Jens Scharsig c041e9d212 new at91_emac network driver (NET_MULTI api) ... * add's at91_emac (AT91RM9200) network driver (NET_MULTI api) * enable driver with CONFIG_DRIVER_AT91EMAC * generic PHY initialization * modify AT91RM9200 boards to use NET_MULTI driver * the drivers has been tested with LXT971 Phy and DM9161 Phy at MII and RMII interface Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>		2010-01-31 22:37:12 -08:00
..
manroland	mpc52xx, manroland: add some commands	2009-12-07 22:50:41 +01:00
A3000.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ADCIOP.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ADNPESC1.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
ADNPESC1_base_32.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ADS860.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
AMX860.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
AP1000.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
APC405.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
AR405.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
ASH405.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
ATUM8548.h	ppc/85xx: Clean up ATUM8548 PCI setup code	2010-01-05 13:49:06 -06:00
Adder.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
AdderUSB.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
Alaska8220.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
AmigaOneG3SE.h	stdio/device: rework function naming convention	2009-07-18 00:27:46 +02:00
B2.h	Net: Clean up LAN91C96 Support	2009-12-14 16:42:03 -08:00
BAB7xx.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
BC3450.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
BMW.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
CANBT.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
CATcenter.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
CCM.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
CMS700.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
CPC45.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
CPCI2DP.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	2009-01-26 10:40:42 +01:00
CPCI405.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
CPCI405AB.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
CPCI405DT.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
CPCI750.h	74xx_7xx: CPCI750: Add CPCI adapter/target support	2009-06-12 20:47:18 +02:00
CPCI4052.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
CPCIISER4.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
CPU86.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
CPU87.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
CRAYL1.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
CU824.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
DASA_SIM.h	ppc4xx: Update TEXT_BASE for DASA_SIM boards	2009-03-20 22:39:13 +01:00
DB64360.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
DB64460.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
DK1C20.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
DK1C20_safe_32.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
DK1C20_standard_32.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
DK1S10.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
DK1S10_mtx_ldk_20.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
DK1S10_safe_32.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
DK1S10_standard_32.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
DP405.h	4xx: Remove binary cpld bitstream from DP405 board	2009-06-12 20:39:47 +02:00
DU405.h	i2c: Remove deprecated individual i2c commands	2009-06-12 20:39:46 +02:00
DU440.h	ppc4xx: Consolidate pci_target_init() function	2009-11-19 11:35:08 +01:00
EB+MCF-EV123.h	update the EB+MCF-EV123 board support	2009-07-26 13:19:23 +02:00
ELPPC.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
ELPT860.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
EP1C20.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
EP1S10.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
EP1S40.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
EP88x.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ERIC.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
ESTEEM192E.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ETX094.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
EVB64260.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
EXBITGEN.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
FADS823.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
FADS850SAR.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
FADS860T.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
FLAGADM.h	8xx, icache: enabling ICache not before running from RAM	2009-03-18 20:48:29 +01:00
FPS850L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
FPS860L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
G2000.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
GEN860T.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
GENIETV.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
GTH.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
HH405.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
HIDDEN_DRAGON.h	remove _IO_BASE and KSEG1ADDR from board configuration files	2009-07-11 00:19:16 +02:00
HMI10.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
HUB405.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
IAD210.h	boards: move board_get_enetaddr() into board-specific init	2009-03-20 22:39:12 +01:00
