Make the vsub argument of both vlr_subscr_msisdn_or_name()
and vlr_subscr_name() a const.
The LOGVSUBP() macro uses vlr_subscr_name() and will not generate a
warning anymore when used with a const vsub.
Change-Id: If609269191f4df6186d823a2eee14012846328e2
Replace locally defined enum ran_type with libosmocore's new enum
osmo_rat_type, and value_string ran_type_names with osmo_rat_type_names.
The string representations change, which has cosmetic effects on the test suite
expectations.
Depends: I659687aef7a4d67ca372a39fef31dee07aed7631 (libosmocore)
Change-Id: I2c78c265dc99df581e1b00e563d6912c7ffdb36b
If Assignment fails in the BSC, trigger an EV_TEARDOWN_ERROR in the mgcp_ctx
FSM instance, so that the call gets torn down immediately. Before this, the
non-call would idle around without anything happening.
Related: OS#3236
Depends: I11b182a03f5ecb6df7cd8f260757d3626c8e945d (libosmocore)
Change-Id: I358cfbaf0f44f25148e8b9bafcb9257b1952b35a
The flag is set to true when an assignment has been started, and it is only
relevant for a CC transaction. So fix naming and place in cc struct.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Change-Id: I8dacf46141ba0b664e85b0867ade330c97d8495f
Various places in the code check a flag whether assignment was started and
launch it. To fix incoming-call-during-ongoing-call, I will tweak that logic.
To be able to do that only in one place, remove code dup.
Cosmetic preparation for I1f8746e7babfcd3028a4d2c0ba260c608c686c76 and
I0ba216b737909e92080a722db26e3577726c63cb/
Depends: I11b182a03f5ecb6df7cd8f260757d3626c8e945d (libosmocore: LOGPFSMSL)
Change-Id: I11c0b7dc3f1a747028629b48e522bb3b864884ba
In rare cases, a conn is already associated with a subscriber. So far, we
abort()ed on that, bringing the entire osmo-msc down. Rather log an error and
keep the service running.
In vlr.ops.subscr_assoc, add success/failure return value, and abort the
LU/PARQ on error.
I haven't figured out in detail yet why/how a subscriber would re-launch a
LU/PARQ on a conn that is already associated, so far it is merely clear that we
do not want to crash the MSC if that happens. A log is in OS#3742.
Related: OS#3742, OS#3743
Change-Id: Ic0d54644bc735700220b1ef3a4384c217d57d20f
As a rudiment of OsmoNiTB, OsmoMSC is still involved in SMS
processing, storage (in SQLite DB), and routing (via SMPP).
In real networks this is done by the external entity called
SMSC (SMS Centre), while the MSC is doing re-encapsulation
of GSM 04.11 SM-TL (Transport Layer) payload (i.e. TPDU)
between SM-RL (Relay Layer) and MAP.
Since OsmoMSC itself is not a 'Network in The Box' anymore, it
makes sense to replicate the 'traditional' behaviour of MSC.
The problem is that this behaviour cannot co-exist with the
current implementation, so the key idea is to rip out the
local SMS storage and routing from OsmoMSC, and (re)implement
it in a separate process (OsmoSMSC?).
As a temporary solution, this change introduces a 'kill-switch'
VTY option that enables routing of SMS messages over GSUP
towards ESME (through VLR and HLR), but breaks the local
storage and routing. This is why it's disabled by default.
As soon as we move the SMS processing and storage away from
OsmoMSC, this behaviour would be enabled by default, and
the VTY option would be hidden and deprecated. At the moment,
this option basically does nothing, and will take an effect
in the follow-up changes.
Change-Id: Ie57685ed2ce1e4c978e775b68fdffe58de44882b
Related: OS#3587
We can check if we're parsing the config file by checking
whether vty->type equals VTY_FILE. This avoids the use of
an extra local variable to track the parsing state.
Change-Id: I85161575e025f7c389832427a434bd8e2d6ecc75
Fixes: 1051c42088
Related: OS#3355
Always use LAC which is part of Cell Global ID otherwise we might end up
in a situation where separately stored LAC differs.
Both are described in 3GPP TS 23.008 $2.4 as temporary subscriber data
to be stored in VLR. Both are defined in 3GPP TS 23.003. The LAC is part
of LAI which is part of CGI so there should be no case when those values
differ for a given subscriber.
Change-Id: I993ebc3e14f25e83124b6d3f8461a4b18f971f8e
The 'ipa-name' option can now only be set via the configuration file
because changing the IPA name at run-time conflicts with active
GSUP connections and routes configured in the HLR. The osmo-msc
program must be restarted if its IPA name needs to change.
Change-Id: I6cff91793e646e0396e8f1bc87d0f52709e5f12a
Related: OS#3355
Two reasons:
- the caller of msc_mgcp_ass_complete() from Iu, iucs_rx_rab_assign(), failed
to be adjusted, breaking IuCS, as an --enable-iu --enable-werror build shows.
Unfortunately our gerrit verification doesn't --enable-werror for osmo-msc.
- the condition of requiring ST_MDCX_RAN is faulty, breaking GSM CS.
This reverts commit 212c0c9bda.
Change-Id: I8348675c2f7c8856ea1682d05ee54160d4cfeb96
Add a 'ipa-name' VTY command which overrides the default IPA name
used by the MSC. This is a prerequisite for inter-MSC handover.
Related: OS#3355
Change-Id: I317d6c59f77e92fbb2b875a83dc0ec2fa5cb6006
BSSMAP Assignment Complete: sort MGCP handling upon Assignment Complete to the
proper locations. a_iface_bssap.c is not the right place to invoke the MGCP
related procedures.
- in a_iface_bssap.c only decode the IEs.
- call ran_conn_assign_compl() and pass decoded values.
- drop msc_assign_compl(), it was dead code; instead:
- add ran_conn_assign_compl()
- pass on all MGCP related info to msc_mgcp_ass_complete()
- move all MGCP ctx related handling from a_iface_bssap.c to msc_mgcp.c.
I'm dropping some comments to save some time, because if I adjust them IMHO
they would still anyway restate the obvious.
ran_conn_assign_compl() is now quite a thin shim, but it makes sense to have
it:
- This is the place that should tear down the ran_conn in case assignment
failed, left for a future patch.
- In the light of upcoming inter-MSC handover, ran_conn_assign_compl() will be
the place where the Assignment Complete message might be relayed to a remote
MSC.
Change-Id: I8137215c443239bddf3e69b5715839a365b73b6c
So far the only way to use external MNCC is to pass the -M cmdline arg:
osmo-msc -M /path/to/socket
However, the osmo-msc.service file for systemd is installed by 'make install',
and hence it is quite impractical to depend on such a config item to be
required in the service file:
- It defies any scheme an operator may have in place to compose the
osmo-msc.cfg file -- this option doesn't go in the .cfg file but needs
separate action to add to the installed service file.
