mpc83xx: Add support for MPC8349 esd caddy2
The caddy2 is a variant of the already supported vme8349. So we just add the differences to this board port. To better support those two boards we switched from fixed SDRAM configuration to usage of spd_sdram(). This is done by providing a board specific SPD EEPROM routine with different values for both boards. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de> changed to use mkconfig -t option instead, plus misc codingstyle fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
This commit is contained in:
Reinhard Arlt
Kim Phillips
parent
7693640acd
commit
1dee9be683
|
|
@ -36,6 +36,7 @@ Reinhard Arlt <reinhard.arlt@esd-electronics.com>
|
|||
mecp5200 MPC5200
|
||||
pf5200 MPC5200
|
||||
|
||||
caddy2 MPC8349
|
||||
vme8349 MPC8349
|
||||
|
||||
CPCI750 PPC750FX/GX
|
||||
|
|
|
|||
1
MAKEALL
1
MAKEALL
|
|
@ -358,6 +358,7 @@ LIST_8260=" \
|
|||
#########################################################################
|
||||
|
||||
LIST_83xx=" \
|
||||
caddy2 \
|
||||
kmeter1 \
|
||||
MPC8313ERDB_33 \
|
||||
MPC8313ERDB_NAND_66 \
|
||||
|
|
|
|||
3
Makefile
3
Makefile
|
|
@ -2400,8 +2400,9 @@ SIMPC8313_SP_config: unconfig
|
|||
TQM834x_config: unconfig
|
||||
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
|
||||
|
||||
caddy2_config \
|
||||
vme8349_config: unconfig
|
||||
@$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
|
||||
@$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
|
||||
|
||||
#########################################################################
|
||||
## MPC85xx Systems
|
||||
|
|
|
|||
|
|
@ -38,63 +38,13 @@
|
|||
#endif
|
||||
#include <asm/io.h>
|
||||
#include <asm/mmu.h>
|
||||
#include <spd.h>
|
||||
#include <spd_sdram.h>
|
||||
#include <i2c.h>
|
||||
#include <netdev.h>
|
||||
|
||||
void ddr_enable_ecc(unsigned int dram_size);
|
||||
|
||||
int fixed_sdram(void)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||
u32 msize = 0;
|
||||
u32 ddr_size;
|
||||
u32 ddr_size_log2;
|
||||
|
||||
msize = CONFIG_SYS_DDR_SIZE;
|
||||
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
||||
(ddr_size > 1);
|
||||
ddr_size = ddr_size>>1, ddr_size_log2++) {
|
||||
if (ddr_size & 1)
|
||||
return -1;
|
||||
}
|
||||
|
||||
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
|
||||
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
|
||||
LAWAR_SIZE);
|
||||
|
||||
#if (CONFIG_SYS_DDR_SIZE == 512)
|
||||
im->ddr.csbnds[0].csbnds = 0x0000001f;
|
||||
#else
|
||||
#warning Currently any DDR size other than 512MiB is not supported
|
||||
#endif
|
||||
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG | 0x00330000;
|
||||
|
||||
/* currently we use only one CS, so disable the other banks */
|
||||
im->ddr.csbnds[1].csbnds = 0x00000000;
|
||||
im->ddr.csbnds[2].csbnds = 0x00000000;
|
||||
im->ddr.csbnds[3].csbnds = 0x00000000;
|
||||
im->ddr.cs_config[1] = 0;
|
||||
im->ddr.cs_config[2] = 0;
|
||||
im->ddr.cs_config[3] = 0;
|
||||
|
||||
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
||||
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
||||
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
||||
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
||||
|
||||
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
||||
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
||||
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
||||
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
||||
|
||||
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
||||
sync();
|
||||
udelay(200);
|
||||
|
||||
/* enable DDR controller */
|
||||
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
||||
|
||||
return msize;
|
||||
}
|
||||
|
||||
phys_size_t initdram(int board_type)
|
||||
{
|
||||
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||
|
|
@ -103,10 +53,10 @@ phys_size_t initdram(int board_type)
|
|||
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
|
||||
return -1;
|
||||
|
||||
/* DDR SDRAM - Main SODIMM */
|
||||
/* DDR SDRAM - Main memory */
|
||||
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
||||
|
||||
msize = fixed_sdram();
|
||||
msize = spd_sdram();
|
||||
|
||||
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
||||
/*
|
||||
|
|
@ -124,17 +74,148 @@ phys_size_t initdram(int board_type)
|
|||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: esd VME8349\n");
|
||||
#ifdef VME_CADDY2
|
||||
puts("Board: esd VME-CADDY/2\n");
|
||||
#else
|
||||
puts("Board: esd VME-CPU/8349\n");
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef VME_CADDY2
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||
void ft_board_setup(void *blob, bd_t *bd)
|
||||
{
|
||||
ft_cpu_setup(blob, bd);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
ft_pci_setup(blob, bd);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
int misc_init_r()
|
||||
{
|
||||
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||
|
||||
clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
|
||||
* and VME-CADDY/2) have different SDRAM configurations.
