Doxygen was confused by duplicated documentation for both
definition and declaration of rate_ctr_for_each_counter().
Moreover, both variants contained some mistakes.
Let's avoid this duplication and keep the only (corrected) one.
Change-Id: Icca2d4a95bd5f96ae85a86909ec90fb8677cacf3
core/msgb.h:414: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_pull_to_l2(struct msgb *msg)
core/msgb.h:399: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_pull_to_l3(struct msgb *msg)
core/msgb.h:351: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u16(struct msgb *msg, uint16_t word)
core/msgb.h:361: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u32(struct msgb *msg, uint32_t word)
core/msgb.h:341: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u8(struct msgb *msg, uint8_t word)
Change-Id: I5d660933ecfa89c631319eccf9e3d5c1986ec8ff
Thanks to the following Doxygen warning:
msgb.h:XXX: warning: The following parameters of
msgb_eq_l2(msg1, msgb2, len) are not documented:
parameter 'msgb2'
parameter 'len'
it was discovered that parameter 'len' is not required at all.
It basically doesn't make any sense to pass any length value,
because it can be calculated using msgb_length().
Let's drop this parameter. Given that this part of the API was
broken so far (see I1079d629abdb8770eef6be7341e586a933cd9cca),
it should be more or less safe to do this.
Change-Id: Icd9b72eb6bfa9628ff1ed2f948b57058551a4328
Neither Doxygen documentation of the msgb data comparison helpers,
nor their actual definitions does refer msgb2. Instead, 'msg2' is
referenced in both cases. This was discovered while investigating
the following Doxygen warnings:
msgb.h:XXX: warning: argument 'msg2' of command @param is not
found in the argument list of
msgb_eq(msg1, msgb2, len)
msgb.h:XXX: warning: The following parameters of
msgb_eq_l2(msg1, msgb2, len) are not documented:
parameter 'msgb2'
parameter 'len'
Due to this bug it was impossible to use the affected macros,
because 'msg2' was not listed in their parameters. Having the
unit test coverage would spot this bug at the beginning!
Change-Id: I1079d629abdb8770eef6be7341e586a933cd9cca
- drop incorrect \ref and \a references;
- add missing documentation to LLIST_HEAD_INIT;
- document parameter 'member' of llist_entry();
- turn @argument naming into a valid \param format;
- fix 'type *' vs llist_head loop counter confusion;
- capitalize and dot-terminate all sentences.
Change-Id: Iac67bdb9d5fbf7c222d04858967337f2428d6a94
The naming of these constants dates back to when the code was private
within OpenBSC. Everything else was renamed (bsc_fd -> osmo_fd) at
the time, but somehow the BSC_FD_* defines have been missed at the
time.
Keep compatibility #defines around, but allow us to migrate the
applications to a less confusing naming meanwhile.
Change-Id: Ifae33ed61a7cf0ae54ad487399e7dd2489986436
The function gsm0808_sc_cfg_from_gsm48_mr_cfg() takes an S15 to S0
bitmask and converts that bitmask into an AMR multirate configuration
struct.
Unfortunately the current implementation implements 3GPP TS 28.062,
Table 7.11.3.1.3-2 wrongly in some aspects. Lets fix this.
- Fix wrong interpretation of the bitpatterns
- 5,15K is invalid and must never be selected
- Make sure that no more than 4 rates are selected in the active set
- Extend unit-test
Change-Id: I6fd7f4073b84093742c322752f2fd878d1071e15
Related: SYS#4470
CGI to Cell ID: for example, for Paging, osmo-msc has a CGI for a subscriber
and needs to send out a Cell Identifier IE. Makes sense to add this conversion
here.
Cell ID to CGI: for a Layer 3 Complete, a subscriber sends the current cell in
the form of a Cell Identifier, which we store as a CGI, if necessary enriched
with the local PLMN.
Add enum with bitmask values to identify parts of a CGI, for the return value
of gsm0808_cell_id_to_cgi(). Can't use enum CELL_IDENT for that, because it
doesn't have a value for just a PLMN (and is not a bitmask).
Change-Id: Ib9af67b100c4583342a2103669732dab2e577b04
During FSM design for osmo-msc, I noticed that the current behavior that
keep_timer=true doesn't guarantee a running timer can make FSM design a bit
complex, especially when using osmo_tdef for timeout definitions.
A desirable keep_timer=true behavior is one that keeps the previous timer
running, but starts a timer if no timer is running yet.
The simplest example is: a given state repeatedly transitions back to itself,
but wants to set a timeout only on first entering, avoiding to restart the
timeout on re-entering.
Another example is a repeated transition between two or more states, where the
first time we enter this group a timeout should start, but it should not
restart from scratch on every transition.
When using osmo_tdef timeout definitions for this, so far separate meaningless
states have to be introduced that merely set a fixed timeout.
To simplify, add osmo_fsm_inst_state_chg_keep_or_start_timer(), and use this in
osmo_tdef_fsm_inst_state_chg() when both keep_timer == true *and* T != 0.
In tdef_test.ok, the changes show that on first entering state L, the previous
T=1 is now kept with a large remaining timeout. When entering state L from O,
where no timer was running, this time L's T123 is started.
Change-Id: Id647511a4b18e0c4de0e66fb1f35dc9adb9177db
fi->T values are int, i.e. can be negative. Do not log them as unsigned, but
define a distinct timer class "Xnnnn" for negative T values: i.e. for T == -1,
print "Timeout of X1" instead of "Timeout of T4294967295".
The negative T timer number space is useful to distinguish freely invented
timers from proper 3GPP defined T numbers. So far I was using numbers like
T993210 or T9999 for invented T, but X1, X2 etc. is a better solution. This way
we can make sure to not accidentally define an invented timer number that
actually collides with a proper 3GPP specified timer number that the author was
not aware of at the time of writing.
Add OSMO_T_FMT and OSMO_T_FMT_ARGS() macros as standardized timer number print
format. Use that in fsm.c, tdef_vty.c, and adjust vty tests accordingly.
Mention the two timer classes in various API docs and VTY online-docs.
Change-Id: I3a59457623da9309fbbda235fe18fadd1636bff6
Add a flag that adds timeout info to osmo_fsm_inst state change logging.
To not affect unit testing, make this an opt-in feature that is disabled by
default -- mostly because osmo_fsm_inst_state_chg_keep_timer() will produce
non-deterministic logging depending on timing (logs remaining time).
Unit tests that don't verify log output and those that use fake time may also
enable this feature. Do so in fsm_test.c.
The idea is that in due course we will add osmo_fsm_log_timeouts(true) calls to
all of our production applications' main() initialization.
Change-Id: I089b81021a1a4ada1205261470da032b82d57872
The NS implementation part of the Gb implementation libosmogb
so far implemented a rather classic dialect of Gb, with lots of
heritage to FR (Frame Relay) transports. At least since Release 6
of the NS specification, there's an IP Sub-Network Service (SNS),
which
* permits for dynamic configuration of IP endpoints and their NS-VCs
* abandons the concept of a NSVCI on IP transport
* forbids the use of RESET/BLOCK/UNBLOCK procedures on IP transport
This commit introduces BSS-side IP-SNS support to libosmogb in a
minimally invasive way. It adds a corresponding SNS FSM to each NS
instance, and implements the new SIZE/CONFIG/ADD/DELETE/CHANGE_WEIGHT
procedures very closely aligned with the spec.
In order to use the SNS flavor (rather than the classic one),
a BSS implementation should use gprs_ns_nsip_connect_sns() instead
of the existing gprs_ns_nsip_connect().
This implementation comes with a set of TTCN-3 tests in
PCU_Tests_RAW_SNS.ttcn, see Change-ID
I0fe3d4579960bab0494c294ec7ab8032feed4fb2 of osmo-ttcn3-hacks.git
Closes: OS#3372
Closes: OS#3617
Change-Id: I84786c3b43a8ae34ef3b3ba84b33c90042d234ea
Modern NS specifications contain a SNS (Sub Network Service) for
negotiating IP/port/weight parameters of NS-over-IP links dynamically.
This patch adds message encoding routines for SNS-CONFIG, SNS-SIZE
and their respective acknowledgements.
Related: OS#3372
Change-Id: I5c47e1c3c10deb89a7470ee2c03adfc174accc93
It should be large enough to prepend a struct osmo_scu_prim to pass down an
SCCP stack (see libosmo-sccp). 264 should suffice, but pick the next larger
power-of-two instead.
In osmo-msc, I would like to prepend an osmo_prim to the msgb created by
gsm0808 API, but turns out the headroom is too small:
msgb(0x61700001b660): Not enough headroom msgb_push (126 < 264)
Instead of always copying a msgb that has just that instant been created, it
makes more sense to allocate sufficient headroom in the first place.
Change-Id: I95729991eb49555f8bba60c5dc916131b03b6cf2
Add functions to dump LCLS (without GCR) and GCR. Dumping entire struct
results in inconveniently long string hence the separate functions. Both
use talloc functions so they expect caller to take care of providing
proper allocation context and freeing memory.
Change-Id: Ic3609224c8f3282d667e75f68bc20327e36eb9e6
The symbols for those functions were always exported, but we
somehow didn't declare them in gprs_ns.h
Change-Id: Ib073e9c93fcdf408b63000182e90aabce37f687e
We are using macros like this or different workarounds in libmsc. In the course
of implementing inter-MSC handover, I am encountering yet another such
situation of appending multiple strings to a limited char buffer. Standardize.
Add a unit test to utils_test.c.
Change-Id: I2497514e26c5e7a5d88985fc7e58343be1a027b2
This is from TS 08.08 3.2.2.11 directly. The choices for Data mode
and Speech mode were already present, but not for Signalling mode
Change-Id: I9e24841ea877a9a78dc4d2bd14cbf60c4bea79a6
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
In OsmoMSC, it's required to be able to specify a particular GSM 04.07
transaction ID for GSM 04.80 Release complete message instead of the
hard-coded value, that is used gsm0480_create_ussd_release_complete().
Let's finally deprecate gsm0480_create_ussd_release_complete(), and
introduce a new function without USSD prefix, as this message
is also used in other "structured" supplementary services.
Change-Id: Ie3ac85fcef90a5e532334ba3482804d5305c88d7
When a call that was established in a CSFB context ends the CLEAR
COMMAND that is send from the BSC to the MSC should contain a CSFB
indication IE, which consists of just the IE byte itsslef. This
additional IE tells the BSC to include other CSFB related IEs into the
RR Release message.
Change-Id: Id8a75e1da2d5f520064666e4ee413d1c91da6ae3
Related: OS#3778
This is similar to msgb_tailroom(): It returns the amount of space
left at the end of the bit vector (compared to the current cursor).
The function returns the number of bits left in the bitvec.
Change-Id: I8980a6b6d1973b67a2d9ad411c878d956fb428d1
Move T_def from osmo-bsc to libosmocore as osmo_tdef. Adjust naming to be more
consistent. Upgrade to first class API:
- add timer grouping
- add generic vty support
- add mising API doc
- add C test
- add VTY transcript tests, also as examples for using the API
From osmo_fsm_inst_state_chg() API doc, cross reference to osmo_tdef API.
The root reason for moving to libosmocore is that I want to use the
mgw_endpoint_fsm in osmo-msc for inter-MSC handover, and hence want to move the
FSM to libosmo-mgcp-client. This FSM uses the T_def from osmo-bsc. Though the
mgw_endpoint_fsm's use of T_def is minimal, I intend to use the osmo_tdef API
in osmo-msc (and probably elsewhere) as well. libosmocore is the most sensible
place for this.
osmo_tdef provides:
- a list of Tnnnn (GSM) timers with description, unit and default value.
- vty UI to allow users to configure non-default timeouts.
- API to tie T timers to osmo_fsm states and set them on state transitions.
- a few standard units (minute, second, millisecond) as well as a custom unit
(which relies on the timer's human readable description to indicate the
meaning of the value).
- conversion for standard units: for example, some GSM timers are defined in
minutes, while our FSM definitions need timeouts in seconds. Conversion is
for convenience only and can be easily avoided via the custom unit.
By keeping separate osmo_tdef arrays, several groups of timers can be kept
separately. The VTY tests in tests/tdef/ showcase different schemes:
- tests/vty/tdef_vty_test_config_root.c:
Keep several timer definitions in separately named groups: showcase the
osmo_tdef_vty_groups*() API. Each timer group exists exactly once.
- tests/vty/tdef_vty_test_config_subnode.c:
Keep a single list of timers without separate grouping.
Put this list on a specific subnode below the CONFIG_NODE.
There could be several separate subnodes with timers like this, i.e.
continuing from this example, sets timers could be separated by placing
timers in specific config subnodes instead of using the global group name.
- tests/vty/tdef_vty_test_dynamic.c:
Dynamically allocate timer definitions per each new created object.
Thus there can be an arbitrary number of independent timer definitions, one
per allocated object.
T_def was introduced during the recent osmo-bsc refactoring for inter-BSC
handover, and has proven useful:
- without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be
programmed with the right timeout value, for all code paths that invoke this
state change. It is a likely source of errors to get one of them wrong. By
defining a T timer exactly for an FSM state, the caller can merely invoke the
state change and trust on the original state definition to apply the correct
timeout.
- it is helpful to have a standardized config file UI to provide user
configurable timeouts, instead of inventing new VTY commands for each
separate application of T timer numbers.
Change-Id: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5
Provide a va_list type vty_out() variant, to be able to pass on variable
arguments from other function signatures to vty_out().
This will be used by Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 for osmo_tdef.
Change-Id: Ie6e6f11a6b794f3cb686350c1ed678e4d5bbbb75
socket.h uses INET6_ADDRSTRLEN without including arpa/inet.h where it's
defined which might break external users of socket.h
Fix this by adding missing include. The error was introduced in
64b51eb68b
Change-Id: I2883addcb81cec038577e401e356e8f07a947d4c
Replace osmo_gsup_get_err_msg_type() with a wrapper to
OSMO_GSUP_TO_MSGT_ERROR(). This macro assumes, that all error messages
are (request message | 0x000001). Add a big comment header for
osmo_gsup_message_type, describing this already implicitly followed rule
and therefore making it explicit.
With this change, we don't need to maintain the request -> error message
mapping in osmo_gsup_get_err_msg_type() anymore.