- After a make install or package upgrades / re-installations, this option will
be plain overwritten silently, or lead to the need for resolving file
conflicts.
The initial spark for this came from configuring the 35c3 GSM from cfg
templates.
Change-Id: I2ec59d5eba407f83295528b51b93678d446b9cee
gsm_subscriber.h contains some legacy cruft, part of which is that the VLR's
max MSISDN length should rather be defined in vlr.h. Same for GSM_NAME_LENGTH
-> VLR_NAME_LENGTH.
Adjust some sms_queue stuff that anyway includes vlr.h already.
Drop gsm_subscriber.h from vlr.h.
Add other (more concise) includes that thus become necessary, since the include
chain vlr.h->gsm_subscriber.h->gsm_data.h is no longer in place.
Change-Id: Iab5c507ec04fc2884187cf946f6ae2240e4a31f8
Along goes GSM_KEYSEQ_INVAL as VLR_*.
It's where it logically belongs, and is almost the only reason why vlr.h
includes gsm_data.h. The remaining reason, GSM_EXTENSION_LENGTH, will be moved
by upcoming patch.
Change-Id: I122feae7ee3cbc59e941daef35a954bce29fec76
For hysterical raisins, there are some header files that contain few
declarations, and where the name doesn't reflect the content. Combine them to
new msc_common.h:
- common.h
- common_cs.h
- osmo_msc.h
Change-Id: I9e3a587342f8d398fb27354a2f2475f8797cdb28
With the dawn of inter-BSC,MSC handover, adopting the MSC-A,-I,-T roles from
3GPP TS 49.008, the RAN connection shall soon be a neatly separated corner of
osmo-msc, so gravitate ran_conn decarations to files of matching name.
Also, the current chaos of API defined in files with mismatching/meaningless
names drives me crazy.
Change-Id: Ice31e6c43e46678538c65261f150c67e1d0845e5
Following previous rename of gsm_subscriber_connection:
Some functions and #defines are still called like "msc_conn" or just "msc_",
while they are clearly about a RAN conn.
To avoid confusion with the future separate concepts of MSC roles and a RAN
connection, rename all those to match the common "ran_conn" prefix.
Change-Id: Ia17a0a35f11911e00e19cafb5d7828d729a69640
In preparation for inter-BSC and inter-MSC handover, we need to separate the
subscriber management logic from the actual RAN connections. What better time
to finally rename gsm_subscriber_connection.
* Name choice:
In 2G, this is a connection to the BSS, but even though 3GPP TS commonly talk
of "BSS-A" and "BSS-B" when explaining handover, it's not good to call it
"bss_conn": in 3G a BSS is called RNS, IIUC.
The overall term for 2G (GERAN) and 3G (UTRAN) is RAN: Radio Access Network.
* Rationale:
A subscriber in the MSC so far has only one RAN connection, but e.g. for
inter-BSC handover, a second one needs to be created to handover to. Most of
the items in the former gsm_subscriber_connection are actually related to the
RAN, with only a few MM and RTP related items. So, as a first step, just rename
it to ran_conn, to cosmetically prepare for moving the not strictly RAN related
items away later.
Also:
- Rename some functions from msc_subscr_conn_* to ran_conn_*
- Rename "Subscr_Conn" FSM instance name to "RAN_conn"
- Rename SUBSCR_CONN_* to RAN_CONN_*
Change-Id: Ic595f7a558d3553c067f77dc67543ab59659707a
msc_compl_l3() always returns MSC_CONN_ACCEPT, because the conn FSM handles (or
should handle) all reject cases. The accept/reject return value is a legacy
from libbsc internally passing a conn over to libmsc, in osmo-nitb.
Drop enum msc_compl_l3_rc.
Change msc_compl_l3_rc() to return void.
Change all callers to always act like for acceptance, as they always did anyway.
Drop some local variables now no longer needed.
Adjust the comment to msc_compl_l3().
Drop a bunch of #if-0'd code from msc_compl_l3().
Change-Id: I759d15f4e820d5fc16397ed7210ce92308e52a09
On UTRAN, Security Mode is used instead of Ciphering Command, which does not
feature an A5 algorithm id.
Change-Id: Idc7ca9da1aa13ae16f5db2cb1024676cbc770820
gsm_network contains an int handover.active which is always zero. Drop it.
There is real handover code coming up soon, one part of this is to avoid
confusion.
The internal MNCC code queried it to decide whether to MNCC_BRIDGE or proxy RTP
(MNCC_FRAME_RECV). Since RTP is being handled by osmo-mgw since forever, drop
that entire condition from mncc_builtin.
Change-Id: Ie16e718266882588b38297121364ca0b7fdfe948
According to GSM TS 04.11, the SMC (Short Message Control) state
machine is a part of CM-sublayer of L3, that is responsible for
connection management (establisment and releasing), and SM-RP
(Relay Protocol) message delivery.
For some reason, the connection establisment request from SMC
(GSM411_MMSMS_EST_REQ) was not handled properly - it was
always assumed that connection is already established.
This is why the code initiating a MT (Mobile Terminated) SMS
transfer had to establish a radio connection with subscriber
manually.
Let's benefit from having the SMC state machine, and offload
connection establishment to it. This change makes the local
implementation closer to GSM TS 04.11, and facilitates the
further integration of GSUP transport.
NOTE: the expected unit test output is changed, because now we
always allocate a transaction first, and then establish a
connection, not vice versa.
Change-Id: I4a07ece80d8dd40b23da6bb1ffc9d3d745b54092
According to GSM TS 04.11, section 8.2.3, the RP Message Reference
is a mandatory field for all messages on the SM-RL (SM Relay Layer),
that is used to link an RP-ACK or RP-ERROR message to the associated
(preceding) RP-DATA or RP-SMMA message transfer attempt.
This change extends the transaction state structure with SM-RP-MR,
and introduces a new function for matching transactions within a
given connection by this reference.
Change-Id: Ice47c37ecef4416e65ecee8931d946c915316791
Count COMPLETE and REJECT messages. Besides general troubleshooting
that's also useful for TTCN-3 tests to check that OsmoMSC processed
those messages as expected.
Change-Id: I5822b2b38b64f1a691b26c926a8e2bece21dc624
Related: OS#3187
The external MNCC handler may hang indefinitely in cases where the remote
end of the MNCC ceases to work properly. Add a global guard timer to
make sure the call reaches ACTIVE state.
Change-Id: I7375d1e17cd746aac4eadfe1e587e82cf1630d3d
Related: OS#3599
This recent patch moves Classmark storage to the VLR subscriber, and introduced
a segfault when a Classmark Update is received during IMSI detach:
commit 986fe7ed18
change-id I27081bf6e9e017923b2d02607f7ea06beddad82a
Mon Sep 17 01:12:13 2018 +0200
"store classmark in vlr_subscr, not conn"
It assumed that we would never accept any Classmark Update messages unless we
also have a valid subscriber for it. Well, that is proven wrong by the
ttcn3-msc-test TC_imsi_detach_by_imsi(), which brings osmo-msc to its knees.
