GSUP routing was introduced when adding the E interface. Hence that was the
first realm where routing errors could occur. I did notice back then that this
message type was special: it does not convey a response to a particular message
kind -- it does not make sense, for example, to return an Updating Location
Error cause, and do that for all conceivable message types. Instead, this tells
the sender that a deeper error exists, i.e. that the desired peer is completely
gone and unreachable.
I did not foresee though that for D-GSM, there would also be arbitrary GSUP
proxy routing, and that this error is not limited to E interface semantics.
From today's point of view, adding the "_E_" in the name was a mistake.
Remove that "_E_" to yield OSMO_GSUP_MSGT_ROUTING_ERROR (with unchanged message
type discriminator), but provide a #define linking the old name
OSMO_GSUP_MSGT_E_ROUTING_ERROR to the new one.
The only visible change should be that osmo_gsup_message_type_names[] now
returns the new name without "_E_". I am not aware of any regression test
fallout from that.
Change-Id: Ic8e8bd11522d6c51ac7aaf946516cbce26bc6e1e
Provide a common implementation for foo_name_c() functions that base on
foo_name_buf() functions.
char *foo_name_c(void *ctx, example_t arg)
{
OSMO_NAME_C_IMPL(ctx, 64, "ERROR", foo_name_buf, arg)
}
Rationale: the most efficient way of composing strings that have optional parts
or require loops for composition is by writing to a ready char[], and this in
turn is easiest done by using OSMO_STRBUF_* API. Using such a basic name string
implementation which typically returns a length, I often want a more convenient
version that returns a char*, which can just be inlined in a "%s" string format
-- crucially: skipping string composition when inlined in a LOGP(). This common
implementation allows saving code dup, only the function signature is needed.
Why not include the function signature in the macro? The two sets of varargs
(1: signature args, 2: function call args) are hard to do. Also, having an
explicit signature is good for readability and code grepping / ctags.
Upcoming uses: in libosmocore in the mslookup (D-GSM) implementation
(osmo_mslookup_result_name_c()), and in osmo_msc's codec negotiation
implementation (sdp_audio_codecs_name_c(), sdp_msg_name_c(), ...).
I54b6c0810f181259da307078977d9ef3d90458c9 (libosmocore)
If3ce23cd5bab15e2ab4c52ef3e4c75979dffe931 (osmo-msc)
Change-Id: Ida5ba8d9640ea641aafef0236800f6d489d3d322
It's hard to figure out what color logging categories have with those ANSI
color code strings. Instead, define these OSMO_LOGCOLOR_* constants.
Naming: commonly, the logging.h header has the "LOG" prefix in the name, but it
seems saner to include the OSMO_ prefix: it seems too likely that some
libosmocore user somewhere already has defined "LOGCOLOR_RED" somewhere.
Change-Id: I03b6b1f73ae7ee61d37ff921e071a3d0881d3e9a
Currently planned user: for Distributed GSM in osmo-hlr: setting per-MSC
service addresses in VTY: replace/remove existing entries.
osmo_sockaddr_str_cmp() is useful to catch identical resulting IP addresses,
regardless of differing strings (e.g. '0::' and '::' are equal but differ in
strings).
Change-Id: I0dbc1cf707098dcda75f8e07c1b936951f9f9501
The format prints IP:port separated by a colon, which of course is confusing
when the IPv6 address itself contains mostly colons. The new format adds square
braces.
cafe:face::1:42 -> [cafe:face::1]:42
The IPv4 format remains unchanged:
1.2.3.4:42
Change-Id: I161f8427729ae31be0eac719b7a4a9290715e37f
So far we had a function to allocate a new bssgp_bvc_ctx, but not
the opposite one. Let's finally introduce it, so it will be used
at least in OsmoPCU.
Please note that the new symbol has 'bssgp_' prefix, not 'btsctx_'.
Change-Id: Ia78979379dbdccd6e4628c16f00d0c06d9212172
In a multi-threaded environemnt, it's likely that each thread will have
its own, distinct set of file descriptors that it wants to watch.
Hence, let's make the osmo_fd_* functions configure not one global
list of file descriptors, but a thread-local list of file descriptors.
Change-Id: I5082ed3e500ad1a7516e1785bc57e008da2fac9a
New fields are put inside a union to keep backward compatibility with
potential older users of the struct.
Change-Id: I235635800c0de47b1e2b9ec9c7191418f6003554
Some compilers don't like declaration of enums in header files like we
do sometimes for structs:
enum gsm_band;
void foobar(enum gsm_band band);
triggers:
error: use of enum 'gsm_band' without previous declaration
Fixes: b99f4ca2d8
Related: OS#4244
Change-Id: I6c2102c763f565bbe3c8dd7e5b4e04c4a45fff67
Often, an IP address of 0.0.0.0 is considered an unset value (for clients
requiring a server address; not for listening on "any").
osmo_sockaddr_str_is_set() does return false when the port is 0, but there is
no simple way to tell whether the IP address is actually set to a server
address.
Add osmo_sockaddr_str_is_nonzero() to return false if:
- the port is zero, or
- the IP address is zero (0.0.0.0 or ::0), or
- the IP address cannot be parsed.
A practical use example: osmo-msc so far accepts an RTP IP address of 0.0.0.0
as valid. I noticed when trying to trigger error handling from a ttcn3 test.
osmo-msc can use this function to reject invalid addresses from MGCP messages.
Related: I53ddb19a70fda3deb906464e1b89c12d9b4c7cbd (osmo-msc)
Change-Id: I73cbcab90cffcdc9a5f8d5281c57c1f87b2c3550
This is a simpler and more general solution to the problem so far solved by
osmo_fsm_term_safely(true). This extends use-after-free fixes to arbitrary
functions, not only FSM instances during termination.
The aim is to defer talloc_free() until back in the main loop.
Rationale: I discovered an osmo-msc use-after-free crash from an invalid
message, caused by this pattern:
void event_action()
{
osmo_fsm_inst_dispatch(foo, FOO_EVENT, NULL);
osmo_fsm_inst_dispatch(bar, BAR_EVENT, NULL);
}
Usually, FOO_EVENT takes successful action, and afterwards we also notify bar.
However, in this particular case, FOO_EVENT caused failure, and the immediate
error handling directly terminated and deallocated bar. In such a case,
dispatching BAR_EVENT causes a use-after-free; this constituted a DoS vector
just from sending messages that cause *any* failure during the first event
dispatch.
Instead, when this is enabled, we do not deallocate 'foo' until event_action()
has returned back to the main loop.
Test: duplicate fsm_dealloc_test.c using this, and print the number of items
deallocated in each test loop, to ensure the feature works. We also verify that
the deallocation safety works simply by fsm_dealloc_test.c not crashing.
We should probably follow up by refusing event dispatch and state transitions
for FSM instances that are terminating or already terminated:
see I0adc13a1a998e953b6c850efa2761350dd07e03a.
Change-Id: Ief4dba9ea587c9b4aea69993e965fbb20fb80e78
The calculation of the beginning of a block for TCH/F, TCH/H and FACCH
can be challenging since those channels are affected by the diagonal
interleaving of the TCH channels. However, GSM 05.02 Section 7 Table 1
of 5 specifies how the blocks are distributed over the TDMA frame
interval. Lets add a mapping function that is based on that table
Related: OS#3803
Change-Id: I3d71c66f8c401f5afbad9b1c86c24580dab9e0ce
This API will be used by libosmo-netif's osmo_stream for SCTP sockets,
which in turn will be used by libosmo-sccp to support multi-homed
connections.
Related: OS#3608
Change-Id: Ic8681d9e093216c99c6bca4be81c31ef83688ed1
log_enable_multithread() enables use of locks inside the
implementation. Lock use is disabled by default, this way only
multi-thread processes need to enable it and suffer related
complexity/performance penalties.
Locks are required around osmo_log_target_list and items inside it,
since targets can be used, modified and deleted by different threads
concurrently (for instance, user writing "logging disable" in VTY while
another thread is willing to write into that target).
Multithread apps and libraries aiming at being used in multithread apps
should update their code to use the locks introduced here when
containing code iterating over osmo_log_target_list explictly or
implicitly by obtaining a log_target (eg. osmo_log_vty2tgt()).
Related: OS#4088
Change-Id: Id7711893b34263baacac6caf4d489467053131bb
This is useful for timers expected to have a range of valid or expected
values.
Validation is done at runtime when timer values are set by the app or by
the user through the VTY.
Related: OS#4190
Change-Id: I4661ac41c29a009a1d5fc57d87aaee6041c7d1b2
OSMO_GSUP_SUPPORTED_RAT_TYPES_IE corresponds to the Supported RAT Types
Indicator from 3GPP TS 29.002. See 8.1.2 MAP_UPDATE_LOCATION service,
which indicates the capabilities of the MSC/VLR to the HLR.
So far, have room for eight RAT types in the gsup_msg. That is an arbitrary
random choice without any rationale.
OSMO_GSUP_CURRENT_RAT_TYPE_IE is useful to communicate the currently
used RAN / RAT type of the current subscriber during Location Updating Request.
Change-Id: I93850710ab55a605bf61b95063a69682a2899bb1
Nothinh really forbids this case, it's totally fine allocating all space
of msgb as headroom. osmo-pcu actually does that in
gprs_rlcmac_ul_tbf::snd_ul_ud().
Related: OS#4029
Change-Id: Ibe05d08e3169a2603e891f76682a3b352a93ec7a
This list is really not needed by applications and currently only used
internally in logging.c and logging_vty.c.
Change-Id: I5dca069512bfcd0826194427c5482fad8bfd0232
The ECU implementation for FR is currently tested by calling the related
functions directly and by using the generic ECU abstraction layer. However,
the test "test_fr_concealment" only tests directly. Lets add a version
that uses the generic ECU abstraction layer as well.
The generic ECU abstraction layer obsolets the public API functions
osmo_ecu_fr_reset() and osmo_ecu_fr_conceal(), lets tag those functions
as dprecated.
Change-Id: Ib0c8a9b164f14ea4fa00688f760a76cdb4890af4
Global symbol osmo_log_info is declared in logging.c as non-const,
because it is modified. As soon as logging_internal.h is included into
logging.c, the compiler warns about osmo_log_info being declared twice
differently.
Change-Id: Iea961c3caeb12ddf60c99d4dca644bb9ab538767
I missed code review, so here are my comments in form of a follow-up patch
for Id56a1226d724a374f04231df85fe5b49ffd2c43c.
- Fix 'as_unit' arg name to 'val_unit' as in the C file and API doc.
- Explain rounding-up behavior of value conversion in API doc.
- Use osmo_tdef_get_entry() instead of a loop.
Related: OS#4190
Change-Id: Ia91c2f17e40fb9e79ffa5a7f28ce9c3605664402
This API is already useful for users willing to set a given timer to a
given value. It will also contain code later that checks for value being
inside valid range for that timer.
Related: OS#4190
Change-Id: Id56a1226d724a374f04231df85fe5b49ffd2c43c
As 3GPP doesn't specify how the BSC shall communicate ETWS Primary
Notifications over Abis/RSL, we have to use a vendor-specific RSL
message for this. And in order to know if the peer supports this
feature, we introduces BTS_FEAT_ETWS_PN.
Change-Id: I89c24a81ada6627694a9632e87485a61cbd3e680
Related: OS#4046, OS#4047
We don't want to expose the details of a given ECU implementation to
the user (e.g. osmo-bts), but have a generic abstraction layer where
an ECU implementation can simply register a few call-back functions
with the generic core.
As the developer and copyright holder of the related code, I hereby
state that any ECU implementation using 'struct osmo_ecu_ops' and
registering with the 'osmo_ecu_register()' function shall not be
considered as a derivative work under any applicable copyright law;
the copyleft terms of GPLv2 shall hence not apply to any such ECU
implementation.
The intent of the above exception is to allow anyone to combine
third party Error Concealment Unit implementations with libosmocore,
including but not limited to such published by ETSI.
Change-Id: I4d33c9c7c2d4c7462ff38a49c178b65accae1915
The CBSP code assumed that gsm0808_decode_cell_id_u() would return
the number of bytes it has consumed/parsed. But it actually always
returns '0', whcih makes us run in an endless loop :(
Change-Id: I5758af4ec11a827d4b888a3a16c4ec22de90a7d6
The pointless '(R)->ip?' condition of the previous commit made me want to
protect against R == NULL instead.
Change-Id: Ie2f47ad8ae585aaf67a6476c67f8e014820a72bc
Since (R)->ip is a char[], it is always non-NULL. The (x ? : "") condition is
completely pointless. Remove it.
