osmo-bsc does not use an rtp-base for years, ever since we're using an MGW.
Related: Id14fa3066ca5d472a817593074a6222f159168a8
Change-Id: Ia4866fc603877b2ab8ce16683e9f6145764117c7
In f_probe_for_handover disable the RSL emulation before the vty handover
command. Otherwise, osmo-bsc may be too fast to issue the handoverCommand, so
that RSLem still handles it and says: "RSL for unknown Dchan".
(f_probe_for_handover() receives the handoverCommand directly, just to detect
whether a handover would be initiated, and then quickly aborts the handover
procedure.)
Related: OS#4264
Change-Id: I7f73ef8cbdf46e31a46c9e1b7ad0fa2bd41c0a12
RLCMAC blocks have a lot of fields and we will potentially require lots
of different templates, as well as functions to handle related structs.
Change-Id: I9c6597178168aa3848b21930f33be698dd2ce545
All the records related to Mobile Identity IE (see 3GPP TS 24.008,
section 10.5.1.4) are defined in [1], so there is no real need to
dumplicate them. Moreover, most of the related templates in
library/L3_Templates.ttcn are based on these records.
[1] titan.ProtocolModules.MobileL3_v13.4.0/src/MobileL3_CommonIE_Types.ttcn
Change-Id: I27c2743c59db770d6f7e9447dc8c1f539b228ced
Some stuff was wrong and some was missing after new features being
implemented in tests over time.
Change-Id: I7a279592a68ffc76408a8e728e76151534265cc0
Otherwise most tests in bsc-latest fail because in latest release BSC
never sends that IE.
Related: OS#4244
Change-Id: I725836784a7900d2ea51eae188c2c279e8639dbf
It will allow changing ms max power in osmo-bsc.cfg as well as TTCN3
expactancies in BSC_Tests.cfg easily in docker-playground.git without
needing to recompile or change code in TTCN3.
Change-Id: Ib00c96902377582bc32778c5b947a6b4274041aa
The BSC must not only pass the ETWS Primary Notification from CBSP
down every dedicated channel, but it must also send it via an
Osmocom-specific RSL message to enable the BTS to brodcast it via
the PCH (P1 Rest Octets) and pass it to the PCU for PACCH.
Change-Id: Ia418095844aaa418a4e2ff6fd75d8a4b3c8bb9c0
Related: #4046
When the BSC receives an ETWS PN via CBSP, it must send it through all
established dedicated channels of the matching BTSs.
Related: OS#4046
Change-Id: Ib057bd251604e9bae968e71de245b3bbf737a356
In this testsuite, we simulate BTS and CBC by attaching to RSL and CBSP
protocol interfaces of the BSC. We then issue a variety of CBSP
commands to the BSC and check for corresponding action on both the BTS-
facing RSL as well as responses on the CBSP side.
Change-Id: Ia6ffac181f50586d06d2f29bca1c57285179e861
Change the unit_id value, that is supposed to be unknown at BTS, from
0/0/0 to 99/0/0 to make TC_oml_unknown_unit_id pass again. The test was
failing, because a new bts that matches 0/0/0 was added to osmo-bsc.cfg
in [1], [2] and [3].
[1] Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
[2] I1c57a04747f5ec004ccf4657954dcb0b003c24fc (docker-playground)
[3] I00547dccf8908d46df4730cb513fe577956d7683 (docker-playground)
Related: OS#4156
Change-Id: I585ff825c7b6bca17e5c6fb6d670a649965a1653
Fix failing TC_ctrl test for ttcn3-bsc-test and -latest.
Depends: I00547dccf8908d46df4730cb513fe577956d7683 (docker-playground)
Related: OS#4156
Change-Id: Ie2c664ba0f845da644e20e2c919c12d8fc2af6ba
The testcase TC_paging_resp_unsol expects the BSC to close the channel
when an unsolicit paging response is received. This expectation is due
to the fact that osmo-bsc supports multiple MSC, which is not specified
in 3gpp specs. Therefore the BSC needs to know which MSC is in charge.
However, with MT-CSFB calls it is a normal situation that the BSC
receives a paging response on abis without sending a paging first since
the MSC has paged the UE via the SGs interface. In those cases we expect
the BSC to forward the paging response to the first configured MSC.