Fix: in case of no valid vlr_subscr being present, store Classmark in the conn
temporarily, and copy any received Classmark to VLR subscriber as soon as it
gets associated with the conn (if at all).
Change-Id: Ib2a2ae6bf86e8f29fc6751a8b5cdb7187cd70290
When the VLR requests a Ciphering Mode with vlr_ops.set_ciph_mode(), and if we
need a ciph algo flag from a Classmark information that is not yet known
(usually CM 2 during LU), send a BSSMAP Classmark Request to get it.
To manage the intermission of the Classmark Request, add
- msc_classmark_request_then_cipher_mode_cmd(),
- state SUBSCR_CONN_S_WAIT_CLASSMARK_UPDATE,
- event SUBSCR_CONN_E_CLASSMARK_UPDATE.
From state AUTH_CIPH, switch to state WAIT_CLASSMARK_UPDATE. Once the BSSMAP
Classmark Response, is received, switch back to SUBSCR_CONN_S_AUTH_CIPH and
re-initiate Ciphering Mode.
To be able to re-enter the Ciphering Mode algo decision, factor it out into
msc_geran_set_cipher_mode().
Rationale:
In the following commit, essentially we stopped supporting A5/3 ciphering:
commit 71330720b6
"MSC: Intersect configured A5 algorithms with MS-supported ones"
Change-Id: Id124923ee52a357cb7d3e04d33f585214774f3a3
A5/3 was no longer supported because from that commit on, we strictly checked
the MS-supported ciphers, but we did not have Classmark 2 available during
Location Updating.
This patch changes that: when Classmark 2 is missing, actively request it by a
BSSMAP Classmark Request; continue Ciphering only after the Response. Always
request missing Classmark, even if a lesser cipher were configured available.
If the Classmark Update response fails to come in, cause an attach failure.
Instead, we could attempt to use a lesser cipher that is also enabled. That is
left as a future feature, should that become relevant. I think it's unlikely.
Technically, we could now end up requesting a Classmark Updating both during LU
(vlr_lu_fsm) and CM Service/Paging Response (proc_arq_fsm), but in practice the
only time we lack a Classmark is: during Location Updating with A5/3 enabled.
A5/1 support is indicated in CM1 which is always available, and A5/3 support is
indicated in CM2, which is always available during CM Service Request as well
as Paging Response. So this patch has practical relevance only for Location
Updating. For networks that permit only A5/3, this patch fixes Location
Updating. For networks that support A5/3 and A5/1, so far we always used A5/1
during LU, and after this patch we request CM2 and likely use A5/3 instead.
In msc_vlr_test_gsm_ciph, verify that requesting Classmark 2 for A5/3 works
during LU. Also verify that the lack of a Classmark Response results in attach
failure.
In msc_vlr_test_gsm_ciph, a hacky unit test fakes a situation where a CM2 is
missing during proc_arq_fsm and proves that that code path works, even though
the practical relevance is currently zero. It would only become interesting if
ciphering algorithms A5/4 and higher became relevant, because support of those
would be indicated in Classmark 3, which would always require a Classmark
Request.
Related: OS#3043
Depends: I4a2e1d3923e33912579c4180aa1ff8e8f5abb7e7 (libosmocore)
Change-Id: I73c7cb6a86624695bd9c0f59abb72e2fdc655131
Store all Classmark information in the VLR.
So, we now always know the Classmark 1 (mandatory IE for LU). This is visible
in the msc_vlr_tests -- they no longer indicate "assuming A5/1 is supported"
because classmark 1 is missing, because we now know the Classmark 1.
Rationale:
During Location Updating, we receive Classmark 1; during CM Service Request and
Paging Response, we receive Classmark 2. So far we stored these only for the
duration of the conn, so as soon as a LU is complete, we would forget CM1.
In other words, for anything else than a LU Request, we had no Classmark 1
available at all.
During Ciphering Mode Command, we rely on Classmark 1 to determine whether A5/1
is supported. That is moot if we don't even have a Classmark 1 for any CM
Service Request or Paging Response initiated connections.
The only reason that A5/1 worked is that we assume A5/1 to work if Classmark 1
is missing. To add to the confusion, if a phone indicated that it did *not*
support A5/1 in the Classmark 1, according to spec we're supposed to not
service it at all. A code comment however says that we instead want to heed the
flag -- which so far was only present in a Location Updating initiated
connection. Now we can make this decision without assuming things.
This got my attention while hacking on sending a BSSMAP Classmark Request from
the MSC if it finds missing Classmark information, and was surprised to see it
it lacking CM1 to decide about A5/1.
Change-Id: I27081bf6e9e017923b2d02607f7ea06beddad82a
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: I1c8122c909938daaf782468c1c5b0262d555c3ce
When the assignment completes a choosen codec is returned. At the
moment we do not use this information.
- add struct members for codec info (both, RAN and CN)
- parse codec info in BSSMAP ASSIGNMENT COMPLETE
- use codec info on mgcp
Since the MNCC API is not complete yet, we currently only use the
codec info only on the internal MNCC yet.
Change-Id: I9d5b1cd016d9a058b22a367d0e5e9f2ef447931a
Related: OS#2728
osmo-hlr has recently (as of Change-Id
Iad227bb477d64da30dd6bfbbe1bd0c0a55be9474) a working shared library
implementation of libosmo-gsup-client.
We can remove the local implementation in osmo-msc and use the
system-installed shared library instead.
Change-Id: I6f542945403cf2e3ddac419186b09ec0e2d43b69
Since we don't process SS/USSD requests in OsmoMSC anymore, there
are some useless GSM 04.80 functions remained from the past.
In particular, this change does the following:
- removes both gsm0480_send_{ussd_response|return_error}
functions because they are not used anymore;
- changes symbol prefix from 'gsm0480_' to 'msc_', in order to
avoid possible conflicts with the libosmogsm's GSM 04.80 API;
- cleans up useless includes;
Change-Id: I2990d8627bce0ce6afb1dcf6b11bb194292380d3
libosmogsm in libosmocore.git from Change-Id
Ie36729996abd30b84d1c30a09f62ebc6a9794950 onwards contains oap_client.c,
so we don't need our local copy here in this repo anymore.