ICU862.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
IDS8247.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
IP860.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
IPHASE4539.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ISPAN.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
IVML24.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
IVMS8.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
IceCube.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
JSE.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
KAREF.h	Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC	2008-11-09 21:38:04 -08:00
KUP4K.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
KUP4X.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
LANTEC.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
M5208EVBE.h	ColdFire: Add M5208EVB and MCF520x CPU support	2009-07-14 09:27:17 -05:00
M5235EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M5249EVB.h	ColdFire: Modules header files cleanup	2008-11-03 09:45:58 -07:00
M5253DEMO.h	remove _IO_BASE and KSEG1ADDR from board configuration files	2009-07-11 00:19:16 +02:00
M5253EVBE.h	remove _IO_BASE and KSEG1ADDR from board configuration files	2009-07-11 00:19:16 +02:00
M5271EVB.h	Coldfire: M5271EVB: Board header update (dependencies)	2009-02-06 14:54:47 -07:00
M5272C3.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M5275EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M5282EVB.h	ColdFire: Modules header files cleanup	2008-11-03 09:45:58 -07:00
M5329EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M5373EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M5475EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M5485EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M52277EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M53017EVB.h	ColdFire: Update bootargs	2009-07-14 09:46:42 -05:00
M54451EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
M54455EVB.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
MBX.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
MBX860T.h	ppc: cleanup compiler errors/warnings	2009-03-27 20:23:32 +01:00
METROBOX.h	Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC	2008-11-09 21:38:04 -08:00
MHPC.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
MIP405.h	Merge branch 'master' of git://git.denx.de/u-boot-nand-flash	2009-07-19 00:38:23 +02:00
ML2.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
MOUSSE.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
MPC86xADS.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
MPC832XEMDS.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
MPC837XEMDS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC837XERDB.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC885ADS.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
MPC8260ADS.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
MPC8266ADS.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
MPC8313ERDB.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8315ERDB.h	mpc83xx: Add NAND boot support for MPC8315E-RDB boards	2010-01-07 18:33:52 -06:00
MPC8323ERDB.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
MPC8349EMDS.h	mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields	2009-09-26 21:19:38 -05:00
MPC8349ITX.h	mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields	2009-09-26 21:19:38 -05:00
MPC8360EMDS.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
MPC8360ERDK.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
MPC8536DS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8540ADS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8540EVAL.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
MPC8541CDS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8544DS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8548CDS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8555CDS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8560ADS.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8568MDS.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
MPC8569MDS.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
MPC8572DS.h	ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START	2010-01-05 13:49:08 -06:00
MPC8610HPCD.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MPC8641HPCN.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
MUSENKI.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
MVBC_P.h	Remove deprecated 'autoscr' command/variables	2009-09-22 23:03:24 +02:00
MVBLM7.h	mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields	2009-09-26 21:19:38 -05:00
MVBLUE.h	MVBLUE: Remove CONFIG_CMD_IRQ	2009-12-14 21:31:17 +01:00
MVS1.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
MigoR.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
NC650.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
NETPHONE.h	Fix boards broken after removal of legacy NAND and DoC support	2009-07-19 19:37:24 +02:00
NETTA.h	Fix boards broken after removal of legacy NAND and DoC support	2009-07-19 19:37:24 +02:00
NETTA2.h	Fix boards broken after removal of legacy NAND and DoC support	2009-07-19 19:37:24 +02:00
NETVIA.h	Fix boards broken after removal of legacy NAND and DoC support	2009-07-19 19:37:24 +02:00
NSCU.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
NX823.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
OCRTC.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
