abort if it is -1
Change-Id: Ie14c18679ff74529731558d6742f63ebfb9fe97b
Reviewed-on: https://code.wireshark.org/review/15958
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a reference count to stat_tap_table_ui to prevent bad deallocations.
Bug: 12437
Change-Id: Ib9b1f929d08a574c306dc755ec416ab94a3fd6d3
Reviewed-on: https://code.wireshark.org/review/15920
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The stream is not just shown, but also saved in ASCII, EBDIC, Raw, etc.
Change-Id: Ic29e3273ebb9a3eca0fe791bdd48606c4be3b828
Reviewed-on: https://code.wireshark.org/review/15957
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add padding on the left side of the search frame in order to reduce the
amount of mousing required on large screens.
Change-Id: I1dcd8c4a103f4a462f4ab60a22a93b8c0f28b055
Reviewed-on: https://code.wireshark.org/review/15928
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
g6ff19ff tried to access cinfo by following a chain of pointers from
expert_info. Access cinfo from cap_file_, which is more reliable. While
we are at it, let's explicitly check the pointer validity.
Change-Id: I0da72c5b1d2230a49c125a1b57c81c3115c4f2fb
Reviewed-on: https://code.wireshark.org/review/15901
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
make sure that generated include files are picked up only from the
directories set by -I (or /I), not from the current directory
if we use #include "file.h", Visual Studio searches for file.h in the
same diretory as the source file that includes file.h
if we do an out-of-tree build with cmake and the source directory
contains files from an in-tree build (done with autotools), we might end
up including the wrong file
Change-Id: Iaaed2626258b6ff0c12485fe3f436bd03bbb5adf
Reviewed-on: https://code.wireshark.org/review/15873
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make the main window tab order more closely match the GTK+ UI. Draw a
focus rect in the byte view text while we're here.
Change-Id: I04212c14ea7f0d6865b709533246760adc02f45a
Reviewed-on: https://code.wireshark.org/review/15862
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
As noted in gb7897dd, CaptureFilterCombo needs to be read-only until the
app is initialized. Move the code to do so to MainWelcome, otherwise the
capture filter entry in CaptureInterfacesDialog starts out read-only and
stays that way. Disable / enable the entire CaptureFilterCombo instead
of setting its lineEdit read-only status, which provides a stronger
visual indicator.
Change-Id: Ic7bf5b5631b861ecf4dc8cca67beb5bf4ed27510
Reviewed-on: https://code.wireshark.org/review/15859
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When "group by summary" is enabled, packet items contain a packet number
followed by a lot of empty space. Fill it with the contents of the Info
column.
Set the first column title to "Severity" or "Packet" depending on the
item selection.
Change-Id: Iff96ab2ec631300ec8f08e55019e191e88cff84a
Reviewed-on: https://code.wireshark.org/review/15814
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Added support for importing from hex dump without offsets.
This will create one packet with all hex values found in the file.
Change-Id: I0414441721078befeb59aa6a87b9412646cfcf5c
Reviewed-on: https://code.wireshark.org/review/15743
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Try to make inactive+selected packet list items more visible by drawing
a border around them. Make an exception for Windows 7 and Vista if a
theme is active.
Bug: 12010
Change-Id: I974069dda92588b80772f577f319569751ff3347
Reviewed-on: https://code.wireshark.org/review/15816
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fail if:
1) you have an AT_NONE address with data;
2) you have a non-AT_NONE address with a zero length and a
non-null data pointer, or with a non-zero length and a null
data pointer.
When comparing addresses for equality, just make sure the types are the
same, the lengths are the same and, if the lengths are non-zero, the
data is the same; don't treat AT_NONE specially - the "lengths are
non-zero" check will make sure we do the right thing.
Make sure when we create an AT_NONE address it has a zero length and
null data pointer.
Change-Id: I5c452ef0d140c2d9aef3004f1cfd124a95b78fb2
Reviewed-on: https://code.wireshark.org/review/15839
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the ability to group expert info items by summary and enable it by
default. This more closely matches the GTK+ UI behavior.
Show matching item counts while we're here.
Bug: 12218
Change-Id: Ic02267da8435fb70015de8dd15e0ac46faabbee9
Reviewed-on: https://code.wireshark.org/review/15796
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Device dialog appears when user double clicks on device in
Devices dialog (Bluetooth->Devices). It provides
summary of device, like BD_ADDR, name, timeouts, etc.
Base on information from HCI layer, so this feature is more interesting
for local devices (capturing on its side). Each field has changes counter,
what mean that value at specified field changes in time, for example:
user change device name 3 times. Please note that initial change
is not counted. It means that you can see fielkd without any value
then change occur and counter is not increased. It will be increased
next time. Reason for that is in most cases field value is unknown
at start.
Change-Id: Ife0a6bd454eac00a28f8eb2906e1b395695b0307
Reviewed-on: https://code.wireshark.org/review/15793
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
See g21754f43e for detail
There is always some other Q_UNUSED but include on #if/#endif...
Change-Id: Ib2283660c91787acbf6392841faa3db6aed39438
Reviewed-on: https://code.wireshark.org/review/15803
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Set they to zeros at startup like other fields.
Change-Id: I820e7a0ce8fad5726448cb83f85235ecf578d77d
Reviewed-on: https://code.wireshark.org/review/15792
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Prefix operators are supposed to be more efficient with iterators,
so lets use them instead of postfix operators.
Change-Id: I3090e4954c5cb67db47c88e2874b1a8ac52aa2cd
Reviewed-on: https://code.wireshark.org/review/15546
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Qt and GTK+ can have wildly different notions about the top-left
position of the main window, particularly in multiple-screen
configurations. For example, on OS X with the following monitor
arrangment:
g .---------.
| |
| |
q--------.| |
| |`---------'
| |
`--------'
GTK+ positions windows relative to 'g' and Qt positions windows relative
to 'q'. As a result it's easy for one UI to clobber the settings of the
other.
Split the geometry_main_x and geometry_main_y recent settings into Qt
and GTK+ versions.
