Patch adds ability to set start of audio play by double clicking on waveform.
Patch fixes unreported issue with placing waveform at incorrect place when switched relative/absolute time mode (check/uncheck Time of Day).
Change-Id: Ib8ce24aea870e2443e033afbb6d6e9fbcf222431
Reviewed-on: https://code.wireshark.org/review/35621
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When voip_calls_dialog is opened and then closed, mentioned warning is shown
because voip_calls_remove_all_tap_listeners is called twice in two different
methods. Removing of the call from one of method is not possible therefore
I introduced variable which tracks whether voip_calls_remove_all_tap_listeners
was already called or not.
Change-Id: Ic3c206cb7baf6612958d383880af296af019ffd8
Reviewed-on: https://code.wireshark.org/review/35660
Petri-Dish: Jim Young <jim.young.ws@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jim Young <jim.young.ws@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Remove randomly used space inside parentheses to make the coding
style uniform. Add space after if, for and while.
Change-Id: I519f5994b6f73d8a57a5004d51ca460276c618fe
Reviewed-on: https://code.wireshark.org/review/35112
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Speed up the filtering, by only taking rows once
Change-Id: I6123b2974fd58480463e4a0bd02524f6b5c0a353
Reviewed-on: https://code.wireshark.org/review/34879
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Favor asynchronous show() as it does not create new event loop.
Change-Id: I01982806f87705f04138f15ae8eb084f1d4f9b2c
Reviewed-on: https://code.wireshark.org/review/34677
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Using a simple (type *) cast on g_list_next results in a warning
with modern compilers "old-style cast"
Adding a warning for g_list_next and data access to avoid the warning
A good overview why reinterpret_cast has been used can be found here:
https://stackoverflow.com/questions/332030/when-should-static-cast-dynamic-cast-const-cast-and-reinterpret-cast-be-used
It is a 1:1 replacement in this case, but does not use any of the new
cast styles and therefore should be used with caution.
Change-Id: I989f237afc39aaf40133a788b1c0bbd7a51bf974
Reviewed-on: https://code.wireshark.org/review/34284
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Rework the context menu to have same functions behave the same
way and just create the menu while it is needed. Also, add switch
for setting the time of day to the context menu
Change-Id: Id813ff39431f6fad15887856f246d03f209e438d
Reviewed-on: https://code.wireshark.org/review/34165
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
*rtp_stream* -> rtpstream to follow common name
Change-Id: I381bc1cdb8206c5cfe67e94dd7fb1a5cb25f9c16
Reviewed-on: https://code.wireshark.org/review/28394
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_packet renamed to rtpstream_packet_cb to follow *_cb pattern
- variables/types used in iax2_analysis_dialog were created as copy of *rtp* ones, but names were left as *rtp* -> *iax2*
- struct _rtp_stream_info replaced with rtp_stream_info_t
- there was tap-rtp-analysis.h, but no tap-rtp-analysis.c - related content was moved from tap-rtp-common.c
- *rtp_stream* functions renamed to *rtpstream*
- renamed rtp_stream_info_t to rtpstream_info_t to follow *rtpstream* pattern.
- renamed ui/rtp_stream.c rtpstream_draw -> rtpstream_draw_cb
Change-Id: Ib11ff5367cc464ea1b0c73432bc50b0eb9cd203e
Reviewed-on: https://code.wireshark.org/review/28299
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure that the filter for VoIP calls includes RTP streams when calling
Prepare filter.
Bug: 13440
Change-Id: Ia55073151817b88b3fa6a3fd30f98fdf683621a4
Reviewed-on: https://code.wireshark.org/review/27955
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
voip's special tap unregistering should be happening when
WiresharkDialog unregisters its taps.
Change-Id: I8f28b1ed31617b47870cb7a429d43f52fb8c4a86
Reviewed-on: https://code.wireshark.org/review/25294
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The split isn't necessary now that epan no longer uses the capture_file
structure.
Change-Id: Ia232712a2fb5db511865805518e8d03509b2167f
Reviewed-on: https://code.wireshark.org/review/24693
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have cfile-int.h declare the structure, and use it in files that
directly access the structure.
Have cfile.h just incompletely declare the structure and include it
rather than explicitly declaring it in source files or other header
files.
Never directly refer to struct _capture_file except when typedeffing
capture_file.
Add #includes as necessary, now that cfile.h doesn't drag in a ton of
Change-Id: I7931c8039d75ff7c980b0f2a6e221f20e602a556
Reviewed-on: https://code.wireshark.org/review/24686
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Calling QPushButton.setMenu and QMenu.addMenu does not transfer ownership
of the menu. Fix some leaks by letting "receiving" object act parent
for the menu object.
Bug: 14071
Change-Id: Id4edaf895503ef5dd4597eac99c2cdd6ad09b2ff
Reviewed-on: https://code.wireshark.org/review/23600
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Create registration system to allow creation of analysis items
to be localized to the dissector. For now only frame (all) and
TCP are supported.
VOIP functionality will be covered in a separate patch.
Change-Id: I5b05ef6d5afff8d0b162b03a0f451ab810602e81
Reviewed-on: https://code.wireshark.org/review/23571
Reviewed-by: Michael Mann <mmann78@netscape.net>
Following the move for widgets and utils directory, moving models
and delegates to the utils directory. Guidelines for this directory are:
- Implementation of a model
- Implementation of a delegate
- Utility class for data storage used by a model
Note: additionally all includes affected by this move have been changed
to absolute path includes, instead of relative ones.
