The cell identifier list parameter is mandatory. Document it as
such, and tweak code which treated it like an optional parameter.
No functional change. The existing code already asserts that
a non-NULL value is passed for this parameter.
Change-Id: I3716f9d5b210e0a7e6f45c9fe3fc34024e5234ad
Related: OS#3021
There was gsm0480_l3hdr_push() declared in a header file, but
not exposed in 'libosmogsm.map'. Furthermore, for some reason
it was a part of GSM 04.80 API, what is not actually correct.
Let's rename this symbol, and properly expose it as a part of
the GSM 04.08 API. Also, let's introduce an auxiliary wrapper
for messages, where the transaction identifier is required
(see GSM 04.07, section 11.2.3.1.2).
Change-Id: I8a045efe8335d83fcbe8d43eb180972e3b1d9dda
I was contacted by the (previously unknown) author who provided
the new location of the original code.
Change-Id: I2dabab20ad018ce473817986bdb250131c010bf1
In the previous commit we deprecated ipa_ccm_idtag_parse() but
also removed ipa_ccm_idtag_parse_off(), for which I couldn't find
any users. However, legacy openbsc.git still uses this function,
so let's re-introiduce it in its original form.
Change-Id: Ibfe53b04340eb355c8bfb8453a2af1522a4b6baf
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As we're moving this to a common/shared library now, we need to use
the osmo_ namespace prefix for symbol names, struct/type names and
constants.
Change-Id: Ie36729996abd30b84d1c30a09f62ebc6a9794950
This imports the code from osmo-msc 6afef893e17bce67e4d4119acd34d480ed03ba77
with minimal changes to make it compile. Symbol renaming to osmo_
prefix is done separately in a follow-up patch to have a as-clean-as-possible
import first.
Change-Id: I9bc38102318da02d1fe46ef516df3cfd6bf8e3da
Contrary to the existing gsm0480_create_ussd_resp(), the new function
only generates the value part of the FACILITY IE, and not the IE
Tag/Length or the 04.08 L3 header. This is needed in the context of
GSUP-encapsulated USSD, as here we don't work with L3 messages, but
only pass on the FACILITY IE value.
Change-Id: Ide240279240322f643e142229eb7829f538c6314
enum gsm0808_permitted_speech does not have any value strings. Lets
add value strings to make debugging easier.
Change-Id: I5b5612a5df2758b0137a34c17f7c8c2b3f07c806
The conv_gen.py utility was tested against both Python 2 and 3,
so there is no need to enforce Python 2. Also, having:
#!/usr/local/bin/python{2|3}
is a bad idea, because Python may be installed in a different location.
Change-Id: I6007d481047b584db13d6eda70fb99f11f9ddaa1
A loooong time ago, we introduced osmo_panic() as a wrapper around
abort(). The advantage is, that this wrapper can be overridden, and
that it will also work in embedded (bare iron) targets, where the
abort simply translates to an infinite loop.
Change-Id: I5a70eb65952cbc329bf96eacb428b07a9da32433
Add:
gsm0808_create_handover_detect()
gsm0808_create_handover_complete()
gsm0808_create_handover_failure()
To existing structs gsm0808_old_bss_to_new_bss_info and
gsm0808_handover_required, add a final 'more_items' flag that makes future
extensions API and ABI compatible.
Fix the msgb string for Handover Request Ack.
Extend some API doc comments.
Related: OS#2283 (inter-BSC Handover, BSC side, MT)
Change-Id: I03ee7ce840ecfa0b6a33358e7385528aabd4873f
In Change-Id I1cee271fed0284a134ffed103c0d4bebbcfde2a8 we added support
for a new session state IE, but we didn't add any value_string array
for string conversion of it. Let's fix this.
Change-Id: I3d9f087786dc37c42498fa9a2be07483ec93ba7b
This function can be used to resolve the error message type for
a given message type. Can be used by generic error handlers that
work for any incoming message type.
Change-Id: Ic637bec53dd7fe3ec83da99b49b4eae34d5602b2
This function can be used when there is only a part of GSM 04.80
message available - Facility IE, e.g. when a message is carried
over GSUP/MAP. Let's expose it.
Refactoring includes the following:
- adding the 'gsm0480_' prefix;
- correcting inverted return value;
- cosmetic code style changes.
Change-Id: I623c39ffbe6cdee65eade8435a2faa04d0da193e
In some cases, there is no need to parse the whole message,
e.g. during the conversion from DTAP to GSUP/MAP. This
function can be used to extract given IE from a message.
Change-Id: I3989d061903352473305f80712f1a1560d05df3d
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
According to the 3GPP TS 04.80, table 2.5 'Release complete', a
RELEASE_COMPLETE message may containg optional FACILITY element.
Meanwhile, the 0xff byte is used to indicate that there is no
decoded message (legacy field). Let's avoid overwriting of
a decoded message.
Change-Id: I0c85292222749a48ca0c4b2e93f4fa2d61468c18
The idea is to be able to add a gsm0808_cell_id to a gsm0808_cell_id_list2:
first convert it to a list, then re-use gsm0808_cell_id_list_add(). It will be
used by osmo-bsc to manage neighbor-BSS cell identifiers from VTY.
Change-Id: Ibf746ac60b1b1e920baf494b396658a5ceabd788
For some strange reason, the osmo_mncc_name() inline function
was not in the mncc.h header, but in the mncc.c file. Let's fix that.
Change-Id: I2c3666510c981dffa4ba25bed517fd7ebd1250f5
Fixes following AddressSanitizer report during gea_test run with gcc
8.1.0:
==8899==ERROR: AddressSanitizer: dynamic-stack-buffer-overflow on address 0x7ffc5f1719bb at pc 0x7fe574adc5fe bp 0x7ffc5f171460 sp 0x7ffc5f171450
WRITE of size 1 at 0x7ffc5f1719bb thread T0
#0 0x7fe574adc5fd in osmo_store64be_ext ../../include/osmocom/core/bit64gen.h:75
#1 0x7fe574adc649 in osmo_store64be ../../include/osmocom/core/bit64gen.h:104
#2 0x7fe574ade936 in _kasumi_kgcore libosmocore/src/gsm/kasumi.c:186
#3 0x7fe574ae2532 in gea4 libosmocore/src/gsm/gea.c:44
#4 0x7fe574ae266c in gea3 libosmocore/src/gsm/gea.c:60
#5 0x7fe574a9b616 in gprs_cipher_run libosmocore/src/gsm/gprs_cipher_core.c:95
#6 0x56422d3fb2ee in test_gea libosmocore/tests/gea/gea_test.c:29
#7 0x56422d3fb506 in main libosmocore/tests/gea/gea_test.c:49
#8 0x7fe5730f406a in __libc_start_main (/usr/lib/libc.so.6+0x2306a)
#9 0x56422d3fadf9 in _start (libosmocore/tests/gea/.libs/lt-gea_test+0x1df9)
The kasumi_test is updated to calculate the entire array of bits
according to expected result. Before this commit it worked by writing
the entire last 64bit block, and addressSanitizer cannot catch it
because the allocated buffer is 64bit aligned too.
