27e166b875
Fix compiler problem with at91rm9200dk board.
...
Patch by Eugen Bigz, 19 Dec 2005
2005-12-19 13:02:45 +01:00
e6b6d16de7
Merge with /home/sr/git/u-boot
2005-12-16 17:39:27 +01:00
a9e642e2f8
MPC5200: Set PCI retry counter to 0 = infinite retry;
...
The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005
2005-12-16 15:14:18 +01:00
81a3170b15
Changes to Yellowstone & Yosemite 440EP/GR eval boards:
...
- Changed GPIO setup to enable another address line in order to
address 64M of FLASH.
- Added function sdram_tr1_set to auto calculate the tr1 value for
the DDR.
Patch by Steven Blakeslee, 12 Dec 2005
2005-12-15 09:43:12 +01:00
e43232dee8
Merge with /home/m8/git/u-boot
2005-12-14 15:05:59 +01:00
7481266e4e
2005-12-12 16:06:05 +01:00
3a7b142b62
Change port configuration for O2DNT (CODEC1 on PSC1)
2005-12-06 20:33:07 +01:00
a889bd27ef
Fix DPRAM offset/size for MPC8541/8555.
...
Simplify TQM85xx Makefile handling.
2005-12-06 15:02:31 +01:00
41253be442
Fix data overflow (typo?) in rtc/ds1302.c
2005-12-04 11:20:57 +01:00
f013dacf0a
Code cleanup, especially MIPS for GCC 4.x
2005-12-04 00:40:34 +01:00
c75eba3b41
Fix U-Boot compilation for MIPS boards using ELDK 4.0
2005-12-01 02:15:07 +01:00
4a86d779ff
Merge with /home/sr/git/u-boot
2005-12-01 01:38:13 +01:00
b6f8435664
Adjust TQM834x PHY addresses for latest hardware revision.
2005-12-01 01:17:24 +01:00
d00de23b15
Increase malloc arena on TQM5200 board to 256 kB.
...
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
2005-12-01 00:55:19 +01:00
d9785c14bf
Fix miiphy global data initialization (problem on 4xx boards when no
...
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().
Based on initial patch for 4xx platform by Matthias Fuchs.
2005-11-30 18:06:04 +01:00
d96f41e016
Add support for TQM8541/8555 boards, TQM85xx support reworked:
...
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
(TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
If problems are detected with this non default CAS latency,
the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
-> TSEC is first device.
Patch by Stefan Roese, 30 Nov 2005
2005-11-30 13:06:40 +01:00
6e7fb6eaa5
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
...
Patch by John Otken, 23 Nov 2005
2005-11-29 18:18:21 +01:00
3d9569b232
Changed PPC44x startup message (cpu info, speed...) to common style:
...
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.
Patch by Stefan Roese, 27 Nov 2005
2005-11-27 19:36:26 +01:00
f08abe311b
Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
2005-11-25 16:38:03 +01:00
aa7cfc463a
Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
...
The COPYING file was extended to make clear that these files can be
used in non-GPL code, too.
2005-11-25 10:38:43 +01:00
5568e613ee
Add support for Prodrive P3P440 board:
...
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
2005-11-22 13:20:42 +01:00
fe126d8b34
Change all '$(...)' variable references into '${...}'
...
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
2005-11-20 21:40:11 +01:00
5a164c8ca9
Minor changes to init flags in TQM834x PCI.
2005-11-17 00:26:18 +01:00
3ca377638a
Add CHANGELOG entry
...
Patch by Stefan Roese, 15 Nov 2005
2005-11-15 16:26:34 +01:00
feaedfcf84
New PPC 405EP board added: CMS700
...
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
2005-11-15 10:35:59 +01:00
ea339205a9
Updated PCI mapping for esd CPCI2DP board.
...
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
2005-11-08 09:00:09 +01:00
527b5a511c
Fix MPC85xx PCI support (pci_register_hose() before pci config access)
...
Patch by Stefan Roese, 07 Nov 2005
2005-11-07 13:43:06 +01:00
182e10691f
Correct PPC Timebase register definitions (SPRN_TBRL...)
...
Patch by Stefan Roese, 07 Nov 2005
2005-11-07 09:57:57 +01:00
f190c11b1f
Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
...
