electronics
/
osmo-small-hardware
10
0
Fork 2
Code Pull Requests Releases Activity

rj45_jumper_box: Use different RJ45 jack; both on top layer 

The original design (one RJ45 on top, one on bottom) was easy to route
but was difficult to handle. Let's swap both connectors to top, and use
a low-cost Chinese RJ45.
This commit is contained in:
Harald Welte 2023-01-20 10:40:02 +01:00
parent 0137f0f2a7
commit b625dbf06b
3 changed files with 107642 additions and 165 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

107377
rj45-jumper-box/components/2007281104_RCH-RC01133_C708616.svg Normal file
View File

File diff suppressed because it is too large Load Diff
Side by Side

After

Width:  |  Height:  |  Size: 4.4 MiB

325
rj45-jumper-box/rj45_jumper_box.brd
View File

@ -36,8 +36,8 @@
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="yes" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
@ -71,28 +71,28 @@
</layers>
<board>
<plain>
<wire x1="0" y1="0" x2="50" y2="0" width="0" layer="20"/>
<wire x1="50" y1="0" x2="50" y2="25" width="0" layer="20"/>
<wire x1="50" y1="25" x2="0" y2="25" width="0" layer="20"/>
<wire x1="0" y1="0" x2="60" y2="0" width="0" layer="20"/>
<wire x1="60" y1="0" x2="60" y2="25" width="0" layer="20"/>
<wire x1="60" y1="25" x2="0" y2="25" width="0" layer="20"/>
<wire x1="0" y1="25" x2="0" y2="0" width="0" layer="20"/>
<text x="20.32" y="20.955" size="1.778" layer="21" font="vector" ratio="14">1</text>
<text x="20.32" y="18.415" size="1.778" layer="21" font="vector" ratio="14">2</text>
<text x="20.32" y="15.875" size="1.778" layer="21" font="vector" ratio="14">3</text>
<text x="20.32" y="13.335" size="1.778" layer="21" font="vector" ratio="14">4</text>
<text x="20.32" y="10.795" size="1.778" layer="21" font="vector" ratio="14">5</text>
<text x="20.32" y="8.255" size="1.778" layer="21" font="vector" ratio="14">6</text>
<text x="20.32" y="5.715" size="1.778" layer="21" font="vector" ratio="14">7</text>
<text x="20.32" y="3.175" size="1.778" layer="21" font="vector" ratio="14">8</text>
<text x="29.21" y="20.955" size="1.778" layer="21" font="vector" ratio="14">1</text>
<text x="29.21" y="18.415" size="1.778" layer="21" font="vector" ratio="14">2</text>
<text x="29.21" y="15.875" size="1.778" layer="21" font="vector" ratio="14">3</text>
<text x="29.21" y="13.335" size="1.778" layer="21" font="vector" ratio="14">4</text>
<text x="29.21" y="10.795" size="1.778" layer="21" font="vector" ratio="14">5</text>
<text x="29.21" y="8.255" size="1.778" layer="21" font="vector" ratio="14">6</text>
<text x="29.21" y="5.715" size="1.778" layer="21" font="vector" ratio="14">7</text>
<text x="29.21" y="3.175" size="1.778" layer="21" font="vector" ratio="14">8</text>
<text x="4.445" y="0.635" size="1.778" layer="21" font="vector" ratio="14">RJ45 jumper box by LaF0rge</text>
<text x="38.735" y="20.955" size="1.27" layer="21" font="vector" ratio="14">X2</text>
<text x="24.13" y="20.955" size="1.778" layer="21" font="vector" ratio="14">1</text>
<text x="24.13" y="18.415" size="1.778" layer="21" font="vector" ratio="14">2</text>
<text x="24.13" y="15.875" size="1.778" layer="21" font="vector" ratio="14">3</text>
<text x="24.13" y="13.335" size="1.778" layer="21" font="vector" ratio="14">4</text>
<text x="24.13" y="10.795" size="1.778" layer="21" font="vector" ratio="14">5</text>
<text x="24.13" y="8.255" size="1.778" layer="21" font="vector" ratio="14">6</text>
<text x="24.13" y="5.715" size="1.778" layer="21" font="vector" ratio="14">7</text>
<text x="24.13" y="3.175" size="1.778" layer="21" font="vector" ratio="14">8</text>
<text x="34.925" y="20.955" size="1.778" layer="21" font="vector" ratio="14">1</text>
<text x="34.925" y="18.415" size="1.778" layer="21" font="vector" ratio="14">2</text>
<text x="34.925" y="15.875" size="1.778" layer="21" font="vector" ratio="14">3</text>
<text x="34.925" y="13.335" size="1.778" layer="21" font="vector" ratio="14">4</text>