Change-Id: I7b2a0224a3b5527d5a3ad7e17efc73081b63eac1
In Change-Id: I8c2c103cdc7f9a45d7b2080c572f559fc3db58e4 we introduced
a check to enforce contention resolution always being used in
MS-originated LAPDm establishment on the main DCCH / SAPI0. This is
only required after RACH request (IMM.ASS.) and not after a normal
assignment command which was sent already via a dedicated channel.
Hence, we cannot enforce a strict requirement for contention resolution
in those cases.
We *could* use the RSL Channel Activation type as a constraint on
whether or not to enforce contention-resoluiton-only LAPDm
establishment, but this is out of the scope of the LAPDm code but would
have to be done inside OsmoBTS.
Related: OS#3252
Change-Id: Id903492ee90809fe98defcf4abc0419b8150069f
The RSL_IE_MS_POWER / RSL_IE_TIMING_ADVANCE is how we communicate
the SACCH L1 header values on the MS side between LAPDm and L3 (which
is a non-standard use of RSL).
However, those IEs only maek sense on the SACCH, where we have B4 frame
format and where we actually have a L1 header containing related
information. Let's make sure to skip those IEs on regular RLL UNIT DATA
INDICATION happening on other channel types.
Change-Id: I6f13e02192531479287f71de674d17ca2ceabdc6
Closes: OS#3249
This is a purely cosmetic clean-up to use the msgb_tv_push() API
to pre-pend a Tag-Value IE to a msgb, rather than the existing
open-coding approach.
Change-Id: I19bbfa1e327a617685ed11d4182e533df33215cb
Add:
- gsm0808_current_channel_type_1()
- gsm0808_permitted_speech()
- gsm0808_chosen_channel()
- gsm0808_channel_type_name()
gsm0808_permitted_speech() is moved from osmo-bsc's bssap_speech_from_lchan();
gsm0808_chosen_channel() is moved from osmo-bsc's lchan_to_chosen_channel();
Rationale: will be re-used by inter-BSC handover, makes sense to keep with the
other gsm0808 utils.
Related: OS#2283 (inter-BSC handover, BSC side)
Change-Id: I8a3cc5d4548e9a78d945d54c69ccced251edcec9
* MO SAPI0 establishment *must always* have L3 payload for contention
resolution
* SAPI3 establishment *must never* use contention resolution
* MT establish must never use contention resolution
Change-Id: I8c2c103cdc7f9a45d7b2080c572f559fc3db58e4
Closes: OS#2370
It seems that during all those years it has never been noted that
the back-pointer from the lapdm_entity to the lapdm_channel was
never initialized. Let's fix that.
Change-Id: Iaca66cd6a2c9f315561e365b51163927868fc346
gnutls_global_init must be called at least once for
gnutls < 3.3.0. It doesn't hurt calling it twice, except
a reference counter is increased.
gnutls >= 3.3.0 will call it automatic.
Fixes: OS#2986
Change-Id: I241b6ae5aa8df13dd78f04658cf0953e9561c9e2
3GPP TS 48.058 has a very clear definition of which messages are
"transparent" and hence have the T-bit == 1. This is *not* just
all RLL messages, but basically only RLL_DATA.{ind,req} and
RLL_UNITDATA.{ind,req}. All other messages are non-transparent.
Change-Id: I9f83654af189d818563d799bf623325b7fee8e70
Closes: OS#3188
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
According to the GSM TS 04.07, section 11.2.3.1.1 "Protocol
discriminator", bits 1 to 4 of the first octet of a standard
L3 message contain the protocol discriminator IE.
Meanwhile, the GSM48_PDISC_USSD represents value 0x11, i.e.
0b10001, that requires 5 bits, and moreover it is not
documented anywhere. Let's drop it.
Change-Id: Ic4eb8a6db4ff1dfd535bd0c84e7acf1908422f64
don't blindly trust the tag-length value in an IPA CCM ID GET
message. This could result in a remotely-triggered integer underflow.
Change-Id: I4723361e1094b358310541a7dc4c5c921c778a15
Clarify semantics and micro-optimise for the case of single Cell Identifer IEs.
Test in gsm0808_test.c
So far we have gsm0808_enc_cell_id_list2(), but there also exist instances of
single Cell Identifiers (3GPP TS 48.008 3.2.2.17).
It is possible to decode the same using the cell identifier list API, but this
forces the caller to also keep a full struct gsm0808_cell_id_list2 with all its
127 entries around.
E.g. for handover, there are two Cell Identifiers (Serving and Target); I'd
need two full cell id lists for each, and these would be dynamically allocated
for each handover operation, whether it uses them or not.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I9f9c528965775698ab62ac386af0516192c4b0cc
Allow passing multiple struct tlv_parsed in an array, to allow parsing as many
repeated IEs as are expected by the caller.
From tlv_parse(), call tlv_parse2() with dec_multiple = 1 to yield the previous
behavior. tlv_parse() remains valid API.
An example of multiple IEs is the BSSMAP Handover Request, containing Cell
Identifier (Serving) and Cell Identifier (Target), both defined by 3GPP TS
48.008 3.2.2.17 with identical IE tags; both are mandatory.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: Id04008eaf0a1cafdbdc11b7efc556e3035b1c84d
This will be used by the upcoming neighbor_ident API in osmo-bsc, where the vty
interface allows composing neihbor BSS cell identifier lists, and we want to
allow adding individual items from individual user commands.
It will also be useful to accumulate cell identifiers in case a subscriber sees
multiple alternative cells from a neighboring BSS, and we want to pass these on
to the MSC in a Handover Required.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I5781f5fa5339c92ab2e2620489b002829d206925
This will be used by cell idenitifier list code, like upcoming neighbor_ident
VTY in osmo-bsc and regression tests.
Change-Id: Iebc5cdf61b697b1603900993fc265af3eca0cedf
There seems to be quite some confusion / overlap between enum
gsm48_reject_value, gsm48_gsm_cause and gsm48_gmm_cause. I tried to go with
gsm48_gsm_cause_names[], but e.g. GSM48_REJECT_CONGESTION is not represented.
Instead of attempting to mix/merge those enums, provide a separate value string
array for enum gsm48_reject_value.