Change-Id: I13ed06776a784cfa99bbdfca2bb4dfe12913a1ec
Rather than having applications maintain their own talloc cotexts,
let's offer some root talloc contexts in libosmocore. Let's also
make them per thread right from the beginning. This will help
some multi-threaded applications to use talloc in a thread-safe
way.
Change-Id: Iae39cd57274bf6753ecaf186f229e582b42662e3
The intention of osmo_tdef_get()'s val_if_not_present argument was to return a
default timeout, or to optionally abort the program for missing timer
definitions if the default timeout is < 0. This was the case in the original
implementation of this API in osmo-bsc, but in the migration to libosmocore,
the argument was by accident changed to an unsigned type. In consequence, the
assertion in the implementation that was intended to abort the program seemed
bogus to coverity, and was fixed by removal in
I7a544d2d43b83135def296674f777e48fe5fd80a -- the wrong direction, as is obvious
from the API doc for osmo_tdef_get().
Note that osmo-bsc master passes -1 in various places and expects the
program-abort behavior that was missing from the libosmocore implementation.
Change the val_if_not_present argument to a signed type, and revert removal of
the assertion, so that passing -1 has the effect described in the API doc:
program abort on missing timer definition.
This bug was not detected because it is hard to write tests that expect a
program abort to happen, hence no tests for this API feature exist.
Related: OS#4152
Change-Id: Ie61c3c85069916336e6dbd91a2c16f7634816417
Rather than having the encoder/decoder library print some log
messages in case of encoding/decoding errors, let's provide something
akin to 'errno', but with a string instead of a numeric error code.
The 'osmo_cbsp_errstr' global variable (if set) contains a
human-readable string describing the most recent encoding/decoding error.
It exists separately for each thread and hence can be used safely in
multi-threaded environments.
Change-Id: Id9a5a595a76ba278647aee9470ded213d8464103
This introduces definitions as well as a parser+encoder for the
Cell Broadcast Service Protocol (CBSP) as specified in 3GPP TS 48.049.
CBSP is used on the interface between CBC and BSC.
Related: OS#3537
Change-Id: I5b7ae08f67e415967b60ac4b824db9e22ca00935
The link quality, defined by C/I (Carrier-to-Interference) ratio,
can be computed from the training sequence of each burst, where we
can compare the "ideal" training sequence with the actual training
sequence and then express that in cB (centiBels, dB * 10).
By analogy with both RSSI and ToA, it can be used to filter out
false-positive detections and ghost Access Bursts.
Change-Id: Ie2a66ebd040b61d6daf49e04bf8a84d3d64764ee
This reverts commit 4e284b6379.
Unfortunately, some projects such as OsmoMSC, OsmoBTS and OpenBSC
do contain OSMO_ASSERT statements without a semi colon. Thus,
this change causes compilation errors when building them.
Please note that only the OSMO_ASSERT's definition is reverted,
while changes to other files (adding missing semicolons) are kept.
Change-Id: I6da4d7397d993f6c1af658cb5ae1e49c92a1b350
When using `OSMO_ASSERT(exp);` clang will warn about
an empty expression because the semi colon was superflous.
Use do {} while (0) to enfore the need of a semi colon.
This might break other test.
Change-Id: I2272d29a81496164bebd1696a694383a28a86434
the DEBUG macro name and ARRAY_SIZE macro function are frequently
used in other projects. If these projects also use libosmocore,
the macros will be redefined. This also generates a warning message
during compilation.
Not redefining the macros removes the warning message and possible
(but unlikely) mis-redefinition.
Change-Id: I0ba91eae8eacc5542d1647601b372e417ed1713c
So far, the public API of osmo_fsm only allowed integral seconds as
timeout. Let's change that to milli-seconds in order to cover more
use cases.
This introduces
* osmo_fsm_inst_state_chg_ms()
* osmo_fsm_inst_state_chg_keep_or_start_timer_ms()
Which both work exactly like their previous counterparts without the _ms
suffix - the only difference being that the timeout parameter is
specified in milli-seconds, not in seconds.
The value range for an unsigned long in milli-seconds even on a 32bit
platform extends to about 48 days.
This patch also removes the documentation notice about limiting the
maximum value to 0x7fffffff due to time_t signed-ness. We don't use
time_t but unsigned long.
Change-Id: I35b330e460e80bb67376c77e997e464439ac5397
TS 04.06 specifies a N200 re-transmission counter that depends on the
channel type, which we didn't care about at all so far. Let's have the
caller tell us the channel type so we can internally look up the correct
N200 value for it.
At the same time, permit the user to specify T200 re-transmission timer
values for each SAPI on both DCCH and ACCH, which is required at least
in the BTS as per GSM TS 12.21. Also, extend the timer resolution of
the API from seconds to milli-seconds, which is more applicable as
particularly on the FACCH the recommended values are in the 200ms range.
Change-Id: I90fdc4dd4720d4e02213197c894eb0a55a39158c
Related: OS#3906
Related: OS#2294
Related: OS#4037
This function parses a single Cell ID list element into a
'union gsm0808_cell_id_u'. This function is going to be used
by the upcoming CBSP support.
Related: OS#3537
Change-Id: I08b33881667aa32f01e53ccb70d44d5b79c7c986
The library should either provide functions that implement encoding
of those rest octets, or it shouldn't. Providing a function that
doesn't do anything but pad the buffer is useless.
Change-Id: Ie10684de6a6b2663e2a871fcdb2b275b6ad7a1e7
There's very little sense behind introducing a function into
libosmogsm which doesn't implement 90% of the spec. Let's allow
the caller to provide the various optional bits of information to
the encoder, rather than generating mostly static SI6 rest octets.
Change-Id: Id75005a0c4a02ce7f809692d58b3bd226bc582b2
libosmo{core,gsm,vty} code is GPLv2+. The tdef code originated in
osmo-msc.git and was moved here without changing the license. That
was a mistake, it always was meant to be under GPLv2-or-later after
moving to libosmocore.git.
Copyright is with sysmocom, so I as the managing director can
approve the license change.
Change-Id: Ie483ff6f6ea0a56c477649677b4b163c49df11d7
libosmo{core,gsm,vty} code is GPLv2+. The OAP code originated in
osmo-msc.git and was moved here without changing the license. That
was a mistake, it always was meant to be under GPLv2-or-later after
moving to libosmocore.git.
Copyright is with sysmocom, so I as the managing director can
approve the license change.
Change-Id: I08311fa8214c15f8df8945b9894226608cf96f15
We don't really *need* it in libosmocore as such, but the lack of
having all osmocom extensions listed here lead to using overlapping
definitions: 0x18 was used for dynamic PDCH on the Abis side, but also
for CBCH on the L1SAP side. Let's list them all here to increase
visibility in case anyone wants to extend this further...
Related: OS#4027
Change-Id: I93e557358cf1c1b622f77f906959df7ca6d5cb12
So far, the TLV code contained two types of functions
* tlp_parse() to parse all TLVs according to definition into tlvp_parsed
* various helper functions to encode individual TLVs during message
generation
This patch implements the inverse of tlv_parse(): tlv_encode(), which
takes a full 'struct tlv_pared' and encodes all IEs found in it. The
order of IEs is in numerically ascending order of the tag.
As many protocols have different IE/TLV ordering requirements, let's add
a tlv_encode_ordered() function where the caller can specify the TLV
ordering during the one-shot encode.
Change-Id: I761a30bf20355a9f80a4a8e0c60b0b0f78515efe
An enum is more clear than an int and #defines for passing around,
also in case you have a switch () statement, the compiler will issue
warnings for unhandled cases.
Change-Id: Icbbe8786a776081d7643193f154e6270224399e6
Add the constant, so it can be used in create-subscriber-on-demand
related patches. ITU-T Rec. E.164 6.1 states that maximum international
number length should be 15. I did not find a source for a minimum
length, but I've added the constant and set it to 1 for consistency
(based on the existing osmo_msisdn_str_valid() function).
Related: OS#2542
Change-Id: Idc74f4d94ad44b9fc1b6d43178f5f33d551ebfb1
IE GSM0808_IE_OSMO_OSMUX_SUPPORT (T, 1 byte) is sent in AoIP appended to
BSSMAP RESET in order to announce the peer that its MGW supports handling
Osmux streams upon call set up.
IE GSM0808_IE_OSMO_OSMUX_CID (TV, T 1 byte & V 1 byte) is sent in AoIP
during call set up:
* MSC->BSC Assignment Request
* BSC->MSC Assignemnt Complete
The 1 byte value contains the local Osmux CID, aka the recvCID aka CID where the
peer sending the Assign Req/Compl will look for Osmux frames on that
call. Hence, the peer receiving this CID value must use it to send Osmux
frames for that call.
As a result, a given call leg BSC<->MSC can have one different Osmux CID
per direction. For example:
* MS => MGW_BSC ==CID 0==> MGW_MSC
* MS <= MGW_BSC <=CID 1=== MGW_MSC
This allows for setups with 256 call legs per BSC on scenarios where NAT
is not a problem, where MSC can have a pool of 256 CID per MGW_BSC (or
remote peer).
Related: OS#2551
Change-Id: I28f83e2e32b9533c99e65ccc1562900ac2aec74e
This function is doing the bulk work of encoding a given Cell
ID List item. gsm0808_enc_cell_id_list2() is modified to be a
wrapper / loop around the new function.
The purpose of this is to expose Cell ID List Entry encoding
so that the upcoming CBSP protocol encoder can re-use this code.
Related: OS#3537
Change-Id: I6cc567798e20365e6587e6b2988e834306d8c80c
In testing against a particular EPC, the SGsAP-SERVICE-REQUEST
can contain a MO fallback value TLV with T 0xF1
Change-Id: Ia2460af9673818d375e28c67f1631b5f7eacdaeb
In Change-Id Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576, the old
declaration of gsm0808_create_handover_request_ack() was accidentially
removed from the gsm0808.h header file. The actual function itself
(and the exported symbol) remained for backwards compatibility at
runtime, but removing the declaration from the header file resulted in
build failures across the board of all automatic tests.
Let's re-introduce the old declaration.
Change-Id: I9e96fa675fccca9ee9631caad7559dea3794d490
osmo-bsc so far omits the AoIP Transport Layer Address from its Handover
Request Acknowledge message, which breaks inter-BSC Handover for AoIP.
Allow fixing that.
One quirk I really don't like about this: I would prefer to directly use struct
sockaddr_storage as a member of the struct gsm0808_handover_request_ack. Even
though struct sockaddr_storage appears in various function signatures, the
gsm0808.c actually also gets built on embedded systems that lack arpa/inet.h
(for me indicated by the ARM build job on jenkins). Compiling gsm0808.c works
only because the actual coding of struct sockaddr_storage is implemented in
gsm0808_util.c, which (apparently) does not get built on embedded and hence,
even though there are undefined references to e.g.
gsm0808_enc_aoip_trasp_addr() it works.
Related: I4a5acdb2d4a0b947cc0c62067a67be88a3d467ff (osmo-bsc)
Change-Id: Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576
For async callbacks it is useful to determine whether a given VTY pointer is still valid.
For example, in osmo-msc, a silent call can be triggered by VTY, which causes a
Paging. The paging_cb then writes to the VTY console that the silent call has
succeeded. Unless the telnet vty session has already ended, in which case
osmo-msc crashes; e.g. from an osmo_interact_vty.py command invocation. With
this function, osmo-msc can ask whether the vty pointer passed to the paging
callback is still active, and skip vty_out() if not.
Change-Id: I42cf2af47283dd42c101faae0fac293c3a68d599
In BSSMAP messages, at least the Cell Identifier IE can appear more than once.
We have tlv_parse2() which allows decoding into an array of tlv_parsed to
cleanly handle multiple occurences. Hence add osmo_bssap_tlv_parse2() which
supports multiple occurences.
An alternative would be to directly call tlv_parse2() with gsm0808_att_tlvdef()
when multiple T occurences are needed, and I'm not really sure why
osmo_bssap_tlv_parse() exists in the first place. But because it does, add a
similar definition that is capable of handling multiple IEs with identical Tag
discriminator.
Change-Id: Ib9a2095f7498dc2cda2a57154b2dbe4621df72f8
gsm48_decode_bcd_number() is unable to provide proper bounds validation of
input and output data, hence osmo-msc's vlr.c introduced a static
decode_bcd_number_safe() a long time ago. Move to libosmocore.
I need to use the same function to decode an MSISDN during inter-MSC Handover,
instead of making it public in osmo-msc, rather deprecate the unsafe function
and provide a safer version for all callers. Mark the old one deprecated.