<text x="34.925" y="10.795" size="1.778" layer="21" font="vector" ratio="14">5</text>
<text x="34.925" y="8.255" size="1.778" layer="21" font="vector" ratio="14">6</text>
<text x="34.925" y="5.715" size="1.778" layer="21" font="vector" ratio="14">7</text>
<text x="34.925" y="3.175" size="1.778" layer="21" font="vector" ratio="14">8</text>
<text x="8.255" y="0.635" size="1.778" layer="21" font="vector" ratio="14">RJ45 jumper box by LaF0rge</text>
<text x="51.435" y="0.635" size="1.778" layer="25" font="vector" ratio="14">&gt;REVISION</text>
</plain>
<libraries>
<library name="pinhead">
@ -181,35 +181,38 @@
</library>
<library name="stewart-rj45">
<packages>
<package name="SS-7188S-A-NF">
<description>Bel Stewart SS-7188S-A-NF</description>
<wire x1="-7.975" y1="8.142" x2="7.975" y2="8.142" width="0.2032" layer="21"/>
<wire x1="7.975" y1="8.142" x2="7.975" y2="2.62" width="0.2032" layer="21"/>
<wire x1="7.975" y1="2.62" x2="7.975" y2="0.02" width="0.2032" layer="51"/>
<wire x1="7.975" y1="0.02" x2="7.975" y2="-12.568" width="0.2032" layer="21"/>
<wire x1="7.975" y1="-12.568" x2="-7.975" y2="-12.568" width="0.2032" layer="21"/>
<wire x1="-7.975" y1="-12.568" x2="-7.975" y2="0.02" width="0.2032" layer="21"/>
<wire x1="-7.975" y1="0.02" x2="-7.975" y2="2.52" width="0.2032" layer="51"/>
<wire x1="-7.975" y1="2.52" x2="-7.975" y2="8.142" width="0.2032" layer="21"/>
<pad name="S1" x="-7.747" y="1.27" drill="1.6" diameter="2.2"/>
<pad name="S2" x="7.747" y="1.27" drill="1.6" diameter="2.2"/>
<pad name="8" x="4.445" y="7.112" drill="0.9" diameter="1.5"/>
<pad name="7" x="3.175" y="4.572" drill="0.9" diameter="1.5"/>
<pad name="6" x="1.905" y="7.112" drill="0.9" diameter="1.5"/>
<pad name="5" x="0.635" y="4.572" drill="0.9" diameter="1.5"/>
<pad name="4" x="-0.635" y="7.112" drill="0.9" diameter="1.5"/>
<pad name="3" x="-1.905" y="4.572" drill="0.9" diameter="1.5"/>
<pad name="2" x="-3.175" y="7.112" drill="0.9" diameter="1.5"/>
<pad name="1" x="-4.445" y="4.572" drill="0.9" diameter="1.5"/>
<text x="-3.81" y="-10.795" size="1.27" layer="25">&gt;NAME</text>
<text x="-3.81" y="-8.255" size="1.27" layer="27">&gt;VALUE</text>
<hole x="-5.715" y="-1.778" drill="3.2512"/>
<hole x="5.715" y="-1.778" drill="3.2512"/>
<package name="RC01133">
<description>Wen ZhouyRut Chuan Electronic C., Ltd.
RCH-56-31
RC01133</description>
<wire x1="-8.15" y1="7.95" x2="-6.35" y2="7.95" width="0.127" layer="21"/>
<wire x1="-6.35" y1="7.95" x2="6.35" y2="7.95" width="0.127" layer="21"/>
<wire x1="6.35" y1="7.95" x2="8.15" y2="7.95" width="0.127" layer="21"/>
<wire x1="8.15" y1="7.95" x2="8.15" y2="-7.95" width="0.127" layer="21"/>
<wire x1="8.15" y1="-7.95" x2="-8.15" y2="-7.95" width="0.127" layer="21"/>
<wire x1="-8.15" y1="-7.95" x2="-8.15" y2="7.95" width="0.127" layer="21"/>
<hole x="-6.3" y="2.7" drill="3.25"/>
<hole x="6.3" y="2.7" drill="3.25"/>
<pad name="SHLD1" x="-8.05" y="-0.73" drill="1.6"/>
<pad name="SHLD2" x="8.05" y="-0.73" drill="1.6"/>
<wire x1="-6.35" y1="7.95" x2="-6.35" y2="0" width="0.127" layer="21"/>
<wire x1="-6.35" y1="0" x2="6.35" y2="0" width="0.127" layer="21"/>
<wire x1="6.35" y1="0" x2="6.35" y2="7.95" width="0.127" layer="21"/>
<pad name="1" x="-3.57" y="0.16" drill="0.9"/>
<pad name="2" x="-2.55" y="-1.62" drill="0.9"/>
<pad name="3" x="-1.53" y="0.16" drill="0.9"/>
<pad name="4" x="-0.51" y="-1.62" drill="0.9"/>
<pad name="5" x="0.51" y="0.16" drill="0.9"/>
<pad name="6" x="1.53" y="-1.62" drill="0.9"/>
<pad name="7" x="2.55" y="0.16" drill="0.9"/>
<pad name="8" x="3.57" y="-1.62" drill="0.9"/>
<text x="-8.89" y="-7.62" size="1.27" layer="25" font="vector" ratio="14" rot="R90">&gt;NAME</text>
</package>
</packages>
</library>
</libraries>
<attributes>
<attribute name="REVISION" value="v2"/>
</attributes>
<variantdefs>
</variantdefs>
@ -217,60 +220,52 @@
<class number="0" name="default" width="0" drill="0">
</class>
</classes>
<designrules name="default *">
<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
&lt;p&gt;