This will be used by osmo-msc's libvlr (refactoring of FSM result handling),
I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1.
Change-Id: I6661f139e68a498fb1bef10c266c2f064b72774a
fix for some spelling issues found by lintian
Signed-off-by: Thorsten Alteholz <osmocom@alteholz.de>
Change-Id: I69976ecae6939d9ff51bfe4ce7374890c6563b82
If either an INVOKE, either a RETURN_RESULT component has the
data with incorrect length (see Annex A, 3GPP TS 04.80), the
whole message is probably incorrect.
Let's drop such messages instead of silent truncation.
Change-Id: I2a169b0b84aa26ea2521edd55ff005c27ae6d808
As it was already documented before, the 'ss_request' struct has
a rudiment of deprecated 'ussd_request' struct - the 'ussd_text'
field. It represents the data either of an INVOKE component,
either of a RETURN_RESULT component, encoded as ASCII in case
if DCS is 0x0f (i.e. decoded by the code itself), otherwise
raw bytes 'as is'.
Previously, there was no possibility to distinguish between
ASCII and raw bytes with different DCS. Moreover, the payload
decoding is not desired in some cases.
Let's introduce the new fields, which will carry the raw
unmodified payload, its length and DCS (Data Coding Scheme).
Change-Id: Ia193d175021e145bb3b131290231f307dbefc64a
libosmocore has no value strings for BSSMAP cause codes yet.
- Add value strings for BSSMAP cause codes and a function
to retrieve them
Change-Id: I313dd8d7b06374e1e35ddc18b7a42562d9e25d45
Related: OS#1609
Use non-deprecated API to decode encode in gsm0808_enc_cell_id_list2().
Adjust gsm0808_test.c to now expect the correct results instead of previous
failure.
Change-Id: I1ce78883995e0d484368046b69db5afb2b4adc97
The speech codec defaults are not correct. The defaults recommended
in 3GPP TS 28.062, Table 7.11.3.1.3-2 are limited by 3GPP TS 48.008,
Section 3.2.2.103. Some defaults are actually reserved for future
use. Also the endianess of the 16 bit values is reversed.
- correct values so that they match the specification
- transmit bytes in the correct endianess
Change-Id: I6c3a34d39a375d71c4128fd38f06629e8b98b100
This is a more modern way of printing the Abis OML Formatted Object
Header, without assuming that it would be used in a log statement
or prescribing the log level to be used.
Change-Id: I9b2c2afec28882b817d104d5b062651ade7aadd8
Since commit bf383a1d83 tlv_parse()
will return the first occurrence of a repeated IE. Add a test to
verify this behaviour. This test passes with the current code and
fails if bf383a1d83 is reverted.
While here, fix lies in documentation about the return value of tlv_parse()
and fix a typo in another comment.
Change-Id: I041f38548c5e4236920991d6c681c1c1e04de9ca
Related: OS#2904
The implementation was entirely broken, reading data from wrong offsets
and always writing to the first element of the decoded list.
Also, add a new test for this function which found the problems.
Change-Id: If0fafbc7171da2a3044bfa9a167208a1afa1c07b
Related: OS#2847
Depends: Ife4e485e2b86c6f3321c9700611700115ad247b2
Cell ID lists with CI were misparsed because parse_cell_id_ci_list()
failed to report the amount of consumed bytes to its caller.
Also add a regression test which uncovered the bug.
Change-Id: Ife4e485e2b86c6f3321c9700611700115ad247b2
Depends: If6b941720de33dca66b6b1aa2cb95a3275708b7f
Related: OS#2847
This makes gsm0808_dec_cell_id_list() properly decode 3-digit MNCs.
Add a test which encodes/decodes a LAI_AND_LAC list with 3-digit MNCs.
Change-Id: If6b941720de33dca66b6b1aa2cb95a3275708b7f
Related: OS#2847
The cell ID list decoder merged in 11a4d9dd91
has a bug which was introduced part-way through the review process in
gerrit at https://gerrit.osmocom.org/#/c/6509/
When Neels suggested "why not just {...}id_list[MAXLEN] once?" I changed
the cell identifier list from a union of arrays to an array of unions.
After this change, elements smaller than the largest type in the union
were not laid out consecutively in memory anymore. E.g. uint16_t lac
values now occur at offsets of sizeof(id_list[0]) instead of offsets
of sizeof(uint16_t).
The problem is that I forgot to adjust the decoder accordingly, so the
decoder writes to the wrong offsets and returns cell identifier lists
which appear to contain uninitialized values when read back by API
consumers.
I found this problem while adding new regression tests to libosmocore to
test encoding and decoding. This commit adds one such tests for LAC list
decoding, which failed due to the above bug. I plan to write more tests,
however because this first test already uncovered a severe issue I chose
to submit a fix now and work on additional tests in later commits.
Change-Id: Ie1a5a9d858226be578cf11a03cf996d509bd51fb
Related: OS#2847
Global and LAI+LAC cell IDs were being misparsed due to an off-by-one.
This code was incorrectly converted from osmo-bsc, where an additional
offset of one byte was needed to skip the cell identifier field.
In libosmocore, these parsing routines receive a buffer pointer which
is already positioned at the start of the cell identifier field.
Change-Id: I7f3e8ace26176e9cbfe2542961d2a95662aa4d97
Related: OS#2847
Introduce gsm0808_dec_cell_id_list2() with supports additional types of
cell identifier lists. The new parsing routines are based on similar
routines used by the paging code in osmo-bsc's osmo_bsc_bssap.c.
Likewise, introduce gsm0808_enc_cell_id_list2() with support for the
same additional types of cell identifier lists.
The old API using struct gsm0808_cell_id_list is deprecated.
The previous definition was insufficient because it assumed that all
decoded cell ID types could be represented with a single uint16_t.
It was declared in a GSM protocol header (gsm/protocol/gsm_08_08.h)
despite being a host-side representation of data in an IE.
The only user I am aware of is in osmo-msc, where this struct is used
for one local variable. osmo-msc releases >= 1.1.0 make use of this API.
While here, fix a small bug in a test:
test_gsm0808_enc_dec_cell_id_list_bss() set the cell ID type to 'LAC'
but obviously wants to use type 'BSS'.
Change-Id: Ib7e754f538df0c83298a3c958b4e15a32fcb8abb
Related: OS#2847
In osmo_mnc_from_str() do not try to return some values even if the validation
fails; hence don't try to decode a NULL pointer. That whole idea was half-baked
and a can of worms to begin with.
Change-Id: Ibaaa128ac60b941a015a31134eb52aef56bc6e22
osmo-bsc and osmo-bts share enums and value strings to describe
feature data that is exchanged via OML (manufacturer id) on startup.