Change-Id: Ib6496c35d0ce6eb531e97129dc45a9f68e503b34
Requires: libosmocore.git Change-Id Ie36729996abd30b84d1c30a09f62ebc6a9794950
This change introduces some new rate counters for call-independent
SS/USSD connections. As OsmoMSC doesn't handle the messages itself,
and only responsible for dispatching messages between both
A and GSUP interfaces, the following is taken into account:
- MS-initiated and network-initiated requests to establish
a NC SS/USSD session (transaction) - "nc_ss:m{o|t}_requests";
- successfully established MS-initiated and network-initiated
SS/USSD sessions (transactions) - "nc_ss:m{o|t}_established".
Change-Id: I23c9475abc9951d82f3342fdc5aaa367836f7741
This change introduces a possibility to establish network-initiated
SS/USSD transactions with a subscriber in either IDLE, or DEDICATED
state. In the first case, a new transaction is established using
Paging procedure. If a subscriber already has an active connection,
a separate new transaction is established.
TTCN-3 test case: I073893c6e11be27e9e36f98f11c1491d0c173985
Change-Id: Ief14f8914ef013bd6efd7be842f81fbf053f02e2
In order to be able to support external SS/USSD gateway, we should
not terminate the GSM 04.80 messages at OsmoMSC. Instead, we need
to follow the GSM TS 09.11 specification, and forward all messages
unhandled by OsmoMSC to OsmoHLR over GSUP protocol.
This change implements forwarding of MO SS/USSD messages. The
forwarding assumes transcoding between GSM 04.80 messages and
GSUP messages. The payload of Facility IE is carried 'as is'.
As a side-effect, this will disable the osmo-msc internal handler
implementing the "*#100#" for obtaining the subscribers own phone
number. In order to re-gain this functionality, you will need a
modern osmo-hlr (Change-Id I1d09fab810a6bb9ab02904de72dbc9e8a414f9f9)
and the following line in your osmo-hlr.cfg:
hlr
ussd route prefix *#100# internal own-msisdn
TTCN-3 test case: I01de73aced6057328a121577a5a83bc2615fb2d4
Change-Id: Ide5f7e350b537db80cd8326fc59c8bf2e01cb68c
Some internal sub-systems, such as SS/USSD or SMS implementation,
may also need to use GSUP connection with HLR. Previously, it was
only available within the libvlr code, and nowhere else.
Let's introduce the generic GSUP message router, which will
receive messages unhandled by VLR itself, and route them to
a handler depending on the message type.
Change-Id: Ib8146ce5788c8f249dcaa39d61bd0388574bf892
The CC sub-layer is fairly self-contained, so let's move it to
a separate C source file. The old gsm_04_08.c file now only
contains the 04.07 / DTAP core and MM sub-layer handling.
I did this initially as an experiment to see how self-contained
our CC implementation really is. Given this rather straight-forward
patch builds fine, CC really is self-contained (yay!).
Change-Id: Idb8dd7a8d9d8b4a28c492f12da3cc3305b695cca
There is no need to pass a pointer to a ss_request struct when
calling the gsm0480_send_ussd_* functions, because they only
use both transaction ID and InvokeID from there, which may
be passed directly.
This change allows one to use this API without parsing the
whole GSM 04.80 message, or when parsing is failed. Moreover,
if InvokeID is not available, one can pass any incorrect,
(e.g. negative) value, so the universal NULL tag will be used.
Finally, setting a TI flag is also up to the caller.
Change-Id: I13d5abbfdcf8238ebaf0566c420f09cd9255b648
This function could be also used by other parts of code, e.g.
by gsm_04_11.c or by gsm_09_11.c, during initialization of
a new transaction. No need to hide it.
Change-Id: I9a9d17fca4901163dae10d76455aa4cf54497156
During a long time, we had both file and symbol names, actually
related to Supplementary Services, with the 'ussd' abbreviation.
This is not absolutely wrong, but isn't correct at the same time.
USSD is a kind of Supplementary Services, this is only a part
of them. There are also 'structured' Supplementary Services,
which can be call related or call independent.
The "Signalling interworking for supplementary services" is
defined by GSM TS 09.11, and this is exactly what MSC should
implement. Let's use the specification number for naming, as
we do e.g. in the GSM 04.11 (SMS) implementation.
Change-Id: Ic1eaceddb58132318e4e941be542da34b8ebefe1
Previously the MSC_CONN_USE token for Supplementary Services was
called 'MSC_CONN_USE_TRANS_USSD'. Non-call related Supplementary
Services is not only about USSD, so let's rename it.
Change-Id: I5b3517c87a32fa64dea6b0c912f2b76c5c25a112
There are error and problem codes defined by GSM TS 04.80:
- Error codes are used when a message is structured correctly,
but something is wrong in context of the current operation.
Usually they are carried by 'Return Error' component.
- Problem codes are used when something is wrong with the
message structure, or with carried values. They are
carried by 'Reject' component.
There are three groups of them (see table 3.13):
- General Problem Codes (table 3.14),
- Invoke Problem Codes (table 3.15),
- Return Result Problem Codes (table 3.16),
- Return Error Problem Codes (table 3.17).
The first group is general purpose, and can be sent in
response to any kind of message, excluding 'Reject' itself.
Other ones are bound to specific component types, such as
'Invoke', 'Return Result' and 'Return Error'.
For some reason, a 'Reject' component with the general problem
code 'GSM_0480_GEN_PROB_CODE_UNRECOGNISED' was always used in
OsmoMSC. Even when the message structure is correct.
Let's properly indicate errors in the following way:
- 'Reject' with GSM_0480_GEN_PROB_CODE_UNRECOGNISED
when the gsm0480_decode_ss_request() fails to decode
a message. It can only return 0 or 1, so it's hard to
guess which exact part of message caused the error.
- 'Return Error' with GSM0480_ERR_CODE_ILLEGAL_SS_OPERATION
when the operation code is not related to USSD.
- 'Return Error' with GSM0480_ERR_CODE_UNEXPECTED_DATA_VALUE
when the requested USSD code is unhandled (not supported).
There is a TTCN-3 testcase for this:
https://gerrit.osmocom.org/9470/
Change-Id: I800e7ec98dc9d0bca2d45a8b8255d60253d63e14
Remove subscribers which fail to send periodic Location Updates from the
list of subscribers known to the VLR. This complements the IMSI detach
procedure: periodic LU expiry triggers an implicit IMSI detach.
Expired subscribers are purged from a periodic timer which iterates
over all subscribers once per minute.
Subscribers with an active connection do not expire. This is controlled
by the subscriber conn FSM which sets a subscriber's the LU expiry timeout
value to GSM_SUBSCRIBER_NO_EXPIRATION while a connection is active.
Add support for fake time with osmo_clock_gettime() to msc_vlr tests.
This functionality existed in OpenBSC but was lost during the nitb split.
This code took some inspiration from the OpenBSC implementation.
