| .. |
|
A3000.h
|
* Patches by Yuli Barcohen, 13 Jul 2003:
|
2003-07-14 22:13:32 +00:00 |
|
ADCIOP.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ADNPESC1.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
ADNPESC1_base_32.h
|
* Patch by Stephan Linz, 09 Mar 2004
|
2004-03-14 15:20:55 +00:00 |
|
ADS860.h
|
Patch by Yuli Barcohen, 19 Apr 2004:
|
2004-06-06 21:35:06 +00:00 |
|
AMX860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
AP1000.h
|
Support passing of OF flat trees to the kernel.
|
2005-10-13 01:45:54 +02:00 |
|
APC405.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
AR405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ASH405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
Adder.h
|
Add support for Adder boards with 16MB SDRAM;
|
2006-03-12 01:43:03 +01:00 |
|
Alaska8220.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
AmigaOneG3SE.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
B2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
BAB7xx.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
BC3450.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
BMW.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CANBT.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
CATcenter.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
CCM.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
CMS700.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CPC45.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
CPCI2DP.h
|
PMC405 and CPCI405: Moved configuration of pci resources into config file.
|
2006-01-18 20:03:15 +01:00 |
|
CPCI405.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
CPCI405AB.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
CPCI405DT.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
CPCI440.h
|
ppc4xx: Clean up 440 exceptions handling
|
2007-06-15 11:19:28 +02:00 |
|
CPCI750.h
|
README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
|
2006-10-28 02:28:02 +02:00 |
|
CPCI4052.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
CPCIISER4.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
CPU86.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
CPU87.h
|
Code cleanup
|
2006-08-27 18:10:01 +02:00 |
|
CRAYL1.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
CU824.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
DASA_SIM.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
DB64360.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
DB64460.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
DK1C20.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
DK1C20_safe_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1C20_standard_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1S10.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
DK1S10_mtx_ldk_20.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1S10_safe_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1S10_standard_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DP405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
DU405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
EB+MCF-EV123.h
|
Minor code cleanup.
|
2006-06-10 22:00:40 +02:00 |
|
ELPPC.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
ELPT860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
EP1C20.h
|
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
|
2006-06-08 13:37:39 -04:00 |
|
EP1S10.h
|
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
|
2006-06-08 13:37:39 -04:00 |
|
EP1S40.h
|
Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
|
2006-06-08 13:37:39 -04:00 |
|
EP88x.h
|
Add support for EmbeddedPlanet EP88x boards
|
2006-03-12 23:17:31 +01:00 |
|
ERIC.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ESTEEM192E.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
ETX094.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
EVB64260.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
EXBITGEN.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
FADS823.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
FADS850SAR.h
|
* Patch by Robert Schwebel, 10 Jun 2004:
|
2004-06-10 21:34:36 +00:00 |
|
FADS860T.h
|
Patch by Yuli Barcohen, 19 Apr 2004:
|
2004-06-06 21:35:06 +00:00 |
|
FLAGADM.h
|
Initial revision
|
2002-08-19 11:57:05 +00:00 |
|
FPS850L.h
|
* Fix flash parameters passed to Linux for PPChameleon board
|
2004-06-17 18:50:45 +00:00 |
|
FPS860L.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
G2000.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
GEN860T.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
GENIETV.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
GTH.h
|
Initial revision
|
2002-08-19 11:57:05 +00:00 |
|
HH405.h
|
Merge the new NAND code (testing-NAND brach); see doc/README.nand
|
2006-03-06 11:25:22 +01:00 |
|
HIDDEN_DRAGON.h
|
* Patch by Yusdi Santoso, 22 Oct 2004:
|
2005-04-03 15:51:42 +00:00 |
|
HMI10.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
HUB405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
IAD210.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
ICU862.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
IDS8247.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
IP860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
IPHASE4539.h
|
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
|
2005-07-23 10:37:35 -05:00 |
|
ISPAN.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
IVML24.h
|
* Patch by Martin Krause, 17 Jul 2003:
|
2003-07-17 23:16:40 +00:00 |
|
IVMS8.h
|
* Patch by Martin Krause, 17 Jul 2003:
|
2003-07-17 23:16:40 +00:00 |
|
IceCube.h
|
Merge with /home/tur/git/u-boot#motionpro
|
2007-05-28 01:11:11 +02:00 |
|
JSE.h
|
Fix for compile of JSE target
|
2007-05-15 22:15:53 +02:00 |
|
KAREF.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
KUP4K.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
KUP4X.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
LANTEC.h
|
* Fix PHY address argument passing with mii info command
|
2005-09-24 21:54:50 +02:00 |
|
M5271EVB.h
|
Enable autoboot for M5271EVB board.
