uboot-mt623x/include
Peter Tyser 983eb9d162 pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW
This change does the following:
- Removes the printing of the PCI interrupt line value.  This is
  normally set to 0 by U-Boot on bootup and is rarely used during
  everyday operation.

- Prints out the PCI function number of a device.  Previously a device
  with multiple functions would be printed identically 2 times, which is
  generally confusing.  For example, on an Intel 2 port gigabit Ethernet
  card the following was displayed:
    ...
    04  01  8086  1010  0200  00
    04  01  8086  1010  0200  00
    ...

- Prints a text description of each device's PCI class instead of the
  raw PCI class code.  The textual description makes it much easier to
  determine what devices are installed on a PCI bus.

- Changes the general formatting of the PCI device output.

Previous output:
  PCIE1: connected as Root Complex
          04  01  8086  1010  0200  00
          04  01  8086  1010  0200  00
          03  00  10b5  8112  0604  00
          02  01  10b5  8518  0604  00
          02  02  10b5  8518  0604  00
          08  00  1957  0040  0b20  00
          07  00  10b5  8518  0604  00
          09  00  10b5  8112  0604  00
          07  01  10b5  8518  0604  00
          07  02  10b5  8518  0604  00
          06  00  10b5  8518  0604  00
          02  03  10b5  8518  0604  00
          01  00  10b5  8518  0604  00
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d  00  1957  0040  0b20  00
  PCIE2: Bus 0c - 0d

Updated output:
  PCIE1: connected as Root Complex
          04:01.0 - 8086:1010 - Network controller
          04:01.1 - 8086:1010 - Network controller
          03:00.0 - 10b5:8112 - Bridge device
          02:01.0 - 10b5:8518 - Bridge device
          02:02.0 - 10b5:8518 - Bridge device
          08:00.0 - 1957:0040 - Processor
          07:00.0 - 10b5:8518 - Bridge device
          09:00.0 - 10b5:8112 - Bridge device
          07:01.0 - 10b5:8518 - Bridge device
          07:02.0 - 10b5:8518 - Bridge device
          06:00.0 - 10b5:8518 - Bridge device
          02:03.0 - 10b5:8518 - Bridge device
          01:00.0 - 10b5:8518 - Bridge device
  PCIE1: Bus 00 - 0b
  PCIE2: connected as Root Complex
          0d:00.0 - 1957:0040 - Processor
  PCIE2: Bus 0c - 0d

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-11-14 23:46:46 +01:00
..
asm-generic x86: Fix support for booting bzImage 2010-05-06 00:17:01 +02:00
bedbug Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
configs powerpc/p4080ds: Move ICS refclk define into P4080DS.h 2010-11-12 09:45:15 -06:00
cramfs Fix endianess problem in cramfs code (cramfs is always host-endian in Linux) 2008-03-03 22:08:08 +01:00
galileo rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
jffs2 fdt_support: add partitions fixup in mtd node 2010-03-21 22:44:59 +01:00
linux Coding Style cleanup 2010-10-27 22:48:30 +02:00
lzma Rename lib_generic/ to lib/ 2010-04-13 09:13:04 +02:00
mtd cfi_flash: Simplify dynamic flash bank number detection 2010-09-20 15:08:51 +02:00
pcmcia
u-boot Rename lib_generic/ to lib/ 2010-04-13 09:13:04 +02:00
usb Fix building for 83xx boards with USB support 2010-10-21 20:00:41 +02:00
.gitignore update include/asm/ gitignore after move 2010-05-07 00:17:30 +02:00
74xx_7xx.h powerpc: Move duplicated BAT defines to mmu.h 2009-02-10 00:27:40 +01:00
ACEX1K.h fpga: Remove relocation fixups 2009-10-03 10:17:56 +02:00
MCD_dma.h
MCD_progCheck.h
MCD_tasksInit.h
SA-1100.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
_exports.h Remove support for CONFIG_HAS_UID and "forceenv" command 2010-09-19 19:29:47 +02:00
addr_map.h Introduce addr_map library 2008-12-15 22:05:36 +01:00
ahci.h Update Freescale copyrights to remove "All Rights Reserved" 2009-07-29 09:59:22 +02:00
ali512x.h Move ali512x.h 2009-03-20 22:39:13 +01:00
altera.h fpga: Remove relocation fixups 2009-10-03 10:17:56 +02:00
amba_clcd.h video: add amba-clcd prime-cell 2010-01-27 21:23:14 +01:00
