Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I84ef43f700e125c7a65f92347f12844e07e65655
This is a bit of a hack, as we want to maintain binary compatibility
without breaking existing users of libosmocore. To do so, we use the
'num_auth_vectors' field in two ways now:
* In the existing use case as part of SEND_AUTH_INFO_RESPONSE, it
indicates the number of vectors stored in the 'auth_vectors' field
* In the new use case as part of SEND_AUTH_INFO_REQUEST, it indicates
the number of vectors actually requested by the MSC/SGSN/MME.
Change-Id: Iaecc47280f8ce54f3e3a888c1cfc160735483d0f
In July 2018 in commit Ide240279240322f643e142229eb7829f538c6314 we
introduced the successor gsm0480_gen_ussd_resp_7bit(), which is also
what both libosmogsm-internal code as well as osmo-hlr have been ported
to. For some reason it wasn't marked deprecated back then.
Change-Id: Iff4c91b5b98a73d9a30aa42f6b2a1ebcc8a45343
GSUP routing was introduced when adding the E interface. Hence that was the
first realm where routing errors could occur. I did notice back then that this
message type was special: it does not convey a response to a particular message
kind -- it does not make sense, for example, to return an Updating Location
Error cause, and do that for all conceivable message types. Instead, this tells
the sender that a deeper error exists, i.e. that the desired peer is completely
gone and unreachable.
I did not foresee though that for D-GSM, there would also be arbitrary GSUP
proxy routing, and that this error is not limited to E interface semantics.
From today's point of view, adding the "_E_" in the name was a mistake.
Remove that "_E_" to yield OSMO_GSUP_MSGT_ROUTING_ERROR (with unchanged message
type discriminator), but provide a #define linking the old name
OSMO_GSUP_MSGT_E_ROUTING_ERROR to the new one.
The only visible change should be that osmo_gsup_message_type_names[] now
returns the new name without "_E_". I am not aware of any regression test
fallout from that.
Change-Id: Ic8e8bd11522d6c51ac7aaf946516cbce26bc6e1e
The calculation of the beginning of a block for TCH/F, TCH/H and FACCH
can be challenging since those channels are affected by the diagonal
interleaving of the TCH channels. However, GSM 05.02 Section 7 Table 1
of 5 specifies how the blocks are distributed over the TDMA frame
interval. Lets add a mapping function that is based on that table
Related: OS#3803
Change-Id: I3d71c66f8c401f5afbad9b1c86c24580dab9e0ce
OSMO_GSUP_SUPPORTED_RAT_TYPES_IE corresponds to the Supported RAT Types
Indicator from 3GPP TS 29.002. See 8.1.2 MAP_UPDATE_LOCATION service,
which indicates the capabilities of the MSC/VLR to the HLR.
So far, have room for eight RAT types in the gsup_msg. That is an arbitrary
random choice without any rationale.
OSMO_GSUP_CURRENT_RAT_TYPE_IE is useful to communicate the currently
used RAN / RAT type of the current subscriber during Location Updating Request.
Change-Id: I93850710ab55a605bf61b95063a69682a2899bb1
As 3GPP doesn't specify how the BSC shall communicate ETWS Primary
Notifications over Abis/RSL, we have to use a vendor-specific RSL
message for this. And in order to know if the peer supports this
feature, we introduces BTS_FEAT_ETWS_PN.
Change-Id: I89c24a81ada6627694a9632e87485a61cbd3e680
Related: OS#4046, OS#4047
The user length is the first IE *in* the fixed-length TV, make sure
cbsp_dec_write_repl() respects that.
Change-Id: I864cafac2466a89a4bd9644bc73363fff2babd03
The CBSP code assumed that gsm0808_decode_cell_id_u() would return
the number of bytes it has consumed/parsed. But it actually always
returns '0', whcih makes us run in an endless loop :(
Change-Id: I5758af4ec11a827d4b888a3a16c4ec22de90a7d6
Rather than having the encoder/decoder library print some log
messages in case of encoding/decoding errors, let's provide something
akin to 'errno', but with a string instead of a numeric error code.
The 'osmo_cbsp_errstr' global variable (if set) contains a
human-readable string describing the most recent encoding/decoding error.
It exists separately for each thread and hence can be used safely in
multi-threaded environments.