|
2006-05-17 12:16:26 +02:00 |
|
M5272C3.h
|
* Some code cleanup
|
2004-02-12 00:47:09 +00:00 |
|
M5282EVB.h
|
* Some code cleanup
|
2004-02-12 00:47:09 +00:00 |
|
MBX.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
MBX860T.h
|
Initial revision
|
2002-08-19 11:57:05 +00:00 |
|
METROBOX.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
MHPC.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
MIP405.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
ML2.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
MOUSSE.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
MPC86xADS.h
|
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
|
2006-03-12 01:55:43 +01:00 |
|
MPC832XEMDS.h
|
mpc83xx: update [local-]mac-address properties on UEC based devices
|
2007-03-02 11:05:54 -06:00 |
|
MPC885ADS.h
|
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
|
2006-03-12 01:55:43 +01:00 |
|
MPC8260ADS.h
|
Add board support for armadillo HT1070
|
2005-09-26 01:06:33 +02:00 |
|
MPC8266ADS.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
MPC8313ERDB.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8349EMDS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8349ITX.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8360EMDS.h
|
Add a flattened device tree (fdt) command (2 of 2)
|
2007-03-31 12:23:51 -04:00 |
|
MPC8540ADS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8540EVAL.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8541CDS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8544DS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8548CDS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8555CDS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8560ADS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8568MDS.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
MPC8641HPCN.h
|
Merge with /home/wd/git/u-boot/custodian/u-boot-testing
|
2007-07-03 15:07:56 +02:00 |
|
MUSENKI.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
MVBLUE.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
MVS1.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
NC650.h
|
Fix breakage of NC650 board with respect to nand support.
|
2007-04-20 12:01:47 +02:00 |
|
NETPHONE.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
NETTA.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
NETTA2.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
NETVIA.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
NSCU.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
NX823.h
|
Initial revision
|
2002-08-20 16:13:03 +00:00 |
|
OCRTC.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ORSG.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
OXC.h
|
* Patch by Mark Jonas: Remove config.tmp files only when
|
2004-04-08 22:31:29 +00:00 |
|
P3G4.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
PATI.h
|
* Patch by Ronen Shitrit, 10 Dec 2003:
|
2004-01-03 00:43:19 +00:00 |
|
PCI405.h
|
[PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
|
2007-03-14 22:09:31 +01:00 |
|
PCI5441.h
|
Patches by Scott McNutt, 24 Aug 2004:
|
2004-10-10 21:27:30 +00:00 |
|
PCIPPC2.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PCIPPC6.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PIP405.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
PK1C20.h
|
Update PK1C20 board
|
2006-06-08 12:03:21 -04:00 |
|
PLU405.h
|
fixed ethernet phy configuration for plu405 board
|
2007-03-08 22:14:47 +01:00 |
|
PM520.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
PM826.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PM828.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PM854.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
PM856.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
PMC405.h
|
PMC405 and CPCI405: Moved configuration of pci resources into config file.