In the Qt UI, try moving the main window onscreen before falling back to
the default geometry. This keeps us from losing our size settings.
Add a link to a Qt geometry bug.
Change-Id: If7ae0dcc1719e646299ee3bbf1c88743f655c9a0
Ping-Bug: 12389
Reviewed-on: https://code.wireshark.org/review/15775
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
That way you get dropdown suggestions for filter completion.
Change-Id: I2b9d417ca50559ffdc8bd3f7f0e1bbc185c1384d
Reviewed-on: https://code.wireshark.org/review/15592
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In the Capture Interfaces dialog, make sure we have exactly one of a
"not applicable" dash or a checkbox. Otherwise if your interface falsely
reports that it supports monitor mode you might end up with both.
Change-Id: I9b256f1ef0e8ff32626e7f2b526130f3c110d142
Reviewed-on: https://code.wireshark.org/review/15761
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make sure audio_stream_ is non-NULL before we try to use it. Delete
audio_stream_ more gracefully and add a note about mutexes on OS X and
Windows.
Bug: 12166
Change-Id: I12e76c49e631bc1de813c5c7d82c7d928c71237e
Reviewed-on: https://code.wireshark.org/review/15759
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add zoom in and zoom out actions. Changes only affect the X axis (the
spacing between the dashed lines).
Bug: 10693
Change-Id: I145e8501239f26e1be6135bffabdebec14f262c1
Reviewed-on: https://code.wireshark.org/review/15746
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Put direction indication label and checkbox in a HBox to align vertical.
Change-Id: I2aa7846aef25e9f080349e9dfef5c191b8d323e3
Reviewed-on: https://code.wireshark.org/review/15742
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Make the netfilter rules more sensible as described in bug 2482.
Switch to long names while we're here.
Ping-bug: 2482
Change-Id: I9e44c4ed88ed83ff1d7d478acea83fa0c2af5cac
Reviewed-on: https://code.wireshark.org/review/15701
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Done for performance improvements.
This could probably be done in checkAPIs.pl, but this was just
a quick manual check with grepping.
Change-Id: I91ff102cb528bb00fa2f65489de53890e7e46f2d
Reviewed-on: https://code.wireshark.org/review/15751
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Don't put them in the summary structure; the summary routines should
calculate summary statistics, not dig up every bit of information that
*could* appear in a summary.
Instead, have the GUI code call wtap_file_get_shb() to get the SHB
information and call wtap_optionblock_get_option_string() to fetch the
option values.
Move the option code definitions into wtap_opttypes.h, as they're used
by the API.
Change-Id: Icef11f5fb30fdc3df1bb0208aae9ed0aebaf0182
Reviewed-on: https://code.wireshark.org/review/15748
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I5a6133cb0ec0bf8807bb3bdfa3721657420b53a2
Reviewed-on: https://code.wireshark.org/review/15730
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 11788
Change-Id: I3f4df884d98903222de8a340de6a08e680687b0a
Reviewed-on: https://code.wireshark.org/review/15727
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
fixing problems in qt ui code comming from the fact that qreal type is float on
ARM platform and double on other platforms, which causes build errors on ARM
(not all casts are probably strictly necessary)
Bug: 12483
Change-Id: Ife5e6d3649a7ee1ad4e7eadffe9f4484ff2718de
Reviewed-on: https://code.wireshark.org/review/15723
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add an option to display the "follow" data as UTF-16.
Bug: 237
Change-Id: Id95ffc014b8ef718f3b6e9f3415806ada309c3a2
Reviewed-on: https://code.wireshark.org/review/15702
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the Firewall ACL Rules dialog. Try showing all valid rules for a
given product instead of making the user select from a combobox. We can
add the combo back easily enough if that's desired.
Add a rule hint field and use it in the Qt and GTK+ UIs.
Bug: 12469
Change-Id: I39dd840e9838f96d7c5e2b4c34662811c21d0386
Reviewed-on: https://code.wireshark.org/review/15689
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Switch from enabled/disabled comboboxes to checkboxes. This requires
less clicking on the user's part and less translating.
Draw em dashes instead of "n/a" for non-applicable items, and use
the disabled palette when drawing them.
Change-Id: Ic97b6d44734b679bbeee00e9c2a322e7b8a67247
Reviewed-on: https://code.wireshark.org/review/15661
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
DisplayFilterEdit deals with entire filters and some edit boxes just need a
single protocol field. This control will do the trick.
Bug: 12321
Change-Id: I8e5837ea9a6955ada29b7e516ea022ab1dd46f0d
Reviewed-on: https://code.wireshark.org/review/15595
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This fixes a compile error with Qt version 4.8.5-8 as installed in RHEL 7.0:
sequence_dialog.cpp: In member function 'void SequenceDialog::mouseMoved(QMouseEvent*)':
sequence_dialog.cpp:306:35: error: 'escape' is not a member of 'Qt'
QString raw_comment = Qt::escape(sai->comment);
^
Change-Id: Ibbf62123441645471d66aa329f0d63d0ee198017
Reviewed-on: https://code.wireshark.org/review/15682
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
For SEQ_ANALYSIS_ANY, color each sequence diagram item according to its
associated packet. For SEQ_ANALYSIS_TCP, color each item according to
its stream.
Bug: 12065
Change-Id: Ib43490fe55039fbcfa793223b5850233a2694a26
Reviewed-on: https://code.wireshark.org/review/15651
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
QDialogButtonBox does a fine job of creating and managing buttons.
Instead of creating our own "Start" button, just rename the "OK" button.
This matches what we do elsewhere, e.g. in the Extcap Options dialog.
Change-Id: I3c5eec1f01925f7b82c4e7360d685acbe4bb2fea
Reviewed-on: https://code.wireshark.org/review/15653
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Copy in some text from bug 12419.
Change-Id: Ice3c6cab1f5c32033de3a9a78d7945c31d932755
Reviewed-on: https://code.wireshark.org/review/15649
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The UI crashes when saving a RTP due to a division by zero.
To reproduce: open a RTP capture file, Telephony->RTP->RTP Streams,
then choose a stream, ANALYZE, SAVE, AUDIO, choose a path.