ORSG.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
OXC.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
P1_P2_RDB.h	85xx/p1_p2_rdb: enable hwconfig	2010-01-25 22:14:40 -06:00
P3G4.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
P2020DS.h	ppc/85xx: Remove CONFIG_SYS_DDR_TLB_START	2010-01-05 13:49:08 -06:00
PATI.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
PCI405.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	2009-01-26 10:40:42 +01:00
PCI5441.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
PCIPPC2.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
PCIPPC6.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
PIP405.h	Merge branch 'master' of git://git.denx.de/u-boot-nand-flash	2009-07-19 00:38:23 +02:00
PK1C20.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
PLU405.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
PM520.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
PM826.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
PM828.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
PM854.h	8xxx: Break out DMA code to a common file	2009-07-01 23:01:51 -05:00
PM856.h	8xxx: Break out DMA code to a common file	2009-07-01 23:01:51 -05:00
PMC405.h	ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards	2009-09-10 14:38:17 +02:00
PMC405DE.h	ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards	2009-09-10 14:38:17 +02:00
PMC440.h	ppc4xx: Remove unused features from PMC440 board support	2009-11-19 11:39:43 +01:00
PN62.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
PPChameleonEVB.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
QS823.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
QS850.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
QS860T.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
R360MPI.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
RBC823.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
RPXClassic.h	boards: move board_get_enetaddr() into board-specific init	2009-03-20 22:39:12 +01:00
RPXlite.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
RPXlite_DW.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
RPXsuper.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
RRvision.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
Rattler.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
SBC8540.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
SCM.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
SIMPC8313.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
SL8245.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
SM850.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
SMN42.h	arm: cleanup remaining CONFIG_INIT_CRITICAL	2009-06-12 20:39:48 +02:00
SPD823TS.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
SX1.h	arm925t: Fix CONFIG_SYS_HZ to 1000	2009-04-29 21:39:46 +02:00
SXNI855T.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
Sandpoint8240.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
Sandpoint8245.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
TASREG.h	ColdFire: Modules header files cleanup	2008-11-03 09:45:58 -07:00
TB5200.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
TK885D.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TOP860.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
TOP5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
TQM85xx.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
TQM823L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM823M.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM834x.h	mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields	2009-09-26 21:19:38 -05:00
TQM850L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM850M.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM855L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM855M.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM860L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM860M.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM862L.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM862M.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM866M.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM885D.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
TQM5200.h	tqm5200: Correct comment and code in post_hotkeys_pressed.	2009-10-08 00:31:23 +02:00
TQM8260.h	TQM8260: fix locations of kernel and ramdisk images in flash	2009-02-17 10:26:38 +01:00
TQM8272.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
Total5200.h	mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c	2009-03-18 20:54:56 +01:00
VCMA9.h	Add a unified s3c24x0 header file	2009-11-27 16:26:13 -06:00
VOH405.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
VOM405.h	4xx: Remove binary cpld bitstream from VOM405 board	2009-06-12 20:39:46 +02:00
VoVPN-GW.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
W7OLMC.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
W7OLMG.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
WUH405.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
XPEDITE1000.h	xpedite1k: Move to X-ES vendor directory	2009-07-24 06:42:32 +02:00
XPEDITE5170.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
XPEDITE5200.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
XPEDITE5370.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
Yukon8220.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ZPC1900.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