Related: Iec1b4ce4b7d8eb157406f006e1c4241e8fba2cd6 (osmo-gsm-manuals)
Change-Id: I46d9f2327791978710e2f90b4d28a3761d723d8f
osmo-bsc and osmo-msc implement identical Classmark structures. It makes sense
to define once near the gsm48 protocol definitions.
Also move along some generic Classmark API from osmo-msc.
Change-Id: Ifd27bab0380f7ad0c44c719aa6c8bd62cf7b034c
Add osmo_hexdump_buf() as an all-purpose hexdump function, which all other
osmo_hexdump_*() implementations now call. It absorbs the static
_osmo_hexdump(). Add tests for osmo_hexdump_buf().
Rationale: recently during patch review, a situation came up where two hexdumps
in a single printf would have been useful. Now I've faced a similar situation
again, in ongoing development. So I decided it is time to provide this API.
The traditional osmo_hexdump() API returns a non-const char*, which should
probably have been a const instead. Particularly this new function may return a
string constant "" if the buf is NULL or empty, so return const char*. That is
why the older implementations calling osmo_hexdump_buf() separately return the
buffer instead of the const return value directly.
Change-Id: I590595567b218b24e53c9eb1fd8736c0324d371d
Add
* osmo_lai_cmp() (to use in gsm0808_cell_id_u_matches())
* osmo_cgi_cmp() (to use in gsm0808_cell_id_u_matches())
* gsm0808_cell_id_u_match() (to re-use for single IDs and lists)
* gsm0808_cell_ids_match()
* gsm0808_cell_id_matches_list()
* Unit tests in gsm0808_test.c
Rationale:
For inter-BSC handover, it is interesting to find matches between *differing*
Cell Identity kinds. For example, if a cell as CGI 23-42-3-5, and a HO for
LAC-CI 3-5 should be handled, we need to see the match.
This is most interesting for osmo-msc, i.e. to direct the BSSMAP Handover
Request towards the correct BSC or MSC.
It is also interesting for osmo-bsc's VTY interface, to be able to manage
cells' neighbors and to trigger manual handovers by various Cell Identity
handles, as the user would expect them.
Change-Id: I5535f0d149c2173294538df75764dd181b023312
The longest BCd-digit type identity is the IMEISV with 16, so there's
no point in trying to parse up to 255 decimal digits, which will do
nothing but to overflow the caller-provided output buffer.
Let's also clearly define the required minimum size of the output
buffer and add a reltead #define for it.
Change-Id: Ic8488bc7f77dc9182e372741b88f0f06100dddc9
This resolves an issue introduced in 84fb5bb6a0
when msgb_wrap_with_TL() was introduced as an inline function with
*exactly the same name* as in osmo-msc.git and openbsc.git. We *NEVER*
do something like this. Functions moved from applications to library
*MUST* always be renamed. This has been the case for almost a decade
now.
With this subsequent change we make sure the libosmocore function
has a different name and doesn't clash. After this commit, old
openbsc.git and osmo-bsc.git should again build fine.
Change-Id: If1e851ac605c8d2fde3da565b0bd674ea6350c2e
They only make sense in the context of LCLS so far - let's make sure
they're not used by external projects directly instead of gsm0808_*()
counterparts.
Change-Id: I4ae5a3472a20492d5f76170b722e4e2274a5c433
Most of the time we'll have GCR filled anyway so it make sense to have
it as static parameter instead of a pointer to separately allocated
structure. Update tests to cover both static and dynamic osmo_lcls
allocation variants.
Change-Id: I905c36d8455911c68c30bc429379b7313dd46aea
* add gsm0808_create_ass_compl2() with additional gsm0808_lcls_status
parameter and make gsm0808_create_ass_compl() into trivial wrapper
around it
* update tests accordingly
Change-Id: I547c6b8707123aa8c1ef636db88908df112d90a4
Related: OS#2487
The function osmo_sock_get_name_buf() can be used to write a string
representation to a user provided memory. Unfortunately the proper
length for the user provided memory is not obvious. To make using
osmo_sock_get_name_buf() more practical, add a define constant that
defines the length of the required memory. Also use this define in
socket.c.
Change-Id: If8be8c2c0d4935da17ab13b2c2127b719ceefbcc
Prepare handling multiple CM Service Requests in osmo-msc: an enum is more
clear than an int and #defines for passing around and count CM Service types.
Change-Id: I9c2a7adc45ab7a1a7519168e965e7d805e1481ff
Verify 14 digit and 15 digit IMEI strings. OsmoHLR will use the 14
digit version to check IMEIs before writing them to the DB.
Place the Luhn checksum code in a dedicated osmo_luhn() function, so
it can be used elsewhere.
Related: OS#2541
Change-Id: Id2d2a3a93b033bafc74c62e15297034bf4aafe61
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports osmo-bsc code for encoding SI rest octets.
The conversion was a bit tricky in some places because some
functions receive a 'struct gsm_bts' parameter in osmo-bsc.
In this libosmocore version, such functions expect parameters
which correspond to the individual fields of 'struct gsm_bts'
which are used by these functions.
Several structs from osmo-bsc's system_information.h are now
also declared in libosmocore headers, with an added osmo_ prefix
to avoid collisions with existing definitions in osmo-bsc.
Some helpers were ported from osmo-bsc's system_information.c
to libosmocore's gsm48_rest_octets.c. Contrary to osmo-bsc's
implementation they are now only visible within this file.
Unfortunately, this code ported from osmo-bsc lacks unit tests.
Change-Id: I47888965ab11bba1186c21987f1365c9270abeab
Related: OS#3075
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports one of the prerequisites for doing so:
osmo-bsc code for range-encoding ARFCNs, including tests.
An osmo_gsm48_ prefix has been prepended to public symbols in
order to avoid clashes with existing symbols in osmo-bsc code.
Change-Id: Ia220764fba451be5e975ae7c5eefb1a25ac2bf2c
Related: OS#3075
Note that OSMO_GSUP_IMEI_RESULT_ACK is 0 on the wire, although the
enum value is 1. Same with NACK (1 on wire, enum 2).
I had implemented enum osmo_gsup_imei_result after
enum osmo_gsup_cancel_type above, where this comment exists as well,
and I incorrectly assumed that enum osmo_gsup_cn_domain in the middle
was also implemented this way and therefore adding the comments to each
enum would be redundant. But for cn_domain, the values on the wire are
the same as the enum values.
Change-Id: If97c34f117bfaab2232bbb625e9d118c8f390e58
We have gsm48_mi_to_string() and osmo_bcd2str(), but still lack a function that
conveniently prints both MI type and value in one function call.
Related: http://people.osmocom.org/neels/mi_mi_mi.jpg
Change-Id: I7798c3ef983c2e333b2b9cbffef6f366f370bd81
Previously it could encode both incorrect values as well as incorrect
message. Let's fix this by explicitly checking for invalid values and
ensuring that at least one of the parameters is valid.
This function have no external or internal users so it's better to fix
type signature as well to match the rest of gsm0808_create_lcls_*().
Change-Id: I7b33a771acbd391c5f9a494d6450edb18511433f
In the MSC, we have RAN types GERAN_A and UTRAN_IU, now we need a similar enum
in osmo-hlr's GSUP client.
Naming: in the MAP specifications, the RAN type is mostly called RAT type,
(Radio Access Network vs. Radio Access Technology?). Since GSUP is more about
MAP messages, I'm calling the enum osmo_rat_type.
Rationale: osmo-msc and osmo-sgsn want to tell the osmo-hlr which RAT a
subscriber is calling on. A subsequent patch will extend the GSUP protocol and
add a RAT types IE.
Change-Id: I659687aef7a4d67ca372a39fef31dee07aed7631
Using an FSM instace's logging context is very useful. Sometimes it makes sense
to log something on a different logging category than the FSM definition's
default category.
For example, an MSC conn has aspects concerning MM, CC, RR, MGCP, ..., and
currently all of those log on DMM.
This came up in I358cfbaf0f44f25148e8b9bafcb9257b1952b35a, where I want to log
an MGCP event using a ran_conn context, and used the conn->fi->id. That of
course omits context like the current conn FSM state...
I remember at least one other place where I recently added logging using some
fi->id as context, so it might turn out useful in various places.
Change-Id: I11b182a03f5ecb6df7cd8f260757d3626c8e945d
The LOGPFSM macros are in such wide use that they should guard against a NULL
fi pointer. In case of NULL, default to subsys = DLGLOBAL, loglevel =
LOGL_ERROR and state = "fi=NULL".
Change-Id: I9eaf8b7e2cf1e450ae626cb2fc928862008f6233
In 3GPP TS 48.008 the Global Call Reference IE is only used in HANDOVER
REQUEST (§3.2.1.8) and ASSIGNMENT REQUEST (§3.2.1.1) messages which
also include LCLS Config and CSC parameters. Hence, there's no point in
using GCR encode/decode functions alone.
Introduce gsm0808_dec_lcls() and gsm0808_enc_lcls() as trivial wrappers
on top of GCR enc/dec routines which are made static. Adjust tests
accordingly. Test output intentionally left unchanged.
Change-Id: Icfbb2404e1a1d500243e2071173299b557369335
Instead of duplicating the fmt and args in LOGPFSML and LOGPFSMLSRC, rather
make LOGPFSML invoke LOGPFSMLSRC with __FILE__ and __LINE__.
This is a cosmetic preparation for more tweaks coming up.
Change-Id: I2f23c57ebfdb5355919c06ac5ded7732e3b17a97
Extend the vty_bind_cmd VTY command to allow to optionally specify
a port in addition to the IPv4 address.
Introduce telnet_init_default to relieve client code from having
to query the bind IPv4 address (and now the TCP port). Instead a
client only needs to pass the default TCP port to use.
Client code should use it like:
int rc = telnet_init_default(ctx, priv, OSMO_VTY_PORT_SGSN);
Change-Id: Id5fb2faaf4311bd7284ee870526a6f87b7e260f3
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Simplify gsup_test.c by defining an end marker in gsup.h. No need to
manually update the last element every time anymore.
The C standard guarantees, that the end marker will have the last value
plus one: "Each subsequent enumerator with no = defines its enumeration
constant as the value of the constant expression obtained by adding 1 to
the value of the previous enumeration constant." (From C99: 6.7.2.2
Enumeration specifiers)
Change-Id: I2aab7245e209f0ebd2f33a83d4d181dd3339cb17
Similar to existing 16 and 32 bit value helpers but simpler because we
don't have to worry about alingment and endianness.
Change-Id: Ic0a148bd04b8860e321f509fdcd913f688c8e920
The name "LAI AND LAC" makes no sense because a LAC
is part of a LAI. Keep the old name available for
API backwards compatibility.
Change-Id: I2749cf75b7b45de0cd43cf4c696a6b6984f5a065
Related: OS#3124
This is 1:1 the result of doing
cd libosmocore
./contrib/struct_endianess.py
git commit -a
Running struct_endianess.py again should result in no changes.
That means we could include such a check in the gerrit verification job now.
Change-Id: Ia0b99d76932aeb03e93bd0c62d3bf025dec5f9d2
Basically, I am applying code review that I would have given had I not been on
vacation when the last osmo_sock_get_name* stuff was merged.
osmo_sock_get_name2() is so far a static internal function. However, it is
nothing like osmo_sock_get_name(), so instead rename it to
osmo_sock_get_ip_and_port(). Also make it public API, no need to hide it. I'm
adding an "and" in the name to hopefully clarify: "ip_port" vs. "ip_and_port"
-- there already are _get_X_ip_port() functions that only return the port
string, despite "ip" in the name.
Add new public osmo_sock_get_name2(), which is like osmo_sock_get_name(),
except it uses a static string instead of talloc, and omits the braces. This
is most convenient for log statement formats, avoiding dyn allocations.
Add new osmo_sock_get_name_buf(), which is like osmo_sock_get_name2() but
writes to a caller provided char buffer.
Use osmo_sock_get_name_buf() in the implementation of osmo_sock_get_name(),
but use another (non-static) local string buffer, because adding braces is too
complex without talloc_snprintf().
Rationale:
I want to improve the logging of socket errors, e.g. change
DLMGCP ERROR Failed to read: 111/Connection refused (mgcp_client.c:720)
to
DLMGCP ERROR Failed to read: r=10.0.99.2:2427<->l=10.0.99.2:2728: 111='Connection refused' (mgcp_client.c:721)
but it is just not handy to compose logging with the current API:
- osmo_sock_get_name() requires a talloc_free().
- all the others require output buffers.
- the only way to conveniently compose a logging string and,
- notably, the only trivial way to skip the string composition if the logging
level is currently muted, is to have a function that returns a static string:
the new osmo_sock_get_name2().
- (I think the osmo_sock_get_{local,remote}_* convenience wrappers should never
have been added, because they encourage the caller to invoke the same code
twice, for IP addr and port, and throw away one half each time.)
Related: Iae728192f499330d16836d9435648f6b8ed213b6 (osmo-mgw)
Change-Id: I8ad89ac447c9c582742e70d082072bdd40a5a398
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add functions to encode Global Call. Ref. from TS 29.205 as 3GPP TS
48.008 §3.2.2.115 information element
* add corresponding tests
Change-Id: I82ce0207dc8de50689a8806c6471ad7fbae6219d
Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
It's often handy to compare certain msgb layer to a given array and
print the position where they differ. Add simple pretty-printer and
corresponding L* wrappers.
Change-Id: I3bc95f2f5ab6e3f4b502647fb3e0aaaf1f7c4cf5
Add a standalone bcd-to-string conversion function with generic parameters.
Add a regression test in utils_test.c.
So far there is no single universal implementation that converts a BCD to a
string. I could only find gsm48_mi_to_string(), which also interprets
surrounding bytes, MI type and TMSI as non-BCD value.
The idea is to use this function from gsm48_mi_to_string() and similar
implementations in subsequent commits.
Root cause: in osmo-msc, I want to have an alternative MI-to-string function
for composing an FSM name, which needs the BCD part of gsm48_mi_to_string() but
not the TMSI part.
Change-Id: I86b09d37ceef33331c1a56046a5443127d6c6be0
Counting list entires should not alter the list content: let's make this
obvious from type signature.
Change-Id: I414e67a3de733fab407161b3264d3b89070ba537
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
We already have some GSM29118 related definitions and functions in
libosmocore. Lets also add some functions to generate GSM29118 messages
(similar to those we have for GSM0808).
