Move gsm_data.c and handover_cfg.c to libbsc, where they belong.
This leaves libcommon utterly empty, drop it.
Change-Id: I6178061fa30c7e1a4c22c29d3c8f508b1033569f
The separation of gsm_data_shared.* from gsm_data.* historically allowed
compiling parts of it into osmo-bts, which we have dropped since (osmo-bts has
its own copy now). Even though gsm_data.* now becomes rather large by it,
remove the legacy separation to get rid of the "shared" naming, which is no
longer meaningful. A future patch might separate into meaningful smaller bits,
if we get the time.
Change-Id: Ie247bc492efb331871d970c56700595ad3f7e201
Provide concise log categories for each main scope.
Move the complete log categories 1:1 to osmo_bsc_main.c.
In bsc_nat.c, omit obviously unused log categories.
In tests, omit almost all log categories, except for those explicitly tested as
the expected output.
Note: should any logging occur for a log category that is omitted by accident,
such will end up being logged as DLGLOBAL, so it will show up and we can fix
it, and it will not get lost silently.
Change-Id: Ib524e49ec211662e0dfde8161495a72aa8ad76cf
The IMMEDIATE ASSIGN REJECT message contains a wait indicator which
tells an MS requesting a channel to wait for a specified amount of
time before trying to request a channel again, i.e. the wait indicator
controls the T3122 timeout value in the MS.
Previously, the wait indicator was fixed to 10 seconds.
This is not sufficient if there are a lot of MS requesting channels
because the MS will retry too soon. Instead of using a fixed value,
maintain a dynamic wait indicator value based on average channel load.
The load (used vs. available channels on a BTS) is sampled once per
second, and once 8 samples have been collected we update a BTS-specific
T3122 wait indicator based on the measured load.
While the wait indicator could go up to 255 seconds, this initial
implementation keeps it in the range from 10 to 128 seconds.
Further experimentation and testing will show whether higher wait
indicator values are desirable, if the sampling rate needs to change,
or if the function mapping the load measurement to a wait indicator
value should change (currently we map the load average linearly into
the range [10, 128] inclusive).
Change-Id: I57e38f6d6ba3b23cc6e1f9520b90261dbb1f1cec
Related: OS#2592
This member was merely a cache for conn->lchan->ts->trx->bts,
so let's avoid having to keep copies of the same data (which needs
to be kept up to date).
Change-Id: Id3bff8b18425ef5d45eb460ac9eb620023013ba0
This error message is now contained in a loop, and the current iteration
does not know whether paging will fail entirely or if later iterations
will succeed. Update the error message accordingly.
This also makes the error message consistent with the one in page_cgi().
Change-Id: I8ec229702343343dedcbb242b6d0ed170c858511
The given value is 10 * ms, so 13 is used instead of 128.
If T3105 is set at config to something greater 0, it is used instead of
the default value.
Adjusst nanobts_omlattr_test.c accordingly.
Change-Id: I3d9687619ba4de35f5d2eff3026d903534b2bbd4
It is desirable to allow configuring handover for each individual network cell.
At the same time, it is desirable to set global defaults.
Treat the 'network' node handover parameters as global defaults, add another
set of parameters for each individual BTS.
This raises questions on how the 'network' node should affect the individual
BTS. The simplistic solution would have been: on creating a BTS in the config,
just copy the current defaults; with serious drawbacks:
- tweaking any parameter in the telnet VTY on network node will never affect
any running BTS.
- network node defaults *must* be issued before the bts sections in the config
file.
- when writing a config back to file, we would copy all net node defaults to
each BTS node, making the network node configs pointless.
Instead, add a handover_cfg API that tracks whether a given node has a value
set or not. A bts node ho_cfg gets a pointer to the network node config and
returns those values if locally unset. If no value is set on any node, use the
"factory" defaults, which are hardcoded in the API. Only write back exactly
those config items that were actually issued in a config file / on the telnet
VTY. (ho_cfg API wise, we could trivially add another ho_cfg level per TRX if
we so desire in the future.)
