per default enabled providers have been validated in August 2004, other
providers during the year 2004. Also included are cellphone entries
in the country-de.dat for Ghana, Moldova, Kazakhstan, and Syria.
* fixed broken url reference to www.asterisk.org
* added hint that PBX may not like selecting a preferred B channel
* added hint that EAZ mapping may be used for dialin
report footer. `-x' displays only call selected or not deselected by
hour or type of day -- may be useful in conjunction with `-r'.
Activated new configuration file entry `REPOPTIONS' for isdnrep default
options. This options can be disabled by `-c' on the command line.
CONNECT occurs to 0 and not to the time elapsed since SETUP. Now
the value 0 clearly indicates an unanswered call at HANGUP. This
was reported by Rainer Dorsch on the isdn4linux mailinglist in
message <200404181436.48694.rdorsch@web.de> at 2004-04-18.
a maintainer of Debian's isdnutils source package:
- add manpage for isdnbill *)
- fix typo in isdnrate.man
- isdnbill.c: add english help texts
--
*) Renamed the sourcefile isdnrep/isdnbill.man to isdnrep/isdnbill.1.in
because only @MANDATE@ is replaced in %.man files. Other @VARS@ have to
be processed by config.status and therefore noted in configure.in and
configure. The isdnrep manpage was used as template for those entries.
* Removed reference to news group an isdn4linux
* Fixed link to i4lfax project according to link on www.isdn4linux.de
* Add ideas on fax extension to mISDN
* Refer to whitepaper by Germaschewski on isdn4linux (Linux congress 2002)
* Added online links to ct article 3/2004
* More mentioning of www.asterisk.org
* Included some information on new mISDN driver for kernel 2.6.x
(please review especially question config_misdn - I'm not sure whether
my writing is 100% correct)
* Added link to software Asterisk for sending/receiving SMS
* Added link to ISDN Sniffer
* Added link to http://www.staschke.de/linux/anwahl.html (how to
trigger internet dialout by incoming call from mobile phone)
* Added reference to ct 3/2004 (isdn4linux article) and 9/2004
(article on pbx4linux)
* Added Diva 2.02 as supported hardware
* Added hint about PBX4Linux for NTBA mode of hfc hardware
* isdnlog no longer complains about unexpected PBX frames
* Added link on how to configure gentoo:
http://forums.gentoo.org/viewtopic.php?t=29991
* Added link to linecontrol
* More clarification on the ringing mechanism of the ttyI* devices
(for the same MSN, only one device will receive rings)
* File sharing and backdoor activities can be ignored for connection
timeout by using the active-filter option
* fixed outdated hint to de.alt.comm.isdn4linux
* fixed spelling for switzerland
* updated hint on MSNs for switzerland
* fixed broken url to www.wurtel.cistron.nl/i4l-howto-uk.html
- New German ratefile, rate-de.dat version 3.08 from rates4linux,
included rates have been reviewed in January 2004 or later.
- New setting for parameterfile: closefds=yes
See isdnlog(8) or isdnlog/start_prog.c for details.
- Changes checked in earlier but after step to isdnlog-4.67:
- Added Belgian area codes.
- Supported database are shown at isdnlog's startup.
- isdnlog now tries to reconnect to a mysql server if necessary.
- Fixed SIGSEGV in isdnrep with missing zonenames in ratefile.
- New options -c and -i for isdnrate.
- Some small fixes for redirs in ratefiles.
- Disabled unicode for filehandles in Perl scripts.
reconnect if necessary. Previously the database server had to be
reachable at isdnlog startup. Otherwise no database logging took place.
Many thanks to Jochen Erwied for advising this change.
The fd limit is now taken from getrlimit() instead of NR_OPEN.
Close_Fds(first) which tries to close all possible fds is generally
built in but the execution must be requested with "closefds=yes" in
the parameterfile otherwise the isdnlog behaviour remains unchanged.
starting a start script as reaction to a call. The same applies to the
restart of isdnlog using SIGHUP. Till now each restart increases the
number of used fds.
For now the modifications are inactive by default. They can be enabled
by adding the line "DEFS += -DFD_AT_EXEC_MODE=1" to ../Makefile.in.
The next isdnlog (4.68) will have this enabled per default.
The upper limit for fd numbers is taken from NR_OPEN in <linux/limits.h>.
If there is a smarter way to access this limit, please let me know.
Another approach would be to set the close-on-exec flag on each fd
directly after it is opened. This would require more extensive changes.
I'd like to thank Jan Bernhardt for discovering this problem.
and no real zones (Z:).
Check whether the resulting zone from getZone is covered by a redir.
Describe current limitations of redirs in rate-files manpage.
Siegfried Delwiche <siegfried.delwiche@siemens.com>.
Note: Definitions that also occur for the same number in
country-de.dat or cities.dat are ignored in the code file.
be in UTF-8 depending on the locale settings. isdnlog and its tools are
completely unaware of unicode, so the default encoding is set back to
iso-8859-1 (latin1). The backward compatible notation was hinted by
Leopold Toetsch. The changes for perl 5.8.0 are described at
http://www.perldoc.com/perl5.8.0/pod/perldelta.html#PerlIO-is-Now-The-Default
from the current ratefile if the matching zone did not contain a name after the zone
number. This error was introduced with isdnrep-4.65 or rev. 1.96 of isdnrep.c.
Uwe Furchheim discovered the error and provided sufficient details on the mailinglist
rates4linux-users, see http://sourceforge.net/mailarchive/forum.php?forum_id=4262
- Enhancements for isdnrep:
- New option -r for recomputing the connection fees with the rates
from the current (and for a different or the cheapest provider).
- Revised output format of summaries at end of report.
- New format parameters %j, %v, and %V.
- 2 new input formats for -t option.
- Fix for dualmode workaround 0x100 to ensure that incoming calls
will not become outgoing calls if a CALL_PROCEEDING message with
an B channel confirmation is sent by a terminal prior to CONNECT.
- Fixed and enhanced t: Tag handling in pp_rate.
- Fixed typo in interface description of tools/rate.c
- Fixed typo in tools/isdnrate.man, found by Paul Slootman.
- Minor update to sample isdn.conf files:
- Default isdnrep format shows numbers with 16 chars (+ & 15 digits).
- New isdnrep format (-FNIO) without display of transfered bytes.
- EUR as currency in Austria, may clash with outdated rate-at.dat.
The number left of the currency symbol is nowadays insignificant.
- Changes checked in earlier but after step to isdnlog-4.66:
- New option for isdnrate: `-rvNN' requires a vbn starting with NN.
- Do not compute the zone with empty strings (areacodes) as input.
- New ratefile tags r: und t: which need an enhanced pp_rate.
For a tag description see rate-files(5).
- Some new and a few updated international cellphone destinations.
NOTE: If there any questions, problems, or problems regarding isdnlog,
feel free to join the isdn4linux mailinglist, see
https://www.isdn4linux.de/mailman/listinfo/isdn4linux for details,
or send a mail in English or German to <tobiasb@isdn4linux.de>.