ZUMA.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
a320evb.h	arm: A320: Add support for Faraday A320 evaluation board	2009-11-27 16:26:17 -06:00
acadia.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
actux1.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	2009-03-29 16:04:51 +02:00
actux2.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	2009-03-29 16:04:51 +02:00
actux3.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	2009-03-29 16:04:51 +02:00
actux4.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	2009-03-29 16:04:51 +02:00
aev.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
afeb9260.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
alpr.h	ppc4xx: alpr: Remove some not needed commands to make image fit again	2009-12-22 05:53:00 +01:00
amcc-common.h	ppc4xx: Update flash size in reg property of the NOR flash node	2009-10-23 15:56:32 +02:00
ap325rxa.h	Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API	2009-07-22 22:53:44 -07:00
apollon.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
aria.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
armadillo.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
assabet.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
at91cap9adk.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
at91rm9200dk.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
at91rm9200ek.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
at91sam9m10g45ek.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
at91sam9rlek.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
at91sam9260ek.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
at91sam9261ek.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
at91sam9263ek.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
atc.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
atngw100.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
atstk1002.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
atstk1003.h	Merge branch 'fixes' into cleanups	2008-12-17 16:53:07 +01:00
atstk1004.h	Merge branch 'fixes' into cleanups	2008-12-17 16:53:07 +01:00
atstk1006.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
bamboo.h	NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS	2009-01-23 10:32:51 -06:00
barco.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
bf518f-ezbrd.h	Blackfin: bf518f-ezbrd: increase monitor length	2010-01-17 09:17:27 -05:00
bf526-ezbrd.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bf527-ezkit.h	Blackfin: add support for BF527-EZKIT v2.1	2010-01-17 09:17:27 -05:00
bf533-ezkit.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
bf533-stamp.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bf537-minotaur.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bf537-pnav.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bf537-srv1.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bf537-stamp.h	Blackfin: bf537-stamp: rename SPI/MMC define	2010-01-17 09:17:26 -05:00
bf538f-ezkit.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bf548-ezkit.h	Blackfin: convert bfin_sdh to generic mmc	2010-01-17 09:17:27 -05:00
bf561-acvilon.h	Blackfin: bf561-acvilon: new board port	2010-01-17 09:17:26 -05:00
bf561-ezkit.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
bfin_adi_common.h	Blackfin: add support for kgdb	2010-01-17 20:36:09 -05:00
blackstamp.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
bubinga.h	i2c: Update references to individual i2c commands	2009-06-12 20:39:46 +02:00
c2mon.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
canmb.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
canyonlands.h	ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)	2009-11-09 13:30:19 +01:00
cerf250.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
cm-bf527.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
cm-bf533.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
cm-bf537e.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
cm-bf537u.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
cm-bf548.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
cm-bf561.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
cm41xx.h	ks8695: move serial driver to drivers/serial	2009-03-29 23:01:42 +02:00
cm4008.h	ks8695: move serial driver to drivers/serial	2009-03-29 23:01:42 +02:00
cm5200.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
cmc_pu2.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
cmi_mpc5xx.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
cobra5272.h	unify {CONFIG_,}ENV_IS_EMBEDDED	2009-08-25 12:57:54 +02:00
cogent_common.h	…
cogent_mpc8xx.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
cogent_mpc8260.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
cpci5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
cpu9260.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
cpuat91.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
cradle.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
csb226.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
csb272.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
csb472.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
csb637.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
da830evm.h	DA830: Add usb config	2010-01-09 10:25:07 +01:00