|
||||
*/
|
||||
#ifdef VME_CADDY2
|
||||
#define SMALL_RAM 0xff
|
||||
#define LARGE_RAM 0x00
|
||||
#else
|
||||
#define SMALL_RAM 0x00
|
||||
#define LARGE_RAM 0xff
|
||||
#endif
|
||||
|
||||
#define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM))
|
||||
|
||||
static spd_eeprom_t default_spd_eeprom = {
|
||||
SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */
|
||||
SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */
|
||||
SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */
|
||||
SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */
|
||||
SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */
|
||||
SPD_VAL(0x00, 0x00), /* 05 */
|
||||
SPD_VAL(0x40, 0x40), /* 06 */
|
||||
SPD_VAL(0x00, 0x00), /* 07 */
|
||||
SPD_VAL(0x05, 0x05), /* 08 */
|
||||
SPD_VAL(0x30, 0x30), /* 09 */
|
||||
SPD_VAL(0x45, 0x45), /* 10 */
|
||||
SPD_VAL(0x02, 0x02), /* 11 ecc used */
|
||||
SPD_VAL(0x82, 0x82), /* 12 */
|
||||
SPD_VAL(0x10, 0x10), /* 13 */
|
||||
SPD_VAL(0x08, 0x08), /* 14 */
|
||||
SPD_VAL(0x00, 0x00), /* 15 */
|
||||
SPD_VAL(0x0c, 0x0c), /* 16 */
|
||||
SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */
|
||||
SPD_VAL(0x38, 0x38), /* 18 */
|
||||
SPD_VAL(0x00, 0x00), /* 19 */
|
||||
SPD_VAL(0x02, 0x02), /* 20 */
|
||||
SPD_VAL(0x00, 0x00), /* 21 */
|
||||
SPD_VAL(0x03, 0x03), /* 22 */
|
||||
SPD_VAL(0x3d, 0x3d), /* 23 */
|
||||
SPD_VAL(0x45, 0x45), /* 24 */
|
||||
SPD_VAL(0x50, 0x50), /* 25 */
|
||||
SPD_VAL(0x45, 0x45), /* 26 */
|
||||
SPD_VAL(0x3c, 0x3c), /* 27 */
|
||||
SPD_VAL(0x28, 0x28), /* 28 */
|
||||
SPD_VAL(0x3c, 0x3c), /* 29 */
|
||||
SPD_VAL(0x2d, 0x2d), /* 30 */
|
||||
SPD_VAL(0x20, 0x80), /* 31 */
|
||||
SPD_VAL(0x20, 0x20), /* 32 */
|
||||
SPD_VAL(0x27, 0x27), /* 33 */
|
||||
SPD_VAL(0x10, 0x10), /* 34 */
|
||||
SPD_VAL(0x17, 0x17), /* 35 */
|
||||
SPD_VAL(0x3c, 0x3c), /* 36 */
|
||||
SPD_VAL(0x1e, 0x1e), /* 37 */
|
||||
SPD_VAL(0x1e, 0x1e), /* 38 */
|
||||
SPD_VAL(0x00, 0x00), /* 39 */
|
||||
SPD_VAL(0x00, 0x06), /* 40 */
|
||||
SPD_VAL(0x37, 0x37), /* 41 */
|
||||
SPD_VAL(0x4b, 0x7f), /* 42 */
|
||||
SPD_VAL(0x80, 0x80), /* 43 */
|
||||
SPD_VAL(0x18, 0x18), /* 44 */
|
||||
SPD_VAL(0x22, 0x22), /* 45 */
|
||||
SPD_VAL(0x00, 0x00), /* 46 */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
|
||||
SPD_VAL(0x10, 0x10), /* 62 */
|
||||
SPD_VAL(0x7e, 0x1d), /* 63 */
|
||||
{ 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
|
||||
SPD_VAL(0x00, 0x00), /* 72 */
|
||||
#ifdef VME_CADDY2
|
||||
{ "vme-caddy/2 ram " }
|
||||
#else
|
||||
{ "vme-cpu/2 ram " }
|
||||
#endif
|
||||
};
|
||||
|
||||
int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
||||
{
|
||||
int old_bus = I2C_GET_BUS();
|
||||
unsigned int l, sum;
|
||||
int valid = 0;
|
||||
|
||||
I2C_SET_BUS(0);
|
||||
|
||||
if (i2c_read(chip, addr, alen, buffer, len) == 0)
|
||||
if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
|
||||
sum = 0;
|
||||
for (l = 0; l < 63; l++)
|
||||
sum = (sum + buffer[l]) & 0xff;
|
||||
if (sum == buffer[63])
|
||||
valid = 1;
|
||||
else
|
||||
printf("Invalid checksum in EEPROM %02x %02x\n",
|
||||
sum, buffer[63]);
|
||||
}
|
||||
|
||||
if (valid == 0) {
|
||||
memcpy(buffer, (void *)&default_spd_eeprom, len);
|
||||
sum = 0;
|
||||
for (l = 0; l < 63; l++)
|
||||
sum = (sum + buffer[l]) & 0xff;
|
||||