Bug: 12211
Change-Id: I51d61eb6797fc82c1b03254abaec839d3a1e281d
Reviewed-on: https://code.wireshark.org/review/15621
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The column type is automatically changed to Custom if user clicks
on the "Fields" or "Field Occurrences" column. This can be
accidental and cause the user grief if he doesn't realize it.
If there is no text in the field, restore the type to its
original value.
Bug: 12465
Change-Id: I0453f43be13077aba58cca61011eeff9ca9b83b2
Reviewed-on: https://code.wireshark.org/review/15600
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Otherwise, if you've modified the file (added, removed, or changed
comments), and you try to close the file or quit, and answer "Save" to
the "save your work?" question, Wireshark tries to clean up the wmem
scopes, but the file scope hasn't been left, and wmem crashes with an
assertion error.
(The GTK+ version does the close, so it doesn't have the bug.)
Change-Id: Ie5942e415cfab1907e29b09926a62e2679aca6ee
Reviewed-on: https://code.wireshark.org/review/15598
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The second argument is a bool, so pass bool constants.
(The C integer constants presumably get coerced correctly, but we might
as well be clean.)
Change-Id: Ia170b443bb9933a8916d9dc25d7492fc8acf1f22
Reviewed-on: https://code.wireshark.org/review/15596
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Clean up the next / previous logic a bit. If the selected item is out of
range, move it in-range.
Change-Id: Idd5f83e7f4ccf960500f261e1c2292da6cecab57
Reviewed-on: https://code.wireshark.org/review/15591
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add next (N) and previous (P) keyboard shortcuts. The GTK+ UI uses the
down and up keys, but we're already using those for panning the Y axis.
Add a scroll margin when using N and P.
Add mouse wheel and trackpad support.
Disable mouse dragging for now until we figure out how to limit it to
our axis boundaries.
Ping-Bug: 12419
Change-Id: I292319928db365206277bf2bb3e42e14ef811ff0
Reviewed-on: https://code.wireshark.org/review/15559
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Escape HTML markup before showing hint text. Otherwise things like SIP
addresses won't be displayed correctly.
Change-Id: I5ceae978af0ff9e253dae4d3ec8ad9da20948de0
Reviewed-on: https://code.wireshark.org/review/15561
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add "Time" and "Comment" labels to the sequence diagram similar to the
GTK+ UI. Draw a border around the diagram as well.
Widen the default spacing and set it to a simple em-width multiple.
Fix our port number alignment.
Copy over the sequence diagram colors from the GTK+ UI and add them to
ColorUtils. Color sequences according to their respective conversation
numbers.
To do:
- Add zoom.
Ping-Bug: 12419
Change-Id: I3f9b4ffbfcc34aae1c38e303cd36ff207be247b1
Reviewed-on: https://code.wireshark.org/review/15554
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If we don't, Save As will always fail.
(I broke this in 6a992182ce)
Change-Id: I4abfe495af3aee470331ae5464acbd7d08028bf0
Reviewed-on: https://code.wireshark.org/review/15547
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Exit early if there is no color rule before setting the parent menu enabled/disabled.
Bug: 12458
Change-Id: I37dc093681d3dc28afb60df7fd45e49ab804b2a1
Reviewed-on: https://code.wireshark.org/review/15538
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When the user clicks Save As in the Follow Stream window, check that the
selected target file can be opened for writing. Bring up a warning box
if the file is not writable.
Change-Id: I76e67b064377dd432d3b14592f5096b99d9968c0
Reviewed-on: https://code.wireshark.org/review/15536
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I5f18d7ed5f4c830ce201fa6929fc1b7c0259692e
Reviewed-on: https://code.wireshark.org/review/15515
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: João Valverde <j@v6e.pt>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Implement keyPressEvent and do nothing... However it "takes focus"
from button box and jump to frame that some items in tree widget point.
Change-Id: Ib08f1588f20bce66fa945bf952770600c625233c
Reviewed-on: https://code.wireshark.org/review/15455
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Draw a bottom border so it looks a bit less odd on OS X. This could use
some further tweaking.
Change-Id: Id76d0a0cece672b927d6217c7a9f970c1ba212bc
Reviewed-on: https://code.wireshark.org/review/15391
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Definition of std:sort() is in <algorithm> header. Include it to
make Wireshark buildable again.
Change-Id: Ice68013b0e06461faab1f4f0296e26b426ff92a1
Reviewed-on: https://code.wireshark.org/review/15456
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Make sure all of the widgets in the main welcome tab loop have their
AccessibleName properties set.
Set AccessibleTextRole for each of the items in the recent file list and
in the interface list.
Ping-Bug: 9284
Change-Id: I247ce7ed68eda82a27a34d98a4bab1bcbed760b5
Reviewed-on: https://code.wireshark.org/review/15405
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
While we are at it, let's sort the rows in ascending order also in
RTP stream dialog
Bug: 12405
Change-Id: Icf96fa071d5d49bcd1c3673c2a5e55b51b359eaa
Reviewed-on: https://code.wireshark.org/review/15493
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
QListWidget::takeItem removes an item from the list but doesn't free it.
Call delete instead.
Change-Id: I81b1315d0851518935f542c53455b283e26e5dc5
Reviewed-on: https://code.wireshark.org/review/15474
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Added "Ctrl+Alt+C" as shortcut for packet comment.
Added "Ctrl+Alt+Shift+C" as shortcut for capture comment (GTK)
resp. for Capture File Properties (QT)
Bug: 12410
Change-Id: I1ba61a38829c35f3bb166a94cda4bec3901c7ef1
Reviewed-on: https://code.wireshark.org/review/15300
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
The speex headers use some CPP magic to rename the API.
Using the public names in the calling code reduces obfuscation and
allows linking with libspeexdsp.so also.
Change-Id: I10c6cd2de6b237400224d3db6a9995e646747311
Reviewed-on: https://code.wireshark.org/review/15400
Petri-Dish: João Valverde <j@v6e.pt>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
QListWidget::takeItem does nothing if the row is invalid. This is the
case when we pass it ::count(). Make sure that we remove a valid row and
that our loop will terminate.