ambapp.h Coding Style cleanup; update CHANGELOG 2008-04-13 09:59:26 -07:00
api_public.h API: Improve glue mid-layer of the API demo application. 2009-02-18 00:39:44 +01:00
arm925t.h
armcoremodule.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
asm-offsets.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
at45.h at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT 2009-04-04 20:42:19 +02:00
at91rm9200_i2c.h
at91rm9200_net.h
ata.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
atmel_lcdc.h Add ATMEL LCD driver 2008-05-10 11:44:55 +02:00
bcd.h Replace BCD2BIN and BIN2BCD macros with inline functions 2009-08-25 12:57:55 +02:00
bcm5221.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
bmp_layout.h
bus_vcxk.h new video driver for bus vcxk framebuffers 2009-07-26 13:17:21 +02:00
bzlib.h
circbuf.h
clps7111.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
command.h Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC 2010-10-29 21:32:07 +02:00
common.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
commproc.h CCM: remove code for yet another corpse 2010-10-06 22:22:26 +02:00
compiler.h include/compiler.h: remove uint typedef for __MACH__ 2010-10-06 23:09:42 +02:00
config_cmd_all.h rarp: Condtionally compile rarp support 2010-10-11 23:00:29 -07:00
config_cmd_default.h Add 'editenv' command 2009-10-27 20:58:25 +01:00
config_defaults.h Add support for operating system OSE 2010-09-28 14:42:26 +02:00
crc.h
da9030.h
dataflash.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ddr_spd.h powerpc/8xxx: Enable DDR3 RDIMM support 2010-07-26 13:16:10 -05:00
div64.h Add a do_div() wrapper macro, lldiv(). 2009-01-24 00:23:09 +01:00
dm9000.h Add config option for disabling DM9000-SROM support. 2009-06-08 22:57:21 -07:00
dm9161.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
dp83848.h
ds1722.h Misc ds1722 fixups 2009-09-04 21:54:52 +02:00
ds4510.h Add support for Maxim's DS4510 I2C device 2009-01-24 01:47:50 +01:00
dtt.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
e500.h ppc/p4080: Determine various chip frequencies on CoreNet platforms 2009-09-24 12:05:29 -05:00
elf.h compiler.h: unify system ifdef cruft here 2009-07-19 21:41:46 +02:00
environment.h New implementation for internal handling of environment variables. 2010-09-19 19:29:48 +02:00
errno.h Add basic errno support. 2010-09-19 19:29:47 +02:00
exports.h Remove support for CONFIG_HAS_UID and "forceenv" command 2010-09-19 19:29:47 +02:00
ext2fs.h
fat.h VFAT: fix processing of scattered long file name entries 2010-10-12 22:39:14 +02:00
fdc.h
fdt.h powerpc: Fix bootm to boot up again with a Ramdisk 2008-09-13 02:03:38 +02:00
fdt_support.h FDT: Add fixup support for multiple banks of memory 2010-10-18 22:50:53 +02:00
fis.h ata: add the fis struct for SATA 2008-03-26 23:38:54 +01:00
flash.h cfi_flash: Simplify dynamic flash bank number detection 2010-09-20 15:08:51 +02:00
fpga.h FPGA: add support for downloading Lattice bitstream 2010-10-13 18:09:31 +02:00
fsl_diu_fb.h fsl_diu_fb: further refactoring of FSL DIU code 2010-09-25 13:10:03 +02:00
fsl_esdhc.h ppc/85xx: PIO Support for FSL eSDHC Controller Driver 2010-04-23 21:02:30 -05:00
fsl_nfc.h Add MX25 support to nand_spl fsl nfc driver 2010-01-27 14:22:41 -06:00
fsl_pmic.h MX: Added Freescale Power Management Driver 2010-05-05 09:48:41 +02:00
hush.h hush: add showvar command for hush shell. 2008-10-18 21:54:02 +02:00
hwconfig.h Add simple hwconfig infrastructure 2009-07-16 22:23:53 +02:00
i2c.h fsl_i2c: Added a callpoint for i2c_board_late_init 2010-04-19 07:46:35 +02:00
i8042.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
ide.h mucmc52, uc101: delete ata@3a00 node, if no CF card is detected 2009-09-25 01:22:13 +02:00
image.h boot: change some arch ifdefs to feature ifdefs 2010-10-18 22:53:32 +02:00
iomux.h stdio/device: rework function naming convention 2009-07-18 00:27:46 +02:00
ioports.h
keyboard.h