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.</description>
<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
&lt;p&gt;
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.</description>
<designrules name="jlcpcb-2layers *">
<description language="en">&lt;b&gt;JLCPCB design rules (2 layers)&lt;/b&gt;
&lt;ul&gt;
&lt;li&gt;Board thickness: 1.6mm&lt;/li&gt;
&lt;li&gt;Copper weight: 1oz (35um)&lt;/li&gt;
&lt;li&gt;Note: annular ring aren't minimal&lt;/li&gt;
&lt;/ul&gt;</description>
<param name="layerSetup" value="(1*16)"/>
<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
<param name="mdWireWire" value="8mil"/>
<param name="mdWirePad" value="8mil"/>
<param name="mdWireVia" value="8mil"/>
<param name="mdPadPad" value="8mil"/>
<param name="mdPadVia" value="8mil"/>
<param name="mdViaVia" value="8mil"/>
<param name="mdSmdPad" value="8mil"/>
<param name="mdSmdVia" value="8mil"/>
<param name="mdSmdSmd" value="8mil"/>
<param name="mdViaViaSameLayer" value="8mil"/>
<param name="mtIsolate" value="1.6mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
<param name="mdWireWire" value="5mil"/>
<param name="mdWirePad" value="5mil"/>
<param name="mdWireVia" value="5mil"/>
<param name="mdPadPad" value="5mil"/>
<param name="mdPadVia" value="5mil"/>
<param name="mdViaVia" value="5mil"/>
<param name="mdSmdPad" value="5mil"/>
<param name="mdSmdVia" value="5mil"/>
<param name="mdSmdSmd" value="5mil"/>
<param name="mdViaViaSameLayer" value="6mil"/>
<param name="mnLayersViaInSmd" value="2"/>
<param name="mdCopperDimension" value="40mil"/>
<param name="mdDrill" value="8mil"/>
<param name="mdCopperDimension" value="0.2mm"/>
<param name="mdDrill" value="6mil"/>
<param name="mdSmdStop" value="0mil"/>
<param name="msWidth" value="0.5mm"/>
<param name="msDrill" value="24mil"/>
<param name="msMicroVia" value="9.99mm"/>
<param name="msWidth" value="5mil"/>
<param name="msDrill" value="0.3mm"/>
<param name="msMicroVia" value="0.3mm"/>
<param name="msBlindViaRatio" value="0.5"/>
<param name="rvPadTop" value="0.25"/>
<param name="rvPadInner" value="0.25"/>
<param name="rvPadBottom" value="0.25"/>
<param name="rvViaOuter" value="0.25"/>
<param name="rvViaInner" value="0.25"/>
<param name="rvMicroViaOuter" value="0.25"/>
<param name="rvMicroViaInner" value="0.25"/>
<param name="rvPadTop" value="0.4"/>
<param name="rvPadInner" value="0"/>
<param name="rvPadBottom" value="0.4"/>
<param name="rvViaOuter" value="0"/>
<param name="rvViaInner" value="0"/>
<param name="rvMicroViaOuter" value="0"/>
<param name="rvMicroViaInner" value="0"/>
<param name="rlMinPadTop" value="10mil"/>
<param name="rlMaxPadTop" value="20mil"/>
<param name="rlMaxPadTop" value="80mil"/>
<param name="rlMinPadInner" value="10mil"/>
<param name="rlMaxPadInner" value="20mil"/>
<param name="rlMinPadBottom" value="10mil"/>
<param name="rlMaxPadBottom" value="20mil"/>
<param name="rlMinViaOuter" value="8mil"/>
<param name="rlMaxPadBottom" value="80mil"/>
<param name="rlMinViaOuter" value="3mil"/>
<param name="rlMaxViaOuter" value="20mil"/>
<param name="rlMinViaInner" value="8mil"/>
<param name="rlMaxViaInner" value="20mil"/>
<param name="rlMinMicroViaOuter" value="4mil"/>
<param name="rlMinMicroViaOuter" value="3mil"/>
<param name="rlMaxMicroViaOuter" value="20mil"/>
<param name="rlMinMicroViaInner" value="4mil"/>
<param name="rlMaxMicroViaInner" value="20mil"/>
@ -281,8 +276,8 @@ design rules under a new name.</description>
<param name="psElongationOffset" value="100"/>
<param name="mvStopFrame" value="1"/>
<param name="mvCreamFrame" value="0"/>
<param name="mlMinStopFrame" value="4mil"/>
<param name="mlMaxStopFrame" value="4mil"/>
<param name="mlMinStopFrame" value="0.05mm"/>
<param name="mlMaxStopFrame" value="0.05mm"/>
<param name="mlMinCreamFrame" value="0mil"/>
<param name="mlMaxCreamFrame" value="0mil"/>
<param name="mlViaStopLimit" value="0mil"/>
@ -397,137 +392,157 @@ design rules under a new name.</description>
</pass>
</autorouter>
<elements>