Follow-up to g174dc98.
Change-Id: I7e695cc04b2f3b5c28a8cc70af0579d787ff8737
Reviewed-on: https://code.wireshark.org/review/15417
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Always loadFromData when ShowAsImage to avoid situations where a valid
image is not loaded. Enable print/copy/save-as buttons when loading
a valid image.
Change-Id: I8461f560e1e41388b59f7d8a46f30d511cf2e4a4
Reviewed-on: https://code.wireshark.org/review/15369
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Previous patches converted all fvalue_to_string_repr calls to expect
an allocated buffer (and not a passed in one). Now changing signature
to force an allocated buffer. Added wmem in case that can be taken
advantage of within epan (and since the function signature was changing
anyway).
Change-Id: Ica1ac4a9a182ce0e73303856329e198d9d525b7b
Reviewed-on: https://code.wireshark.org/review/15343
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make sure we disable transience in both the parent and child scroll bar.
This keeps the child from disappearing on Yosemite when "System
Preferences → General → Show scroll bars: When scrolling" is enabled.
Add some comments about what will be required to properly handle
transience.
Change-Id: I6fc37ef1783b6c8dea179f08ad6c4343c7cf8095
Reviewed-on: https://code.wireshark.org/review/15336
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Only the payload save should be deactivated
Bug: 12406
Change-Id: I8dd53c0b0c1ea4568f0ff292806656bfb65a6566
Reviewed-on: https://code.wireshark.org/review/15322
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Make sure we redraw the far overlay image when we unmark all packets.
Change-Id: Ib94af9029ee5c0a8e29a27c3b8aa8c84608fb9f6
Reviewed-on: https://code.wireshark.org/review/15266
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This patch introduces the "-U tap_name[,filter]" tshark option and
is similar to the "Export PDUs as file" option in Wireshark.
Wireshark implements this feature by reopening a capture file, applying
a tap and finally opening the temporary file. Since tshark knows
in advance that a PDU export is needed, it can optimize by not creating
the temporary file and perform the export at the first opportunity.
This patch splits the opening/tapping functionality from error reporting
since tshark does not need a temp file and has no dialogs.
The capture file comment is now specified explicitly as there is no
"current file" anymore if the tap is running without active file.
TODO:
- Review whether it is acceptable to overwrite save_file in tshark.
- Add documentation (tshark manpage).
Bug: 3444
Change-Id: Ie159495d42c32c2ba7400f2991b7b8185b3fda09
Reviewed-on: https://code.wireshark.org/review/5890
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In Qt 4, QScrollBar::setRange isn't a slot. Add a setChildRange
slot and connect to it instead. Add a QT_VERSION_CHECK breadcrumb in
a comment.
Change-Id: Ie28bbb6bd8249c31154a2fe236667adf1d53df61
Reviewed-on: https://code.wireshark.org/review/15215
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
add a version check in order to fix compilation with older Qt versions
(I couldn't figure out when exactly SH_ScrollBar_Transient was
introduced. It appears in the Qt 5.6 documentation, it's unavailable in
Qt 5.2)
Change-Id: Idf7ea1302e4a40e290a6750cbe077d9d2b7b56a8
Reviewed-on: https://code.wireshark.org/review/15196
Reviewed-by: Gerald Combs <gerald@wireshark.org>
this avoids warnings about unused variables
Change-Id: I0ee033f90c1387615ffc167161e53f4293d89763
Reviewed-on: https://code.wireshark.org/review/15195
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Q_NULLPTR is not defined in Qt4
Change-Id: I0dd5444c6c019b7e8f1a346d9e12432d9b306d8a
Reviewed-on: https://code.wireshark.org/review/15197
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Qt 5.2 added QMenu::setAsDockMenu. Use it to add recent items to the
Wireshark dock menu.
Add QWinJumpList code which does something similar. Comment it out
because it does it slowly and not-quite-correctly.
Change-Id: I801b1037b998516eacab695f982d7d6e889bafb6
Reviewed-on: https://code.wireshark.org/review/15166
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a #define USE_SYSTEM_LANGUAGE for the language string meaning "use
the system setting", and use that instead of hardcoding "system" in
various places.
If "language" is null, don't try to write it to the file with fprintf()
- on *most* systems, that prints "(null)", but on some systems, such as
Solaris, it *crashes*. Write USE_SYSTEM_LANGUAGE instead. Check for
"(null)" and treat it as meaning "use the system language".
Map "auto" to "use the system language" as well, for backwards
compatibility.
Change-Id: Iba9be540a5139e9cca8bddd0761ee4cbf0f79a49
Reviewed-on: https://code.wireshark.org/review/15147
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Force the display filter toolbar to update its layout when we recreate
our filter buttons. This ensures that we draw the overflow icon in
the right place.
Change-Id: Ibfb34b77d565e8db15bb2576249e0e3016993083
Reviewed-on: https://code.wireshark.org/review/15145
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Split OverlayScrollBar into parent and child scroll bar widgets. This
gives us two packet list scroll bars: a packet map, which draws and
operates on nearby packets and a normal scroll bar.
The packet map is drawn to the left of the child scroll bar. This gives
us more room to draw and doesn't obscure the scroll bar itself (which is
a problem on newer versions of Windows). When the user clicks on a
portion of the map, scroll to that part of the packet list.
Draw marked packet ticks over the normal scroll bar. Marked & ignored
are on the left, time references are on the right.
To do:
- Borrow more from packet fence and graph something (packet size? time
delta?)
Change-Id: Ie952fcbd98fd0e047200f2279cb63227feabf5b1
Reviewed-on: https://code.wireshark.org/review/15046
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
By default GtkToolbar shows overflow items in a menu. QToolBar shows
them in a bigger toolbar. This is a problem for users with lots of
display filter expressions because expanding the display filter toolbar
can make it very tall.
QToolBar can optionally overflow into a menu, but as noted in
https://bugreports.qt.io/browse/QTBUG-2472 there isn't a way do so
directly, e.g. with a setter. Force an overflow menu in the display
filter toolbar by adding a child QToolBar and adding filter expression
actions to it.
