Enable PCI on hmi1001 board

CHANGELOG

@@ -2,6 +2,8 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Enable PCI on hmi1001 board
+
 * Fix return values of the jffs2 commands ls/fsload/fsinfo,
   so we can use them to, e.g., check the existence of a file with
   "if ls foo; then this; else that; fi" in the hush shell

board/hmi1001/hmi1001.c

@@ -170,3 +170,13 @@ int board_early_init_r (void)
 	*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
 	return 0;
 }
+#ifdef	CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+	pci_mpc5xxx_init(&hose);
+}
+#endif

include/configs/hmi1001.h

@@ -65,6 +65,7 @@
 				CFG_CMD_I2C	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
 				CFG_CMD_SNTP)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -307,4 +308,21 @@
 
 #define CONFIG_ATAPI            1
 
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define CONFIG_PCI		1
+#define CONFIG_PCI_PNP		1
+#define CONFIG_PCI_SCAN_SHOW	1
+
+#define CONFIG_PCI_MEM_BUS	0x40000000
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x10000000
+
+#define CONFIG_PCI_IO_BUS	0x50000000
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x01000000
+
 #endif /* __CONFIG_H */