Change-Id: Idb6ae6e2f3bea11ad420dae14d021ac36d99e921
The actual value-string array 'gsm_chan_t_names' describes
the enum values of 'gsm_chan_t', not 'gsm48_chan_mode'.
Change-Id: Ifc2121b23fb8d07589cc5b7aa8fbf4e27eb6b72b
Fixes: CID#188831, CID#188825
Change two instances of Speech Version values to enum gsm0808_permitted_speech.
It is often not trivial to find the right values for a uint8_t member, giving
the enum name makes it a lot easier/safer to use.
In gsm0808_create_handover_required(), use msgb_tv_put() so that the enum's
storage size doesn't matter. (Already used for handover_performed)
Fix typo in doc of gsm0808_create_handover_required().
Change-Id: I6387836bab76e1fa42daa0f42ab94fc14b70b112
Based on a draft created by Neels, which is the result of reading a MAP
trace of two MSCs negotiating inter-MSC handovers, and of reading the
TS 29.002, TS 29.010 and related specs:
https://lists.osmocom.org/pipermail/openbsc/2019-January/012653.html
I figured out that the "Handover Number" mentioned in the specifications
is the same as the MSISDN IE that we already have, so we can use that
instead of creating a new IE (example usage in tests/gsup/gsup_test.c).
Create a new OSMO_GSUP_MSGT_E_ROUTING_ERROR message type, which the GSUP
server uses to tell a client that its message could not be forwarded to
the destination (see [1]). MAP has no related message.
[1]: Change-Id: Ia4f345abc877baaf0a8f73b8988e6514d9589bf5 (osmo-hlr.git)
Related: OS#3774
Change-Id: Ic00b0601eacff6d72927cea51767801142ee75db
osmo-msc and osmo-hlr have distinct subsystems handling incoming GSUP messages.
So far we decide entirely by message type which code path should handle a GSUP
message. Thus no GSUP message type may be re-used across subsystems.
If we add a GSUP message to indicate a routing error, it would have to be a
distinct message type for subscriber management, another one for SMS, another
one for USSD...
To allow introducing common message types, introduce a GSUP Message Class IE.
In the presence of this IE, GSUP handlers can trivially direct a received
message to the right code path. If it is missing, handlers can fall back to the
previous switch(message_type) method.
Change-Id: Ic397a9f2c4a7224e47cab944c72e75ca5592efef
Various places in our code base figure out how many chars they need to safely
store an IMSI. An IMSI can have a checksum digit, which is not reflected by
GSM23003_IMSI_MAX_DIGITS. And we usually need a terminating \0.
Instead of having a magic +2 repeated every so often, rather define
OSMO_IMSI_BUF_SIZE to contain both checksum digit and nul char, and have the
explanatory comment with it here in libosmocore.
Change-Id: Id11ada4c96b79f7f0ad58185ab7dbf24622fb770
We often compose FSM instance IDs from context information, for example placing
an MSISDN string or IP:port information in the FSM instance id, using
osmo_fsm_inst_update_id_f(). This fails if any characters are contained that
don't pass osmo_identifier_valid(). Hence it is the task of the caller to make
sure only characters allowed in an FSM id are applied.
Provide API to trivially allow this by replacing illegal chars:
- osmo_identifier_sanitize_buf(), with access to the same set of illegal
characters defined in utils.c,
- osmo_fsm_inst_update_id_f_sanitize() implicitly replaces non-identifier
chars.
This makes it easy to add strings like '192.168.0.1:2342' or '+4987654321' to
an FSM instance id, without adding string mangling to each place that sets an
id; e.g. replacing with '-' to yield '192-168-0-1:2342' or '-4987654321'.
Change-Id: Ia40a6f3b2243c95fe428a080b938e11d8ab771a7
To be able to append an escaped or quoted string using
OSMO_STRBUF_APPEND_NOLEN(), the function signature must have the buf and len as
first args, like most other *_buf() functions.
Add osmo_escape_str_buf2() and osmo_quote_str_buf2() to match this signature.
A recent patch [1] has changed the return value of osmo_escape_str_buf() to
char*, removing the const. However, the functions may return const strings,
hence re-add the const. The new signatures always return the non-const buffer.
To avoid code duplication, implement osmo_quote_str_buf() and
osmo_escape_str_buf() by calling the new functions.
I decided to allow slight changes to the behavior for current osmo_escape_str()
and osmo_escape_str_buf(), because impact on callers is minimal:
(1) The new implementation uses OSMO_STRBUF_*, and in consequence
osmo_quote_str() no longer prints an ending double quote after truncated
strings; Before, a truncated output was, sic:
"this string is trunca"
and now this becomes, sic:
"this string is truncat
I decided to not keep the old behavior because it is questionable to begin
with. It looks like the string actually ended at the truncation boundary
instead of the reason being not enough space in the output buffer.
(2) The new osmo_escape_str_buf2() function obviously cannot pass-thru an
unchanged char* if no escaping was needed. Sacrifice this tiny optimization
feature to avoid code duplication:
- it is an unnoticeable optimization,
- the caller anyway always passes a string buffer,
- the feature caused handling strings and buffers differently depending on
their content (i.e. code that usually writes out strings in full length
"suddenly" truncates because a non-printable character is contained, etc.)
I considered adding a skip_if_unescaped flag to the osmo_quote_str_buf2()
function signature, but in the end decided that the API clutter is not worth
having for all the above reasons.
Adjust tests to accomodate above changes.
[1] 4a62eda225
Ibf85f79e93244f53b2684ff6f1095c5b41203e05
Change-Id: Id748b906b0083b1f1887f2be7a53cae705a8a9ae
In OSMO_STRBUF_APPEND, use local variable names that are less likely to shadow
other local variables: prefix with _sb_.
In OSMO_STRBUF_APPEND, add a check to add to .pos only if it is not NULL.
Add OSMO_STRBUF_APPEND_NOLEN(), which works for function signatures that don't
return a length. This is useful for any osmo_*_buf() string writing functions,
so that these write directly to the strbuf.
Change-Id: I108cadf72deb3a3bcab9a07e50572d9da1ab0359
Move from a static implementation in tdef_vty.c to utils.c, I also want to use
this in osmo-msc.
The point is that the telnet VTY allows unambiguous partly matches of keyword
args. For example, if I have a command definition of:
compare (apples|oranges)
then it is perfectly legal as for the vty parser to write only
compare app
One could expect the VTY to then pass the unambiguous match of "apples" to the
parsing function, but that is not the case.
Hence a VTY function implementation is faced with parsing a keyword of "app"
instead of the expected "apples".
This is actually a very widespread bug in our VTY implementations, which assume
that exactly one full keyword will always be found. I am now writing new
commands in a way that are able to manage only the starts of keywords.
Arguably, strstr(a, b) == a does the same thing, but it searches the entire
string unnecessarily.
Change-Id: Ib2ffb0e9a870dd52e081c7e66d8818057d159513
Add global flag osmo_fsm_term_safely() -- if set to true, enable the following
behavior:
Detect osmo_fsm_inst_term() occuring within osmo_fsm_inst_term():
- collect deallocations until the outermost osmo_fsm_inst_term() is done.
- call osmo_fsm_inst_free() *after* dispatching the parent event.
If a struct osmo_fsm_inst enters osmo_fsm_inst_term() while another is already
within osmo_fsm_inst_term(), do not directly deallocate it, but talloc-reparent
it to a separate talloc context, to be deallocated with the outermost FSM inst.
The effect is that all osmo_fsm_inst freed within an osmo_fsm_inst_term()
cascade will stay allocated until all osmo_fsm_inst_term() are complete and all
of them will be deallocated at the same time.
Mark the deferred deallocation state as __thread in an attempt to make cascaded
deallocation handling threadsafe. Keep the enable/disable flag separate, so
that it is global and not per-thread.
The feature is showcased by fsm_dealloc_test.c: with this feature, all of those
wild deallocation scenarios succeed.
Make fsm_dealloc_test a normal regression test in testsuite.at.
Rationale:
It is difficult to gracefully handle deallocations of groups of FSM instances
that reference each other. As soon as one child dispatching a cleanup event
causes its parent to deallocate before fsm.c was ready for it, deallocation
will hit a use-after-free. Before this patch, by using parent_term events and
distinct "terminating" FSM states, parent/child FSMs can be taught to wait for
all children to deallocate before deallocating the parent. But as soon as a
non-child / non-parent FSM instance is involved, or actually any other
cleanup() action that triggers parent FSMs or parent talloc contexts to become
unused, it is near impossible to think of all possible deallocation events
ricocheting, and to avoid running into freeing FSM instances that were still in
the middle of osmo_fsm_inst_term(), or FSM instances to enter
osmo_fsm_inst_term() more than once. This patch makes deallocation of "all
possible" setups of complex cross referencing FSM instances easy to handle
correctly, without running into use-after-free or double free situations, and,
notably, without changing calling code.
Change-Id: I8eda67540a1cd444491beb7856b9fcd0a3143b18
To prevent re-entering osmo_fsm_inst_term() twice for the same osmo_fsm_inst,
add flag osmo_fsm_inst.proc.terminating. osmo_fsm_inst_term() sets this to
true, or exits if it already is true.
Update fsm_dealloc_test.err for illustration. It is not relevant for unit
testing yet, just showing the difference.
Change-Id: I0c02d76a86f90c49e0eae2f85db64704c96a7674
We have a habit of returning static buffers from some functions,
particularly when generating some kind of string values. This is
convenient in terms of memory management, but it comes at the expense
of not being thread-safe, and not allowing for two calls of the
related function within one printf() statement.
Let's introduce _c suffix versions of those functions where the
caller passes in a talloc context from which the output buffer shall
be allocated.
Change-Id: I8481c19b68ff67cfa22abb93c405ebcfcb0ab19b
As per 3GPP TS 03.40, section 9.2.3.16 "TP-User-Data-Length (TP-UDL)"
field may contain up to 140 octets (or 140 * 8 / 7 = 160 septets).
Change-Id: I54f88d2908ac47228813fb8c049f4264e5145241
Provide a common implementation of use counting that supports naming each user
as well as counting more than just one use per user, depending on the rules the
caller implies.
In osmo-msc, we were originally using a simple int counter to see whether a
connection is still in use or should be discarded. For clarity, we later added
names to each user in the form of a bitmask of flags, to figure out exactly
which users are still active: for logging and to debug double get / double put
bugs. This however is still not adequate, since there may be more than one CM
Service Request pending. Also, it is a specialized implementation that is not
re-usable.
With this generalized implementation, we can:
- fix the problem of inadequate counting of multiple concurrent CM Service
Requests (more than one use count per user category),
- directly use arbitrary names for uses like __func__ or "foo" (no need to
define enums and value_string[]s),
- re-use the same code for e.g. vlr_subscr and get fairly detailed VLR
susbscriber usage logging for free.
Change-Id: Ife31e6798b4e728a23913179e346552a7dd338c0
For handling RTP IP addresses and ports, osmo-mgw, osmo-bsc and osmo-msc
so far have their own separate shims and code duplication around
inet_ntoa(), htons(), sockaddr conversions etc. Unify and standardize
with this common API.
In the MGW endpoint FSM that was introduced in osmo-bsc and which I
would like to re-use for osmo-msc (upcoming patch moving that to
osmo-mgw), it has turned out that using char* IP address and uint16_t
port number types are a convenient common denominator for logging,
MGCP message composition and GSM48. Ongoing osmo-msc work also uses this
for MNCC.
This is of course potentially useful for any other IP+port combinations
besides RTP stream handling.
Needless to say that most current implementations will probably stay
with their current own conversion code for a long time; for current
osmo-{bsc,msc,mgw} work (MGW endpoint FSM) though, I would like to move
to this API here.
Change-Id: Id617265337f09dfb6ddfe111ef5e578cd3dc9f63
We have a number of static buffers in use in libosmo*. This means
the related functions are not usable in a thread-safe way. While
we so far don't have many multi-threaded programs in the osmocom
universe, the static buffers also prevent us from calling the same
e.g. string-ify function twice within a single printf() call.
Let's make sure there's an alternative function in all those cases,
where the user can pass in a caller-allocated buffer + size, and make
the 'classic' function with the static buffer a wrapper around that
_buf() variant.
Change-Id: Ibf85f79e93244f53b2684ff6f1095c5b41203e05
osmo_escape_str_buf() used to have the somewhat odd semantics that
if no escaping was needed, it would return the original pointer without
making any copy to the output buffer. While this seems like an elegant
optimization, it is a very strange behavior and it works differently
than all of our other *_buf() functions. Let's unify the API and
turn osmo_escape_str_buf() into a strlcpy() if no escaping is needed.