Implement ho parameters as an opaque config struct with getters and setters to
ensure the tracking is always heeded. Opaqueness dictates allocating instead of
direct embedding in gsm_network and gsm_bts structs, ctx is gsm_net / bts.
This is 100% backwards compatible to
old configs.
- No VTY command syntax changes (only the online help).
- If a 'bts' sets nothing, it will use the 'network' defaults.
- The 'show network' output only changes in presence of individual BTS configs.
On 'show network', say "Handover: On|Off" as before, iff all BTS reflect
identical behavior. Otherwise, output BTS counts of handover being enabled or
not.
Use the same set of VTY commands (same VTY cmd syntax as before) on network and
BTS nodes, i.e. don't duplicate VTY code. From the current vty->node, figure
out which ho_cfg to modify.
For linking, add handover_cfg.c (the value API) in libcommon, while the
handover_vty.c is in libbsc. This is mainly because some utility programs use
gsm_network and hence suck in the ho stuff, but don't need the VTY commands.
Review the VTY online help strings.
Add VTY transcript test for handover options, testing config propagation from
network to bts nodes, 'show network' output and VTY online help strings.
(Needs recent addition of '... !' wildcard to osmo_interact_common.py.)
I considered leaving parts of this more readable, but in the end decided for
heavy use of macros to define and declare the API, because more values will be
added in upcoming patches and I want to prevent myself from messing them up.
Inspired-by: jolly/new_handover branch, which moves the config to 'bts' level
Depends: I7c1ebb2e7f059047903a53de26a0ec1ce7fa9b98 (osmo-python-tests)
Change-Id: I79d35f6d3c0fbee67904378ad7f216df34fde79a
We can now either page an invidual BTS directly or page several BTS in a
given location area. This decision is taken based on the contents of the
cell identifier list in the paging request. Select a set of BTS for paging
while processing the cell identifier list, rather than requiring the
paging layer to loop over all BTS in the MSC.
This change requires some adjustment in bssap_test. In particular,
this test must now add a BTS to its network in order to pass.
The purpose of this change is to make the layering a bit cleaner.
There is one functional change: We no longer abort paging if paging fails
for a particular BTS. Instead, we keep trying to page on other BTS.
Change-Id: Ic1c72c7f83e53988eb9fedf314b1dc459836833d
Suggested-by: Harald Welte
Depends: Ic7772e75c3d7fb0df6e17e118bb33b3248352d4d
Related: OS#2753
The stow-enabled jenkins builds are currently failing like below:
make[3]: Entering directory '/build/src/libcommon'
CC bsc_version.o
CC common_vty.o
CC debug.o
CC gsm_data.o
In file included from debug.c:34:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
In file included from common_vty.c:27:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
In file included from gsm_data.c:37:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
Let's make sure the common gsm_data.h have all required CFLAGS to compile.
Change-Id: I30b75db6ffba227b05b5413b84b15f69e0c213f2
This avoids potential licensing incompatibility and makes integration of
Debian packaging patches easier.
The libosmocore version requirements are fine already but for jenkins
tests to pass we have to have Ic77866ce65acf524b768882c751a4f9c0635740b
merged into libosmocore master.
Change-Id: Ia57bf1300525cf3c247284fe966b1c415c2d53e2
Related: OS#1694
don't mock them, simply call the respective functions to get
a gsm_network and a gsm_bts with all its subordinate members.
Change-Id: I8bdf009d3c7e2473dd42da02762039a19430d6ce
libosmo-sccp is the old sccp-lite-focused SCCP implementation that we
used before libosmo-sigtran was created. The new osmo-bsc in this
repository is using libosmo-sigtran and shouldn't be using parts of
libosmo-sccp anymore.
We only keep it around in configure.ac and Makefile.am for osmo-bsc_nat,
which is not even built in this repository anymore (or 'again yet'?)