kgdb.h Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
ks8721.h Add support for Eukrea CPUAT91 SBC 2009-10-13 06:17:35 -05:00
lattice.h Coding Style cleanup 2010-10-27 22:48:30 +02:00
lcd.h atmel_lcd: Allow contrast polarity to be either positive or negative 2010-09-25 15:22:51 +02:00
lcdvideo.h
led-display.h led_display: remove unused DISPLAY_MARK define 2010-10-21 22:25:04 +02:00
lh7a40x.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
lh7a400.h
lh7a404.h
libata.h ata: update the libata.h from ata.h of linux kernel 2008-04-13 23:20:16 -07:00
libfdt.h libfdt: Fix C++ compile-time cast error on gnu 4.2.1 2009-04-01 19:30:27 -04:00
libfdt_env.h compiler.h: unify system ifdef cruft here 2009-07-19 21:41:46 +02:00
linux_logo.h
lmb.h lmb: only force on arches that use it 2010-01-21 22:26:00 +01:00
logbuff.h Avoid initrd and logbuffer area overlaps 2008-06-03 19:34:19 +02:00
lpd7a400_cpld.h
lxt971a.h Remove duplicate definitions in include/lxt971a.h. 2008-07-06 23:44:34 -07:00
lynxkdi.h
malloc.h Consolidate arch-specific mem_malloc_init() implementations 2009-09-04 21:47:07 +02:00
mb862xx.h video: mb862xx: improve board-specific Lime configuration 2009-10-31 12:13:28 +01:00
mc13892.h mx51evk: Fix 2 hours reset issue 2010-10-28 11:42:34 +02:00
mg_disk.h mflash: Initial mflash support 2009-04-03 23:47:06 +02:00
mii_phy.h
miiphy.h miiphy: constify device name 2010-08-09 11:52:29 -07:00
mk48t59.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mmc.h AT91: MCI: add SD/MMC driver using mmc framework 2010-09-03 11:19:01 +02:00
mpc5xx.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc5xxx.h A4M072: Added support for the board. 2010-10-12 22:44:33 +02:00
mpc5xxx_sdma.h Move MPC5xxx_FEC driver to drivers/net 2008-08-29 13:58:07 -06:00
mpc8xx.h
mpc8xx_irq.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc83xx.h 83xx: Remove warmboot parameter from PCI init functions 2010-09-23 21:14:42 +02:00
mpc85xx.h 83xx/85xx/86xx: LBC register cleanup 2010-07-16 10:55:09 -05:00
mpc86xx.h mpc86xx: set the DDR BATs after calculating true DDR size 2010-03-30 10:50:22 -05:00
mpc106.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc824x.h powerpc: Move duplicated BAT defines to mmu.h 2009-02-10 00:27:40 +01:00
mpc8220.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
mpc8260.h
mpc8260_irq.h
mtd_node.h fdt_support: add partitions fixup in mtd node 2010-03-21 22:44:59 +01:00
mxc_gpio.h Use common function to set GPIOs for MX3 and MX5 2010-09-29 11:24:30 +02:00
nand.h nand erase: .spread, .part, .chip subcommands 2010-10-11 15:10:17 -05:00
net.h Integrate USB gadget layer and USB CDC driver layer 2010-09-20 21:57:16 +02:00
netdev.h net: Move Emaclite to NET_MULTI 2010-10-11 23:07:04 -07:00
nios2-epcs.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
nios2-io.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
nios2-yanu.h nios2: Added support to YANU UART 2010-03-21 22:44:42 +01:00
nios2.h
nomadik.h include/nomadik.h: add physical address for cldc 2010-01-27 21:23:23 +01:00
ns7520_eth.h Remove duplicate definitions in include/lxt971a.h. 2008-07-06 23:44:34 -07:00
ns9750_bbus.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns9750_eth.h Remove duplicate definitions in include/lxt971a.h. 2008-07-06 23:44:34 -07:00
ns9750_mem.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns9750_ser.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns9750_sys.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns16550.h Move arch/ppc to arch/powerpc 2010-04-21 23:42:38 +02:00
ns87308.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
onenand_uboot.h Flex-OneNAND driver support 2009-11-13 16:56:18 -06:00
part.h mflash: Initial mflash support 2009-04-03 23:47:06 +02:00
pc_keyb.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
pca953x.h Add support for PCA953x I2C gpio devices 2008-12-19 18:11:49 -06:00
pca9564.h Prepare v2010.03-rc1 2010-03-12 23:06:04 +01:00
pci.h pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW 2010-11-14 23:46:46 +01:00