<element name="JP1" library="pinhead" package="1X08" value="" x="17.78" y="12.7" smashed="yes" rot="R270">
<attribute name="NAME" x="16.4338" y="23.4188" size="1.27" layer="25" font="vector" ratio="14"/>
<attribute name="VALUE" x="14.605" y="22.86" size="1.27" layer="27" rot="R270"/>
<element name="JP1" library="pinhead" package="1X08" value="" x="20.955" y="12.7" smashed="yes" rot="R270">
<attribute name="NAME" x="19.6088" y="23.4188" size="1.27" layer="25" font="vector" ratio="14"/>
<attribute name="VALUE" x="17.78" y="22.86" size="1.27" layer="27" rot="R270"/>
</element>
<element name="JP2" library="pinhead" package="1X08" value="" x="33.02" y="12.7" smashed="yes" rot="R270">
<attribute name="NAME" x="31.0388" y="23.4188" size="1.27" layer="25" font="vector" ratio="14"/>
<attribute name="VALUE" x="29.845" y="22.86" size="1.27" layer="27" rot="R270"/>
</element>
<element name="X1" library="stewart-rj45" package="SS-7188S-A-NF" value="SS-7188S-A-NF" x="5.08" y="12.7" smashed="yes" rot="R270">
<attribute name="MANUFACTURER" value="Bel Stewart" x="5.08" y="12.7" size="1.778" layer="27" rot="R270" display="off"/>
<attribute name="OC_DIGIKEY" value="380-1047-ND" x="5.08" y="12.7" size="1.778" layer="27" rot="R270" display="off"/>
<attribute name="NAME" x="10.795" y="20.955" size="1.27" layer="25" font="vector" ratio="14"/>
<attribute name="VALUE" x="-3.175" y="16.51" size="1.27" layer="27" rot="R270"/>
</element>
<element name="X2" library="stewart-rj45" package="SS-7188S-A-NF" value="SS-7188S-A-NF" x="45.72" y="12.7" smashed="yes" rot="MR270">
<attribute name="MANUFACTURER" value="Bel Stewart" x="45.72" y="12.7" size="1.778" layer="28" rot="MR270" display="off"/>
<attribute name="OC_DIGIKEY" value="380-1047-ND" x="45.72" y="12.7" size="1.778" layer="28" rot="MR270" display="off"/>
<attribute name="NAME" x="46.99" y="3.81" size="1.27" layer="26" rot="MR180"/>
<attribute name="VALUE" x="53.975" y="16.51" size="1.27" layer="28" rot="MR270"/>
<element name="JP2" library="pinhead" package="1X08" value="" x="39.37" y="12.7" smashed="yes" rot="R270">
<attribute name="NAME" x="37.3888" y="23.4188" size="1.27" layer="25" font="vector" ratio="14"/>
<attribute name="VALUE" x="36.195" y="22.86" size="1.27" layer="27" rot="R270"/>
</element>
<element name="X1" library="stewart-rj45" package="RC01133" value="RJ45-RC01133" x="8.255" y="13.335" rot="R90"/>
<element name="X2" library="stewart-rj45" package="RC01133" value="RJ45-RC01133" x="52.07" y="12.7" rot="R270"/>
</elements>
<signals>
<signal name="X1_1">
<contactref element="X1" pad="1"/>
<contactref element="JP1" pad="1"/>
<wire x1="9.652" y1="17.145" x2="14.097" y2="21.59" width="0.5" layer="16"/>
<wire x1="14.097" y1="21.59" x2="17.78" y2="21.59" width="0.5" layer="16"/>
<wire x1="8.095" y1="9.765" x2="6.745" y2="9.765" width="0.3048" layer="16"/>
<wire x1="6.745" y1="9.765" x2="5.08" y2="11.43" width="0.3048" layer="16"/>
<wire x1="5.08" y1="11.43" x2="5.08" y2="15.875" width="0.3048" layer="16"/>
<wire x1="5.08" y1="15.875" x2="8.255" y2="19.05" width="0.3048" layer="16"/>
<wire x1="8.255" y1="19.05" x2="10.16" y2="19.05" width="0.3048" layer="16"/>
<wire x1="10.16" y1="19.05" x2="12.7" y2="21.59" width="0.3048" layer="16"/>
<wire x1="12.7" y1="21.59" x2="20.955" y2="21.59" width="0.3048" layer="16"/>
</signal>
<signal name="N$2">
<contactref element="X1" pad="2"/>
<contactref element="JP1" pad="2"/>
<wire x1="16.51" y1="19.05" x2="17.78" y2="19.05" width="0.5" layer="16"/>
<wire x1="12.192" y1="15.875" x2="13.335" y2="15.875" width="0.5" layer="16"/>
<wire x1="13.335" y1="15.875" x2="16.51" y2="19.05" width="0.5" layer="16"/>
<wire x1="9.875" y1="10.785" x2="6.995" y2="10.785" width="0.25" layer="16"/>
<wire x1="6.995" y1="10.785" x2="6.35" y2="11.43" width="0.3048" layer="16"/>
<wire x1="6.35" y1="11.43" x2="6.35" y2="15.875" width="0.3048" layer="16"/>
<wire x1="6.35" y1="15.875" x2="8.89" y2="18.415" width="0.3048" layer="16"/>