Change-Id: Ic87f8a771b87b52215d0a7451b67794557b80b8a
Related: OS#3615
The specification defines a default port where the SGs interface should
be reachable. Lets add a define-constant for it.
Change-Id: Ia4b9f547dd980411d15b2691b7f535fa0463f0f1
Related: OS#3615
It's similar to osmo_sockaddr_to_str_and_uint() but does not require odd
typecasting for AF_INET case. Make osmo_sockaddr_to_str_and_uint() into
wrapper around new function and make sure to check for address family
before typecasting. Also use proper return type.
Change-Id: Ie384483124d407a960ab6732e6a7fd90554389d2
The value string arrays in the header file (gsm_29_118.h) are not
declared as extern. Lets add it now.
Change-Id: Ib6c4cbea649f790fa4db1ed2fe2b7e76a60291b4
Related: OS#3615
When adding complex TLV structures where length of V is not known in
advance it's handy to be able to simply add Tag and save the pointer to
the Length field so it can be updated once entire Value is added and its
length is known.
Change-Id: I8dc1e4880352833a0a49c1dd0d7cb4148ac43aff
We always use id = 0 when sending TRAP messages. Let's make this more
obvious by introducing appropriate define.
Change-Id: I33d7d4c6a1885a75a85d6f2f017430e0860b4126
* add missing L1 and L4 hexdump
* add msgb_l4() for consistency and convert msgb_sms() into simple alias
Those will be used in follow-up patches for msgb debug/test helpers.
Change-Id: I8d6dd1b1ff3aa98a452711c692ca7dee0449203b
We currently have no generator function that can generate BSSMAP
HANDOVER PERFORMED messages. Lets add function for this.
Change-Id: I825106858bd89afc9837811b8fed2e8accc82441
Related: OS#3645
ARFCNs are values in well defined ranges. Until this patch, ARFCNs not
belonging to any band were blindly assigned to DCS1800 by
gsm_arfcn2band, causing unnoticed bugs and misconfigurations in
osmo-bsc.
Previous API gsm_arfcn2band cannot accomodate this kind of check easily,
so let's deprecate it to tell people to use a new API gsm_arfcn2band_rc
which performs this kind of checks and allows callers to log failures,
misconfigurations, etc.
At the same time, modify implementation of gsm_arfcn2band to abort if an
invalid ARFCN is passed, this way users of this API can notice they are
passing wrong data to it that most probably will produce unexpected
results.
Related: OS#3063
Change-Id: I780d452dcebce385469e32ef2fd844df6033393a
It's convenient to hold all LCLS-related parameters from 3GPP TS 48.008
in a single structure.
This will be used in follow-up patch handling Assignment Request with
extended parameters as well as corresponding BSC code working with LCLS.
Change-Id: I4b873f9a3c5a5d33b438382971b3d92e40d48d62
Related: OS#2487
These are actually parts of the struct in big endian order, which will soon be
done automatically by struct_endianess.py.
Change-Id: I9bc694f10fa9cef0bb7fc791bb40e7602459b16b
That's necessary for 'struct tlv_parsed' definition although lack of it
does not cause build failure in libosmocore for me but does so for
osmo-bsc.
Change-Id: I3b2d3955d02b07dc7ec5e9f0c66cc477196703ed
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
The msgb_wrap_with_TL() is generally useful so it make sense to make it
public to facilitate code re-use.
Other helpers can be implemented as trivial wrappers over existing tlv.h
functions. Update headers and code accordingly.
Change-Id: I37e91d031fba28cf1c6735b8069b0265746f55e6
Add values indicating that LCLS control/config/status value has not been
received yet.
Change-Id: I52dc6a52f5ee043ed2c1625ffecfd495e3c746b1
Related: OS#2487
* add Class definitions
* add helper to check for extended bit
* add helper to get Cause's Class
* use enum in gsm0808_cause_name() and gsm0808_create_cipher_reject() to
avoid confusion between class and cause
* update gsm0808_create_cipher_reject() comments
Change-Id: I31b31dfc22eb4b6b07089e1255246ac458125340
Related: OS#3187
The value strings for the SGSAP IEI are missing, lets add a set of value
strings and a function to retrieve them.
Change-Id: I2787303174f74ffba86675bce2c12f680d8ea708
Related: OS#3615
The header file gsm_29_118.h is defining variables of type struct
value_string, which is declared in core/utils.h. We should add an
include to utils.h to prevent confusion when the header is used.
Change-Id: I9f9bb62d29cd068820ad5aa677717bd448de3f4a
Related: OS#3615
There is already a group of similar functions for L1, L2 and L3,
but L4 was missing. The L4 is usually used for parsing of complex
L3 messages, such as SS/USSD and SMS.
This change introduces a similar halper for L4.
Change-Id: I755f2d654bbdad2a8b4f94df9023bdd370b07ae6
The function that generates the clear command takes a parameter
"reason", which is the cause code. Lets give it the name "cause" to have
a coherent naming scheme that matches the other functions and the 3gpp
specs.
Change-Id: I7b6c15e8fa8db13deef5041095944ca1c58fb99f
Return only the IP or port of either the local or remote connection,
not the whole set of IP and port of both the local and remote
connection like osmo_sock_get_name() does it. This is needed for
OS#2841, where we only want to print the remote IP.
Related: OS#2841
Change-Id: I6803c204771c59a2002bc6a0e6b79c83c35f87e1
It will allow to make code handling chan_nr values more easier to read
and less prone to errors.
union is used to be able to get the full octet in
case we need to pass it somewhere else or encode it.
An extra union is used in struct abis_rsl_common_hdr and others to allow
using fields directly while keeping API compatibility.
Change-Id: Icd6822021207270a00106c50f8ca6b93c1250df9
It will allow to make code handling link_id values more easier to read
and less prone to errors.
union is used to be able to get the full octet in
case we need to pass it somewhere else or encode it.
An extra union is used in struct abis_rsl_common_hdr to allow using fields
directly while keeping API compatibility.
Change-Id: Ibd75a493bcfdf46c028ea466867d0c0d83d46343
Wireshark GSMTAP dissector has LTE NAS subtypes for plain NAS messages
and NAS messages with security header. This commit adds definition for
these subtypes.
Change-Id: I49d15fb13299c1bcbe0fb7e50bf222294c7a49ef
Later release of 3GPP TS 36.331 added new LTE RRC channels. This commit
additionally defines LTE RRC message types existing in Release V15.3.0.
Change-Id: Ifa48b2227be15af04c9a4702d2025abcc660f0df
Add a function to convert S0-S15 bits to struct gsm48_multi_rate_conf,
which hold the codec settings for AMR.
Change-Id: I973736273c236eee84decf15868190e339c3fed4
Related: OS#3548
The enum gsm48_chan_mode has value strings, but no function to retrieve
those strings. Lets add one.
Change-Id: If715705e1ebdfcfdfae1c2099932f7bb8b3861a7
Since the CMD_ATTR_* flags are intended to be used in bitwise
operations, let's assign them proper values. Adding a new flag
(e.g. CMD_ATTR_FOO_BAR) could actually result in assigning 0x03
instead of expected (0x01 << 2).
Change-Id: I3b1badef830f7e6436a67673b5709ec33c060c68
Related: OS#3584
parameter cfg in gsm0808_sc_cfg_from_gsm48_mr_cfg() is used read only.
Lets add a const to make this clear to the compiler.
Change-Id: I31e8d273b070b0afc446a298299d4f502d6c396b
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
This resurrects change-id I4e656731b16621736c7a2f4e64d9ce63b1064e98
which was reverted in I9e0d405e303ed86d23703ca6362e958dddb2f861
due to gsm0808_test failing.
The test failure is fixed by properly clearing the struct
gsm48_multirate_cfg prior to running tests (add memset(0)).
Change-Id: Ia782e21c206c15e840226d79b4209d13658ee916
Related: OS#3548
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
3GPP TS 48.008 chapter 3.2.2.103 states that the configuration bits of
OFR_AMR_WB are coded as follows:
"S0, S2, S4 indicates the supported Codec Configurations. S1, S3, S5, S6,
S7 are reserved and coded with zeroes."
The current default setting of 0x3F violates this requirement. Lets set
the "forbidden" settings zu zero and keep only the allowed ones.
Change-Id: I4a481def59e9c98cfdcafc2b80c0ac7df0c14130
Completely drop the implementations of log_vty_command_{str,description}().
These functions have been public API once, marked as deprecated since
c65c5b4ea0 (March 2017). I considered to keep
them, or reduce them to useless stubs, but it is quite silly, really. These
functions are completely and utterly useless outside of libosmocore. Any
program linking these deserves to fail.
Re-implement vty logging level command gen, in logging_vty.c. logging.c is
simply the wrong place for that.
Introduce logging_internal.h to share logging definitions to logging_vty.c
without publishing as API.
Introduce static gen_logging_level_cmd_strs() to compose a list of category
arguments with their descriptions for VTY commands. Use osmo_talloc_asprintf()
instead of the previous error prone and chaotic strlen() counting method.
Do not dynamically generate log level arguments, just keep static strings. We
are super unlikely to ever change the log levels we have.
No changes in logging_vty_test.vty: proves that there is no functional change.
All of this, besides introducing basic sanity, is cosmetic preparation to be
able to re-use the generic command generation code for arbitrary commands with
category or level args (for deprecated and new keywords).
Rationale: I want to hide 'all' and 'everything' from the VTY command
documentation, by means of deprecating. I first tried to simply define a
deprecated 'logging level CAT everything' command:
logging level (all|rsl|rr|...) (debug|info|notice|error|fatal)
logging level CAT everything # <- deprecated and hidden
But unfortunately, command matching doesn't work as intended when the CAT
argument reflects a valid category; I want it to invoke the deprecated function
as soon as the 'everything' keyword follows, but it stays stuck to the "valid"
command when the category argument matches an explicit keyword in that list,
and will throw an error on the following 'everything' keyword. I.e.:
logging level rsl everything
% Unknown command # <-- leads to config file parse error
logging level unknown_string everything
% Ignoring deprecated 'everything' # <-- works only for invalid categories
So I need to define 'everything' separately, again with a list of each valid
category instead of a generic CAT arg.
Change-Id: I3b083f27e3d751ccec258880ae7676e9af959a63
We already have osmo_str2lower() and osmo_str2upper(), but these lack:
* proper destination buffer bounds checking,
* ability to call directly as printf() argument.
Deprecate osmo_str2upper() and osmo_str2lower() because of missing bounds
checking.
Introduce osmo_str_tolower_buf(), osmo_str_toupper_buf() to provide
bounds-safe conversion, also able to safely convert a buffer in-place.
Introduce osmo_str_tolower(), osmo_str_toupper() that call the above _buf()
equivalents using a static buffer[128] and returning the resulting string
directly, convenient for direct printing. Possibly truncated but always safe.
Add unit tests to utils_test.c.
Replace all libosmocore uses of now deprecated osmo_str2lower().
Naming: the ctype.h API is called tolower() and toupper(), so just prepend
'osmo_str_' and don't separate 'to_lower'.
Change-Id: Ib0ee1206b9f31d7ba25c31f8008119ac55440797
Having all inculdes listed in one place is a common good
practice, which prevents one from adding duplicates.
Change-Id: I3f52189d5e8f9afafc39525e95385a085f8f850a
Allow printing the source file information *after* the log information.
Add target->print_filename_pos, log_set_print_filename_pos() and enum
log_filename_pos, and the optional 'last' keyword to the 'logging print file'
vty command. (An enum in case we want to add other positions later.)
Rationale: on log lines, the logging context is usually printed first in the
logging text. Without the source file information, this logging context pretty
much aligns in an easily readable way. When adding the source file information,
each line's logging context info is shifted right by a pretty much random
amount and it is hard to spot recurring logging contexts.
One solution is to switch off source file info, of course, but that's not an
option when actively hacking on bugs and new features.
For example, it is unnecessarily hard to spot lchan FSM related log lines in
this osmo-bsc log snippet:
DRSL NOTICE mgw_endpoint_fsm.c:603 mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Freeing instance
DRSL NOTICE fsm.c:381 mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Deallocated
DMSC NOTICE mgw_endpoint_fsm.c:603 SUBSCR_CONN(conn0){CLEARING}: Received Event FORGET_MGW_ENDPOINT
DCHAN DEBUG lchan_rtp_fsm.c:741 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED
DCHAN DEBUG lchan_rtp_fsm.c:520 lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Freeing instance
DCHAN DEBUG fsm.c:381 lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Deallocated
DCHAN DEBUG lchan_rtp_fsm.c:520 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED
DCHAN DEBUG lchan_fsm.c:1232 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: state_chg to WAIT_RF_RELEASE_ACK
DRSL NOTICE handover_fsm.c:762 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DRSL NOTICE handover_fsm.c:762 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Freeing instance
DRSL NOTICE fsm.c:381 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Deallocated
DCHAN DEBUG lchan_fsm.c:1196 lchan(0-0-1-TCH_F-0){WAIT_RF_RELEASE_ACK}: state_chg to BORKEN
DCHAN DEBUG lchan_fsm.c:354 lchan(0-0-1-TCH_F-0){BORKEN}: (type=TCH_F) Clearing lchan state
DLMGCP DEBUG mgcp_client.c:741 Tx MGCP msg to MGCP GW: 'DLCX 3 2@mgw MGCP 1.0'
DLMGCP DEBUG mgcp_client.c:743 Sending msg to MGCP GW size: 66
DRLL NOTICE mgcp_client_fsm.c:422 MGCP_CONN(to-BTS){ST_DLCX_RESP}: Received Event EV_DLCX_RESP
Placing the source file info behind the log text makes it much easier to
follow, while the source file info is still available:
DRSL NOTICE mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Freeing instance (mgw_endpoint_fsm.c:603)
DRSL NOTICE mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Deallocated (fsm.c:381)
DMSC NOTICE SUBSCR_CONN(conn0){CLEARING}: Received Event FORGET_MGW_ENDPOINT (mgw_endpoint_fsm.c:603)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED (lchan_rtp_fsm.c:741)
DCHAN DEBUG lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Freeing instance (lchan_rtp_fsm.c:520)
DCHAN DEBUG lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Deallocated (fsm.c:381)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED (lchan_rtp_fsm.c:520)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: state_chg to WAIT_RF_RELEASE_ACK (lchan_fsm.c:1232)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Terminating (cause = OSMO_FSM_TERM_REGULAR) (handover_fsm.c:745)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Freeing instance (handover_fsm.c:745)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Deallocated (fsm.c:381)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RF_RELEASE_ACK}: state_chg to BORKEN (lchan_fsm.c:1196)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){BORKEN}: (type=TCH_F) Clearing lchan state (lchan_fsm.c:354)
DLMGCP DEBUG Tx MGCP msg to MGCP GW: 'DLCX 3 12@mgw MGCP 1.0' (mgcp_client.c:741)
DLMGCP DEBUG Sending msg to MGCP GW size: 67 (mgcp_client.c:743)
DRLL NOTICE MGCP_CONN(to-BTS){ST_DLCX_RESP}: Received Event EV_DLCX_RESP (mgcp_client_fsm.c:422)
Implementation: for 'last', insert source file info only when an '\n' is found
at the end of the log line composition buffer, so that LOGP()...LOGPC()
constructs also print source file info only when a log line actually ends.