Also the functions to set and get the respecitive bits in the feature
bitvectors are in osmo-bsc and osmo-bts. This is a code duplication
and should be resolved.
- add enum osmo_bts_features (replaces enum gsm_bts_features)
- add osmo_bts_features_descs (replaces gsm_bts_features_descs)
- add osmo_bts_set_feature (replaces gsm_btsmodel_set_feature)
- add osmo_bts_has_feature (replaces gsm_btsmodel_has_feature)
Change-Id: Id0c35aef11aa49aa40abe7deef1f9dbd12210776
osmo_mnc_from_str() preserves leading zeros in the string and is useful for
VTY config parsing (osmo-bsc, osmo-msc, osmo-sgsn, osmo-pcu).
osmo_{plmn,mnc}_cmp() takes care of the slight intricacy of ignoring the 3-digit flag
if the MNC is anyway >99. Will be used by osmo-sgsn.git and osmo-bsc.git. (All
current users just care about identical MNC, but a proper cmp doesn't hurt.)
Change-Id: Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6
Enable representing three-digit MNC with leading zeros. The MNCs 23 and 023 are
actually different; so far we treated both as 23. Re-encode an incoming BCD or
string of 023 as it were, i.e. not dropping the leading zero as 23.
Break ABI compatibility by changing the size and ordering of structs
gprs_ra_id, osmo_plmn_id, osmo_cell_global_id, ... by adding an mnc_3_digits
flag.
Change ordering in gprs_ra_id because the canonical oder is {Mobile Country
Code, Mobile Network Code}, so have the mcc member first.
ABI compatibility cannot be maintained for struct gprs_ra_id, since it is a
direct member of structs bssgp_bvc_ctx and bssgp_paging_info, and even just
adding a flag to the end would cause ABI changes of those structs. Similarly,
osmo_plmn_id is a direct member of osmo_location_area_id, and so forth.
Add new API to set and read this additional flag to preserve leading zeros:
- osmo_plmn_to_bcd(), osmo_plmn_from_bcd() after
gsm48_mcc_mnc_to_bcd() and gsm48_mcc_mnc_from_bcd().
- gsm48_decode_lai2(), gsm48_generate_lai2() after
gsm48_decode_lai(), gsm48_generate_lai().
- gsm0808_create_layer3_2() after gsm0808_create_layer3() and gsm0808_create_layer3_aoip().
- various osmo_*_name() functions in gsm23003.h (osmo_rai_name() still in
gsm48.h close to struct gprs_ra_id definition). The amount and duplication of
these may seem a bit overboard, but IMO they do make sense in this way.
Though most code will soon see patches unifying the data structures used, in
some cases (vty, ctrl) they are required singled out. Without these
functions, the formatting ("%0*u", mnc_3_digits ? 3 : 2, mnc) would be
duplicated all over our diverse repositories.
In various log output, include the leading MNC zeros.
Mark one TODO in card_fs_sim.c, I am not sure how to communicate a leading zero
to/from a SIM card FS. The focus here is on the core network / BSS.
To indicate ABI incompatibility, bump libosmogsm and libosmogb LIBVERSIONs;
adjust debian files accordingly.
Implementation choices:
- The default behavior upon zero-initialization will be the mnc_3_digits flag
set to false, which yields exactly the previous behavior.
- I decided against packing the mnc with the mnc_3_digits field into a
sub-struct because it would immediately break all builds of dependent
projects: it would require immediate merging of numerous patches in other
repositories, and it would make compiling older code against a newer
libosmocore unneccessarily hard.
Change-Id: Id2240f7f518494c9df6c8bda52c0d5092f90f221
This breaks all existing / older osmocom-bb builds, and hence
cannot be accpeted. See also https://gerrit.osmocom.org/#/c/6679
Related: OS#2985
This reverts commit 3c38e60cd5.
Change-Id: Icfc52ca4e5cbe3a444d98037d27fa101e3614e06
Add generic function which allows caller to set Mobile Identity
explicitly. This allows to use IMEI or IMEISV for example. Make
gsm48_generate_mid_from_imsi() into wrapper around new function.
Change-Id: Id79be7abfff75ecd0d248bbeed93e605abeec9b3
Most GSM related specifications require the receiver to use the
*first* occurrence of repeated IEs. The Osmocom TLV parser so
far did the opposite: It reported only the *last* occurrence in
case of repeated IEs. Let's change our implementation to be
more in-line with relevant specs, such as 3GPP TS 24.008 8.6.3.
Change-Id: Icde09e075f68c842a7a96cf7160c8e44b77cf82d
* match return type of osmo_gsup_encode() with osmo_gsup_decode() to allow
propagating error to caller
* check return value of osmo_gsup_encode() in GSUP test
* return errors instead of braking app with aseert
Change-Id: Idaa1deecb6d9e15329bd51867b4f6a03357461f0
Related: OS#2864
Some times I *really* regret ever having merged OSMO_VALUE_STRING,
as it generates completely unusable and way too long strings :(
Change-Id: I8de7c01f9ea1d66c384e57449c4140186f5ce6c5
As MNCC is rather hard to debug (wireshark cannot trace UNIX domain
sockets), let's add our own decoder that we can use from related
debug log statements in the respective programs.
Change-Id: I216aaf70868ba5f3860a60c4b2442957531a3011
According to GSM 04.80 section 2.5 "Release complete", a message
of the mentioned type may contain optional IEs, such as Cause
and Facility. Let's parse them.
Change-Id: Ib8fc1f6bae472b0b264b6158f372b6cce255b222
Some SS messages (e.g. RELEASE COMPLETE) may contai multiple
IEs (Information Elements). Let's parse them all.
Change-Id: I20cc59c25fdbda176bcf76437174cda829518d60
According to GSM 04.08, 4.4.2 "ASN.1 data types":
the USSD-DataCodingScheme shall indicate use of
the default alphabet using the 0x0F value.
Previously, the UnstructuredSS Request messages with not
default alphabet were not being handled. Let's fix this.
Change-Id: I73d602f6f20b0afe7600d16bbd432069ae7be788
According to the GSM 04.80 (version 5.0.0) specification Annex A
"Expanded ASN.1 Module "SS-Protocol", the maximum size of a USSD
OCTET STRING is 160 bytes.
Thus according to ETSI TS 123 038 (version 10.0.0) specification
6.1.2.3 "USSD packing of 7 bit characters", in 160 octets, it's
possible to pack (160 * 8) / 7 = 182.8, that is 182 characters.
The remaining 6 bits are set to zero.
