phone-side
/
uboot-mt623x
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

* Patch by Martin Krause, 17 Jul 2003: 

add delay to get I2C working with "imm" command and s3c24x0_i2c.c

* Patch by Richard Woodruff, 17 July 03:
  - Fixed bug in OMAP1510 baud rate divisor settings.

* Patch by Nye Liu, 16 July 2003:
  MPC860FADS fixes:
  - add MPC86xADS support (uses MPC86xADS.h)
  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
    o PLPRCR changes
    o BRG changes (EXTAL/XTAL restricted to 10MHz)
    o don't trust gclk() software measurement by default, depend on
      CONFIG_8xx_GCLK_FREQ
  - add DRAM SIMM not installed detection
  - use more "correct" SDRAM initialization sequence
  - allow different SDRAM sizes (8xxADS has 8M)
  - default DER is 0
  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
  - rename MAMR/MBMR defines to be more consistent. Should eventually
    be merged into MxMR to better reflect the PowerQUICC datasheet.

* Patch by Yuli Barcohen, 16 Jul 2003:
  support new Motorola PQ2FADS-ZU evaluation board which replaced
  MPC8260ADS and MPC8266ADS
This commit is contained in:
wdenk 2003-07-17 23:16:40 +00:00
parent 945af8d723
commit 2535d60277
47 changed files with 1466 additions and 710 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
CHANGELOG
View File

@ -1,3 +1,33 @@
======================================================================
Changes for U-Boot 0.4.5:
======================================================================
* Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c
* Patch by Richard Woodruff, 17 July 03:
- Fixed bug in OMAP1510 baud rate divisor settings.
* Patch by Nye Liu, 16 July 2003:
MPC860FADS fixes:
- add MPC86xADS support (uses MPC86xADS.h)
- add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
o PLPRCR changes
o BRG changes (EXTAL/XTAL restricted to 10MHz)
o don't trust gclk() software measurement by default, depend on
CONFIG_8xx_GCLK_FREQ
- add DRAM SIMM not installed detection
- use more "correct" SDRAM initialization sequence
- allow different SDRAM sizes (8xxADS has 8M)
- default DER is 0
- remove unused MAMR defines from FADS860T.h (all done in fads.c)
- rename MAMR/MBMR defines to be more consistent. Should eventually
be merged into MxMR to better reflect the PowerQUICC datasheet.
* Patch by Yuli Barcohen, 16 Jul 2003:
support new Motorola PQ2FADS-ZU evaluation board which replaced
MPC8260ADS and MPC8266ADS
======================================================================
Changes for U-Boot 0.4.4:
======================================================================

12
MAKEALL
View File

@ -39,12 +39,12 @@ LIST_8xx=" \
IP860 IVML24 IVML24_128 IVML24_256 \
IVMS8 IVMS8_128 IVMS8_256 KUP4K \
LANTEC lwmon MBX MBX860T \
MHPC MVS1 NETVIA NETVIA_V2 \
NX823 pcu_e R360MPI RBC823 \
rmu RPXClassic RPXlite RRvision \
SM850 SPD823TS svm_sc8xx SXNI855T \
TOP860 TQM823L TQM823L_LCD TQM850L \
TQM855L TQM860L v37 \
MHPC MPC86xADS MVS1 NETVIA \
NETVIA_V2 NX823 pcu_e R360MPI \
RBC823 rmu RPXClassic RPXlite \
RRvision SM850 SPD823TS svm_sc8xx \
SXNI855T TOP860 TQM823L TQM823L_LCD \
TQM850L TQM855L TQM860L v37 \
"
#########################################################################

1
Makefile
View File

@ -227,6 +227,7 @@ ETX094_config : unconfig
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads

27
README
View File

@ -197,7 +197,7 @@ Directory Hierarchy:
- board/lwmon Files specific to LWMON boards
- board/mbx8xx Files specific to MBX boards
- board/mpc8260ads
Files specific to MMPC8260ADS boards
Files specific to MPC8260ADS and PQ2FADS-ZU boards
- board/mpl/ Files specific to boards manufactured by MPL
- board/mpl/common Common files for MPL boards
- board/mpl/pip405 Files specific to PIP405 boards
@ -383,6 +383,14 @@ The following options need to be configured:
the lcd display every second with
a "rotator" |\-/|\-/
- Board flavour: (if CONFIG_MPC8260ADS is defined)
CONFIG_ADSTYPE
Possible values are:
CFG_8260ADS - original MPC8260ADS
CFG_8266ADS - MPC8266ADS (untested)
CFG_PQ2FADS - PQ2FADS-ZU
- MPC824X Family Member (if CONFIG_MPC824X is defined)
Define exactly one of
CONFIG_MPC8240, CONFIG_MPC8245
@ -989,8 +997,8 @@ The following options need to be configured:
is FALSE, it clears it (low).
eg: #define I2C_SDA(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
else immr->im_cpm.cp_pbdat &= ~PB_SDA
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
else immr->im_cpm.cp_pbdat &= ~PB_SDA
I2C_SCL(bit)
@ -998,8 +1006,8 @@ The following options need to be configured:
is FALSE, it clears it (low).
eg: #define I2C_SCL(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
else immr->im_cpm.cp_pbdat &= ~PB_SCL
I2C_DELAY
@ -1687,9 +1695,10 @@ Low Level (hardware related) configuration options:
- CFG_DEFAULT_IMMR:
Default address of the IMMR after system reset.
Needed on some 8260 systems (MPC8260ADS and RPXsuper)
to be able to adjust the position of the IMMR
register after a reset.
Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
and RPXsuper) to be able to adjust the position of
the IMMR register after a reset.
- Floppy Disk Support:
CFG_FDC_DRIVE_NUMBER
@ -1862,7 +1871,7 @@ configurations; the following names are supported:
GENIETV_config TQM823L_config PIP405_config
GEN860T_config EBONY_config FPS860L_config
ELPT860_config cmi_mpc5xx_config NETVIA_config
at91rm9200dk_config omap1510inn_config
at91rm9200dk_config omap1510inn_config MPC8260ADS_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for

2
board/eltec/mhpc/mhpc.c
View File

@ -254,7 +254,7 @@ long int initdram (int board_type)
upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
memctl->memc_mbmr = MAMR_GPL_B4DIS;
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
memctl->memc_mptpr = MPTPR_PTP_DIV64;
memctl->memc_mar = 0x00008800;

863
board/fads/fads.c
View File

File diff suppressed because it is too large Load Diff

4
board/flagadm/flagadm.c
View File

@ -128,7 +128,7 @@ long int initdram (int board_type)
/* That should do it, just enable the periodic refresh in burst of 4*/
memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_4X;
memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_B4DIS);
memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_A4DIS);
size_b0 = 16*1024*1024;
@ -141,7 +141,7 @@ long int initdram (int board_type)
upmconfig(UPMB, (uint *)dsp_disp_table, sizeof(dsp_disp_table)/sizeof(uint));
memctl->memc_mbmr = MAMR_GPL_B4DIS;
memctl->memc_mbmr = MBMR_GPL_B4DIS;
memctl->memc_or4 = CFG_OR4;
memctl->memc_br4 = CFG_BR4;

2
board/genietv/genietv.c
View File

@ -163,7 +163,7 @@ long int initdram (int board_type)
memctl->memc_mcr = 0x80804105; /* SDRAM bank 1 */
/* Execute refresh 8 times */
memctl->memc_mbmr = (CFG_MBMR_8COL & ~MAMR_TLFB_MSK) | MAMR_TLFB_8X ;
memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X ;
memctl->memc_mcr = 0x80802130; /* SDRAM bank 0 - execute twice */

2
board/gth/gth.c
View File

@ -218,7 +218,7 @@ int _initsdram (uint base, uint * noMbytes)
sizeof (fpga_table) / sizeof (uint));
/* Enable UPWAITB */
mc->memc_mbmr = MAMR_GPL_B4DIS; /* (16-13) */
mc->memc_mbmr = MBMR_GPL_B4DIS; /* (16-13) */
/* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
mc->memc_or2 = 0xffc00000 | OR_BI;

4
board/ivm/ivm.c
View File

@ -246,14 +246,14 @@ initdram (int board_type)
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
memctl->memc_mbmr |= MAMR_PTBE; /* refresh enabled */
memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
/*
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}