if (sum != buffer[63])
|
||||
printf("Invalid checksum in FLASH %02x %02x\n",
|
||||
sum, buffer[63]);
|
||||
buffer[63] = sum;
|
||||
}
|
||||
|
||||
I2C_SET_BUS(old_bus);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -34,6 +34,13 @@
|
|||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* Top level Makefile configuration choices
|
||||
*/
|
||||
#ifdef CONFIG_MK_caddy2
|
||||
#define VME_CADDY2
|
||||
#endif
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
|
|
@ -43,6 +50,8 @@
|
|||
#define CONFIG_MPC8349 1 /* MPC8349 specific */
|
||||
#define CONFIG_VME8349 1 /* ESD VME8349 board specific */
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_PCI
|
||||
/* Don't enable PCI2 on vme834x - it doesn't exist physically. */
|
||||
#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
|
||||
|
|
@ -75,7 +84,9 @@
|
|||
*/
|
||||
#define CONFIG_DDR_ECC /* only for ECC DDR module */
|
||||
#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
|
||||
#undef CONFIG_SPD_EEPROM /* dont use SPD EEPROM for DDR setup*/
|
||||
#define CONFIG_SPD_EEPROM
|
||||
#define SPD_EEPROM_ADDRESS 0x54
|
||||
#define CONFIG_SYS_READ_SPD vme8349_read_spd
|
||||
#define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */
|
||||
|
||||
/*
|
||||
|
|
@ -96,54 +107,40 @@
|
|||
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
|
||||
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
|
||||
#define CONFIG_DDR_2T_TIMING
|
||||
|
||||
/*
|
||||
* Manually set up DDR parameters
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_SIZE 512 /* MB */
|
||||
|
||||
#if (CONFIG_SYS_DDR_SIZE == 512)
|
||||
#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
|
||||
CSCONFIG_COL_BIT_10 | \
|
||||
CSCONFIG_BANK_BIT_3)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Manually set up DDR parameters
|
||||
*/
|
||||
#define CONFIG_SYS_DDR_TIMING_0 0x00220802
|
||||
#define CONFIG_SYS_DDR_TIMING_1 0x39377322
|
||||
#define CONFIG_SYS_DDR_TIMING_2 0x2f9848ca /* P9-45, tuning? */
|
||||
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
|
||||
#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuf,no DYN_PWR */
|
||||
#define CONFIG_SYS_DDR_MODE 0x07940242
|
||||
#define CONFIG_SYS_DDR_MODE2 0x00000000
|
||||
/* autocharge,no open page */
|
||||
#define CONFIG_SYS_DDR_INTERVAL 0x04060100
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG 0x63000000
|
||||
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x04061000
|
||||
#define CONFIG_SYS_DDRCDR 0x80080001
|
||||
|
||||
/*
|
||||
* FLASH on the Local Bus
|
||||
*/
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
|
||||
#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
|
||||
/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
|
||||
|
||||
#ifdef VME_CADDY2
|
||||
#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */
|
||||
#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */
|
||||
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
|
||||
(2 << BR_PS_SHIFT) | /* 32bit */ \
|
||||
BR_V) /* valid */
|
||||
|
||||
#define CONFIG_SYS_OR0_PRELIM 0xF8006FF7 /* 128 MB flash size */
|
||||
#define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001A /* 128 MB window size */
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */
|
||||
#else
|
||||
#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