davinci_dm355evm.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_dm355leopard.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_dm365evm.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_dm6467evm.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_dvevm.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_schmoogie.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_sffsdr.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
davinci_sonata.h	Davinci: Configurable NAND chip selects	2010-01-04 08:48:17 -06:00
dbau1x00.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
debris.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
delta.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
devkit8000.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
digsy_mtc.h	digsy_mtc: Add TCR register value for RTC (DS1339)	2009-09-24 00:21:06 +02:00
dlvision.h	ppc4xx: Add DL-Vision 405EP board support	2009-07-24 06:42:31 +02:00
dnp1110.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
eNET.h	i386: Final Relocation	2009-12-05 01:05:39 +01:00
eXalion.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
ebony.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ep82xxm.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
ep7312.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
ep8248.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
ep8260.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
espt.h	sh: Add support ESPT-GIGA borad	2009-07-11 09:02:21 +09:00
evb4510.h	arm: clean cache management	2009-04-05 13:06:31 +02:00
favr-32-ezkit.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
fx12mm.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
galaxy5200.h	galaxy5200: Add default environment variables	2009-10-28 21:46:21 +01:00
gcplus.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
gdppc440etx.h	ppc4xx: Add GDsys PowerPC 440 ETX board support.	2009-01-26 10:13:30 +01:00
gr_cpci_ax2000.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
gr_ep2s60.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
grsim.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
grsim_leon2.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
gth2.h	Add "source" command; prepare removal of "autoscr" command	2009-04-03 22:01:42 +02:00
gw8260.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h	…
hammerhead.h	Merge branch 'fixes' into cleanups	2008-12-17 16:53:07 +01:00
hcu4.h	ppc4xx: Update configs for Netstal boards	2008-10-21 17:34:57 +02:00
hcu5.h	ppc4xx: Update configs for Netstal boards	2008-10-21 17:34:57 +02:00
hermes.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
hmi1001.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
hymod.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
ibf-dsp561.h	Blackfin: tweak embedded LDR env config option	2010-01-17 09:17:26 -05:00
idmr.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
impa7.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
imx27lite.h	Merge branch 'next' of ../next	2009-12-15 23:38:34 +01:00
imx31_litekit.h	Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API	2009-07-22 22:53:44 -07:00
imx31_phycore.h	Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API	2009-07-22 22:53:44 -07:00
incaip.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
inka4x0.h	ppc: Remove board-specific command table relocation fixups	2009-10-03 10:17:56 +02:00
innokom.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
integratorap.h	integratorap/cp: use cfi driver	2009-06-23 00:10:04 +02:00
integratorcp.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
intip.h	ppc4xx: Make DDR2 timing for intip more robust	2009-09-23 15:46:02 +02:00
ipek01.h	mpc52xx: add support for the IPEK01 board	2009-10-31 16:14:35 +01:00
ixdp425.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	2009-03-29 16:04:51 +02:00
ixdpg425.h	arm: timer and interrupt init rework	2009-06-12 20:39:48 +02:00
jupiter.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
katmai.h	ppc4xx: Katmai: Add chip_config command	2009-11-10 15:09:37 +01:00
kb9202.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
keymile-common.h	powerpc: keymile boards updates	2010-01-18 00:43:54 +01:00
kilauea.h	ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration	2010-01-23 09:27:28 +01:00
km8xx.h	powerpc: updates for the keymile boards	2009-07-21 00:06:11 +02:00
kmeter1.h	83xx, uec: split enet_interface in two variables	2010-01-31 22:37:12 -08:00
kmsupx4.h	8xx: add support for new keymile kmsupx4 board.	2009-03-18 20:50:05 +01:00
korat.h	ppc4xx: Consolidate pci_pre_init() function	2009-11-19 11:35:30 +01:00
kvme080.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
lart.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
linkstation.h	FDT: remove obsolete OF_CPU and OF_SOC macros.	2009-09-22 22:59:27 +02:00
logodl.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
lpc2292sodimm.h	arm: cleanup remaining CONFIG_INIT_CRITICAL	2009-06-12 20:39:48 +02:00
lpd7a400-10.h	Fix SMC91111 regression: lpd7a40x build failures	2009-11-09 21:56:18 -08:00
lpd7a400.h	lh7a40x: move serial driver to drivers/serial	2009-06-12 20:39:53 +02:00
lpd7a404-10.h	Fix SMC91111 regression: lpd7a40x build failures	2009-11-09 21:56:18 -08:00
lpd7a404.h	Fix SMC91111 regression: lpd7a40x build failures	2009-11-09 21:56:18 -08:00
luan.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
lubbock.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
lwmon.h	ppc: Clean up calling of misc_init_r() during init	2009-09-22 23:04:44 +02:00
lwmon5.h	video: mb862xx: add option VIDEO_FB_16BPP_WORD_SWAP for IPEK01	2009-10-31 12:17:40 +01:00