4
board/lantec/lantec.c
View File

@ -149,7 +149,7 @@ long int initdram (int board_type)
udelay(1); /* 0x80006106 */
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x06);
memctl->memc_mamr |= MAMR_PTBE; /* refresh enabled */
memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
udelay(200);
@ -170,7 +170,7 @@ long int initdram (int board_type)
(ulong *)SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
/*
* Final mapping:

6
board/lwmon/lwmon.c
View File

@ -246,7 +246,7 @@ long int initdram (int board_type)
udelay (1); /* 0x80006106 */
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
memctl->memc_mamr |= MAMR_PTBE; /* refresh enabled */
memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
udelay (200);
@ -276,11 +276,11 @@ long int initdram (int board_type)
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTBE;
memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
udelay (500);
} else { /* back to 8 columns */
size_b0 = size8;
memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
udelay (500);
}

68
board/mpc8260ads/mpc8260ads.c
View File

@ -198,11 +198,19 @@ void reset_phy (void)
vu_long *bcsr = (vu_long *)CFG_BCSR;
/* reset the FEC port */
bcsr[1] &= ~FETH_RST;
bcsr[1] &= ~FETH1_RST;
udelay(2);
bcsr[1] |= FETH_RST;
bcsr[1] |= FETH1_RST;
udelay(1000);
#ifdef CONFIG_MII
#if CONFIG_ADSTYPE == CFG_PQ2FADS
/*
* Do not bypass Rx/Tx (de)scrambler (fix configuration error)
* Enable autonegotiation.
*/
miiphy_write(0, 16, 0x610);
miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
#else
/*
* Ethernet PHY is configured (by means of configuration pins)
* to work at 10Mb/s only. We reconfigure it using MII
@ -212,6 +220,7 @@ void reset_phy (void)
miiphy_write(0, PHY_ANAR, 0x01E1); /* Advertise all capabilities */
miiphy_write(0, PHY_DCR, 0x0000); /* Do not bypass Rx/Tx (de)scrambler */
miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#endif /* CONFIG_MII */
}
@ -219,7 +228,7 @@ int board_pre_init (void)
{
vu_long *bcsr = (vu_long *)CFG_BCSR;
bcsr[1] = ~FETHIEN & ~RS232EN_1;
bcsr[1] = ~FETHIEN1 & ~RS232EN_1;
return 0;
}
@ -231,12 +240,10 @@ long int initdram (int board_type)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar *ramaddr, c = 0xff;
/* Initialisation is for 16MB DIMM the board is shipped with */
long int msize = 16;
uint or = 0xFF000CA0;
uint psdmr = CFG_PSDMR;
uint psrt = CFG_PSRT;
long int msize;
uint or;
uint psdmr;
uint psrt;
int i;
@ -246,22 +253,29 @@ long int initdram (int board_type)
immap->im_siu_conf.sc_tescr1 = 0x00004000;
memctl->memc_mptpr = CFG_MPTPR;
/* init local sdram, bank 4 */
memctl->memc_lsrt = 0x00000010;
#ifdef CFG_LSDRAM_BASE
/* Init local bus SDRAM */
memctl->memc_lsrt = CFG_LSRT;
#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
memctl->memc_or3 = 0xFF803280;
memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861;
#else /* CS4 */
memctl->memc_or4 = 0xFFC01480;
memctl->memc_br4 = 0x04001861;
memctl->memc_lsdmr = 0x2886A522;
memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861;
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
ramaddr = (uchar *) CFG_LSDRAM_BASE;
*ramaddr = c;
memctl->memc_lsdmr = 0x0886A522;
memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
for (i = 0; i < 8; i++) {
*ramaddr = c;
}
memctl->memc_lsdmr = 0x1886A522;
memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
*ramaddr = c;
memctl->memc_lsdmr = 0x4086A522;
memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
#endif /* CFG_LSDRAM_BASE */
/* init sdram dimm */
/* Init 60x bus SDRAM */
#ifdef CONFIG_SPD_EEPROM
{
spd_eeprom_t spd;
@ -398,6 +412,16 @@ long int initdram (int board_type)
printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
#endif /* SPD_DEBUG */
}
#else /* !CONFIG_SPD_EEPROM */
#if CONFIG_ADSTYPE == CFG_PQ2FADS
msize = 32;
or = 0xFE002EC0;
#else
msize = 16;
or = 0xFF000CA0;
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
psdmr = CFG_PSDMR;
psrt = CFG_PSRT;
#endif /* CONFIG_SPD_EEPROM */
memctl->memc_psrt = psrt;
memctl->memc_or2 = or;
@ -415,12 +439,20 @@ long int initdram (int board_type)
*ramaddr = c;
#endif
/* return total ram size of DIMM */
/* return total 60x bus SDRAM size */
return (msize * 1024 * 1024);
}
int checkboard (void)
{
#if CONFIG_ADSTYPE == CFG_8260ADS
puts ("Board: Motorola MPC8260ADS\n");
#elif CONFIG_ADSTYPE == CFG_8266ADS
puts ("Board: Motorola MPC8266ADS\n");
#elif CONFIG_ADSTYPE == CFG_PQ2FADS
puts ("Board: Motorola PQ2FADS-ZU\n");
#else
puts ("Board: unknown\n");
#endif
return 0;
}

2
board/mvs1/u-boot.lds
View File

@ -57,7 +57,6 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/mpc8xx/start.o (.text)
cpu/mpc8xx/speed.o (.text)
common/dlmalloc.o (.text)
lib_ppc/ppcstring.o (.text)
lib_generic/vsprintf.o (.text)
@ -67,7 +66,6 @@ SECTIONS
lib_generic/string.o (.text)
lib_ppc/extable.o (.text)
lib_ppc/kgdb.o (.text)
/* lib_ppc/ticks.o (.text) */
. = env_offset;
common/environment.o(.text)

2
board/r360mpi/r360mpi.c
View File

@ -205,7 +205,7 @@ long int initdram (int board_type)
memctl->memc_br3 = CFG_BR3_CAN;
/* Initialize MBMR */
memctl->memc_mbmr = MAMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004;

2
board/siemens/CCM/ccm.c
View File

@ -267,7 +267,7 @@ void can_driver_enable (void)
volatile memctl8xx_t *memctl = &immap->im_memctl;
/* Initialize MBMR */
memctl->memc_mbmr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004;

8
board/siemens/pcu_e/pcu_e.c
View File

@ -217,9 +217,9 @@ initdram (int board_type)
#endif /* XXX */
reg = memctl->memc_mamr;
reg &= ~MAMR_TLFB_MSK; /* switch timer loop ... */
reg |= MAMR_TLFB_4X; /* ... to 4x */
reg |= MAMR_PTBE; /* enable refresh */
reg &= ~MAMR_TLFA_MSK; /* switch timer loop ... */
reg |= MAMR_TLFA_4X; /* ... to 4x */
reg |= MAMR_PTAE; /* enable refresh */
memctl->memc_mamr = reg;
udelay(200);
@ -246,7 +246,7 @@ initdram (int board_type)
size_b0 = dram_size (CFG_MAMR, (ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
#endif /* XXX */
memctl->memc_mamr = CFG_MAMR | MAMR_PTBE;
memctl->memc_mamr = CFG_MAMR | MAMR_PTAE;
/*
* Final mapping:

4
board/spd8xx/spd8xx.c
View File

@ -200,14 +200,14 @@ initdram (int board_type)
udelay(1);
memctl->memc_mcr = 0x80806106;
memctl->memc_mbmr |= MAMR_PTBE; /* refresh enabled */
memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
/*
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}

2
board/v37/v37.c
View File

@ -140,7 +140,7 @@ long int initdram (int board_type)
memctl->memc_br3 = CFG_BR3_CAN;
/* Initialize MBMR */
memctl->memc_mamr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
memctl->memc_mamr = MAMR_GPL_A4DIS; /* GPL_A4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004;

3
common/cmd_i2c.c
View File

@ -507,6 +507,9 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
if(i2c_write(chip, addr, alen, (char *)&data, size) != 0) {
printf("Error writing the chip.\n");
}
#ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
if (incrflag)
addr += size;
}

