New PPC 405EP board added: CMS700
Added CONFIG_NET_MULTI for VOM405 board. Added reset_phy() for VOM405 board. Patch by Matthias Fuchs, 09 Nov 2005
This commit is contained in:
Stefan Roese
parent
3ada834e30
commit
feaedfcf84
|
|
@ -2,6 +2,11 @@
|
|||
Changes for U-Boot 1.1.4:
|
||||
======================================================================
|
||||
|
||||
* New PPC 405EP board added: CMS700
|
||||
Added CONFIG_NET_MULTI for VOM405 board.
|
||||
Added reset_phy() for VOM405 board.
|
||||
Patch by Matthias Fuchs, 09 Nov 2005
|
||||
|
||||
* Updated PCI mapping for esd CPCI2DP board.
|
||||
Add support for error LED.
|
||||
Patch by Matthias Fuchs, 07 Nov 2005
|
||||
|
|
|
|||
|
|
@ -157,6 +157,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|||
VOH405 PPC405EP
|
||||
VOM405 PPC405EP
|
||||
WUH405 PPC405EP
|
||||
CMS700 PPC405EP
|
||||
|
||||
Frank Gottschling <fgottschling@eltec.de>
|
||||
|
||||
|
|
|
|||
24
MAKEALL
24
MAKEALL
|
|
@ -62,18 +62,18 @@ LIST_8xx=" \
|
|||
|
||||
LIST_4xx=" \
|
||||
ADCIOP AP1000 AR405 ASH405 \
|
||||
bubinga CANBT CPCI2DP CPCI405 \
|
||||
CPCI4052 CPCI405AB CPCI405DT CPCI440 \
|
||||
CPCIISER4 CRAYL1 csb272 csb472 \
|
||||
DASA_SIM DP405 DU405 ebony \
|
||||
ERIC EXBITGEN G2000 HH405 \
|
||||
HUB405 JSE KAREF METROBOX \
|
||||
MIP405 MIP405T ML2 ml300 \
|
||||
ocotea OCRTC ORSG PCI405 \
|
||||
PIP405 PLU405 PMC405 PPChameleonEVB \
|
||||
sbc405 VOH405 W7OLMC W7OLMG \
|
||||
walnut WUH405 XPEDITE1K yellowstone \
|
||||
yosemite \
|
||||
bubinga CANBT CMS700 CPCI2DP \
|
||||
CPCI405 CPCI4052 CPCI405AB CPCI405DT \
|
||||
CPCI440 CPCIISER4 CRAYL1 csb272 \
|
||||
csb472 DASA_SIM DP405 DU405 \
|
||||
ebony ERIC EXBITGEN G2000 \
|
||||
HH405 HUB405 JSE KAREF \
|
||||
METROBOX MIP405 MIP405T ML2 \
|
||||
ml300 ocotea OCRTC ORSG \
|
||||
PCI405 PIP405 PLU405 PMC405 \
|
||||
PPChameleonEVB sbc405 VOH405 VOM405 \
|
||||
W7OLMC W7OLMG walnut WUH405 \
|
||||
XPEDITE1K yellowstone yosemite \
|
||||
"
|
||||
|
||||
#########################################################################
|
||||
|
|
|
|||
3
Makefile
3
Makefile
|
|
@ -894,6 +894,9 @@ VOH405_config: unconfig
|
|||
VOM405_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
|
||||
|
||||
CMS700_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
|
||||
|
||||
W7OLMC_config \
|
||||
W7OLMG_config: unconfig
|
||||
@./mkconfig $(@:_config=) ppc ppc4xx w7o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,51 @@
|
|||
#
|
||||
# (C) Copyright 2000
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
|
||||
LIB = lib$(BOARD).a
|
||||
|
||||
# Objects for Xilinx JTAG programming (CPLD)
|
||||
CPLD = ../common/xilinx_jtag/lenval.o \
|
||||
../common/xilinx_jtag/micro.o \
|
||||
../common/xilinx_jtag/ports.o
|
||||
|
||||
OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
|
||||
|
||||
$(LIB): $(OBJS) $(SOBJS)
|
||||
$(AR) crv $@ $(OBJS)
|
||||
|
||||
clean:
|
||||
rm -f $(SOBJS) $(OBJS)
|
||||
|
||||
distclean: clean
|
||||
rm -f $(LIB) core *.bak .depend
|
||||
|
||||
#########################################################################
|
||||
|
||||
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
|
||||
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
|
||||
|
||||
sinclude .depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,262 @@
|
|||
/*
|
||||
* (C) Copyright 2005
|
||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
|
||||
|
||||
extern void lxt971_no_sleep(void);
|
||||
|
||||
|
||||
/* fpga configuration data - not compressed, generated by bin2c */
|
||||
const unsigned char fpgadata[] =
|
||||
{
|
||||
#include "fpgadata.c"
|
||||
};
|
||||
int filesize = sizeof(fpgadata);
|
||||
|
||||
|
||||
int board_early_init_f (void)