|
2006-01-18 20:03:15 +01:00 |
|
PN62.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
PPChameleonEVB.h
|
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
|
2006-03-31 14:32:07 +02:00 |
|
QS823.h
|
Patch by Wolter Kamphuis, 05 Dec 2003:
|
2003-12-07 22:27:15 +00:00 |
|
QS850.h
|
Patch by Wolter Kamphuis, 05 Dec 2003:
|
2003-12-07 22:27:15 +00:00 |
|
QS860T.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
R360MPI.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
RBC823.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
RPXClassic.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
RPXlite.h
|
RPXlite configuration fixes
|
2006-03-12 01:48:55 +01:00 |
|
RPXlite_DW.h
|
Add support for Lite5200B board.
|
2006-03-17 11:42:53 +01:00 |
|
RPXsuper.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
RRvision.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
Rattler.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
SBC8540.h
|
Converted all 85xx boards to use a common FSL I2C driver.
|
2006-10-20 15:50:15 -05:00 |
|
SCM.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
SL8245.h
|
* Add support for USB Mass Storage Devices (BBB)
|
2003-09-10 18:20:28 +00:00 |
|
SM850.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
SMN42.h
|
Coding Style cleanup; generate new CHANGELOG file.
|
2007-06-06 16:26:56 +02:00 |
|
SPD823TS.h
|
* Patch by Martin Krause, 17 Jul 2003:
|
2003-07-17 23:16:40 +00:00 |
|
SX1.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
SXNI855T.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
Sandpoint8240.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
Sandpoint8245.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
TASREG.h
|
Code cleanup.
|
2004-12-16 21:44:03 +00:00 |
|
TB5200.h
|
Coding Style cleanup; generate new CHANGELOG file.
|
2007-06-06 16:26:56 +02:00 |
|
TOP860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TOP5200.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
TQM85xx.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
TQM823L.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM823M.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM834x.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
TQM850L.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM850M.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM855L.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM855M.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM860L.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM860M.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM862L.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM862M.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM866M.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM885D.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM5200.h
|
Coding stylke cleanup; rebuild CHANGELOG
|
2007-06-22 23:59:00 +02:00 |
|
TQM8260.h
|
Enable commandline editing and hush shell on all TQM boards.
|
2006-10-28 02:29:14 +02:00 |
|
TQM8272.h
|
Minor code cleanup.
|
2006-12-24 01:42:57 +01:00 |
|
Total5200.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
VCMA9.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
VOH405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
VOM405.h
|
New PPC 405EP board added: CMS700
|
2005-11-15 10:35:59 +01:00 |
|
VoVPN-GW.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
W7OLMC.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
W7OLMG.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
WUH405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
XPEDITE1K.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
Yukon8220.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
ZPC1900.h
|
Memory configuration changes for ZPC.1900 board
|
2006-03-12 01:45:44 +01:00 |
|
ZUMA.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
acadia.h
|
[ppc4xx] Fix problem with NAND booting on AMCC Acadia
|
2007-06-19 16:42:31 +02:00 |
|
adsvix.h
|
Patch by Steven Scholz, 06 Apr 2005:
|
2005-04-06 13:52:31 +00:00 |
|
aev.h
|
Coding Style cleanup; generate new CHANGELOG file.
|
2007-06-06 16:26:56 +02:00 |
|
alpr.h
|
Merge with git://www.denx.de/git/u-boot.git
|
2007-06-25 20:20:30 +02:00 |
|
armadillo.h
|
Add board support for armadillo HT1070
|
2005-09-26 01:06:33 +02:00 |
|
assabet.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
at91rm9200dk.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
atc.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
atstk1002.h
|
Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup.
|
2007-04-18 16:53:52 +02:00 |
|
bamboo.h
|
ppc4xx: Update AMCC Bamboo 440EP support
|
2007-07-31 10:24:56 +02:00 |
|
barco.h
|
Support passing of OF flat trees to the kernel.