52
cpu/mpc8xx/cpu.c
View File

@ -42,12 +42,23 @@
static char *cpu_warning = "\n " \
"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
#if ((defined(CONFIG_MPC860) || defined(CONFIG_MPC855)) && \
#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
!defined(CONFIG_MPC862))
# ifdef CONFIG_MPC855
# if defined(CONFIG_MPC855)
# define ID_STR "PC855"
# elif defined(CONFIG_MPC852T)
# define ID_STR "PC852T"
# elif defined(CONFIG_MPC859T)
# define ID_STR "PC859T"
# elif defined(CONFIG_MPC859DSL)
# define ID_STR "PC859DSL"
# elif defined(CONFIG_MPC860P)
# define ID_STR "PC860P"
# elif defined(CONFIG_MPC866T)
# define ID_STR "PC866T"
# else
# define ID_STR "PC860"
# define ID_STR "PC86x" /* unknown 86x chip */
# endif
static int check_CPU (long clock, uint pvr, uint immr)
@ -68,6 +79,10 @@ static int check_CPU (long clock, uint pvr, uint immr)
m = 0;
switch (k) {
#ifdef CONFIG_MPC866_et_al
/* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
case 0x08000003: pre = 'M'; suf = ""; m = 1; break;
#else
case 0x00020001: pre = 'p'; suf = ""; break;
case 0x00030001: suf = ""; break;
case 0x00120003: suf = "A"; break;
@ -76,17 +91,16 @@ static int check_CPU (long clock, uint pvr, uint immr)
case 0x00200004: suf = "B"; break;
case 0x00300004: suf = "C"; break;
case 0x00310004: suf = "C1"; m = 1;
break;
case 0x00310004: suf = "C1"; m = 1; break;
case 0x00200064: mid = "SR"; suf = "B"; break;
case 0x00300065: mid = "SR"; suf = "C"; break;
case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
case 0x05010000: suf = "D3"; m = 1; break;
case 0x05020000: suf = "D4"; m = 1; break;
/* this value is not documented anywhere */
case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
#endif
default: suf = NULL; break;
}
@ -101,7 +115,7 @@ static int check_CPU (long clock, uint pvr, uint immr)
printf (" %u kB I-Cache", checkicache () >> 10);
printf (" %u kB D-Cache", checkdcache () >> 10);
/* lets check and see if we're running on a 860T (or P?) */
/* do we have a FEC (860T/P or 852/859/866)? */
immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
@ -114,6 +128,12 @@ static int check_CPU (long clock, uint pvr, uint immr)
putc ('\n');
#ifdef DEBUG
if(clock != measure_gclk()) {
printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
}
#endif
return 0;
}
@ -316,7 +336,7 @@ int checkicache (void)
volatile memctl8xx_t *memctl = &immap->im_memctl;
u32 cacheon = rd_ic_cst () & IDC_ENABLED;
#ifdef CONFIG_IP860
#ifdef CONFIG_IP86x
u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
#else
u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
@ -363,7 +383,7 @@ int checkdcache (void)
volatile memctl8xx_t *memctl = &immap->im_memctl;
u32 cacheon = rd_dc_cst () & IDC_ENABLED;
#ifdef CONFIG_IP860
#ifdef CONFIG_IP86x
u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
#else
u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
@ -462,8 +482,20 @@ unsigned long get_tbclk (void)
if (immr->im_clkrst.car_sccr & SCCR_TBS) {
return (gd->cpu_clk / 16);
}
#define PLPRCR_val(a) (((CFG_PLPRCR) & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
#ifdef CONFIG_MPC866_et_al
/* MFN
MFI + -------
MFD + 1
factor = -----------------
(PDF + 1) * 2^S
*/
factor = (((CFG_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
(PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
#else
factor = PLPRCR_val(MF)+1;
#endif
oscclk = gd->cpu_clk / factor;

1
cpu/mpc8xx/cpu_init.c
View File

@ -145,6 +145,7 @@ void cpu_init_f (volatile immap_t * immr)
defined(CONFIG_RPXCLASSIC) || \
defined(CONFIG_RPXLITE) || \
defined(CONFIG_SPD823TS) || \
defined(CONFIG_MPC86xADS) || \
(defined(CONFIG_MPC860T) && defined(CONFIG_FADS))
memctl->memc_br0 = CFG_BR0_PRELIM;

3
cpu/mpc8xx/fec.c
View File

@ -217,7 +217,8 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
#if defined(CONFIG_FADS) && defined(CONFIG_MPC860T)
#if defined(CONFIG_FADS) && \
( defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al) )
/* configure FADS for fast (FEC) ethernet, half-duplex */
/* The LXT970 needs about 50ms to recover from reset, so
* wait for it by discovering the PHY before leaving eth_init().

4
cpu/mpc8xx/interrupts.c
View File

@ -334,7 +334,11 @@ void timer_interrupt (struct pt_regs *regs)
/* Reset Timer Expired and Timers Interrupt Status */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
__asm__ ("nop");
#ifdef CONFIG_MPC866_et_al
immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
#else
immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
#endif
/* Restore Decrementer Count */
set_dec (decrementer_count);

6
cpu/mpc8xx/scc.c
View File

@ -192,9 +192,9 @@ static int scc_init(struct eth_device* dev, bd_t *bis)
volatile immap_t *immr = (immap_t *)CFG_IMMR;
#if defined(CONFIG_FADS)
#if defined(CONFIG_MPC860T)
/* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals. */
#ifdef CONFIG_FADS
#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
/* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
*((uint *) BCSR4) |= BCSR4_TFPLDL|BCSR4_TPSQEL;
*((uint *) BCSR1) &= ~BCSR1_ETHEN;

28
cpu/mpc8xx/serial.c
View File

@ -68,6 +68,23 @@
#error "console not correctly defined"
#endif
static void serial_setdivisor(volatile cpm8xx_t *cp)
{
DECLARE_GLOBAL_DATA_PTR;
int divisor=gd->cpu_clk/16/gd->baudrate;
if(divisor/16>0x1000) {
/* bad divisor, assume 50Mhz clock and 9600 baud */
divisor=(50*1000*1000)/16/9600;
}
if(divisor<=0x1000) {
cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
} else {
cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
}
}
#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
/*
@ -229,8 +246,6 @@ int serial_init (void)
void
serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
@ -242,8 +257,7 @@ serial_setbrg (void)
cp->cp_simode = 0x00000000;
cp->cp_brgc1 =
(((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN;
serial_setdivisor(cp);
}
#ifdef CONFIG_MODEM_SUPPORT
@ -506,8 +520,6 @@ int serial_init (void)
void
serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
@ -518,10 +530,8 @@ serial_setbrg (void)
*/
cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
/* no |= needed, since BRG1 is 000 */
cp->cp_brgc1 =
(((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN;
serial_setdivisor(cp);
}
void

35
cpu/mpc8xx/speed.c
View File

@ -32,7 +32,6 @@
#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
#if !defined(CONFIG_8xx_GCLK_FREQ)
/* Access functions for the Machine State Register */
static __inline__ unsigned long get_msr(void)
{
@ -46,7 +45,6 @@ static __inline__ void set_msr(unsigned long msr)
{
asm volatile("mtmsr %0" : : "r" (msr));
}
#endif
/* ------------------------------------------------------------------------- */
@ -83,16 +81,20 @@ static __inline__ void set_msr(unsigned long msr)
* CPU clock that is an even multiple of 0.1 MHz.
*/
int get_clocks (void)
unsigned long measure_gclk(void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *) CFG_IMMR;
#ifndef CONFIG_8xx_GCLK_FREQ
volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
ulong timer2_val;
ulong msr_val;
#ifdef CONFIG_MPC866_et_al
/* dont use OSCM, only use EXTCLK/512 */
immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
#else
immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
#endif
/* Reset + Stop Timer 2, no cascading
*/
timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
@ -158,10 +160,27 @@ int get_clocks (void)
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
immr->im_sit.sit_piscr &= ~PISCR_PTE;
gd->cpu_clk = ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
#ifdef CONFIG_MPC866_et_al
/* not using OSCM, using XIN, so scale appropriately */
return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
#else
return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
#endif
}
/*
* get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
* or (if it is not defined) measure_gclk() (which uses the ref clock)
* from above.
*/
int get_clocks (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *) CFG_IMMR;
#ifndef CONFIG_8xx_GCLK_FREQ
gd->cpu_clk = measure_gclk();
#else /* CONFIG_8xx_GCLK_FREQ */
/*
* If for some reason measuring the gclk frequency won't
* work, we return the hardwired value.