<wire x1="8.89" y1="18.415" x2="11.43" y2="18.415" width="0.3048" layer="16"/>
<wire x1="11.43" y1="18.415" x2="12.065" y2="19.05" width="0.3048" layer="16"/>
<wire x1="12.065" y1="19.05" x2="20.955" y2="19.05" width="0.3048" layer="16"/>
</signal>
<signal name="N$3">
<contactref element="X1" pad="3"/>
<contactref element="JP1" pad="3"/>
<wire x1="9.652" y1="14.605" x2="14.605" y2="14.605" width="0.5" layer="16"/>
<wire x1="14.605" y1="14.605" x2="16.51" y2="16.51" width="0.5" layer="16"/>
<wire x1="16.51" y1="16.51" x2="17.78" y2="16.51" width="0.5" layer="16"/>
<wire x1="8.095" y1="11.805" x2="5.975" y2="11.805" width="0.3048" layer="1"/>
<wire x1="5.975" y1="11.805" x2="5.08" y2="12.7" width="0.3048" layer="1"/>
<wire x1="5.08" y1="12.7" x2="5.08" y2="15.875" width="0.3048" layer="1"/>
<wire x1="5.08" y1="15.875" x2="8.255" y2="19.05" width="0.3048" layer="1"/>
<wire x1="8.255" y1="19.05" x2="14.605" y2="19.05" width="0.3048" layer="1"/>
<wire x1="14.605" y1="19.05" x2="17.145" y2="16.51" width="0.3048" layer="1"/>
<wire x1="17.145" y1="16.51" x2="20.955" y2="16.51" width="0.3048" layer="1"/>
</signal>
<signal name="N$4">
<contactref element="X1" pad="4"/>
<contactref element="JP1" pad="4"/>
<wire x1="12.192" y1="13.335" x2="15.875" y2="13.335" width="0.5" layer="16"/>
<wire x1="15.875" y1="13.335" x2="16.51" y2="13.97" width="0.5" layer="16"/>
<wire x1="16.51" y1="13.97" x2="17.78" y2="13.97" width="0.5" layer="16"/>
<wire x1="9.875" y1="12.825" x2="6.86" y2="12.825" width="0.25" layer="1"/>
<wire x1="6.86" y1="12.825" x2="6.35" y2="13.335" width="0.3048" layer="1"/>
<wire x1="6.35" y1="13.335" x2="6.35" y2="15.875" width="0.3048" layer="1"/>
<wire x1="6.35" y1="15.875" x2="8.89" y2="18.415" width="0.3048" layer="1"/>
<wire x1="8.89" y1="18.415" x2="13.335" y2="18.415" width="0.3048" layer="1"/>
<wire x1="13.335" y1="18.415" x2="17.78" y2="13.97" width="0.3048" layer="1"/>
<wire x1="17.78" y1="13.97" x2="20.955" y2="13.97" width="0.3048" layer="1"/>
</signal>
<signal name="N$5">
<contactref element="X1" pad="5"/>
<contactref element="JP1" pad="5"/>
<wire x1="9.652" y1="12.065" x2="15.875" y2="12.065" width="0.5" layer="16"/>
<wire x1="15.875" y1="12.065" x2="16.51" y2="11.43" width="0.5" layer="16"/>
<wire x1="16.51" y1="11.43" x2="17.78" y2="11.43" width="0.5" layer="16"/>
<wire x1="8.095" y1="13.845" x2="15.365" y2="13.845" width="0.25" layer="16"/>
<wire x1="15.365" y1="13.845" x2="17.78" y2="11.43" width="0.25" layer="16"/>
<wire x1="17.78" y1="11.43" x2="20.955" y2="11.43" width="0.25" layer="16"/>
<wire x1="21.59" y1="11.43" x2="20.955" y2="11.43" width="0.25" layer="16"/>
</signal>
<signal name="N$6">
<contactref element="X1" pad="6"/>
<contactref element="JP1" pad="6"/>
<wire x1="12.192" y1="10.795" x2="14.605" y2="10.795" width="0.5" layer="16"/>
<wire x1="14.605" y1="10.795" x2="16.51" y2="8.89" width="0.5" layer="16"/>
<wire x1="16.51" y1="8.89" x2="17.78" y2="8.89" width="0.5" layer="16"/>
<wire x1="9.875" y1="14.865" x2="16.25" y2="14.865" width="0.3048" layer="16"/>
<wire x1="16.25" y1="14.865" x2="18.415" y2="12.7" width="0.3048" layer="16"/>
<wire x1="18.415" y1="12.7" x2="22.86" y2="12.7" width="0.25" layer="16"/>
<wire x1="22.86" y1="12.7" x2="23.495" y2="12.065" width="0.3048" layer="16"/>
<wire x1="23.495" y1="12.065" x2="23.495" y2="9.525" width="0.3048" layer="16"/>
<wire x1="23.495" y1="9.525" x2="22.86" y2="8.89" width="0.3048" layer="16"/>
<wire x1="22.86" y1="8.89" x2="20.955" y2="8.89" width="0.3048" layer="16"/>
</signal>
<signal name="N$7">
<contactref element="X1" pad="7"/>
<contactref element="JP1" pad="7"/>
<wire x1="9.652" y1="9.525" x2="13.335" y2="9.525" width="0.5" layer="16"/>
<wire x1="13.335" y1="9.525" x2="16.51" y2="6.35" width="0.5" layer="16"/>
<wire x1="16.51" y1="6.35" x2="17.78" y2="6.35" width="0.5" layer="16"/>
<wire x1="8.095" y1="15.885" x2="11.42" y2="15.885" width="0.25" layer="1"/>
<wire x1="11.42" y1="15.885" x2="14.605" y2="12.7" width="0.3048" layer="1"/>