Change-Id: I8f274be7d196cd7a5b1ec9ada949130fb06e984d
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
The ipa.py has been moved to osmo-python-tests as osmo_ipa - use it for
vty and ctrl tests instead of local copy. The soap.py and twisted_ipa.py
are not BSC-specific: leftovers from repository split which are now
available in osmo-python-tests as well.
Change-Id: Ia4285b18b152b070c148228604d1e61a8adedba1
Recent change lin libosmocore disallow registering rate_ctr with the
same name and indexing multiple times. To accommodate to this:
* allocate network struct once and use it for all tests
* deregister rate_ctr group after each test
* free bts struct after each test
Related: OS#2757
Change-Id: Ie1537a1ee9ee812eaaf9f58dc4bc86d4add8c31f
According to the spec it's an empty 1-byte element reserved for future
extension but we still have to generate padding properly. Add stub
function similar to the used for SI2ter and adjust test output
accordingly.
Related: OS#2711
Change-Id: I3c278c57880a173df3c4648c9724339d23ce94fd
Previously we simply omitted SI2ter Rest Octets which is spec violation
which lead to 'Malformed Packet' error in Wireshark RSL dissector. Fix
this by generating empty 'no rest octets' with proper padding. Adjust
test output accordingly.
Change-Id: Ie4419aaaf93a462f501f8d8f7bf2677d37c58f94
Fixes: OS#2711
* check GPRS state: if GPRS is enabled for the BTS but NSE, CELL or both
NSVC are locked than report it as degraded
* check TRX usability: use already available function to check that TRX
is actually usable when reporting OML status via CTRL
* fix tests linking: libbsc is using gsm48_create_mm_serv_rej() which is
defined in libcommon-cs but neither libbsc itself nor tests using it
are actually linked against libcommon-cs
Related: OS#2486
Change-Id: I9dce1d3b0cabe149a90cfca58a3fe55f8d6a72bc
According to documentation (and personal experience), AM_PATH_PYTHON
selects the highest version of python, no matter if major version is
different, which means if both python2 and 3 are available, 3 will be
chosen an PYTHON will point to "/.../python" which is python3. Apparently,
the macro cannot be easily used to pick highest python2 version.
As {vty,ctrl}_test_runner.py require python2 and are incompatible with
python3, let's instead rely on the system having a "python2" binary
available, which is the case in most distros.
Change-Id: Id22e157d1bee453babdfa7ed04c506390b0f17bb
After the bssap test in Ie934c5d229140a89763bf2efff86d6a3766cd351, the
subsequent commit Ia2882b7ca31a3219c676986e85045fa08a425d7a was not tested
against the latest head, and its breaking bssap_test was not caught.
Fix current master of osmo-bsc's 'make check' target: add osmo_bsc_mgcp.c and
libosmo-mgcp-client dependencies to bssap_test linkage.
Change-Id: I28719d267452f66d65581c43433e24a9f46cf7dc
3GPP TS § 08.08 defines various types of Cell Identifier List IEs, but we only
implement "entire BSS" and "one LAC". If the MSC sends a Cell Identifier List
that we don't implement, it is best for interoperability to page the entire BSS
and post a log message instead of rejecting the paging altogether. Apart from
resource management, it is not harmful to page more than the MSC requested; if
use of resources becomes an issue, the log message will guide towards the
solution of providing an actually implemented Cell Identifier List IE.
Upon IE length that is other than we expect, log the error, but also fall back
to paging the entire BSS. Overall message length correctness has been checked
earlier.
The particular case observed is that a Huwaei MSC sends a LAI for Cell
Identifier List (MCC+MNC in bcd, followed by a LAC), parsing of which we may
want to add later.
Improve logging: identify the subscriber that is being paged.
Coding style: use a switch() statement to clarify flow and provide a place to
add more implementations later.
Add regression test bssap_test.c: fabricates BSSAP Paging messages with the two
implemented Cell Identifier List IEs as well as the unimplemented LAI
identifier, verify the resulting paging LAC in wrapped function and stderr.