|
||||
{
|
||||
/*
|
||||
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
||||
* IRQ 16 405GP internally generated; active low; level sensitive
|
||||
* IRQ 17-24 RESERVED
|
||||
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
||||
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
||||
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
||||
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
||||
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
||||
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
||||
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
||||
*/
|
||||
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
||||
mtdcr(uicer, 0x00000000); /* disable all ints */
|
||||
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
|
||||
mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
|
||||
mtdcr(uictr, 0x10000000); /* set int trigger levels */
|
||||
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
||||
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
||||
|
||||
/*
|
||||
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
||||
*/
|
||||
mtebc (epcr, 0xa8400000); /* ebc always driven */
|
||||
|
||||
/*
|
||||
* Reset CPLD via GPIO12 (CS3) pin
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET);
|
||||
udelay(1000); /* wait 1ms */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET);
|
||||
udelay(1000); /* wait 1ms */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int misc_init_f (void)
|
||||
{
|
||||
return 0; /* dummy implementation */
|
||||
}
|
||||
|
||||
|
||||
int misc_init_r (void)
|
||||
{
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/* adjust flash start and offset */
|
||||
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
|
||||
gd->bd->bi_flashoffset = 0;
|
||||
|
||||
/*
|
||||
* Setup and enable EEPROM write protection
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
|
||||
|
||||
/*
|
||||
* Set NAND-FLASH GPIO signals to default
|
||||
*/
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Check Board Identity:
|
||||
*/
|
||||
|
||||
int checkboard (void)
|
||||
{
|
||||
unsigned char str[64];
|
||||
int flashcnt;
|
||||
int delay;
|
||||
volatile unsigned char *led_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1000);
|
||||
volatile unsigned char *ver_reg = (unsigned char *)((ulong)CFG_PLD_BASE + 0x1001);
|
||||
|
||||
puts ("Board: ");
|
||||
|
||||
if (getenv_r("serial#", str, sizeof(str)) == -1) {
|
||||
puts ("### No HW ID - assuming CMS700");
|
||||
} else {
|
||||
puts(str);
|
||||
}
|
||||
|
||||
printf(" (PLD-Version=%02d)\n", *ver_reg);
|
||||
|
||||
/*
|
||||
* Flash LEDs
|
||||
*/
|
||||
for (flashcnt = 0; flashcnt < 3; flashcnt++) {
|
||||
*led_reg = 0x00; /* LEDs off */
|
||||
for (delay = 0; delay < 100; delay++)
|
||||
udelay(1000);
|
||||
*led_reg = 0x0f; /* LEDs on */
|
||||
for (delay = 0; delay < 50; delay++)
|
||||
udelay(1000);
|
||||
}
|
||||
*led_reg = 0x70;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
long int initdram (int board_type)
|
||||
{
|
||||
unsigned long val;
|
||||
|
||||
mtdcr(memcfga, mem_mb0cf);
|
||||
val = mfdcr(memcfgd);
|
||||
|
||||
#if 0
|
||||
printf("\nmb0cf=%x\n", val); /* test-only */
|
||||
printf("strap=%x\n", mfdcr(strap)); /* test-only */
|
||||
#endif
|
||||
|
||||
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
|
||||
}
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#if defined(CFG_EEPROM_WREN)
|
||||
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
||||
* <state> -1: deliver current state
|
||||
* 0: disable write
|
||||
* 1: enable write
|
||||
* Returns: -1: wrong device address
|
||||
* 0: dis-/en- able done
|
||||
* 0/1: current state if <state> was -1.