m501sk.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
makalu.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
mcc200.h	mcc200: fix build error	2009-10-19 09:18:57 +02:00
mcu25.h	ppc4xx: Update configs for Netstal boards	2008-10-21 17:34:57 +02:00
mecp5123.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
mecp5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
meesc.h	at91: Enable slow master clock on meesc board	2010-01-23 08:15:50 -06:00
mgcoge.h	FDT: remove obsolete OF_CPU and OF_SOC macros.	2009-09-22 22:59:27 +02:00
mgsuvd.h	8xx, mgsuvd: rename board to a more generic name	2009-03-18 20:50:04 +01:00
microblaze-generic.h	microblaze: Stop stack clobbering in microblaze-generic.	2009-12-08 08:51:42 +01:00
mimc200.h	MIMC200: set default fbmem value	2009-11-22 22:07:17 +01:00
ml300.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
ml507.h	ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg	2008-10-31 10:31:02 +01:00
modnet50.h	netarm: move serial driver to drivers/serial	2009-03-29 23:01:41 +02:00
motionpro.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
mp2usb.h	new at91_emac network driver (NET_MULTI api)	2010-01-31 22:37:12 -08:00
mpc5121ads.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
mpc7448hpc2.h	FDT: remove obsolete OF_CPU and OF_SOC macros.	2009-09-22 22:59:27 +02:00
mpr2.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	2009-07-08 11:43:16 +09:00
ms7720se.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	2009-07-08 11:43:16 +09:00
ms7722se.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
ms7750se.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	2009-07-08 11:43:16 +09:00
muas3001.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
mucmc52.h	mpc5200, mucmc52, uc101: config cleanup	2009-09-25 01:19:17 +02:00
munices.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
mv88f6281gtw_ge.h	Marvell MV88F6281GTW_GE Board support	2009-07-18 20:41:42 +02:00
mx1ads.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
mx1fs2.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
mx31ads.h	Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API	2009-08-25 13:35:54 -07:00
mx31pdk.h	MX31: Activate NAND environment on i.MX31 PDK board.	2010-01-19 17:08:13 -06:00
neo.h	ppc4xx: Add GDSys neo 405EP board support	2008-10-21 17:35:02 +02:00
netstal-common.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
netstar.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
nhk8815.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
ns9750dev.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	2009-03-29 16:04:51 +02:00
o2dnt.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
ocotea.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
omap3_beagle.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap3_evm.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap3_overo.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap3_pandora.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap3_sdp3430.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap3_zoom1.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap3_zoom2.h	OMAP3 zoom2 Use usbtty if the debug board is not connected.	2009-12-20 12:51:51 +01:00
omap730.h	ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h	2008-09-12 02:20:40 +02:00
omap730p2.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
omap1510.h	ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h	2008-09-12 02:20:40 +02:00
omap1510inn.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
omap1610h2.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
omap1610inn.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
omap2420h4.h	Remove superfluous uses of V_PROMPT macro.	2010-01-04 08:48:16 -06:00
omap5912osk.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
openrd_base.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
p3mx.h	p3mx: Remove serial relocation fixups	2009-10-03 10:17:57 +02:00
p3p440.h	Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC	2008-11-09 21:38:04 -08:00
pb1x00.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
pcm030.h	board support patch for phyCORE-MPC5200B-tiny	2009-07-10 23:21:32 +02:00
pcs440ep.h	Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC	2008-11-09 21:38:04 -08:00
pcu_e.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
pdnb3.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
pf5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	2009-02-09 23:01:40 -08:00
pleb2.h	LAN91C96: Enable NET_MULTI LAN driver	2009-12-13 21:31:26 -08:00
pm9261.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
pm9263.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
ppmc7xx.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
ppmc8260.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
purple.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
pxa255_idp.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
qemu-mips.h	Refresh LZMA-lib to v4.65	2009-07-22 09:43:27 +02:00
qong.h	serial_mx31: allow it to work with mx27 too and rename to serial_mxc	2009-06-21 16:18:13 +02:00
quad100hd.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
quantum.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
r2dplus.h	Merge branch 'master' of /home/wd/git/u-boot/custodians	2009-07-13 23:37:59 +02:00
r7780mp.h	r7780mp: fix typo in Ethernet chip model number comment.	2009-09-10 23:11:03 +02:00
rd6281a.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