1
drivers/serial.c
View File

@ -51,6 +51,7 @@ static int calc_divisor (void)
console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
return (1); /* return 1 for base divisor */
}
console->osc_12m_sel = 0; /* clear if previsouly set */
#endif
return (CFG_NS16550_CLK / 16 / gd->baudrate);
}

14
include/common.h
View File

@ -43,6 +43,20 @@ typedef volatile unsigned char vu_char;
#endif
#ifdef CONFIG_8xx
#include <asm/8xx_immap.h>
#ifdef CONFIG_MPC860
#define CONFIG_MPC86x 1
#endif
#ifdef CONFIG_MPC860T
#define CONFIG_MPC86x 1
#endif
#if defined(CONFIG_MPC866P) || \
defined(CONFIG_MPC866T) || \
defined(CONFIG_MPC859T) || \
defined(CONFIG_MPC859DSL) || \
defined(CONFIG_MPC852T)
#define CONFIG_MPC866_et_al 1
#define CONFIG_MPC86x 1
#endif
#elif defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
#elif defined(CONFIG_8260)

6
include/commproc.h
View File

@ -707,10 +707,10 @@ typedef struct scc_enet {
/*** FADS860T********************************************************/
#if defined(CONFIG_MPC860T) && defined(CONFIG_FADS)
/* This ENET stuff is for the MPC860TFADS with ethernet on SCC1.
#if (defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al)) \
&& defined(CONFIG_FADS)
/* This ENET stuff is for the MPC860TFADS/MPC8xxADS with ethernet on SCC1.
*/
#ifdef CONFIG_SCC1_ENET
#define SCC_ENET 0
#endif /* CONFIG_SCC1_ETHERNET */

11
include/configs/ADS860.h
View File

@ -19,6 +19,7 @@
#include <mpc8xx_irq.h>
#define CONFIG_MPC860 1
#define CONFIG_MPC860T 1
#define CONFIG_ADS 1
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
@ -31,10 +32,12 @@
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
#define CFG_I2C_SLAVE 0x7F
#define MPC8XX_XIN 32768 /* 32.768 kHz input frequency */
#define MPC8XX_FACT 0x5F6 /* Multiply by 1526 */
#define CFG_8XX_XIN 32768 /* 32.768 kHz input frequency */
#define CFG_8XX_FACT 0x5F6 /* Multiply by 1526 */
/* MPC8XX_FACT * MPC8XX_XIN = 50 MHz */
#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 0
@ -136,7 +139,7 @@
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
@ -198,7 +201,7 @@
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
#define CFG_PLPRCR (((MPC8XX_FACT-1) << 20) | \
#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
/*-----------------------------------------------------------------------

1
include/configs/FADS823.h
View File

@ -23,6 +23,7 @@
#define CFG_PCMCIA_MEM_ADDR 0xe0000000
#define CFG_PCMCIA_MEM_SIZE 0x10000
#define CFG_IMMR 0xFF000000
#define CFG_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x02800000
#define BCSR_ADDR ((uint) 0xff010000)

1
include/configs/FADS850SAR.h
View File

@ -116,6 +116,7 @@
* Also NOTE that it doesn't mean SDRAM - it means MEMORY.
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
#define CFG_FLASH_BASE 0x02800000
#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
#if 0

89
include/configs/FADS860T.h
View File

@ -32,25 +32,33 @@
*/
#include <mpc8xx_irq.h>
#define CONFIG_MPC860 1
#define CONFIG_MPC860T 1
#define CONFIG_FADS 1
/* board type */
#define CONFIG_FADS 1 /* old/new FADS + new ADS */
/* processor type */
#define CONFIG_MPC860T 1 /* 860T */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 9600
#define CONFIG_BAUDRATE 38400
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#if 0
#define MPC8XX_FACT 10 /* Multiply by 10 */
#define MPC8XX_XIN 5000000 /* 5 MHz in */
#else
#define MPC8XX_FACT 12 /* Multiply by 12 */
#define MPC8XX_XIN 4000000 /* 4 MHz in */
#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
#if 0 /* old FADS */
# define CFG_8XX_FACT 12 /* Multiply by 12 */
# define CFG_8XX_XIN 4000000 /* 4 MHz in */
#else /* new FADS */
# define CFG_8XX_FACT 10 /* Multiply by 10 */
# define CFG_8XX_XIN 5000000 /* 5 MHz in */
#endif
#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
/* in general, we always know this for FADS+new ADS anyway */
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
/* most vanilla kernels do not like this, set to 0 if in doubt */
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 1
@ -59,8 +67,12 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_BOOTCOMMAND "bootm 2800100" /* autoboot command */
#define CONFIG_BOOTARGS ""
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp; " \
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
"bootm"
#undef CONFIG_WATCHDOG /* watchdog disabled */
@ -77,10 +89,10 @@
/* choose SCC1 ethernet (10BASET on motherboard)
* or FEC ethernet (10/100 on daughterboard)
*/
#if 1
#if 0
#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
#undef CONFIG_FEC_ENET /* disable FEC ethernet */
#else
#else /* all 86x cores have FECs, if in doubt, use it */
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
#define CFG_DISCOVER_PHY
@ -107,7 +119,11 @@
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#if (CFG_SDRAM_SIZE)
#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
#else
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
#endif
#define CFG_LOAD_ADDR 0x00100000
@ -120,7 +136,7 @@
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
/*-----------------------------------------------------------------------
/*----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
#define CFG_IMMR 0xFF000000
@ -141,6 +157,11 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
#ifdef CONFIG_FADS
# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
#else /* !CONFIG_FADS */ /* old ADS */
# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
#endif
#define CFG_FLASH_BASE 0x02800000
@ -218,7 +239,7 @@
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
/*-----------------------------------------------------------------------
@ -235,7 +256,7 @@
*-----------------------------------------------------------------------
*
*/
#define CFG_DER 0
#define CFG_DER 0
/* Because of the way the 860 starts up and assigns CS0 the
* entire address space, we have to set the memory controller
@ -280,36 +301,6 @@
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
/*
* Memory Periodic Timer Prescaler
*/
/* periodic timer for refresh */
#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
/*
* MAMR settings for SDRAM
*/
/* 8 column SDRAM */
#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
/* 9 column SDRAM */
#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
#define CFG_MAMR 0x13a01114
/*
* Internal Definitions
*
@ -425,7 +416,7 @@
#endif /* CONFIG_MPC850 */
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ
#define CONFIG_SDRAM_50MHZ 1
#ifdef CONFIG_MPC860T

2
include/configs/IAD210.h
View File

@ -354,7 +354,7 @@
*/
#define CFG_MAMR ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLB_A11 | \
MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X)

20
include/configs/IVML24.h
View File

@ -424,7 +424,7 @@
*/
/* periodic timer for refresh */
#define CFG_MAMR_PTB 204
#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@ -448,19 +448,19 @@
#if defined (CONFIG_IVML24_16M)
/* 8 column SDRAM */
# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_32M)
/* 128 MBit SDRAM */
# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_64M)
/* 128 MBit SDRAM */
# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#endif
/*

20
include/configs/IVMS8.h
View File

@ -408,7 +408,7 @@
*/
/* periodic timer for refresh */
#define CFG_MAMR_PTB 204
#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@ -431,19 +431,19 @@
#if defined (CONFIG_IVMS8_16M)
/* 8 column SDRAM */
# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_32M)
/* 128 MBit SDRAM */
#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_64M)
/* 128 MBit SDRAM */
#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#endif