<wire x1="14.605" y1="12.7" x2="14.605" y2="10.16" width="0.3048" layer="1"/>
<wire x1="14.605" y1="10.16" x2="18.415" y2="6.35" width="0.3048" layer="1"/>
<wire x1="18.415" y1="6.35" x2="20.955" y2="6.35" width="0.3048" layer="1"/>
</signal>
<signal name="N$8">
<contactref element="X1" pad="8"/>
<contactref element="JP1" pad="8"/>
<wire x1="12.192" y1="8.255" x2="12.192" y2="6.858" width="0.5" layer="16"/>
<wire x1="12.192" y1="6.858" x2="15.24" y2="3.81" width="0.5" layer="16"/>
<wire x1="15.24" y1="3.81" x2="17.78" y2="3.81" width="0.5" layer="16"/>
<wire x1="9.875" y1="16.905" x2="11.67" y2="16.905" width="0.3048" layer="1"/>
<wire x1="11.67" y1="16.905" x2="17.145" y2="11.43" width="0.3048" layer="1"/>
<wire x1="17.145" y1="11.43" x2="17.145" y2="9.525" width="0.3048" layer="1"/>
<wire x1="17.145" y1="9.525" x2="19.05" y2="7.62" width="0.3048" layer="1"/>
<wire x1="19.05" y1="7.62" x2="22.86" y2="7.62" width="0.25" layer="1"/>
<wire x1="22.86" y1="7.62" x2="23.495" y2="6.985" width="0.3048" layer="1"/>
<wire x1="23.495" y1="6.985" x2="23.495" y2="4.445" width="0.3048" layer="1"/>
<wire x1="23.495" y1="4.445" x2="22.86" y2="3.81" width="0.3048" layer="1"/>
<wire x1="22.86" y1="3.81" x2="20.955" y2="3.81" width="0.3048" layer="1"/>
</signal>
<signal name="X2_1">
<contactref element="JP2" pad="1"/>
<contactref element="X2" pad="1"/>
<wire x1="41.148" y1="17.145" x2="41.148" y2="17.272" width="0.5" layer="1"/>
<wire x1="41.148" y1="17.272" x2="36.83" y2="21.59" width="0.5" layer="1"/>
<wire x1="36.83" y1="21.59" x2="33.02" y2="21.59" width="0.5" layer="1"/>
<wire x1="39.37" y1="21.59" x2="46.91" y2="21.59" width="0.3048" layer="16"/>
<wire x1="46.91" y1="21.59" x2="52.23" y2="16.27" width="0.3048" layer="16"/>
</signal>
<signal name="N$10">
<contactref element="JP2" pad="2"/>
<contactref element="X2" pad="2"/>
<wire x1="38.608" y1="15.875" x2="35.433" y2="19.05" width="0.5" layer="1"/>
<wire x1="35.433" y1="19.05" x2="33.02" y2="19.05" width="0.5" layer="1"/>
<wire x1="39.37" y1="19.05" x2="46.65" y2="19.05" width="0.3048" layer="16"/>
<wire x1="46.65" y1="19.05" x2="50.45" y2="15.25" width="0.3048" layer="16"/>
</signal>
<signal name="N$11">
<contactref element="JP2" pad="3"/>
<contactref element="X2" pad="3"/>
<wire x1="41.148" y1="14.605" x2="36.195" y2="14.605" width="0.5" layer="1"/>
<wire x1="36.195" y1="14.605" x2="34.29" y2="16.51" width="0.5" layer="1"/>
<wire x1="34.29" y1="16.51" x2="33.02" y2="16.51" width="0.5" layer="1"/>
<wire x1="52.23" y1="14.23" x2="48.635" y2="14.23" width="0.25" layer="16"/>
<wire x1="48.635" y1="14.23" x2="46.355" y2="16.51" width="0.3048" layer="16"/>
<wire x1="46.355" y1="16.51" x2="39.37" y2="16.51" width="0.3048" layer="16"/>
</signal>
<signal name="N$12">
<contactref element="JP2" pad="4"/>
<contactref element="X2" pad="4"/>
<wire x1="38.608" y1="13.335" x2="34.925" y2="13.335" width="0.5" layer="1"/>
<wire x1="34.925" y1="13.335" x2="34.29" y2="13.97" width="0.5" layer="1"/>
<wire x1="34.29" y1="13.97" x2="33.02" y2="13.97" width="0.5" layer="1"/>
<wire x1="50.45" y1="13.21" x2="44.575" y2="13.21" width="0.3048" layer="16"/>
<wire x1="44.575" y1="13.21" x2="43.815" y2="13.97" width="0.3048" layer="16"/>
<wire x1="43.815" y1="13.97" x2="39.37" y2="13.97" width="0.3048" layer="16"/>
<wire x1="38.735" y1="13.97" x2="39.37" y2="13.97" width="0.3048" layer="16"/>
</signal>
<signal name="N$13">
<contactref element="JP2" pad="5"/>
<contactref element="X2" pad="5"/>
<wire x1="41.148" y1="12.065" x2="34.925" y2="12.065" width="0.5" layer="1"/>
<wire x1="34.925" y1="12.065" x2="34.29" y2="11.43" width="0.5" layer="1"/>
<wire x1="34.29" y1="11.43" x2="33.02" y2="11.43" width="0.5" layer="1"/>
<wire x1="52.23" y1="12.19" x2="43.94" y2="12.19" width="0.25" layer="16"/>
<wire x1="43.94" y1="12.19" x2="43.815" y2="12.065" width="0.25" layer="16" curve="90"/>
<wire x1="43.815" y1="12.065" x2="43.18" y2="11.43" width="0.3048" layer="16"/>
