* MGCP-over-IPA handling in MSC_ConnectionHandler means we need to use
the new MGCP_CLIENT_MULTI port since we'll be managing MGCP messages
from 2 different UDP connections, and we need to be able to route
answers correctly. As a result, parameter multi_conn_mode is enabled for
SCCPlite and all code adapted to use that port in that type of scenario.
* iDuring calls when on SCCPlite, send a full (all-required-params-in)
CRCX through the MGCP-over-IPA connection towards the BSC in order to
emulate the MSC, and expect the correct answer back. This way we test
BSC funcionality to forward MGCP messages coming from MSC works as
expected.
Related: OS#2536
Depends: osmo-bsc.git I38ad8fa645c08900e0e1f1b4b96136bc6d96b3ab
Change-Id: I31fed700772dd0b063f913b1e1639fd428c46e7d
Move logic handling CRCX and MDCX to function, so they can be reused for
other ports in forthcoming commits.
Change-Id: I07344657c5d1465a8e0c278adb76150ca7f449ba
Previous to this commit, BSSAP Reset (Ack) messages contained Osmux
Support IE even if transport was SCCPLite, where those IEs are actually
meaningless.
Change-Id: If6cc0f65a0f273297a4523e5d6a7564d966f0aa6
This will allow RAN_Emulation to have better knowledge on the protocol
stack in use, and behave differently based on that information.
For intance, forthcoming commit will append OsmuxSupport IE only if
transport is BSSAP AoIP.
Change-Id: Ife62e328af2d3f2475ff93249f2138820c7ddabb
Some of our files didn't have a copyright notice at all, let's add
it. Also, update the notices in other files and ensure a SPDX
identifier is present in all but the most trivial files.
Change-Id: If7fa19ce484b415bc645e39b3d0d666b44b5f0fd
Test verifies once osmux is enabled in osmo-bsc, BSSMAP RESET (ACK)
contains Osmux Support IE and that it correctly handles BSSMAP ASsign
Req with Osmux CID.
Related: OS#2551
Depends: osmo-bsc 6de754cdde5319af3059d8fc6abf85037ec7eacc
Depends: titan.ProtocolModules.BSSMAP Iaf1e137269c0da20b2c96fd104b57edf336693af
Change-Id: If69c716dc06d61d810c32d1720a237c7535baca8
The RAN_Emulation currently unconditionally provides BSSAP and MGCP support.
Let's re-structure the code so that support for those protocols is now
possible to enable/disable at compile time.
This patch is in preparation of introducing RANAP support in RAN_Emulation.
Change-Id: Id53ba3ff05f9946230e0e4a759245de14a0f9fbd
Related: OS#2856
So far, BSSMAP_Emulation supported only a transport over BSSMAP.
However, we soon intend to merge support for RANAP in order to
simulate RANAP/Iu connections as well as BSSMAP. Let's start
by renaming some of the existing types/functions/ports/modules
without introducing any functional changes just yet.
Related: OS#2857, OS#2856
Change-Id: Iecbcb0c6c136baad9460eca40606bb4010d8882d
The handling of the AMR rate configuration bits S15-S0 is currently only
superficially checked. Lets add more some more elaborated testcases to
check through varios different situations. Also make sure that the
resulting mr configuration IE is verified
Change-Id: Ica323deb9836deea72982e093c9cb31deb5a216b
Related: SYS#4470
Previously the expectations for number of CRCX and MDCX messages from
MGW was adjusted unconditionally for LCLS tests. However this is only
necessary for MGW-loop type of LCLS. Use explicit variable (with default
value preserving current behavior) to decide whether to apply this
adjustment or not. This simplifies support for other kinds of LCLS
loops.
Change-Id: I07b2c56991977b5e80c372a5b8338f348f14c076
Related: OS#3659
Instead of vaguely allowing any release messages to be present or not, exactly
pinpoint for each test case the exact release messages expected during lchan
release.