Related: OS#1976
Change-Id: Iebdee8b12d22acfcfb265ee41e71cfc8d9eb3ba9
a_reset.c/h was originally developed to be used in both, bsc and
msc without changes. Unfortunately no suitable library has been
found for a_reset.c/h so the file ended up as duplicated code in
both split brances. Eventually we decided to specialize the
generalized code again, which means some of the functions needed
only by osmo-bsc are removed.
- Remove dead code
- Fix timer identification number (T16)
- use fi->priv to hold context info
- Minor cosmetic fixes
Change-Id: I8e489eb494d358d130e51cb2167929edeaa12e92
Depends: libosmocore I36d221c973d3890721ef1d376fb9be82c4311378
Related: OS#3103
The only reason to use int instead of the enum was the lack of header
iu_client.h when not building with Iu support. Rather use the configure result
properly, include the header when Iu support is built and use the proper enum.
Omit the entire iu sub-struct when building without Iu.
Add LIBOSMORANAP_CFLAGS to libvlr, in order to find the iu_client.h header (now
also included from gsm_data.h).
Rationale: Instead of using a questionable typecast from int* to enum*, we can
now use the enum member directly without needing to silence compiler warnings.
Change-Id: Ic9f8bf53f4b605c166e84cd7edd90c10fe7d7a1f
Instead of keeping separate enums for FSM results and translating between those
and the actual 04.08 reject causes that will ultimately reach the MS, just pass
enum gsm48_reject_value cause codes around everywhere.
Collapse some VLR *_timeout() and *_cancel() api to just *_cancel() with a
gsm48 cause arg.
(Hopefully) improve a few reject causes, but otherwise just aim for more
transparent decisions on which cause value is used, for future fixes of
returned causes.
Depends: I6661f139e68a498fb1bef10c266c2f064b72774a (libosmocore)
Change-Id: I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1
When sending a BSSMAP Clear or Iu Release, do not immediately discard the conn,
but wait until a BSSMAP Clear Complete / Iu Release Complete has been received.
Hence we will no longer show in the log that an incoming Release/Clear Complete
belongs to an unknown subscriber, but will still be around to properly log the
release.
Related: OS#3122
Change-Id: Ie4c6aaba3866d6e5b98004e8870a215e8cf8ffc1
Refactor:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
2. Add separate AUTH_CIPH state to the FSM.
3. Use conn->use_count to trigger conn release.
4. Add separate RELEASING state to the FSM.
5. Add rate counters for each of the three Complete Layer 3 types.
Details:
1. Glue the gsm_subscriber_connection alloc to the subscr_conn_fsm.
Historically, a gsm_subscriber_connection was allocated in libbsc land, and
only upon Complete Layer 3 did libmsc add the fsm instance. After splitting
openbsc.git into a separate osmo-msc, this is no longer necessary, hence:
Closely tie gsm_subscriber_connection allocation to the subscr_conn_fsm
instance: talloc the conn as a child of the FSM instance, and discard the conn
as soon as the FSM terminates.
2. Add separate AUTH_CIPH state to the FSM.
Decoding the Complete Layer 3 message is distinctly separate from waiting for
the VLR FSMs to conclude. Use the NEW state as "we don't know if this is a
valid message yet", and the AUTH_CIPH state as "evaluating, don't release".
A profound effect of this: should we for any odd reason fail to leave the FSM's
NEW state, the conn will be released right at the end of msc_compl_l3(),
without needing to trigger release in each code path.
3. Use conn->use_count to trigger conn release.
Before, the FSM itself would hold a use count on the conn, and hence we would
need to ask it whether it is ready to release the conn yet by dispatching
events, to achieve a use_count decrement.
Instead, unite the FSM instance and conn, and do not hold a use count by the
FSM. Hence, trigger an FSM "UNUSED" event only when the use_count reaches zero.
As long as use counts are done correctly, the FSM will terminate correctly.
These exceptions:
- The new AUTH_CIPH state explicitly ignores UNUSED events, since we expect the
use count to reach zero while evaluating Authentication and Ciphering. (I
experimented with holding a use count by AUTH_CIPH onenter() and releasing by
onleave(), but the use count and thus the conn are released before the next
state can initiate transactions that would increment the use count again.
Same thing for the VLR FSMs holding a use count, they should be done before
we advance to the next state. The easiest is to simply expect zero use count
during the AUTH_CIPH state.)
- A CM Service Request means that even though the MSC would be through with all
it wants to do, we shall still wait for a request to follow from the MS.
Hence the FSM holds a use count on itself while a CM Service is pending.
- While waiting for a Release/Clear Complete, the FSM holds a use count on
itself.
4. Add separate RELEASING state to the FSM.
If we decide to release for other reasons than a use count reaching zero, we
still need to be able to wait for the msc_dtap() use count on the conn to
release.
(An upcoming patch will further use the RELEASING state to properly wait for
Clear Complete / Release Complete messages.)
5. Add rate counters for each of the three Complete Layer 3 types.
Besides LU, also count CM Service Request and Paging Response
acceptance/rejections. Without these counters, only very few of the auth+ciph
outcomes actually show in the counters.
Related: OS#3122
Change-Id: I55feb379e176a96a831e105b86202b17a0ffe889
We usually put comments for functions in *.c files, while header
files are usually plain listings of the API without comments.
Change-Id: I6b0d1d9e1a1b1ffb71cb9905e74f6fad2333bb65
In the old days, OsmoNITB couldn't process any SMS that wasn't between
two subscribers on the same NITB.
We've long re-worked the internals in order to process SMS with
arbitrary sender MSISDN (e.g. from SMPP). However, the VTY command
"subscriber ... sms" was never updated, it seems.
Change-Id: I62b17e0a67989484415f0df2c8cb4ff1f94dbf2b
Closes: OS#3151
The DLCI field of the DTAP header indicates the SAPI as well as the
data link (main DCCH or SACCH). We must make sure to use the correct
DLCI when sending DTAP to the BSC.
We achieve this by
* storing the DLCI in the msgb->cb while parsing the DTAP header
* storing the received DLCI (from msgb->cb) in the transaction for
mobile-originated transactions
* using the trans->dlci to sent msgb->cb when transmitting L3
* filling the DTAP DLCI value from msgb->cb when transmitting DTAP
For MSC-originated transactions, we choose a DLCI value corresponding
to the service (SAPI=0 for CC, SAPI=3 for SMS) and store that in
trans->dlci.
Closes: OS#3150
Change-Id: If511b20f52575054cab1346d99a8cb68d827fdbf
The current msc_subscr_con_allocate() was in fact only used by msc_vlr_tests,
while both a_iface_bssap.c and iucs.c did their own duplicate code of
allocating the gsm_subscriber_connection struct. Unify.
Drop the old msc_subscr_con_allocate(), instead add msc_subscr_conn_alloc().
The new function also takes via_ran and lac arguments directly.
The conn allocation will soon be closely tied to the subscr_conn_fsm instance
allocation, so place the new function definition alongside the other
subscr_conn_fsm API, and match its naming ("conn").