|
||||
*/
|
||||
int eeprom_write_enable (unsigned dev_addr, int state)
|
||||
{
|
||||
if (CFG_I2C_EEPROM_ADDR != dev_addr) {
|
||||
return -1;
|
||||
} else {
|
||||
switch (state) {
|
||||
case 1:
|
||||
/* Enable write access, clear bit GPIO_SINT2. */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP);
|
||||
state = 0;
|
||||
break;
|
||||
case 0:
|
||||
/* Disable write access, set bit GPIO_SINT2. */
|
||||
out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
|
||||
state = 0;
|
||||
break;
|
||||
default:
|
||||
/* Read current status back. */
|
||||
state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP));
|
||||
break;
|
||||
}
|
||||
}
|
||||
return state;
|
||||
}
|
||||
|
||||
int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
||||
{
|
||||
int query = argc == 1;
|
||||
int state = 0;
|
||||
|
||||
if (query) {
|
||||
/* Query write access state. */
|
||||
state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
|
||||
if (state < 0) {
|
||||
puts ("Query of write access state failed.\n");
|
||||
} else {
|
||||
printf ("Write access for device 0x%0x is %sabled.\n",
|
||||
CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
|
||||
state = 0;
|
||||
}
|
||||
} else {
|
||||
if ('0' == argv[1][0]) {
|
||||
/* Disable write access. */
|
||||
state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
|
||||
} else {
|
||||
/* Enable write access. */
|
||||
state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
|
||||
}
|
||||
if (state < 0) {
|
||||
puts ("Setup of write access state failed.\n");
|
||||
}
|
||||
}
|
||||
|
||||
return state;
|
||||
}
|
||||
|
||||
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
||||
"eepwren - Enable / disable / query EEPROM write access\n",
|
||||
NULL);
|
||||
#endif /* #if defined(CFG_EEPROM_WREN) */
|
||||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
|
||||
#include <linux/mtd/nand.h>
|
||||
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
|
||||
|
||||
void nand_init(void)
|
||||
{
|
||||
nand_probe(CFG_NAND_BASE);
|
||||
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
|
||||
print_size(nand_dev_desc[0].totlen, "\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
void reset_phy(void)
|
||||
{
|
||||
#ifdef CONFIG_LXT971_NO_SLEEP
|
||||
|
||||
/*
|
||||
* Disable sleep mode in LXT971
|
||||
*/
|
||||
lxt971_no_sleep();
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
#
|
||||
# (C) Copyright 2000
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
# MA 02111-1307 USA
|
||||
#
|
||||
|
||||
#
|
||||
# esd CMS405 boards
|
||||
#
|
||||
|
||||
TEXT_BASE = 0xFFFC0000
|
||||
|
|
@ -0,0 +1,101 @@
|
|||
/*
|
||||
* (C) Copyright 2001
|
||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <ppc4xx.h>
|
||||
#include <asm/processor.h>
|
||||
|
||||
/*
|
||||
* include common flash code (for esd boards)
|
||||
*/
|
||||
#include "../common/flash.c"
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Functions
|
||||
*/
|
||||
static ulong flash_get_size (vu_long * addr, flash_info_t * info);
|
||||
static void flash_get_offsets (ulong base, flash_info_t * info);
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
unsigned long flash_init (void)
|
||||
{
|
||||
unsigned long size_b0;
|
||||
int i;
|
||||
uint pbcr;
|
||||
unsigned long base_b0;
|
||||
int size_val = 0;
|
||||
|
||||
/* Init: no FLASHes known */
|
||||
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
|
||||
flash_info[i].flash_id = FLASH_UNKNOWN;
|
||||
}
|
||||
|
||||
/* Static FLASH Bank configuration here - FIXME XXX */
|
||||
|
||||
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
|
||||
|
||||
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
|
||||
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
|
||||
size_b0, size_b0<<20);
|
||||
}
|
||||
|
||||
/* Setup offsets */
|
||||
flash_get_offsets (-size_b0, &flash_info[0]);
|
||||
|
||||
/* Re-do sizing to get full correct info */
|
||||
mtdcr(ebccfga, pb0cr);
|
||||
pbcr = mfdcr(ebccfgd);
|
||||
mtdcr(ebccfga, pb0cr);
|
||||
base_b0 = -size_b0;
|
||||
switch (size_b0) {
|
||||
case 1 << 20:
|
||||
size_val = 0;
|
||||
break;
|
||||
case 2 << 20:
|
||||
size_val = 1;
|
||||
break;
|
||||
