Harald Welte
c5497debfc
bgt-gs305e: Target 3000 design files created (manually) from DXF
2023-02-03 12:28:35 +01:00
Harald Welte
8607ec5ffa
initial version of bgt-gs305e: BGT Mount for Netgear GS305E switch
2023-02-03 12:26:02 +01:00
Harald Welte
dcad3c6b6a
rj45_jumper_box: Add OSWH + sysmocom logo; final v2 as ordered
2023-01-20 16:38:05 +01:00
Harald Welte
561c824219
rj45_jumper_box: Connect shield of two connectors
2023-01-20 10:46:32 +01:00
Harald Welte
b625dbf06b
rj45_jumper_box: Use different RJ45 jack; both on top layer
...
The original design (one RJ45 on top, one on bottom) was easy to route
but was difficult to handle. Let's swap both connectors to top, and use
a low-cost Chinese RJ45.
2023-01-20 10:44:04 +01:00
Harald Welte
0137f0f2a7
sfp-experimenter: add datasheets of possible alternative LVDS tx/rx
2022-11-14 17:57:25 +01:00
Harald Welte
e4c04baf0d
sfp-experimenter: Add LVDS transmitter/receiver data sheets
2022-11-14 16:33:06 +01:00
Harald Welte
7b4ddba001
initial check-in of bgt-keystone project
...
This adds a 3U component carrier module into which you can mix and
match keystone modules as needed.
2022-10-22 14:36:52 +02:00
Martin Schramm
fa5b17a0bd
ngff-cardem: update schematics
...
This includes now the GND for OsmoSer conn.
2022-09-19 13:22:19 +02:00
Martin Schramm
f0f029afd5
ngff-cardem: connect OsmoSer's GND to GND (solves SYS#5514)
...
This change somehow didn't make it upstream though committed as
bf211d3; so recreated.
2022-09-19 13:16:04 +02:00
Harald Welte
4833d17d6b
RS422-protector (to be used in OCTOI hub)
2022-08-22 20:38:22 +02:00
Harald Welte
27934336de
update git URLs (git -> https; gitea)
2022-06-18 13:42:33 +02:00
Harald Welte
e039fe1590
xhfc-breaout: Conncet SPI_INV to GND
...
This was missing from the v1 design. SPI_INV must be tied to either high
or low to select the SPI clock polarity. It was tied to low by manawyrm
in his manual rework, so let's reflect this in the design accordingly.
2022-06-04 09:12:28 +02:00
Harald Welte
1c45406634
xhfc-breakout: Fix some part values; documentation
...
* R18 + R34 are 330k and not 3k9
* R5, R6, R21, R22 are 3R3 instead of 62R in universal TE/NT
* add various documentation text snippets
2022-05-19 22:12:32 +02:00
Harald Welte
5c891bf700
xhfc-breakout: check-in PDF renderings
2022-05-13 11:36:44 +02:00
Harald Welte
d175be3b69
xhfc-breakout: bom attributes
2022-05-13 11:34:47 +02:00
Harald Welte
a71a2df64e
xhfc-breakout: Complete routing of v1 board
2022-05-13 11:34:46 +02:00
Harald Welte
5e5699f447
xhfc-breakout: more WIP layout + schematics work
...
schematics should be done now, layout about 65%
2022-05-13 11:34:46 +02:00
Harald Welte
b790049faa
xhfc-breakout: partial PCB layout / component arrangement
2022-05-13 11:34:46 +02:00
Harald Welte
03b985b4c5
xhfc-breakout: Smash parts / align labels / better readability
2022-05-13 11:34:46 +02:00
Harald Welte
16430cf3fe
xhfc-breakout: Complete line interface from chip to RJ45
2022-05-13 11:34:46 +02:00
Harald Welte
8898e317c1
xhfc-breakout: Data sheets of transformer and BAV99 diode
2022-05-13 11:34:46 +02:00
Harald Welte
79edfc1b20
xhfc-breakout: WIP: Initial xhfc breakout board design
...
Related: OS#5417
2022-05-13 11:34:46 +02:00
Harald Welte
ce3668919c
ngff-cardem: Add PDF renderings of schematics + component placement
2022-03-24 15:26:45 +01:00
Martin Schramm
16b27a6057
GTM900-breakout: add next design v2
2022-02-21 20:14:51 +01:00
Harald Welte
14b64634fa
bgt-pwr-dist: Increase restring on bottom side
...