This change defines both mentioned values:
- GSM0480_USSD_OCTET_STRING_LEN 160
- GSM0480_USSD_7BIT_STRING_LEN 182
keeping the old MAX_LEN_USSD_STRING 'as is' due to compatibility
reasons. Now the new value is used for ss_request structure, while
old one is still used for deprecated ussd_request structure.
Change-Id: I6dead74f9ecea079752ff2400cdaf7c30187784e
According to GSM 04.80 Section 2.5 'Release complete' Table 2.5,
the 'RELEASE COMPLETE' message payload is optional, so let's drop
the length check in gsm0480_decode_ss_request() for this type.
Change-Id: I63b7f8ce403169a9dbdbdb031db16693de2196d6
It's not very useful to get just the raw pointer address in case of
lapd_datalink receive error. Log it's state in addition.
Change-Id: Ie8c5df262312f886f509113f2707e36811df3bd5
If the length provided in the patcket exceeds the buffer length,
tlv_parse() returns -2 but leaves tlv.val and tlv.len initializd.
Many callers of tlv_parse() do not check its return value, but
rely on TLVP_PRESENT() to see if a particular TLV was parsed
successfully. By clearing tlv.val and tlv.len we make it less
likely that those callers will use an overlong TLV length value.
Change-Id: I4dda6938e1650b4bcaac45809a4763f86f5a9794
Add gsm48_encode_ra() which takes appropriate struct as [out] parameter
instead of generic buffer. Using uint8_t buffer instead of proper struct
type prooved to be error-prone - see Coverity CID57877, CID57876.
Old gsm48_construct_ra() is made into tiny wrapper around new
function. The test output is adjusted because of the change in function
return value which was constant and hence ignored anyway.
Related: OS#1640
Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
To send a Ciphering Mode Command, we may need to derive a Kc from UMTS AKA
tokens. gsm_milenage() derives Kc from 3G tokens, but also derives an SRES.
For SRES, it requires an OPC, which may need to be derived from OP first. All
we need is a Kc, so we could feed a zero OPC ... but to simplify the function
call for cases where just a Kc is required, separate the c3 function out from
gsm_milenage(), as osmo_auth_c3(). Obviously call osmo_auth_c3() from
gsm_milenage() (meaning that osmo-hlr's 55.205 derived auc tests still cover
exactly that implementation).
Prepares: If04e405426c55a81341747a9b450a69188525d5c (osmo-msc)
Related: OS#2745
Change-Id: I85a1d6ae95ad9e5ce9524ef7fc06414848afc2aa
The Cause IE in the 08.08 CIPHER MODE REJECT is a normal TLV IE,
and not just a value. Let's make sure we encode the cause value
properly.
Change-Id: I4f5b231edf6dcb0a9c2bbafb2a59f301f3b2402b
Closes: OS#2766
Some Abis/RSL messages such as "Release Indication" contained 3 extra
bytes from an L3 Information header which should not be there according
to specs in GSM 08.58 (section 8.3 "Radio link layer management
messages"). Other RSL messages were affected by the same issue, except
for "Establish Indication", which had already a workaround in
send_rslms_dlsap.
This commit fixes the issue in a generic way, removes the "Establish
Indication" and fixes the test accounting for the bug, as it otherwise
fails after applying the changes.
Fixes: OS#1635, OS#2336
Change-Id: Ibb116214e8b1798d65a8b0917150496a3c14f344
"man getrandom" states sys/random.h is required.
Fixes warning below:
warning: implicit declaration of function ‘getrandom’; did you mean ‘srandom’? [-Wimplicit-function-declaration]
rc = getrandom(out, len, GRND_NONBLOCK);
^~~~~~~~~
Change-Id: I2e73fd018e887893dc5527d6d73644d627eb963a
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
On systems with GNU/Linux kernel older than 3.17 (Debian 8 "jessie" for
example) the osmo_get_rand_id() would always return failure due to
missing getrandom() syscall.
To support such systems, let's add fallback code which uses GnuTLS
library. It can be disabled explicitly via '--disable-gnutls' option at
compile-time, otherwise ./configure will fail if both getrandom() and
GnuTLS are not available. When building with '--enable-embedded' the
fallback is disabled automatically.
Related: OS#1694
Change-Id: Ic77866ce65acf524b768882c751a4f9c0635740b
According to
https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags
the libraries supposed to be added to *_LDADD or *_LIBADD
while *_LDFLAGS should contain additional libtool linking
flags. Previously we used both. Let's unify this and move all the
libraries into proper automake variable. While at it - also add
libosmocore.la for tests to LDADD since all the tests link against it
anyway.
Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
Previously it would crash on NULL input. Let's handle it gracefully
instead. Corresponding test case is also added.
Change-Id: I587153e49d1c92128fac3ae5c124adba9592378e
No callers that would pass NULL exist, but let's check against NULL from the
start.
Fixup for recent change I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522.
Change-Id: I111fbf29228929f2cd6ffa06bcb1f69da223224e
Add osmo_sub_auth_type_names[] and osmo_sub_auth_type_name().
Also add a hint to enum osmo_auth_algo's API doc that osmo_auth_alg_name()
already exists (it is defined further below).
Change-Id: I652a929bcd11c694d86812fb03d0a1cbd985efda
The function is a wrapper on top of getrandom() (if available via glibc) or
corresponding syscall. If neither is available than failure is always
returned.
It's intended to generate small random data good enough for session
identifiers and keys. To generate long-term cryptographic keys it's
better to use special crypto libraries (like GnuTLS for example)
instead.
As an example it's used to replace old insecure random number generator
in osmo-auc-gen utility.
Change-Id: I0241b814ea4c4ce1458f7ad76e31d390383c2048
Related: OS#1694
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
libosmocore offers the ipa API as general IPA Multiplex, which is e.g. used for
GSUP in osmo-msc. Looking at talloc reports, it is confusing to see "Abis/IP"
as msgb comment, because osmo-msc does not have an Abis interface.
Rename to "IPA Multiplex" as a more general description.
Change-Id: I3714dd21707bec0c4bcd0871e6ee8ff32d56b125
lapd_est_req() function could be called on uninitialized lapd link
(before lapd_dl_init() and after lapd_dl_exit() functions) due to
invalid usage on higher levels.
In order to prevent using uninitialized lapd link, we should set
LAPD_STATE_NULL state for lapd_datalink in lapd_dl_exit() function.
So all messages for lapd_datalink in null state will be unhandled by
lapd_recv_dlsap() function and lapd_est_req() function will not be
called before lapd_dl_init() function where lapd link state is changed
to idle.