Related: SYS#4624
Change-Id: I5562cbf61a2aa42e6950860bc0f9c6c20c61a9fe
Since osmo-bsc commit "neighbor config: allow re-using ARFCN+BSIC pairs"
(I29bca59ab232eddc74e0d4698efb9c9992443983), osmo-bsc considers only those
cells as neighbors that are explicitly listed, or all local cells if none are
listed. This lead to breaking TC_ho_int, because the osmo-bsc.cfg has only one
remote-cell neighbor for bts 0, and hence a handover to local cell bts 1 is now
regarded as invalid.
The remote-cell neighbor is needed for inter-BSC handover tests; also consider
that the TC_ho_neighbor_config_* tests each place individual neighbor
configuration by live VTY interaction.
Hence make all of these tests more robust: remove the neighbor config from the
osmo-bsc.cfg file, and instead include VTY interaction for each test case that
sets the particularly needed neighbor configuration at runtime.
An analogous osmo-bsc.cfg change in docker-playground is in change
If44dd6b578cdc55076c8180707d1c2d69fe5f2a8.
(It is not actually harmful to leave the neighbor config in osmo-bsc.cfg, but
remove that since it is also not needed anymore.)
Change-Id: If44dd6b578cdc55076c8180707d1c2d69fe5f2a8
Add tests to play through various neighbor configurations.
Tests will pass as soon as osmo-bsc I29bca59ab232eddc74e0d4698efb9c9992443983
is merged.
Add RSL2 to allow triggering handover to BTS 2.
Adjust osmo-bsc.cfg to match the new tests. Also applied in docker-playground
I1c57a04747f5ec004ccf4657954dcb0b003c24fc.
- Actually enable handover.
- Add bts 3
Depends: osmo-bsc I8623ab581639e9f8af6a9ff1eca990518d1b1211 ('no neighbors')
Related: OS#4056
Change-Id: Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
Make sure that the RR is released only after the MSC has sent the Clear Command:
- first expect a Clear Request from osmo-bsc and return a Clear Command,
- only then accept RR release messages.
See 3GPP TS 48.008 3.1.5.3.3 "Abnormal Conditions": "The terrestrial resource
in the old BSS shall remain assigned until a CLEAR COMMAND message is received
from the MSC"
osmo-bsc already complies, the test should continue to pass.
Change-Id: Iba05336d3c4af8a1c57cdc828dae464eae3510b9
BSC waits to receive a ClearCommand in response to its ClearRequest
before it starts tearing down the MGCP conn on the MSC-side of the MGW
endpoint.
As a result, expected DLCX was not being sent which made test fail.
However, currently test still fails because current osmo-bsc master
sends a repeated ClearRequest message in this scenario.
Related: OS#4078
Change-Id: Ic398896147a0b6b04ffeae56a23d25783b2b17fe
* MGCP-over-IPA handling in MSC_ConnectionHandler means we need to use
the new MGCP_CLIENT_MULTI port since we'll be managing MGCP messages
from 2 different UDP connections, and we need to be able to route
answers correctly. As a result, parameter multi_conn_mode is enabled for
SCCPlite and all code adapted to use that port in that type of scenario.
* iDuring calls when on SCCPlite, send a full (all-required-params-in)
CRCX through the MGCP-over-IPA connection towards the BSC in order to
emulate the MSC, and expect the correct answer back. This way we test
BSC funcionality to forward MGCP messages coming from MSC works as
expected.
Related: OS#2536
Depends: osmo-bsc.git I38ad8fa645c08900e0e1f1b4b96136bc6d96b3ab
Change-Id: I31fed700772dd0b063f913b1e1639fd428c46e7d
* Some scenarios like MGW BSC-attached in SCCPlite require handling of
2 MGCP-over-UDP sockets in MGCP Emulation: 1 for regular
libosmomgcp-client from osmo-bsc and another one from the forward socket
from osmo-bsc (of MGCP-over-IPA messages communicated with MSC).
* Old port is kept for backward compatibility with other tests and
enabled by default. It's also interesting to keep it because it makes
tests without special needs (2 sockets) to use the old port/API which
produces simpler code to read and mantain.
* Users of the new port have to enable multi_conn_mode parameter and
expect to interact with port MGCP_CLIENT_MULTI instead of MGCP_CLIENT,
which will offer messages containing information about the UDP
connection being used by that message.
Change-Id: Ic0ba8c5cde068c07671512a83095d83e28b86746
Move logic handling CRCX and MDCX to function, so they can be reused for
other ports in forthcoming commits.