Related: OS#3122
Change-Id: Ia57b42a149a43f9c370b1310e2e1f512183993ea
Instead of jumping through hoops to pass the Complete Layer 3 operation that
created this conn via FSM event dispatch parameters, put it right in the
gsm_subscriber_connection struct, where it always belonged.
Move definition of the enum complete_layer3_type to gsm_data.h, where
gsm_subscriber_connection is defined.
Introduce msc_subscr_conn_update_id() to set the complete_layer3_type of the
conn as soon as a Complete Layer 3 message is received.
In msc_subscr_conn_update_id(), already include an mi_string argument to
prepare for an upcoming patch where the FSM will be allocated much earlier when
the Mobile Identity is not known yet, and we'll also update the fi->id here.
The odd logging change in the msc_vlr_tests output uncovers a wrong use of the
osmo_fsm_inst_dispatch() data argument for SUBSCR_CONN_E_CN_CLOSE events: if a
child FSM signals unsuccessful result, instead of the failure cause, it passed
the complete_layer3_type, as requested upon FSM allocation, which was then
misinterpreted as a failure cause. Now a child FSM failure will pass NULL
instead, while other SUBSCR_CONN_E_CN_CLOSE events may still pass a valid cause
value.
Related: OS#3122
Change-Id: Iae30dd57a8861c4eaaf56999f872d4e635ba97fb
'subscr_conn_from' could mean anything: from what, RAN type? BSS identifier? MM
action? Clearly name it as the Complete Layer 3 kind it represents.
Related: OS#3122
Change-Id: I6263a80e6db01c2ca48df6c58b05e2fd19347057
Match osmo-bsc's naming of the subscriber connection's FSM instance; 'conn->fi'
makes more sense anyway than 'conn->conn_fsm'.
BTW, an upcoming commit will do away with the legacy from libbsc/libmsc duality
and firmly glue the conn allocation to the fi.
Related: OS#3122
Change-Id: If442f2ba78d9722b1065ec30c9a13f372b6a8caa
classmark_is_r99() is only used in gsm_04_08.c, move there as static.
rrlp_mode_* is only used in msc_vty.c, move there as static.
Move ran_type_names[] to msc_ifaces.c.
Change-Id: I5381c72af6841829fbc65940fd7d6f4d5cf583df
Drop tall_bsc_ctx; in mncc_sock_init(), talloc the mncc_sock_state from
gsm_network.
In tests or utils, move from using an extern tall_bsc_ctx to a local root
context pointer.
Change-Id: I92c252be1d1e7634f1653de47d37c99d77d9501c
Apply more concise logging categories in each main scope. The bulk goes to
msc_main.c, obviously, while tests and utils get a slimmed down bunch of
logging categories.
Change-Id: I969a0662ba273f3721b6820d02151b7a5b8014b8
From openbsc.git, we still have osmo-msc's VTY definitions spread across
various places. Combine:
- Move the go_parent_cb() and is_config_node() to msc_main.c, drop
common_vty.c.
- Move all of vty_interface_layer3.c into msc_vty.c.
- Move all of common_cs_vty.c into msc_vty.c.
- Move bsc_vty_init_extra() into msc_vty_init().
- Drop some unused definitions
No functional nor cosmetic changes have been made in the moved code, plain
copy-paste moving (even though the unidiff might look like edits in some
places). I might have adjusted some blank lines though.
Change-Id: Ia818c00ab613a19a34080b160d763b55c19f76b1
In trans_free(), call subscr_conn_release_when_unused(), so that we are sure to
clean up after the last transaction is done.
This fixes an error where a conn lingered after a CC failure, because that code
path forgot to trigger cleanup.
Rationale: so far we were triggering the release check after each DTAP dispatch
(compl_l3 and "normal" DTAP), which is sufficient for properly closed
transactions. We also need a check for when a timeout clears an erratic trans.
Adjust test expectation of test_call_mo_to_unknown_timeout to show that the
error is now fixed.
msc_vlr_test_reject_concurrency now sees an additional release checking event
when the SMS transaction is done, which is expected and does not affect the
test otherwise.
Related: OS#2779
Change-Id: I46ff2e9b09b67e4e0d79cccf8c04936f17281fcb
The naming of "bump" was short and made sense to me at the time of writing, but
it is keeping pretty much everyone else at a distance, no-one intuitively gets
what it is supposed to mean.
Clarify by renaming to "release_when_unused".
Adjust test expectations.
Change-Id: I4dcc55f536f63b13a3da29fff1df5fe16751f83a
osmo-msc still uses endpoints that are allocated locally by the
MGCP-Client. Since osmo-mgw now supports the more comfortable,
dynamic variant we should make use of it.
- Replace the endpoint numer allocation by the client with a
wildcarded CRCX. Use the endpoint that is assigned by the
MGW.
Related: OS#2710
Change-Id: Iee3e446b6689626516f01c521abe3d4603cd3e13
Since commit 2483f1b050 the function
gsm48_tx_mm_info() was not called anymore. No MM info messages were
transmitted to phones even if MM info messages were enabled via VTY.
With this commit, we call gsm48_tx_mm_info() after successfully
processing an IMSI ATTACH location update.
Change-Id: Ice5963d84253eb8c803cd2dfa8b25a4db5382827
Related: OS#2850
Define the struct vlr_ciph_result member .imeisv not as a char* but a char[] of
appropriate length, to avoid the need to point to external memory.
Thus fix a use-after-free in msc_cipher_mode_compl(), which defined the
imeisv[] buffer in a sub-scope within that function, so that the .imeisv
pointer was already invalid when fed to vlr_subscr_rx_ciph_res().
Did you notice that the commit summary rhymes?
Closes: OS#3053
Change-Id: I90cfb952a7dec6d104200872164ebadb25d0260d
Add 3-digit flags and use the new RAI and LAI API from libosmocore throughout
the code base to be able to handle an MNC < 100 that has three digits (leading
zeros).
Depends: Id2240f7f518494c9df6c8bda52c0d5092f90f221 (libosmocore),
Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6 (libosmocore)
Change-Id: I82f0016d9512ee8722a3489a3cb4b6c704a271fc
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ibcd1cc38f170895305ae176a5574384c74a33939
The ID will include the type of connection (GERAN_A, UTRAN_IU) followed
by the SCCP conn_id.
This can be used for the fsm instance ID before we know the IMSI.
Change-Id: I4b875772e3994ad3458ee60dbf880604486d9afd
This is another left-over VTY command from the OsmoNITB days.
If such functionality is desired, it must be implemented in OsmoHLR,
but not here.
Related: OS#2528
Change-Id: Icf0897c47388e49ba7886b55acc728a6f7d213fe
OsmoMSC is using whatever reject cause is apropriate in the given
situation. This user-configurable reject cause only had relevance
in OsmoNITB, and hence it is an unused parameter that can be removed
in OsmoMSC.