#0 0x00007f46ecd99aa5 in lapd_est_req (dp=<optimized out>, lctx=0x7f46ed80b8b8) at
lapd_core.c:1769
#1 0x00007f46ecd9dda8 in rslms_rx_rll_est_req (msg=msg@entry=0x7f46eeab4940,
dl=dl@entry=0x7f46ed80b888) at lapdm.c:845
#2 0x00007f46ecd9fc03 in rslms_rx_rll (lc=0x7f46ed80b398, msg=0x7f46eeab4940) at
lapdm.c:1157
#3 lapdm_rslms_recvmsg (msg=0x7f46eeab4940, lc=0x7f46ed80b398) at lapdm.c:1223
#4 0x00007f46ed63773d in rsl_rx_rll (msg=<optimized out>, trx=<optimized out>) at
rsl.c:2178
#5 down_rsl (trx=<optimized out>, msg=<optimized out>) at rsl.c:2541
#6 0x00007f46ed641529 in sign_link_cb (msg=<optimized out>) at abis.c:169
#7 0x00007f46ec54b111 in ipaccess_bts_read_cb (link=0x7f46eeab4940, msg=0x0) at
input/ipaccess.c:807
#8 0x00007f46ec548a8e in ipa_client_read (link=0x7f46ee26ae30) at input/ipa.c:74
#9 ipa_client_fd_cb (ofd=<optimized out>, what=1) at input/ipa.c:137
#10 0x00007f46ecfc726f in osmo_fd_disp_fds (_eset=0x7ffe7a9fcd20, _wset=0x7ffe7a9fcca0,
_rset=0x7ffe7a9fcc20) at select.c:167
#11 osmo_select_main (polling=polling@entry=0) at select.c:207
#12 0x00007f46ed63fc25 in bts_main (argc=5, argv=<optimized out>) at main.c:359
#13 0x00007f46ebd76f45 in __libc_start_main (main=0x7f46ed61b120 <main>, argc=5,
argv=0x7ffe7a9fcf18, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>,
#14 0x00007f46ed61b14e in _start ()
Related: OS#1982
Change-Id: I306dad9b78e3becaef14c5305ec25c312feefe3c
When doing UMTS AKA with AUTS, it can be interesting to know the SQN.MS that
was encoded in the AUTS. The only way to know this is to provide it as a
separate out-parameter from milenage_gen_vec_auts(), because the SQN.MS from
AUTS stored in umts.sqn is immediately modified non-trivially by
milenage_gen_vec(). Add sqn_ms to struct osmo_sub_auth_data to retain SQN.MS
even after a vector was generated.
Use this to print out SQN.MS for 'osmo-auc-gen -3 -A'.
Adjust test suite expectations.
Related: OS#2464
Change-Id: I9fc05bbf169d06716f40b995154fd42a3f91bef3
From GSM 03.40: "The Service-Centre-Time-Stamp, and any other times
coded in this format that are defined in this specification,
represent the time local to the sending entity."
Change-Id: I4efdb1eaae43aced33961b64d4f14b0040321c10
We only implemented OPC generation from OP in the AUTS case, but not
in the case of normal authentication vector generation. This never
really was visible so far due to the fact that we use OPC at sysmocom,
and never the shared OP value.
Change-Id: Id3fa038dfc2ff1ba63616fa5e8eab0520481ff26
Convert a given frame number into a printable string that displays
the sub components of the frame number.
Change-Id: I8015d2ded3940b01b35df7b72fc35c70c25e9926
These fields can be in the ISD and the PDP Context inofmration. Store
pointers to this IE in both cases. It needs to be used by the SGSN
when opening a PDP context.
Change-Id: Iedc7c02adcf77ca5c9545119e19c968dfbbb3e6b
Fixes following warning message:
abis_nm.c:101:2: warning: implicit conversion from enumeration type 'enum abis_nm_msgtype_bs11' to different enumeration type 'enum abis_nm_msgtype' [-Wenum-conversion]
Change-Id: Icb0ed423febf1ceb6626e256d32011b4118fc527
gsm0411_utils.c:102:2: warning: #warning find a portable way to obtain timezone offset [-Wcpp]
#warning find a portable way to obtain timezone offset
gsm0411_utils.c: In function 'gsm338_get_sms_alphabet':
gsm0411_utils.c:260:4: warning: large integer implicitly truncated to unsigned type [-Woverflow]
return 0xffffffff;
Change-Id: I1d6cb31f38721f79e2cf93f9b8e4776f3720aa07
utils.c: In function 'osmo_str2lower':
utils.c:277:3: warning: array subscript has type 'char' [-Wchar-subscripts]
out[i] = tolower(in[i]);
And according to man:
If c is neither an unsigned char value nor EOF, the behavior of these func‐
tions is undefined.
Change-Id: I3fed2ab6a4efba9f8a21fcf84a5b3a91e8df084f
Recent commit 884ba0f2bc adds function
gsm0808_chan_type_to_speech_codec() but adds a mismatching name in
libosmogsm.map. openbsc.git's aoip branch can't build with this.
This must have been an on-the-fly rename that wasn't properly tested. Always
test your patches!
Change-Id: I68feb14f7bcb2f62b89f9b2d8c085d6824b493bc
Recent commit 3149b0d076 adds function
gsm0808_chan_type_to_speech_codec() but adds a completely mismatching name in
libosmogsm.map, as well as a definition with a typo in the name.
Fix the entry in libosmogsm.map.
Add the missing 'c' in gsm0808_utils.h
Change-Id: I5a621fa5ef6b632eabbe224f3dd383eacaffb695
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
Especially for short descriptions, it is annoying to have to type \brief for
every single API doc.
Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes
the first sentence of an API doc as the brief description.
Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
The length check of the decoder functions is not entirely
correct. The check also checks for values below zero,
which does not make sense, since the length is encoded
as uint8_t.
For some elements a minimum length is known (in most cases
this is 1), so checking for zero is sufficient but in some
cases (e.g. channel type) the spec mentions a minimum and
maximum length. This is now also reflected in the code.
Tweaked-by: nhofmeyr
Change-Id: I78bc887f68d1963d28c6fcd631ac20ccd893d6d6
The contents of the speech codec element (struct gsm0808_speech_codec),
that is also used in the speech codec list element (struct
gsm0808_speech_codec_list) can be generated directly from the
permitted speech parameter in the channel type field (struct
gsm0808_channel_type) when full AoIP with compressed speech via
RTP/UDP/IP is assumed and when the codec configuration on the air
interface exactly matches the codec configuration on the IP backhaul.
This patch adds a function that can be used as a helper to fill
out spech codec fields by only giving a permitted speech parameter
as input.
Change-Id: I257c972e9fdf0dfe940a8d483447085bd62e50a2
The permitted speech field used in channel type element (struct
gsm0808_channel_type) uses a different representation as
the type field in the speech codec element (struct
gsm0808_speech_codec)
This patch adds a function to convert from permitted speech to
speech codec type.