Change-Id: Ie934c5d229140a89763bf2efff86d6a3766cd351
The test clearly fails unless bts->network is set correctly. Not sure
why this hasn't shown up before?
Change-Id: I47786ed06ff610213d7a0b56d0ebf1c537cd7568
Previously if we ran out of space while adding EARFCN, we simply return
which might result in malformed SI2q. Fix it by proper rollback of
entire EARFCN. While at it, let's be paranoid and introduce extra checks
against integer overflow in budget calculations.
Change-Id: I4b2aa3825e9affb6dfeadecdf24dd1a43a92b7b7
Related: OS#2357
* fix insert routine to keep the list sorted by UARFCN
* fix rest octets generator to properly account for offset
* adjust test results accordingly
Change-Id: I443c5c5f937b490578354f3c8a0c5b92629f2794
Related: OS#2357
* remove checks for non-existent tests
* always enable bsc and nat-trie tests because both are built
unconditionally
* enable gsm0408 test which was removed by mistake
* adjust gsm0408 test output to remove SMS-related results
Change-Id: I73ad079a6333ba56e73b7c4d1d0e9c8255c2a03b
Related: OS#2257
This adds a test case to explicitly verify the BA-IND is as expected
by the behaviour introduced in Change-Id I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Related: OS#2525
Change-Id: I3e5b260af97ce96a221e4d51f6c1b41d58817a59
In masurement reports sent by the MS, this can then be used to correlate
if a given measurement report was in response to a BCCH/neighbor list
received on BCCH (SI2xxx) or on dowlink SACCH (SI5xxx).
Closes: OS#2525
Change-Id: I1cd0dc51026dcd0e508e63eea4e333e6b184787a
Fix three instances of VTY tests working because it used to include implicit
'exit' commands to the parent node.
Since libosmocore change-id Id73cba2dd34676bad8a130e9c45e67a272f19588 = commit
d64b6aed235f6e4d84a2cb8e84b32c3179260254, we no longer do this implicit-exit in
interactive VTY shells.
*) in testPingPongConfiguration, the intention is to enter the /msc 0 node.
Drop prior entry of the 'network' node, which looks like an oversight. So
far the 'msc 0' caused an implicit 'exit' and thus worked, now fails.
*) Two instances following comments "# Check searching for outer node's
commands", which look like they are intended to check for this implicit-exit
behavior. This is obsolete, drop those parts of the tests.
Change-Id: I77931d6a09c42c443c6936000592f22a7fd06cab
This is the OsmoBSC project. Disabling the build of the BSC would be
somewhat odd, so let's remove the option.
Also, OsmoBSC depends on libosmo-sccp now, so we must unconditionally
depend on it. As a result, we can remove the --enable-nat option,
as this was only to avoid a mandatory libosmo-sccp requirement in
historical times.
Change-Id: Icfee8a904d33b7c13ab8d185d64fb5c2337d8640
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
Remove libiu here, use the functions from libosmo-ranap instead, by applying
the ranap_ / RANAP_ prefix.
Corresponding change-id in osmo-iuh.git is I6a3f7ad15be03fb94689b4af6ccfa828c25f45c0
To be able to run the msc_vlr tests for RAN_UTRAN_IU without Iu client headers
available, add iu_dummy.h, containing mere function signatures that match
iu_dummy.c and a mostly empty struct ranap_ue_conn_ctx.
Make sure we can build with and without --enable-iu: include osmo-iuh headers
only with --enable-iu.
Change-Id: Ib8c4fcdb4766c5e575618b95ce16dce51063206b
This was originally a long series of commits converging to the final result
seen in this patch. It does not make much sense to review the smaller steps'
trial and error, we need to review this entire change as a whole.
Implement AoIP in osmo-msc and osmo-bsc.
Change over to the new libosmo-sigtran API with support for proper
SCCP/M3UA/SCTP stacking, as mandated by 3GPP specifications for the IuCS and
IuPS interfaces.