Patch by Stefan Roese, 05 Nov 2005
2005-11-05 15:50:16 +01:00
ef04a0aa26
Additional fix for external IRQ config on Yellowstone & Yosemite
...
Patch by Stefan Roese, 03 Nov 2005
2005-11-03 08:31:33 +01:00
57275b69c6
Add support for Ocotea pass 3 with 440GX Rev. F
...
Patch by Stefan Roese, 01 Nov 2005
2005-11-01 10:08:03 +01:00
d9f2f5008c
Merge with /git/u-boot.git
2005-11-01 10:02:21 +01:00
be360d9824
More verbose CHANGELOG entry.
2005-10-29 23:50:20 +02:00
5d4ee51061
Merge with /home/m8/git/u-boot
2005-10-29 23:45:04 +02:00
99eb35dbbf
Add missing CHANGELOG entries.
2005-10-29 14:48:59 +02:00
e190290ba4
Fix external IRQ configuration on Yellowstone & Yosemite
...
The multiplexed signals Ext IRQ0...3 have to be configured as IRQ,
because they default to GPIOx (440EP/GR).
Patch by Stefan Roese, 28 Oct 2005
2005-10-28 12:21:06 +02:00
7b5cac0e19
Merge with /home/wd/git/u-boot/master
2005-10-21 22:41:25 +02:00
e9f1110051
Add missing 4xx board to MAKEALL
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:40:17 +02:00
a547775bac
Fix conflicting types (flash_write()) in esd auto_update.c
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:39:16 +02:00
c4c13df284
Fix problem with sleep in NetConsole (use get_timer())
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:36:44 +02:00
1e25f957c8
Add NetConsole Support for AMCC eval boards
...
Patch by Stefan Roese, 20 Oct 2005
2005-10-20 16:34:28 +02:00
a93316c5e9
Fix NetConsole support on 4xx (only print eth link on 1st transfer)
...
Patch by Stefan Roese, 18 Oct 2005
2005-10-18 19:17:12 +02:00
6902df56a0
Add PCI support for the TQM834x board.
2005-10-17 02:39:53 +02:00
326bf40fb7
Fix typo.
2005-10-17 00:24:00 +02:00
ea1fba136a
Merge with /home/sr/git/u-boot
2005-10-17 00:19:16 +02:00
20a374fe02
Add missing CHANGELOG entry.
2005-10-15 18:43:50 +02:00
3b6748ea0d
Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo
...
Patch by Stefan Roese, 14 Oct 2005
2005-10-14 15:37:34 +02:00
77ddac9480
Cleanup for GCC-4.x
2005-10-13 16:45:02 +02:00
17a8b276ba
Add documentation for Open Firmware Flat Tree and usage.
...
Patch by Pantelis Antoniou, 13 Oct 2005
2005-10-13 10:41:25 +02:00
814d98f24e
Add missing files for Pantelis Antoniou's patch
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:59:29 +02:00
cbdf8824fa
Merge with /home/sr/git/u-boot
2005-10-13 01:55:58 +02:00
070610c529
Add support for OF flat tree for the STXtc board.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:49:09 +02:00
f57f70aab9
Support passing of OF flat trees to the kernel.
...
Patch by Pantelis Antoniou, 04 Sep 2005
2005-10-13 01:45:54 +02:00
4f92ac3648
Fix problem in ppc4xx eth-driver without ethaddr (only without
...
CONFIG_NET_MULTI set)
Patch by Stefan Roese, 10 Oct 2005
2005-10-10 17:43:58 +02:00
3df5bea0b0
Add support for NetSilicon NS7520 processor.
...
Patch by Art Shipkowski, 12 May 2005
Cleanup.
2005-10-09 01:41:48 +02:00
7521af1c7d
Add support for AP1000 board.
...
Patch by James MacAulay, 07 Oct 2005
2005-10-09 01:04:33 +02:00
95f9dda216
Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
...
Patch by Anders Larsen, 07 Oct 2005
The Atmel errata #11 states that the transfer buffer descriptor
table must be aligned on a 16-word boundary. As it turned out, this
is insufficient - it seems the table must be aligned on a boundary
at least as large as the table itself (in Linux this is not an
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
2005-10-09 00:33:37 +02:00
47340a46f6
Fixed compilation for ARM when using a (standard) hard-FP toolchain
...