Related: an osmo-bsc change broke sending of RR Release messages, which was
utterly ignored and hence not caught by ttcn tests. That must not happen again.
I am not actually sure that these expectations are 100% correct; if errors
become apparent, we shall change the expectations in ttcn3 and then fix
osmo-bsc according to that.
Adjust f_expect_chan_rel() and callers,
and the Assignment procedures (as_assignment and f_establish_fully).
The current state of the bsc tests should all pass with osmo-bsc
Id3301df059582da2377ef82feae554e94fa42035
Related: OS#3413
Change-Id: Ibc64058f1e214bea585f4e8dcb66f3df8ead3845
Allow osmo-bsc sending a Deact SACCH messages in most cases. Prepare the
ttcn3-bsc-tests to not break just because of those messages that will soon be
sent.
When releasing an lchan, it makes sense to Deactivate SACCH on it, if it was
ever active. So far osmo-bsc was fairly reluctant to send Deactivate SACCH, but
osmo-bsc Id3301df059582da2377ef82feae554e94fa42035 is about to change that.
In most test cases, Deact SACCH are still optional, but in one case, the
current missing Deact SACCH will introduce a test failure: in the 'interleave'
of BSC_Tests.TC_ho_out_fail_no_ho_detect.
As soon as abovementioned osmo-bsc patch is merged, the test will pass again.
Also, as soon as Ibc64058f1e214bea585f4e8dcb66f3df8ead3845 is merged here, the
bsc tests will properly ensure whether Deact SACCH is sent or not in all tests.
Change-Id: I27da24dbe3184fa7a076a35f6fa6af457c1db8d2
Unfortunately all component.stop can not be called from the non-mtc
component. f_shutdown is a wrapper that will try to shutdown a test in
the best way calling all component.stop if it is called from the mtc and
just stopping the mtc if called from any other component.
Change-Id: I9b71f7f7bd70d2da21fbad60c340d5bf8b3b9536
Most differences between sccplite and AoIP are visible during the
assignment. The current implementation checks for the presence of a CIC
in the ASSIGNMENT REQUEST in order to detect if the communication should
be modeled by AoIP or sccplite. This method is error prone and does not
work very well in situations where only signalling is used, because
there in sccplite and AoIP no CIC or AoIP trasp. identifier is present,
so there is nothing to check on. To resolve this we need an explicit way
to tell the MSC_ConnectionHandler that it has to behave like an AoIP MSC
or like an sccplite MSC.
- Add an aoip flag to TestHdlrParams
- Make sure BSC_Tests.ttcn sets the AoIP depending on mp_bssap_cfg.transport
Change-Id: I800249e783deb018d99e81d814843e0574a5c69b
Related: OS#3639
Since our BSC implementation supports AoIP, the COMPLETE LAYER 3
INFORMATION message must contan a Codec List (BSS Supported) information
element. The test currently just receive a L3 compl Template and then
continue. This is implemented without an altstep. So lets have an altstep
with timeout here and make sure that the codecList information element is
always included.
However, since AoIP was specified after sccp-lite, we need to make sure
that for sccp-lite configurations, the Codec List is not included.
- Check L3 compl message using an alt-step
- Make sure codecList is always included (for AoIP)
Change-Id: Ia16a454e78421430ec32cc37939d429970cb06ec
Related: OS#3548
Add f_gen_handover_req() like f_gen_ass_req(), to match AoIP or SCCPlite
requirements.
For incoming HO, MSC_ConnHdlr needs to know the SCCP addresses to expect the
incoming SCCP Connection from MSC to BSC. Add 'handover' section to
TestHdlrParams, and pass in the addresses from test_CT via that.
In osmo-bsc.cfg, add a remote neighbor config, so that the VTY command
'handover any to arfcn 123 bsic any' can trigger an outgoing inter-BSC HO.
Add various BSSMAP handover templates to BSSMAP_Templates.ttcn.
Add RR Ho Command template to L3_Templates.ttcn.