From here on, a separate osmo-stp process is required for SCCP routing between
OsmoBSC / OsmoHNBGW <-> OsmoMSC / OsmoSGSN
jenkins.sh: build from libosmo-sccp and osmo-iuh master branches now for new
M3UA SIGTRAN.
Patch-by: pmaier, nhofmeyr, laforge
Change-Id: I5ae4e05ee7c57cad341ea5e86af37c1f6b0ffa77
Commit 058cd573d8 added 2 new pointer parameters to
gprs_subscr_request_auth_info, but forgot to update wraps of the
function in sgsn_test.
I catched this today because openbsc build test sgsn_test was failing.
Closed look up to the logs showed:
Assert failed (auts != NULL) == (auts_rand != NULL) openbsc/openbsc/src/gprs/gprs_subscriber.c:791
Change-Id: Ie9e4af6da0339536fb20ca0b7bbcf6f485bd522c
In 2015, Jacob moved/copied related functions to libosmocore, but
for some reason didn't remove the copies here. Let's follow-up on
that and remove duplicated code.
The libosmocore commit introducing osmo_apn_to_str() was
8114294bf29ac6e44822c0ae43d4b0819f11b022
Change-Id: I7315ffcbed8a54cca2056f313bb7783ad82d0ee9
Fixes regression probably introduced in c696cc28.
For bts>0 logging doesn't show bts number correctly when printing lchan
identification string - it will always show it as "bts=0". The reason for
this is that the identification string is cached before bts->nr value is
set to a proper value.
This patch sets bts->nr as part of the first step of the bts structure
initialization, before caching happens thus making sure the cached
identification string is cached with the correct values.
Change-Id: I61c18a7f021fcb1ec00d34a745f4e3ab03416c2d
SMPP DELIVER_SM messages with esm_class = Delivery Receipt need to send
this message reference (that the mobile phone allocates) to the ESME.
Thus, the ESME propagates it via SUBMIT_SM with esm_class = Delivery
Acknoledgment so that the SMSC sends the GSM 03.40 status-report to the
origin including this. Given this field is useful for status-reports, we
need to store it in the HLR database.
Moreover, we need a new field that specifies if the entry represents a
SMS status-report, to do the right handling from the gsm411_send_sms() -
such new handling comes in a follow up patch entitled "libmsc: handle
delivery ack via SMPP SUBMIT SM / send GSM 03.40 status report".
This patch includes the migration routines to the new database schema
revision 5, it's quite a bit of dbi boilerplate code - copied-pasted and
adapted.
Change-Id: I7276d356d805a83ebeec72b02c8563b7135ea0b6
For the vty tests, add osmo-sgsn-accept-all.cfg (that does not need an HLR) and
use in vty_test_runner.py, otherwise the 'show sgsn' command will reply that it
could not connect to the HLR, failing the vty test which expects empty.
Change-Id: Ie3b2013198d3e2b780a4e31c36b89b58129dcacd
On incoming 04.08 messages, we log only the protocol discriminator in
decimal. Enhance: log pdisc and message type in hex, and also log the
protocol and message type as human readable string.
Also adjust the msc_vlr tests' log statements for wrapped rx/tx functions
of dtap from/to the MS.
Adjust the expected output of msc_vlr_tests.
Change-Id: Ida205d217e304337d816b14fd15e2ee435e7397d
Depends: libosmocore change-id I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
libosmocore change-id I4efdb1eaae43aced33961b64d4f14b0040321c10 changes the
gsm340_gen_scts() from gmtime to localtime, meaning that by feeding a mere zero
as timestamp, we get different results depending on the local machine's
timezone setting. Instead of calling gsm340_gen_scts() with zero, simply write
a bunch of bytes as time so that the tests get identical SMS bytes every time.
Change-Id: I8a50e8963dce80609749571b61fc6ffe1c54660c
Neels Hofmeyr
Harald Welte
Pau Espin
Neels Hofmeyr
Philipp Maier
Daniel Willmann