New TC_assignment_osmux_bts is added which tests Osmux used only
BTS<->BSC.
Existing TC_assignment_osmux is renamed to TC_assignment_osmux_cn,
and a new TC_assignment_osmux is added which tests using Osmux on both
sides (towards BTS and CN).
Related: SYS#5987
Change-Id: I6e82eb9d995de988b812001e1c4cf6923509de66
According to 3GPP TS 44.018, section 9.1.15, the RR Handover Command
message may optionally contain the Cipher Mode Setting IE (10.5.2.9).
Section 9.1.15.10 states that this IE may be omitted in case of the
intra-RAT GERAN-to-GERAN handover, however in case of the inter-RAT
handover (e.g. EUTRAN-to-GERAN), this IE *shall* always be included.
In f_ho_into_this_bsc(), check presence and correctness of the Cipher
Mode Setting IE. Add TC_srvcc_eutran_to_geran_a5_3, which is similar
to TC_srvcc_eutran_to_geran, but enables ciphering on the target channel.
This patch makes all SRVCC relates test cases fail, until [1] is merged.
Change-Id: Ic3dfc4e31a7ed078cdfdaced9986ee9551c5aa7c
Related: [1] osmo-bsc.git I1d270e82d0a9b12897fc94dae4e8999aa132a22f
Related: SYS#5838
Verify that A5/1 is preferred over A5/2. Add encr_exp_enc_alg to
MSC_ConnectionHandler:TestHdlrEncrParams, so the expected encryption
algorithm can be different from what the MSC tells the BSC about the
capabilities of MS.
Related: OS#4975
Change-Id: I688d056bcfe73f7846f908a28f4621f944cf2178
Allow only A5/4, but omit the Kc128 IE from MSC's msg. Expect Cipher
Mode Reject.
Related: SYS#5324
Change-Id: I7734a4a59797a9b21523c33f48815a8094f4e6ec
reasons:
* TC_assignment_fr_a5_4() runs an unusual sequence of messages: it first
fully assigns an lchan, and after that sends a Cipher Mode Command.
Usually, the ciphering happens as part of attaching (Compl L3).
The new test TC_assignment_fr_a5_not_sup() does the ciphering in the
usual sequence, and properly expects a Cipher Mode Reject.
* TC_assignment_fr_a5_4 means to ask for an *unsupported* encryption
algo. Since we are going to introduce A5/4 support shortly, we'll need
to free up this name, for a successful A5/4 encryption test.
New test TC_assignment_fr_a5_not_sup() asks for A5/5 encryption, which
is not supported.
Related: SYS#5324
Change-Id: I83eca18d1b3d8d58177aa3750935ec5a3a985ca4
The aim of this test case is to verify DLCI / RSL Link ID conversion
for MO/MT L3 messages on SAPI0/SAPI3. In particular, the test suite
verifies the following scenarios:
- RSL -> BSSAP:
- 16 MO messages on FACCH/F with SAPI0,
- 16 MO messages on SACCH/F with SAPI3;
- BSSAP -> RSL:
- 16 MT messages on FACCH/F with SAPI0,
- 16 MT messages on SACCH/F with SAPI3.
Change-Id: Ica69ae95b47a67ba99ba9cc36629b6bd210d11e4
Related: OS#3716
Otherwise most tests in bsc-latest fail because in latest release BSC
never sends that IE.
Related: OS#4244
Change-Id: I725836784a7900d2ea51eae188c2c279e8639dbf
Test verifies once osmux is enabled in osmo-bsc, BSSMAP RESET (ACK)
contains Osmux Support IE and that it correctly handles BSSMAP ASsign
Req with Osmux CID.
Related: OS#2551
Depends: osmo-bsc 6de754cdde5319af3059d8fc6abf85037ec7eacc
Depends: titan.ProtocolModules.BSSMAP Iaf1e137269c0da20b2c96fd104b57edf336693af
Change-Id: If69c716dc06d61d810c32d1720a237c7535baca8
The S15-S0 related testscases are missing from the expected-results.xml
file. Lets add them.