Patch by Anders Larsen, 07 Oct 2005
2005-10-09 00:25:58 +02:00
96782c63d3
Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
...
sed the linker scripts, rather than pre-process them.
Patch by Peter Pearse, 07 Oct 2005
2005-10-09 00:22:48 +02:00
c29ab9d71d
Fix gzip bmp support (test if malloc fails, warning when truncated).
...
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
2005-10-08 10:19:07 +02:00
87cb6862b9
Update make target for ARM supported boards.
...
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
2005-10-06 17:08:18 +02:00
bccae9039e
Fix booting from serial dataflash on AT91RM9200
...
Patch by Peter Menzebach, 29 Aug 2005
2005-10-06 01:50:50 +02:00
6ebc792114
Add JFFS2 support for TRAB board
...
Patch by Martin Krause, 25 Aug 2005
2005-10-06 01:46:57 +02:00
5ae31ee114
Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
...
Patch by Marcus Hall, 24 Aug 2005
2005-10-06 01:43:39 +02:00
f5c254d719
Fix the machine-id of the Cogent csb637 board
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:26:16 +02:00
78da60773c
Complete support for the KwikByte KB920x boards
...
Patch by Anders Larsen, 05 Oct 2005
2005-10-06 01:22:22 +02:00
c0e82d5016
Set the AT91RM9200 clock to asynchronous mode
...
Patch by Anders Larsen, 03 May 2005
2005-10-05 02:06:08 +02:00
3b9dfddfd8
Set the AT91RM9200 clock to synchronous mode
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:02:25 +02:00
645da51097
Add support for Cogent csb637
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 02:00:09 +02:00
fef636b0cf
Fix dm9161.c initialization
...
Patch by Anders Larsen, 29 Apr 2005
2005-10-05 01:54:04 +02:00
080bdb7f3a
* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
...
Patch by Anders Larsen, 29 Apr 2005
* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
(8e2be51de8
2005-10-05 01:51:29 +02:00
29ca46c445
Fix device partition intialization for SystemACE disks.
...
Patch by Stephen Williams, 28 Apr 2005
2005-10-05 00:25:17 +02:00
99b0d2851a
Added support for KwikByte KB920x boards (based on AT91RM9200)
...
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
2005-10-05 00:19:34 +02:00
45237bc00b
Add support for S29GL064M-R3 flash chip on xsengine board
...
Patch by Kurt Stremerch, 18 Apr 2005
2005-10-05 00:03:55 +02:00
7d314992a8
E500 update: repoint IVPR to RAM when code is relocated
...
Patch by Kylo Ginsberg, 13 Apr 2005
2005-10-05 00:00:54 +02:00
e5e98edd77
Fix loop end test in lib_generic/string.c:strswab()
...
Patch by Andrew Dyer, October 10, 2005
Signed-off-by: Andrew Dyer <amdyer@gmail.com>
2005-10-04 23:38:07 +02:00
9b880bd4d8
Update ARM Integrator boards:
...
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
2005-10-04 23:10:28 +02:00
1820d4c73b
Make sure only supported compiler options are used
...
Import "cc-option" shell function from kernel and
use it to get the correct ARM GCC options for individual CPUs
Patch by Peter Pearse, 30 Jun 2005
2005-10-04 22:38:24 +02:00
9a8d82fd3c
Fix 440GR to print correct cpu revision
...
Patch by Stefan Roese, 4 Oct 2005
2005-10-04 15:00:30 +02:00
d843a575d7
Merge with /home/wd/git/u-boot/master
2005-10-03 15:42:25 +02:00
93b17ec382
Change board message on AMCC Yosemite & Yellowstone to common style
...
Patch by Stefan Roese, 3 Oct 2005
2005-10-03 15:27:50 +02:00
d9631ecf52
Fix compiler warning
2005-09-30 15:18:23 +02:00
709d8ec0d8
Fix FEC PHY addresses for TQM85xx boards
2005-09-29 12:16:38 +02:00
e98f68be94
Fix uninitialized variable problem in hush shell
...
Patch by Lars Rostock, 26 Sep 2005
2005-09-28 01:49:47 +02:00
fb34a9a201
Undo change of f6e20fc6ca... to include/configs/trab.h
...
(Must have been an accident?)
