84c960ce6d
Add support for EmbeddedPlanet EP88x boards
...
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12 23:17:31 +01:00
47705af5da
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads
2006-03-12 21:49:19 +01:00
795bee8496
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx
2006-03-12 21:33:52 +01:00
a3f0169880
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infr
2006-03-12 19:11:42 +01:00
0a3471fc78
Add netconsole and some more commands to RPXlite_DW board
...
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:57:35 +01:00
953c5b6f8b
Adjust "echo" as a default command
...
Patch by Sam Song, 19 Jun 2005
2006-03-12 16:51:59 +01:00
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
6cb142fa3b
Add missing Blackfin files.
2006-03-12 02:12:27 +01:00
8ff0208d31
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
...
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:55:43 +01:00
f47b661141
RPXlite configuration fixes
...
- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:48:55 +01:00
aba9f1af60
Memory configuration changes for ZPC.1900 board
...
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:45:44 +01:00
5797b821dc
Add support for Adder boards with 16MB SDRAM;
...
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
2006-03-12 01:43:03 +01:00
8371a2c0d4
Enable simple (non-redundant) NAND environment on delta board.
2006-03-08 00:13:40 +01:00
951a954b77
Merge with /home/wd/git/u-boot/master
...
Code cleanup.
2006-03-06 23:18:48 +01:00
ac7d97dcbb
Turned on SDRAM scrubbing.
2006-03-06 18:47:44 +01:00
43638c674a
Cleanup of NAND support of delta board using the Monahans Data Flash
...
Controller.
2006-03-06 15:04:25 +01:00
f9e029184b
NAND finally working. Two bugs fixed:
...
* For READ_STATUS and READID commands always 8 bytes need to be read from
NDDB. Otherwise they stay there and get send to flash as the first data
word when writing.
* In nand_base.c the oob variable is not reset so this->oob_buf is
overwritten what eventually screws up the bad block descriptor table.
2006-03-06 13:45:42 +01:00
bfc81252c0
Minor code cleanup
2006-03-06 13:03:37 +01:00
4e3ccd2692
Merge the new NAND code (testing-NAND brach); see doc/README.nand
...
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005
[Merge with /home/tur/nand/u-boot]
2006-03-06 11:25:22 +01:00
addb2e1650
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
...
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
bf7cac033b
Lots of new stuff:
...
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
00c35bd214
Added GPIO initialization of DF signal. Still not working.
2006-02-28 22:51:01 +01:00
82f2e33a8d
Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
...
use hush shell.
2006-02-28 18:39:20 +01:00
6949328d7d
First steps implementing NAND support. Not working, fails to read ID.
2006-02-28 18:05:25 +01:00
f6c0068fc1
Merge with Stefan Roese's branch with CFI driver fixes
2006-02-28 16:42:50 +01:00
36d2c5387d
Merge with /home/wd/git/u-boot/master
2006-02-28 16:39:47 +01:00
58ad497833
Convert mcc200 to use common CFI flash driver
...
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00
0377dca227
Merge /home/tur/nand/u-boot/
...
This is a first version of the testing-NAND branch merged back to main.
2006-02-24 14:16:31 +01:00
7d4d1ce48c
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-02-24 11:34:34 +01:00
038ccac511
Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling.
2006-02-24 09:37:22 +01:00
599f52253a
SDRAM now working.
2006-02-22 17:48:43 +01:00
ff3c2a9478
SDRAM now working for delta board, but there are still aliasing problems,
...
we only see 64MB.
2006-02-22 14:05:44 +01:00
6624b687bc
Rename SMMACO4 board into smmaco4 for consistency with Linux.
2006-02-22 10:25:39 +01:00
5f0be01356
Disable CMD_BSP for SMMACO4 board.
2006-02-22 02:39:31 +01:00
9cdc838613
Merge with /home/hs/PanDacom/u-boot-dev
2006-02-22 01:59:13 +01:00
86ea5f93d7
Initial port to MCC200 board (work in progress)
...
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00
654c2d2836
Merge with /home/sr/git/u-boot
2006-02-21 16:41:43 +01:00
075866d840
[Patch] Add basic support for the SMMACO4 Board from PanDaCom.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-02-20 17:34:12 +01:00
4f7a0e3671
New board directory and config for the benq delta board (copied from
...
zylonite). Minor pxa-regs.h update.
2006-02-20 16:37:37 +01:00
8fb1857b40
Merged and added more pxa-regs.h stuff, especially the GPIO Control
...
Register Definitions.
2006-02-20 15:59:07 +01:00
57dc57f14d
Merged sufficient changes to pxa-regs.h in order to make u-boot compile.
...
It doesn't run yet.
2006-02-19 16:03:49 +01:00
2688e2f972
Enable address translation on MPC83xx
...
Patch by Kumar Gala, 10 Feb 2006
2006-02-10 15:40:06 -06:00
6ece03f267
Config updated for compiling the SMC911111 network driver
2006-02-10 17:08:26 +01:00
b3c36e6b94
basic u-boot is working, boots into the command shell.
2006-02-09 13:19:25 +01:00
79830d591a
Convert CPCI750 to use common CFI flash driver
...
Patch by Reinhard Arlt, 8 Feb 2006
2006-02-08 15:54:15 +01:00
af646e865f
Forgot to add files to zylonite branch.
2006-02-07 20:48:45 +01:00
48a05a5188
Various changes to esd HH405 board specific files
...
Patch by Matthias Fuchs, 07 Feb 2006
2006-02-07 16:51:04 +01:00
84e106c09d
Update default environment for INKA4x00 board.
2006-02-07 15:18:25 +01:00
a7b9fb9110
Add VGA support (CT69000) to CPCI750 board.
...
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
Patch by Reinhard Arlt, 30 Dec 2005
2006-01-18 20:05:34 +01:00
2076d0a15f
PMC405 and CPCI405: Moved configuration of pci resources into config file.
...
PMC405 and CPCI2DP: Added firmware download and booting via pci.
Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Wolfgang Denk