Move ts_BSSAP_Conn_Req() from msc/BSC_ConnectionHandler.ttcn to
library/BSSMAP_Emulation.ttcn, so we can also model an SCCP Connection Request
in BSC_Tests.ttcn (this time from MSC to BSC).
Add the two new tests to bsc/expected-results.xml.
Related: OS#2283
Change-Id: Id22852d4be7f127d827e7a8beeec55db27c07f03
When the altstep in f_establish_fully() gets an unexpected ASSIGNMENT
FAIL or COMPLETE it should stop completely like it is already
implemented in many other altsteps.
Change-Id: Ib4ac7bcbac35a4ae454d1806f3fbb727834d18b7
Call mtc.stop after setverdict(fail), add reasons to most failures and
fail with verdict error for internal errors.
Change-Id: I9b618235939fa41160b9be6677b121963d3ec857
The IPACC and MDCX interaction happens nearly in parallel to the
normal RSL connection that handles the handover, in particular the
channel relase from the old BTS may arrive in between IPACC and MGCP
operations.
- When the channel release arrives, check if MGCP and IPACC
operations are done (we have seen one MDCX on MGCP and an CRCX
plus an MDCX on IPACC level)
Change-Id: I207e9ece48ec53f872f82d981435cee7c2d0b094
Related: OS#3396
The function f_check_mgcp_expectations() checks the counters that
count the occurrence of MDCX and CRCX messages against computed
expected values. At the moment it is not easy to spot where exactly
the deviation occurred. Lets add some log output so that we can see
which type of message on which connection was missing or too much.
Also add a string parameter that is set to the calling functions
name so that we know from where the check has been triggered.
- Add more verbose log output for counters
- Add parameter to prepend to the log line
Change-Id: Ida0eba4ef3c1db977d392267ef76ec37b87133b3
Related: OS#3292
The function f_establish_f_establish_fully does not yet handle the
case where calls get switched locally. In those cases we expect to
see one additional MDCX before the BSSMAP ASSIGNMENT COMPLETE is
sent.
- Check exp_ass_cpl if the call is expected to be LCLS and expect
another MDCX for those cases.
Change-Id: I55fae5ab03980cd810ed7dc38208550686b1659e
Related: OS#3292
as_media handles the MGCP interaction for most of the tests. However,
it does not make sure if transactions are missing or if too many
transactions are performed (e.g. if an SCCP-Lite tests still creates
the connections pointing to the core network, even if they must not
created by the BSC in this case). So lets make sure that the MGCP
transactions are performed as expected by counting them.
- Add counters to count CRCX and MDCX transactions
- Check those counters after call establishment and handover
Change-Id: Ib073b097a840ca3a8ee99c4ed41f59f574191d98
Related: OS#3292
as_media() tests both, IPACC/RSL media handling and MGCP media
handling. These two domains are technically quite separate, which
means we can split them up into two separate altsteps in order
to increase readability of the code.
- Split as_media() into as_Media_ipacc() and as_Media_mgw()
Change-Id: I539e8ffdb9f99d5a8e730dd918df502614b9e84d
Related: OS#3292
The current osmo-bsc refactoring causes an erratic MR Config IE. This patch
ensures that the ttcn3-bsc-tests catch this error.
Add MR Config IE expectations to g_pars, set these in the two tests that expect
an MR Config IE in the Chan Activ message:
BSC_Tests.TC_assignment_codec_amr_{f,h}
All other tests now verify that there is *no* MR Config IE in RSL Chan Activ
messages -- all other tests request no voice or a non-AMR codec for Chan Activ.
Change-Id: Ie841feed9d5e478bab1fea2bb86f300e84799013
The test currently use a hardcoded payload type and encoding name.
This does mean in practice that even when an assignment with EFR
is happeining. The MGCP responses to the BSC tell that the codec
is AMR. This is not correct. The testcases should always pick a
suitable payload type / encoding name in the MGCP response
- Add constants for IANA/3GPP assigned payload types
- Add function to lookup the right encoding name for a payload type
- Initalize the encoding name and payload type in g_media according
to the BSSAP PDU.