77
include/configs/MPC8260ADS.h
View File

@ -9,7 +9,8 @@
*
* (C) Copyright 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Added support for SDRAM DIMMs SPD EEPROM, MII.
* Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
* Ported to PQ2FADS-ZU board.
*
* See file CREDITS for list of people who contributed to this
* project.
@ -41,6 +42,15 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */
/* ADS flavours */
#define CFG_8260ADS 1 /* MPC8260ADS */
#define CFG_8266ADS 2 /* MPC8266ADS */
#define CFG_PQ2FADS 3 /* PQ2FADS-ZU */
#ifndef CONFIG_ADSTYPE
#define CONFIG_ADSTYPE CFG_8260ADS
#endif /* CONFIG_ADSTYPE */
#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
/* allow serial and ethaddr to be overwritten */
@ -116,7 +126,9 @@
#endif /* CONFIG_ETHER_ON_FCC */
/* other options */
#if CONFIG_ADSTYPE == CFG_PQ2FADS
#undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */
#else
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
@ -124,18 +136,23 @@
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
#define CONFIG_SPD_ADDR 0x50
#endif
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#ifndef CONFIG_SDRAM_PBI
#define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */
#endif
#ifndef CONFIG_8260_CLKIN
#if CONFIG_ADSTYPE == CFG_PQ2FADS
#define CONFIG_8260_CLKIN 100000000 /* in Hz */
#else
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#endif
#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_CMD_BEDBUG | \
#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_BSP | \
CFG_CMD_DATE | \
@ -143,11 +160,11 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_FAT | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_IDE | \
CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
@ -155,8 +172,18 @@
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
CFG_CMD_VFD | \
CFG_CMD_USB ) )
CFG_CMD_USB | \
CFG_CMD_VFD
#if CONFIG_ADSTYPE == CFG_PQ2FADS
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_CMD_SDRAM | \
CFG_CMD_I2C | \
CFG_EXCLUDE ) )
#else
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_EXCLUDE ) )
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@ -200,7 +227,6 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CFG_FLASH_BASE 0xff800000
#define FLASH_BASE 0xff800000
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
#define CFG_FLASH_SIZE 8
@ -219,14 +245,16 @@
#define CFG_DEFAULT_IMMR 0x0F010000
#define CFG_IMMR 0xF0000000
#define CFG_BCSR 0x04500000
#define CFG_BCSR 0xF4500000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_LSDRAM_BASE 0x04000000
#define CFG_LSDRAM_BASE 0xD0000000
#define RS232EN_1 0x02000002
#define RS232EN_2 0x01000001
#define FETHIEN 0x08000008
#define FETH_RST 0x04000004
#define FETHIEN1 0x08000008
#define FETH1_RST 0x04000004
#define FETHIEN2 0x01000000
#define FETH2_RST 0x08000000
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
@ -288,19 +316,30 @@
#define CFG_SYPCR 0xFFFFFFC3
#define CFG_BCR 0x100C0000
#define CFG_SIUMCR 0x0A200000
#define CFG_SCCR 0x00000000
#define CFG_BR0_PRELIM 0xFF801801
#define CFG_OR0_PRELIM 0xFF800836
#define CFG_BR1_PRELIM 0x04501801
#define CFG_SCCR SCCR_DFBRG01
#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801
#define CFG_OR0_PRELIM 0xFF800876
#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
#define CFG_OR1_PRELIM 0xFFFF8010
#define CFG_RMR 0
#define CFG_RMR RMR_CSRE
#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
#define CFG_RCCR 0
#if CONFIG_ADSTYPE == CFG_PQ2FADS
#define CFG_PSDMR 0x824B36A3
#define CFG_PSRT 0x13
#define CFG_LSDMR 0x828737A3
#define CFG_LSRT 0x13
#define CFG_MPTPR 0x2800
#else
#define CFG_PSDMR 0x016EB452
#define CFG_MPTPR 0x00001900
#define CFG_PSRT 0x00000021
#define CFG_PSRT 0x21
#define CFG_LSDMR 0x0086A522
#define CFG_LSRT 0x21
#define CFG_MPTPR 0x1900
#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#define CFG_RESET_ADDRESS 0x04400000

438
include/configs/MPC86xADS.h Normal file
View File

@ -0,0 +1,438 @@
/*
* A collection of structures, addresses, and values associated with
* the Motorola MPC8xxADS board. Copied from the FADS config.
*
* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
*/
/*
* 1999-nov-26: The FADS is using the following physical memorymap:
*
* ff020000 -> ff02ffff : pcmcia
* ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxrom
* ff000000 -> ff00ffff : IMAP internal in the cpu
* fe000000 -> ffnnnnnn : flash connected to CS0, setup by 8xxrom
* 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
*/
/* ------------------------------------------------------------------------- */
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#include <mpc8xx_irq.h>
/* board type */
#define CONFIG_MPC86xADS 1 /* new ADS */
#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
/* new 86xADS only - pick one of these */
#define CONFIG_MPC866T 1
#undef CONFIG_MPC866P
#undef CONFIG_MPC859T
#undef CONFIG_MPC859DSL
#undef CONFIG_MPC852T
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 38400
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#ifdef CONFIG_MPC86xADS
# define CFG_8XX_FACT 5 /* Multiply by 5 */
# define CFG_8XX_XIN 10000000 /* 10 MHz in */
#else /* ! CONFIG_MPC86xADS */
# if 0 /* old FADS */
# define CFG_8XX_FACT 12 /* Multiply by 12 */
# define CFG_8XX_XIN 4000000 /* 4 MHz in */
# else /* new FADS */
# define CFG_8XX_FACT 10 /* Multiply by 10 */
# define CFG_8XX_XIN 5000000 /* 5 MHz in */
# endif
#endif /* ! CONFIG_MPC86xADS */
#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
/* in general, we always know this for FADS+new ADS anyway */
#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
/* most vanilla kernels do not like this, set to 0 if in doubt */
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 1
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp; " \
"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
"bootm"
/* #include "local.h" */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/* ATA / IDE and partition support */
#define CONFIG_MAC_PARTITION 1
#define CONFIG_DOS_PARTITION 1
#define CONFIG_ISO_PARTITION 1
#undef CONFIG_ATAPI
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
/* choose SCC1 ethernet (10BASET on motherboard)
* or FEC ethernet (10/100 on daughterboard)
*/
#if 0
#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
#undef CONFIG_FEC_ENET /* disable FEC ethernet */
#else /* all 86x cores have FECs, if in doubt, use it */
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
#define CFG_DISCOVER_PHY
#endif
#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
#endif
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#undef CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=>" /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
#if (CFG_SDRAM_SIZE)
#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
#else
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
#endif
#define CFG_LOAD_ADDR 0x00100000
#define CFG_HZ 1000 /* decr freq: 1 ms ticks */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
/*-----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
#define CFG_IMMR 0xFF000000
#define CFG_IMMR_SIZE ((uint)(64 * 1024))
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
#ifdef CONFIG_FADS
# ifdef CONFIG_MPC86xADS /* new ADS */
# define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */
# else /* old/new FADS */
# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
# endif
#else /* !CONFIG_FADS */ /* old ADS */
# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
#endif
#define CFG_FLASH_BASE 0x02800000
#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00040000
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
* SYPCR can only be written once after reset!
*-----------------------------------------------------------------------
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
*/
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif
/*-----------------------------------------------------------------------
* SIUMCR - SIU Module Configuration 11-6
*-----------------------------------------------------------------------
* PCMCIA config., multi-function pin tri-state
*/
#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
*-----------------------------------------------------------------------
* Clear Reference Interrupt Status, Timebase freezing enabled
*/
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
/*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control 11-31
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
*/
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS)
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
*-----------------------------------------------------------------------
* Set clock output, timebase and RTC source and divider,
* power management and some other internal clocks
*/
#define SCCR_MASK SCCR_EBDF11
#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
/*-----------------------------------------------------------------------
*
*-----------------------------------------------------------------------
*
*/
#define CFG_DER 0
/* Because of the way the 860 starts up and assigns CS0 the
* entire address space, we have to set the memory controller
* differently. Normally, you write the option register
* first, and then enable the chip select by writing the
* base register. For CS0, you must write the base register
* first, followed by the option register.
*/
/*
* Init Memory Controller:
*
* BR0/1 and OR0/1 (FLASH)
*/
/* the other CS:s are determined by looking at parameters in BCSRx */
#define BCSR_ADDR ((uint) 0xFF010000)
#define BCSR_SIZE ((uint)(64 * 1024))
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
#ifdef USE_REAL_FLASH_VALUES
/*
* The "default" behaviour with 1Mbyte initial doesn't work for us!
*/
#define CFG_OR0_PRELIM 0x0FFC00D34 /* Real values for the board */
#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */
#else
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
#endif
/* BCSRx - Board Control and Status Registers */
#define CFG_OR1_REMAP CFG_OR0_REMAP
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
/* values according to the manual */
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
#define BCSR0 ((uint) (BCSR_ADDR + 00))
#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
#define BCSR4 ((uint) (BCSR_ADDR + 0x10))
/* FADS bitvalues by Helmut Buchsbaum
* see MPC8xxADS User's Manual for a proper description
* of the following structures
*/
#define BCSR0_ERB ((uint)0x80000000)
#define BCSR0_IP ((uint)0x40000000)
#define BCSR0_BDIS ((uint)0x10000000)
#define BCSR0_BPS_MASK ((uint)0x0C000000)
#define BCSR0_ISB_MASK ((uint)0x01800000)
#define BCSR0_DBGC_MASK ((uint)0x00600000)
#define BCSR0_DBPC_MASK ((uint)0x00180000)
#define BCSR0_EBDF_MASK ((uint)0x00060000)
#define BCSR1_FLASH_EN ((uint)0x80000000)
#define BCSR1_DRAM_EN ((uint)0x40000000)
#define BCSR1_ETHEN ((uint)0x20000000)
#define BCSR1_IRDEN ((uint)0x10000000)
#define BCSR1_FLASH_CFG_EN ((uint)0x08000000)
#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
#define BCSR1_BCSR_EN ((uint)0x02000000)
#define BCSR1_RS232EN_1 ((uint)0x01000000)
#define BCSR1_PCCEN ((uint)0x00800000)
#define BCSR1_PCCVCC0 ((uint)0x00400000)
#define BCSR1_PCCVPP_MASK ((uint)0x00300000)
#define BCSR1_DRAM_HALF_WORD ((uint)0x00080000)
#define BCSR1_RS232EN_2 ((uint)0x00040000)
#define BCSR1_SDRAM_EN ((uint)0x00020000)
#define BCSR1_PCCVCC1 ((uint)0x00010000)
#define BCSR2_FLASH_PD_MASK ((uint)0xF0000000)
#define BCSR2_DRAM_PD_MASK ((uint)0x07800000)
#define BCSR2_DRAM_PD_SHIFT (23)
#define BCSR2_EXTTOLI_MASK ((uint)0x00780000)
#define BCSR2_DBREVNR_MASK ((uint)0x00030000)
#define BCSR3_DBID_MASK ((ushort)0x3800)
#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
#define BCSR3_BREVNR0 ((ushort)0x0080)
#define BCSR3_FLASH_PD_MASK ((ushort)0x0070)
#define BCSR3_BREVN1 ((ushort)0x0008)
#define BCSR3_BREVN2_MASK ((ushort)0x0003)
#define BCSR4_ETHLOOP ((uint)0x80000000)
#define BCSR4_TFPLDL ((uint)0x40000000)
#define BCSR4_TPSQEL ((uint)0x20000000)
#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
#define BCSR4_FETH_EN ((uint)0x08000000)
#define BCSR4_FETHCFG0 ((uint)0x04000000)
#define BCSR4_FETHFDE ((uint)0x02000000)
#define BCSR4_FETHCFG1 ((uint)0x00400000)
#define BCSR4_FETHRST ((uint)0x00200000)
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
/* Interrupt level assignments.
*/
#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
/* Machine type
*/
#define _MACH_8xx (_MACH_fads)
#define CONFIG_DISK_SPINUP_TIME 1000000
/* PCMCIA configuration */
#define PCMCIA_MAX_SLOTS 2
#ifdef CONFIG_MPC860
#define PCMCIA_SLOT_A 1
#endif
/*#define CFG_PCMCIA_MEM_SIZE ( 64 << 20) */
#define CFG_PCMCIA_MEM_ADDR (0x50000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0x54000000)
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
#define CFG_PCMCIA_ATTRB_ADDR (0x58000000)
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR (0x5C000000)
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
/* we have 8 windows, we take everything up to 60000000 */
#define CFG_ATA_IDE0_OFFSET 0x0000
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
/* Offset for data I/O */
#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
/* Offset for normal register accesses */
#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET 0x0000
/*#define CFG_ATA_ALT_OFFSET 0x0100 */
#endif /* __CONFIG_H */