Change-Id: Id9a5a595a76ba278647aee9470ded213d8464103
This introduces definitions as well as a parser+encoder for the
Cell Broadcast Service Protocol (CBSP) as specified in 3GPP TS 48.049.
CBSP is used on the interface between CBC and BSC.
Related: OS#3537
Change-Id: I5b7ae08f67e415967b60ac4b824db9e22ca00935
When using `OSMO_ASSERT(exp);` clang will warn about
an empty expression because the semi colon was superflous.
Use do {} while (0) to enfore the need of a semi colon.
This might break other test.
Change-Id: I2272d29a81496164bebd1696a694383a28a86434
The timeout is calculated dynamically in t200_by_lchan() based on FN
advance value estimated by bts_get_avg_fn_advance(), so it's informative
to have the final value printed out.
Change-Id: Ib50a9c23de881c66c9218833703cc41101e06bfd
Return ENOSPC if the decoding buffer is one byte too small, instead of
returning 0 and silently truncating the string. Add a new "truncated"
variable to detect if the loop breaks in the final iteration.
The string is not truncated if there is exactly one 0xf ('\0') higher
nibble remaining. This is covered by the existing test case "long
15-digit (maximum) MSISDN, limited buffer".
Related: OS#4049
Change-Id: Ie05900aca50cc7fe8a45d17844dbfcd905fd82fe
During testing with BTS_Tests_LAPDm.TC_t200_n200() it was discovered
that the existing LAPD[m] implementation always gave up at N200-1
retransmissions, rather than N200 retransmissions.
The first transmission doesn't count, and hence we must have N200
actual re-transmissions. The Error message is then described as
"T200 expired N200+1 times", i.e. we start T200 one more time after
the last re-transmission and only give up if it expires again (i.e.
no ACK received)
Change-Id: Ic33854ee61311f73b7db55eeef10280349151097
Related: OS4037
TS 04.06 specifies a N200 re-transmission counter that depends on the
channel type, which we didn't care about at all so far. Let's have the
caller tell us the channel type so we can internally look up the correct
N200 value for it.
At the same time, permit the user to specify T200 re-transmission timer
values for each SAPI on both DCCH and ACCH, which is required at least
in the BTS as per GSM TS 12.21. Also, extend the timer resolution of
the API from seconds to milli-seconds, which is more applicable as
particularly on the FACCH the recommended values are in the 200ms range.
Change-Id: I90fdc4dd4720d4e02213197c894eb0a55a39158c
Related: OS#3906
Related: OS#2294
Related: OS#4037
This function parses a single Cell ID list element into a
'union gsm0808_cell_id_u'. This function is going to be used
by the upcoming CBSP support.
Related: OS#3537
Change-Id: I08b33881667aa32f01e53ccb70d44d5b79c7c986
We have a number of library-internal static global buffers which are
mainly used for various stringification functions. This worked as
all of the related Osmocom programs were strictly single-threaded.
Let's make those buffers at least thread-local. This way every thread
gets their own set of buffers, and it's safe for multiple threads to
execute the same functions once. They're of course still not
re-entrant. If you need re-entrancy, you will need to use the _c()
or _buf() suffix version of those functions and work with your own
(stack or heap) buffers.
Change-Id: I50eb2436a7c1261d79a9d2955584dce92780ca07
3GPP TS 04.06 is quite clear that the [segmented] L3 payload can be as
long as 251 bytes. Our libosmocore lapdm implementation truncated
already at 200 bytes :(
Change-Id: I6769986f27dda1d429ed7b2e32c36d34663acba9
Closes: OS#4035
The library should either provide functions that implement encoding
of those rest octets, or it shouldn't. Providing a function that
doesn't do anything but pad the buffer is useless.
Change-Id: Ie10684de6a6b2663e2a871fcdb2b275b6ad7a1e7
There's very little sense behind introducing a function into
libosmogsm which doesn't implement 90% of the spec. Let's allow
the caller to provide the various optional bits of information to
the encoder, rather than generating mostly static SI6 rest octets.
Change-Id: Id75005a0c4a02ce7f809692d58b3bd226bc582b2
the symbols had an omso_ prefix, while the entry in the .map file
didn't. As a result, all related symbols were never exported and
hence not usable by any users of the dynamic library.
