* Added Link to PBX4LINUX website isdn.jolly.de
* Removed broken link to kisdn homepage (could not find the correct one
anywhere, if anyone knows where to find it please let me know)
* fixed broken url reference to www.asterisk.org
* added hint that PBX may not like selecting a preferred B channel
* added hint that EAZ mapping may be used for dialin
* Removed reference to news group an isdn4linux
* Fixed link to i4lfax project according to link on www.isdn4linux.de
* Add ideas on fax extension to mISDN
* Refer to whitepaper by Germaschewski on isdn4linux (Linux congress 2002)
* Added online links to ct article 3/2004
* More mentioning of www.asterisk.org
* Included some information on new mISDN driver for kernel 2.6.x
(please review especially question config_misdn - I'm not sure whether
my writing is 100% correct)
* Added link to software Asterisk for sending/receiving SMS
* Added link to ISDN Sniffer
* Added link to http://www.staschke.de/linux/anwahl.html (how to
trigger internet dialout by incoming call from mobile phone)
* Added reference to ct 3/2004 (isdn4linux article) and 9/2004
(article on pbx4linux)
* Added Diva 2.02 as supported hardware
* Added hint about PBX4Linux for NTBA mode of hfc hardware
* isdnlog no longer complains about unexpected PBX frames
* Added link on how to configure gentoo:
http://forums.gentoo.org/viewtopic.php?t=29991
* Added link to linecontrol
* More clarification on the ringing mechanism of the ttyI* devices
(for the same MSN, only one device will receive rings)
* File sharing and backdoor activities can be ignored for connection
timeout by using the active-filter option
* fixed outdated hint to de.alt.comm.isdn4linux
* fixed spelling for switzerland
* updated hint on MSNs for switzerland
* fixed broken url to www.wurtel.cistron.nl/i4l-howto-uk.html
* Microsoft callback (CBCP) is supported. Added a few more hints on how to
configure it.
* SPID has to be provided with colon separated from the telephone number
* added Teles 16.3 ISA and Sedlbauer Speedfax+ PCI as certified cards
* added comments that within EC certification for the driver is not needed
any more.
* added hints that cards with HFC chips are a bit more difficult to with
older hardware
* added additional question on why to use the RST-provoking mode/patch
* changed url of German translation of FAQ to www.wolf-b.de
* added links to [ixi|capi4linux|www].thepenguin.de
* AVM Fritz PCI v2 now supported
* NETspider U card now supported
* HFC-S+, HFC-SP/PCMCIA cards, HFC-USB ISDN TAs now supported
* Xircom Cardbus Eth10/100+ (PCMCIA) not supported except as terminal adapter
* Usage of capi driver is optional
* added question on how to see number of packets in Hisax with invalid CRC
* better trick to prevent Samba to trigger unwanted dialouts
* rates4linux url now sourceforge.net/projects/rates4linux
* logging stuff like reversed card and HFC card D channel logging only works
for BRI interface
Long awaited update, many small accumulated changes:
* Corrected url on project for passive card faxing
* Add hint to capidivert
* Add ST5481 based USB cards as supported
* Teles PCMCIA, 16.3c, PCI, S0Box are not experimental any more
* Some cards only work as modules
* More info on Sedlbauer cards
* Hint to configure Sedlbauer card with Hylafax parameter Class1SwitchingDelay
* Fritz!PCI card 2.0 now supported, but not thoroughly tested
* Fritz AVM firmware: get via perl script from calle.in-berlin.de
* Correct link to calle.in-berlin.de/pub/capi4linux
* Read-only card is possible next to point-to-point connection, if RX
is disconnected
* Corrected typo for switching from X.75 to HDLC
* Add dhcpd as reason for dod disaster
* More workarounds to avoid dod disaster with named and samba, correct typo
* ttyI* device can not accept both digital and analog modem dialins
* Can set fixed ip address per user in pap/chap-secrets
* For D-channel logging your card should be HiSax type 35 or 37
* HFC-S chipset cards are now certified
* Fritz! PCI card 2.0 will not be supported any time soon
* Added link to www.fli4l.de (one-floppy-disk isdn router software)
* Brazil: can also use Teles 16.3c
* Give Traverse Technologies (www.ttcomms.com) credit for helping to
get NI-1 support into HiSax
Small update:
* Can not pretend to be PBX in NT mode
* AVM A1+ not supported
* PBX may add 0 on incoming calls
* find out dynamic ip address in ip-up
* Cisco keepalive works
* MPPP support needs to be compiled into modules
* Microsoft Callback (CBCP) is not supported
* NI-1 has been implemented, however unknown whether 5ESS works in NorthAmerica.
* added link to homepage of maKs (configuration software for Ackermann
Euracom)
* more background & configuration information on dialin via GSM phone
* added reference to article 'Des Surfers Bastelstunde' in ct 7/2001.
hessler