3
include/configs/RPXClassic.h
View File

@ -331,8 +331,7 @@
*
*/
/* #define CFG_DER 0x2002000F */
/* #define CFG_DER 0 */
#define CFG_DER 0x0082000F
#define CFG_DER 0
/*
* Init Memory Controller:

8
include/configs/SPD823TS.h
View File

@ -381,7 +381,7 @@
*/
/* periodic timer for refresh */
#define CFG_MAMR_PTB 204
#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@ -396,9 +396,9 @@
*/
/* 8 column SDRAM */
#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
/*
* Internal Definitions

10
include/configs/pcu_e.h
View File

@ -518,11 +518,11 @@
#define CFG_MAMR_PTA 0x30 /* = 48 */
#define CFG_MAMR ( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
MAMR_AMB_TYPE_1 | \
MAMR_G0CLB_A10 | \
MAMR_RLFB_1X | \
MAMR_WLFB_1X | \
MAMR_TLFB_8X )
MAMR_AMA_TYPE_1 | \
MAMR_G0CLA_A10 | \
MAMR_RLFA_1X | \
MAMR_WLFA_1X | \
MAMR_TLFA_8X )
/*
* Internal Definitions

3
include/configs/v37.h
View File

@ -296,8 +296,7 @@
*-----------------------------------------------------------------------
*
*/
#define CFG_DER 0x0082000F
/*#define CFG_DER 0*/
#define CFG_DER 0
/*
* Init Memory Controller:

287
include/mpc8xx.h
View File

@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@ -121,8 +121,8 @@
* RSR - Reset Status Register 5-4
*/
#define RSR_JTRS 0x01000000 /* JTAG Reset Status */
#define RSR_DBSRS 0x02000000 /* Debug Port Soft Reset Status */
#define RSR_DBHRS 0x04000000 /* Debug Port Hard Reset Status */
#define RSR_DBSRS 0x02000000 /* Debug Port Soft Reset Status */
#define RSR_DBHRS 0x04000000 /* Debug Port Hard Reset Status */
#define RSR_CSRS 0x08000000 /* Check Stop Reset Status */
#define RSR_SWRS 0x10000000 /* Software Watchdog Reset Status*/
#define RSR_LLRS 0x20000000 /* Loss-of-Lock Reset Status */
@ -134,21 +134,42 @@
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*/
#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */
#ifdef CONFIG_MPC866_et_al
#define PLPRCR_MF_MSK 0xffff0000 /* Multiplication factor bits */
#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */
#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/
#define PLPRCR_MFD_MSK 0x03c00000 /* Multiplication factor denominator bits */
#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/
#define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */
#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift*/
#define PLPRCR_MFI_MSK 0x000f0000 /* Multiplication factor integer bits */
#define PLPRCR_MFI_SHIFT 0x00000010 /* Multiplication factor integer shift*/
#else
#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */
#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */
#endif
#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */
#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */
#ifndef CONFIG_MPC866_et_al
#define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */
#endif
#define PLPRCR_CSRC 0x00000400 /* Clock Source */
#ifndef CONFIG_MPC866_et_al
#define PLPRCR_LPM_MSK 0x00000300 /* Low Power Mode mask */
#define PLPRCR_LPM_NORMAL 0x00000000 /* normal power management mode */
#define PLPRCR_LPM_DOZE 0x00000100 /* doze power management mode */
#define PLPRCR_LPM_SLEEP 0x00000200 /* sleep power management mode */
#define PLPRCR_LPM_DEEP_SLEEP 0x00000300 /* deep sleep power mgt mode */
#define PLPRCR_LPM_DOWN 0x00000300 /* down power management mode */
#endif
#define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */
#define PLPRCR_LOLRE 0x00000040 /* Loss Of Lock Reset Enable */
#define PLPRCR_FIOPD 0x00000020 /* Force I/O Pull Down */
#ifdef CONFIG_MPC866_et_al
#define PLPRCR_PDF_MSK 0x0000001e /* Predivision Factor bits */
#define PLPRCR_PDF_SHIFT 0x00000001 /* Predivision Factor shift value */
#define PLPRCR_DBRMO 0x00000001 /* DPLL BRM Order bit */
#endif
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
@ -261,8 +282,8 @@
* MCR - Memory Command Register
*/
#define MCR_OP_WRITE 0x00000000 /* WRITE command */
#define MCR_OP_READ 0x40000000 /* READ command */
#define MCR_OP_RUN 0x80000000 /* RUN command */
#define MCR_OP_READ 0x40000000 /* READ command */
#define MCR_OP_RUN 0x80000000 /* RUN command */
#define MCR_UPM_A 0x00000000 /* Select UPM A */
#define MCR_UPM_B 0x00800000 /* Select UPM B */
#define MCR_MB_CS0 0x00000000 /* Use Chip Select /CS0 */
@ -359,138 +380,138 @@
/*-----------------------------------------------------------------------
* Machine B Mode Register 16-13
*/
#define MAMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */
#define MAMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */
#define MAMR_PTBE 0x00800000 /* Periodic Timer B Enable */
#define MAMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */
#define MAMR_AMB_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */
#define MAMR_AMB_TYPE_1 0x00100000 /* Addess Multiplexing Type 1 */
#define MAMR_AMB_TYPE_2 0x00200000 /* Addess Multiplexing Type 2 */
#define MAMR_AMB_TYPE_3 0x00300000 /* Addess Multiplexing Type 3 */
#define MAMR_AMB_TYPE_4 0x00400000 /* Addess Multiplexing Type 4 */
#define MAMR_AMB_TYPE_5 0x00500000 /* Addess Multiplexing Type 5 */
#define MAMR_DSB_MSK 0x00060000 /* Disable Timer period mask */
#define MAMR_DSB_1_CYCL 0x00000000 /* 1 cycle Disable Period */
#define MAMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */
#define MAMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */
#define MAMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */
#define MAMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */
#define MAMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */
#define MAMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */
#define MAMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */
#define MAMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */
#define MAMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */
#define MAMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */
#define MAMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */
#define MAMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */
#define MAMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */
#define MAMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */
#define MAMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */
#define MAMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */
#define MAMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */
#define MAMR_RLFB_4X 0x00000400 /* The Read Loop is executed 4 times */
#define MAMR_RLFB_5X 0x00000500 /* The Read Loop is executed 5 times */
#define MAMR_RLFB_6X 0x00000600 /* The Read Loop is executed 6 times */
#define MAMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */
#define MAMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */
#define MAMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */
#define MAMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */
#define MAMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */
#define MAMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */
#define MAMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */
#define MAMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */
#define MAMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */
#define MAMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */
#define MAMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */
#define MAMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */
#define MAMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */
#define MAMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */
#define MAMR_WLFB_4X 0x00000040 /* The Write Loop is executed 4 times */
#define MAMR_WLFB_5X 0x00000050 /* The Write Loop is executed 5 times */
#define MAMR_WLFB_6X 0x00000060 /* The Write Loop is executed 6 times */
#define MAMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */
#define MAMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */
#define MAMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */
#define MAMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */
#define MAMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */
#define MAMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */
#define MAMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */
#define MAMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */
#define MAMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */
#define MAMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */
#define MAMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */
#define MAMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */
#define MAMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */
#define MAMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */
#define MAMR_TLFB_4X 0x00000004 /* The Timer Loop is executed 4 times */
#define MAMR_TLFB_5X 0x00000005 /* The Timer Loop is executed 5 times */
#define MAMR_TLFB_6X 0x00000006 /* The Timer Loop is executed 6 times */
#define MAMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */
#define MAMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */
#define MAMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */
#define MAMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */
#define MAMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */
#define MAMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */
#define MAMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */
#define MAMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */
#define MAMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */
#define MAMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */
#define MBMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */
#define MBMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */
#define MBMR_PTBE 0x00800000 /* Periodic Timer B Enable */
#define MBMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */
#define MBMR_AMB_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */
#define MBMR_AMB_TYPE_1 0x00100000 /* Addess Multiplexing Type 1 */
#define MBMR_AMB_TYPE_2 0x00200000 /* Addess Multiplexing Type 2 */
#define MBMR_AMB_TYPE_3 0x00300000 /* Addess Multiplexing Type 3 */
#define MBMR_AMB_TYPE_4 0x00400000 /* Addess Multiplexing Type 4 */
#define MBMR_AMB_TYPE_5 0x00500000 /* Addess Multiplexing Type 5 */
#define MBMR_DSB_MSK 0x00060000 /* Disable Timer period mask */
#define MBMR_DSB_1_CYCL 0x00000000 /* 1 cycle Disable Period */
#define MBMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */
#define MBMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */
#define MBMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */
#define MBMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */
#define MBMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */
#define MBMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */
#define MBMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */
#define MBMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */
#define MBMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */
#define MBMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */
#define MBMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */
#define MBMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */
#define MBMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */
#define MBMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */
#define MBMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */
#define MBMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */
#define MBMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */
#define MBMR_RLFB_4X 0x00000400 /* The Read Loop is executed 4 times */
#define MBMR_RLFB_5X 0x00000500 /* The Read Loop is executed 5 times */
#define MBMR_RLFB_6X 0x00000600 /* The Read Loop is executed 6 times */
#define MBMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */
#define MBMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */
#define MBMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */
#define MBMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */
#define MBMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */
#define MBMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */
#define MBMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */
#define MBMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */
#define MBMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */
#define MBMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */
#define MBMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */
#define MBMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */
#define MBMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */
#define MBMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */
#define MBMR_WLFB_4X 0x00000040 /* The Write Loop is executed 4 times */
#define MBMR_WLFB_5X 0x00000050 /* The Write Loop is executed 5 times */
#define MBMR_WLFB_6X 0x00000060 /* The Write Loop is executed 6 times */
#define MBMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */
#define MBMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */
#define MBMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */
#define MBMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */
#define MBMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */
#define MBMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */
#define MBMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */
#define MBMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */
#define MBMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */
#define MBMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */
#define MBMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */
#define MBMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */
#define MBMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */
#define MBMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */
#define MBMR_TLFB_4X 0x00000004 /* The Timer Loop is executed 4 times */
#define MBMR_TLFB_5X 0x00000005 /* The Timer Loop is executed 5 times */
#define MBMR_TLFB_6X 0x00000006 /* The Timer Loop is executed 6 times */
#define MBMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */
#define MBMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */
#define MBMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */
#define MBMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */
#define MBMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */
#define MBMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */
#define MBMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */
#define MBMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */
#define MBMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */
#define MBMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */
/*-----------------------------------------------------------------------
* Timer Global Configuration Register 18-8
*/
#define TGCR_CAS4 0x8000 /* Cascade Timer 3 and 4 */
#define TGCR_FRZ4 0x4000 /* Freeze timer 4 */
#define TGCR_STP4 0x2000 /* Stop timer 4 */
#define TGCR_RST4 0x1000 /* Reset timer 4 */
#define TGCR_STP4 0x2000 /* Stop timer 4 */
#define TGCR_RST4 0x1000 /* Reset timer 4 */
#define TGCR_GM2 0x0800 /* Gate Mode for Pin 2 */
#define TGCR_FRZ3 0x0400 /* Freeze timer 3 */
#define TGCR_STP3 0x0200 /* Stop timer 3 */
#define TGCR_RST3 0x0100 /* Reset timer 3 */
#define TGCR_STP3 0x0200 /* Stop timer 3 */
#define TGCR_RST3 0x0100 /* Reset timer 3 */
#define TGCR_CAS2 0x0080 /* Cascade Timer 1 and 2 */
#define TGCR_FRZ2 0x0040 /* Freeze timer 2 */
#define TGCR_STP2 0x0020 /* Stop timer 2 */
#define TGCR_RST2 0x0010 /* Reset timer 2 */
#define TGCR_STP2 0x0020 /* Stop timer 2 */
#define TGCR_RST2 0x0010 /* Reset timer 2 */
#define TGCR_GM1 0x0008 /* Gate Mode for Pin 1 */
#define TGCR_FRZ1 0x0004 /* Freeze timer 1 */
#define TGCR_STP1 0x0002 /* Stop timer 1 */
#define TGCR_RST1 0x0001 /* Reset timer 1 */
#define TGCR_STP1 0x0002 /* Stop timer 1 */
#define TGCR_RST1 0x0001 /* Reset timer 1 */
/*-----------------------------------------------------------------------
* Timer Mode Register 18-9
*/
#define TMR_PS_MSK 0xFF00 /* Prescaler Value */
#define TMR_PS_SHIFT 8 /* Prescaler position */
#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */
#define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */
#define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
#define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */
#define TMR_OM 0x0020 /* Output Mode */
#define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */
#define TMR_FRR 0x0008 /* Free Run/Restart */
#define TMR_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
#define TMR_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
#define TMR_ICLK_IN_GEN 0x0002 /* Internal General system clock */
#define TMR_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16 */
#define TMR_ICLK_TIN_PIN 0x0006 /* TINx pin */
#define TMR_GE 0x0001 /* Gate Enable */
#define TMR_PS_MSK 0xFF00 /* Prescaler Value */
#define TMR_PS_SHIFT 8 /* Prescaler position */
#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */
#define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */
#define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
#define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */
#define TMR_OM 0x0020 /* Output Mode */
#define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */
#define TMR_FRR 0x0008 /* Free Run/Restart */
#define TMR_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
#define TMR_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
#define TMR_ICLK_IN_GEN 0x0002 /* Internal General system clock */
#define TMR_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16 */
#define TMR_ICLK_TIN_PIN 0x0006 /* TINx pin */
#define TMR_GE 0x0001 /* Gate Enable */
/*-----------------------------------------------------------------------
* I2C Controller Registers
*/
#define I2MOD_REVD 0x20 /* Reverese Data */
#define I2MOD_REVD 0x20 /* Reverese Data */
#define I2MOD_GCD 0x10 /* General Call Disable */
#define I2MOD_FLT 0x08 /* Clock Filter */
#define I2MOD_PDIV32 0x00 /* Pre-Divider 32 */
#define I2MOD_PDIV16 0x02 /* Pre-Divider 16 */
#define I2MOD_PDIV8 0x04 /* Pre-Divider 8 */
#define I2MOD_PDIV4 0x06 /* Pre-Divider 4 */
#define I2MOD_PDIV8 0x04 /* Pre-Divider 8 */
#define I2MOD_PDIV4 0x06 /* Pre-Divider 4 */
#define I2MOD_EN 0x01 /* Enable */
#define I2CER_TXE 0x10 /* Tx Error */
#define I2CER_TXE 0x10 /* Tx Error */
#define I2CER_BSY 0x04 /* Busy Condition */
#define I2CER_TXB 0x02 /* Tx Buffer Transmitted */
#define I2CER_RXB 0x01 /* Rx Buffer Received */
@ -514,7 +535,7 @@
/*-----------------------------------------------------------------------
* PCMCIA Interface General Control Register 17-12
*/
#define PCMCIA_GCRX_CXRESET 0x00000040
#define PCMCIA_GCRX_CXRESET 0x00000040
#define PCMCIA_GCRX_CXOE 0x00000080
#define PCMCIA_VS1(slot) (0x80000000 >> (slot << 4))
@ -539,36 +560,36 @@
*
* Bank Sizes:
*/
#define PCMCIA_BSIZE_1 0x00000000 /* Bank size: 1 Bytes */
#define PCMCIA_BSIZE_2 0x08000000 /* Bank size: 2 Bytes */
#define PCMCIA_BSIZE_4 0x18000000 /* Bank size: 4 Bytes */
#define PCMCIA_BSIZE_8 0x10000000 /* Bank size: 8 Bytes */
#define PCMCIA_BSIZE_16 0x30000000 /* Bank size: 16 Bytes */
#define PCMCIA_BSIZE_32 0x38000000 /* Bank size: 32 Bytes */
#define PCMCIA_BSIZE_64 0x28000000 /* Bank size: 64 Bytes */
#define PCMCIA_BSIZE_128 0x20000000 /* Bank size: 128 Bytes */
#define PCMCIA_BSIZE_256 0x60000000 /* Bank size: 256 Bytes */
#define PCMCIA_BSIZE_512 0x68000000 /* Bank size: 512 Bytes */
#define PCMCIA_BSIZE_1K 0x78000000 /* Bank size: 1 kB */
#define PCMCIA_BSIZE_2K 0x70000000 /* Bank size: 2 kB */
#define PCMCIA_BSIZE_4K 0x50000000 /* Bank size: 4 kB */
#define PCMCIA_BSIZE_8K 0x58000000 /* Bank size: 8 kB */
#define PCMCIA_BSIZE_1 0x00000000 /* Bank size: 1 Bytes */
#define PCMCIA_BSIZE_2 0x08000000 /* Bank size: 2 Bytes */
#define PCMCIA_BSIZE_4 0x18000000 /* Bank size: 4 Bytes */
#define PCMCIA_BSIZE_8 0x10000000 /* Bank size: 8 Bytes */
#define PCMCIA_BSIZE_16 0x30000000 /* Bank size: 16 Bytes */
#define PCMCIA_BSIZE_32 0x38000000 /* Bank size: 32 Bytes */
#define PCMCIA_BSIZE_64 0x28000000 /* Bank size: 64 Bytes */
#define PCMCIA_BSIZE_128 0x20000000 /* Bank size: 128 Bytes */
#define PCMCIA_BSIZE_256 0x60000000 /* Bank size: 256 Bytes */
#define PCMCIA_BSIZE_512 0x68000000 /* Bank size: 512 Bytes */
#define PCMCIA_BSIZE_1K 0x78000000 /* Bank size: 1 kB */
#define PCMCIA_BSIZE_2K 0x70000000 /* Bank size: 2 kB */
#define PCMCIA_BSIZE_4K 0x50000000 /* Bank size: 4 kB */
#define PCMCIA_BSIZE_8K 0x58000000 /* Bank size: 8 kB */
#define PCMCIA_BSIZE_16K 0x48000000 /* Bank size: 16 kB */
#define PCMCIA_BSIZE_32K 0x40000000 /* Bank size: 32 kB */
#define PCMCIA_BSIZE_64K 0xC0000000 /* Bank size: 64 kB */
#define PCMCIA_BSIZE_128K 0xC8000000 /* Bank size: 128 kB */
#define PCMCIA_BSIZE_256K 0xD8000000 /* Bank size: 256 kB */
#define PCMCIA_BSIZE_512K 0xD0000000 /* Bank size: 512 kB */
#define PCMCIA_BSIZE_1M 0xF0000000 /* Bank size: 1 MB */
#define PCMCIA_BSIZE_2M 0xF8000000 /* Bank size: 2 MB */
#define PCMCIA_BSIZE_4M 0xE8000000 /* Bank size: 4 MB */
#define PCMCIA_BSIZE_8M 0xE0000000 /* Bank size: 8 MB */
#define PCMCIA_BSIZE_1M 0xF0000000 /* Bank size: 1 MB */
#define PCMCIA_BSIZE_2M 0xF8000000 /* Bank size: 2 MB */
#define PCMCIA_BSIZE_4M 0xE8000000 /* Bank size: 4 MB */
#define PCMCIA_BSIZE_8M 0xE0000000 /* Bank size: 8 MB */
#define PCMCIA_BSIZE_16M 0xA0000000 /* Bank size: 16 MB */
#define PCMCIA_BSIZE_32M 0xA8000000 /* Bank size: 32 MB */
#define PCMCIA_BSIZE_64M 0xB8000000 /* Bank size: 64 MB */
/* PCMCIA Timing */
#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */
#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */
@ -579,10 +600,10 @@
/* PCMCIA Region Select */
#define PCMCIA_PRS_MEM 0x00000000 /* Common Memory Space */
#define PCMCIA_PRS_ATTR 0x00000010 /* Attribute Space */
#define PCMCIA_PRS_IO 0x00000018 /* I/O Space */
#define PCMCIA_PRS_DMA 0x00000020 /* DMA, normal transfer */
#define PCMCIA_PRS_IO 0x00000018 /* I/O Space */
#define PCMCIA_PRS_DMA 0x00000020 /* DMA, normal transfer */
#define PCMCIA_PRS_DMA_LAST 0x00000028 /* DMA, last transactn */
#define PCMCIA_PRS_CEx 0x00000030 /* A[22:23] ==> CE1,CE2 */
#define PCMCIA_PRS_CEx 0x00000030 /* A[22:23] ==> CE1,CE2 */
#define PCMCIA_PSLOT_A 0x00000000 /* Slot A */
#define PCMCIA_PSLOT_B 0x00000004 /* Slot B */

2
include/pcmcia.h
View File

@ -43,7 +43,7 @@
#elif defined(CONFIG_ADS) /* The ADS board use SLOT_A */
# define CONFIG_PCMCIA_SLOT_A
#elif defined(CONFIG_FADS) /* The FADS series are a mess */
# if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
# if defined(CONFIG_MPC86x || defined(CONFIG_MPC821)
# define CONFIG_PCMCIA_SLOT_A
# else
# define CONFIG_PCMCIA_SLOT_B

2
include/version.h
View File

@ -24,6 +24,6 @@
#ifndef __VERSION_H__
#define __VERSION_H__
#define U_BOOT_VERSION "U-Boot 0.4.4"
#define U_BOOT_VERSION "U-Boot 0.4.5"
#endif /* __VERSION_H__ */

4
post/ether.c
View File

@ -130,8 +130,8 @@ CPM_CR_CH_SCC4 };
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#if defined(CONFIG_FADS)
#if defined(CONFIG_MPC860T)
/* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals. */
#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
/* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
*((uint *) BCSR1) &= ~BCSR1_ETHEN;