redwood.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
rmu.h	rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared	2009-06-10 00:15:11 +02:00
rsdproto.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
rsk7203.h	Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API	2009-07-22 22:53:44 -07:00
sacsng.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
sbc35_a9g20.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
sbc405.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	2009-06-12 20:39:47 +02:00
sbc2410x.h	Add a unified s3c24x0 header file	2009-11-27 16:26:13 -06:00
sbc8240.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
sbc8260.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
sbc8349.h	sbc8349: fix incorrect comment	2009-10-28 22:07:56 +01:00
sbc8548.h	sbc8548: reclaim wasted sector in boot flash	2009-09-30 08:29:47 -05:00
sbc8560.h	Update all board to support new bbmiiphy driver (with multibus support)	2009-10-10 23:16:55 -07:00
sbc8641d.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
sc3.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
sc520_cdp.h	i386: Fix malloc initialization	2009-12-05 01:02:10 +01:00
sc520_spunk.h	i386: Fix malloc initialization	2009-12-05 01:02:10 +01:00
sc520_spunk_rel.h	…
scb9328.h	Convert DM9000 driver for CONFIG_NET_MULTI	2009-06-15 00:13:55 -07:00
sequoia.h	Adds EHCI definitions to sequoia board configuration file.	2010-01-09 10:27:21 +01:00
sh7763rdp.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	2009-07-08 11:43:16 +09:00
sh7785lcr.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	2009-07-08 11:43:16 +09:00
shannon.h	arm: clean cache management	2009-04-05 13:06:31 +02:00
sheevaplug.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
smdk2400.h	Add a unified s3c24x0 header file	2009-11-27 16:26:13 -06:00
smdk2410.h	Add a unified s3c24x0 header file	2009-11-27 16:26:13 -06:00
smdk6400.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
smdkc100.h	s5pc1xx: update cache routines	2010-01-23 08:15:48 -06:00
smmaco4.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
socrates.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
sorcery.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
spc1920.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
spear-common.h	SPEAr : Support added for SPEAr600 board	2010-01-23 08:15:49 -06:00
spear3xx.h	SPEAr : Support added for SPEAr320 board	2010-01-23 08:15:50 -06:00
spear6xx.h	SPEAr : Support added for SPEAr600 board	2010-01-23 08:15:49 -06:00
spieval.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
stxgp3.h	ppc: Clean up calling of phy_reset() during init	2009-09-22 23:05:29 +02:00
stxssa.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
stxxtc.h	FDT: remove obsolete OF_CPU and OF_SOC macros.	2009-09-22 22:59:27 +02:00
svm_sc8xx.h	Remove legacy NAND and disk on chip references from boards.	2009-07-17 15:03:28 -05:00
taihu.h	i2c: Update references to individual i2c commands	2009-06-12 20:39:46 +02:00
taishan.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
tb0229.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
tcm-bf518.h	Blackfin: tcm-bf518: new board port	2010-01-17 09:17:27 -05:00
tcm-bf537.h	Blackfin: update tiny board settings (voltage/default env)	2010-01-17 09:17:26 -05:00
tny_a9260.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
trab.h	Add a unified s3c24x0 header file	2009-11-27 16:26:13 -06:00
trizepsiv.h	xscale: add support for the polaris board	2009-07-06 21:52:58 +02:00
uc100.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
uc101.h	mpc5200, mucmc52, uc101: config cleanup	2009-09-25 01:19:17 +02:00
utx8245.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	2009-02-18 00:47:43 +01:00
v5fx30teval.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
v37.h	Separate mtdparts command from jffs2	2009-03-20 22:39:14 +01:00
v38b.h	boards: move board_get_enetaddr() into board-specific init	2009-03-20 22:39:12 +01:00
vct.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00
versatile.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
virtlab2.h	TQM8xx* boards: set larger SMC Rx buffer len	2009-07-28 22:39:04 +02:00
vme8349.h	mpc83xx: Add support for MPC8349 esd caddy2	2010-01-07 18:34:31 -06:00
voiceblue.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
walnut.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
wepep250.h	pxa: move serial driver to drivers/serial	2009-06-12 20:39:52 +02:00
xaeniax.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
xilinx-ppc.h	mtd: MTD related config header changes (mtdparts command)	2009-06-12 20:45:47 +02:00
xilinx-ppc405-generic.h	ppc4xx: Generic architecture for xilinx ppc405(v3)	2008-10-24 17:26:09 +02:00
xilinx-ppc405.h	ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg	2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
xilinx-ppc440.h	ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg	2008-10-31 10:31:02 +01:00
xm250.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
xsengine.h	Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API	2009-10-04 22:37:03 -07:00
yosemite.h	rename CFG_ macros to CONFIG_SYS	2008-10-18 21:54:03 +02:00
yucca.h	ppc4xx: Consolidate 4xx PCIe board specific configuration	2009-11-09 11:26:57 +01:00
zeus.h	Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC	2008-11-09 21:38:04 -08:00
zylonite.h	common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL	2009-12-08 22:14:07 +01:00