Andreas Eversberg
0c9de251be
NMT: Implement Hagelbarger Code
...
This will correct burst errors of received messages. If the message
is too corrupted, it will be ignored, because some element may not
match then. The digits and line signals are checked for consistency,
since they are repeated serveral times in a message.
2017-08-08 12:52:29 +02:00
Andreas Eversberg
cd9cb9a107
Minor fix for NMT debug output
2017-07-15 12:45:20 +02:00
Andreas Eversberg
a088536533
Minor fix for IQ data display
2017-07-15 12:45:20 +02:00
Andreas Eversberg
fda224c27f
Fixing and improving SDR support (SoapySDR and UHD)
...
- Soapy SDR now works.
- Channels can be selected.
- Antennas can be listed and selected.
- Device args, tune args, stream args can be specified.
2017-07-15 12:45:19 +02:00
Andreas Eversberg
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
Andreas Eversberg
aa20d4e50e
Cleanup common/Makefile.am
2017-07-15 07:38:15 +02:00
Andreas Eversberg
557d19de66
NMT: Show trafic areas in hex and allow to select unsupported areas
2017-07-15 07:38:14 +02:00
Andreas Eversberg
3774519631
NMT: Fixed "use after free" bug
2017-07-15 07:38:13 +02:00
Andreas Eversberg
7af886c600
NMT: Fixed NMT digit decoding
2017-07-15 07:38:13 +02:00
Andreas Eversberg
085ceb9173
Minor fixes to compandor
2017-07-15 07:38:12 +02:00
Andreas Eversberg
a12329a884
Work on docs
2017-07-15 07:38:11 +02:00
Andreas Eversberg
3ce50f8ab3
AMPS: Fixes in message display and function names
2017-07-15 07:38:10 +02:00
Andreas Eversberg
3788b3e8a5
TACS support (variations added to AMPS code)
...
These are:
- Bandwidth only 25 KHz, so lower deviations
- Data rate only 8000 KHz
- SID is called AID (Area ID)
- MIN1 coding is different
2017-07-15 07:38:09 +02:00
Andreas Eversberg
d52f4cd29d
NMT: Mark Benelux and Czech/Slovak networks as tested
...
I have tested the network with B/NL/L and CZ/SK phones, and they work!
2017-06-15 18:28:26 +02:00
Andreas Eversberg
1aebedc66a
NMT: Fixed line signal description
2017-06-11 09:01:21 +02:00
Andreas Eversberg
7a9762e28e
NMT: Disable Supervisory signal during DMS (SMS) transfer and use Timeout
...
There is no Supervisory signal during DMS transfer, so there must be
no timeout for Supervisory signal. Instead, the SMS layer will timeout
after some seconds without receiving data.
2017-06-11 08:13:52 +02:00
Andreas Eversberg
3e86ef95c4
B-Netz: Minor printf fix
2017-06-10 17:49:59 +02:00
Andreas Eversberg
19afb792b5
NMT: Fix and adjustements to supervisory signal detection
2017-06-10 17:11:47 +02:00
Andreas Eversberg
50b2021d21
NMT 450: Support for other European counties, like Belgium, Czech, Slovakia
2017-06-10 13:08:51 +02:00
Andreas Eversberg
dbdedfe1a1
AMPS: Fixed selecting right CRC values for FOCC words
2017-06-10 13:08:26 +02:00
Andreas Eversberg
d23672354f
Add option to set MNCC socket name (to run multiple base stations)
2017-06-10 13:08:26 +02:00
Andreas Eversberg
329463bb8c
SDR: Add option to give channel number
...
Using SoapySDR server allows to run different networks on multi channel
SDR devices.
2017-06-10 13:08:25 +02:00
Andreas Eversberg
aef4cf0997
Make spectrum display nicer by plotting continuous lines between samples
2017-06-10 13:08:24 +02:00
Andreas Eversberg
e0534db15c
Make spectrum display a little nicer by using '|' instead of ':'
2017-06-10 13:08:23 +02:00
Andreas Eversberg
e653475ff7
NMT: Allow NULL (B'0000') to be used as country selector in traffic area
2017-06-10 13:08:23 +02:00
Andreas Eversberg
57d4d1739e
AMPS/C-Netz: Correctly release pending transaction when creating a new one
...
If transactions is created, look on all channels for pending transaction
with same subscriber.
