977b50f868
Minor cleanup.
2006-05-10 17:43:20 +02:00
512f8d5d78
Add support for AMCC 440EP Rev C and 440GR Rev B
...
Patch by John Otken, 08 May 2006
2006-05-10 14:10:41 +02:00
6080a0eb63
Update omap5912osk board support
...
- Fix OMAP support that omap5912osk compiles in current source tree
- Update with code from "http://omap.spectrumdigital.com/osk5912 "
to fix problems with DDR initialization
- Fix timer setup
- Use CFI flash driver and support complete 32MB of onboard flash
- Add "print_cpuinfo()" and "checkboard()" functions to display
CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006
2006-05-10 10:55:16 +02:00
4af099bda9
Fix watchdog issues for ColdFire boards.
2006-05-09 13:49:12 +02:00
1cfefe8cb6
Merge with /home/m8/git/u-boot
2006-05-09 13:46:55 +02:00
6f5155a95c
Make R5200 specific low level initialization board conditional.
2006-05-09 11:51:51 +02:00
b75ef85f42
Update CPU target identification strings for Coldfire family.
2006-05-09 11:45:31 +02:00
0c056f0e27
Fix serial console support for MCF5271.
2006-05-09 11:37:13 +02:00
7a635e004e
Add support for Freescale M5271: Merge with /work/u-boot.mcf5271
2006-04-27 19:12:19 +02:00
8fe9bf61ef
Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
...
- Removed MPC8349ADS port
- Added PCI support to MPC8349ADS
- reworked memory map to allow mapping of all regions with BATs
Patch by Kumar Gala 20 Apr 2006
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-20 13:45:32 -05:00
8419c01304
MPC5200: enable snooping of DMA transactions on XLB even if no PCI
...
is configured; othrwise DMA accesses aren't cache coherent which
causes for example USB to fail.
2006-04-18 11:05:03 +02:00
cf48eb9abd
Some code cleanup
2006-04-16 10:51:58 +02:00
9bc97a3d91
Fix Lite500B support: Merge with /home/raj/git/u-boot.l5200b_pci
2006-04-06 10:42:23 +02:00
197b049b8b
Merge with /home/sr/git/u-boot/4xx-sdram
2006-04-05 23:55:15 +02:00
db28ddb4da
Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
...
Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
2006-04-03 15:46:10 +02:00
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31 18:32:53 +02:00
62534beb2f
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
...
405 SDRAM: - The SDRAM parameters can now be defined in the board
config file and the 405 SDRAM controller values will
be calculated upon bootup (see PPChameleonEVB).
When those settings are not defined in the board
config file, the register setup will be as it is now,
so this implementation should not break any current
design using this code.
Thanks to Andrea Marson from DAVE for this patch.
440 DDR: - Added function sdram_tr1_set to auto calculate the
TR1 value for the DDR.
- Added ECC support (see p3p440).
Patch by Stefan Roese, 17 Mar 2006
2006-03-31 14:32:07 +02:00
b66a938342
Set SDelay register in the DDR controller for the MPC5200B chip.
2006-03-29 13:17:09 +02:00
2770bcb21c
Merge with http://www.denx.de/git/u-boot.git
2006-03-24 15:43:16 +01:00
40b0bafbb2
Added config options CFG_MONAHANS_RUN_MODE_OSC_RATIO and
...
CFG_MONAHANS_TURBO_RUN_MODE_RATIO for configuring the Monahans core
frequency.
2006-03-24 14:35:25 +01:00
ba70d6a417
delta board: DA9030 initialization and i2c support. Some minor changes to
...
make the pxa i2c driver work with the monahans cpu.
2006-03-24 12:23:27 +01:00
7b4fd36b03
Add support for MPC859/866 Rev. A.0
2006-03-18 23:31:12 +01:00
dc9e499c62
Support for DDR with 32-data path. Addotional notes on injecting
...
multiple-bit errors.
2006-03-16 17:46:46 +01:00
4c8d1ecce2
Add support for ECC DDR initialization on MPC83xx.