Change-Id: I3a02bdb27008a73101c2db41ac04248960ed4064
Doxygen was confused by duplicated documentation for both
definition and declaration of rate_ctr_for_each_counter().
Moreover, both variants contained some mistakes.
Let's avoid this duplication and keep the only (corrected) one.
Change-Id: Icca2d4a95bd5f96ae85a86909ec90fb8677cacf3
core/msgb.h:414: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_pull_to_l2(struct msgb *msg)
core/msgb.h:399: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_pull_to_l3(struct msgb *msg)
core/msgb.h:351: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u16(struct msgb *msg, uint16_t word)
core/msgb.h:361: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u32(struct msgb *msg, uint32_t word)
core/msgb.h:341: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u8(struct msgb *msg, uint8_t word)
Change-Id: I5d660933ecfa89c631319eccf9e3d5c1986ec8ff
Thanks to the following Doxygen warning:
msgb.h:XXX: warning: The following parameters of
msgb_eq_l2(msg1, msgb2, len) are not documented:
parameter 'msgb2'
parameter 'len'
it was discovered that parameter 'len' is not required at all.
It basically doesn't make any sense to pass any length value,
because it can be calculated using msgb_length().
Let's drop this parameter. Given that this part of the API was
broken so far (see I1079d629abdb8770eef6be7341e586a933cd9cca),
it should be more or less safe to do this.
Change-Id: Icd9b72eb6bfa9628ff1ed2f948b57058551a4328
Neither Doxygen documentation of the msgb data comparison helpers,
nor their actual definitions does refer msgb2. Instead, 'msg2' is
referenced in both cases. This was discovered while investigating
the following Doxygen warnings:
msgb.h:XXX: warning: argument 'msg2' of command @param is not
found in the argument list of
msgb_eq(msg1, msgb2, len)
msgb.h:XXX: warning: The following parameters of
msgb_eq_l2(msg1, msgb2, len) are not documented:
parameter 'msgb2'
parameter 'len'
Due to this bug it was impossible to use the affected macros,
because 'msg2' was not listed in their parameters. Having the
unit test coverage would spot this bug at the beginning!
Change-Id: I1079d629abdb8770eef6be7341e586a933cd9cca
- drop incorrect \ref and \a references;
- add missing documentation to LLIST_HEAD_INIT;
- document parameter 'member' of llist_entry();
- turn @argument naming into a valid \param format;
- fix 'type *' vs llist_head loop counter confusion;
- capitalize and dot-terminate all sentences.
Change-Id: Iac67bdb9d5fbf7c222d04858967337f2428d6a94
The naming of these constants dates back to when the code was private
within OpenBSC. Everything else was renamed (bsc_fd -> osmo_fd) at
the time, but somehow the BSC_FD_* defines have been missed at the
time.
Keep compatibility #defines around, but allow us to migrate the
applications to a less confusing naming meanwhile.
Change-Id: Ifae33ed61a7cf0ae54ad487399e7dd2489986436
The function gsm0808_sc_cfg_from_gsm48_mr_cfg() takes an S15 to S0
bitmask and converts that bitmask into an AMR multirate configuration
struct.
Unfortunately the current implementation implements 3GPP TS 28.062,
Table 7.11.3.1.3-2 wrongly in some aspects. Lets fix this.
- Fix wrong interpretation of the bitpatterns
- 5,15K is invalid and must never be selected
- Make sure that no more than 4 rates are selected in the active set
- Extend unit-test
Change-Id: I6fd7f4073b84093742c322752f2fd878d1071e15
Related: SYS#4470
CGI to Cell ID: for example, for Paging, osmo-msc has a CGI for a subscriber
and needs to send out a Cell Identifier IE. Makes sense to add this conversion
here.
Cell ID to CGI: for a Layer 3 Complete, a subscriber sends the current cell in
the form of a Cell Identifier, which we store as a CGI, if necessary enriched
with the local PLMN.
Add enum with bitmask values to identify parts of a CGI, for the return value
of gsm0808_cell_id_to_cgi(). Can't use enum CELL_IDENT for that, because it
doesn't have a value for just a PLMN (and is not a bitmask).
Change-Id: Ib9af67b100c4583342a2103669732dab2e577b04
During FSM design for osmo-msc, I noticed that the current behavior that
keep_timer=true doesn't guarantee a running timer can make FSM design a bit
complex, especially when using osmo_tdef for timeout definitions.
A desirable keep_timer=true behavior is one that keeps the previous timer
running, but starts a timer if no timer is running yet.
The simplest example is: a given state repeatedly transitions back to itself,
but wants to set a timeout only on first entering, avoiding to restart the
timeout on re-entering.
Another example is a repeated transition between two or more states, where the
first time we enter this group a timeout should start, but it should not
restart from scratch on every transition.
When using osmo_tdef timeout definitions for this, so far separate meaningless
states have to be introduced that merely set a fixed timeout.
To simplify, add osmo_fsm_inst_state_chg_keep_or_start_timer(), and use this in
osmo_tdef_fsm_inst_state_chg() when both keep_timer == true *and* T != 0.
In tdef_test.ok, the changes show that on first entering state L, the previous
T=1 is now kept with a large remaining timeout. When entering state L from O,
where no timer was running, this time L's T123 is started.
Change-Id: Id647511a4b18e0c4de0e66fb1f35dc9adb9177db
fi->T values are int, i.e. can be negative. Do not log them as unsigned, but
define a distinct timer class "Xnnnn" for negative T values: i.e. for T == -1,
print "Timeout of X1" instead of "Timeout of T4294967295".
The negative T timer number space is useful to distinguish freely invented
timers from proper 3GPP defined T numbers. So far I was using numbers like
T993210 or T9999 for invented T, but X1, X2 etc. is a better solution. This way
we can make sure to not accidentally define an invented timer number that
actually collides with a proper 3GPP specified timer number that the author was
not aware of at the time of writing.
Add OSMO_T_FMT and OSMO_T_FMT_ARGS() macros as standardized timer number print
format. Use that in fsm.c, tdef_vty.c, and adjust vty tests accordingly.
Mention the two timer classes in various API docs and VTY online-docs.
Change-Id: I3a59457623da9309fbbda235fe18fadd1636bff6
Add a flag that adds timeout info to osmo_fsm_inst state change logging.
To not affect unit testing, make this an opt-in feature that is disabled by
default -- mostly because osmo_fsm_inst_state_chg_keep_timer() will produce
non-deterministic logging depending on timing (logs remaining time).
Unit tests that don't verify log output and those that use fake time may also
enable this feature. Do so in fsm_test.c.
The idea is that in due course we will add osmo_fsm_log_timeouts(true) calls to
all of our production applications' main() initialization.
Change-Id: I089b81021a1a4ada1205261470da032b82d57872
The NS implementation part of the Gb implementation libosmogb
so far implemented a rather classic dialect of Gb, with lots of
heritage to FR (Frame Relay) transports. At least since Release 6
of the NS specification, there's an IP Sub-Network Service (SNS),
which
* permits for dynamic configuration of IP endpoints and their NS-VCs
* abandons the concept of a NSVCI on IP transport
* forbids the use of RESET/BLOCK/UNBLOCK procedures on IP transport
This commit introduces BSS-side IP-SNS support to libosmogb in a
minimally invasive way. It adds a corresponding SNS FSM to each NS
instance, and implements the new SIZE/CONFIG/ADD/DELETE/CHANGE_WEIGHT
procedures very closely aligned with the spec.
In order to use the SNS flavor (rather than the classic one),
a BSS implementation should use gprs_ns_nsip_connect_sns() instead
of the existing gprs_ns_nsip_connect().
This implementation comes with a set of TTCN-3 tests in
PCU_Tests_RAW_SNS.ttcn, see Change-ID
I0fe3d4579960bab0494c294ec7ab8032feed4fb2 of osmo-ttcn3-hacks.git
Closes: OS#3372
Closes: OS#3617
Change-Id: I84786c3b43a8ae34ef3b3ba84b33c90042d234ea
Modern NS specifications contain a SNS (Sub Network Service) for
negotiating IP/port/weight parameters of NS-over-IP links dynamically.
This patch adds message encoding routines for SNS-CONFIG, SNS-SIZE
and their respective acknowledgements.
Related: OS#3372
Change-Id: I5c47e1c3c10deb89a7470ee2c03adfc174accc93
It should be large enough to prepend a struct osmo_scu_prim to pass down an
SCCP stack (see libosmo-sccp). 264 should suffice, but pick the next larger
power-of-two instead.
In osmo-msc, I would like to prepend an osmo_prim to the msgb created by
gsm0808 API, but turns out the headroom is too small:
msgb(0x61700001b660): Not enough headroom msgb_push (126 < 264)
Instead of always copying a msgb that has just that instant been created, it
makes more sense to allocate sufficient headroom in the first place.
Change-Id: I95729991eb49555f8bba60c5dc916131b03b6cf2
Add functions to dump LCLS (without GCR) and GCR. Dumping entire struct
results in inconveniently long string hence the separate functions. Both
use talloc functions so they expect caller to take care of providing
proper allocation context and freeing memory.
Change-Id: Ic3609224c8f3282d667e75f68bc20327e36eb9e6
The symbols for those functions were always exported, but we
somehow didn't declare them in gprs_ns.h
Change-Id: Ib073e9c93fcdf408b63000182e90aabce37f687e
We are using macros like this or different workarounds in libmsc. In the course
of implementing inter-MSC handover, I am encountering yet another such
situation of appending multiple strings to a limited char buffer. Standardize.
Add a unit test to utils_test.c.
Change-Id: I2497514e26c5e7a5d88985fc7e58343be1a027b2
This is from TS 08.08 3.2.2.11 directly. The choices for Data mode
and Speech mode were already present, but not for Signalling mode
Change-Id: I9e24841ea877a9a78dc4d2bd14cbf60c4bea79a6
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
In OsmoMSC, it's required to be able to specify a particular GSM 04.07
transaction ID for GSM 04.80 Release complete message instead of the
hard-coded value, that is used gsm0480_create_ussd_release_complete().
Let's finally deprecate gsm0480_create_ussd_release_complete(), and
introduce a new function without USSD prefix, as this message
is also used in other "structured" supplementary services.
Change-Id: Ie3ac85fcef90a5e532334ba3482804d5305c88d7
When a call that was established in a CSFB context ends the CLEAR
COMMAND that is send from the BSC to the MSC should contain a CSFB
indication IE, which consists of just the IE byte itsslef. This
additional IE tells the BSC to include other CSFB related IEs into the
RR Release message.
Change-Id: Id8a75e1da2d5f520064666e4ee413d1c91da6ae3
Related: OS#3778
This is similar to msgb_tailroom(): It returns the amount of space
left at the end of the bit vector (compared to the current cursor).
The function returns the number of bits left in the bitvec.
Change-Id: I8980a6b6d1973b67a2d9ad411c878d956fb428d1
Move T_def from osmo-bsc to libosmocore as osmo_tdef. Adjust naming to be more
consistent. Upgrade to first class API:
- add timer grouping
- add generic vty support
- add mising API doc
- add C test
- add VTY transcript tests, also as examples for using the API
From osmo_fsm_inst_state_chg() API doc, cross reference to osmo_tdef API.
The root reason for moving to libosmocore is that I want to use the
mgw_endpoint_fsm in osmo-msc for inter-MSC handover, and hence want to move the
FSM to libosmo-mgcp-client. This FSM uses the T_def from osmo-bsc. Though the
mgw_endpoint_fsm's use of T_def is minimal, I intend to use the osmo_tdef API
in osmo-msc (and probably elsewhere) as well. libosmocore is the most sensible
place for this.
osmo_tdef provides:
- a list of Tnnnn (GSM) timers with description, unit and default value.
- vty UI to allow users to configure non-default timeouts.
- API to tie T timers to osmo_fsm states and set them on state transitions.
- a few standard units (minute, second, millisecond) as well as a custom unit
(which relies on the timer's human readable description to indicate the
meaning of the value).
- conversion for standard units: for example, some GSM timers are defined in
minutes, while our FSM definitions need timeouts in seconds. Conversion is
for convenience only and can be easily avoided via the custom unit.
By keeping separate osmo_tdef arrays, several groups of timers can be kept
separately. The VTY tests in tests/tdef/ showcase different schemes:
- tests/vty/tdef_vty_test_config_root.c:
Keep several timer definitions in separately named groups: showcase the
osmo_tdef_vty_groups*() API. Each timer group exists exactly once.