case 4 << 20:
|
||||
size_val = 2;
|
||||
break;
|
||||
case 8 << 20:
|
||||
size_val = 3;
|
||||
break;
|
||||
case 16 << 20:
|
||||
size_val = 4;
|
||||
break;
|
||||
}
|
||||
pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
|
||||
mtdcr(ebccfgd, pbcr);
|
||||
|
||||
/* Monitor protection ON by default */
|
||||
(void)flash_protect(FLAG_PROTECT_SET,
|
||||
-CFG_MONITOR_LEN,
|
||||
0xffffffff,
|
||||
&flash_info[0]);
|
||||
|
||||
flash_info[0].size = size_b0;
|
||||
|
||||
return (size_b0);
|
||||
}
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,149 @@
|
|||
/*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(powerpc)
|
||||
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
|
||||
/* Do we need any of these for elf?
|
||||
__DYNAMIC = 0; */
|
||||
SECTIONS
|
||||
{
|
||||
.resetvec 0xFFFFFFFC :
|
||||
{
|
||||
*(.resetvec)
|
||||
} = 0xffff
|
||||
|
||||
/* Read-only sections, merged into text segment: */
|
||||
. = + SIZEOF_HEADERS;
|
||||
.interp : { *(.interp) }
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.rel.text : { *(.rel.text) }
|
||||
.rela.text : { *(.rela.text) }
|
||||
.rel.data : { *(.rel.data) }
|
||||
.rela.data : { *(.rela.data) }
|
||||
.rel.rodata : { *(.rel.rodata) }
|
||||
.rela.rodata : { *(.rela.rodata) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
.init : { *(.init) }
|
||||
.plt : { *(.plt) }
|
||||
.text :
|
||||
{
|
||||
/* WARNING - the following is hand-optimized to fit within */
|
||||
/* the sector layout of our flash chips! XXX FIXME XXX */
|
||||
|
||||
cpu/ppc4xx/start.o (.text)
|
||||
cpu/ppc4xx/traps.o (.text)
|
||||
cpu/ppc4xx/interrupts.o (.text)
|
||||
cpu/ppc4xx/serial.o (.text)
|
||||
cpu/ppc4xx/cpu_init.o (.text)
|
||||
cpu/ppc4xx/speed.o (.text)
|
||||
common/dlmalloc.o (.text)
|
||||
lib_generic/crc32.o (.text)
|
||||
lib_ppc/extable.o (.text)
|
||||
lib_generic/zlib.o (.text)
|
||||
|
||||
/* . = env_offset;*/
|
||||
/* common/environment.o(.text)*/
|
||||
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
}
|
||||
_etext = .;
|
||||
PROVIDE (etext = .);
|
||||
.rodata :
|
||||
{
|
||||
*(.rodata)
|
||||
*(.rodata1)
|
||||
*(.rodata.str1.4)
|
||||
}
|
||||
.fini : { *(.fini) } =0
|
||||
.ctors : { *(.ctors) }
|
||||
.dtors : { *(.dtors) }
|
||||
|
||||
/* Read-write section, merged into data segment: */
|
||||
. = (. + 0x00FF) & 0xFFFFFF00;
|
||||
_erotext = .;
|
||||
PROVIDE (erotext = .);
|
||||
.reloc :
|
||||
{
|
||||
*(.got)
|
||||
_GOT2_TABLE_ = .;
|
||||
*(.got2)
|
||||
_FIXUP_TABLE_ = .;
|
||||
*(.fixup)
|
||||
}
|
||||
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
|
||||
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.data)
|
||||
*(.data1)
|
||||
*(.sdata)
|
||||
*(.sdata2)
|
||||
*(.dynamic)
|
||||
CONSTRUCTORS
|
||||
}
|
||||
_edata = .;
|
||||
PROVIDE (edata = .);
|
||||
|
||||
. = .;
|
||||
__u_boot_cmd_start = .;
|
||||
.u_boot_cmd : { *(.u_boot_cmd) }
|
||||
__u_boot_cmd_end = .;
|
||||
|
||||
|
||||
. = .;
|
||||
__start___ex_table = .;
|
||||
__ex_table : { *(__ex_table) }
|
||||
__stop___ex_table = .;
|
||||
|
||||
. = ALIGN(256);
|
||||
__init_begin = .;
|
||||
.text.init : { *(.text.init) }
|
||||
.data.init : { *(.data.init) }
|
||||
. = ALIGN(256);
|
||||
__init_end = .;
|
||||
|
||||
__bss_start = .;
|
||||
.bss :
|
||||
{
|
||||
*(.sbss) *(.scommon)
|
||||
*(.dynbss)
|
||||
*(.bss)
|
||||
*(COMMON)
|
||||
}
|
||||
_end = . ;
|
||||
PROVIDE (end = .);
|
||||
}
|
||||
|
|
@ -79,12 +79,6 @@ int board_early_init_f (void)
|
|||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int misc_init_f (void)
|
||||
{
|
||||
return 0; /* dummy implementation */
|
||||
}
|
||||
|
||||
|
||||
int misc_init_r (void)
|
||||
{
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
|
@ -132,11 +126,6 @@ int checkboard (void)
|
|||
}
|
||||
*led_reg = 0x40;
|
||||
|
||||
/*
|
||||
* Disable sleep mode in LXT971
|
||||
*/
|
||||
lxt971_no_sleep();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -159,10 +148,13 @@ long int initdram (int board_type)
|
|||
|
||||
/* ------------------------------------------------------------------------- */
|
||||
|
||||
int testdram (void)
|
||||
void reset_phy(void)
|
||||
{
|
||||