2005-09-26 23:40:37 +02:00
d8e7e0f044
Add support for AT91RM9200 OHCI Controller.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:26:56 +02:00
98404649c8
Update ARM mach-types.h
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:18:22 +02:00
0e4018d244
Add support for MP2USB board.
...
Patch by Eric Benard, 07 Apr 2005
2005-09-26 01:14:38 +02:00
c570b2fdf5
Add board support for armadillo HT1070
...
Patch by Rowel Atienza, 06 Apr 2005
2005-09-26 01:06:33 +02:00
c2d0ab4da8
Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
...
Patch by Vitaly Bordug, 30 Mar 2005
2005-09-26 00:53:02 +02:00
e6f222815c
Add iopset command on mpc8xx
...
Patch by Daniel Eisenhut, 25 Mar 2005
2005-09-26 00:44:15 +02:00
a912733e9b
Add support for MII in eepro100 driver.
...
Patch by Gleb Natapov, 21 Mar 2005
2005-09-26 00:39:59 +02:00
f2af3eb55e
Fixes to the Lubbock (PXA 25x) support:
...
- Resolve the FIXME with respect to saving the u-boot environment.
- Make the default load address land in real memory.
- Fix lan91c96 SMC_{in,out}{b,w,l}() macros
Patch by David Brownell, 10 Mar 2005
2005-09-26 00:29:53 +02:00
8e6f1a8ec2
Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
...
Patch by Marc Leeman, 04 Mar 2005
2005-09-25 18:59:36 +02:00
716c1dcb41
Cleanup
2005-09-25 18:49:35 +02:00
49a7581c6c
OMAP242x H4 board update
...
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
2005-09-25 18:41:04 +02:00
8e2be51de8
Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
...
Patch by Steven Scholz, 02 Mar 2005
2005-09-25 17:14:20 +02:00
a188b5854f
Fix typo in eth.c
...
Patch by Ara Avanesyan, 24 Feb 2005
2005-09-25 17:05:57 +02:00
31466294b0
Remove unneeded #include <malloc.h>
...
Patch by Ladislav Michl, 22 Feb 2005
2005-09-25 17:02:27 +02:00
b66eb5282d
Add cramfs support for m68k
...
Patch by Zachary Landau, 21 Feb 2005
2005-09-25 16:59:36 +02:00
bd51626c8d
Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
...
Patch by Jeff Angielski, 21 Feb 2005
2005-09-25 16:56:15 +02:00
7a22cd535b
Fix au1x00_serial baud rate calculation:
...
remove hardcoded cpu clock divisor and use register instead;
round up instead of truncate
Patch by Andrew Dyer, 15 Feb 2005
2005-09-25 16:50:33 +02:00
875c78934e
Add Xilinx Spartan3 family FPGA support
...
Patch by Kurt Stremerch, 14 February 2005
2005-09-25 16:44:21 +02:00
db421e6451
Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
...
Patch by Zachary Landau, 11 Feb 2005
2005-09-25 16:41:22 +02:00
c177bb5f6c
Fix VOH405 Support
...
Patch by Matthias Fuchs, 25 Sep 2005
2005-09-25 16:31:16 +02:00
1972dc0a9e
Added support for PCI bridge on MPC8272ADS
...
Patch by Vitaly Bordug, Feb 09 2005
2005-09-25 16:27:55 +02:00
0148e8cb43
Update multicore CM9XX support for Integrator AP to allow booting from flash
...
Patch by Jean-Paul Saman, 8 Feb 2005
2005-09-25 16:22:14 +02:00
389db1f113
Fix strswab() to reliably find end of string
...
Patch by Andrew Dyer, 08 Feb 2005
2005-09-25 16:15:17 +02:00
6ed6ce62be
Fix typos in include/ppc440.h
...
Patch by Andrew E Mileski, 04 Feb 2005
2005-09-25 16:01:42 +02:00
2df741bf7c
Add Vibren (was Accelent) PXA255 IDP Support
...
Patch by Cliff Brake, 04 Feb 2005
2005-09-25 15:57:49 +02:00
fd4bb67bd2
Fix tools/bmp_logo.c using incorrect offset to pixel data
...
Patch by Andrew Dyer, 31 Jan 2005
2005-09-25 15:39:00 +02:00
74f4304ee7
Add ARM946E cpu and core module targets; remap memory to 0x00000000
...