Change-Id: I28a853ec25feb723b2d333061e1ae4d2e0b34d86
Related: SYS#4470
When a channel is assigned via the assignment request throught the A
interface, the MSC may offer either FR, HR or both. When FR and HR are
permitted, a preference is set on one of the two.
At the moment we do not check how the bsc is reacting to those
preferences and its also not checked how the behavior is when the
preferred rate is not available because all lchan of that type are
already in use. Lets add a set of tests to verify this.
Change-Id: I109d986dd7ece1a56422a669ca64353ed46f7ed6
Depends: osmo-bsc I397e68e26d6a1727890353fa34f4897b54795866
Related: OS#3503
The idea of this test case is to verify channel deactivation
procedure due to no response to Immediate Assignment.
Change-Id: I00b0838c9f919303aef72280248b0d1317f42b3b
Related: OS#3709
With this test we want to verify that channels are released if BSC fails
to complete an L3 request, for instance because no pending Paging
CMD is found for a received Paging Response.
Related: OS#3680
Change-Id: Iabe8a51aa13d2fcfec4500cf7aab47d60cc138ce
Add f_gen_handover_req() like f_gen_ass_req(), to match AoIP or SCCPlite
requirements.
For incoming HO, MSC_ConnHdlr needs to know the SCCP addresses to expect the
incoming SCCP Connection from MSC to BSC. Add 'handover' section to
TestHdlrParams, and pass in the addresses from test_CT via that.
In osmo-bsc.cfg, add a remote neighbor config, so that the VTY command
'handover any to arfcn 123 bsic any' can trigger an outgoing inter-BSC HO.
Add various BSSMAP handover templates to BSSMAP_Templates.ttcn.
Add RR Ho Command template to L3_Templates.ttcn.
Move ts_BSSAP_Conn_Req() from msc/BSC_ConnectionHandler.ttcn to
library/BSSMAP_Emulation.ttcn, so we can also model an SCCP Connection Request
in BSC_Tests.ttcn (this time from MSC to BSC).
Add the two new tests to bsc/expected-results.xml.
Related: OS#2283
Change-Id: Id22852d4be7f127d827e7a8beeec55db27c07f03
since the local MGW may not support transcoding, osmo-bsc should
avoid to LCLS call legs that use different codec/rate. This test
attemts to set up a call with different codec rate and checks if
those legs do not get LCLSed
Change-Id: I91b132306e530ad9ca03fb4a34012381be6b0b52
Depends: osmo-bsc I157549129a40c64364dc126f67195759e5f1d60f
Related: OS#1602
At the moment LCLS is only tested using GSM-FR. There are not LCLS
tests that test with GSM-HR yet. Lets make GSM-HR available and see
what happens when we run BSC_Tests_LCLS.TC_lcls_gcr_bway_connect
on HR instead of FR.
- set channelType depending on g_pars.ass_codec_list.codecElements[0]
- add testcase TC_lcls_gcr_bway_connect_hr
Related OS#1602
Change-Id: I2421519a642bdb7453ae4a9058e177845690a489
Two paging tests were failing in Jenkins due to a configuration problem.
This has now been fixed so we can expect these two tests to pass:
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_lai
Related: g#9361
Related: docker-playground 4147adabb9917fd852cc49c93603f379ec810c6b
Change-Id: I1a3dc5fb13385549bb9ec523271a5da5dc6aaa8c
'make clean' as generated by ttcn3_makefilegen removes all *.log files, which
of course cleans out expected-results.log, which should not happen. Since this
is a junit XML file, rename the suffix to .xml.
Change-Id: Ic334f6b758eef865e3a497aa430691a3ae696d25
Harald Welte
Pau Espin
Neels Hofmeyr
Vadim Yanitskiy
Oliver Smith
Neels Hofmeyr
Philipp Maier