Change-Id: Ib26a9c20864459b2baaa04f49b6e7902ba44b7cb
The implementation of the parser/generator for the speech codec
information element slightly wrong, making it impossible to use
it properly.
(See also: 3GPP TS 48.008, 3.2.2.103)
Change-Id: Idabb0f9620659557672e1c6b90c75481192e5c89
It's a pity that even with this patch we still are fare away from having
the whole API documented. However, at least we have a more solid
foundation. Updates not only extend the documentation, but also make
sure it is rendered properly in the doxygen HTML.
Change-Id: I1344bd1a6869fb00de7c1899a8db93bba9bafce3
Previously MCS0 was incorrectly set for some of type1 header values
while according to 3GPP TS 44.060 it can only be set for type3. Fix
this:
* use EGPRS_MCS* constants instead of magic values
* do not set MCS0 for reserved bits values in EGPRS header type1
* return different error codes for invalid and unsupported MCS as well
as for other decoding errors
Note: there's no need to adjust tests because MCS0 decoding is not
supported but it's better to explicitly distinguish between unsupported
and invalid values nevertheless.
Change-Id: Id665d5c0cf50efa18b1bcbf4f17359418a380f9e
Related: OS#1524
In tightly embedded builds (--enable-embedded), we want the ability to
replace talloc with a very simple heap allocator to avoid the complexity
of talloc without modifying all our code that assumes talloc.
This will break the hierarchical notion of the allocator, but
libosmo{core,gsm,coding,codec} don't rely on that anyway.
Change-Id: Ie341034076f242a813f081919dd09d845775ad35
* add osmo_earfcn_bit_size_ext() function which allows to specify how many
EARFCNs we should skip when estimating required bit size for SI2quater
* make old osmo_earfcn_bit_size() into wrapper over newly added function
and mark it as deprecated
This is necessary to properly estimate necessary space for EARFCNs when
they are spread over several SI2q messages with different index.
Change-Id: I92e12e91605bdab9916a3f665705287572434f74
Related: RT#8792
Table 10.5.157 in 10.5.6.6 of 3GPP TS 04.08 is badly formatted. The first
value 0x19 "LLC or SNDCP failure" is in the same line as the heading and has
not been included in the struct_value so far.
Table 10.5.157 in 10.5.6.6 of 3GPP TS 24.008 fixes this formatting issue and
also defines two more values 0x08 and 0x18 which are now added to the struct
value_string.
Change-Id: I5bcc52f739ff0677011d024448afcc2a54869638
Add a new function timer function to set up the timer, similar to what
we have in the Linux kernel. This patch also converts existing opencoded
timer setup in the libosmocore tree as initial client of this new
function.
This patch implicitly removes function callback passed by reference that
defeat compile time type validation.
Compile-tested only, but I ran make check that reports success when
testing timer infrastructure.
Change-Id: I2fa49972ecaab3748b25168b26d92034e9145666
Coverity Scan reported a control flow issue in line 206:
CID 166898: Control flow issues (DEADCODE)
The second branch of the if statement can not be reached. The
purpose of the second if branch was to filter out zero length
elements if the header states that it is a non extended speech
codec type. This makes no sense, since the header needs at
least one byte.
This patch removes the second if branch, zero length elements
are catched by the already existing zero length check at the
beginning of the function
Change-Id: I89751fc0d598734c64ef1fdced75b7c4fa77c616
* data structure representing 3GPP TS 52.021 §9.4.62 SW Description
* function to serialize it into msgb
* function to deserialize it from buffer
* functions to extract/estimate buffer size for SW Description
* test harness (partially taken from OpenBSC)
There are several similar functions to deal with SW Description in
OpenBSC, there's also need to use similar functionality in
OsmoBTS. Hence it's better to put the code into common library with
proper tests and documentation.
Change-Id: Ib63b6b5e83b8914864fc7edd789f8958cdc993cd
Related: OS#1614
We are allocating a buffer on the stack without initializing it, and
then passing it into ipa_ccm_make_id_resp(). There is no real danger
from this, as the buffer is only uninitialized if num_ies is 0, but
let's memset() it for good style
Change-Id: If5761a47b8cba73ddcc02a88cfa5c87c1970c04e
Fixes: coverity CID#167040
The ipa.c file already contained code to parse an ID RESPONSE into the
'struct ipaccess_unit', but it didn't so far contain code to put
together an ID RESPONSE packet based on that structure. Let's change
that with ipa_ccm_make_id_resp() and a helper wrapper
ipa_ccm_make_id_resp_from_req().
Change-Id: Icbcd8827a75fd5f3393351c1ca372de85275ad35
The create function to generate the RESET ACKNOWLEDGE
message is not accessible from outside, as it does not
appear in limosmogsm.map. It also has not testcase.
This commit adds gsm0808_create_reset_ack() to the
map file and also adds a testcase.
Change-Id: I82d3411484f82b4a9205d407fa0442244678f183
gsm0808.h/c lacks functionality to generate BSS_MAP_MSG_ASSIGMENT_RQST messages.
These messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_assignment() function, that generates an
A/AoiP BSS_MAP_MSG_PAGING message.
Change-Id: I4d1d455a1e1cf95407e23ded7b7defbcf2dd6ff0
gsm0808.h/c lacks functionality to generate BSS_MAP_MSG_PAGING messages. These
messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_paging() function, that generates an A/AoiP
BSS_MAP_MSG_PAGING message.
Change-Id: I9afecf0109305ca5153bf081bb29cd94071dd2b7
gsm0808.h/c lacks functionality to generate CIPHER MODE COMMAND messages. These
messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_cipher() function, that generates an A/AoiP
CIPHER MODE COMMAND message.
Change-Id: I8eb1c357860c3e740b0f5d17e1c256bc87920958
The planned support for true A over IP requires the encoding of
the a Cell Identifier List element (see also BSS_MAP_MSG_PAGING).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I625245dd1dd396fc2bc189e8cd2c444a33042528
The planned support for true A over IP requires the encoding of
the an Encryption Information element (see also BSS_MAP_MSG_CIPHER_MODE_CMD).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I8262050a9d9fd3f17462cfbb046c6e034dccc6fb
The planned support for true A over IP requires the encoding of
the a Channel Type element (see also ASSIGNMENT REQUEST).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: Id0e2164d84b8cbcc6fe6a090fc7f40a1251421d7
the classic A implementation in libosmocore lacks support for AoIP
message elements. This patch adds support for AoIP by adding a set
of new gsm0808_create_..., which support the missing AoIP message
elements
Change-Id: I77f866abec1822d19871052f3c647ad782785b34
The planned support for true A over IP requires the encoding and
decoding of a so called "Speech Codec Element" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I0e1e2edf47adaa45b22d4b0bcae3640dba7ca200
The planned support for true A over IP requires the encoding and
decoding of a so called "AoIP Transport Layer Address" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I57933b0a06a3f54ec2a41e6ecb6ced9fbbc89332
The state check in lapd_dl_reset causes some buffers
never to be released. Using talloc report LAPD UA
message buffers are never released after each call
and cause a memory leak.