Patch by Peter Pearse, 2 Feb 2005
2005-09-25 01:48:28 +02:00
e2146b6aea
Fix error handling in tools/env/fw_env.c
...
Patch by Ara Avanesyan, 01 Feb 2005
2005-09-25 01:20:38 +02:00
9f221d0738
Fix MGT5100 PSC baudrate calculation
...
Patch by Sebastian Schau, 27 Jan 2005
2005-09-25 01:09:58 +02:00
c97a2aaf27
OMAP242x fix for GP device booting
...
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
2005-09-25 00:59:24 +02:00
265817c7e6
Add support for AMD's Pb1x00 eval board;
...
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
b63de2c053
Update omap5912osk board:
...
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
2005-09-25 00:23:05 +02:00
3706ba1a36
Fix warnings for PCI code on ixp
...
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
9a9200b4a7
virtex2 fix for bogus download error messages
...
The virtex2 FPGA download code watches for init going active during
a download of config data as an error condition. init also goes
active after a configuration is finished in concert with the done
signal. So far, the code does not check for done active until all
of the configuration data is sent. If configuration data has a few
extra pad bytes at the end, this would cause an error message even
though the download had suceeded.
NOTE: virtex2 slave serial and spartan2 versions may still have the
same problem.
Patch by Andrew Dyer, 12 Jan 2005
2005-09-24 23:41:00 +02:00
dafbe3790e
Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
...
Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
message when probing for nonexistent flash in little endian mode.
As a side effect more efficient and smaller code is generated,
which is always a Good Thing (TM).
Patch by Ladislav Michl, 24 Sep 2005
2005-09-24 23:32:48 +02:00
28cb937584
Update for TFTP using a fixed UDP port
...
Use the approved environment variable names. Added "tftpdstp" to
allow ports other than 69 per Tolunay Orkun's recommendation.
Patch by Jerry Van Baren, 12 Jan 2005
2005-09-24 23:25:46 +02:00
ecb0ccd9c2
Allow to force TFTP to use a fixed UDP port
...
(Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpport)
Patch by Jerry Van Baren, 10 Jan 2005
2005-09-24 22:37:32 +02:00
4bc12f1ccf
Fix ethernet timeouts on dbau1550 and other au1x00 systems
...
Patch by Leif Lindholm, 29 Dec 2004
2005-09-24 22:05:40 +02:00
2b792afcc5
* Fix PHY address argument passing with mii info command
...
Patch by Andrew Dyer, 28 Dec 2004
* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
0c8721a466
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
a6e6cf0036
Merge with /home/wd/git/u-boot/work
2005-09-22 09:46:19 +02:00
1caa70788c
Cleanup - update CHANGELOG, undo test settings
2005-09-22 09:34:17 +02:00
7644f16f6b
esd CPCI2DP board added
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
026cb5d864
esd PMC405 board updated
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:07:15 +02:00
98f4a3dfcb
Add SM501 support to HH405 board.
...
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
2005-09-22 09:04:17 +02:00
8b4c9e7c14
Fix bug in auto_update (trab board)
...
Patch by Martin Krause, 16 Sep 2005
2005-09-21 15:31:25 +02:00
59d80bf180
Fix computation of framebuffer palette for 8bpp LCD bitmaps
...
Patch by Francesco Mandracci, 16 Sep 2005
2005-09-21 15:24:52 +02:00
1806c75959
Update configuration for INKA4x0 board
2005-09-21 10:07:56 +02:00
29fe1c0fa4
Update configuration for PM854 board
...
Based on patch by R. Loeffl, 20 Jul 2005
2005-09-21 09:59:55 +02:00
053b40fa0c
Add PCI support to TQM8540 and TQM8560 boards
...
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 14:41:11 +02:00
34c0a5e98b
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 11:34:07 +02:00
3edb0ccf61
Merge with /home/wd/git/u-boot/master
2005-09-14 17:06:43 +02:00
47278471f9
Merge with /home/sr/git/u-boot
2005-09-14 16:59:18 +02:00
e1b7296126
Add support for mtddevnum and mtddevname variables (mtdparts command)
...
[Merge with /home/m8/git/u-boot]
2005-09-13 00:20:45 +02:00
670d9f132d
Change default console baud rate for stxxtc board
2005-09-13 00:12:33 +02:00
7d45477bfa
Added support for mtddevnum and mtddevname variables (mtdparts command)
2005-09-11 15:27:12 +02:00
4a3cd9e655
Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
...