Change-Id: I393907b3c9e0cc1145e102328adad0a83ee13a9f
When IPPROTO_UDP is used then SO_REUSEADDR omitted since UDP is
connection less we do not have to wait until lingering connections time
out. There were also negative effects such as that two applicatications
could use the same UDP port, normally one of the two applications would
get an error, but with SO_REUSEADDR this is supressed. However, there
are applications (UDP MULTICAST) where two applications must be able to
use the same port. In the osmocom project those are osmo-bts-virtual,
virtphy and gsmtap in general.
Lets introduce a flag that the API user can supply in order to have
SO_REUSEADDR applied.
- Add new flag OSMO_SOCK_F_UDP_REUSEADDR
Change-Id: I94aaf6d5224ab23bde5ea5c4a83569b6145ab32b
Related: OS#3497
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: Ibc1d3746f1876ac42d6b1faf0e5f83bd2283cdcc
It's a common pattern having a list of msgb and having to maintain its
size (for instance, to limit the maximum size of the list). Having the
counter updated at the same time that the msgb is enqueued or dequeued
helps avoiding introducing new bugs by forgetting to update the size
counter at the right places.
Change-Id: I33b501e89a8f29e4aa121696bcbb13d4b83db40f
Otherwise applications need to use "extern void* tall_sigh_ctx" and set
it manually (that symbol is not exported in any header file) or end up
allocating struct signal_handler into the NULL talloc ctx.
API created in a similar way as already existing msgb_talloc_ctx_init(),
but without the pool_size because it's not considered necessary in this
case.
Change-Id: Id58ca18eb826b8f4183a7cf0dbb2b38cba702a09
To reset the state of BSSGP allow to flush the BSSGP queues.
When testing (with TTCN3) the test object should be resetted between
each test.
Introduce the functions:
bssgp_fc_flush_queue() - flushs a single flow control object
bssgp_flush_all_queues() - flushs queues of all BSSGP connections
Change-Id: I29b6ad6742ddf9b0b58b4af37d9a1cf18e019325
There was gsm0480_l3hdr_push() declared in a header file, but
not exposed in 'libosmogsm.map'. Furthermore, for some reason
it was a part of GSM 04.80 API, what is not actually correct.
Let's rename this symbol, and properly expose it as a part of
the GSM 04.08 API. Also, let's introduce an auxiliary wrapper
for messages, where the transaction identifier is required
(see GSM 04.07, section 11.2.3.1.2).
Change-Id: I8a045efe8335d83fcbe8d43eb180972e3b1d9dda
In the previous commit we deprecated ipa_ccm_idtag_parse() but
also removed ipa_ccm_idtag_parse_off(), for which I couldn't find
any users. However, legacy openbsc.git still uses this function,
so let's re-introiduce it in its original form.
Change-Id: Ibfe53b04340eb355c8bfb8453a2af1522a4b6baf
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As we're moving this to a common/shared library now, we need to use
the osmo_ namespace prefix for symbol names, struct/type names and
constants.
Change-Id: Ie36729996abd30b84d1c30a09f62ebc6a9794950
This imports the code from osmo-msc 6afef893e17bce67e4d4119acd34d480ed03ba77
with minimal changes to make it compile. Symbol renaming to osmo_
prefix is done separately in a follow-up patch to have a as-clean-as-possible
import first.
Change-Id: I9bc38102318da02d1fe46ef516df3cfd6bf8e3da
Contrary to the existing gsm0480_create_ussd_resp(), the new function
only generates the value part of the FACILITY IE, and not the IE
Tag/Length or the 04.08 L3 header. This is needed in the context of
GSUP-encapsulated USSD, as here we don't work with L3 messages, but
only pass on the FACILITY IE value.
Change-Id: Ide240279240322f643e142229eb7829f538c6314
In SIMtrace 1 the ATR was sent the same way as an APDU.
The ATR is not an APDU, and could be mis-interpreted as valid APDU.
This change allows to make the difference between actual APDU and
the ATR, but also adds sub_types for future SIMtrace 2 use cases.
Change-Id: I5bd0dff5a4a90cfe96d9c4f3dec6657e1d85bf7a
Callers require to know whether the returned ERROR cmd was received or
generated locally, in order to send it or do something with it locally.
Related: OS#3394
Change-Id: Ide9170e5c31967c353f8fe4e8227e64130b91eae
enum gsm0808_permitted_speech does not have any value strings. Lets
add value strings to make debugging easier.
Change-Id: I5b5612a5df2758b0137a34c17f7c8c2b3f07c806
The value string table gsm48_chan_mode_names[] lacks a function
to get the value string by a value. Lets add one.
Change-Id: I0757bcc278c140e18249e35864338e19cdaa3cf7
The conv_gen.py utility was tested against both Python 2 and 3,
so there is no need to enforce Python 2. Also, having:
#!/usr/local/bin/python{2|3}
is a bad idea, because Python may be installed in a different location.
Change-Id: I6007d481047b584db13d6eda70fb99f11f9ddaa1
In Change-Id I5a70eb65952cbc329bf96eacb428b07a9da32433 we redirected
all OSMO_ASSERT() via osmo_panic(). However, this caused various
applications to have build failures, as OSMO_ASSERT() now appeared
to be able to return to the call site. Let's inform the compiler
explicitly that there's no return from osmo_panic().
Change-Id: I8adf4c7b0ee6a4581cef8dd4e9f6a1dfde70ee55
A loooong time ago, we introduced osmo_panic() as a wrapper around
abort(). The advantage is, that this wrapper can be overridden, and
that it will also work in embedded (bare iron) targets, where the
abort simply translates to an infinite loop.
Change-Id: I5a70eb65952cbc329bf96eacb428b07a9da32433
Add:
gsm0808_create_handover_detect()
gsm0808_create_handover_complete()
gsm0808_create_handover_failure()
To existing structs gsm0808_old_bss_to_new_bss_info and
gsm0808_handover_required, add a final 'more_items' flag that makes future
extensions API and ABI compatible.
Fix the msgb string for Handover Request Ack.
Extend some API doc comments.
Related: OS#2283 (inter-BSC Handover, BSC side, MT)
Change-Id: I03ee7ce840ecfa0b6a33358e7385528aabd4873f
In Change-Id I1cee271fed0284a134ffed103c0d4bebbcfde2a8 we added support
for a new session state IE, but we didn't add any value_string array
for string conversion of it. Let's fix this.
Change-Id: I3d9f087786dc37c42498fa9a2be07483ec93ba7b
This function can be used to resolve the error message type for
a given message type. Can be used by generic error handlers that
work for any incoming message type.
Change-Id: Ic637bec53dd7fe3ec83da99b49b4eae34d5602b2
This function can be used when there is only a part of GSM 04.80
message available - Facility IE, e.g. when a message is carried
over GSUP/MAP. Let's expose it.
Refactoring includes the following:
- adding the 'gsm0480_' prefix;
- correcting inverted return value;
- cosmetic code style changes.
Change-Id: I623c39ffbe6cdee65eade8435a2faa04d0da193e
In some cases, there is no need to parse the whole message,
e.g. during the conversion from DTAP to GSUP/MAP. This
function can be used to extract given IE from a message.
Change-Id: I3989d061903352473305f80712f1a1560d05df3d
This function permits the user to register deprecated log categories,
which will ensure that if log categories are removed from a program,
old config files will still load.
We simply dynamically allocate a cmd_element and install it at
CFG_LOG_NODE. Not registering it at VIEW_NODE or ENABLE_NODE
ensures that it's not accessible from the interactive VTY, but only
from the config file / configure node.
Change-Id: I171f62ea2dc565b3a6c3eecd27fb7853e2529598
The general idea about each osmo_fsm_instance having a separate
log-level was to be able to selectively increase/show/enable logging
for some FSM instances (e.g. of a particular subscriber) while
maintaining normal logging verbosity for all other instances of the
same FSM.
The introduction of LOGPFSML() in Change-Id
If295fdabb3f31a0fd9490d1e0df57794c75ae547 broke that idea, as it would
use a compile-time log level, irrespective of the
osmo_fsm_inst.log_level setting of the given instance.
Let's combine the two:
Use the explicit level stated at LOGPFSML(), _unless_ this instance
has a higher log_level configured.
This way, all FSMs should normally be created with
osmo_fsm_inst.log_level == LOGL_DEBUG. At that point LOGPFSM()
statements would be rendered at debug level, typically below the
threshold of most logging configurations.
Code that has explicit higher log levels like LOGPFSML(fi, LOGL_ERROR)
would always be printed, as it is an error message.
And if we now increase the osmo_fsm_inst.log_level, then even the normal
LOGPFSM() statements would suddenly be logged at that higher level,
selectively increasing log verbosity - like originally intended.
Change-Id: I1820f04d0c6f5d5ff08eb95b8c0e88764534491a
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
The idea is to be able to add a gsm0808_cell_id to a gsm0808_cell_id_list2:
first convert it to a list, then re-use gsm0808_cell_id_list_add(). It will be
used by osmo-bsc to manage neighbor-BSS cell identifiers from VTY.
Change-Id: Ibf746ac60b1b1e920baf494b396658a5ceabd788
This new function can be used to print a rate counter group according
to a format string. The intention is to generalize and replace manual
printing of counters as implemented for the 'show statistics' VTY
command of osmo-bsc.
Related: OS#3245
Related: osmo-bsc commit 71d524c059c5a5c90e7cb77d8a2134c1c68b9cde (g#9217)
Change-Id: Idb3ec12494ff6a3a05efcc8818e78d1baa6546bd
For some strange reason, the osmo_mncc_name() inline function
was not in the mncc.h header, but in the mncc.c file. Let's fix that.
Change-Id: I2c3666510c981dffa4ba25bed517fd7ebd1250f5
* prefix all symbols/constants with osmo_
* use stdint.h types instead of kernel types
* use Doxygen API documentation
* use Osmocom CRC16-CCITT functions
* use Osmocom bit-reversal functions
* integrate with Automake
Change-Id: I109085ab3e412c20b19cd42fb7137aa0e4167542
I've been importing from 94d7dbf108813ea45a91e27e9a8bd231d5a23fa7
but the isdnhdlc code hasn't seen any changes since 2012 anyway.
Change-Id: I3c58f9cb6921c2fdd0f2fcb11f622a0be88c7c63
Linux offers file descriptor based periodic (interval) timers,
which can achieve a higher precision than our userspace based
timers and which can be slave'd to CLOCK_MONOTINIC or other clock
sources. Let's add some code for osmo_fd wrapped versions that
integrate well with our select() abstraction.
The code has been used in osmo-bts-trx since June 2017 (change-id
I51b19adde14ebb7ef3bb863d45e06243c323e22e), and I'm just renaming
and moving it to libosmocore here. After a merge, the osmo-bts
implementations can be removed in favor if this one.
Change-Id: Ibeffba7c997252c003723bcd5d14122c4ded2fe7
Add:
- gsm0808_current_channel_type_1()
- gsm0808_permitted_speech()
- gsm0808_chosen_channel()
- gsm0808_channel_type_name()
gsm0808_permitted_speech() is moved from osmo-bsc's bssap_speech_from_lchan();
gsm0808_chosen_channel() is moved from osmo-bsc's lchan_to_chosen_channel();
Rationale: will be re-used by inter-BSC handover, makes sense to keep with the
other gsm0808 utils.
Related: OS#2283 (inter-BSC handover, BSC side)
Change-Id: I8a3cc5d4548e9a78d945d54c69ccced251edcec9
According to TS 24.008 10.5.4.7 the called party BSC number IE
has a maximum length of 43 octets.
This length is assumed inside osmo-hlr with a magic number:
uint8_t msisdn_enc[43]; /* TODO use constant; TS 24.008 10.5.4.7 */
This change makes libosmocore provide a constant which osmo-hlr can use.
Change-Id: Ia0bf6ceadcac38a8c75d166402b54058e5c6c6d4
Imagine following scenario:
1- client connects to CTRL iface, a new conn is created with POLL_READ
enabled.
2- A non-related event happens which triggers a TRAP to be sent. As a
result, the wqueue for the conn has now enabled POLL_WRITE, and message
will be sent next time we go through osmo_main_select().
3- At the same time, we receive the GET cmd from the CTRL client, which
means POLL_READ event will be also triggered next time we call
osmo_main_select().
4- osmo_main_select triggers osmo_wqueue_bfd_cb with both READ/WRITE
flags set.
5- The read_cb of wqueue is executed first. The handler closes the CTRL
conn for some reason, freeing the osmo_fd struct and returns.
6- osmo_qeueue_bfd_cb keeps using the already freed osmo_fd and calls
write_cb.
So in step 6 we get a heap-use-after-free catched by AddressSanitizer:
[0;m20180424135406115 [1;32mDLCTRL[0;m <0018> control_if.c:506 accept()ed new CTRL connection from (r=10.42.42.1:53910<->l=10.42.42.7:4249)
[0;m20180424135406116 [1;34mDLCTRL[0;m <0018> control_cmd.c:378 Command: GET bts.0.oml-connection-state
[0;m20180424135406117 [1;34mDLINP[0;m <0013> bts_ipaccess_nanobts.c:417 Identified BTS 1/0/0
[0;m[1;36m20180424135406118 [1;34mDNM[0;m[1;36m <0005> abis_nm.c:1628 Get Attr (bts=0)
[0;m[1;36m20180424135406118 [1;34mDNM[0;m[1;36m <0005> abis_nm.c:1628 Get Attr (bts=0)
[0;m20180424135406118 [1;34mDCTRL[0;m <000e> osmo_bsc_ctrl.c:158 BTS connection (re)established, sending TRAP.
