Adjust to merge of gb-variants.adoc into gb-ns2.adoc in
osmo-gsm-manuals I902b850528cbc04bd469590babd84cccf64300e8.
Change-Id: I17b182db6068ca583078c66c9576029a28016fd4
Mostly just change the chapter so it makes sense for gbproxy. Some todos
are still left
Change-Id: I905835c2be7be43fe376fbc9d743107948c7e6d4
Related: SYS#5115, SYS#5005
* Remove mention of features that are no longer supported
* Update the data model
Related: SYS#5115, SYS#5005
Change-Id: Icb9095f4002f2a0a4562fccecae109075cb93c7b
When there are multiple SGSNs inside a pool, we need to decide
how much of the per-BVC capacity advertised by the BSS in its
BVC-FLOW-CONTROL we should announce to each of the pool members.
A conservative approach would be to advertise 1/num_sgsn, but
there may also be use case where over-provisioning (announcing more
than an equal share of the capacity) is useful.
Hence, let's introduce "pool bvc-flow-control-ratio <1-100>" in order
to allow the administrator to decide.
Related: OS#4891
Change-Id: Ibe5addf657e7237499ca0205bacfe999ecd1e771
Add 'cs7' default configuration, link to the
osmo-gsm-manuals/common/cs7-config.adoc chapter to fully explain the 'cs7'
client configuration.
Related: OS#2767
Depends: Ia2508d4c7b0fef9cdc57e7e122799a480e340bf7 (osmo-gsm-manuals)
Change-Id: If0f7c8fc4b94eb40b62570cf90999d5074dc00ee
Do not only update the VTY reference and counters of osmo-sgsn, but also
the VTY reference of gbproxy.
This was not possible with the old code path of calling "regen_doc.sh"
inside docker-playground.git, as it expects the program to be updated to
have the same name as the docker image. Using the docker-playground
script also has the disadvantage, that one must push the development
branch to git.osmocom.org before updating the VTY reference/counters,
because that script would build a new docker container with a freshly
cloned repository, check out the same commit that we have already
locally, build that and then finally regenerate the docs.
So instead of adding another parameter for the docker image to the
script in docker-playground.git and calling it twice, simplify the
process by rewriting the regen_doc.sh script in osmo-sgsn.git. Make it
start the locally installed osmo-sgsn and osmo-gbproxy binaries and
call osmo_interact_vty.py on them.
Related: OS#4292
Change-Id: I8b5bd5347ea34266ad650383372630f2a84d5cce
This adds a very basic manual consisting of nothing more than
the common chapters and a high-level description of what it is
all about.
Change-Id: I80d4ea016376c59995ccfcd8685c7c0e86745bd2
Fix some typos, correct data compression command, add example to turn
off compression.
Change-Id: I6beff8c66eacf12f1081d51dd6b124bdd4478558
Related: OS#1720
Quite a few features that are listed as not-implemented in the overview
section are actually implemented now.
Change-Id: I8d499a25293b69babc2aebb2d697438f8ba8141f
Related: OS#1720
Previous commit introduced command "authentication (optional|required)",
which is only meaningful if auth-policy is remote. Upon adding the cmd,
it changed the default logic for remote policy to not require
authentication, which broke TTCN3 tests because sgsn no longer tries to
authenticate the users.
Since it's actually good to enable authentication by default where
possible, let's enable it by default when on auth-policy remote.
In order to do so, let's simply not care about the value of variable
require_authentication if auth_policy is not REMOTE. As a result, we
drop parts of the previous patch and remove unneeded checks (which are
only partially useful based on order of commands during VTY read).
Fixes: 794f446a284ed1ac6d31eb79a8f4c874d66fc34e
Change-Id: Ic707a95af178b44f08809df3d3bc8354bf34273c
It may be useful to have 'remote' authorization policy, but do not
require authentication in GERAN at the same time, e.g. in combination
with 'subscriber-create-on-demand' feature of OsmoHLR.
This change introduces a new VTY parameter similar to the one
that we already have in OsmoMSC:
authentication (optional|required)
Please note that 'required' only applies if 'auth-policy' is 'remote'.