2006-03-14 16:23:35 +01:00
61f25155ac
Add DMA support for MPC83xx.
2006-03-14 16:14:48 +01:00
6d8ae5abb5
Add sync in do_reset() routine for MPC83xx after RPR register
...
was written to. It is need on some targets when BAT translation
is enabled.
2006-03-14 16:12:48 +01:00
cd94ba397e
Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
2006-03-14 16:02:31 +01:00
a7c66ad2e5
Correct shift offsets in icache_status and dcache_status for MPC83xx.
2006-03-14 16:01:25 +01:00
ff7fefe679
Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and
...
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006
2006-03-13 12:37:35 +01:00
f3fecfe6d7
Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
...
Patch by Stefan Roese, 13 Mar 2006
2006-03-13 09:43:01 +01:00
9a7b408c11
cpu/ppc4xx/start.S : exceptions are enabled after relocation
...
Patch by Cedric Vincent, 6 June 2005
2006-03-13 09:42:28 +01:00
9551530615
au1x00_eth.c: check malloc return value and abort if it failed
...
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13 01:00:22 +01:00
b38dbd4622
Fix bug in [id]cache_status commands for MPC85xx processors;
...
should look at LSB of L1CSRn registers to determine if L1 cache is
enabled, not the MSB.
Patch by Murray Jensen, 19 Jul 2005
2006-03-13 00:46:05 +01:00
795bee8496
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx
2006-03-12 21:33:52 +01:00
a3f0169880
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infr
2006-03-12 19:11:42 +01:00
23466d6a33
Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
...
Patch by KokHow Teh, 16 Jun 2005
2006-03-12 16:14:29 +01:00
8e7b703a62
Coding Style cleanup
2006-03-12 02:55:22 +01:00
6cb142fa3b
Add missing Blackfin files.
2006-03-12 02:12:27 +01:00
d2ed2f661b
More GCC 4.x woes
2006-03-11 23:07:09 +01:00
d52fb7e3d1
Some code cleanup for GCC 4.x
2006-03-11 22:53:33 +01:00
0be248fa9a
Cleanup (get rid of debug code that sneaked in)
2006-03-07 00:22:36 +01:00
951a954b77
Merge with /home/wd/git/u-boot/master
...
Code cleanup.
2006-03-06 23:18:48 +01:00
43638c674a
Cleanup of NAND support of delta board using the Monahans Data Flash
...
Controller.
2006-03-06 15:04:25 +01:00
bf7cac033b
Lots of new stuff:
...
* Debug message can be turned on and off.
* Waiting for events now times out.
* Implemented RESET command.
* Added appropriate nand_bbt_descriptor and nand_oobinfo.
Remaining Problems:
* Read Status still behaves weird an returns invalid stuff sometimes.
* ECC Placement does not respect our scheme in nand_oobinfo.
2006-03-04 18:35:51 +01:00
e8cd00835e
All subsystem clocks not immediately need are turned at reset.
2006-02-28 23:11:07 +01:00
00c35bd214
Added GPIO initialization of DF signal. Still not working.
2006-02-28 22:51:01 +01:00
86ea5f93d7
Initial port to MCC200 board (work in progress)
...
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00
2688e2f972
Enable address translation on MPC83xx
...
Patch by Kumar Gala, 10 Feb 2006
2006-02-10 15:40:06 -06:00
e0269579a5
This is the first commit for the u-boot zylonite port. The following has be
...
done so far:
* created zylonite board dir (based on lubbock)
* extended some - but not all pxa sources and headers for Intel
Monahans support (CONFIG_CPU_MONAHANS)
* created Makefile zylonite target + MAKEALL entry
* added some debug nonsense, remove later, grep for mk@tbd
Status: compiles (eldk-4.0), and can be started with BDI, but runs forever
and doesn't halt at breakpoints. Hmmm...
2006-02-07 20:04:48 +01:00
eacbd31775
Add support for Freescale M5271 processor
2006-01-26 17:35:56 -05:00
Wolfgang Denk