<wire x1="43.18" y1="11.43" x2="39.37" y2="11.43" width="0.3048" layer="16"/>
</signal>
<signal name="N$14">
<contactref element="JP2" pad="6"/>
<contactref element="X2" pad="6"/>
<wire x1="38.608" y1="10.795" x2="36.195" y2="10.795" width="0.5" layer="1"/>
<wire x1="36.195" y1="10.795" x2="34.29" y2="8.89" width="0.5" layer="1"/>
<wire x1="34.29" y1="8.89" x2="33.02" y2="8.89" width="0.5" layer="1"/>
<wire x1="39.37" y1="8.89" x2="43.18" y2="8.89" width="0.3048" layer="16"/>
<wire x1="43.18" y1="8.89" x2="45.46" y2="11.17" width="0.3048" layer="16"/>
<wire x1="45.46" y1="11.17" x2="50.45" y2="11.17" width="0.3048" layer="16"/>
</signal>
<signal name="N$15">
<contactref element="JP2" pad="7"/>
<contactref element="X2" pad="7"/>
<wire x1="41.148" y1="9.525" x2="37.465" y2="9.525" width="0.5" layer="1"/>
<wire x1="37.465" y1="9.525" x2="34.29" y2="6.35" width="0.5" layer="1"/>
<wire x1="34.29" y1="6.35" x2="33.02" y2="6.35" width="0.5" layer="1"/>
<wire x1="52.23" y1="10.15" x2="48.885" y2="10.15" width="0.25" layer="16"/>
<wire x1="48.885" y1="10.15" x2="45.085" y2="6.35" width="0.3048" layer="16"/>
<wire x1="45.085" y1="6.35" x2="39.37" y2="6.35" width="0.3048" layer="16"/>
</signal>
<signal name="N$16">
<contactref element="JP2" pad="8"/>
<contactref element="X2" pad="8"/>
<wire x1="38.608" y1="8.255" x2="38.608" y2="8.128" width="0.5" layer="1"/>
<wire x1="38.608" y1="8.128" x2="34.29" y2="3.81" width="0.5" layer="1"/>
<wire x1="34.29" y1="3.81" x2="33.02" y2="3.81" width="0.5" layer="1"/>
<wire x1="39.37" y1="3.81" x2="45.13" y2="3.81" width="0.3048" layer="16"/>
<wire x1="45.13" y1="3.81" x2="50.45" y2="9.13" width="0.3048" layer="16"/>
</signal>
</signals>
</board>

105
rj45-jumper-box/rj45_jumper_box.sch
View File

@ -73,6 +73,33 @@
<libraries>
<library name="stewart-rj45">
<packages>
<package name="RC01133">
<description>Wen ZhouyRut Chuan Electronic C., Ltd.
RCH-56-31
RC01133</description>
<wire x1="-8.15" y1="7.95" x2="-6.35" y2="7.95" width="0.127" layer="21"/>
<wire x1="-6.35" y1="7.95" x2="6.35" y2="7.95" width="0.127" layer="21"/>
<wire x1="6.35" y1="7.95" x2="8.15" y2="7.95" width="0.127" layer="21"/>
<wire x1="8.15" y1="7.95" x2="8.15" y2="-7.95" width="0.127" layer="21"/>
<wire x1="8.15" y1="-7.95" x2="-8.15" y2="-7.95" width="0.127" layer="21"/>
<wire x1="-8.15" y1="-7.95" x2="-8.15" y2="7.95" width="0.127" layer="21"/>
<hole x="-6.3" y="2.7" drill="3.25"/>
<hole x="6.3" y="2.7" drill="3.25"/>
<pad name="SHLD1" x="-8.05" y="-0.73" drill="1.6"/>
<pad name="SHLD2" x="8.05" y="-0.73" drill="1.6"/>
<wire x1="-6.35" y1="7.95" x2="-6.35" y2="0" width="0.127" layer="21"/>
<wire x1="-6.35" y1="0" x2="6.35" y2="0" width="0.127" layer="21"/>
<wire x1="6.35" y1="0" x2="6.35" y2="7.95" width="0.127" layer="21"/>
<pad name="1" x="-3.57" y="0.16" drill="0.9"/>
<pad name="2" x="-2.55" y="-1.62" drill="0.9"/>
<pad name="3" x="-1.53" y="0.16" drill="0.9"/>
<pad name="4" x="-0.51" y="-1.62" drill="0.9"/>
<pad name="5" x="0.51" y="0.16" drill="0.9"/>
<pad name="6" x="1.53" y="-1.62" drill="0.9"/>
<pad name="7" x="2.55" y="0.16" drill="0.9"/>
<pad name="8" x="3.57" y="-1.62" drill="0.9"/>
<text x="-8.89" y="-7.62" size="1.27" layer="25" font="vector" ratio="14" rot="R90">&gt;NAME</text>
</package>
<package name="SS-7188S-A-NF">
<description>Bel Stewart SS-7188S-A-NF</description>
<wire x1="-7.975" y1="8.142" x2="7.975" y2="8.142" width="0.2032" layer="21"/>
@ -98,6 +125,31 @@
<hole x="-5.715" y="-1.778" drill="3.2512"/>
<hole x="5.715" y="-1.778" drill="3.2512"/>
</package>
<package name="SS-7188VS-A-NF-50">
<description>Stewart 8p8c RJ45 vertical mounted shielded jack, non-flange</description>
<wire x1="-8.225" y1="10.49" x2="8.225" y2="10.49" width="0.2032" layer="21"/>
<wire x1="8.225" y1="10.49" x2="8.225" y2="5.24" width="0.2032" layer="21"/>
<wire x1="8.225" y1="5.24" x2="8.225" y2="2.64" width="0.2032" layer="51"/>
<wire x1="8.225" y1="2.64" x2="8.225" y2="-6.78" width="0.2032" layer="21"/>