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
2005-09-07 16:21:12 +02:00
5d244ea128
Merge with /home/sr/git/u-boot:
...
Add I2C support for TQM85xx
2005-09-06 22:17:16 +02:00
80e238c7f0
Fix default command set (don't include CFG_CMD_DISPLAY command)
...
Patch by Pantelis Antoniou, 02 Sep 2005
2005-09-03 02:22:41 +02:00
6d51e505ad
Cleanup compiler warnings.
2005-09-03 01:58:35 +02:00
7b3e3c5954
Update CHANGELOG.
2005-09-03 01:23:25 +02:00
9d2a873bdf
Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
...
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
77f6580cc0
Update CHANGELOG file
2005-08-31 12:30:09 +02:00
61dada83f3
Minor reformatting
2005-08-24 12:41:18 +02:00
a3e4fcb860
Fixed bamboo port to enable running without DDR-DIMM (bamboo has also 64MB onboard DDR)
...
Patch by Stefan Roese, 24 Aug 2005
2005-08-24 11:21:36 +02:00
a9fe9f427d
Update CHANGELOG
2005-08-23 23:04:40 +02:00
2ac4785c2f
Fix make dependencies for at91rm9200 and ks8695 cpus
...
Patch by Steven Scholz, 23 Aug 2005
2005-08-23 22:29:44 +02:00
d534f5cc38
Add JFFS2 support for TQM5200 board
2005-08-23 22:27:41 +02:00
5e4b3361bc
Add esd cpci5200 and pf5200 boards
...
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00
94085698d0
Fix sysclock for TQM8540 and TQM8560 boards
...
Patch by Martin Krause, 25 Jul 2005
2005-08-19 00:55:12 +02:00
c7db9a3805
Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
...
Patch by Martin Krause, 08 Jun 2005
2005-08-19 00:53:02 +02:00
6617aae9b9
Add new board specific commands for TQM5200/STK52XX
...
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
2005-08-19 00:46:54 +02:00
df3c7c8f52
Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
...
because of a bug in the AT91RM9200 CPU PLL
Patch by Martin Krause, 22 Apr 2005
2005-08-19 00:36:45 +02:00
601aed1e8f
Add automatic HW detection for another CMC_PU2 variant
...
Patch by Martin Krause, 20 Apr 2005
2005-08-19 00:08:55 +02:00
dbc5819098
Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
...
Patch by Martin Krause, 19 Apr 2005
2005-08-18 12:21:16 +02:00
e8aa824eb2
Fix initialization problem on TQM5200 without SM501
...
Patch by Martin Krause, 8 Apr. 2005
2005-08-18 11:55:22 +02:00
4f562f145a
Add RTC support for STK52XX.200
...
Patch by Martin Krause, 7 Apr. 2005
2005-08-18 11:51:12 +02:00
df04a3df33
Add CHANEGLOG entry; sort Makefile entries
2005-08-18 01:22:22 +02:00
05b47540aa
Merge with testing-NAND (Rewrite of NAND code)
2005-08-17 12:57:49 +02:00
932394ac43
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
...
Patch by Ladislav Michl, 29 Jun 2005
2005-08-17 12:55:25 +02:00
98128f389c
Enable PCI on hmi1001 board
2005-08-16 15:17:53 +02:00
87b8bd5aed
Fix return values of the jffs2 commands ls/fsload/fsinfo,
...
so we can use them to, e.g., check the existence of a file with
"if ls foo; then this; else that; fi" in the hush shell
Patch by Andreas Engel, 16 August 2005
2005-08-16 09:32:45 +02:00
3d078ce6d7
Coding style cleanup
2005-08-15 16:03:56 +02:00
6bdf430660
Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
...
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
2005-08-15 15:55:00 +02:00
b79316f2a2
Add Sandburst Metrobox and Sandburst Karef board support packages.
...
Second serial port on 440GX now defined as a system device.
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
Patch by Travis B. Sawyer, 12 Jul 2005
Check return value of malloc in 440gx_enet.c
Patch by Travis B. Sawyer, 18 Jul 2005
2005-08-15 12:31:23 +02:00
b2f508075c
Minor code cleanup
2005-08-12 23:43:12 +02:00
50814844e4
Add forgotten new fils from latest VoiceBlue update
2005-08-12 23:36:08 +02:00
396387ab8d
Make bootretry feature work with hush shell.