Related: OS#2528
Change-Id: Ie1f39e706477aaf42051877b52d4b3ae1c5f138e
This belongs into the BSC and has no relevance in the MSC, as the MSC
has no clue about dynamic timeslots.
Related: OS#2528
Change-Id: Iaa41d22db81120572d4cd2c0c4c75d258947a42f
The mncc_rtp_create_pending and mncc_rtp_connect_pending members
were unused, let's remove them.
Related: OS#2528
Change-Id: I417e23ec53323ddd8e1e5d18952566fe8fd6ac24
As in GSM/3GPP networks emergency calls carry no explicit destination
number/address, add a VTY commadn to patch in some destination handler
in the EMERGENCY SETUP before delivering to [internal or external] MNCC.
Change-Id: I7c9f43ba312fadda2b9a9483b3cf50e4abca9599
Having all BSSAP related logs in the "DMSC" category is overly
generic, and dosn't provide useful granularity.
Change-Id: Id1e52dad03840dfd026fb23f3845a8771c8cc308
If the BSC is contacting us for the first time and sending a BSSMAP
RESET, then we should simply ACK that and transition into the
"connected" state, where connection-oriented and connectionless
procedures are permitted.
This patch is a bit large for such a seemingly simple behavioural
change, but the existing data model didn't permit a more
straight-forward implementation.
Change-Id: Ie67e7ed20a6c42afe99bafef96d85a4e083dd057
Closes: OS#2914
Using this argument we can create the state machine in the
"already connected" state, i.e. without starting an outbound
RESET procedure.
Change-Id: Ibf569d57300965cd47084fa0bff54aa67679e2a1
Check and handle gracefully any error which might appear in
osmo_gsup_encode() - mark corresponding functions with
warn_unused_result attribute to make sure this failure is always checked
against.
Change-Id: I4551212011fb0bd898c020a183756ed7a9afb9e5
Related: OS#2864
in the current implementation we still use osmo-bsc_mgcp, which
has many problems and is also obsoleted by osmo-mgw.
integrate osmo-mgw and re-implement the current switching using
an osmo fsm.
Depends: osmo-mgw Iab6a6038e7610c62f34e642cd49c93d11151252c
Depends: osmo-iuh I3c1a0455c5f25cae41ee19229d6daf299e023062
Closes: OS#2605
Change-Id: Ieea9630358b3963261fa1993cf1f3b563ff23538
conn_id is modeled as int, but should be uint32_t.
- change conn_id from int to uint32_t
Change-Id: Ibf14d7c9a547c4eeb873975e7dcddef223e7df46
Related: OS#2769
According to TS 24.007 Section 11.2.3.2.3, it is possible that uplink L3
messages are duplicated in some scenarios, particularly during
assignment/handover procedure.
To avoid L3 entities from seeing duplicated messages, there's a modulo-2
or modulo-4 message sequence counter, based on which the MSC can detect
and suppress such duplicate messages.
It appears that even our unit tests were wrong in that regard so far.
Rather than manually adjusting each and every message, let's make sure
that the sequence number generation always increments as expected, and
that during matching of incoming messages, sequence numbers are masked
out.
Note: the tests will only pass from libosmocore Change-Id
Iec875a77f5458322dfbef174f5abfc0e8c09d464 onwards, due to
gsm48_hdr_msg_type() being broken in earlier versions.
Change-Id: Id15e399ab7e1b05dcd426b292886fa19d36082b1
Closes: #2908
This leads to faster recovery in case of link loss.
It also makes the TTCN-3 test suite run much faster, as each test case
will inherently terminate the GSUP connection.
Change-Id: I16821a26f2c6ff4d0a76926c9212127ab6f6fedf
So far, the administrator had to pick one particular cipher which
would then be used throughout all subscribers/phones. This is a bit
impractical, as e.g. not all phones support A5/3. Extend the VTY
command syntax in a backwards-compatible way to permit for multiple
ciphers.
NOTE: Like the previous code, OsmoMSC does *not yet check* whether
the configured cipher is compatible with the MS capabilities as
reported in CLASSMARK! The network hence might choose an algorithm
not supported by the phone. Fixing this is subject to another patch.
Closes: OS#2460
Change-Id: I79a4e2892eb5fbecc3d84e11dceffb7149db264b
The VLR code seems to have the assumption that there is one particular
algorithm to be used, as opposed to one of a set of algorithms.
What's missing is basically to decide when/where to pick the best
algorithm within the capabilities of the phone (classmark) and the
network configuration (net->a5_encryption_mask). So far, libvlr has no
notion of classmark. Rather, libmsc has.
Why does the VLR care about the particular algorithm at all? The VLR
should probably simply decide if it should use encryption or not, and if
so, the MSC will figure which algorithm to use.
Change-Id: I5ed80ca2086560a5975a758ec568a034a9a8ab89
Delete expired SMS whenever we are done processing an SMS-related signal.
In order to minimize additional latency only one SMS is removed at a time.
Change-Id: I56cbe716e52b679c4b94f6cbb4a171306975be2e
Related: OS#2354
We already delete SMS which have been sent successfully. However, there
are plans to accept SMS for any subscriber in order to fix the problem
described in https://osmocom.org/issues/2354 ("SMSC: Store&Forward not
working for subscribed but unregistered MS").
This means we may end up storing SMS which never get sent, e.g. because
the B subscriber doesn't actually exist. This could lead to a higher
degree of SMS database growth over time, and therefore we need a way
to keep database size under control.
As a first step, introduce a DB function which removes an expired SMS,
and add a VTY command which removes all expired SMS from the DB.
Later commits will build upon this to remove expired SMS automatically.
The SMS expiry time period is currently hard-coded to 2 weeks.
We could make this configurable in the future if desired.
Change-Id: Icd6093b7b5d8db84b19a0aa47c68182566113ee2
Related: OS#2354
osmo-msc still had large amounts of dead code that came along from
openbsc.git. This commit removes a lot of it, mostly stuff relevant
only to the BSC side of things (or even GPRS).
Change-Id: I247def85da2dc3ec461389fb74414a0d964e7e3c
Related: OS#2528
We don't have BSC or GPRS related logging filters here.
This is a leftover from the NITB->MSC split
Change-Id: I05f991d1f5b7f89545521a73d79619bee4111094
Measurement reporting (and the relate feed) are functions of the BSC,
not the MSC. This code should never have been inherited from OsmoNITB
to OsmoMSC in the first place, let's remove it.
Change-Id: I0d57ac214e574e267fa9752daf76566197b9aa64
There appears to have been no input validation whatsoever on MNCC
messages. Hence it was very easy for an external MNCC handler to
crash OsmoMSC, such as in OS#2853
Change-Id: Idaf3b8e409c84564b1eb26d01a19c605f89b14f4
Closes: OS#2853
Currently the SMS database keeps accumulating entries for each SMS.