- tests/vty/tdef_vty_test_config_subnode.c:
Keep a single list of timers without separate grouping.
Put this list on a specific subnode below the CONFIG_NODE.
There could be several separate subnodes with timers like this, i.e.
continuing from this example, sets timers could be separated by placing
timers in specific config subnodes instead of using the global group name.
- tests/vty/tdef_vty_test_dynamic.c:
Dynamically allocate timer definitions per each new created object.
Thus there can be an arbitrary number of independent timer definitions, one
per allocated object.
T_def was introduced during the recent osmo-bsc refactoring for inter-BSC
handover, and has proven useful:
- without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be
programmed with the right timeout value, for all code paths that invoke this
state change. It is a likely source of errors to get one of them wrong. By
defining a T timer exactly for an FSM state, the caller can merely invoke the
state change and trust on the original state definition to apply the correct
timeout.
- it is helpful to have a standardized config file UI to provide user
configurable timeouts, instead of inventing new VTY commands for each
separate application of T timer numbers.
Change-Id: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5
Provide a va_list type vty_out() variant, to be able to pass on variable
arguments from other function signatures to vty_out().
This will be used by Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 for osmo_tdef.
Change-Id: Ie6e6f11a6b794f3cb686350c1ed678e4d5bbbb75
socket.h uses INET6_ADDRSTRLEN without including arpa/inet.h where it's
defined which might break external users of socket.h
Fix this by adding missing include. The error was introduced in
64b51eb68b
Change-Id: I2883addcb81cec038577e401e356e8f07a947d4c
Replace osmo_gsup_get_err_msg_type() with a wrapper to
OSMO_GSUP_TO_MSGT_ERROR(). This macro assumes, that all error messages
are (request message | 0x000001). Add a big comment header for
osmo_gsup_message_type, describing this already implicitly followed rule
and therefore making it explicit.
With this change, we don't need to maintain the request -> error message
mapping in osmo_gsup_get_err_msg_type() anymore.
Related: Iec1b4ce4b7d8eb157406f006e1c4241e8fba2cd6 (osmo-gsm-manuals)
Change-Id: I46d9f2327791978710e2f90b4d28a3761d723d8f
osmo-bsc and osmo-msc implement identical Classmark structures. It makes sense
to define once near the gsm48 protocol definitions.
Also move along some generic Classmark API from osmo-msc.
Change-Id: Ifd27bab0380f7ad0c44c719aa6c8bd62cf7b034c
Add osmo_hexdump_buf() as an all-purpose hexdump function, which all other
osmo_hexdump_*() implementations now call. It absorbs the static
_osmo_hexdump(). Add tests for osmo_hexdump_buf().
Rationale: recently during patch review, a situation came up where two hexdumps
in a single printf would have been useful. Now I've faced a similar situation
again, in ongoing development. So I decided it is time to provide this API.
The traditional osmo_hexdump() API returns a non-const char*, which should
probably have been a const instead. Particularly this new function may return a
string constant "" if the buf is NULL or empty, so return const char*. That is
why the older implementations calling osmo_hexdump_buf() separately return the
buffer instead of the const return value directly.
Change-Id: I590595567b218b24e53c9eb1fd8736c0324d371d
Add
* osmo_lai_cmp() (to use in gsm0808_cell_id_u_matches())
* osmo_cgi_cmp() (to use in gsm0808_cell_id_u_matches())
* gsm0808_cell_id_u_match() (to re-use for single IDs and lists)
* gsm0808_cell_ids_match()
* gsm0808_cell_id_matches_list()
* Unit tests in gsm0808_test.c
Rationale:
For inter-BSC handover, it is interesting to find matches between *differing*
Cell Identity kinds. For example, if a cell as CGI 23-42-3-5, and a HO for
LAC-CI 3-5 should be handled, we need to see the match.
This is most interesting for osmo-msc, i.e. to direct the BSSMAP Handover
Request towards the correct BSC or MSC.
It is also interesting for osmo-bsc's VTY interface, to be able to manage
cells' neighbors and to trigger manual handovers by various Cell Identity
handles, as the user would expect them.
Change-Id: I5535f0d149c2173294538df75764dd181b023312
The longest BCd-digit type identity is the IMEISV with 16, so there's
no point in trying to parse up to 255 decimal digits, which will do
nothing but to overflow the caller-provided output buffer.
Let's also clearly define the required minimum size of the output
buffer and add a reltead #define for it.
Change-Id: Ic8488bc7f77dc9182e372741b88f0f06100dddc9
This resolves an issue introduced in 84fb5bb6a0
when msgb_wrap_with_TL() was introduced as an inline function with
*exactly the same name* as in osmo-msc.git and openbsc.git. We *NEVER*
do something like this. Functions moved from applications to library
*MUST* always be renamed. This has been the case for almost a decade
now.
With this subsequent change we make sure the libosmocore function
has a different name and doesn't clash. After this commit, old
openbsc.git and osmo-bsc.git should again build fine.
Change-Id: If1e851ac605c8d2fde3da565b0bd674ea6350c2e
They only make sense in the context of LCLS so far - let's make sure
they're not used by external projects directly instead of gsm0808_*()
counterparts.
Change-Id: I4ae5a3472a20492d5f76170b722e4e2274a5c433
Most of the time we'll have GCR filled anyway so it make sense to have
it as static parameter instead of a pointer to separately allocated
structure. Update tests to cover both static and dynamic osmo_lcls
allocation variants.
Change-Id: I905c36d8455911c68c30bc429379b7313dd46aea
* add gsm0808_create_ass_compl2() with additional gsm0808_lcls_status
parameter and make gsm0808_create_ass_compl() into trivial wrapper
around it
* update tests accordingly
Change-Id: I547c6b8707123aa8c1ef636db88908df112d90a4
Related: OS#2487
The function osmo_sock_get_name_buf() can be used to write a string
representation to a user provided memory. Unfortunately the proper
length for the user provided memory is not obvious. To make using
osmo_sock_get_name_buf() more practical, add a define constant that
defines the length of the required memory. Also use this define in
socket.c.
Change-Id: If8be8c2c0d4935da17ab13b2c2127b719ceefbcc
Prepare handling multiple CM Service Requests in osmo-msc: an enum is more
clear than an int and #defines for passing around and count CM Service types.
Change-Id: I9c2a7adc45ab7a1a7519168e965e7d805e1481ff
Verify 14 digit and 15 digit IMEI strings. OsmoHLR will use the 14
digit version to check IMEIs before writing them to the DB.
Place the Luhn checksum code in a dedicated osmo_luhn() function, so
it can be used elsewhere.
Related: OS#2541
Change-Id: Id2d2a3a93b033bafc74c62e15297034bf4aafe61
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports osmo-bsc code for encoding SI rest octets.
The conversion was a bit tricky in some places because some
functions receive a 'struct gsm_bts' parameter in osmo-bsc.
In this libosmocore version, such functions expect parameters
which correspond to the individual fields of 'struct gsm_bts'
which are used by these functions.
Several structs from osmo-bsc's system_information.h are now
also declared in libosmocore headers, with an added osmo_ prefix
to avoid collisions with existing definitions in osmo-bsc.
Some helpers were ported from osmo-bsc's system_information.c
to libosmocore's gsm48_rest_octets.c. Contrary to osmo-bsc's
implementation they are now only visible within this file.
Unfortunately, this code ported from osmo-bsc lacks unit tests.
Change-Id: I47888965ab11bba1186c21987f1365c9270abeab
Related: OS#3075
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports one of the prerequisites for doing so:
osmo-bsc code for range-encoding ARFCNs, including tests.
An osmo_gsm48_ prefix has been prepended to public symbols in
order to avoid clashes with existing symbols in osmo-bsc code.
Change-Id: Ia220764fba451be5e975ae7c5eefb1a25ac2bf2c
Related: OS#3075
Note that OSMO_GSUP_IMEI_RESULT_ACK is 0 on the wire, although the
enum value is 1. Same with NACK (1 on wire, enum 2).
I had implemented enum osmo_gsup_imei_result after
enum osmo_gsup_cancel_type above, where this comment exists as well,
and I incorrectly assumed that enum osmo_gsup_cn_domain in the middle
was also implemented this way and therefore adding the comments to each
enum would be redundant. But for cn_domain, the values on the wire are
the same as the enum values.
Change-Id: If97c34f117bfaab2232bbb625e9d118c8f390e58
We have gsm48_mi_to_string() and osmo_bcd2str(), but still lack a function that
conveniently prints both MI type and value in one function call.
Related: http://people.osmocom.org/neels/mi_mi_mi.jpg
Change-Id: I7798c3ef983c2e333b2b9cbffef6f366f370bd81
Previously it could encode both incorrect values as well as incorrect
message. Let's fix this by explicitly checking for invalid values and
ensuring that at least one of the parameters is valid.
This function have no external or internal users so it's better to fix
type signature as well to match the rest of gsm0808_create_lcls_*().
Change-Id: I7b33a771acbd391c5f9a494d6450edb18511433f
In the MSC, we have RAN types GERAN_A and UTRAN_IU, now we need a similar enum
in osmo-hlr's GSUP client.
Naming: in the MAP specifications, the RAN type is mostly called RAT type,
(Radio Access Network vs. Radio Access Technology?). Since GSUP is more about
MAP messages, I'm calling the enum osmo_rat_type.
Rationale: osmo-msc and osmo-sgsn want to tell the osmo-hlr which RAT a
subscriber is calling on. A subsequent patch will extend the GSUP protocol and
add a RAT types IE.
Change-Id: I659687aef7a4d67ca372a39fef31dee07aed7631
Using an FSM instace's logging context is very useful. Sometimes it makes sense
to log something on a different logging category than the FSM definition's
default category.
For example, an MSC conn has aspects concerning MM, CC, RR, MGCP, ..., and
currently all of those log on DMM.
This came up in I358cfbaf0f44f25148e8b9bafcb9257b1952b35a, where I want to log
an MGCP event using a ran_conn context, and used the conn->fi->id. That of
course omits context like the current conn FSM state...
I remember at least one other place where I recently added logging using some
fi->id as context, so it might turn out useful in various places.
Change-Id: I11b182a03f5ecb6df7cd8f260757d3626c8e945d
The LOGPFSM macros are in such wide use that they should guard against a NULL
fi pointer. In case of NULL, default to subsys = DLGLOBAL, loglevel =
LOGL_ERROR and state = "fi=NULL".
Change-Id: I9eaf8b7e2cf1e450ae626cb2fc928862008f6233
In 3GPP TS 48.008 the Global Call Reference IE is only used in HANDOVER
REQUEST (§3.2.1.8) and ASSIGNMENT REQUEST (§3.2.1.1) messages which
also include LCLS Config and CSC parameters. Hence, there's no point in
using GCR encode/decode functions alone.
Introduce gsm0808_dec_lcls() and gsm0808_enc_lcls() as trivial wrappers
on top of GCR enc/dec routines which are made static. Adjust tests
accordingly. Test output intentionally left unchanged.
Change-Id: Icfbb2404e1a1d500243e2071173299b557369335
Instead of duplicating the fmt and args in LOGPFSML and LOGPFSMLSRC, rather
make LOGPFSML invoke LOGPFSMLSRC with __FILE__ and __LINE__.
This is a cosmetic preparation for more tweaks coming up.
Change-Id: I2f23c57ebfdb5355919c06ac5ded7732e3b17a97
Extend the vty_bind_cmd VTY command to allow to optionally specify
a port in addition to the IPv4 address.
Introduce telnet_init_default to relieve client code from having
to query the bind IPv4 address (and now the TCP port). Instead a
client only needs to pass the default TCP port to use.
Client code should use it like:
int rc = telnet_init_default(ctx, priv, OSMO_VTY_PORT_SGSN);
Change-Id: Id5fb2faaf4311bd7284ee870526a6f87b7e260f3
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Simplify gsup_test.c by defining an end marker in gsup.h. No need to
manually update the last element every time anymore.
The C standard guarantees, that the end marker will have the last value
plus one: "Each subsequent enumerator with no = defines its enumeration
constant as the value of the constant expression obtained by adding 1 to
the value of the previous enumeration constant." (From C99: 6.7.2.2
Enumeration specifiers)
Change-Id: I2aab7245e209f0ebd2f33a83d4d181dd3339cb17
Similar to existing 16 and 32 bit value helpers but simpler because we
don't have to worry about alingment and endianness.
