumulate the result from a */
/* previous CRC calculation */
extern uint32_t
extern uint32_t
cyg_crc32_accumulate(uint32_t crc, unsigned char *s, int len);
// Ethernet FCS Algorithm
/* Ethernet FCS Algorithm */
extern uint32_t
extern uint32_t
cyg_ether_crc32(unsigned char *s, int len);
// Ethernet FCS algorithm, but accumulate the result from a previous
// CRC calculation.
/* Ethernet FCS algorithm, but accumulate the result from a previous */
/* CRC calculation. */
extern uint32_t
extern uint32_t
cyg_ether_crc32_accumulate(uint32_t crc, unsigned char *s, int len);
// 16 bit CRC with polynomial x^16+x^12+x^5+1
/* 16 bit CRC with polynomial x^16+x^12+x^5+1 */
extern uint16_t cyg_crc16(unsigned char *s, int len);
#endif // _SERVICES_CRC_CRC_H_
#endif /* _SERVICES_CRC_CRC_H_ */

View File

@ -1,65 +1,67 @@
//==========================================================================
//
// xyzModem.h
//
// RedBoot stream handler for xyzModem protocol
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas
// Date: 2000-07-14
// Purpose:
// Description:
//
// This code is part of RedBoot (tm).
//
//####DESCRIPTIONEND####
//
//==========================================================================
/*
*==========================================================================
*
* xyzModem.h
*
* RedBoot stream handler for xyzModem protocol
*
*==========================================================================
*####ECOSGPLCOPYRIGHTBEGIN####
* -------------------------------------------
* This file is part of eCos, the Embedded Configurable Operating System.
* Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
* Copyright (C) 2002 Gary Thomas
*
* eCos is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 or (at your option) any later version.
*
* eCos is distributed in the hope that it will be useful, but WITHOUT ANY
* WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with eCos; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* As a special exception, if other files instantiate templates or use macros
* or inline functions from this file, or you compile this file and link it
* with other works to produce a work based on this file, this file does not
* by itself cause the resulting work to be covered by the GNU General Public
* License. However the source code for this file must still be made available
* in accordance with section (3) of the GNU General Public License.
*
* This exception does not invalidate any other reasons why a work based on
* this file might be covered by the GNU General Public License.
*
* Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
* at http: *sources.redhat.com/ecos/ecos-license/
* -------------------------------------------
*####ECOSGPLCOPYRIGHTEND####
*==========================================================================
*#####DESCRIPTIONBEGIN####
*
* Author(s): gthomas
* Contributors: gthomas
* Date: 2000-07-14
* Purpose:
* Description:
*
* This code is part of RedBoot (tm).
*
*####DESCRIPTIONEND####
*
*==========================================================================
*/
#ifndef _XYZMODEM_H_
#define _XYZMODEM_H_
#define xyzModem_xmodem 1
#define xyzModem_ymodem 2
// Don't define this until the protocol support is in place
//#define xyzModem_zmodem 3
/* Don't define this until the protocol support is in place */
/*#define xyzModem_zmodem 3 */
#define xyzModem_access -1
#define xyzModem_noZmodem -2
@ -103,10 +105,10 @@ typedef unsigned int bool;
#endif
int xyzModem_stream_open(connection_info_t *info, int *err);
void xyzModem_stream_close(int *err);
void xyzModem_stream_terminate(bool method, int (*getc)(void));
int xyzModem_stream_read(char *buf, int size, int *err);
int xyzModem_stream_open(connection_info_t *info, int *err);
void xyzModem_stream_close(int *err);
void xyzModem_stream_terminate(bool method, int (*getc)(void));
int xyzModem_stream_read(char *buf, int size, int *err);
char *xyzModem_error(int err);
#endif // _XYZMODEM_H_
#endif /* _XYZMODEM_H_ */

View File

@ -116,7 +116,7 @@ void rtc_get (struct rtc_time *tm){
/*
* Since the reads are being performed one byte at a time,
* there is a chance that a carry will occur during the read.
* there is a chance that a carry will occur during the read.
* To detect this, 2 reads are performed and compared.
*/
limit = 10;