Before the raw/file split we used to allow filenames with colons for host
device only. While this was more by accident than by design people rely
on it, so we need to bring it back.
So move the host device probing to be before the protocol detection
again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
People were wondering why qemu-img check failed after they tried to preallocate
a large qcow2 file and ran out of disk space.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
i386 cpuid.c currently claims XSAVE is supported in the CPUID filter,
but that's not true: Only FXSAVE is supported. Remove that bit
from the filter.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ssse3 uses tables with only two entries per op, but it is indexed
with b1 which can contain variables upto 3. This happens when ssse3
or sse4 are used with REP* prefixes.
Add boundary checking for this case.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We were ignoring REX_B while special-casing NOP, i.e. xchg eax,eax.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
scanf calls must not use PRI constants, they have probably the wrong size and
corrupt memory. We could replace them by SCN ones, but strtol is simpler than
scanf here anyway. While at it, also fix the parsers to reject garbage after
the number ("4096xyz" was accepted before).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Richard Henderson <rth@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 50e32ea8f3 changed the behaviour
for the return type of net_client_init() when a nic type with no init
method was specified. 'none' is one such nic type. Instead of returning
0, which gets interpreted as an index into the nd_table[] array, we
switched to returning -1, which signifies an error as well.
That broke VM start with '-net none'. Testing was only done with the
monitor command 'pci_add', which doesn't fail.
The correct fix would still be to return 0+ values from
net_client_init() only when the return value can be used as an index to
refer to an entry in nd_table[]. With the current code, callers can
erroneously poke into nd_table[0] when -net nic is used, which can lead
to badness.
However, this commit just returns to the previous behaviour before the
offending commit.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We currently only clear SVM_EVTINJ_VALID after successful interrupt
delivery. This apparently does not match real hardware which clears the
whole event_inj field on every vmexit, including unsuccessful interrupt
delivery.
Reported-by: Erik van der Kouwe <vdkouwe@cs.vu.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The commit 8e65b7c049 introduced
expire_time of UHCIState. But expire_time is not in vmstate, the
second uhci_frame_timer will not be fired immediately after loadvm.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For all i, ports_map[i] is used in and only in the i-th iteration.
Replace the dynamic array by a scalar variable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch avoids handling write watchpoints on read-only memory access.
It also breaks the searching loop for watchpoint once the setup for
handling watchpoint later is done.
Signed-off-by: Jun Koi <junkoi2004@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
lsi_bad_phase has a bug in the choice of pmjad1/pmjad2. This does
not matter with Linux guests because it uses just one routine for
both, but it breaks Windows 64-bit guests. This is the text
from the spec:
"[The PMJCTL] bit controls which decision mechanism is used
when jumping on phase mismatch. When this bit is cleared the
LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when
the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2)
when the WSR bit is set. When this bit is set the LSI53C895A will
use jump address one (PMJAD1) on data out (data out, command,
message out) transfers and jump address two (PMJAD2) on data in
(data in, status, message in) transfers."
Which means:
CCNTL0.PMJCTL
0 SCNTL2.WSR = 0 PMJAD1
0 SCNTL2.WSR = 1 PMJAD2
1 out PMJAD1
1 in PMJAD2
In qemu, what you get instead is:
CCNTL0.PMJCTL
0 out PMJAD1
0 in PMJAD2 <<<<<
1 out PMJAD1
1 in PMJAD1 <<<<<
Considering that qemu always has SCNTL2.WSR cleared, the two marked cases
(corresponding to phase mismatch on input) are always jumping to the
wrong PMJAD register. The patch implements the correct semantics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Original patch from Ulrich Hecht, further work from Alexander Graf
and Richard Henderson.
Cc: Ulrich Hecht <uli@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We need not reserve the register unless we're going to use it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: malc <av1474@comtv.ru>
Christoph Hellwig