While we're here, set the minimum width of the display filter edit to
two-thirds of the width of the main window.
Change-Id: I49cd58397e087f1aa79b5bbce471f827e9804148
Reviewed-on: https://code.wireshark.org/review/15134
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Copy over and adapt SupportedProtocolsDialog::fillTree, which fills in
the protocol tree after the dialog is shown processes display events
while the tree is being built.
Change-Id: I25082fd94c511db6a94aaed1c463ba1c1e64855c
Reviewed-on: https://code.wireshark.org/review/15079
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use libSSH 0.7.2 compiled with MinGW(32|64) and linked with zlib and gcrypt support
Change-Id: I7c17d1ba3dd1890e2f83c119f5ea851834807e43
Reviewed-on: https://code.wireshark.org/review/12117
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This fixes a crash when changing the SCCP dissector's users table when
finishing the edit of a string column by clicking elsewhere (rather than
pressing Enter/Return) or when changing an enum column.
(The SCCP dissector depends on that update callback being called before the
copy callback.)
To do this:
1) Use the editingFinished signal rather than looking for Enter/Return key
presses (so that a focus change is processed as the end of an edit).
2) Call the update callback when an enum field changes.
Bug: 12364
Change-Id: I1884c67b6e873b46afe33703581d0b3dccbbdaf1
Reviewed-on: https://code.wireshark.org/review/15059
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The conversation dialog doesn't do anything different with the name
resolution checkbox than any other subclasses of the traffic table
dialog do, so leave it up to the parent class.
Change-Id: I07f6c09b931ed10655f5921c0a4ab5d439dd6bcd
Reviewed-on: https://code.wireshark.org/review/15065
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This makes the display change if you turn the name resolution checkbox
on or off.
Change-Id: I873832b103b61e1e566523a1ae1c4211937c7bae
Reviewed-on: https://code.wireshark.org/review/15063
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows keeping the code-sharing with the static linking.
This "fixes" a hypothetical ABI mismatch with wsutil and avoids pulling more
external dependencies to wsutil than strictly necessary.
A nice side-effect is that libwsutil no longer depends on version.h.
Follow up to f95976eefc.
Change-Id: I8f0d6a557ab3f7ce6f0e2c269124c89f29d6ad23
Reviewed-on: https://code.wireshark.org/review/15002
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
The conversation dialog does this, and we must do so to, in order to
fetch the initial setting of the name resolution flag.
Bug: 12353
Change-Id: I7ee97960216ff89a612c076edcfaad8e547a27d9
Reviewed-on: https://code.wireshark.org/review/15029
Reviewed-by: Guy Harris <guy@alum.mit.edu>
QT ships with a base set of translated terms (qt_xx.qm). Therefore
we don't need to add these terms (like "Ctrl" or "Down") used in
shortcuts to the wireshark_xx.ts files.
The ts files are generated by running lupdate.
To get the new ts files (without the shortcut terms) it is necessary
to run lupdate with option "-no-obsolete".
Change-Id: I6346a866ae9a1b58fa23ea089c43c90ec0dc0225
Reviewed-on: https://code.wireshark.org/review/14848
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Make it easier to link the hex with ascii bytes. The background color
will become yellow for bytes with the mouse focus.
Bug: 11547
Change-Id: Iab87e598a302ecf7bb7b37cd6ad55ea291c02b82
Reviewed-on: https://code.wireshark.org/review/14716
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Enable and disable individual actions instead of their parent menus in
order to keep them discoverable.
Do the opposite for Colorize Conversation items so that we don't make
the user traverse the menu hierarchy unnecessarily.
Change-Id: I81770dbbb2d715a2131eb754fedaaadcc8803da2
Reviewed-on: https://code.wireshark.org/review/14558
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Call proto_initialize_all_prefixes when we open the Display Filter
Expression Dialog. This matches the GTK+ UI behavior.
Change-Id: Ie8f8a618d29667fce1f61b6e854baed85c54a569
Reviewed-on: https://code.wireshark.org/review/14920
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Replace some function calls with their non-deprecated equivalents so
that we can remove _CRT_NONSTDC_NO_DEPRECATE from CMakeLists.txt and
config.nmake.
Leave _CRT_SECURE_NO_DEPRECATE in place. Removing it failed with 145
warnings and 72 errors.
Note that we could probably improve startup performance by using wmem
in diam_dict.*.
Change-Id: I6e130003de838aebedbdd1aa78c50de8a339ddcb
Reviewed-on: https://code.wireshark.org/review/14883
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Mark the capture filter field as readonly until initialization is
completed. This avoids useless entries in the recent capture filters
list and fixes a use-after-free when typing during startup.
(This use-after free occurred when a new item is added to the recent
filters list which invalidates the previously retrieved list).
Change-Id: Ifae9444986436a60781bf5f83a6e650501ccc4d5
Reviewed-on: https://code.wireshark.org/review/14740
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The hotkey was intentionally removed in Ie505650889212082e088a525f4b82e62b9177b0d.
The hotkey is present in GTK version but missing in QT version.
Change-Id: Id54e704cd0398b4f07f00c9d1d298409b90d927b
Reviewed-on: https://code.wireshark.org/review/14845
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Alas, QByteArray's constructor takes an int, not a size_t, as a size.
Explicitly cast the size down to an int.
Change-Id: Idc24b5920e8e417dd8555628d685f94224fe47e1
Reviewed-on: https://code.wireshark.org/review/14836
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Make FollowStreamText a subclass of QPlainTextEdit instead of QTextEdit.
For large amounts of text, the former should be less unbearably slow
than the latter. Increase the maximum stream size to 500MB. This isn't
perfect but it's much more usable than 2MB and much easier than the next
step, which is to write our own text display widget.
Process UI events while we fill in the stream data. This gives us
behavior similar to the GTK+ UI and is similar to what we do in other
dialogs.
Switch from g_memdup+g_free to a QByteArray in the Qt UI and GByteArray
in the GTK+ UI.