[0;m20180424135406119 [1;32mDLCTRL[0;m <0018> control_if.c:173 close()d CTRL connection (r=10.42.42.1:53910<->l=10.42.42.7:4249)
[0;m=================================================================
==12301==ERROR: AddressSanitizer: heap-use-after-free on address 0x611000003e04 at pc 0x7f23091c3a2f bp 0x7ffc0cb73ff0 sp 0x7ffc0cb73fe8
READ of size 4 at 0x611000003e04 thread T0
#0 0x7f23091c3a2e in osmo_wqueue_bfd_cb /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/libosmocore/src/write_queue.c:65
#1 0x7f23091ad5d8 in osmo_fd_disp_fds /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/libosmocore/src/select.c:216
#2 0x7f23091ad5d8 in osmo_select_main /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/libosmocore/src/select.c:256
#3 0x56538bdb7a26 in main /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/osmo-bsc/src/osmo-bsc/osmo_bsc_main.c:532
#4 0x7f23077532e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#5 0x56538bdb8999 in _start (/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-896/inst/osmo-bsc/bin/osmo-bsc+0x259999)
Fixes: OS#3206
Change-Id: I84d10caaadcfa6bd46ba8756ca89aa0badcfd2e3
Ericsson supports a RSL command to page and immediate assign
as single command. For paging a MS the BTS must know the
paging group.
Change-Id: I9194500e307ad69f8da07510bc965a7a5cd82a2a
We are alredy doing the same way for ip.access and siemens ones, and
this way we avoid using the hardcoded value in osmo-bsc.
Change-Id: I7cb65f3ff1cfdbe4eee97b7545bcd13a38c72e25
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
Rationale: so far we use code like
if (TLVP_PRESENT(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS)) {
val = TLVP_VAL(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS);
len = TLVP_LEN(&tp, VERY_L0NG_ENUM_VALUE_NAME_TH4T_NEVER_EMDS);
}
This is a) very long and b) prone to picking the wrong name one of the three
times, which would use the wrong length or val without necessarily being
noticed. A safer and shorter, more readable pattern is:
struct tlv_p_entry *e = TVLP_GET(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS);
if (!e)
return -ENOENT;
hexdump(e->val, e->len);
Change-Id: I445de17fc2daa3ab051f5708dd0cc185b23dc048
According to the GSM TS 04.07, section 11.2.3.1.1 "Protocol
discriminator", bits 1 to 4 of the first octet of a standard
L3 message contain the protocol discriminator IE.
Meanwhile, the GSM48_PDISC_USSD represents value 0x11, i.e.
0b10001, that requires 5 bits, and moreover it is not
documented anywhere. Let's drop it.
Change-Id: Ic4eb8a6db4ff1dfd535bd0c84e7acf1908422f64
Clarify semantics and micro-optimise for the case of single Cell Identifer IEs.
Test in gsm0808_test.c
So far we have gsm0808_enc_cell_id_list2(), but there also exist instances of
single Cell Identifiers (3GPP TS 48.008 3.2.2.17).
It is possible to decode the same using the cell identifier list API, but this
forces the caller to also keep a full struct gsm0808_cell_id_list2 with all its
127 entries around.
E.g. for handover, there are two Cell Identifiers (Serving and Target); I'd
need two full cell id lists for each, and these would be dynamically allocated
for each handover operation, whether it uses them or not.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I9f9c528965775698ab62ac386af0516192c4b0cc
Allow passing multiple struct tlv_parsed in an array, to allow parsing as many
repeated IEs as are expected by the caller.
From tlv_parse(), call tlv_parse2() with dec_multiple = 1 to yield the previous
behavior. tlv_parse() remains valid API.
An example of multiple IEs is the BSSMAP Handover Request, containing Cell
Identifier (Serving) and Cell Identifier (Target), both defined by 3GPP TS
48.008 3.2.2.17 with identical IE tags; both are mandatory.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: Id04008eaf0a1cafdbdc11b7efc556e3035b1c84d
This will be used by the upcoming neighbor_ident API in osmo-bsc, where the vty
interface allows composing neihbor BSS cell identifier lists, and we want to
allow adding individual items from individual user commands.
It will also be useful to accumulate cell identifiers in case a subscriber sees
multiple alternative cells from a neighboring BSS, and we want to pass these on
to the MSC in a Handover Required.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I5781f5fa5339c92ab2e2620489b002829d206925
This will be used by cell idenitifier list code, like upcoming neighbor_ident
VTY in osmo-bsc and regression tests.
Change-Id: Iebc5cdf61b697b1603900993fc265af3eca0cedf
All our projects have seen patches to move to 3-digit MNC handling.
Furthermore, since our builds no longer break from deprecation warnings, I shall
no longer refrain from deprecating old API.
Change-Id: I55dfaf7ce74870de44120b26c42d45bb7b184341
OSMO_IS_LITTLE_ENDIAN is always defined and has a value of
either 0 or 1
as a result in byteswap.h the corresponding swap functions
will be always called, independent of the endianess
Signed-off-by: Thorsten Alteholz <osmocom@alteholz.de>
Change-Id: I4a09d2d8ccf155e70a3977ae1747758b6bc5125e
There seems to be quite some confusion / overlap between enum
gsm48_reject_value, gsm48_gsm_cause and gsm48_gmm_cause. I tried to go with
gsm48_gsm_cause_names[], but e.g. GSM48_REJECT_CONGESTION is not represented.
Instead of attempting to mix/merge those enums, provide a separate value string
array for enum gsm48_reject_value.
This will be used by osmo-msc's libvlr (refactoring of FSM result handling),
I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1.
Change-Id: I6661f139e68a498fb1bef10c266c2f064b72774a
In the osmo-msc, I would like to set the subscr conn FSM identifier by a string
format, to include the type of Complete Layer 3 that is taking place. I could
each time talloc a string and free it again. This API is more convenient.
From osmo_fsm_inst_update_id(), call osmo_fsm_inst_update_id_f() with "%s" (or
pass NULL).
Put the name updating into separate static update_name() function to clarify.
Adjust the error message for erratic ID: don't say "allocate", it might be from
an update. Adjust test expectation.
Change-Id: I76743a7642f2449fd33350691ac8ebbf4400371d
Rationale: with osmo_escape_str(), you get the escaped contents of the string,
but not so graceful handling of NULL strings. The caller needs to quote it, and
for NULL strings not quote it.
osmo_quote_str() is like osmo_escape_str() but always quotes a non-NULL string,
and for a NULL string returns a literal NULL, i.e. it should (tm) give the
exact C representation of a string.
That's useful in testing, to show exactly what char* situation we have, without
jumping through hoops like
if (str)
printf("\"%s\"", osmo_escape_str(str, -1));
else
printf("NULL");
Copy the unit test for osmo_escape_str() and adjust. To indicate that the
double quotes are returned by osmo_quote_str(), use single quotes in the test
printf()s.
I considered allowing to pick the quoting characters by further arguments, but
that complicates things: we'd need to escape the quoting characters. Just
hardcode double quotes like C.
Change-Id: I6f1b3709b32c23fc52f70ad9ecc9439c62b02a12
The CTRL interface has a ctrl_cmd_def_* API that allows deferring a CTRL
command reply until later. However, the command handling currently fails to
acknowledge this and deallocates the struct ctrl_cmd anyway.
Fix: in struct ctrl_cmd, add a defer pointer to be populated by
ctrl_cmd_def_make(). A cmd thus marked as deferred is not deallocated at the
end of command handling. This fix needs no change in calling code.
(Another idea was to return a different code than CTRL_CMD_HANDLED when the
command is to be deferred, but that would require adjusting each user of
ctrl_cmd_def_make(). The implicit marking is safer and easier.)
Show that handling deferred commands is fixed by adjusting the expectations of
ctrl_test.c's test_deferred_cmd() and removing the now obsolete exit_early
label.
One symptom of the breakage is that osmo-bts-sysmo crashes when asked to report
a trx's clock-info, which is aggravated by the fact that the sysmobts-mgr does
ask osmo-bts-sysmo for a clock-info.
The crash appears since Id583b413f8b8bd16e5cf92a8a9e8663903646381 -- it looked
like just fixing an obvious memory leak, which it did as shown by the unit
test, but deferred ctrl commands actually relied on that leak. Both fixed now.
Related: OS#3120
Change-Id: I24232be7dcf7be79f4def91ddc8b8f8005b56318
As it was already documented before, the 'ss_request' struct has
a rudiment of deprecated 'ussd_request' struct - the 'ussd_text'
field. It represents the data either of an INVOKE component,
either of a RETURN_RESULT component, encoded as ASCII in case
if DCS is 0x0f (i.e. decoded by the code itself), otherwise
raw bytes 'as is'.
Previously, there was no possibility to distinguish between
ASCII and raw bytes with different DCS. Moreover, the payload
decoding is not desired in some cases.
Let's introduce the new fields, which will carry the raw
unmodified payload, its length and DCS (Data Coding Scheme).
Change-Id: Ia193d175021e145bb3b131290231f307dbefc64a
libosmocore has no value strings for BSSMAP cause codes yet.
- Add value strings for BSSMAP cause codes and a function
to retrieve them
Change-Id: I313dd8d7b06374e1e35ddc18b7a42562d9e25d45
Related: OS#1609
Deprecate osmo_init_logging() for the benefit of adding an explicit talloc
context argument to new function osmo_init_logging2(). Pass a ctx to
log_init() instead of hardcoded NULL.
Before now, *all* of our code uses a NULL ctx for logging, which amounts to
talloc "leaks" hit by address sanitizer builds on newer gcc (e.g. gcc 7.3.0 on
debian 9).
This commit helps fixing "leaks" detected in e.g. osmo-bsc unit tests by a
sanitize build with gcc (Debian 7.3.0-12) 7.3.0.
Change-Id: I216837780e9405fdaec8059c63d10699c695b360
The speech codec defaults are not correct. The defaults recommended
in 3GPP TS 28.062, Table 7.11.3.1.3-2 are limited by 3GPP TS 48.008,
Section 3.2.2.103. Some defaults are actually reserved for future
use. Also the endianess of the 16 bit values is reversed.
- correct values so that they match the specification
- transmit bytes in the correct endianess
Change-Id: I6c3a34d39a375d71c4128fd38f06629e8b98b100
This is a more modern way of printing the Abis OML Formatted Object
Header, without assuming that it would be used in a log statement
or prescribing the log level to be used.
Change-Id: I9b2c2afec28882b817d104d5b062651ade7aadd8
Introduce gsm0808_dec_cell_id_list2() with supports additional types of
cell identifier lists. The new parsing routines are based on similar
routines used by the paging code in osmo-bsc's osmo_bsc_bssap.c.
Likewise, introduce gsm0808_enc_cell_id_list2() with support for the
same additional types of cell identifier lists.
The old API using struct gsm0808_cell_id_list is deprecated.
The previous definition was insufficient because it assumed that all
decoded cell ID types could be represented with a single uint16_t.
It was declared in a GSM protocol header (gsm/protocol/gsm_08_08.h)
despite being a host-side representation of data in an IE.
The only user I am aware of is in osmo-msc, where this struct is used
for one local variable. osmo-msc releases >= 1.1.0 make use of this API.
While here, fix a small bug in a test:
test_gsm0808_enc_dec_cell_id_list_bss() set the cell ID type to 'LAC'
but obviously wants to use type 'BSS'.
Change-Id: Ib7e754f538df0c83298a3c958b4e15a32fcb8abb
Related: OS#2847
The functions osmo_bts_set_feature() and osmo_bts_has_feature() are
currently defined as inline. Since inline is a hinting, the compiler
might choose not to inline the function. This eventually leads to
linker problems because the function is then defined multiple times.
- use "static inline" instead of "inline" only.
This patch is a follow up patch to
Change Id 680acae725
Change-Id: Iddd97415a17b06b69f69ddca2e2e296eb2f23a89
I found myself often using osmo_mnc_from_str() to also decode an MCC and be
strict about it, but each time I felt the need to comment like "using
osmo_mnc_from_str() also for MCC". Rather formalize this properly.
Use a static inline function, no need to add more symbols to libosmo-gsm.
Change-Id: I020a4f11791c61742a3d795f782805f7b7e8733e
osmo-bsc and osmo-bts share enums and value strings to describe
feature data that is exchanged via OML (manufacturer id) on startup.
Also the functions to set and get the respecitive bits in the feature
bitvectors are in osmo-bsc and osmo-bts. This is a code duplication
and should be resolved.
- add enum osmo_bts_features (replaces enum gsm_bts_features)
- add osmo_bts_features_descs (replaces gsm_bts_features_descs)
- add osmo_bts_set_feature (replaces gsm_btsmodel_set_feature)
- add osmo_bts_has_feature (replaces gsm_btsmodel_has_feature)
Change-Id: Id0c35aef11aa49aa40abe7deef1f9dbd12210776
In some cases, we want to mark an unset MCC-MNC. Define uint16-max for this
purpose.
osmo-bsc code is already doing so with a -1 and using int data types, which
will become inconvenient with the new API that handles MCC and MNC as uint16_t.
Change-Id: Ieee7add0bd6d94cf84743a49794bbcd38561b72f
osmo_mnc_from_str() preserves leading zeros in the string and is useful for
VTY config parsing (osmo-bsc, osmo-msc, osmo-sgsn, osmo-pcu).
osmo_{plmn,mnc}_cmp() takes care of the slight intricacy of ignoring the 3-digit flag
if the MNC is anyway >99. Will be used by osmo-sgsn.git and osmo-bsc.git. (All
current users just care about identical MNC, but a proper cmp doesn't hurt.)
Change-Id: Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6
Enable representing three-digit MNC with leading zeros. The MNCs 23 and 023 are
actually different; so far we treated both as 23. Re-encode an incoming BCD or
string of 023 as it were, i.e. not dropping the leading zero as 23.
Break ABI compatibility by changing the size and ordering of structs
gprs_ra_id, osmo_plmn_id, osmo_cell_global_id, ... by adding an mnc_3_digits
flag.