Change-Id: I8b1ee2405f6338507e9dfb5f1f437c4c2db2e330
The gsm48_rest_octets.c file was added in Change-Id
I47888965ab11bba1186c21987f1365c9270abeab, but it never actually
ended up being compiled as it wasn't listed in the makefile :/
Change-Id: I0355115c2645f236c9e32cf7a563cf51a857e8a3
Relsted: OS#3075
As gsm48_rest_octets.c is not listed in the Makefile.am, it's
never actually compiled and we never noticed that it's calling
functions by symbol names that don't exist :/
Change-Id: I7b1e436f70e0c60979261db87606f38271ec47d3
Related: OS#3075
libosmo{core,gsm,vty} code is GPLv2+. The rest octet code originated in
osmo-bsc.git and was moved here without changing the license. That was a
mistake, it always was meant to be under GPLv2-or-later after moving to
libosmocore.git.
Original copyright is mine. For contributions by sysmocom, I as the
managing director can approve the license change.
This means only Holger needs to ACK this.
Change-Id: Ief3009dc28dd83e1e26a7101af2eed2341684a87
The documentation of gsm48_decode_bcd_number2() clearly states that
the output truncation is a erroneous case, so it should actually
return negative in such cases. Let's return -ENOSPC.
Change-Id: I75680f232001ba419a587fed4c24f32c70c3ad2b
Thanks to the new unit test for BCD number encoding / decoding, it was
discovered that gsm48_decode_bcd_number2() does not properly handle
encoded LV if the output buffer size is equal to the original MSISDN
length + 1 (\0-terminator): one digit is lost.
For example, decoding of 15-digit long MSISDN to a buffer of size
16 (15 digits + 1 for \0) would give us only 14 digits.
The problem was that 'output_len' was being decremented before
checking the remaining buffer length and writing a digit to it.
As a result, the maximum length was always one byte shorter.
Change-Id: I61d49387fedbf7b238e21540a5eff22f6861e27a
Fixes: OS#4025
libosmo{core,gsm,vty} code is GPLv2+. The OAP code originated in
osmo-msc.git and was moved here without changing the license. That
was a mistake, it always was meant to be under GPLv2-or-later after
moving to libosmocore.git.
Copyright is with sysmocom, so I as the managing director can
approve the license change.
Change-Id: I08311fa8214c15f8df8945b9894226608cf96f15
We don't really *need* it in libosmocore as such, but the lack of
having all osmocom extensions listed here lead to using overlapping
definitions: 0x18 was used for dynamic PDCH on the Abis side, but also
for CBCH on the L1SAP side. Let's list them all here to increase
visibility in case anyone wants to extend this further...
Related: OS#4027
Change-Id: I93e557358cf1c1b622f77f906959df7ca6d5cb12
The caller of lapdm_rslms_recvmsg() (e.g. osmo-bts/src/common/rsl.c)
assumes the message ownership is transferred. However, in one of the
two error paths, msgb_free() was not called and hence we had a memory
leak.
Also clarify the msgb ownership transfer in a comment.
Related: OS#3750
Change-Id: Id60cb45e50bfc89224d97df6c68fcd2949751895
So far, the TLV code contained two types of functions
* tlp_parse() to parse all TLVs according to definition into tlvp_parsed
* various helper functions to encode individual TLVs during message
generation
This patch implements the inverse of tlv_parse(): tlv_encode(), which
takes a full 'struct tlv_pared' and encodes all IEs found in it. The
order of IEs is in numerically ascending order of the tag.
As many protocols have different IE/TLV ordering requirements, let's add
a tlv_encode_ordered() function where the caller can specify the TLV
ordering during the one-shot encode.
Change-Id: I761a30bf20355a9f80a4a8e0c60b0b0f78515efe
Add the constant, so it can be used in create-subscriber-on-demand
related patches. ITU-T Rec. E.164 6.1 states that maximum international
number length should be 15. I did not find a source for a minimum
length, but I've added the constant and set it to 1 for consistency
(based on the existing osmo_msisdn_str_valid() function).
Related: OS#2542
Change-Id: Idc74f4d94ad44b9fc1b6d43178f5f33d551ebfb1
Oliver Smith
Harald Welte
Pau Espin
Neels Hofmeyr
Daniel Willmann
Philipp Maier
Kevin Redon