Don't call readStream twice.
Make sure we free all of our stream data in the Qt UI. This fixes a
serious memory leak.
Ping-Bug: 11777
Change-Id: Ibad9bde86692ae07a80660566d1e661ab8b64601
Reviewed-on: https://code.wireshark.org/review/14271
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
master-branch libpcap now generates a reentrant Flex scanner and
Bison/Berkeley YACC parser for capture filter expressions, so it
requires versions of Flex and Bison/Berkeley YACC that support that.
We might as well do the same. For libwiretap, it means we could
actually have multiple K12 text or Ascend/Lucent text files open at the
same time. For libwireshark, it might not be as useful, as we only read
configuration files at startup (which should only happen once, in one
thread) or on demand (in which case, if we ever support multiple threads
running libwireshark, we'd need a mutex to ensure that only one file
reads it), but it's still the right thing to do.
We also require a version of Flex that can write out a header file, so
we change the runlex script to generate the header file ourselves. This
means we require a version of Flex new enough to support --header-file.
Clean up some other stuff encountered in the process.
Change-Id: Id23078c6acea549a52fc687779bb55d715b55c16
Reviewed-on: https://code.wireshark.org/review/14719
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Previously, changing a packet in the packet list would lose the
currently selected field item in the packet tree. After this patch, this
issue no longer occurs because the selected field is focussed again.
The approach is to remember the header field ID on the path from a field
to its root. Limitations of the current simple approach is that multiple
fields/trees under a tree might result in the wrong selection. This is
better than nothing though.
This patch greatly helps analyzing a capture file which has the same
format, except that I need to check a data source for decrypted data.
Previously I would have to scroll down and select the field to see the
data source which also made it impossible to quickly switch between
packets and compare them.
Change-Id: Ic113ca9245fd9faa10f91182794c50cfde8d10f4
Reviewed-on: https://code.wireshark.org/review/14697
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Do not remove byte view on closing a capture file. For this to work, the
tree items must also be remembered.
Change-Id: Ice5cd1006b957e2d1331effc15c4c0a9de89916d
Reviewed-on: https://code.wireshark.org/review/14715
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
According to the Visual Studio 2013 profiler here, we spend about 4% of
our startup time creating the Capture Interfaces dialog. Hold off on
doing that until the user wants to see the dialog. Do the same for the
File Set dialog.
While we're here, make sure MainWindow has fewer children when setupUi
is called. setupUi calls connectSlotsByName, which iterates over all
child objects.
Change-Id: I253e6dc5b7e73a6cb7b7036637e336f449449c4a
Reviewed-on: https://code.wireshark.org/review/14732
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Limit the amount of event processing SplashOverlay does. Let QWidget
take care of painting.
Change-Id: I9176baeba2cc9203e50c02029d85689f8908daba
Reviewed-on: https://code.wireshark.org/review/14771
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When a packet dialog is being constructed, the layout is apparently not
fixed yet and the byte view is technically not visible. Fix the hidden
byte pane by not hiding it when it is not (yet) visible.
Bug: 11760
Change-Id: I0494fa16a5ed89ff31f934ba682a6bb884cc0e2e
Reviewed-on: https://code.wireshark.org/review/14713
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Change-Id: I4c7c5aeaa1fa452605cf02a5c86dfe161c451f65
Reviewed-on: https://code.wireshark.org/review/14654
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Add a ConversationAction and ColorizeAction classes which respectively
handle conversation filtering and colorization.
Move conversation menu initialization to initConversationMenus and call
it once at startup. This keeps us from leaking quite a bit of memory
each time we select a packet or proto tree item.
Bug: 12044
Change-Id: I32e8cedaba08a419d5da6a7a9db31c910909f450
Reviewed-on: https://code.wireshark.org/review/14516
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Instead of text_import_setup() and text_import_cleanup() routines, and
the actual scanner invocation being done in the dialog box, have a
text_import() routine that does all the work.
Change-Id: Ifd8a999618dbb411d613e6596484e4c2e013431d
Reviewed-on: https://code.wireshark.org/review/14647
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way each (CaptureFileDialog) user doesn't have to (remember to) check the
preference, etc., to figure out what directory to start in.
Change-Id: Ifa60e1ef9dbd11689a3f72906997cf3ed8ce259c
Reviewed-on: https://code.wireshark.org/review/14550
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 12105
Change-Id: Ib2398e5213b2ef2501660d1bba13dca66f04bd55
Reviewed-on: https://code.wireshark.org/review/14549
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add an ::event member function to SyntaxLineEdit that looks for
ShortcutOverride events and accepts them. This keeps them from being
interpreted as shortcuts in the main window.
Note that the current code accepts everything, and that we should probably
restrict this to AltGr only.
Bug: 12270
Change-Id: I01765ce2447d220a102d97fcbbe47579341ce075
Reviewed-on: https://code.wireshark.org/review/14570
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Make our timerEvent code more consistent. Make sure we use timer IDs and
that we call our base class timerEvent everywhere.
Change-Id: Ib67daa459a8a2f9b67487c3952b7b35c7f162f7e
Reviewed-on: https://code.wireshark.org/review/14480
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Using cmake -DENABLE_EXTCAP=no or ./configure --without-extcap.
Some documentation fixes too.
Change-Id: Iebf9c843d67e10a32de1a62904de8f88b872ec99
Reviewed-on: https://code.wireshark.org/review/14522
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Call QTreeWidget::timerEvent from ProtoTree::timerEvent, otherwise we
turn into the candy factory episode in I Love Lucy.
Do the equivalent in WirelessFrame while we're here. Neither QFrame or
QWidget use timers, but there's no guarantee that this will be the case
in the future.
Bug: 12258
Change-Id: I3cb0096fe2ed87176fec8d7361260b5388d75530
Reviewed-on: https://code.wireshark.org/review/14470
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use "Funnel <title>" as dialog name to avoid a user defined dialog
title to be equal to a existing dialog title.
Change-Id: I3d21c87de8fe5852f37a18b4751fb4d4428ce6ea
Reviewed-on: https://code.wireshark.org/review/14450
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Try to avoid the following call graph:
ProtoTree::expandAll
...