Change ordering in gprs_ra_id because the canonical oder is {Mobile Country
Code, Mobile Network Code}, so have the mcc member first.
ABI compatibility cannot be maintained for struct gprs_ra_id, since it is a
direct member of structs bssgp_bvc_ctx and bssgp_paging_info, and even just
adding a flag to the end would cause ABI changes of those structs. Similarly,
osmo_plmn_id is a direct member of osmo_location_area_id, and so forth.
Add new API to set and read this additional flag to preserve leading zeros:
- osmo_plmn_to_bcd(), osmo_plmn_from_bcd() after
gsm48_mcc_mnc_to_bcd() and gsm48_mcc_mnc_from_bcd().
- gsm48_decode_lai2(), gsm48_generate_lai2() after
gsm48_decode_lai(), gsm48_generate_lai().
- gsm0808_create_layer3_2() after gsm0808_create_layer3() and gsm0808_create_layer3_aoip().
- various osmo_*_name() functions in gsm23003.h (osmo_rai_name() still in
gsm48.h close to struct gprs_ra_id definition). The amount and duplication of
these may seem a bit overboard, but IMO they do make sense in this way.
Though most code will soon see patches unifying the data structures used, in
some cases (vty, ctrl) they are required singled out. Without these
functions, the formatting ("%0*u", mnc_3_digits ? 3 : 2, mnc) would be
duplicated all over our diverse repositories.
In various log output, include the leading MNC zeros.
Mark one TODO in card_fs_sim.c, I am not sure how to communicate a leading zero
to/from a SIM card FS. The focus here is on the core network / BSS.
To indicate ABI incompatibility, bump libosmogsm and libosmogb LIBVERSIONs;
adjust debian files accordingly.
Implementation choices:
- The default behavior upon zero-initialization will be the mnc_3_digits flag
set to false, which yields exactly the previous behavior.
- I decided against packing the mnc with the mnc_3_digits field into a
sub-struct because it would immediately break all builds of dependent
projects: it would require immediate merging of numerous patches in other
repositories, and it would make compiling older code against a newer
libosmocore unneccessarily hard.
Change-Id: Id2240f7f518494c9df6c8bda52c0d5092f90f221
So far, we used quarter-bits across the L1SAP between the hardware/PHY
specific part of OsmoBTS and the common part. In order to increase
the resolution, let's add fields/members for 1/256th bit.
In order to keep ABI and API compatibility, we use a union around the
old and new values, so old code will still compile + work withe new
libosmocore.
Change-Id: Ibb58113c2819fe2d6d23ecbcfb8b3fce4055025d
If a monotonic clock must be used, then the clock_gettime API is used
which uses timespec structures. Linux systems by default don't provide
helpers to calculate time using timespecs, so let's add them here.
Let's also make this header public so these helpers can be used in other
projects using libosmocore (expected user: libosmo-netif).
Change-Id: I45fc993b9bb0a343763238bf463c8640f47b00f1
For all other decode operations we report the BER, but not for the
RACH. This results in osmo-bts-trx not being able to report BER
to the higher layers, which is possible on other BTS backends.
Let's close this gap by introducing gsm0503_rach_ext_decode_ber()
and gsm0503_rach_decode_ber() with the usual n_errors / n_bits_total
arguments.
Change-Id: I2b1926a37bde860dcfeb0d613eb55a71271928c5
This breaks all existing / older osmocom-bb builds, and hence
cannot be accpeted. See also https://gerrit.osmocom.org/#/c/6679
Related: OS#2985
This reverts commit 3c38e60cd5.
Change-Id: Icfc52ca4e5cbe3a444d98037d27fa101e3614e06
The function _osmo_fsm_inst_term() terminates all child FSMs befor
it calls fi->fsm_cleanup(). This prevents the cleanup callback to
perform last actions on the child FSMs (e.g.
osmo_fsm_inst_unlink_parent()).
- Since moving the cleanup callack to the beginning of the function
would alter the termination behavior and possibly cause malfunction
in already existing implementation that use OSMO fsm, a new
optional callback that is called immediately at the beginning of
the terminatopn process is added.
Change-Id: I0fdda9fe994753f975a658c0f3fb3615949cc8bb
Closes: OS#2915
Sometimes we want to create an FSM instance before we know its name. In
that case we should be able to update the id later.
Change-Id: Ic216e5b11d4440f8e106a297714f4f06c1152945
Add generic function which allows caller to set Mobile Identity
explicitly. This allows to use IMEI or IMEISV for example. Make
gsm48_generate_mid_from_imsi() into wrapper around new function.
Change-Id: Id79be7abfff75ecd0d248bbeed93e605abeec9b3
Add inline functions to manipulate and query ACC flag bits
in the rach_control.t2 and rach_control.t3 octets.
These function definitions also serve as documentation of
the purpose of rach_control.t2/t3.
Change-Id: I8f0a65c2980f86eb5c43f3bebe727f4d4d973163
Related: OS#2591
This avoids compiler warnings like
/tmp/work/sysmobts_v2-poky-linux-gnueabi/osmo-pcu/0.4+gitAUTOINC+4c112dc5a6-r1.18/recipe-sysroot/usr/include/osmocom/core/msgb.h: In function 'const char* msgb_hexdump_l2(const msgb*)':
error: invalid conversion from 'void*' to 'const unsigned char*' [-fpermissive]
return osmo_hexdump(msgb_l2(msg), msgb_l2len(msg));
which we've been getting in osmo-pcu builds on some platforms.
Change-Id: I0ec652a1a569ec1507d8411cf1ef87afabcca799
* match return type of osmo_gsup_encode() with osmo_gsup_decode() to allow
propagating error to caller
* check return value of osmo_gsup_encode() in GSUP test
* return errors instead of braking app with aseert
Change-Id: Idaa1deecb6d9e15329bd51867b4f6a03357461f0
Related: OS#2864
Add wrapper for osmo_strlcpy() which uses sizeof() to automatically
determine buffer's size and use it for GSMTAP logging. This is pretty
common use case for osmo_strlcpy() so it's a good idea to save some
typing by using generic define.
Related: OS#2864
Change-Id: I03d0d3d32a8d572ad573d03c603e14cdc27a3f7b
TS 24.007 is quite clear: The upper two bits of the message type
octet are *not* part of the message type in any of the L3 protocols
which implement sequence numbers. it doesn't matter if it's R98 or
R99, or whether the sequence number is 1bit or 2bits wide.
Related: OS#2908
Change-Id: Iec875a77f5458322dfbef174f5abfc0e8c09d464
3GPP doesn't specify a network-side T310 default, but waiting for 180s
(3 minutes!) for the next message after CALL CONFIRMED is clearly way
too long and will just use radio resources for no good reason.
Change-Id: Ia52f9358bc86b23c72af9c80e2fff5cb0004b57a
Related: OS#2884
At the moment it is not possible to unlink a child from from
its parent, nor is it possible to assign a new parent to a
child FSM.
- osmo_fsm_inst_unlink_parent():
Make it possible to unlink childs from a parent.
- osmo_fsm_inst_change_parent():
Make it possible to change the parent of a child.
Change-Id: I6d18cbd4ada903cf3720b3ad2a89fc643085beef
As MNCC is rather hard to debug (wireshark cannot trace UNIX domain
sockets), let's add our own decoder that we can use from related
debug log statements in the respective programs.
Change-Id: I216aaf70868ba5f3860a60c4b2442957531a3011
In the C API, add another enum log_file_type value, and when set print only the
basename of the source file path.
Rationale: especially when not building directly in the source dir, the paths
to the source files can become rather long. Usually, just the basename of the
file is sufficient to identify the source line.
Change-Id: If3e4d5fb2066f8bf86e59c82d1752b1a843cf58e
Add a separate flag and API to switch the category-in-hex output:
log_set_print_category_hex().
Add log_set_print_filename2() to modify only the print_filename flag. The old
log_set_print_filename() function still affects both flags. Explain the
rationale in the comment for log_set_print_filename().
There is no need to deprecate log_set_print_filename(); it might cause compiler
warnings and break strict builds unnecessarily.
Add VTY command 'logging print category-hex (0|1)'.
Since there is no VTY command to switch filename output, nothing needs to be
adjusted there (a command will be added in a subsequent patch).
Change-Id: Iba03a2b7915853c6dccaf6c393c31405320538b4
Log the log level string after the category name, if enabled.
The default behavior remains unchanged.
Change-Id: Ie6be365cfa6aeabdf115bff19bac198440c9adf1
According to the GSM 04.80 (version 5.0.0) specification Annex A
"Expanded ASN.1 Module "SS-Protocol", the maximum size of a USSD
OCTET STRING is 160 bytes.
Thus according to ETSI TS 123 038 (version 10.0.0) specification
6.1.2.3 "USSD packing of 7 bit characters", in 160 octets, it's
possible to pack (160 * 8) / 7 = 182.8, that is 182 characters.
The remaining 6 bits are set to zero.
This change defines both mentioned values:
- GSM0480_USSD_OCTET_STRING_LEN 160
- GSM0480_USSD_7BIT_STRING_LEN 182
keeping the old MAX_LEN_USSD_STRING 'as is' due to compatibility
reasons. Now the new value is used for ss_request structure, while
old one is still used for deprecated ussd_request structure.
Change-Id: I6dead74f9ecea079752ff2400cdaf7c30187784e
When a bad GSM voice frame is received, it's being replaced
by a silence frame. This may cause unpleasant audio effects.
This change implements a functionality to craft a replacement
frame from the last known good frame. Currently, only FR is
supported, support for other codecs may be added latter.
Change-Id: I06a21f60db01bfe1c2b838f93866fad1d53fdcd1
It's just a tiny wrapper around gsm48_encode_ra() with less strict type
signature.
Related OS#1640
Change-Id: I79d6d1133afbf32e891a6b0e3a244c6885ea9614
Add gsm48_encode_ra() which takes appropriate struct as [out] parameter
instead of generic buffer. Using uint8_t buffer instead of proper struct
type prooved to be error-prone - see Coverity CID57877, CID57876.
Old gsm48_construct_ra() is made into tiny wrapper around new
function. The test output is adjusted because of the change in function
return value which was constant and hence ignored anyway.
Related: OS#1640
Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
This change defines the GSM FR bit positions as described
in RFC 3551, which will be used by further ECU
(Error Correction Unit) implementation.
Change-Id: I1d0a198af0f8dd1f690b5a81f5c9eb92c43aefed
There are some projects, such as OsmoBTS and OsmocomBB, which
are dealing with raw TCH payloads, so they need to have the
FR/HR/EFR frame length defined. At the moment, each project
defines them itself. Let's share these definitions.
Change-Id: Ib19dd1bf81712d034157f9ce061008be0000ef38
So far it uses 2323, a development default. Instead, assign new ports,
appending to the common range of VTY and CTRL ports: 4261 and 4262.
Related: https://osmocom.org/projects/cellular-infrastructure/wiki/Port_Numbers
Related: I28bd7a97d24455f88fadc6724d45c3264ba2fce4 (osmo-gsm-manuals)
Change-Id: Ife52a968a41cb286f640006587877971ff66c1a4
If a control command fails to parse, we so far discard specific error messages
and instead send just "Command parser error".
In ctrl_cmd_parse() we actually compose detailed error replies, but in the end
simply talloc_free() them and return NULL.
A first step to report these errors to the ctrl command issuer is to not return
NULL and instead return the cmd with type = CTRL_TYPE_ERROR. Add
ctrl_cmd_parse2() to return such instead of NULL.
To stay API compatible, provide ctrl_cmd_parse2() to return a cmd on errors.
ctrl_cmd_parse() retains identical behavior but becomes just a simple wrapper
around ctrl_cmd_parse2() which discards the cmd on error.
No need really to deprecate ctrl_cmd_parse() yet; especially as long as
compiler warnings might break jenkins builds.
Change-Id: I5047c9f977d70b03eea77cbcfd2b96d43ea46880
In order to allow unit testing the ctrl iface msgb handling, have a separate
msgb entry point function from the actual fd read function.
An upcoming patch will prove a memory leak in CTRL msgb handling by a unit test
that needs this separation.
Change-Id: Ie09e39db668b866eeb80399b82e7b04b8f5ad7c3
To report invalid characters in identifiers, it is desirable to escape any
weird characters. Otherwise we might print stray newlines or control characters
in the log output.
ctrl_test.c already uses a print_escaped() function, which will be replaced by
osmo_escape_str() in a subsequent patch.
control_cmd.c will use osmo_escape_str() to log invalid identifiers.
Change-Id: Ic685eb63dead3967d01aaa4f1e9899e5461ca49a
To send a Ciphering Mode Command, we may need to derive a Kc from UMTS AKA
tokens. gsm_milenage() derives Kc from 3G tokens, but also derives an SRES.
For SRES, it requires an OPC, which may need to be derived from OP first. All
we need is a Kc, so we could feed a zero OPC ... but to simplify the function
call for cases where just a Kc is required, separate the c3 function out from
gsm_milenage(), as osmo_auth_c3(). Obviously call osmo_auth_c3() from
gsm_milenage() (meaning that osmo-hlr's 55.205 derived auc tests still cover
exactly that implementation).
Prepares: If04e405426c55a81341747a9b450a69188525d5c (osmo-msc)
Related: OS#2745
Change-Id: I85a1d6ae95ad9e5ce9524ef7fc06414848afc2aa
For validating CTRL input, we want to verify that an input variable is a series
of valid osmo_identifier_valid() separated by dots. Allow validating any
additional chars with identifiers, for CTRL vars will be just ".".
Change-Id: I13dfd02c8c870620f937d789873ad84c6b1c45de
For the lua console printing I need to print several values with
continuation but also specify the filename. Add a "C" for continue
and forward arguments.
Change-Id: I1d6dcb2567b9ed2c8767f661737b979bc3d1377e
For example encode_auth_info() from gsup.c calls
msgb_tlv_put(msg, iei, 0, NULL)
to put a tag and len with content data following later.
However, this would cause a memcpy() from a NULL pointer, in tlv_put(). Allow
passing NULL and len = 0 for cases like the above:
If val is NULL, use memset(0) instead of memcpy().
If len is zero, do not copy nor memset anything.
Hence make tlv_put() behave in a well-defined and valid way for any and all
input args; no negative fallout is possible from this patch.