These entries are never deleted automatically. With this change, we
start deleting SMS which have successfully been sent to subscriber B.
Change-Id: I3749855fe25d9d4e37ec96b0c2bffbc692b66a78
This change removes a few USSD specific declarations, which are
not actually used now, and probably accidentally migrated from
legacy OpenBSC.
Change-Id: Id57a24b92790d3ce0f9c7343d060f511e2b979c7
* move log helpers to generic header
* log subscriber update
It's handy for troubleshooting issues with subscriber update via GSUP
from HLR.
Change-Id: I1958aeeb3ea99831c7e2c5ee9a6b59834baf4520
The expire_lu is never used but is printed for every subscriber. Let's
remove it to avoid confusion.
Change-Id: I6f7ad1670836384d1e6a58f47a13464fdbbf8509
It's not clear cut which code is responsible for canceling pending requests,
since the requests list is kept in vlr_subscr, but sending out Paging does
certainly not belong in the VLR. Place the requests cleanup in gsm_04_08.c.
Add to test_ms_timeout_paging() in msc_vlr_test_ms_timeout.c to verify that a
pending paging is canceled on IMSI Detach.
Change-Id: Ib8874a9d92f02b0826525b55518332f6899688fd
Currently, if there is no reply from the BSS / RNC, a subscriber will remain as
"already paged" forever, and is never going to be paged again. Even on IMSI
Detach, the pending request will keep a ref count on the vlr_subscr.
Add a paging timeout, as gsm_network->paging_timeout and in the VTY on the
'msc' node as 'paging timeout (default|<1-65535>'. (There is a 'network' /
'T3113' in OsmoBSC, but to not confuse the two, give this a different name.)
Add test_ms_timeout_paging() test to verify the timeout works.
I hit this while testing Paging across multiple hNodeB, when a UE lost
connection to the hNodeB. I noticed that no matter how long I wait, no Paging
is sent out anymore, and found this embarrassing issue. Good grief...
The choice of 10 seconds is taken from https://osmocom.org/issues/2756
Change-Id: I2db6f1e2ad341cf9c2cc7a21ec2fca0bae5b2db5
These rx functions are only used for the A interface, hence the names should
not suggest general SCCP rx (which Iu also has).
Change-Id: I6815c3d4dea4c2abfdff1cf0239ada6a9254f351
In case of UMTS AKA, the Kc for ciphering must be derived from the 3G auth
tokens. tuple->vec.kc was calculated from the GSM algorithm and is not
necessarily a match for the UMTS AKA tokens.
To decide (in an upcoming patch) whether to use UMTS AKA derived Kc or the Kc
from the auth vector, the set_ciph_mode() from vlr_ops needs to know whether
UMTS AKA is being used. This could possibly derived from the msc_conn_ref, but
all flags are already available in the vlr_lu_fsm and vlr_access_req_fsm. Hence
add a umts_aka flag to the set_ciph_mode() callback invocation. The VLR FSMs
thus decide whether UMTS AKA or GSM AKA is to be used during Ciphering Mode
Command, which makes more sense than re-implementing the same decision process
in the MSC.
I considered placing the Kc derivation in vlr_set_ciph_mode() and only tell the
MSC's set_ciph_mode() implementation the precise keys it should use, but the
RAN particulars, and whether a Kc is used at all, rather belong with the MSC.
Related: OS#2745
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I983c48347faf4ee1b405d8174b4e006c904157cf
During Set Ciphering Mode on GERAN, it is required to know whether UMTS AKA is
used to decide which Kc to pick. Change static function is_umts_auth() into
public vlr_use_umts_aka(), so future patches can re-use it.
Prepares: If04e405426c55a81341747a9b450a69188525d5c
Change-Id: I85d784c62ecbabdb6186a3dae4dcd554e7921041
a_iface_tx_cipher_mode() is a bit too far away from the VLR to be handling its
ciphering enums. Instead, construct the gsm0808_encrypt_info in the
msc_vlr_set_ciph_mode() callback.
Greatly simplify the sanity checking code: a_iface_tx_cipher_mode() no longer
needs to re-verify the presence of the gsm0808_encrypt_info contents.
Change-Id: Id46f9a513b555d0a481f7124c9984c2b5b196b3e
The bit shifting is performed in gsm0808_enc_encrypt_info(), and must not be
done when populating the gsm0808_encrypt_info struct.
Provide vlr_ciph_to_gsm0808_alg_id() to translate the enum vlr_ciph to the
GSM0808_* constants we need to put in the gsm0808_encrypt_info struct instead.
Related: OS#2745
Change-Id: If75f95e8a5cc8b9979610ce6d746c1f0073ee39a
The lchan related struct members do not serve any useful purpose
in the msc code, since the lchan concept is not in the scope of
osmo-msc. However, if removed te struct size will change which
will lead into shortened protocol messages as well. This is
is detected by osmo-sip-connector and eventually leads into
a reject ofthe shortended protocol messages.
Re add the missing struct members in order to maintain
compatibility
This commit reverts the changes made to mncc.h by commit:
e2f24d53e4
Change-Id: Ia02373a36df7605507ee3de49173a9fd6547b726
When hunting a conn use count bug, it was very hard to figure out who's (not)
using the conn. To ease tracking down this bug and future bugs, explicitly name
what a conn is being reserved for, and track in a bit mask.
Show in the DREF logs what uses and un-uses a conn. See the test expectation
updates, which nicely show how that clarifies the state of the conn in the
logs.
On errors, log them, but don't fail hard: if one conn use/un-use fails, we
don't want to crash the entire MSC before we have to.
Change-Id: I259aa0eec41efebb4c8221275219433eafaa549b
When sub_pres_vlr_fsm_start() is called, it dispatches an event which may in
some cases already cause tear down and free of the parent FSM instance, after
which storing the returned instance pointer in that parent's metadata will use
freed memory. Instead, pass the target pointer to remember the instance at to
sub_pres_vlr_fsm_start() and assign the pointer *before* firing the event.
Explain so in a new comment.
I haven't checked whether that pointer is actually used at all -- this is the
easiest way to fix the use-after-free without getting sucked into semantic
questions.
Change-Id: Ibdc0b64cd12ba3e2b9737e3517d8484e67abcf04
Use ':' as separator, so that no mangled rate_ctr descriptions are allocated.
When '.' is used, the rate_ctr mangling code creates tallocs of mangled counter
descriptors, and hence affects the amount of expected talloc contexts in
msc_vlr_tests.c.
Change-Id: Ib1db8e3dc6c833174f1b0b1ca051b0861f477408
Oliver Smith
Neels Hofmeyr
Philipp Maier
Harald Welte
Pau Espin
Daniel Willmann