Change-Id: I9909145e7e0af587c28827e16301a61b13eedaa9
Moved to doc/manuals/, with full commit history, in preceding merge commit.
Now incorporate in the build system.
Build with:
$ autoreconf -fi
$ ./configure --enable-manuals
$ make
Shared files from osmo-gsm-manuals.git are found automatically if
- the repository is checked out in ../osmo-gsm-manuals; or
- if it osmo-gsm-manuals was installed with "make install"; or
- OSMO_GSM_MANUALS_DIR is set.
Related: OS#3385
Change-Id: I0477d7c871413bd90b365d3064bac3cba23a0883
This is the first update since the libosmocore changes to the 'show
online-help' generated output. Hence the produced document now benefits from
the structural improvements:
- not repeating common commands for every node;
- using section names that match the VTY prompt.
Drop most of the sgsn_vty_additions.xml -- they merely repeat what the online
VTY doc already explains. Many of these more verbose explanations have been
absorbed into the VTY online doc in osmo-sgsn.git change-id
I35984014424412e91437b7ed71576aef3819cb1e.
Adjust remaining sgsn_vty_additions.xml to match the new node ID scheme.
Change-Id: I71863e5056ad369d2055e9882a52a00fa999ab04
Since the NITB split, GSUP is used in all three network elements, so
make the protocol a shared chapter
Change-Id: Id2d7c27ef16eb0ebe5f60d625a1fcf42f1603f4f
The initial goal was to make sure we don't have overall FORCE rules causing
unnecessary rebuilds -- annoying while writing documentation. As I looked
through possible dependencies, I finally understood what's going on here.
Remove code dup and nicely sort which belongs where in build/Makefile.*.inc. In
each, describe in a top comment how to use it, and also unify how they are
used:
- Rename Makefile.inc to Makefile.docbook.inc and refactor
- Add Makefile.vty-reference.inc
- Add Makefile.common.inc
Make sure that we accurately pick up all dependencies.
Drop use of the macro called 'command', that silenced the actual command lines
invoked and replaced them with short strings: it obscures what is actually
going on and makes the Makefiles hard to read and understand.
Each manual's makefile is greatly reduced to few definitions and a Makefile
include, e.g. one for asciidoc, one for VTY reference.
Move common/bsc_vty_additions.xml to OsmoBSC/vty/libbsc_vty_additions.xml, link
from OsmoNITB. It applies only to OsmoBSC and OsmoNITB.
Add a script that combines a VTY reference file with *all* additions files
found in a manual's vty/ dir. Call this from Makefile.vty-reference.inc.
Change-Id: I9758e04162a480e28c7dc83475b514cf7fd25ec0
All parts referencing GFDL can be easily disabled by removing the
'gfdl-enabled' attribute from the document.
Change-Id: I2489726ad2e90301bceadfada926e31ae0f85986
Reserve a new IE for the charging characteristics. We need to handle
them as a GGSN might otherwise reject the PDP context creation. For
the SGSN it is enough to send the two octets as it.
Pick the 0x1X range for the IEs as it is used with the PDP contexts.
Change-Id: I1d7423582e154728a240cf15c32772a06822f4ad
The arrow style used to desribe the flowcharts in gsup.adoc does not match
the arrow style used in the protocol descriptions which are included from
the common directory (gb.adoc, control_if.adoc, oap.adoc). This patch changes
the arrow style to match the already existing common parts.
Change-Id: I7faa0c97ee3705a64289a47bc63f311d05f988b3
The explaination of the access policy is a bit unclear. Users
that come from osmo-nitb might have trouble to grasp the functionality
of the access control list based approack correctly.
Change-Id: Iaae3035c4de3cb082f097441eff99289ee6dfc53
Add semicoli in fig-gprs-pcubts digraph.
Remove section from GMM Implementation about non-existence of HLR.
The SGSN can access osmo-hlr via GSUP (and will have to do so in the
libvlr future).
Change-Id: I0164f418e453672321eed00bbc454c1e223ea158