/* TODO: XXX XXX XXX */
|
||||
printf ("test: 16 MB - ok\n");
|
||||
#ifdef CONFIG_LXT971_NO_SLEEP
|
||||
|
||||
return (0);
|
||||
/*
|
||||
* Disable sleep mode in LXT971
|
||||
*/
|
||||
lxt971_no_sleep();
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,393 @@
|
|||
/*
|
||||
* (C) Copyright 2005
|
||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* CMS700.h - configuration options, board specific
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
|
||||
#define CONFIG_405EP 1 /* This is a PPC405 CPU */
|
||||
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
|
||||
#define CONFIG_VOM405 1 /* ...on a VOM405 board */
|
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
|
||||
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
|
||||
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
|
||||
#define CONFIG_PREBOOT /* enable preboot variable */
|
||||
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#undef CONFIG_HAS_ETH1
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
||||
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
|
||||
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
|
||||
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
|
||||
CONFIG_BOOTP_DNS | \
|
||||
CONFIG_BOOTP_DNS2 | \
|
||||
CONFIG_BOOTP_SEND_HOSTNAME )
|
||||
|
||||
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_BSP | \
|
||||
CFG_CMD_PCI | \
|
||||
CFG_CMD_IRQ | \
|
||||
CFG_CMD_ELF | \
|
||||
CFG_CMD_NAND | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_MII | \
|
||||
CFG_CMD_PING | \
|
||||
CFG_CMD_EEPROM )
|
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||||
#include <cmd_confdefs.h>
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||||
|
||||
#undef CONFIG_PRAM /* no "protected RAM" */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CFG_LONGHELP /* undef to save memory */
|
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||||
|
||||
#undef CFG_HUSH_PARSER /* use "hush" command parser */
|
||||
#ifdef CFG_HUSH_PARSER
|
||||
#define CFG_PROMPT_HUSH_PS2 "> "
|
||||
#endif
|
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CFG_MAXARGS 16 /* max number of command args */
|
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
|
||||
|
||||
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
|
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
|
||||
#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
|
||||
#define CFG_BASE_BAUD 691200
|
||||
#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
|
||||
|
||||
/* The following table includes the supported baudrates */
|
||||
#define CFG_BAUDRATE_TABLE \
|
||||
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
|
||||
57600, 115200, 230400, 460800, 921600 }
|
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
|
||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
||||
|
||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* RTC stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_RTC_DS1337
|
||||
#define CFG_I2C_RTC_ADDR 0x68
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* NAND-FLASH stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
||||
#define SECTORSIZE 512
|
||||
|
||||
#define ADDR_COLUMN 1
|
||||
#define ADDR_PAGE 2
|
||||
#define ADDR_COLUMN_PAGE 3
|
||||
|
||||
#define NAND_ChipID_UNKNOWN 0x00
|
||||
#define NAND_MAX_FLOORS 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
|
||||
#define CFG_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */
|
||||
#define CFG_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */
|
||||
#define CFG_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */
|
||||
#define CFG_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
|
||||
|
||||
#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);} while(0)
|
||||
#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CE);} while(0)
|
||||
#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_ALE);} while(0)
|
||||
#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND_CLE);} while(0)
|
||||
#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CLE);} while(0)
|
||||
#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CFG_NAND_RDY))
|
||||
|
||||
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
