Harald Welte
eb1b8432a2
e1_xcvr: Give signals proper names
...
Change-Id: I04107430cab02e493bbabef60b1cc19b535caad6
2020-11-04 15:53:38 +01:00
Sylvain Munaut
25e57302bf
hardware/icE1usb: Update ECN with rev 1.0 production
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Change-Id: I9996a076d2eef341211ba401ec0421bf9b11a78a
2020-10-28 00:42:31 +01:00
Sylvain Munaut
20d9c49b95
hardware/icE1usb: Add GPS protocol specs PDF
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2020-10-09 13:40:38 +02:00
Sylvain Munaut
1599a58344
hardware/icE1usb: Initial import of the production hardware design files
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2020-09-14 10:56:49 +02:00
Sylvain Munaut
744b441909
hardware/icE1usb-proto: Import the early prototype eagle files
...
For archival purposes only, shouldn't really be used to produce anything.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2020-09-14 10:56:49 +02:00
Harald Welte
cf3eec249b
e1-xcvr: Add missing gerber output (was uncommitted in my tree)
2020-09-04 14:54:34 +02:00
Harald Welte
0df93a33fe
big hardware directory re-organization in preparation of ice40 merge
2020-09-04 14:54:34 +02:00
Martin Schramm
55d9d07d27
e1-tracer: repair Excellon drill file (and its desc)
2020-08-30 19:14:59 +02:00
Harald Welte
6d4f68d3d0
export e1-tracer eBOM also as csv
2020-08-30 17:48:10 +02:00
Harald Welte
802f095e47
export e1-tracer gerber files
2020-08-30 17:47:04 +02:00
Harald Welte
1a459b0cbf
e1-tracer: Add PDF renderings of schematics and board
2020-08-30 17:38:48 +02:00
Martin Schramm
471653546e
e1-tracer: denote CC-BY-SA 4.0 in schema (adds to SYS#5052)
2020-08-30 17:12:29 +02:00
Martin Schramm
8858e127a2
e1-tracer: more eBOM atrributes + commit eBOM
2020-08-15 19:04:39 +02:00
Martin Schramm
49188b5867
e1-tracer: collect more BOM atrributes
2020-08-15 18:11:34 +02:00
Harald Welte
fd79cfa8a3
e1-tracer: Add various BOM attributes
2020-08-15 15:19:35 +02:00
Martin Schramm
ea80688044
e1-tracer: further shrink the GND and 3V3 copper inwards left and right
...
... and run a local DRC
2020-08-14 19:10:02 +02:00
Martin Schramm
c56283aeee
e1-tracer: update again from ice40 lib
...
Another pin was found with 'wrong' direction state. Severity of this
is low as is shows only warnings in ERC, removing it anyways during
verification.
2020-08-14 13:38:33 +02:00
Martin Schramm
0e973a2f1e
e1-tracer: update from ICE40 lib after minor Eagle pin dir change
2020-08-14 13:23:53 +02:00
Martin Schramm
c21ca237df
e1-tracer: start a last renumber (after inserting 4x 0R)
2020-08-14 12:41:57 +02:00
Martin Schramm
a0c864cc30
e1-tracer: annotate jumper JP1 signals in silk screen
2020-08-14 12:23:22 +02:00
Martin Schramm
cad013f3c4
e1-tracer: minor silk screen cosmetics
2020-08-14 12:14:47 +02:00
Martin Schramm
c630d167be
e1-tracer: 4x 0R on R and B LED color selection wires
2020-08-14 12:07:08 +02:00
Martin Schramm
51efbb261a
e1-tracer: have more clearance of VBUS trace on PCB edge
2020-08-14 11:09:39 +02:00
Martin Schramm
32a4aa0faf
e1-tracer: add a generic 0603 blue LED type w/ Vf=2.8V
...
designating LTST-C193TBKT-5A for now
2020-08-12 17:25:12 +02:00
Martin Schramm
488520323b
e1-tracer: improve power bypassing on LIU's VDDT and VDDA
...