Change-Id: I2799b70623f2ec4dbc725eb213e332e98da02a3e
Expand 3GPP TS 52.021 §9.4.43 Probable Cause with Osmocom-specific value
for PCU version reporting to enable sending it via OML alarms.
Change-Id: If57459c0610f2c7b36d599b13087c8deef8bdd9e
Related: OS#1614
Ensure that a changed conv_gen.py and/or conv_codes_gsm.py result in
regeneration of the gsm0503* generated sources. Before this patch, manual
cleaning of the generated files was necessary to benefit from a code update.
Change-Id: Ib4328662c21280c0ea6aa9391a64ada2c6598704
Composing the message type string requires knowing the protocol discriminator.
To ease printing the message type, add this function to switch between the
defined value_string[]s depending on pdisc.
Also publish the message type value_string[]s -- without inline functions to
access them because it is anyway more convenient to use
gsm48_pdisc_msgtype_name() instead.
Since gsm48_pdisc_msgtype_name() is nontrivial, do not add as inline function
-- in case the message type is not known, it needs a static string buffer.
Change-Id: I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
I often want to log the protocol discriminator in the openbsc debug log. It's
more useful to get the name directly instead of looking it up every time.
Change-Id: I0f053e2a4360b27ffccda7cf82469fb1b1cbb3ae
To ensure that the IND index appended to SEQ does not affect the SEQ, the check
should read '>= seq_1', not '>'.
Change-Id: Ib1251159eee02aa07fae1b429ffec2e4604bf6a8
So far we incremented SQN by 1, which doesn't match the procedures described in
3GPP TS 33.102. An IND (index) denotes a non-significant part of SQN, and the
significant SEQ part needs to be incremented.
In OsmoHLR we furthermore want to use the "exception" suggested in annex C.3.4,
so that each HLR's client has a fixed IND index. In other words, we will not
assign IND cyclically, but keep IND unchanged per auth vector consumer.
Add 'ind_bitlen' and 'ind' to the osmo_sub_auth_data.u.umts structure and
increment SQN accordingly.
Add a comment explaining the details.
Because 'ind_bitlen' is still passed as zero, the milenage_test does not change
its behavior, which is a feature I want to clearly show in this patch. The test
will be expanded for the newly implemented SQN scheme in a subsequent patch.
Adjust osmo-auc-gen.c to still show the right SQN and SQN.MS -- because it is
passing ind_bitlen == 0, osmo-auc-gen can rely on single increments and know
SQN.MS is sqn - 1. Note that osmo-auc-gen_test output remains unchanged.
Related: OS#1968
Change-Id: Ibc97e1736a797ffcbf8c1f7d41c5c4518f4e41bf
Prepare for the implementation of splitting SQN increments in SEQ and an IND
part; particularly to clearly show where the changes in auth/milenage_test's
expectations originate.
Rationale: the source of UMTS auth vectors, for us usually OsmoHLR, typically
stores the last used SQN, not the next one to be used. Particularly with the
upcoming fix of the SQN scheme, this change is important: the next SQN will
depend on which entity asks for it, because each auth consumer may have a
particular slot in the IND part of SQN. It does not make sense to store the
next SQN, because we will not know which consumer that will be for.
The milenage_test has always calculated a tuple for SQN == 34. To account for
the increment now happening before calculating a tuple, lower the test_aud->sqn
by one to 0x21 == 33, so that it is still calculating for SQN == 34.
Because we are no longer incrementing SQN after the tuple is generated,
milenage_test's expected output after doing an AUTS resync to 31 changes to the
next SQN = 32, the SQN used for the generated tuple.
(BTW, a subsequent patch will illustrate AUTS in detail.)
osmo-auc-gen now needs to pass the user requested SQN less one, because the SQN
will be incremented befor generating the auth vector. Also the SQN remains the
same after generating, so SQN output needs less decrementing. Note that the
expected output for osmo-auc-gen_test remains unchanged, hence the same input
arguments (particularly -s <sqn> and -A <auts>) still produce the same results.
Note: osmo-hlr regression tests will require adjustments when this patch is
merged, because it must now pass desired_sqn - 1 instead of just desired_sqn.
See osmo-hlr change-id I4ec5a578537acb1d9e1ebfe00a72417fc3ca5894 .
Related: OS#1968
Change-Id: Iadf43f21e0605e9e85f7e8026c40985f7ceff1a3
We don't really use state numbers without bounds check into string
tables since March 2010, when value_string became part of libosmocore.
It's time to catch up, 7 years later...
Change-Id: I1dac7b4cb441a1119cc167112521e8b8aae62e63
There are some projects, such as GR-GSM and OsmocomBB, which would
benefit from using one shared implementation of GSM 05.03 code. So,
this commit introduces a new sub-library called libosmocoding, which
(for now) provides GSM, GPRS and EDGE transcoding routines, migrated
from OsmoBTS.
The original GSM 05.03 code from OsmoBTS was relicensed under
GPLv2-or-later with permission of copyright holders (Andreas Eversberg,
Alexander Chemeris and Tom Tsou).
The following data types are currently supported:
- xCCH
- PDTCH (CS 1-4 and MCS 1-9)
- TCH/FR
- TCH/HR
- TCH/AFS
- RCH/AHS
- RACH
- SCH
Change-Id: I0c3256b87686d878e4e716d12393cad5924fdfa1
Previously lapdm_datalink->entity->mode was dereferenced without
checking if correct entity is present. This might lead to
segfault. Check it explicitly before dereferencing, log error and
gracefully return if necessary.
Change-Id: I0361e3731e86712b415a370cab1128d611988f56
Related: OS#1898
It is in the public header file and allows to easily bind it from
other languages (without having to go through the abstraction).
Change-Id: I0128d529c52ec030cfb87b0aff3c69cadf2c59d2
This change makes the conv_gen application more interactive
and flexible, allowing to generate not only code definitions
but also the test vectors and header files in the future.
Moreover, it becomes possible to select exact code family,
such as GSM, GMR etc.
Change-Id: I0b476b00234c17f78b41d695cf3bfd13edb64c28