pci_ids.h video: sm501: add support for SM501 chips on PCI bus 2010-06-14 12:29:26 +02:00
pcmcia.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
post.h Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC 2010-10-29 21:32:07 +02:00
ppc_asm.tmpl powerpc: fix wrong comment at GOT definitions 2010-06-29 23:03:40 +02:00
ppc_defs.h
ps2mult.h Rename common ns16550 constants with UART_ prefix to prevent conflicts 2009-04-03 22:34:07 +02:00
radeon.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
reiserfs.h
rtc.h Switch from per-driver to common definition of bin2bcd and bcd2bin 2009-08-25 12:57:55 +02:00
s6e63d6.h A driver for the S6E63D6 SPI display controller from Samsung 2009-02-24 10:00:28 +01:00
s_record.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
sata.h SATA: do not auto-initialize during boot 2009-01-27 23:42:39 +01:00
scsi.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
search.h Add hash table support as base for new environment code 2010-09-19 19:29:47 +02:00
sed156x.h
sed13806.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
serial.h Merge branch 'master' of git://git.denx.de/u-boot-samsung 2010-09-08 00:03:22 +02:00
sha1.h Add support for calculating hashes with watchdog triggering 2008-04-25 00:01:06 +02:00
sha256.h include/sha256.h: fix file permissions. 2008-07-06 01:21:46 +02:00
sja1000.h Add minimal SJA1000 header for basic CAN mode 2009-11-17 13:19:58 +01:00
sm501.h
smiLynxEM.h
spartan2.h fpga: Remove relocation fixups 2009-10-03 10:17:56 +02:00
spartan3.h add block write function to spartan3 slave serial load 2010-03-24 11:08:43 -05:00
spd.h
spd_sdram.h
spi.h Move conditional compilation of MPC8XXX SPI driver to Makefile 2008-07-01 21:02:11 +02:00
spi_flash.h spi_flash.h: pull in linux/types.h for u## types 2009-11-24 23:40:39 +01:00
status_led.h CCM: remove code for yet another corpse 2010-10-06 22:22:26 +02:00
stdio_dev.h console: unify printing current devices 2009-07-19 01:02:46 +02:00
stratixII.h fpga: Remove relocation fixups 2009-10-03 10:17:56 +02:00
sym53c8xx.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
systemace.h
timestamp.h Update U-Boot's build timestamp on every compile 2008-12-06 23:36:43 +01:00
tsec.h tsec: Add TSEC_FIBER flag 2010-01-31 22:34:34 -08:00
tsi108.h
tsi148.h Add support for the Tundra TSI148 VME-bridge 2009-07-19 11:21:08 +02:00
twl4030.h ARMV7: OMAP: add convenience function to set TWL4030 regulator voltages 2010-09-08 14:50:23 -04:00
twl6030.h ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systems 2010-08-05 10:11:30 -04:00
tws.h drivers/twserial: Add protocol driver for "three wire serial" interface. 2009-03-30 09:38:36 +02:00
ubi_uboot.h UBI: Fix problem in UBI/Linux "compatibility layer" 2010-05-19 10:57:24 +02:00
universe.h
usb.h musb: MSC host support for AM35x 2010-08-12 16:40:00 +02:00
usb_cdc_acm.h
usb_defs.h Prepare USB layer for ehci 2009-01-28 19:57:27 +01:00
usbdescriptors.h USB add macros for debugging usb device setup. 2009-12-20 12:47:37 +01:00
usbdevice.h USB add macros for debugging usb device setup. 2009-12-20 12:47:37 +01:00
version.h Makefile: fix "error: version_autogenerated.h: No such file or directory" 2008-05-13 23:15:52 +02:00
vfd_logo.h
video.h
video_ad7176.h
video_ad7177.h
video_ad7179.h
video_easylogo.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
video_fb.h video: cleanup comments in cfb_console.c and video_fb.h 2010-07-17 00:05:14 +02:00
video_font.h
video_logo.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
virtex2.h fpga: Remove relocation fixups 2009-10-03 10:17:56 +02:00
vsc7385.h Cleanup coding style, update CHANGELOG 2008-03-26 11:48:46 +01:00
vxworks.h Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
w83c553f.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
watchdog.h nios: remove nios-32 arch 2010-05-28 10:56:04 -04:00
xilinx.h add block write function to spartan3 slave serial load 2010-03-24 11:08:43 -05:00
xyzModem.h