|
||||
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
|
||||
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
|
||||
|
||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
*/
|
||||
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
||||
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
||||
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
||||
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_HOST PCI_HOST_HOST /* select pci host function */
|
||||
#undef CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
/* resource configuration */
|
||||
|
||||
#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
|
||||
|
||||
#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
|
||||
#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
|
||||
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
|
||||
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
|
||||
#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
|
||||
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
||||
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
|
||||
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
|
||||
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
* the maximum mapped by the Linux kernel during initialization.
|
||||
*/
|
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization
|
||||
*/
|
||||
#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
|
||||
|
||||
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
||||
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
|
||||
#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
|
||||
#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
|
||||
/*
|
||||
* The following defines are added for buggy IOP480 byte interface.
|
||||
* All other boards should use the standard values (CPCI405 etc.)
|
||||
*/
|
||||
#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
|
||||
#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
|
||||
#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
|
||||
|
||||
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||||
|
||||
#if 0 /* test-only */
|
||||
#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */
|
||||
#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration
|
||||
* (Set up by the startup code)
|
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||||
*/
|
||||
#define CFG_SDRAM_BASE 0x00000000
|
||||
#define CFG_FLASH_BASE 0xFFFC0000
|
||||
#define CFG_MONITOR_BASE TEXT_BASE
|
||||
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
|
||||
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
|
||||
|
||||
#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
|
||||
# define CFG_RAMBOOT 1
|
||||
#else
|
||||
# undef CFG_RAMBOOT
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment Variable setup
|
||||
*/
|
||||
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
||||
#define CFG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */
|
||||
#define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/
|
||||
/* total size of a CAT24WC16 is 2048 bytes */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C EEPROM (CAT24WC16) for environment
|
||||
*/
|
||||
#define CONFIG_HARD_I2C /* I2c with hardware support */
|
||||
#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
|
||||
#define CFG_I2C_SLAVE 0x7F
|
||||
|
||||
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
|
||||
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
||||
/* mask of address bits that overflow into the "EEPROM chip address" */
|
||||
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
|
||||
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
|
||||
/* 16 byte page write mode using*/
|
||||
/* last 4 bits of the address */
|
||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
||||
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||||
|
||||
#define CFG_EEPROM_WREN 1
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration
|
||||
*/
|
||||
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
|
||||
/* have only 8kB, 16kB is save here */
|
||||
#define CFG_CACHELINE_SIZE 32 /* ... */
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||||