Change-Id: Ic0a148bd04b8860e321f509fdcd913f688c8e920
The name "LAI AND LAC" makes no sense because a LAC
is part of a LAI. Keep the old name available for
API backwards compatibility.
Change-Id: I2749cf75b7b45de0cd43cf4c696a6b6984f5a065
Related: OS#3124
This is 1:1 the result of doing
cd libosmocore
./contrib/struct_endianess.py
git commit -a
Running struct_endianess.py again should result in no changes.
That means we could include such a check in the gerrit verification job now.
Change-Id: Ia0b99d76932aeb03e93bd0c62d3bf025dec5f9d2
Basically, I am applying code review that I would have given had I not been on
vacation when the last osmo_sock_get_name* stuff was merged.
osmo_sock_get_name2() is so far a static internal function. However, it is
nothing like osmo_sock_get_name(), so instead rename it to
osmo_sock_get_ip_and_port(). Also make it public API, no need to hide it. I'm
adding an "and" in the name to hopefully clarify: "ip_port" vs. "ip_and_port"
-- there already are _get_X_ip_port() functions that only return the port
string, despite "ip" in the name.
Add new public osmo_sock_get_name2(), which is like osmo_sock_get_name(),
except it uses a static string instead of talloc, and omits the braces. This
is most convenient for log statement formats, avoiding dyn allocations.
Add new osmo_sock_get_name_buf(), which is like osmo_sock_get_name2() but
writes to a caller provided char buffer.
Use osmo_sock_get_name_buf() in the implementation of osmo_sock_get_name(),
but use another (non-static) local string buffer, because adding braces is too
complex without talloc_snprintf().
Rationale:
I want to improve the logging of socket errors, e.g. change
DLMGCP ERROR Failed to read: 111/Connection refused (mgcp_client.c:720)
to
DLMGCP ERROR Failed to read: r=10.0.99.2:2427<->l=10.0.99.2:2728: 111='Connection refused' (mgcp_client.c:721)
but it is just not handy to compose logging with the current API:
- osmo_sock_get_name() requires a talloc_free().
- all the others require output buffers.
- the only way to conveniently compose a logging string and,
- notably, the only trivial way to skip the string composition if the logging
level is currently muted, is to have a function that returns a static string:
the new osmo_sock_get_name2().
- (I think the osmo_sock_get_{local,remote}_* convenience wrappers should never
have been added, because they encourage the caller to invoke the same code
twice, for IP addr and port, and throw away one half each time.)
Related: Iae728192f499330d16836d9435648f6b8ed213b6 (osmo-mgw)
Change-Id: I8ad89ac447c9c582742e70d082072bdd40a5a398
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add functions to encode Global Call. Ref. from TS 29.205 as 3GPP TS
48.008 §3.2.2.115 information element
* add corresponding tests
Change-Id: I82ce0207dc8de50689a8806c6471ad7fbae6219d
Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
It's often handy to compare certain msgb layer to a given array and
print the position where they differ. Add simple pretty-printer and
corresponding L* wrappers.
Change-Id: I3bc95f2f5ab6e3f4b502647fb3e0aaaf1f7c4cf5
Add a standalone bcd-to-string conversion function with generic parameters.
Add a regression test in utils_test.c.
So far there is no single universal implementation that converts a BCD to a
string. I could only find gsm48_mi_to_string(), which also interprets
surrounding bytes, MI type and TMSI as non-BCD value.
The idea is to use this function from gsm48_mi_to_string() and similar
implementations in subsequent commits.
Root cause: in osmo-msc, I want to have an alternative MI-to-string function
for composing an FSM name, which needs the BCD part of gsm48_mi_to_string() but
not the TMSI part.
Change-Id: I86b09d37ceef33331c1a56046a5443127d6c6be0
Counting list entires should not alter the list content: let's make this
obvious from type signature.
Change-Id: I414e67a3de733fab407161b3264d3b89070ba537
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
We already have some GSM29118 related definitions and functions in
libosmocore. Lets also add some functions to generate GSM29118 messages
(similar to those we have for GSM0808).
Change-Id: Ic87f8a771b87b52215d0a7451b67794557b80b8a
Related: OS#3615
The specification defines a default port where the SGs interface should
be reachable. Lets add a define-constant for it.
Change-Id: Ia4b9f547dd980411d15b2691b7f535fa0463f0f1
Related: OS#3615
It's similar to osmo_sockaddr_to_str_and_uint() but does not require odd
typecasting for AF_INET case. Make osmo_sockaddr_to_str_and_uint() into
wrapper around new function and make sure to check for address family
before typecasting. Also use proper return type.
Change-Id: Ie384483124d407a960ab6732e6a7fd90554389d2
The value string arrays in the header file (gsm_29_118.h) are not
declared as extern. Lets add it now.
Change-Id: Ib6c4cbea649f790fa4db1ed2fe2b7e76a60291b4
Related: OS#3615
When adding complex TLV structures where length of V is not known in
advance it's handy to be able to simply add Tag and save the pointer to
the Length field so it can be updated once entire Value is added and its
length is known.
Change-Id: I8dc1e4880352833a0a49c1dd0d7cb4148ac43aff
We always use id = 0 when sending TRAP messages. Let's make this more
obvious by introducing appropriate define.
Change-Id: I33d7d4c6a1885a75a85d6f2f017430e0860b4126
* add missing L1 and L4 hexdump
* add msgb_l4() for consistency and convert msgb_sms() into simple alias
Those will be used in follow-up patches for msgb debug/test helpers.
Change-Id: I8d6dd1b1ff3aa98a452711c692ca7dee0449203b
We currently have no generator function that can generate BSSMAP
HANDOVER PERFORMED messages. Lets add function for this.
Change-Id: I825106858bd89afc9837811b8fed2e8accc82441
Related: OS#3645
ARFCNs are values in well defined ranges. Until this patch, ARFCNs not
belonging to any band were blindly assigned to DCS1800 by
gsm_arfcn2band, causing unnoticed bugs and misconfigurations in
osmo-bsc.
Previous API gsm_arfcn2band cannot accomodate this kind of check easily,
so let's deprecate it to tell people to use a new API gsm_arfcn2band_rc
which performs this kind of checks and allows callers to log failures,
misconfigurations, etc.
At the same time, modify implementation of gsm_arfcn2band to abort if an
invalid ARFCN is passed, this way users of this API can notice they are
passing wrong data to it that most probably will produce unexpected
results.
Related: OS#3063
Change-Id: I780d452dcebce385469e32ef2fd844df6033393a
It's convenient to hold all LCLS-related parameters from 3GPP TS 48.008
in a single structure.
This will be used in follow-up patch handling Assignment Request with
extended parameters as well as corresponding BSC code working with LCLS.
Change-Id: I4b873f9a3c5a5d33b438382971b3d92e40d48d62
Related: OS#2487
These are actually parts of the struct in big endian order, which will soon be
done automatically by struct_endianess.py.
Change-Id: I9bc694f10fa9cef0bb7fc791bb40e7602459b16b
That's necessary for 'struct tlv_parsed' definition although lack of it
does not cause build failure in libosmocore for me but does so for
osmo-bsc.
Change-Id: I3b2d3955d02b07dc7ec5e9f0c66cc477196703ed
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
The msgb_wrap_with_TL() is generally useful so it make sense to make it
public to facilitate code re-use.
Other helpers can be implemented as trivial wrappers over existing tlv.h
functions. Update headers and code accordingly.
Change-Id: I37e91d031fba28cf1c6735b8069b0265746f55e6
Add values indicating that LCLS control/config/status value has not been
received yet.
Change-Id: I52dc6a52f5ee043ed2c1625ffecfd495e3c746b1
Related: OS#2487
* add Class definitions
* add helper to check for extended bit
* add helper to get Cause's Class
* use enum in gsm0808_cause_name() and gsm0808_create_cipher_reject() to
avoid confusion between class and cause
* update gsm0808_create_cipher_reject() comments
Change-Id: I31b31dfc22eb4b6b07089e1255246ac458125340
Related: OS#3187
The value strings for the SGSAP IEI are missing, lets add a set of value
strings and a function to retrieve them.
Change-Id: I2787303174f74ffba86675bce2c12f680d8ea708
Related: OS#3615
The header file gsm_29_118.h is defining variables of type struct
value_string, which is declared in core/utils.h. We should add an
include to utils.h to prevent confusion when the header is used.
Change-Id: I9f9bb62d29cd068820ad5aa677717bd448de3f4a
Related: OS#3615
There is already a group of similar functions for L1, L2 and L3,
but L4 was missing. The L4 is usually used for parsing of complex
L3 messages, such as SS/USSD and SMS.
This change introduces a similar halper for L4.
Change-Id: I755f2d654bbdad2a8b4f94df9023bdd370b07ae6
The function that generates the clear command takes a parameter
"reason", which is the cause code. Lets give it the name "cause" to have
a coherent naming scheme that matches the other functions and the 3gpp
specs.
Change-Id: I7b6c15e8fa8db13deef5041095944ca1c58fb99f
Return only the IP or port of either the local or remote connection,
not the whole set of IP and port of both the local and remote
connection like osmo_sock_get_name() does it. This is needed for
OS#2841, where we only want to print the remote IP.
Related: OS#2841
Change-Id: I6803c204771c59a2002bc6a0e6b79c83c35f87e1
It will allow to make code handling chan_nr values more easier to read
and less prone to errors.
union is used to be able to get the full octet in
case we need to pass it somewhere else or encode it.
An extra union is used in struct abis_rsl_common_hdr and others to allow
using fields directly while keeping API compatibility.
Change-Id: Icd6822021207270a00106c50f8ca6b93c1250df9
It will allow to make code handling link_id values more easier to read
and less prone to errors.
union is used to be able to get the full octet in
case we need to pass it somewhere else or encode it.
An extra union is used in struct abis_rsl_common_hdr to allow using fields
directly while keeping API compatibility.
Change-Id: Ibd75a493bcfdf46c028ea466867d0c0d83d46343
Wireshark GSMTAP dissector has LTE NAS subtypes for plain NAS messages
and NAS messages with security header. This commit adds definition for
these subtypes.
Change-Id: I49d15fb13299c1bcbe0fb7e50bf222294c7a49ef
Later release of 3GPP TS 36.331 added new LTE RRC channels. This commit
additionally defines LTE RRC message types existing in Release V15.3.0.
Change-Id: Ifa48b2227be15af04c9a4702d2025abcc660f0df
Add a function to convert S0-S15 bits to struct gsm48_multi_rate_conf,
which hold the codec settings for AMR.
Change-Id: I973736273c236eee84decf15868190e339c3fed4
Related: OS#3548
The enum gsm48_chan_mode has value strings, but no function to retrieve
those strings. Lets add one.
Change-Id: If715705e1ebdfcfdfae1c2099932f7bb8b3861a7
Since the CMD_ATTR_* flags are intended to be used in bitwise
operations, let's assign them proper values. Adding a new flag
(e.g. CMD_ATTR_FOO_BAR) could actually result in assigning 0x03
instead of expected (0x01 << 2).
Change-Id: I3b1badef830f7e6436a67673b5709ec33c060c68
Related: OS#3584
parameter cfg in gsm0808_sc_cfg_from_gsm48_mr_cfg() is used read only.
Lets add a const to make this clear to the compiler.
Change-Id: I31e8d273b070b0afc446a298299d4f502d6c396b
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
This resurrects change-id I4e656731b16621736c7a2f4e64d9ce63b1064e98
which was reverted in I9e0d405e303ed86d23703ca6362e958dddb2f861
due to gsm0808_test failing.
The test failure is fixed by properly clearing the struct
gsm48_multirate_cfg prior to running tests (add memset(0)).
Change-Id: Ia782e21c206c15e840226d79b4209d13658ee916
Related: OS#3548
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
3GPP TS 48.008 chapter 3.2.2.103 states that the configuration bits of
OFR_AMR_WB are coded as follows:
"S0, S2, S4 indicates the supported Codec Configurations. S1, S3, S5, S6,
S7 are reserved and coded with zeroes."
The current default setting of 0x3F violates this requirement. Lets set
the "forbidden" settings zu zero and keep only the allowed ones.
Change-Id: I4a481def59e9c98cfdcafc2b80c0ac7df0c14130
Completely drop the implementations of log_vty_command_{str,description}().
These functions have been public API once, marked as deprecated since
c65c5b4ea0 (March 2017). I considered to keep
them, or reduce them to useless stubs, but it is quite silly, really. These
functions are completely and utterly useless outside of libosmocore. Any
program linking these deserves to fail.
Re-implement vty logging level command gen, in logging_vty.c. logging.c is
simply the wrong place for that.
