The tests so far only tested SGsAP alone, which doesn't get us very
far. Let's add interfacing with the S1, too.
Change-Id: Id54071b901db720a0f88b91cdc5a8e09bea0fb58
The TTCN3 tests MSC_Tests.TC_bssap_lu_sgsap_lu_and_mt_call and
MSC_Tests.TC_sgsap_lu_and_mt_call initate an MT-CSFB call for testing
purposes, but they also send an SGsAP-MO-CSFB-INDICATION to make the MS
come back to LTE. This is wrong. SGsAP-MO-CSFB-INDICATION just informs
the VLR that the UE has initiated a MO CSFB call on the LTE side. On MT
CSFB calls this message should not appear. Lets remove it.
Related: SYS#4624
Change-Id: I2e9fda4fe97866c4cbc77224ba1930ca81411fd6
The testcase TC_paging_resp_unsol expects the BSC to close the channel
when an unsolicit paging response is received. This expectation is due
to the fact that osmo-bsc supports multiple MSC, which is not specified
in 3gpp specs. Therefore the BSC needs to know which MSC is in charge.
However, with MT-CSFB calls it is a normal situation that the BSC
receives a paging response on abis without sending a paging first since
the MSC has paged the UE via the SGs interface. In those cases we expect
the BSC to forward the paging response to the first configured MSC.
Related: SYS#4624
Change-Id: I5562cbf61a2aa42e6950860bc0f9c6c20c61a9fe
The SGSN_Tests.ttcn run into bugs when doing the isvalue() check on a const object.
Check explicit for "omit" to skip creation of the vc_RAN object
Change-Id: I639ab6d0586174c0f20b93a53169f0aa254970fa
So far, the RAN_Emulation only supported the CS domain, and not PS. Let's
change that so we can start having IuPS related tests.
Change-Id: I7ba4662e5a7ba31a2582b0c133b3140c8057678f
It originally seemed like a great idea to define a custom record
which aggregates the decoded BSSGP, LLC, L3 and/or SNDCP and passes
it to the individual ConnHdlr. However, particularly with testcase
interoperability for IuPS in mind, this seems bogus. Also, we
never really took advantage of this.
Let's now decode as far as we can decode any PDU, and then send the
decoded version of that PDU via the ports between the BSSGP_Emulation
and the ConnHdlr component.
Change-Id: I8c1082880902dd9a04935945f0293895f4d0c53a
This allows us to encode/decode 3GPP S1AP messages, as used on the S1
interface control plane between eNodeB and MME.
Change-Id: Ie019bef1f3ef9cc5f6c94a64c7f352c510fb5633
Sometimes it's useful to test with a non-installed locally-compiled
version of Eclipse TITAN. This adds an example on how to do that.
Change-Id: I6a8c26becff868a3d2fcd3a01e2c03adfc748e0a
Since osmo-bsc commit "neighbor config: allow re-using ARFCN+BSIC pairs"
(I29bca59ab232eddc74e0d4698efb9c9992443983), osmo-bsc considers only those
cells as neighbors that are explicitly listed, or all local cells if none are
listed. This lead to breaking TC_ho_int, because the osmo-bsc.cfg has only one
remote-cell neighbor for bts 0, and hence a handover to local cell bts 1 is now
regarded as invalid.
The remote-cell neighbor is needed for inter-BSC handover tests; also consider
that the TC_ho_neighbor_config_* tests each place individual neighbor
configuration by live VTY interaction.
Hence make all of these tests more robust: remove the neighbor config from the
osmo-bsc.cfg file, and instead include VTY interaction for each test case that
sets the particularly needed neighbor configuration at runtime.
An analogous osmo-bsc.cfg change in docker-playground is in change
If44dd6b578cdc55076c8180707d1c2d69fe5f2a8.
(It is not actually harmful to leave the neighbor config in osmo-bsc.cfg, but
remove that since it is also not needed anymore.)
Change-Id: If44dd6b578cdc55076c8180707d1c2d69fe5f2a8
Add tests to play through various neighbor configurations.
Tests will pass as soon as osmo-bsc I29bca59ab232eddc74e0d4698efb9c9992443983
is merged.
Add RSL2 to allow triggering handover to BTS 2.
Adjust osmo-bsc.cfg to match the new tests. Also applied in docker-playground
I1c57a04747f5ec004ccf4657954dcb0b003c24fc.
- Actually enable handover.
- Add bts 3
Depends: osmo-bsc I8623ab581639e9f8af6a9ff1eca990518d1b1211 ('no neighbors')
Related: OS#4056
Change-Id: Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
Since [1] we additionally filter Access Bursts by the link quality
(defined by C/I) in L1SAP, and since [2] we do provide the actual
C/I values for osmo-bts-trx, as was received from the transceiver.
[1] https://gerrit.osmocom.org/r/I893ec9c6c2ebad71ea68b2dc5f9f5094dfc43b78
[2] https://gerrit.osmocom.org/r/I8d86dec7ebc039cbfd038c4342ff328b11281865
The default minimum C/I for Access Bursts in OsmoBTS is 50 cB,
while the TTCN-3 test cases configure fake_trx.py to send 0 cB,
so all Access Bursts are getting dropped, as expected.
Let's use 60 cB (or 6 dB) by default. This change makes Access
Bursts pass again, and thus fixes some broken test cases.
Change-Id: Ic345f7995c2553e346590cd851f8857d26e7beb2
Fix the broken pipe race condition caused by closing the RAN connection
too early. Properly wait for clear command and send clear complete.
TC_lu_imsi_auth_tmsi_check_imei_{nack,err} do not pass anymore, because
OsmoMSC is sending the LU reject twice. Patch [1] fixes it.