ProtoTree::expand
...
QTreeView::resizeColumnToContents
QTreeView::resizeColumnToContents calls sizeHintForColumn, which
iterates over a number of items (default 1000). Calling it from
ProtoTree::expand can lead to excessive wheel-spinning.
Add a single-shot timer for resizeColumnToContents. This is similar to
what QTreeView does internally when columns are resized.
Bug: 12228
Change-Id: I7b50c1486b3a25817efae58efbb8c9e961dbdab0
Reviewed-on: https://code.wireshark.org/review/14411
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a check for selected filters in filterEdited() to avoid a
out-of-bounds index into ui->interfaceTree->selectedItems().
Bug: 12241
Bug: 12245
Change-Id: Ie18fc34a17427dd5330a5a617051cbc061555e0c
Reviewed-on: https://code.wireshark.org/review/14404
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add EditorConfig files where we currently have consistent indentation.
This might let us get rid of our editor modeline footers at some point.
Change-Id: I156f8d25cfa0050786eb2186c4b2e6d183c3a9ce
Reviewed-on: https://code.wireshark.org/review/12383
Reviewed-by: João Valverde <j@v6e.pt>
1. Count vendor commands once
2. Fill Event column in case of Command Status/Command Complete
types while displaying command
3. Add missing Status from Connect Complete event
4. Add missing Command Complete events opcodes
Change-Id: Ie5a0e373f92f62fcb890cef7ab54762df3bb8a35
Reviewed-on: https://code.wireshark.org/review/14315
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Add UI support for selecting 80MHz and 160MHz channel bandwidth to
wireless toolbar. 80+80MHz was left out on purpose since will need
updated UI to select the second center frequency. For 80MHz and
160MHz bandwidth the center frequency is calculated from selected
control frequency.
Change-Id: I2551ba396f732b3240d40dfa6ea1cf2617b799d2
Reviewed-on: https://code.wireshark.org/review/13965
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add dumpcap support for configuring 80MHz, 80+80MHz, 160MHz monitor
modes via nl80211.
Change-Id: I2ae8955670c2a9b5051e2223d45ce522459f2c5f
Reviewed-on: https://code.wireshark.org/review/13964
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
We don't do much work to do that - we don't print anything before the
first selected page, and once we're finished generating that page, we
terminate the printing process - so it shouldn't need a progress bar.
(If it needs a progress bar, We Have A Problem, as that slows down the
drawing of the dialog box.)
This should prevent the problem seen in bug 12040.
Bug: 12040
Change-Id: I129191e06fff3e1eb59a9631c7395b9e7f650809
Reviewed-on: https://code.wireshark.org/review/14255
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's *.* on Windows, but just * on UN*X; add a header that provides the
definition, and use it instead of hardwiring *.*.
Call the entry "All Files", that being the conventional name, rather
than "Any File", whilst we're at it.
Change-Id: I7c29324fc5b41e93c150e1ec67f1529f171dc6a3
Reviewed-on: https://code.wireshark.org/review/14243
Reviewed-by: Guy Harris <guy@alum.mit.edu>
On Windows, the pattern that matches all files is *.*; *, by itself,
doesn't work, as I remember. UN*Xes take the pattern a bit more
literally, so if it has a dot in it, it has to match a dot.
Bug: 12203
Change-Id: I11518c29c4ffd73485bad6e49b6dd9cc16bbd0b0
Reviewed-on: https://code.wireshark.org/review/14233
Reviewed-by: Guy Harris <guy@alum.mit.edu>
- Add ShowAsASCIIandControl to keep ShowAsASCII only ASCII printable.
- Enable show selected when ShowAsRAW.
- Use QString::fromLatin1() when ShowAs8859_1.
- Don't replace null with symbol for null when ShowAsUTF8.
Change-Id: I25750247160e33d342fde12e6a998e3198270acf
Reviewed-on: https://code.wireshark.org/review/14220
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add GeometryStateDialog class to handle load and save dialog geometry.
The QDialog class name will be used as window name. For shared
classes the UAT name or the statistics title or abbr will be used.
Change-Id: I5a019598307fb3861518f41e733de834788184d8
Reviewed-on: https://code.wireshark.org/review/14139
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
That way, they initially show up in pcap's order, putting the preferred
interface at the top. If the user wants to sort them by some column,
the user can click on the column in question.
Change-Id: I30ac38519c42ae5317d99fdd0a079b030e6af308
Reviewed-on: https://code.wireshark.org/review/14194
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It doesn't even need to bother checking the argument.
Change-Id: I2cdc9d7da24392ff3fae84e31442530c2e854734
Reviewed-on: https://code.wireshark.org/review/14174
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change the selected interface behavior in the main window and the
capture interfaces dialog to better handle multiple selections. Attempt
to document this at the top of interface_tree.cpp.
Move the default capture filter code from CaptureFilterEdit to
MainWelcome. Add a "conflicting filter" check to CaptureEdit which
updates the placeholder text.
Handle conflicting filters in the main welcome screen and the capture
interfaces dialog. Propagate interface selections and filter updates in
the capture interfaces dialog to the main welcome screen.
Consolidate some of the interface handling code in InterfaceTree and
CaptureInterfacesDialog.
Make sure CaptureInterfacesDialog manages the global capture options by
device name instead numeric index.
Start deprecating prefs.capture_devices_filter and
capture_dev_user_cfilter_find.
Change some member function names so that they're hopefully more clear
and consistent.
Ping-Bug: 11886
Change-Id: I63b06dbae29c2c45ee9252092ad54bdcbacae6e6
Reviewed-on: https://code.wireshark.org/review/14129
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
HT tab stops are set every 8 spaces on UN*X; UN*X tools that treat an HT
character as tabbing to 4-space tab stops, or that even are configurable
but *default* to 4-space tab stops (I'm looking at *you*, Xcode!) are
broken. tab-width: 4, tabstop=4, and tabSize=4 are errors if you ever
expect anybody to look at your file with a UN*X tool, and every text
file will probably be looked at by a UN*X tool at some point, so Don't
Do That.