Introduce logging_internal.h to share logging definitions to logging_vty.c
without publishing as API.
Introduce static gen_logging_level_cmd_strs() to compose a list of category
arguments with their descriptions for VTY commands. Use osmo_talloc_asprintf()
instead of the previous error prone and chaotic strlen() counting method.
Do not dynamically generate log level arguments, just keep static strings. We
are super unlikely to ever change the log levels we have.
No changes in logging_vty_test.vty: proves that there is no functional change.
All of this, besides introducing basic sanity, is cosmetic preparation to be
able to re-use the generic command generation code for arbitrary commands with
category or level args (for deprecated and new keywords).
Rationale: I want to hide 'all' and 'everything' from the VTY command
documentation, by means of deprecating. I first tried to simply define a
deprecated 'logging level CAT everything' command:
logging level (all|rsl|rr|...) (debug|info|notice|error|fatal)
logging level CAT everything # <- deprecated and hidden
But unfortunately, command matching doesn't work as intended when the CAT
argument reflects a valid category; I want it to invoke the deprecated function
as soon as the 'everything' keyword follows, but it stays stuck to the "valid"
command when the category argument matches an explicit keyword in that list,
and will throw an error on the following 'everything' keyword. I.e.:
logging level rsl everything
% Unknown command # <-- leads to config file parse error
logging level unknown_string everything
% Ignoring deprecated 'everything' # <-- works only for invalid categories
So I need to define 'everything' separately, again with a list of each valid
category instead of a generic CAT arg.
Change-Id: I3b083f27e3d751ccec258880ae7676e9af959a63
We already have osmo_str2lower() and osmo_str2upper(), but these lack:
* proper destination buffer bounds checking,
* ability to call directly as printf() argument.
Deprecate osmo_str2upper() and osmo_str2lower() because of missing bounds
checking.
Introduce osmo_str_tolower_buf(), osmo_str_toupper_buf() to provide
bounds-safe conversion, also able to safely convert a buffer in-place.
Introduce osmo_str_tolower(), osmo_str_toupper() that call the above _buf()
equivalents using a static buffer[128] and returning the resulting string
directly, convenient for direct printing. Possibly truncated but always safe.
Add unit tests to utils_test.c.
Replace all libosmocore uses of now deprecated osmo_str2lower().
Naming: the ctype.h API is called tolower() and toupper(), so just prepend
'osmo_str_' and don't separate 'to_lower'.
Change-Id: Ib0ee1206b9f31d7ba25c31f8008119ac55440797
Having all inculdes listed in one place is a common good
practice, which prevents one from adding duplicates.
Change-Id: I3f52189d5e8f9afafc39525e95385a085f8f850a
Allow printing the source file information *after* the log information.
Add target->print_filename_pos, log_set_print_filename_pos() and enum
log_filename_pos, and the optional 'last' keyword to the 'logging print file'
vty command. (An enum in case we want to add other positions later.)
Rationale: on log lines, the logging context is usually printed first in the
logging text. Without the source file information, this logging context pretty
much aligns in an easily readable way. When adding the source file information,
each line's logging context info is shifted right by a pretty much random
amount and it is hard to spot recurring logging contexts.
One solution is to switch off source file info, of course, but that's not an
option when actively hacking on bugs and new features.
For example, it is unnecessarily hard to spot lchan FSM related log lines in
this osmo-bsc log snippet:
DRSL NOTICE mgw_endpoint_fsm.c:603 mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Freeing instance
DRSL NOTICE fsm.c:381 mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Deallocated
DMSC NOTICE mgw_endpoint_fsm.c:603 SUBSCR_CONN(conn0){CLEARING}: Received Event FORGET_MGW_ENDPOINT
DCHAN DEBUG lchan_rtp_fsm.c:741 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED
DCHAN DEBUG lchan_rtp_fsm.c:520 lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Freeing instance
DCHAN DEBUG fsm.c:381 lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Deallocated
DCHAN DEBUG lchan_rtp_fsm.c:520 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED
DCHAN DEBUG lchan_fsm.c:1232 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: state_chg to WAIT_RF_RELEASE_ACK
DRSL NOTICE handover_fsm.c:762 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DRSL NOTICE handover_fsm.c:762 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Freeing instance
DRSL NOTICE fsm.c:381 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Deallocated
DCHAN DEBUG lchan_fsm.c:1196 lchan(0-0-1-TCH_F-0){WAIT_RF_RELEASE_ACK}: state_chg to BORKEN
DCHAN DEBUG lchan_fsm.c:354 lchan(0-0-1-TCH_F-0){BORKEN}: (type=TCH_F) Clearing lchan state
DLMGCP DEBUG mgcp_client.c:741 Tx MGCP msg to MGCP GW: 'DLCX 3 2@mgw MGCP 1.0'
DLMGCP DEBUG mgcp_client.c:743 Sending msg to MGCP GW size: 66
DRLL NOTICE mgcp_client_fsm.c:422 MGCP_CONN(to-BTS){ST_DLCX_RESP}: Received Event EV_DLCX_RESP
Placing the source file info behind the log text makes it much easier to
follow, while the source file info is still available:
DRSL NOTICE mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Freeing instance (mgw_endpoint_fsm.c:603)
DRSL NOTICE mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Deallocated (fsm.c:381)
DMSC NOTICE SUBSCR_CONN(conn0){CLEARING}: Received Event FORGET_MGW_ENDPOINT (mgw_endpoint_fsm.c:603)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED (lchan_rtp_fsm.c:741)
DCHAN DEBUG lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Freeing instance (lchan_rtp_fsm.c:520)
DCHAN DEBUG lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Deallocated (fsm.c:381)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED (lchan_rtp_fsm.c:520)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: state_chg to WAIT_RF_RELEASE_ACK (lchan_fsm.c:1232)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Terminating (cause = OSMO_FSM_TERM_REGULAR) (handover_fsm.c:745)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Freeing instance (handover_fsm.c:745)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Deallocated (fsm.c:381)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RF_RELEASE_ACK}: state_chg to BORKEN (lchan_fsm.c:1196)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){BORKEN}: (type=TCH_F) Clearing lchan state (lchan_fsm.c:354)
DLMGCP DEBUG Tx MGCP msg to MGCP GW: 'DLCX 3 12@mgw MGCP 1.0' (mgcp_client.c:741)
DLMGCP DEBUG Sending msg to MGCP GW size: 67 (mgcp_client.c:743)
DRLL NOTICE MGCP_CONN(to-BTS){ST_DLCX_RESP}: Received Event EV_DLCX_RESP (mgcp_client_fsm.c:422)
Implementation: for 'last', insert source file info only when an '\n' is found
at the end of the log line composition buffer, so that LOGP()...LOGPC()
constructs also print source file info only when a log line actually ends.
Change-Id: I393907b3c9e0cc1145e102328adad0a83ee13a9f
When IPPROTO_UDP is used then SO_REUSEADDR omitted since UDP is
connection less we do not have to wait until lingering connections time
out. There were also negative effects such as that two applicatications
could use the same UDP port, normally one of the two applications would
get an error, but with SO_REUSEADDR this is supressed. However, there
are applications (UDP MULTICAST) where two applications must be able to
use the same port. In the osmocom project those are osmo-bts-virtual,
virtphy and gsmtap in general.
Lets introduce a flag that the API user can supply in order to have
SO_REUSEADDR applied.
- Add new flag OSMO_SOCK_F_UDP_REUSEADDR
Change-Id: I94aaf6d5224ab23bde5ea5c4a83569b6145ab32b
Related: OS#3497
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: Ibc1d3746f1876ac42d6b1faf0e5f83bd2283cdcc
It's a common pattern having a list of msgb and having to maintain its
size (for instance, to limit the maximum size of the list). Having the
counter updated at the same time that the msgb is enqueued or dequeued
helps avoiding introducing new bugs by forgetting to update the size
counter at the right places.
Change-Id: I33b501e89a8f29e4aa121696bcbb13d4b83db40f
Otherwise applications need to use "extern void* tall_sigh_ctx" and set
it manually (that symbol is not exported in any header file) or end up
allocating struct signal_handler into the NULL talloc ctx.
API created in a similar way as already existing msgb_talloc_ctx_init(),
but without the pool_size because it's not considered necessary in this
case.
Change-Id: Id58ca18eb826b8f4183a7cf0dbb2b38cba702a09
To reset the state of BSSGP allow to flush the BSSGP queues.
When testing (with TTCN3) the test object should be resetted between
each test.
Introduce the functions:
bssgp_fc_flush_queue() - flushs a single flow control object
bssgp_flush_all_queues() - flushs queues of all BSSGP connections
Change-Id: I29b6ad6742ddf9b0b58b4af37d9a1cf18e019325
There was gsm0480_l3hdr_push() declared in a header file, but
not exposed in 'libosmogsm.map'. Furthermore, for some reason
it was a part of GSM 04.80 API, what is not actually correct.
Let's rename this symbol, and properly expose it as a part of
the GSM 04.08 API. Also, let's introduce an auxiliary wrapper
for messages, where the transaction identifier is required
(see GSM 04.07, section 11.2.3.1.2).
Change-Id: I8a045efe8335d83fcbe8d43eb180972e3b1d9dda
In the previous commit we deprecated ipa_ccm_idtag_parse() but
also removed ipa_ccm_idtag_parse_off(), for which I couldn't find
any users. However, legacy openbsc.git still uses this function,
so let's re-introiduce it in its original form.
Change-Id: Ibfe53b04340eb355c8bfb8453a2af1522a4b6baf
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As we're moving this to a common/shared library now, we need to use
the osmo_ namespace prefix for symbol names, struct/type names and
constants.
Change-Id: Ie36729996abd30b84d1c30a09f62ebc6a9794950
This imports the code from osmo-msc 6afef893e17bce67e4d4119acd34d480ed03ba77
with minimal changes to make it compile. Symbol renaming to osmo_
prefix is done separately in a follow-up patch to have a as-clean-as-possible
import first.
Change-Id: I9bc38102318da02d1fe46ef516df3cfd6bf8e3da
Contrary to the existing gsm0480_create_ussd_resp(), the new function
only generates the value part of the FACILITY IE, and not the IE
Tag/Length or the 04.08 L3 header. This is needed in the context of
GSUP-encapsulated USSD, as here we don't work with L3 messages, but
only pass on the FACILITY IE value.
Change-Id: Ide240279240322f643e142229eb7829f538c6314
In SIMtrace 1 the ATR was sent the same way as an APDU.
The ATR is not an APDU, and could be mis-interpreted as valid APDU.
This change allows to make the difference between actual APDU and
the ATR, but also adds sub_types for future SIMtrace 2 use cases.
Change-Id: I5bd0dff5a4a90cfe96d9c4f3dec6657e1d85bf7a
Callers require to know whether the returned ERROR cmd was received or
generated locally, in order to send it or do something with it locally.
Related: OS#3394
Change-Id: Ide9170e5c31967c353f8fe4e8227e64130b91eae
enum gsm0808_permitted_speech does not have any value strings. Lets
add value strings to make debugging easier.
Change-Id: I5b5612a5df2758b0137a34c17f7c8c2b3f07c806
The value string table gsm48_chan_mode_names[] lacks a function
to get the value string by a value. Lets add one.
Change-Id: I0757bcc278c140e18249e35864338e19cdaa3cf7
The conv_gen.py utility was tested against both Python 2 and 3,
so there is no need to enforce Python 2. Also, having:
#!/usr/local/bin/python{2|3}
is a bad idea, because Python may be installed in a different location.
Change-Id: I6007d481047b584db13d6eda70fb99f11f9ddaa1
In Change-Id I5a70eb65952cbc329bf96eacb428b07a9da32433 we redirected
all OSMO_ASSERT() via osmo_panic(). However, this caused various
applications to have build failures, as OSMO_ASSERT() now appeared
to be able to return to the call site. Let's inform the compiler
explicitly that there's no return from osmo_panic().
Change-Id: I8adf4c7b0ee6a4581cef8dd4e9f6a1dfde70ee55
A loooong time ago, we introduced osmo_panic() as a wrapper around
abort(). The advantage is, that this wrapper can be overridden, and
that it will also work in embedded (bare iron) targets, where the
abort simply translates to an infinite loop.
Change-Id: I5a70eb65952cbc329bf96eacb428b07a9da32433
Add:
gsm0808_create_handover_detect()
gsm0808_create_handover_complete()
gsm0808_create_handover_failure()
To existing structs gsm0808_old_bss_to_new_bss_info and
gsm0808_handover_required, add a final 'more_items' flag that makes future
extensions API and ABI compatible.