Change-Id: I07344657c5d1465a8e0c278adb76150ca7f449ba
* TTCN3 code was not ACKing the DLCXs, and as a result retransmitted
DLCX BSC->MGW were being counted as 2nd DLCX.
* In SCCPLite, only 1 DLCX is expected BSC->MGW, because the BSC only
takes care of the BTS-side conn in the endpoint, while MSC takes care of
the MSC-side conn (which is not sent in this case because doesn't really
involved the BSC other than forwarding the message, which will already
be tested in other places in forthcoming commits).
* Getting rid of retransmissions by ACKing the DLCX, it unconvers a bug
in TC_ho_out_fail_no_ho_detect when on AoIP, where BSC only deletes one
of the 2 previously created connections.
* Code is refactored into the function because its logic is made more
complex, and may be even more complex in forthcoming commits when we add
MGCP-over-IPA forwarding verification support.
Change-Id: Ia1d0db9af073760105cc8509e228e317dbea2268
Previous to this commit, BSSAP Reset (Ack) messages contained Osmux
Support IE even if transport was SCCPLite, where those IEs are actually
meaningless.
Change-Id: If6cc0f65a0f273297a4523e5d6a7564d966f0aa6
This will allow RAN_Emulation to have better knowledge on the protocol
stack in use, and behave differently based on that information.
For intance, forthcoming commit will append OsmuxSupport IE only if
transport is BSSAP AoIP.
Change-Id: Ife62e328af2d3f2475ff93249f2138820c7ddabb
ttcn3-bsc-test-latest currently fails on most tests because it tries to
use "osmux off" VTY param and only current osmo-bsc master supports it.
Change-Id: I61e4c59b2926f3f70cb6d0190a8683861e54179a
Some of our files didn't have a copyright notice at all, let's add
it. Also, update the notices in other files and ensure a SPDX
identifier is present in all but the most trivial files.
Change-Id: If7fa19ce484b415bc645e39b3d0d666b44b5f0fd
Test verifies once osmux is enabled in osmo-bsc, BSSMAP RESET (ACK)
contains Osmux Support IE and that it correctly handles BSSMAP ASsign
Req with Osmux CID.
Related: OS#2551
Depends: osmo-bsc 6de754cdde5319af3059d8fc6abf85037ec7eacc
Depends: titan.ProtocolModules.BSSMAP Iaf1e137269c0da20b2c96fd104b57edf336693af
Change-Id: If69c716dc06d61d810c32d1720a237c7535baca8
Since we use some BSSMAP extensions to signal Osmux, we need to maintain
our own fork of BSSMAP_Types in order to supports those IEs in BSSMAP
RESET and BSSMAP Assin Req/Compl. Hence, switch all build componenets to
fetch and use our fork.
Depends: titan.ProtocolModules.BSSMAP Iaf1e137269c0da20b2c96fd104b57edf336693af
Change-Id: Ic8debe5f3ffe8e1d4258fa6b4632a3871b99af40
Randomly, this test issues the Clear Command so fast that the MGW has not yet
been set up, and hence the test cannot possibly see DLCX for endpoint conns
that haven't been set up at all. So, simply wait a bit before clearing.
Change-Id: Idd0b3810916efd02a499e0ac060a6a275265b8c3
The RAN_Emulation currently unconditionally provides BSSAP and MGCP support.
Let's re-structure the code so that support for those protocols is now
possible to enable/disable at compile time.
This patch is in preparation of introducing RANAP support in RAN_Emulation.
Change-Id: Id53ba3ff05f9946230e0e4a759245de14a0f9fbd
Related: OS#2856
So far, BSSMAP_Emulation supported only a transport over BSSMAP.
However, we soon intend to merge support for RANAP in order to
simulate RANAP/Iu connections as well as BSSMAP. Let's start
by renaming some of the existing types/functions/ports/modules
without introducing any functional changes just yet.
Related: OS#2857, OS#2856
Change-Id: Iecbcb0c6c136baad9460eca40606bb4010d8882d
Make sure that the S15-S0 related testcases are only executed when AoIP
is used as transport.
Change-Id: I62d51bbe4b1f089ded6c271b68414a4a37d509d8
Related: OS#3864
Vadim Yanitskiy
Neels Hofmeyr
Pau Espin
Harald Welte
Oliver Smith
Philipp Maier