Add proper API doc comment.
Fixes a sanitizer build failure in gsup_test:
../../../../src/libosmocore/include/osmocom/gsm/tlv.h:99:2: runtime error: null pointer passed as argument 2, which is declared to never be null
Helps fix sanitizer build on debian 9.
Change-Id: I13dce9cd1228817890d3e81edeeb660c893c1d64
It was decided that osmo-mgw as direct successor of osmo-bsc_mgcp
will use the same VTY port number (similar to osmo-nitb, osmo-bsc
and osmo-bsc-sccplite all using the same VTY port number)
Change-Id: Iec1da9f3b4d170416279f05876d9e1ae2970c577
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
Following I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b a deprecation of
vty_install_default() and install_default() commands is indicated.
However, compiler warnings may clutter build output or even fail strict builds,
hence I am submitting the deprecation in a separate patch.
Depends: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
Change-Id: Icf5d83f641e838cebcccc635a043e94ba352abff
As rate counters are automatically exposed on the CTRL interface,
we need to make sure they don't contain special characters such as '.'
which are not permitted/supported by CTRL.
In order to be able to run old versions of osmocom programs with
libosmocore versions after this commit, we introduce some special
name mangling: Any '.' in the names are replaced with ':' during
counter group registration, if valid identifiers can be obtained
this way.
Change-Id: Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56
We define the notion of an 'osmocom identifier' which is basically a
7-bit US-ASCII without any special characters beyond "-_:@". We
introduce a function to verify if an identifier consists only of the
permitted characters.
Change-Id: I96a8d345c5a69238a12d040f39b70c485a5c421c
* add comment about underlying assumption that structs in ip/frgre union
members in gprs_nsvc struct have the same memory layout
* remove such assumption from gprs_ns_ll_str()
* use gprs_ns_ll_str() for NSE dump
Change-Id: Idcb912b7b3f7460fd2b058e16650c0bde8f757ee
* introduce defines with NS state names
* use them for vty and tests
* expand test output to print complete NS state
Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9
Related: SYS#3610
Add macro to append to a CTRL commands' reply string, ctrl_cmd_reply_printf().
The talloc_asprintf() part of it is generic enough to qualify for a separate
macro, osmo_talloc_asprintf().
The idea is to not have to decide for each bit added to a string whether the
string is already allocated or not, but simply be able to issue printf commands
and let the macro worry about initial allocation or reallocation.
This originally came from osmo-hlr change
I1bd62ae0d4eefde7e1517db15a2155640a1bab58, where it was requested to move this
bit to libosmocore.
Change-Id: Ic9dba0e4a1eb5a7dc3cee2f181b9024ed4fc7005
When listening for nsip connections is enabled, then every remote
host may send packets. This is useful for an SGSN that serves
multiple PCUs, but contraproductive for a PCU that awaits packets
from a single SGSN.
Add struct members remote_ip, and remote_port to struct gprs_ns_inst,
when set, then the listening end uses connect() to ensure that only
the expected host may send packets.
Related: OS#2401
Change-Id: Ifeb201d9006eec275a46708007ff342cdfc14e45
Old bitvec_set_uint() uses "unsigned int" as input parameter which
length is not guaranteed. It does not allow to specify which bit_value
to set and does not check for incorrect length. Overall this makes it
harder to re-use and more error-prone.
Let's replace it with extended implementation which uses fixed type
length parameters and extra checks. The additional parameter allows
caller to explicitly indicate the need to use L/H instead of 0/1 for bit
vector elements. It's necessary to properly encode some of the messages
from 3GPP TS 44.018, for example §10.5.2.16 IA Rest Octets.
The old function is left for backward compatibility as a tiny wrapper
around new function and will be deprecated in follow-up patches.
Change-Id: I1b670dacb55fb3063271d045f9faa10fccba10a6
Related: OS#1526
Add ctrl_interface_setup_dynip2() to add a node_count parameter, which can be
used to define more ctrl nodes without having to merge a patch to libosmocore.
In consequence, also add ctrl_handle_alloc2(), since
ctrl_interface_setup_dynip() uses ctrl_handle_alloc() to allocate the node
slots, and add node_count param to static ctrl_init().
Passing zero as node_count indicates to use the default of _LAST_CTRL_NODE as
before, i.e. to not define more ctrl nodes. Assert that we never allocate less
than _LAST_CTRL_NODE slots.
The current ctrl_interface_setup_dynip() and ctrl_handle_alloc() become simple
wrappers that pass zero as node_count. Their use is still valid and they do not
need to be deprecated.
The API comment to ctrl_interface_setup_dynip2() explains how to define more
node IDs.
This patch was verified to work by osmo-hlr.git change
I98ee6a06b3aa6a67adb868e0b63b0e04eb42eb50 which adds two node IDs for use by
osmo-hlr only.
Change-Id: I1bd62ae0d4eefde7e1517db15a2155640a1bab58
Similar APIs exist for opstate and availability status.
This patch does not break backward compatibility because osmo-bsc still
requires direct use of the structure in get_string_value().
Change-Id: Ieace734aaff3f07606113feddde65b75202d96d6
In some cases it is required to know the ip-address of the interface
through that a given remote IP-Address can be reached.
Add function osmo_sock_local_ip() to determine the local ip-address
for a given remote ip-address
Change-Id: I2988cc52b196fc8476703d1287e24cb4a48491c2
In ASCII string based protocols it a printf() version that prints
directly to the message buffer may be useful.
Add function msgb_printf(), make sure that msg buffer bounderies
are not exceeded. If the end of the tail buffer is hit, return
with an error code.
Change-Id: I15e1af68616309555d0ed9ac5da027c9833d42e3
This adds a more complete set of API documentation for all
osmo_counter relatedd functions and definitions.
Change-Id: I24283c05620ee86a8beb165af98a85d754549efb
The stat_item code base had some incomplete doxygen documentation
so far. Let's complete it, and at the same time fix some cosmetic
as well as copy+paste issues in the existing documentation bits.
Change-Id: Ib514c137b40bf7b9791bd74be99af0b65575f2b6
With stat_item, stats.c and stats_statsd.c, it is becoming a bit
difficult to understand file naming. Also, the 'statistics.c' file
actually only contained osmo_counter handling, so let's rename it to
counter.c altogether.
Change-Id: I2cfb2310543902b7da46cb15a76e2da317eaed7d
Add osmo_sub_auth_type_names[] and osmo_sub_auth_type_name().
Also add a hint to enum osmo_auth_algo's API doc that osmo_auth_alg_name()
already exists (it is defined further below).
Change-Id: I652a929bcd11c694d86812fb03d0a1cbd985efda
The function is a wrapper on top of getrandom() (if available via glibc) or
corresponding syscall. If neither is available than failure is always
returned.
It's intended to generate small random data good enough for session
identifiers and keys. To generate long-term cryptographic keys it's
better to use special crypto libraries (like GnuTLS for example)
instead.
As an example it's used to replace old insecure random number generator
in osmo-auc-gen utility.
Change-Id: I0241b814ea4c4ce1458f7ad76e31d390383c2048
Related: OS#1694
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
In many callers of the VTY API, we are lacking the vty_install_default() step
at certain node levels. This creates nodes that lack the 'exit' command, and
hence the only way to exit such a node is to restart the telnet session.
Historically, the VTY looked for missing commands on the immediate parent node,
and hence possibly found the parent's 'exit' command when the local node was
missing it. That is why we so far did not notice the missing default commands.
Furthermore, some callers call install_default() instead of
vty_install_default(). Only vty_install_default() also includes the 'exit' and
'end' commands. There is no reason why there are two sets of default commands.
To end this confusion, to catch all missing 'exit' commands and to prevent this
from re-appearing in the future, simply *always* install all default commands
implicitly when calling install_node().
In cmd_init(), there are some top-level nodes that apparently do not want the
default commands installed. Keep those the way they are, by changing the
invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE).
Make both install_default() and vty_install_default() no-ops so that users of
the API may still call them without harm. Do not yet deprecate yet, which
follows in Icf5d83f641e838cebcccc635a043e94ba352abff.
Drop all invocations to these two functions found in libosmocore.
Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
This change introduces a new command, which could be used to
inspect the application's talloc context directly from VTY.
To enable this feature, an application need to provide it's
context via the 'vty_app_info' struct, and register the VTY
command by calling the osmo_talloc_vty_add_cmds().
The new command is a sub-command of 'show':
show talloc-context <context> <depth> [filter]
Currently the following contexts may be inspected:
- application - a context provided by an application;
- null - all contexts, if NULL-context tracking is enabled.
A report depth is defined by the next parameter, and could be:
- full - full tree report, as the talloc_report_full() does;
- brief - brief tree report, as the talloc_report() does;
- DEPTH - user defined maximal report depth.
Also, there are two optional report filters:
- regexp - print only contexts, matching a regular expression;
- tree - print a specific context, pointed by specified address.
The command output is formatted the same way as in case of calling
the talloc_report() or talloc_report_full().
Change-Id: I43fc42880b22294d83c565ae600ac65e4f38b30d
The 'show online-help' produces XML output with <node id="..."> ids. We
reference those from the osmo-gsm-manuals.
Instead of numeric IDs coming from internal code, rather use a human-readable
node ID -- referencing id='config-msc' is much easier than referencing id='23'.
Add a char name[] to struct cmd_node, to hold this name. This may be provided
upon struct definition.
Since callers of the VTY API so far don't have a name yet, we would need to add
names everywhere to get meaningful node IDs. There is a way to get node ID
names without touching dependent code:
My first idea was to find out which command entered the node, i.e. command
'msc' enters the MSC_NODE. But it is impossible to derive which command entered
which node from data structs, it's hidden in the vty command definition.
But in fact all (TM) known API callers indeed provide a prompt string that
contains a logical and human readable string name. Thus, if the name is unset
in the struct, parse the prompt string and strip all "weird" characters to
obtain a node name from that. We can still set names later on, but for now will
have meaningful node IDs (e.g. 'config-msc' from '%s(config-msc)# ') without
touching any dependent code.
When VTY nodes get identical node names, which is quite possible, the XML
export de-dups these by appending _2, _3,... suffixes. The first occurence is
called e.g. 'name', the second 'name_2', then 'name_3', and so forth.
If a node has no name (even after parsing the prompt), it will be named merely
by the suffix. The first empty node will become id='_1', then '_2', '_3', and
so forth. This happens for nodes like VIEW_NODE or AUTH_NODE.
If this is merged, we need to adjust the references in osmo-gsm-manuals.git.
This can happen in our own time though, because we manually create the vty
reference xml and copy it to the osmo-gsm-manuals.git and then update the
references from the vty_additions.xml. This anyway has to happen because
currently the references tend to be hopelessly out of sync anyway, placing
comments at wildly unrelated VTY commands.
Change-Id: I8fa555570268b231c5e01727c661da92fad265de
Note: This will break users' config files if they do not use consistent
indenting. (see below for a definition of "consistent".)
When reading VTY commands from a file, use indenting as means to implicitly
exit child nodes. Do not look for commands in the parent node implicitly.
The VTY so far implies 'exit' commands if a VTY line cannot be parsed on the
current node, but succeeds on the parent node. That is the mechanism by which
our VTY config files do not need 'exit' at the end of each child node.
We've hit problems with this in the following scenarios, which will show
improved user experience after this patch:
*) When both a parent and its child node have commands with identical names:
cs7 instace 0
point-code 1.2.3
sccp-address osmo-msc
point-code 0.0.1
If I put the parent's command below the child, it is still interpreted in the
context of the child node:
cs7 instace 0
sccp-address osmo-msc
point-code 0.0.1
point-code 1.2.3
Though the indenting lets me assume I am setting the cs7 instance's global PC
to 1.2.3, I'm actually overwriting osmo-msc's PC with 1.2.3 and discarding the
0.0.1.
*) When a software change moves a VTY command from a child to a parent. Say
'timezone' moved from 'bts' to 'network' level:
network
timezone 1 2
Say a user still has an old config file with 'timezone' on the child level:
network
bts 0
timezone 1 2
trx 0
The user would expect an error message that 'timezone' is invalid on the 'bts'
level. Instead, the VTY finds the parent node's 'timezone', steps out of 'bts'
to the 'network' level, and instead says that the 'trx' command does not exist.
Format:
Consistent means that two adjacent indenting lines have the exact
same indenting characters for the common length:
Weird mix if you ask me, but correct and consistent:
ROOT
<space>PARENT
<space><tab><space>CHILD
<space><tab><space><tab><tab>GRANDCHILD
<space><tab><space><tab><tab>GRANDCHILD2
<space>SIBLING
Inconsistent:
ROOT
<space>PARENT
<tab><space>CHILD
<space><space><tab>GRANDCHILD
<space><tab><tab>GRANDCHILD2
<tab>SIBLING
Also, when going back to a parent level, the exact same indenting must be used
as before in that node:
Incorrect:
ROOT
<tab>PARENT
<tab><tab><tab>CHILD
<tab><tab>SIBLING
As not really intended side effect, it is also permitted to indent the entire
file starting from the root level. We could guard against it but there's no
harm:
Correct and consistent:
<tab>ROOT
<tab><tab>PARENT
<tab><tab><tab><tab>CHILD
<tab><tab>SIBLING
Implementation:
Track parent nodes state: whenever a command enters a child node, push a parent
node onto an llist to remember the exact indentation characters used for that
level.
As soon as the first line on a child node is parsed, remember this new
indentation (which must have a longer strlen() than its parent level) to apply
to all remaining child siblings and grandchildren.
If the amount of spaces that indent a following VTY command are less than this
expected indentation, call vty_go_parent() until it matches up.
At any level, if the common length of indentation characters mismatch, abort
parsing in error.
Transitions to child node are spread across VTY implementations and are hard to
change. But transitions to the parent node are all handled by vty_go_parent().
By popping a parent from the list of parents in vty_go_parent(), we can also
detect that a command has changed the node without changing the parent, hence
it must have stepped into a child node, and we can push a parent frame.
The behavior on the interactive telnet VTY remains unchanged.
Change-Id: I24cbb3f6de111f2d31110c3c484c066f1153aac9
Add OSMO_BIT_PRINT_EX() which is like OSMO_BIT_PRINT() but allows to
specify character to be printed for set bits. It's useful to print bytes
used as mask where set bit has particular semantics - for example TS
mask in OsmoPCU.
