bgt-rpi4: Mounting a Raspberry Pi [4] in a 3U 19" component carrier

laforge/xhfc
Harald Welte 12 months ago
parent b76fb674e1
commit dcec482b43
  1. 37
      bgt-rpi/README.md
  2. 108204
      bgt-rpi/bgt-rpi4-mounting.dxf
  3. 3252
      bgt-rpi/bgt-rpi4-tfp6.dxf

@ -0,0 +1,37 @@
# Raspberry Pi [4] mounting in 3U component carrier
This is a mechanical design to mount a Raspberry Pi in a 3U component carrier.
Why would one want to do that? There may be other equipment in the component
carrier that should be controlled by the Raspberry Pi.
If you just want to mount multiple RPI in a 19" rack, there are many other
options available, mass produced at lower cost and achieving higher densities.
## face plate
6 TE wide face plate
* 128.4 x 30.22 mm
* 9 openings
* 596 mm total path
* 2mm (2.5mm) material
## mounting plate
* 100 x 90 mm
* 6 openings
* 430 mm total path
* 1.5 mm material
## BOM
* 1x face plate (above)
* 1x mounting plate (above)
* 4x 3mm nylon spacers between mounting plate + RPI4
* 1x Lumberg KLB13 (2.5mm stereo jack for UART)
* 1x Fischer VS 1 (connects face + mounting plate)
* 2x Fischer KN 1
* 2x Fischer HS 1 or RS 1 M2,5x11

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff
Loading…
Cancel
Save