(v2 only increased it on top side, my mistake)
Incremental fix for 84166fd4ab
2022-02-14 20:43:50 +01:00
Harald Welte
d08d39b1bf
bgt-pwr-dist: Part attribute annotation for BOM generation
2022-02-14 20:43:50 +01:00
Harald Welte
41e68196b8
bgt-pwr-dist: Finalize v2
...
* no milling for DC jack (cheaper PCB production)
* update version to v2
2022-01-31 22:39:17 +01:00
Harald Welte
f909ee9646
bgt-pwr-dist: cosmetics
...
* name / license / version on back side silk screen
* OSHW logo on silk screen
* polarity markers on back side silk screen
2022-01-31 22:05:57 +01:00
Harald Welte
84166fd4ab
bgt-prw-dist: various small fixes
...
* update littelfuse library for 0.9mm drill (instead of 0.8mm)
* increase restring sizes
* increase trace width from 2mm to 2.54mm
* 10mm THT resistor instead of 7mm
2022-01-31 22:00:47 +01:00
Harald Welte
9e98d2ed0b
Add component carrier module mechanics for Ettus USRP B2xx
2021-12-23 19:20:00 +01:00
Harald Welte
f49ce5bfc5
add component carrier face plate designs for BG7TBL OCXO + GPSDO
2021-12-23 16:30:50 +01:00
Harald Welte
f922d1841f
Add bgt-pwr-dist; A 3U component-carrier DC distribution module
2021-12-23 16:10:25 +01:00
Harald Welte
dcec482b43
bgt-rpi4: Mounting a Raspberry Pi [4] in a 3U 19" component carrier
2021-12-12 20:58:07 +01:00
Harald Welte
b76fb674e1
Add schematics + PCB layout for a simple AMR break-out board
...
AMR (Audio Modem Riser) is a standard for pluggable boards with
audio codecs to connect to the AC97 interface of mainboards dating
to the late-90ies / early 2000s.
The idea of this break-out boards is to be able to interface such a
modem riser card with a microcontroller or FPGA, basically using them
as a digital interface to analog phone lines for softmodem development
as part of osmocom retronetworking.
2021-11-17 19:10:31 +01:00
Harald Welte
ac1e93c309
Merge remote-tracking branch 'sysmocom/master' for ngff-cardem board
...
This is a design that sysmocom did during past month and which now is
released as OSHW.
2021-09-25 12:06:15 +02:00
Martin Schramm
cee8a37697
ngff-cardem: correct typo and add silk screen in bott name plate
2021-09-24 18:07:46 +02:00
Martin Schramm
e41091a9e6
ngff-cardem: bump version to 2
2021-09-23 15:55:24 +02:00
Martin Schramm
b9d97635fa
ngff-cardem: DRC after repaired clearance
2021-09-22 17:46:51 +02:00
Martin Schramm
26c8bf1c02
ngff-cardem: improve clearance details to gain lower tech class than 8
...
... at Eurocircuits
2021-09-22 17:30:32 +02:00
Martin Schramm
f3d18cceb3
ngff-cardem: cosmetics + DRC
2021-09-22 16:35:52 +02:00
Martin Schramm
00fca9b5e2
ngff-cardem: remove J101, populate R101 (solves SYS#5611)
2021-09-15 20:54:09 +02:00
Martin Schramm
dbb4dde9c4
ngff-cardem: adjust setting resistors for Murata OKL (solves SYS#5613)
2021-09-09 18:33:47 +02:00
Martin Schramm
4ce9836cdd
ngff-cardem: unconditionally enable PWR switch (solves SYS#5520)
2021-09-09 17:19:32 +02:00
Martin Schramm
b5036db8b1
ngff-cardem: split C301 into two footprints (solves SYS#5614)
2021-09-09 16:53:32 +02:00
Martin Schramm
6ee758e723
ngff-cardem: add PU+PD footpint for DCDC ENA input (solves SYS#5519)
2021-09-09 15:42:48 +02:00
Martin Schramm
6dd4707aac
ngff-cardem: insert 2 PUs as DNP for possible !CONNECT_UART{1,2} biasing
...
solves SYS#5532
2021-09-08 20:03:57 +02:00
Martin Schramm
d771bed4ba
ngff-cardem: populate R102 to uncond' release /NGFF_RESET (solves SYS#5531)
2021-09-08 18:55:21 +02:00
Martin Schramm
316b5324c8
ngff-cardem: exchange two BJT to available types (BC850)
2021-09-08 18:27:11 +02:00
Martin Schramm
e5095ff222
ngff-cardem: make DCDC301 default to Murata OKL-T/3-W12P-C
2021-09-08 17:28:02 +02:00