1. Remove that transaction.
2. Make channel return to IDLE.
3. Release call, if callref exists.
2017-06-10 13:08:22 +02:00
Andreas Eversberg
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
Andreas Eversberg
bb64c6b3ba
AMPS: Add DTX support
...
When DTX is enabled (-S dtx=2 or 3), a missing SAT tone causes the receiver
to mute audio and insert a low level of comfort noise.
Also the missing SAT tone will not cause the connection to be terminated.
2017-06-10 13:08:19 +02:00
Andreas Eversberg
2c1ab89723
Notify about usage of channels that are next to each other
...
It is required to have at least one free channel between channels, to
avoid interferences.
This is only a warning, it will not reject channels next to each other.
2017-05-24 14:01:25 +02:00
Andreas Eversberg
fc3b3e07be
Finetuning LOSS (noise) detection
...
The algorithm is still bad, but works in most cases
2017-05-24 14:00:08 +02:00
Andreas Eversberg
56024b384b
AMPS: Serveral minor fixes
2017-05-23 18:11:10 +02:00
Andreas Eversberg
76a3484c5c
C-Netz: Make demodulation algorithm (slope or leve) slectable via option
...
By default (auto), the algorithm is selected, depending on sound card
or SDR usage. For testing and debugging purpose, the algorithm can be
forced.
2017-05-19 19:11:59 +02:00
Andreas Eversberg
c086e66b7c
minor cleanups
2017-05-17 20:14:37 +02:00
Andreas Eversberg
0557bbbc43
SDR: Checking given parameters with a tollerance of up to 0.001
...
Rounding errors may cause given parameters to be changed a little.
When comparing the set-values with the get-value, a small amount
of tollerance must be allowed.
Thanx to Syvain, pointing to this bug!
2017-05-17 20:06:47 +02:00
Andreas Eversberg
683078a7a0
SDR: Spectrum display will not scale FFT result
...
Instead the greatest possible width that will fit into the window will
be used. This width is 2 to the power of N.
2017-05-17 20:06:46 +02:00
Andreas Eversberg
ef7ff26793
C-Netz: SDR now uses zero-crossing to detect level changes.
...
This does not work with analog radio, but with SDR it works.
The quality should be better and the process is faster.
2017-05-17 20:06:46 +02:00
Andreas Eversberg
07e45103ef
Work on docs
2017-05-17 20:06:45 +02:00
Andreas Eversberg
9d87b5bf0f
C-Netz: Improved transmission of speech
...
The speech is now correctly ramped up and down during pause bits.
2017-05-17 20:06:44 +02:00
Andreas Eversberg
12dcc6c40f
Minor fixes on AMPS messages
...
- Flipping polarity is now performed after B/I has been applied
- Correcting sysinfo
2017-05-17 20:06:43 +02:00
Andreas Eversberg
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
Andreas Eversberg
ca10048e5c
Rename filter -> iir_filter (file name and instance name)
...
This is useful when using fir_filter in the future.
2017-05-15 21:46:32 +02:00
Andreas Eversberg
d03443c4f1
SDR: Added SoapySDR's compiler flags to common/Makefile
2017-05-15 21:46:30 +02:00
Andreas Eversberg
c04d046210
SDR: Fixed SoapySDR's arguments parsing
2017-05-15 21:46:30 +02:00
Andreas Eversberg
fbdb9ece01
SDR: Allow direct IQ TX and RX instead of fm modulating a list of channels
...
This is performed by reading and writing IQ data to "sample" pointer with
channel number set to 0.
2017-05-15 21:46:29 +02:00
Andreas Eversberg
65694f3b80
SDR: disable TX or RX by setting TX or RX frequency to 0
...
This way it is possible to use SDR simplex
2017-05-15 21:46:29 +02:00
Andreas Eversberg
6e0e0c9ce8
fixup Rework on audio buffer management
2017-05-15 21:46:28 +02:00
Andreas Eversberg
9dda9e1efc
SDR: Add option to set IF bandwidth. If not defined, sampling rate is used.
2017-05-15 21:46:27 +02:00
Andreas Eversberg
1445ca2fac
SDR: Add option to send (previously recorded) IQ data instead of TX data
2017-05-15 21:46:26 +02:00
Andreas Eversberg
369bda87a9
C-Netz: Improved decoder debugging
...
FM decoder debug output is now written to text files for better
debugging of process.
2017-05-15 21:46:25 +02:00
Andreas Eversberg
8e0d7d2513
samplerate.c: Allow transcoding to lower sample rate other than 8000 Hz
2017-03-04 16:52:20 +01:00