|
2005-10-13 01:45:54 +02:00 |
|
bf533-ezkit.h
|
[Blackfin][PATCH] code cleanup
|
2007-03-12 00:25:14 +08:00 |
|
bf533-stamp.h
|
[Blackfin][PATCH] minor cleanup
|
2007-03-12 12:11:55 +08:00 |
|
bf537-stamp.h
|
[Blackfin][PATCH] Add BF537 stamp board support
|
2007-03-19 01:24:52 +08:00 |
|
bf561-ezkit.h
|
[Blackfin][PATCH] Add BF561 EZKIT board support
|
2007-03-20 18:16:24 +08:00 |
|
bubinga.h
|
[PATCH] Update some AMCC 4xx board config files (set initrd_high)
|
2007-02-07 16:51:08 +01:00 |
|
c2mon.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
canmb.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
cerf250.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
cm1_qp1.h
|
CM1.QP1: Support for the Schindler CM1.QP1 board.
|
2007-07-11 20:11:07 +02:00 |
|
cm41xx.h
|
* Extend burst mode RAM test program to take a loop count
|
2005-05-23 10:49:50 +00:00 |
|
cm4008.h
|
* Extend burst mode RAM test program to take a loop count
|
2005-05-23 10:49:50 +00:00 |
|
cmc_pu2.h
|
Update configuration for CMC-PU2 board
|
2006-06-16 16:43:33 +02:00 |
|
cmi_mpc5xx.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
cobra5272.h
|
Patch by Florian Schlote, 08 Sep 2004:
|
2005-01-09 18:21:42 +00:00 |
|
cogent_common.h
|
* Patch by Shlomo Kut, 29 Mar 2004:
|
2004-09-29 11:02:56 +00:00 |
|
cogent_mpc8xx.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
cogent_mpc8260.h
|
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
|
2005-07-23 10:37:35 -05:00 |
|
cpci5200.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
cradle.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
csb226.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
csb272.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
csb472.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
csb637.h
|
Fix the machine-id of the Cogent csb637 board
|
2005-10-06 01:26:16 +02:00 |
|
dbau1x00.h
|
* Fix dbau1x00 Board
|
2006-04-11 14:53:29 +02:00 |
|
debris.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
delta.h
|
Remove BOARDLIBS usage completely
|
2007-04-23 12:00:22 +02:00 |
|
dnp1110.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
eXalion.h
|
* Patch by Pierre Aubert, 26 Feb 2004
|
2004-02-27 08:20:54 +00:00 |
|
ebony.h
|
Merge with git://www.denx.de/git/u-boot.git
|
2007-06-25 20:20:30 +02:00 |
|
ep82xxm.h
|
README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
|
2006-10-28 02:28:02 +02:00 |
|
ep7312.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
ep8248.h
|
Add support for ep8248 board
|
2005-08-06 01:42:58 +02:00 |
|
ep8260.h
|
Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
|
2005-09-25 16:56:15 +02:00 |
|
evb4510.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
gcplus.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
gth2.h
|
Add support for TB5200 board
|
2006-07-19 13:50:38 +02:00 |
|
gw8260.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
h2_p2_dbg_board.h
|
* Code cleanup (ARM mostly)
|
2004-07-01 16:30:44 +00:00 |
|
hcu4.h
|
Coding style cleanup
|
2007-08-10 10:42:25 +02:00 |
|
hcu5.h
|
Coding style cleanup
|
2007-08-10 10:42:25 +02:00 |
|
hermes.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
hmi1001.h
|
Merge with /home/tur/git/u-boot#motionpro
|
2007-05-28 01:11:11 +02:00 |
|
hymod.h
|
* Fix PHY address argument passing with mii info command
|
2005-09-24 21:54:50 +02:00 |
|
idmr.h
|
[iDMR] Add MTD and JFFS2 support, also add default partition definition.
|
2007-01-23 17:22:06 +01:00 |
|
impa7.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
incaip.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
inka4x0.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
innokom.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
integratorap.h
|
Update ARM Integrator boards:
|
2005-10-04 23:10:28 +02:00 |
|
integratorcp.h
|
Update ARM Integrator boards:
|
2005-10-04 23:10:28 +02:00 |
|
ixdp425.h
|
* Update Intel IXP4xx support
|
2006-05-30 15:56:48 +02:00 |
|
ixdpg425.h
|
* Update Intel IXP4xx support
|
2006-05-30 15:56:48 +02:00 |
|
jupiter.h
|
Make SC3 board build with 'make O='; use 'addcons' consistently
|
2007-03-13 16:05:55 +01:00 |
|
katmai.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
kb9202.h
|
Complete support for the KwikByte KB920x boards
|
2005-10-06 01:22:22 +02:00 |
|
kvme080.h
|
Add support for KVME080 board
|
2006-07-21 11:29:20 +02:00 |
|
lart.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
logodl.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
lpc2292sodimm.h
|
Coding Style cleanup; generate new CHANGELOG file.