|
||||
#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
|
||||
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
|
||||
(2 << BR_PS_SHIFT) | /* 32bit */ \
|
||||
BR_V) /* valid */
|
||||
|
||||
#define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */
|
||||
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */
|
||||
#endif
|
||||
/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
|
||||
|
||||
#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801)
|
||||
#define CONFIG_SYS_OR1_PRELIM (0xffff8000 | 0x00000200)
|
||||
#define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200)
|
||||
#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000
|
||||
#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x0000000e)
|
||||
#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011)
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/
|
||||
|
|
@ -157,7 +154,7 @@
|
|||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
||||
#define CONFIG_SYS_RAMBOOT
|
||||
#else
|
||||
#undef CONFIG_SYS_RAMBOOT
|
||||
#undef CONFIG_SYS_RAMBOOT
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||
|
|
@ -174,11 +171,10 @@
|
|||
|
||||
/*
|
||||
* Local Bus LCRR and LBCR regs
|
||||
* LCRR: DLL bypass, Clock divider is 4
|
||||
* LCRR: no DLL bypass, Clock divider is 4
|
||||
* External Local Bus rate is
|
||||
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
|
||||
*/
|
||||
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
|
||||
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
|
||||
#define CONFIG_SYS_LBC_LBCR 0x00000000
|
||||
|
||||
|
|
@ -268,10 +264,10 @@
|
|||
#undef PCI_ONE_PCI1
|
||||
#endif
|
||||
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
|
||||
#ifndef VME_CADDY2
|
||||
#define CONFIG_NET_MULTI
|
||||
#endif
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
|
||||
#undef CONFIG_EEPRO100
|
||||
#undef CONFIG_TULIP
|
||||
|
|
@ -282,19 +278,26 @@
|
|||
#define PCI_IDSEL_NUMBER 0xFIXME
|
||||
#endif
|
||||
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
|
||||
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
/*
|
||||
* TSEC configuration
|
||||
*/
|
||||
#ifdef VME_CADDY2
|
||||
#define CONFIG_E1000
|
||||
#else
|
||||
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_TSEC_ENET)
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI
|
||||
#endif
|
||||
|
||||
#define CONFIG_GMII /* MII PHY management */
|
||||
#define CONFIG_GMII /* MII PHY management */
|
||||
#define CONFIG_TSEC1
|
||||
#define CONFIG_TSEC1_NAME "TSEC0"
|
||||
#define CONFIG_TSEC2
|
||||
|
|
@ -312,6 +315,12 @@
|
|||
|
||||
#endif /* CONFIG_TSEC_ENET */
|
||||
|
||||
#if defined(CONFIG_E1000)
|
||||
#ifndef CONFIG_NET_MULTI
|
||||
#define CONFIG_NET_MULTI
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
|
|
@ -560,7 +569,7 @@
|
|||
#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
|
||||
#undef CONFIG_BOOTARGS /* boot command will set bootargs */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"netdev=eth0\0" \
|
||||
|
|
@ -605,4 +614,9 @@
|
|||
|
||||
#define CONFIG_BOOTCOMMAND "run flash_self"
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
|
||||
unsigned char *buffer, int len);
|
||||
#endif
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
|
|
|||
Loading…
Reference in New Issue