Change-Id: I72528bc1e376134c5a7b6e7a50c48e38c3f48b0a
Related: OS#2282
When doing UMTS AKA with AUTS, it can be interesting to know the SQN.MS that
was encoded in the AUTS. The only way to know this is to provide it as a
separate out-parameter from milenage_gen_vec_auts(), because the SQN.MS from
AUTS stored in umts.sqn is immediately modified non-trivially by
milenage_gen_vec(). Add sqn_ms to struct osmo_sub_auth_data to retain SQN.MS
even after a vector was generated.
Use this to print out SQN.MS for 'osmo-auc-gen -3 -A'.
Adjust test suite expectations.
Related: OS#2464
Change-Id: I9fc05bbf169d06716f40b995154fd42a3f91bef3
This basically follows the concept of osmo_timer_setup() and allows
the caller to fill-in all configurable fields of osmo_fd in one
line of code, rather than open-coding it in 5 lines everywhere.
Change-Id: I6dbf19ea22fd65302bfc5424c10418d1b7939094
In the Protocol Configuration Options IE (see 3GPP TS 24.008 10.5.6.3)
there is yet another new TLV format (derived from PPP IPCP/LCP/...)
which uses 16bit tag and 8bit length. Let's add functions so we can
generate related TLVs. Parsing is unfortunately not possible in our
existing structure as our tlv_parsed array only has 256 entries and
thus cannot cope with 16bit tags.
Change-Id: I9799130e2eba8fae8c4480fbb8a900c30232b694
PDCH is the physical channel, while actually we want to talk about
PDTCH the logical channel. Introduce backwards compatibility define.
Change-Id: Id6782d2247846e2db29fc58d98684970a66db948
In the course of splitting up the openbsc.git repository, we will create
libosmo-mgcp and need a library logging category for that purpose.
Change-Id: I09c587e2d59472cbde852d467d457254746d9e67
Using this option at socket creation, the caller can request disabling
the IP_MULTICAST_ALL socket option.
Change-Id: I5ab5de45c0b64ceb3636ea98245a23defa24ffd4
This introduces a new flag OSMO_SOCK_F_NO_MCAST_LOOP, which can be used
to disable the looping back of multicast packets transmitted throug this
socket to other local sockets on the machine.
As this looping-back is active by default, a single option to deviate
from the default is deemed sufficient.
Change-Id: I24a5b1ebc3f84d2d5d4734e54df50efaea26490b
This is a convenience helper that will both close a fd, mark it as
closed and unregister it from the event loop abstraction. In most
cases, you probably actually want to use it instead of manually closing
and calling osmo_fd_unregister().
Change-Id: Icd0933eed6a24edde7cdcb378e138897ecc5332c
Convert a given frame number into a printable string that displays
the sub components of the frame number.
Change-Id: I8015d2ded3940b01b35df7b72fc35c70c25e9926
These PRBS sequences are specified in ITU-T O.150. They are typically
used as test data to be transmitted for BER (bit error rate) testing.
Change-Id: I227b6a6e86a251460ecb816afa9a7439d5fb94d1
The PDP charging characteristics will be returned from the PDP
selection code and be used in the SGSN. It is following the same
approach as the QoS and PDP addr. It is a bit of a pity that we
have to define this in a different project.
Change-Id: I7815c5dfd7b7fb0ea78d816ebfb3abfbf0090afe
Add deprecation notice for public API use: it shouldn't be used outside
of libosmocore anyway.
Change-Id: I792e30dc44f027fd94e1f65af19fe08bac52b95c
Related: OS#71
These fields can be in the ISD and the PDP Context inofmration. Store
pointers to this IE in both cases. It needs to be used by the SGSN
when opening a PDP context.
Change-Id: Iedc7c02adcf77ca5c9545119e19c968dfbbb3e6b
Recent commit 3149b0d076 adds function
gsm0808_chan_type_to_speech_codec() but adds a completely mismatching name in
libosmogsm.map, as well as a definition with a typo in the name.
Fix the entry in libosmogsm.map.
Add the missing 'c' in gsm0808_utils.h
Change-Id: I5a621fa5ef6b632eabbe224f3dd383eacaffb695
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
Move a longish comment to the timer group so that it appears in the API doc.
Un-doxygen some floating comments that were associated with unrelated code
items ('/**' --> '/*').
Add braces to some function names so that the API doc will render as reference
links.
Change-Id: I3ea5b88cbe9cb54702429158bf47e768e04e8fe7
Especially for short descriptions, it is annoying to have to type \brief for
every single API doc.
Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes
the first sentence of an API doc as the brief description.
Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
Typically we don't place comments with the function declarations
in .h files. Not sure why this file has comments for each. The
API doc belongs in the .c file as proper doxygen comments,
and shouldn't be duplicated in the .h file.
In this particular case, doxygen comments are added in the
corresponding c file recently.
Change-Id: I5c4cb55be5ec59a6945b1720b875c5987f1cfaad
The contents of the speech codec element (struct gsm0808_speech_codec),
that is also used in the speech codec list element (struct
gsm0808_speech_codec_list) can be generated directly from the
permitted speech parameter in the channel type field (struct
gsm0808_channel_type) when full AoIP with compressed speech via
RTP/UDP/IP is assumed and when the codec configuration on the air
interface exactly matches the codec configuration on the IP backhaul.
This patch adds a function that can be used as a helper to fill
out spech codec fields by only giving a permitted speech parameter
as input.
Change-Id: I257c972e9fdf0dfe940a8d483447085bd62e50a2
The permitted speech field used in channel type element (struct
gsm0808_channel_type) uses a different representation as
the type field in the speech codec element (struct
gsm0808_speech_codec)
This patch adds a function to convert from permitted speech to
speech codec type.
Change-Id: Ib26a9c20864459b2baaa04f49b6e7902ba44b7cb
In an AoIP scenario, the speech codec list field specifies the
codecs used in the RTP interface. This patch adds a table
with default codec configurations that match the codec
configurations that are also used on the air interface.
Change-Id: I9dc0165d76a022b2c1b7418bc3133407e61b7261
The implementation of the parser/generator for the speech codec
information element slightly wrong, making it impossible to use
it properly.
(See also: 3GPP TS 48.008, 3.2.2.103)
Change-Id: Idabb0f9620659557672e1c6b90c75481192e5c89
The codec type to be set in member type in struct gsm0808_speech_codec
has its own coding scheme to reference the used codec types. This patch
declares an enum with valid speech codec types.
Change-Id: Icaa768071d4364e671bc7e6d48b82d1f07f93f93
The constants in enum gsm0808_permitted_speech are not very expressive.
Add comments indicating each constant's corresponding codec.
Change-Id: I9734f7c261becffe38ffd41c304d006d08530c1a
3GPP TS 24.008 specifies two new speech versions for half rate and
two new speech modes for full rate. This patch adds the relevant
constants to enum gsm48_bcap_speech_ver in gsm_04_08.h
Change-Id: Id2835384c855f924332d38f01c73bd1cfdb62549
Add the information which GSM Speech codec version coresponds to
which bearer capability speech version.
Change-Id: Ic9493fea139420a52c32b17d00ac7d0b2bf86967
The planned sccp-addressbook implementation in libosmo-sccp
requires two additional VTY nodes.
See also in libosmo-sccp.git:
Change-Id I068ed7f7d113dab88424a9d47bab7fc703bb7942
Change-Id: I42aa29c0cccc97f284b85801c5329b015b189640
It's universally useful so it make sense to have it in the shared core:
* move macro from libosmocoding to libosmocore
* add OSMO_ prefix
* add doxygen docs
Change-Id: I5386ba3e1f1cc153ba96c29dc71c9075a052aa02
A warning was printed even if the deprecation didn't apply to
libosmocore because it is still allowed to use it internally.
This patch fixes this case while still printing a warning if external
projects build using libosmocore headers.
Change-Id: I32212f20756f828af1017482a71e29e4b3adbad4
It's a pity that even with this patch we still are fare away from having
the whole API documented. However, at least we have a more solid
foundation. Updates not only extend the documentation, but also make
sure it is rendered properly in the doxygen HTML.
Change-Id: I1344bd1a6869fb00de7c1899a8db93bba9bafce3
The interleaving/deinterleaving functions were missing 'const'
qualifiers on their input data buffers
Change-Id: I2118c34a6353167787b23f877f1d81d60151aaf9
This adds the minimum amount of API documentation that we should have on
all our code, particularly new code merged into a library.
Change-Id: I526804f64313867913574e50e5b9e9205ad3aa74
It is generally our coding style to mark pointers to constant input data
as 'const *'. For some reason the gsm0503 coding and mapping was not
adhering to this, so let's bring it into compliance.
Change-Id: Id8731d7ae6171dff94741b6ddbb95ab5f03bfd4e
We cannot assume a certain UART API like uart_baudrate() which only
exists in OsmocomBB. Rather, use generic function prototypes
(sercomm_drv_*) which are to be provided by the application /
environment to the sercomm core.
Change-Id: I01ea3067baf1791000c1a7d537ccce496a1ab1ee
osmo_sercomm_{bind,get}_uart() are not really needed anymore, as
sercomm_inst is public and thus the user can access the uart_id member
directly.
Change-Id: I6d57709c3764036046202f16a26c9eb87426c8d1
Those values are not relevant to the sercomm user, only to the
implementation and thus can remain inside sercomm.c
Change-Id: I5700a45985b7c119c6338932171aae62ee4e2d22
Rather than having one global instance, let's permit multiple instances
of sercomm to co-exist, with all API functions extended by the instance
as first argument.
Change-Id: I0f3b53f464b119d65747bcb0be0af2d631e1cc05
This imports the file src/target/firmware/comm/sercomm.c from
osmocom-bb.git without introducing any modifications. It will not even
be built yet, as Makefile integration is intentionally left until it has
been adapted to work inside libosmocore.
Change-Id: I9ee199381c7b5986a9540d124836cdddd0f66c86
The distribution of the channel measurement calculations over
multiple timeslots (continous calculation) requires to keep
track of the frame number in struct info_meas_ind_param
Change-Id: I8c783b4a92ae2c3cc5d17936a146eb49d47eac37
We need to have an architecture-independend way of endian conversion /
byte swapping functions which will also work on embedded (bare iron)
builds. Let's introduce osmocom/core/bytesawp.h for this purpose.
Change-Id: Ibc0cc1e36d4ed63a35cf8ceff3af0f26e5ac7a3d
* add osmo_earfcn_bit_size_ext() function which allows to specify how many
EARFCNs we should skip when estimating required bit size for SI2quater
* make old osmo_earfcn_bit_size() into wrapper over newly added function
and mark it as deprecated
This is necessary to properly estimate necessary space for EARFCNs when
they are spread over several SI2q messages with different index.
Change-Id: I92e12e91605bdab9916a3f665705287572434f74
Related: RT#8792
Table 10.5.157 in 10.5.6.6 of 3GPP TS 04.08 is badly formatted. The first
value 0x19 "LLC or SNDCP failure" is in the same line as the heading and has
not been included in the struct_value so far.
Table 10.5.157 in 10.5.6.6 of 3GPP TS 24.008 fixes this formatting issue and
also defines two more values 0x08 and 0x18 which are now added to the struct
value_string.
Change-Id: I5bcc52f739ff0677011d024448afcc2a54869638
Add a new function timer function to set up the timer, similar to what
we have in the Linux kernel. This patch also converts existing opencoded
timer setup in the libosmocore tree as initial client of this new
function.
This patch implicitly removes function callback passed by reference that
defeat compile time type validation.
Compile-tested only, but I ran make check that reports success when
testing timer infrastructure.
Change-Id: I2fa49972ecaab3748b25168b26d92034e9145666
* remove unused parameter from logging_vty_add_cmds()
* mark log level descriptors static
* change internal static function int check_log_to_target() to more
appropriate bool should_log_to_target()
* deprecate log_vty_command_*() from public API as it should only be
used by logging_vty_add_cmds()
Change-Id: I0e9ddd7ba3ce211302d99a3494eb408907a2916e
Related: OS#71
Add value strings for Service Control PDUs according to 3GPP TS 48.016 §9
and use them for logging.
Change-Id: I0ea3a45f35d68619d4cfa9735ef77abd9f9f0d58
Related: SYS#3610
* data structure representing 3GPP TS 52.021 §9.4.62 SW Description
* function to serialize it into msgb
* function to deserialize it from buffer
* functions to extract/estimate buffer size for SW Description
* test harness (partially taken from OpenBSC)
There are several similar functions to deal with SW Description in
OpenBSC, there's also need to use similar functionality in
OsmoBTS. Hence it's better to put the code into common library with
proper tests and documentation.
Change-Id: Ib63b6b5e83b8914864fc7edd789f8958cdc993cd
Related: OS#1614
This allows programmatic access to introspection of FSM instances, which
is quite handy from e.g. external test cases: Send a message to the
code, then use the CTRL interface to check if that message has triggered
the right kind of state transition.
Change-Id: I0f80340ee9c61c88962fdd6764a6098a844d0d1e
Sometimes (particularly when testing), we may want to parse+execute an
arbitrary control command simply form a string buffer, rather than from
a msgb. Let's add a helper for that.
Change-Id: Iaca748e0d942bb2a1ee7c2776b37485e1439eb0c
When executing test cases, we don't want to bind to a local TCP port, as
we cannot make assumptions as to which ports are actually free.
Change-Id: I5717f9dd92d1f143f069cecd4b4c8ba3d03b25f8
The existing code assumes that the main application knows about all
control command nodes and can thus present one lookup function.
As libraries are getting their own control interface handling, this
is too restrictive, and we need a way how library code can dynamically
register more node lookup helpers. We can now do this by means of a
ctrl_lookup_register() function.
Change-Id: Ib69908d1c57f5bb721d5496e3b4a5258fca450e3
Introduce two lookup helper functions to resolve a fsm_instance based on
the FSM and name or ID. Also, add related test cases.
Change-Id: I707f3ed2795c28a924e64adc612d378c21baa815
Vadim Yanitskiy
Harald Welte
Philipp Maier
Sylvain Munaut
Oliver Smith
Pau Espin
Martin Hauke
Shinjo Park
Neels Hofmeyr
Keith Whyte
Kevin Redon
Daniel Willmann