|
2007-06-06 16:26:56 +02:00 |
|
lpd7a400-10.h
|
* Patch by Paul Ruhland, 10 Jun 2004:
|
2004-06-10 21:55:33 +00:00 |
|
lpd7a400.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
lpd7a404-10.h
|
* Patch by Paul Ruhland, 10 Jun 2004:
|
2004-06-10 21:55:33 +00:00 |
|
lpd7a404.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
luan.h
|
ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
|
2007-07-16 10:01:38 +02:00 |
|
lubbock.h
|
Fixes to the Lubbock (PXA 25x) support:
|
2005-09-26 00:29:53 +02:00 |
|
lwmon.h
|
* Patch by Detlev Zundel, 30 Jun 2005:
|
2005-07-04 00:03:16 +00:00 |
|
lwmon5.h
|
ppc4xx: Update lwmon5 POST configuration
|
2007-08-10 08:42:55 +02:00 |
|
mcc200.h
|
Merge with /home/tur/git/u-boot#motionpro
|
2007-05-28 01:11:11 +02:00 |
|
mecp5200.h
|
Minor code cleanup.
|
2007-02-27 14:26:04 +01:00 |
|
ml300.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ml401.h
|
Coding Style Cleanup, new CHANGELOG
|
2007-05-16 00:13:33 +02:00 |
|
modnet50.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
motionpro.h
|
Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
|
2007-05-27 17:26:46 +02:00 |
|
mp2usb.h
|
Add support for AT91RM9200 OHCI Controller.
|
2005-09-26 01:26:56 +02:00 |
|
mpc7448hpc2.h
|
Some code cleanup.
|
2007-03-04 01:36:05 +01:00 |
|
mx1ads.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
mx1fs2.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
netstar.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
ns9750dev.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
o2dnt.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
ocotea.h
|
Merge with git://www.denx.de/git/u-boot.git
|
2007-06-25 20:20:30 +02:00 |
|
omap730.h
|
* Patch by Rishi Bhattacharya, 08 May 2004:
|
2004-06-08 00:22:43 +00:00 |
|
omap730p2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap1510.h
|
Add support for Siemens SX1 mobile phone;
|
2004-03-12 00:14:09 +00:00 |
|
omap1510inn.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap1610h2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap1610inn.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap2420h4.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
omap5912osk.h
|
Update omap5912osk board support
|
2006-05-10 10:55:16 +02:00 |
|
p3mx.h
|
[PATCH] Update Prodrive P3Mx support
|
2007-01-18 11:54:52 +01:00 |
|
p3p440.h
|
Merge with git://www.denx.de/git/u-boot.git
|
2007-06-25 20:20:30 +02:00 |
|
pb1x00.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pcs440ep.h
|
[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
|
2007-07-11 18:39:11 +02:00 |
|
pcu_e.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pdnb3.h
|
[PATCH] Update Prodrive SCPU (PDNB3 variant) board
|
2007-01-30 15:01:49 +01:00 |
|
pf5200.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
pleb2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
ppmc7xx.h
|
Add support for TB5200 board
|
2006-07-19 13:50:38 +02:00 |
|
ppmc8260.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
purple.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pxa255_idp.h
|
Add Vibren (was Accelent) PXA255 IDP Support
|
2005-09-25 15:59:01 +02:00 |
|
quantum.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
r5200.h
|
Minor cleanup.