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* External Bus Controller (EBC) Setup
|
||||
*/
|
||||
#define CFG_PLD_BASE 0xf0000000
|
||||
#define CFG_NAND_BASE 0xF4000000 /* NAND FLASH Base Address */
|
||||
|
||||
/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
|
||||
#define CFG_EBC_PB0AP 0x92015480
|
||||
#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
|
||||
|
||||
/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */
|
||||
#define CFG_EBC_PB1AP 0x92015480
|
||||
#define CFG_EBC_PB1CR 0xF4018000 /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */
|
||||
|
||||
/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */
|
||||
#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
||||
#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FPGA stuff
|
||||
*/
|
||||
#define CFG_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */
|
||||
#define CFG_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */
|
||||
|
||||
/* FPGA program pin configuration */
|
||||
#define CFG_FPGA_PRG 0x04000000 /* JTAG TMS pin (ppc output) */
|
||||
#define CFG_FPGA_CLK 0x02000000 /* JTAG TCK pin (ppc output) */
|
||||
#define CFG_FPGA_DATA 0x01000000 /* JTAG TDO->TDI data pin (ppc output) */
|
||||
#define CFG_FPGA_INIT 0x00010000 /* unused (ppc input) */
|
||||
#define CFG_FPGA_DONE 0x00008000 /* JTAG TDI->TDO pin (ppc input) */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in data cache)
|
||||
*/
|
||||
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
|
||||
#define CFG_TEMP_STACK_OCM 1
|
||||
|
||||
/* On Chip Memory location */
|
||||
#define CFG_OCM_DATA_ADDR 0xF8000000
|
||||
#define CFG_OCM_DATA_SIZE 0x1000
|
||||
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
|
||||
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
|
||||
|
||||
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for GPIO setup (PPC405EP specific)
|
||||
*
|
||||
* GPIO0[0] - External Bus Controller BLAST output
|
||||
* GPIO0[1-9] - Instruction trace outputs -> GPIO
|
||||
* GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
|
||||
* GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO
|
||||
* GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
|
||||
* GPIO0[24-27] - UART0 control signal inputs/outputs
|
||||
* GPIO0[28-29] - UART1 data signal input/output
|
||||
* GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
|
||||
*/
|
||||
/* GPIO Input: OSR=00, ISR=00, TSR=00, TCR=0 */
|
||||
/* GPIO Output: OSR=00, ISR=00, TSR=00, TCR=1 */
|
||||
/* Alt. Funtion Input: OSR=00, ISR=01, TSR=00, TCR=0 */
|
||||
/* Alt. Funtion Output: OSR=01, ISR=00, TSR=00, TCR=1 */
|
||||
#define CFG_GPIO0_OSRH 0x40000500 /* 0 ... 15 */
|
||||
#define CFG_GPIO0_OSRL 0x00000110 /* 16 ... 31 */
|
||||
#define CFG_GPIO0_ISR1H 0x00000000 /* 0 ... 15 */
|
||||
#define CFG_GPIO0_ISR1L 0x14000045 /* 16 ... 31 */
|
||||
#define CFG_GPIO0_TSRH 0x00000000 /* 0 ... 15 */
|
||||
#define CFG_GPIO0_TSRL 0x00000000 /* 16 ... 31 */
|
||||
#define CFG_GPIO0_TCR 0xF7FE0014 /* 0 ... 31 */
|
||||
|
||||
#define CFG_EEPROM_WP (0x80000000 >> 8) /* GPIO8 */
|
||||
#define CFG_PLD_RESET (0x80000000 >> 12) /* GPIO12 */
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
/*
|
||||
* Default speed selection (cpu_plb_opb_ebc) in mhz.
|
||||
* This value will be set if iic boot eprom is disabled.
|
||||
*/
|
||||
#if 0
|
||||
#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
|
||||
#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
|
||||
#endif
|
||||
#if 0
|
||||
#define PLLMR0_DEFAULT PLLMR0_200_100_50_33
|
||||
#define PLLMR1_DEFAULT PLLMR1_200_100_50_33
|
||||
#endif
|
||||
#if 1
|
||||
#define PLLMR0_DEFAULT PLLMR0_133_66_66_33
|
||||
#define PLLMR1_DEFAULT PLLMR1_133_66_66_33
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
@ -52,9 +52,13 @@
|
|||
|
||||
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#undef CONFIG_HAS_ETH1
|
||||
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
||||
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
|
||||
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
|
||||
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
|
||||
CONFIG_BOOTP_DNS | \
|
||||
|
|
|
|||
Loading…
Reference in New Issue