[1] I127b27937613ea0ff29d67991c0414fca6d441d9 (osmo-msc)
Fixes: 1d118ff753 ("msc: add check IMEI tests")
Change-Id: I836f76242463789c4c003feec757714827f2a31b
Fix MSC test TC_lu_by_imei, which uses tr_ML3_MT_MM_ID_Req with the
default "?" (AnyElement) parameter. It was failing with the following
runtime error:
Dynamic test case error: Performing a valueof or send operation on a non-specific template of enumerated type @L3_Templates.CmIdentityType.
Fixes: 3289845913 ("L3_Templates: add enum CmIdentityType")
Related: https://www.eclipse.org/forums/index.php/t/1099816/
Change-Id: Ie7fbe52ac3c0c8f233680dcc311febec77d2ed0b
The idea of this test case is to verify that the link quality
measurements, in particular C/I (Carrier-to-Interference ratio),
are delivered to the PCU (as a part of PCUIF_DATA.ind).
The C/I ratio needs to be calculated by the transceiver from the
training sequence of each burst, where we can compare the "ideal"
training sequence with the actual training sequence and then
express that in cB (centiBels).
This test case can only be executed with fake_trx.py and trxcon,
because this pair allows us to simulate C/I values. Also, the
new TRXD header format needs to be supported (see OS#4006).
Change-Id: I67d89b2f0e13a7a6f74f001b19d37add77ec06f5
Depends: (OsmocomBB) I7080effbbc1022d1884c6d6f0cb580eba8e514ff
Related: OS#1855
Extend BSC_ConnHdlr with new check IMEI related parameters. Add tests
for check IMEI and check IMEI early for multiple auth variations, as
well as variants where the HLR would respond with NOK or ERR.
Note that we can safely set "check-imei-rqd 0" in f_init(), because the
latest OsmoMSC version already suppors this VTY command.
Two tests do not always pass, sometimes the RAN connection breaks
before the test finishes (TC_lu_imsi_auth_tmsi_check_imei_err and
TC_lu_imsi_auth_tmsi_check_imei_nack). I have added them as expected
errors in the expected-results.xml.
Related: OS#2542
Change-Id: Ic34bb8dc8547cafb5a53df03884554dd4f72956d
Make sure that the RR is released only after the MSC has sent the Clear Command:
- first expect a Clear Request from osmo-bsc and return a Clear Command,
- only then accept RR release messages.
See 3GPP TS 48.008 3.1.5.3.3 "Abnormal Conditions": "The terrestrial resource
in the old BSS shall remain assigned until a CLEAR COMMAND message is received
from the MSC"
osmo-bsc already complies, the test should continue to pass.
Change-Id: Iba05336d3c4af8a1c57cdc828dae464eae3510b9
This test case reproduces a real-world PCO capture including a broken
PAP AuthenticationReq. It triggers some weird behavior in OsmoGGSN
1.3.0 where it would send duplicate IPCP repsonses and no PAP response.
Change-Id: Ie89d984ed9e26fbbb2e4914bdb8623446d462a4c
Related: OS#3914
BSC waits to receive a ClearCommand in response to its ClearRequest
before it starts tearing down the MGCP conn on the MSC-side of the MGW
endpoint.
As a result, expected DLCX was not being sent which made test fail.
However, currently test still fails because current osmo-bsc master
sends a repeated ClearRequest message in this scenario.
Related: OS#4078
Change-Id: Ic398896147a0b6b04ffeae56a23d25783b2b17fe
Fix ttcn3-mgw-latest by not running "conn-timeout 0" during f_init_vty
at the start of every test case. The latest osmo-mgw release does not
have that command yet.
Change-Id: I8bbf15baa45679d5812a5a9184520ef9b9e73bba
* MGCP-over-IPA handling in MSC_ConnectionHandler means we need to use
the new MGCP_CLIENT_MULTI port since we'll be managing MGCP messages
from 2 different UDP connections, and we need to be able to route
answers correctly. As a result, parameter multi_conn_mode is enabled for
SCCPlite and all code adapted to use that port in that type of scenario.
* iDuring calls when on SCCPlite, send a full (all-required-params-in)
CRCX through the MGCP-over-IPA connection towards the BSC in order to
emulate the MSC, and expect the correct answer back. This way we test
BSC funcionality to forward MGCP messages coming from MSC works as
expected.
Related: OS#2536
Depends: osmo-bsc.git I38ad8fa645c08900e0e1f1b4b96136bc6d96b3ab
Change-Id: I31fed700772dd0b063f913b1e1639fd428c46e7d
* Some scenarios like MGW BSC-attached in SCCPlite require handling of
2 MGCP-over-UDP sockets in MGCP Emulation: 1 for regular
libosmomgcp-client from osmo-bsc and another one from the forward socket
from osmo-bsc (of MGCP-over-IPA messages communicated with MSC).
* Old port is kept for backward compatibility with other tests and
enabled by default. It's also interesting to keep it because it makes
tests without special needs (2 sockets) to use the old port/API which
produces simpler code to read and mantain.
* Users of the new port have to enable multi_conn_mode parameter and
expect to interact with port MGCP_CLIENT_MULTI instead of MGCP_CLIENT,
which will offer messages containing information about the UDP
connection being used by that message.
Change-Id: Ic0ba8c5cde068c07671512a83095d83e28b86746
Move logic handling CRCX and MDCX to function, so they can be reused for
other ports in forthcoming commits.
Change-Id: I07344657c5d1465a8e0c278adb76150ca7f449ba
Harald Welte
Philipp Maier
Alexander Couzens
Oliver Smith
Eric Wild
Pau Espin