|
2006-05-10 17:43:20 +02:00 |
|
rmu.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
rsdproto.h
|
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
|
2005-07-23 10:37:35 -05:00 |
|
sacsng.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
sbc405.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
sbc2410x.h
|
Code cleanup
|
2006-07-21 11:56:05 +02:00 |
|
sbc8240.h
|
* Rename SBC8560 into sbc8560 for consistency
|
2004-07-10 22:35:59 +00:00 |
|
sbc8260.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
sbc8349.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
sbc8560.h
|
Converted all 85xx boards to use a common FSL I2C driver.
|
2006-10-20 15:50:15 -05:00 |
|
sc3.h
|
Fix config problems on SC3 board; make ide_reset_timeout work.
|
2007-06-08 10:24:58 +02:00 |
|
sc520_cdp.h
|
Add driver for S-ATA-controller on Intel processors with South
|
2007-05-15 23:25:37 +02:00 |
|
sc520_spunk.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
sc520_spunk_rel.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
scb9328.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
sequoia.h
|
Merged POST framework with the current TOT.
|
2007-07-05 08:17:37 +02:00 |
|
shannon.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
smdk2400.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
smdk2410.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
smmaco4.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
sorcery.h
|
Fix build problems on sorcery board.
|
2006-09-04 02:01:27 +02:00 |
|
spc1920.h
|
SPC1920: cleanup memory contoller setup
|
2007-01-09 16:02:48 +01:00 |
|
spieval.h
|
Coding Style cleanup; generate new CHANGELOG file.
|
2007-06-06 16:26:56 +02:00 |
|
stxgp3.h
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
2007-05-17 00:07:21 +02:00 |
|
stxssa.h
|
Code cleanup and default config update for STC GP3 SSA board.
|
2007-07-06 02:50:19 +02:00 |
|
stxxtc.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
suzaku.h
|
[CLEAN] Remove inefficient Suzaku code
|
2007-03-30 22:42:45 +02:00 |
|
svm_sc8xx.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
taihu.h
|
ppc4xx: Add support for AMCC 405EP Taihu board
|
2007-07-26 17:49:11 +02:00 |
|
taishan.h
|
Merge with git://www.denx.de/git/u-boot.git
|
2007-06-25 20:20:30 +02:00 |
|
tb0229.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
trab.h
|
Fix some bugs in TRAB board flash driver.
|
2006-07-19 14:13:02 +02:00 |
|
uc100.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
uc101.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
utx8245.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
v37.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
v38b.h
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
2007-05-27 16:53:43 +02:00 |
|
versatile.h
|
* Patch by Philippe Robin, 28 Sept 2004:
|
2004-10-11 22:51:13 +00:00 |
|
virtlab2.h
|
Add support for VirtLab2 board
|
2006-05-12 16:15:46 +02:00 |
|
voiceblue.h
|
VoiceBlue update: use new MTD flash partitioning methods, use more
|
2006-05-03 08:34:03 +02:00 |
|
walnut.h
|
[PATCH] Update some AMCC 4xx board config files (set initrd_high)
|
2007-02-07 16:51:08 +01:00 |
|
wepep250.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
xaeniax.h
|
Adjust configuration of XENIAX board
|
2005-08-04 19:45:01 +02:00 |
|
xm250.h
|
Enable initrd ATAG for xm250 board.
|
2006-07-21 11:36:48 +02:00 |
|
xsengine.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
xupv2p.h
|
Merge git://www.denx.de/git/u-boot
|
2007-05-08 00:32:35 +02:00 |
|
yosemite.h
|
Merge with git://www.denx.de/git/u-boot.git
|
2007-06-25 20:20:30 +02:00 |
|
yucca.h
|
ppc4xx: Add pci_pre_init() for 405 boards
|
2007-06-25 15:57:39 +02:00 |
|
zeus.h
|
ppc4xx: Add initial Zeus (PPC405EP) board support
|
2007-08-14 14:44:41 +02:00 |
|
zylonite.h
|
Remove BOARDLIBS usage completely
|
2007-04-23 12:00:22 +02:00 |
34886bbea2