Change-Id: I2735267091059e2f2169da80bdcd30abc2b1554b
Realted: OS#2728
Until now, the test went from RR Handover Command directly to RR Handover
Complete, and osmo-bsc didn't mind it. However, the normal handover procedure
requires an RSL Handover Detect to be sent in-between those. Send that.
Change-Id: I6e54edcc3a99e116d852eca8e48c7a5bc685e832
When f_ass_patch_lcls() was recently introduced during LCLS support
patches, we broke any testcases that *expected* an ASSIGNMENT FAIL
by overwriting the ASSIGNMENT FAIL with an ASSIGNMENT COMPL.
This patch fixes f_ass_patch_lcls() to only patch 'assignmentComplete'
members, if this assignmentComplete is actually chosen.
This fixes BSC_Tests.TC_assignment_fr_a5_1_codec_missing
Change-Id: I64fbf4cc3178a91913143960475a0d3758779ced
This is an early WIP, we actually will need to establish two calls/legs
before the BSC is able to locally correlate them.
Related: OS#1602
Change-Id: Ie6d0b9c38027abf65c7c564fc79b889d013fa6a7
The helper function f_establish_fully() checks the channel type
for compatibility. If the channel type is compatible with the
desired mode a channel mode modification could be necessary if
the current channel mode is different from the desired channel
mode. However, this is not checked at the momemend. We just
blindly expect a MODE MODIFY message from the BSC and ignore
the cases where the current channel mode and the desired channel
mode already matches up. This is the case if only a signalling
channel is requested with f_establish_fully for example.
- Check if the channel mode of the current channel and the
desired channel mode match up.
- Make sure that the MODE MODIFY from the BSC is only
expected when the channel modes are different.
Note: The function f_channel_needs_modify() that is used
to determine if a channel modification is needed or not
does not cover all cases yet. (see fixme note)
Change-Id: I9004f299220b01ecea6b2316ba3f913c316947dc
Closes: OS#2762
Related: OS#2936
If it's a pure signalling procedure (like LU), the MSC will never
even send a BSSMAP ASSIGNMENT CMD. Our test suite should be able
to produce this kind of behavior by passing "omit" as assignment
comamnd to the f_establish_fully() function.
Change-Id: I9bb5c8c19518905cf1ce121aa0b433886ec594d5
Make sure that the "tag" member of the RslChanelNr sub-structure
is always initialized. This can be achieved without any extra code
by using the existing templates rather than hand-coding it.
Change-Id: I990ac8ac0ce51e11f1d683382c9fc2d4e1201aa7
The problem is that Junit-XML doesn't have a mapping for inconclusive
results, and hence they show up as 'passed'.
By introducing this change, we make sure all tests that don't pass
show up as failed.
Change-Id: Iddd13d0055c91f9bd304ce9833fba0485abf4c4e
The altstep as_handover does not exit as each of its branches is
equipped with a repeat statement on the end. This trapps us in
an endless loop.
- remove the repeat statement at the last logical step which is
at the RSL_REL_REQ.
Change-Id: I8cb57a9fef606f459542708206f5ea4de1def7a1
This allows each ConnHandler to issue telnet commands to the VTY
As a side-effect, it puts some more stress on the VTY interface,
as each [parallel] DchanHdlr now has its own telnet connection.
Change-Id: Ibd726af53219d829286da80b44ea4d9fb2ffdf3d
A problem with the parameter ordering inside the mgcp-client
(osmo-mgw) prevented TTCN3 from accepting the SDP data that
was generated by the IUT. The problem is now fixed and the
hack can be removed.
- remove hack
Change-Id: Ic37f78c2676e7c98144f10e9f3b55bc9651a4f7c
Related: OS#2818
Pau Espin
Harald Welte
Philipp Maier
Max
Daniel Willmann