...
Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
Patch by Andreas Engel, 19 Jul 2005
2005-08-12 23:34:51 +02:00
d992daf99d
Update Hymod Board Database PHP code in "tools" directory
...
Patch by Murray Jensen, 01 Jul 2005
2005-08-12 23:27:18 +02:00
f9d77ed380
Make "tr" command use POSIX compliant; export HOSTOS make variable
...
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:23:46 +02:00
b3b0fd552e
Fix Murray Jensen's mail address.
...
Patch by Murray Jensen, 30 Jun 2005
2005-08-12 23:20:59 +02:00
f89920c3e4
Preserve PHY_BMCR during a soft reset.
...
Patch by Carl Riechers, 24 Jun 2005
2005-08-12 23:15:53 +02:00
e544528831
VoiceBlue update: eeprom tool can also store firmware version now.
...
eeprom.bin is runable by jumping at load address.
Patch by Ladislav Michl, 23 May 2005
2005-08-12 22:56:51 +02:00
ea99a73881
Move the AT91RM9200DK to the ARM Systems list.
...
Patch by Anders Larsen, 26 Apr 2005
2005-08-12 22:38:37 +02:00
8d4ba3da5e
Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
...
Patch by Anders Larsen, 26 Apr 2005
2005-08-12 22:35:59 +02:00
4d302d69c8
measure_gclk() is needed when DEBUG is enabled
...
Patch by Bryan O'Donoghue, 25 Apr 2005
2005-08-12 22:32:29 +02:00
8534bf9ac0
Add UPD-Checksum code, fix problem in net.c (return instead of break)
...
Patch by Reinhard Arlt, 12 Aug 2005
2005-08-12 20:06:52 +02:00
5315dfa9d1
esd PCI405 board updated
...
Patch by Matthias Fuchs, 28 Jul 2005
2005-08-12 16:56:56 +02:00
82f4c6ac84
esd WUH405 and DU405 board updated
...
Patch by Matthias Fuchs, 27 Jul 2005
2005-08-12 16:52:47 +02:00
9bcf2ab41f
Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
...
Patch by Matthias Fuchs, 4 May 2005
2005-08-12 16:46:35 +02:00
dafba16e6f
Merge with /home/wd/git/u-boot/master
2005-08-12 00:22:49 +02:00
84286386a8
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 18:03:14 +02:00
9e00589bdd
Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
...
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 17:58:40 +02:00
c57c7980ff
Add NAND FLASH support for AMCC Bamboo 440EP eval board
...
Patch by Stefan Roese, 11 Aug 2005
2005-08-11 17:56:56 +02:00
8f79e4c2da
Add configuration for IFM AEV FIFO board.
...
Minor coding style cleanup.
2005-08-10 15:14:32 +02:00
9d3338d2b9
Fix CompactFlash problem on HMI1001 board
2005-08-10 10:06:25 +02:00
c4e0e68604
Make new "mtdparts" code build with older compilers
...
Patch by Andrea Scian, 09 Aug 2005
2005-08-09 21:41:20 +02:00
38ec37d0f1
Merge with /home/wd/git/u-boot/master
2005-08-09 17:38:59 +02:00
c19c313479
Fix compiler warnings with older GCC versions
2005-08-09 17:25:22 +02:00
846b0dd2dc
Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux)
...
Patch by Stefan Roese, 08 Aug 2005
2005-08-08 12:42:22 +02:00
700a0c648d
Add common (with Linux) MTD partition scheme and "mtdparts" command
...
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
452e8e72ad
Fix build problems for PM856 Board
2005-08-08 00:47:14 +02:00
8b019da650
Fix sign extension bug in 'fpga loadb' command;
...
make 'fpga loadb' always print the file header info
Patch by Andrew Dyer, 11 Jan 2005
2005-08-08 00:14:41 +02:00
fe599e17ed
Fix errors that occur when accessing SystemACE CF
...
Patch by Jeff Angielski, 09 Jan 2005
2005-08-07 23:55:50 +02:00
7ebdb19b39
Document switching between U-Boot and PlanetCore on RPXlite
...
by Sam Song, 24 Dec 2004
2005-08-06 02:11:33 +02:00
Wolfgang Denk