Adjust indentation to reflect the mode lines.
Change-Id: Icf0831717de10fc615971fa1cf75af2f1ea2d03d
Reviewed-on: https://code.wireshark.org/review/14150
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We should emit textEdited whenever the user changes the text
interactively. Do so when the user clicks the clear button or selects a
recent filter.
We might want to copy this to DisplayFilterEdit.
Change-Id: Icf02fead52947fcef6e7e617b0c49bfc9e1aec65
Reviewed-on: https://code.wireshark.org/review/14144
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fixes a missing "*" marker in the title and this warning when the
capture file comment is modified:
QWidget::setWindowModified: The window title does not contain a '[*]' placeholder
Change-Id: Iea0a63cf8c8f9abd577397c8881f0399d2e798ba
Reviewed-on: https://code.wireshark.org/review/14010
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Undo Qt's "helpful" canonicalization of paths returned by the file
dialogs to use / as the pathname component separator rather than using
the native pathname component separator.
Bug: 12117
Change-Id: I6077191a2204574ca50f53b5424f7f421db33db3
Reviewed-on: https://code.wireshark.org/review/14109
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Highlight the matching tree item and matching packet bytes when
doing a Find Packet. Added cf->search_len to correctly highlight
the matching bytes when doing a regex search.
Bug: 12157
Change-Id: I84fbdb9b43be4355e24aff3cf5f8850f1119e2bf
Reviewed-on: https://code.wireshark.org/review/14086
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
In case the user did not provide a custom name for the interface, display the
OS description in the 'Comment' column as how it is done in GTK UI.
Bug: 12156
Change-Id: If9da58980169df3eaf25f74e7b81676cbc4f6ebd
Reviewed-on: https://code.wireshark.org/review/14095
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
In SyntaxLineEdit make sure we emit textEdited when we complete a
previously used filter. In CaptureInterfacesDialog, connect
captureFilterComboBox::activated to filterEdited. These enusre that we
fill in the capture filter column in CaptureInterfacesDialog.
Change-Id: Ibbf7ab223e37f8f73d8ec0289f8c32692a7e17d4
Reviewed-on: https://code.wireshark.org/review/14081
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
With Wireshark 2.0, some dissector preferences were removed in favor of 'Decode As' functionality.
But the settings saved in the GUI are not loaded in tshark, preventing their use without an explicit call to '-d' option.
Let's load decode_as_entries file by default and have it overridden by the '-d' option if required.
Ping-Bug: 12124
Change-Id: I134a424cb6cf8fc89b7096a659ef1605314a70a2
Reviewed-on: https://code.wireshark.org/review/13956
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Remove mostly obsolete aclocal macros. Make GTK build flags a strict superset
of GLib flags. Use GTK build variables for GTK GUI and GLib elsewhere. Add
dependency flags explicitly instead of using WS_CPPFLAGS.
Some minor improvements and fixes for missing/unnecessary variables (no impact
on our test builds).
Change-Id: I3e1f067a875f79d6516c1fa7af986f17a7a6b671
Reviewed-on: https://code.wireshark.org/review/14005
Reviewed-by: João Valverde <j@v6e.pt>
After switching to QPushButton for buttons in SearchFrame and GoToFrame
the widgets needs a maximum size to reduce the height of the frame.
Change-Id: I504e65add446c4262e9b1e02ff3e41c08d1cfdfd
Reviewed-on: https://code.wireshark.org/review/14019
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Do showProtocolPreferences before removing the variable which
this depends on. The button does not work without at module.
Change-Id: I7d31aa5ab19340a4102523b13de961e799cae5e4
Reviewed-on: https://code.wireshark.org/review/14015
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
- Use QPushButton for buttons and set the "Find" button as default
in SearchFrame.
- Use QPushButton for buttons, added a "Packet:" label, and set
the "Go to packet" button as default in GoToFrame.
- Set Qt::WA_MacSmallSize in OS X for FilterExpressionFrame and
PreferenceEditorFrame.
- Removed QFrame::StyledPanel and QFrame::Raised from ColumnEditorFrame.
- Update ui files to reflect that AccordionFrame is used for
AddressEditorFrame, FilterExpressionFrame and PreferenceEditorFrame.
Change-Id: Icfbfff973535317997109a1020dfe24ba932e098
Reviewed-on: https://code.wireshark.org/review/13995
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add support for using regular expressions in the Search Frame
when searching in packet list, packet details and packet bytes.
This search is in many cases faster than plain string search.
Change-Id: I2d8a709046f90d7b278fb39547fc4e2e420623bc
Reviewed-on: https://code.wireshark.org/review/13981
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The argument to the resize method for QByteArray is an int, not a
size_t.
Change-Id: Id30bc03daec6d6ead8669794b5cb0247718be66b
Reviewed-on: https://code.wireshark.org/review/13977
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add an option to decode the packet bytes from base64 or zlib compressed.
Also add configurable start byte and end byte to make it possible to
decode a subset of bytes. It's also possible to select a range in ASCII
view and select "Show selected" from the context menu to make a subset.
In ASCII view a null terminator is replaced by UTF8 symbol for NULL,
and a CR is replaced by UTF8 symbol for carriage return. This is done
to make it possible to "Show selected" from the context menu.
Change-Id: Ie03c9912c304c121af6ca9e998a6e8445b5382c5
Reviewed-on: https://code.wireshark.org/review/13958
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
'const gpointer' is the same as 'void *const'. Replace with gconstpointer
where straightforward (assuming that was the intent) and use gpointer everywhere
else for clarity (that does not change *API* constness contract; it just means
a variable is not declared immutable inside the called funtion).
Change-Id: Iad2ef13205bfb4ff0056b2bce056353b58942267
Reviewed-on: https://code.wireshark.org/review/13945
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add settings to the QLineEdit context menu to use textual or regular
expression search. Use this in Follow Stream and Show Packet Bytes.
Change-Id: I3a9f5a923f616629aa40a334921871f98b518f30
Reviewed-on: https://code.wireshark.org/review/13942
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