...by placing 2x 22u per LIU (instead of 68u DNP), shrinking packages
from 1206 to 0805
2020-08-12 17:12:51 +02:00
Martin Schramm
d6c12735b1
e1-tracer: add 2x 33R series resistors in USB wires
...
and
* update improved HC73 package
* move upper third of PCB (LIUs and XOs) left
2020-08-12 16:07:06 +02:00
Martin Schramm
a5fd600135
e1-tracer: reapir missing VDD_3V3 on serial debug out's TVS
2020-08-11 23:36:55 +02:00
Martin Schramm
1460628d81
e1-tracer: 'update' our generic rc lib again to purge '..@1' packages
2020-08-11 22:00:52 +02:00
Martin Schramm
f75f35966a
e1-tracer: finish PCB
2020-08-11 14:35:05 +02:00
Martin Schramm
e4d7fbbe84
e1-tracer: state copyright in sch and brd
2020-08-06 16:24:00 +02:00
Martin Schramm
8c9a55db6e
e1-tracer: PCB almost ready
...
... with some room for improvement: LEDs might go to the right of the
2x RJ45
2020-08-06 16:10:16 +02:00
Martin Schramm
ff394bdbb0
e1-tracer: commit a first schematic
2020-07-27 13:44:20 +02:00
Harald Welte
190cd58ca7
increase clearance of ground planes; pad roundness
2019-12-20 23:55:34 +01:00
Harald Welte
c5a57a2ab5
enlarge board to have proper mounting holes for mechanical mounting
2019-12-20 23:43:50 +01:00
Harald Welte
dfe01d45f4
squash most parts and avoid silk screen overlaps all over the place
2019-12-20 23:35:19 +01:00
Harald Welte
2a8c4c5f33
change font to vector / update to v2
2019-12-20 23:14:49 +01:00
Martin Schramm
15e6f9a81b
e1_xcvr.brd: minor routing improvement on TRING signal
2018-05-29 20:05:48 +02:00
Martin Schramm
00ebf25701
replace old PULSE_T1094NL footprint, repair pin assignment (solves OSM#3269)
2018-05-29 19:52:28 +02:00
Martin Schramm
8ce574846d
laforge.lbr: PULSE_T1094NL: better tPlace and tDocu layer (for OSM#3270)
2018-05-29 19:21:38 +02:00
Martin Schramm
69f96a69ad
connect LIU's pin 44 to GND (solves OSM#3247)
2018-05-29 13:38:51 +02:00
Martin Schramm
ed2b563216
laforge.lbr: repair PULSE_T1094NL footprint and symbol (solves OSM#3270)
...
... and OSM#3271. - The transformer symbol is made of two identical coils
and hence it is not possible to mark the "2:" side (pins 9-11) separately.
But the naming of this coil was changed in a way, that, when invoked, the
"2" of the subpart name "TR1-1:2" shows towards the pins 9-11.
Maybe we should evolve to a device symbol with two coils merged rather than
two identical but separated, then an individual naming could honour the
2:1 side and can not be disturbed by e.g. subsequent mirroring. -
Also repaired the name and value designators' layer association.
2018-05-18 21:26:33 +02:00
Harald Welte
5b15f681e5
add E1 tap hardware design
2012-07-21 20:22:23 +02:00
Harald Welte
ceb6ef1d21
laforge.lbr: fix amphenol sim reader footprint
2012-07-01 11:21:26 +02:00
Harald Welte
b59bfbc3cc
major update of laforge.lbr with lots of new components
2012-07-01 10:45:55 +02:00
Harald Welte
638afbb89b
'new' PCB routing by Christian Vogel
2012-03-06 21:53:51 +01:00
Harald Welte
28460ee9e5
major update of laforge.lbr with lots of new components
2012-02-20 23:42:18 +01:00
Harald Welte
ceb70a8260
give parts names without "$", use 47nH as L1 (1206)
2012-01-14 12:44:58 +01:00
Harald Welte
b8dfc48a37
approve lots of warnings about thinner wires
...
Christan has routed lots of wires thinner than what the network specific
rules state. We approve all of them as we don't care about thinner
wires.
2011-12-26 12:59:33 +01:00
Harald Welte
71ba939922
remove stray GNDIO wire, add junction, approve some warnings
2011-12-26 12:59:02 +01:00
Christian Vogel
5becd7e2fa
re-route complete board, add PWR jumper, LED series resistor
2011-12-26 12:57:31 +01:00