Fix the msgb string for Handover Request Ack.
Extend some API doc comments.
Related: OS#2283 (inter-BSC Handover, BSC side, MT)
Change-Id: I03ee7ce840ecfa0b6a33358e7385528aabd4873f
In Change-Id I1cee271fed0284a134ffed103c0d4bebbcfde2a8 we added support
for a new session state IE, but we didn't add any value_string array
for string conversion of it. Let's fix this.
Change-Id: I3d9f087786dc37c42498fa9a2be07483ec93ba7b
This function can be used to resolve the error message type for
a given message type. Can be used by generic error handlers that
work for any incoming message type.
Change-Id: Ic637bec53dd7fe3ec83da99b49b4eae34d5602b2
This function can be used when there is only a part of GSM 04.80
message available - Facility IE, e.g. when a message is carried
over GSUP/MAP. Let's expose it.
Refactoring includes the following:
- adding the 'gsm0480_' prefix;
- correcting inverted return value;
- cosmetic code style changes.
Change-Id: I623c39ffbe6cdee65eade8435a2faa04d0da193e
In some cases, there is no need to parse the whole message,
e.g. during the conversion from DTAP to GSUP/MAP. This
function can be used to extract given IE from a message.
Change-Id: I3989d061903352473305f80712f1a1560d05df3d
This function permits the user to register deprecated log categories,
which will ensure that if log categories are removed from a program,
old config files will still load.
We simply dynamically allocate a cmd_element and install it at
CFG_LOG_NODE. Not registering it at VIEW_NODE or ENABLE_NODE
ensures that it's not accessible from the interactive VTY, but only
from the config file / configure node.
Change-Id: I171f62ea2dc565b3a6c3eecd27fb7853e2529598
The general idea about each osmo_fsm_instance having a separate
log-level was to be able to selectively increase/show/enable logging
for some FSM instances (e.g. of a particular subscriber) while
maintaining normal logging verbosity for all other instances of the
same FSM.
The introduction of LOGPFSML() in Change-Id
If295fdabb3f31a0fd9490d1e0df57794c75ae547 broke that idea, as it would
use a compile-time log level, irrespective of the
osmo_fsm_inst.log_level setting of the given instance.
Let's combine the two:
Use the explicit level stated at LOGPFSML(), _unless_ this instance
has a higher log_level configured.
This way, all FSMs should normally be created with
osmo_fsm_inst.log_level == LOGL_DEBUG. At that point LOGPFSM()
statements would be rendered at debug level, typically below the
threshold of most logging configurations.
Code that has explicit higher log levels like LOGPFSML(fi, LOGL_ERROR)
would always be printed, as it is an error message.
And if we now increase the osmo_fsm_inst.log_level, then even the normal
LOGPFSM() statements would suddenly be logged at that higher level,
selectively increasing log verbosity - like originally intended.
Change-Id: I1820f04d0c6f5d5ff08eb95b8c0e88764534491a
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
The idea is to be able to add a gsm0808_cell_id to a gsm0808_cell_id_list2:
first convert it to a list, then re-use gsm0808_cell_id_list_add(). It will be
used by osmo-bsc to manage neighbor-BSS cell identifiers from VTY.
Change-Id: Ibf746ac60b1b1e920baf494b396658a5ceabd788
This new function can be used to print a rate counter group according
to a format string. The intention is to generalize and replace manual
printing of counters as implemented for the 'show statistics' VTY
command of osmo-bsc.
Related: OS#3245
Related: osmo-bsc commit 71d524c059c5a5c90e7cb77d8a2134c1c68b9cde (g#9217)
Change-Id: Idb3ec12494ff6a3a05efcc8818e78d1baa6546bd
For some strange reason, the osmo_mncc_name() inline function
was not in the mncc.h header, but in the mncc.c file. Let's fix that.
Change-Id: I2c3666510c981dffa4ba25bed517fd7ebd1250f5
* prefix all symbols/constants with osmo_
* use stdint.h types instead of kernel types
* use Doxygen API documentation
* use Osmocom CRC16-CCITT functions
* use Osmocom bit-reversal functions
* integrate with Automake
Change-Id: I109085ab3e412c20b19cd42fb7137aa0e4167542
I've been importing from 94d7dbf108813ea45a91e27e9a8bd231d5a23fa7
but the isdnhdlc code hasn't seen any changes since 2012 anyway.
Change-Id: I3c58f9cb6921c2fdd0f2fcb11f622a0be88c7c63
Linux offers file descriptor based periodic (interval) timers,
which can achieve a higher precision than our userspace based
timers and which can be slave'd to CLOCK_MONOTINIC or other clock
sources. Let's add some code for osmo_fd wrapped versions that
integrate well with our select() abstraction.
The code has been used in osmo-bts-trx since June 2017 (change-id
I51b19adde14ebb7ef3bb863d45e06243c323e22e), and I'm just renaming
and moving it to libosmocore here. After a merge, the osmo-bts
implementations can be removed in favor if this one.
Change-Id: Ibeffba7c997252c003723bcd5d14122c4ded2fe7
Add:
- gsm0808_current_channel_type_1()
- gsm0808_permitted_speech()
- gsm0808_chosen_channel()
- gsm0808_channel_type_name()
gsm0808_permitted_speech() is moved from osmo-bsc's bssap_speech_from_lchan();
gsm0808_chosen_channel() is moved from osmo-bsc's lchan_to_chosen_channel();
Rationale: will be re-used by inter-BSC handover, makes sense to keep with the
other gsm0808 utils.
Related: OS#2283 (inter-BSC handover, BSC side)
Change-Id: I8a3cc5d4548e9a78d945d54c69ccced251edcec9
According to TS 24.008 10.5.4.7 the called party BSC number IE
has a maximum length of 43 octets.
This length is assumed inside osmo-hlr with a magic number:
uint8_t msisdn_enc[43]; /* TODO use constant; TS 24.008 10.5.4.7 */
This change makes libosmocore provide a constant which osmo-hlr can use.
Change-Id: Ia0bf6ceadcac38a8c75d166402b54058e5c6c6d4
Imagine following scenario:
1- client connects to CTRL iface, a new conn is created with POLL_READ
enabled.
2- A non-related event happens which triggers a TRAP to be sent. As a
result, the wqueue for the conn has now enabled POLL_WRITE, and message
will be sent next time we go through osmo_main_select().
3- At the same time, we receive the GET cmd from the CTRL client, which
means POLL_READ event will be also triggered next time we call
osmo_main_select().
4- osmo_main_select triggers osmo_wqueue_bfd_cb with both READ/WRITE
flags set.
5- The read_cb of wqueue is executed first. The handler closes the CTRL
conn for some reason, freeing the osmo_fd struct and returns.
6- osmo_qeueue_bfd_cb keeps using the already freed osmo_fd and calls
write_cb.
So in step 6 we get a heap-use-after-free catched by AddressSanitizer:
[0;m20180424135406115 [1;32mDLCTRL[0;m <0018> control_if.c:506 accept()ed new CTRL connection from (r=10.42.42.1:53910<->l=10.42.42.7:4249)
[0;m20180424135406116 [1;34mDLCTRL[0;m <0018> control_cmd.c:378 Command: GET bts.0.oml-connection-state
[0;m20180424135406117 [1;34mDLINP[0;m <0013> bts_ipaccess_nanobts.c:417 Identified BTS 1/0/0
[0;m[1;36m20180424135406118 [1;34mDNM[0;m[1;36m <0005> abis_nm.c:1628 Get Attr (bts=0)
[0;m[1;36m20180424135406118 [1;34mDNM[0;m[1;36m <0005> abis_nm.c:1628 Get Attr (bts=0)
[0;m20180424135406118 [1;34mDCTRL[0;m <000e> osmo_bsc_ctrl.c:158 BTS connection (re)established, sending TRAP.
[0;m20180424135406119 [1;32mDLCTRL[0;m <0018> control_if.c:173 close()d CTRL connection (r=10.42.42.1:53910<->l=10.42.42.7:4249)
[0;m=================================================================
==12301==ERROR: AddressSanitizer: heap-use-after-free on address 0x611000003e04 at pc 0x7f23091c3a2f bp 0x7ffc0cb73ff0 sp 0x7ffc0cb73fe8
READ of size 4 at 0x611000003e04 thread T0
#0 0x7f23091c3a2e in osmo_wqueue_bfd_cb /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/libosmocore/src/write_queue.c:65
#1 0x7f23091ad5d8 in osmo_fd_disp_fds /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/libosmocore/src/select.c:216
#2 0x7f23091ad5d8 in osmo_select_main /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/libosmocore/src/select.c:256
#3 0x56538bdb7a26 in main /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bsc/osmo-bsc/src/osmo-bsc/osmo_bsc_main.c:532
#4 0x7f23077532e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0)
#5 0x56538bdb8999 in _start (/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-896/inst/osmo-bsc/bin/osmo-bsc+0x259999)
Fixes: OS#3206
Change-Id: I84d10caaadcfa6bd46ba8756ca89aa0badcfd2e3
Ericsson supports a RSL command to page and immediate assign
as single command. For paging a MS the BTS must know the
paging group.
Change-Id: I9194500e307ad69f8da07510bc965a7a5cd82a2a
We are alredy doing the same way for ip.access and siemens ones, and
this way we avoid using the hardcoded value in osmo-bsc.
Change-Id: I7cb65f3ff1cfdbe4eee97b7545bcd13a38c72e25
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
Rationale: so far we use code like
if (TLVP_PRESENT(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS)) {
val = TLVP_VAL(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS);
len = TLVP_LEN(&tp, VERY_L0NG_ENUM_VALUE_NAME_TH4T_NEVER_EMDS);
}
This is a) very long and b) prone to picking the wrong name one of the three
times, which would use the wrong length or val without necessarily being
noticed. A safer and shorter, more readable pattern is:
struct tlv_p_entry *e = TVLP_GET(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS);
if (!e)
return -ENOENT;
hexdump(e->val, e->len);
Change-Id: I445de17fc2daa3ab051f5708dd0cc185b23dc048
According to the GSM TS 04.07, section 11.2.3.1.1 "Protocol
discriminator", bits 1 to 4 of the first octet of a standard
L3 message contain the protocol discriminator IE.
Meanwhile, the GSM48_PDISC_USSD represents value 0x11, i.e.
0b10001, that requires 5 bits, and moreover it is not
documented anywhere. Let's drop it.
Change-Id: Ic4eb8a6db4ff1dfd535bd0c84e7acf1908422f64
Clarify semantics and micro-optimise for the case of single Cell Identifer IEs.
Test in gsm0808_test.c
So far we have gsm0808_enc_cell_id_list2(), but there also exist instances of
single Cell Identifiers (3GPP TS 48.008 3.2.2.17).
It is possible to decode the same using the cell identifier list API, but this
forces the caller to also keep a full struct gsm0808_cell_id_list2 with all its
127 entries around.
E.g. for handover, there are two Cell Identifiers (Serving and Target); I'd
need two full cell id lists for each, and these would be dynamically allocated
for each handover operation, whether it uses them or not.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I9f9c528965775698ab62ac386af0516192c4b0cc
Allow passing multiple struct tlv_parsed in an array, to allow parsing as many
repeated IEs as are expected by the caller.
From tlv_parse(), call tlv_parse2() with dec_multiple = 1 to yield the previous
behavior. tlv_parse() remains valid API.
An example of multiple IEs is the BSSMAP Handover Request, containing Cell
Identifier (Serving) and Cell Identifier (Target), both defined by 3GPP TS
48.008 3.2.2.17 with identical IE tags; both are mandatory.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: Id04008eaf0a1cafdbdc11b7efc556e3035b1c84d
This will be used by the upcoming neighbor_ident API in osmo-bsc, where the vty
interface allows composing neihbor BSS cell identifier lists, and we want to
allow adding individual items from individual user commands.
It will also be useful to accumulate cell identifiers in case a subscriber sees
multiple alternative cells from a neighboring BSS, and we want to pass these on
to the MSC in a Handover Required.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I5781f5fa5339c92ab2e2620489b002829d206925
This will be used by cell idenitifier list code, like upcoming neighbor_ident
VTY in osmo-bsc and regression tests.
Change-Id: Iebc5cdf61b697b1603900993fc265af3eca0cedf
Neels Hofmeyr
Harald Welte
Pau Espin
Philipp Maier
Oliver Smith
Eric Wild
Kevin Redon
Daniel Willmann
Sylvain Munaut
Martin Hauke
Shinjo Park
Neels Hofmeyr
Keith Whyte