<wire x1="8.225" y1="-6.78" x2="-8.225" y2="-6.78" width="0.2032" layer="21"/>
<wire x1="-8.225" y1="-6.78" x2="-8.225" y2="2.64" width="0.2032" layer="21"/>
<wire x1="-8.225" y1="2.64" x2="-8.225" y2="5.14" width="0.2032" layer="51"/>
<wire x1="-8.225" y1="5.14" x2="-8.225" y2="10.49" width="0.2032" layer="21"/>
<pad name="S1" x="-7.875" y="3.89" drill="1.6" diameter="2.2"/>
<pad name="S2" x="7.875" y="3.89" drill="1.6" diameter="2.2"/>
<pad name="8" x="4.445" y="8.89" drill="0.9" diameter="1.5"/>
<pad name="7" x="3.175" y="6.36" drill="0.9" diameter="1.5"/>
<pad name="6" x="1.905" y="8.89" drill="0.9" diameter="1.5"/>
<pad name="5" x="0.635" y="6.36" drill="0.9" diameter="1.5"/>
<pad name="4" x="-0.635" y="8.89" drill="0.9" diameter="1.5"/>
<pad name="3" x="-1.905" y="6.35" drill="0.9" diameter="1.5"/>
<pad name="2" x="-3.175" y="8.89" drill="0.9" diameter="1.5"/>
<pad name="1" x="-4.445" y="6.35" drill="0.9" diameter="1.5" shape="square"/>
<text x="-3.81" y="-8.375" size="1.27" layer="25" font="vector">&gt;NAME</text>
<text x="-3.81" y="-5.635" size="1.27" layer="27" font="vector">&gt;VALUE</text>
<hole x="-5.715" y="0" drill="3.2512"/>
<hole x="5.715" y="0" drill="3.2512"/>
</package>
</packages>
<symbols>
<symbol name="SS-7188S-A-NF">
@ -132,13 +184,13 @@
</symbol>
</symbols>
<devicesets>
<deviceset name="SS-7188S-A-NF">
<description>Bel Stewart SS-7188S-A-NF RJ45 connector</description>
<deviceset name="RJ45">
<description>RJ45 connector 8P8C Stewart shielded horizontal</description>
<gates>
<gate name="G$1" symbol="SS-7188S-A-NF" x="5.08" y="-2.54"/>
<gate name="G$1" symbol="SS-7188S-A-NF" x="2.54" y="0"/>
</gates>
<devices>
<device name="" package="SS-7188S-A-NF">
<device name="-SS-718S-A-NF" package="SS-7188S-A-NF">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
@ -152,10 +204,41 @@
<connect gate="G$1" pin="S2" pad="S2"/>
</connects>
<technologies>
<technology name="">
<attribute name="MANUFACTURER" value="Bel Stewart" constant="no"/>
<attribute name="OC_DIGIKEY" value="380-1047-ND"/>
</technology>
<technology name=""/>
</technologies>
</device>
<device name="-SS-7188VS-A-NF-50" package="SS-7188VS-A-NF-50">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
<connect gate="G$1" pin="5" pad="5"/>
<connect gate="G$1" pin="6" pad="6"/>
<connect gate="G$1" pin="7" pad="7"/>
<connect gate="G$1" pin="8" pad="8"/>
<connect gate="G$1" pin="S1" pad="S1"/>
<connect gate="G$1" pin="S2" pad="S2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="-RC01133" package="RC01133">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
<connect gate="G$1" pin="3" pad="3"/>
<connect gate="G$1" pin="4" pad="4"/>
<connect gate="G$1" pin="5" pad="5"/>
<connect gate="G$1" pin="6" pad="6"/>
<connect gate="G$1" pin="7" pad="7"/>
<connect gate="G$1" pin="8" pad="8"/>
<connect gate="G$1" pin="S1" pad="SHLD1"/>
<connect gate="G$1" pin="S2" pad="SHLD2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
@ -424,6 +507,7 @@ DIN A4, landscape with extra doc field</description>
</library>
</libraries>
<attributes>
<attribute name="REVISION" value="v2"/>
</attributes>
<variantdefs>
</variantdefs>
@ -432,8 +516,8 @@ DIN A4, landscape with extra doc field</description>
</class>
</classes>
<parts>
<part name="X1" library="stewart-rj45" deviceset="SS-7188S-A-NF" device=""/>
<part name="X2" library="stewart-rj45" deviceset="SS-7188S-A-NF" device=""/>
<part name="X1" library="stewart-rj45" deviceset="RJ45" device="-RC01133"/>
<part name="X2" library="stewart-rj45" deviceset="RJ45" device="-RC01133"/>
<part name="FRAME1" library="frames" deviceset="DINA4_L" device=""/>
<part name="JP1" library="pinhead" deviceset="PINHD-1X8" device=""/>
<part name="JP2" library="pinhead" deviceset="PINHD-1X8" device=""/>
@ -441,6 +525,7 @@ DIN A4, landscape with extra doc field</description>
<sheets>
<sheet>
<plain>
<text x="256.54" y="7.62" size="3.81" layer="97" ratio="11">&gt;REVISION</text>
</plain>
<instances>
<instance part="X1" gate="G$1" x="35.56" y="55.88" rot="MR0"/>