Change-Id: I3bb868af7d3570437682b722a0cd46c906628570
Reviewed-on: https://code.wireshark.org/review/22790
Reviewed-by: Roland Knall <rknall@gmail.com>
Following the move for widgets directory, moving utils
to the utils directory. Guidelines for this directory are:
- Generic use but not a widget
- Utility functionality used by many classes
Note: additionally all includes affected by this move have been changed
to absolute path includes, instead of relative ones.
Change-Id: I019ae4b6e6f6d06a5745a63ed195edbd36fb936b
Reviewed-on: https://code.wireshark.org/review/22602
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
When a capture file is reloaded, the information stored in
VoipCallsInfoModel is invalidated. Add another cache layer to fix this:
VoipCallsInfoModel wraps around raw data (invalid on close)
CacheProxyModel NEW: use prev. data or cache on close
VoipCallsInfoSortedModel provided sorting, etc.
VoipCallsDialog actual user of model (callTreeView)
This also fixes a UAF after a file was closed, and when a call is
selected (that got worse with the last model/view patch and is "fixed"
in this patch with the caching layer. Note that the Flow sequence and
Play Streams dialog are not that useful when the file is closed).
Change-Id: Ib4daff9dc01a54863fe1d943bdbdb876418924ee
Reviewed-on: https://code.wireshark.org/review/20574
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Functional improvements:
- "Time of day" option is now propagated to the CSV/YAML export.
- The sorting order is preserved in the CSV/YAML export.
Other changes:
- Convert column name identifiers to enum.
- CSV output will now always be quoted (previously numbers like packet
count were not quoted, but since CSV has no numeric type it should
be OK to add quotes). Side-effect of model design decision.
- Instead of clearing the widgets and re-adding all calls, now it will
add new calls to the model. Not tested with a live capture, if the
column data can change, maybe a dataChanged signal is needed.
Due to this patch, it should be easier to add a filter for finding calls
easier (e.g. by From, IP, etc.).
Note: extra QList is used in the model to ensure a O(1) lookup of calls
(rather than O(n) for GQueue).
Change-Id: Ie08462aae038d9c3daf1cc7a152b948724689017
Reviewed-on: https://code.wireshark.org/review/20084
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Remove unnecessary Q_DECLARE_METATYPE macros and replace calls
to QVariant conversions with VariantPointer where necessary
Change-Id: Ia4690590095f930bf94644197de7fa30b00ee7ec
Reviewed-on: https://code.wireshark.org/review/19611
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Move the NULL check before the assignment with the dereference.
Change-Id: Ifcd4fb89c059ad2f4b6606fc1e83dc67a7d7373d
Reviewed-on: https://code.wireshark.org/review/19605
Reviewed-by: Michael Mann <mmann78@netscape.net>
After opening the Call Flows dialog from the Voip Calls dialog, followed
by closing the Voip Calls dialog, the Go To Packet functionality in the
Call Flows dialog is broken. That happens because the signal is not
proxied anymore.
Just remove all these indirections via signals and directly update the
selected packet.
Change-Id: I9c6d519dbe800e4dfdf0407d832f17819b344e46
Reviewed-on: https://code.wireshark.org/review/18933
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
1) Added checkbox to toggle format in start and stop time columns from
relative time to time of day.
2) Added column to show duration of call in between the protocol and
packets column.
Change-Id: I56347fa36885e3a71646e2c9cdde2b8b5fb88846
Reviewed-on: https://code.wireshark.org/review/18383
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add GeometryStateDialog class to handle load and save dialog geometry.
The QDialog class name will be used as window name. For shared
classes the UAT name or the statistics title or abbr will be used.
Change-Id: I5a019598307fb3861518f41e733de834788184d8
Reviewed-on: https://code.wireshark.org/review/14139
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
- Flush any remaining tapped packets before emitting captureFileRetapFinished().
This ensures that all packets have been treated before returning from retapPackets().
- Remove VoIP tap listeners when captureFileRetapFinished() is emitted.
This avoid summing stats each time the RTP player is opened, leading to wrong
information in VoIP calls window
- Change voip_calls_tapinfo_t redraw member from a boolean to bitmap so as to identify
which tap should call the tapinfo->tap_draw() callback. This allows fixing a race condition
where the RTP player can be empty in Qt UI
- Reset some more statistics in voip_calls_reset_all_taps()
Change-Id: Ie7681702c81d338185c1813f2d340a437edf3a04
Reviewed-on: https://code.wireshark.org/review/12474
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Increment the reference counter each time a flow sequence window is opened.
Free seq_analysis_info_t structure once the last flow sequence / VoIP calls / SIP flow window is closed.
Bug: 11712
Change-Id: I20fcb922b0516417d4bd74cdf75475dcb31f8b90
Reviewed-on: https://code.wireshark.org/review/11851
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Qt GUI allows to keep windows open after closing the capture file. Let's not access to freed memory.
Bug: 11573
Change-Id: I9e70d818a4b228af319961ec512b6b9725792477
Reviewed-on: https://code.wireshark.org/review/11270
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- Add free of h245_labels to voip_calls_remove_all_tap_listeners() so that memory is not leaked with Qt GUI
- Call voip_calls_reset_all_taps() from VoipCallsDialog destructor so as to free allocated memory
Change-Id: I46945b5d475d8c1267819021a4ed2782c531a0c6
Reviewed-on: https://code.wireshark.org/review/11268
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Rename the "Play Call" button to "Play Streams". Move the button
creation code to a common routine. Use it to add a "Play Streams" button
to the RTP Stream Analysis, similar to the GTK+ UI.
Don't restrict RTP to IPv[46] as suggested by Michal. I don't have any
RTP-over-Bluetooth captures so I can't test this directly.
Change-Id: I4703cac1d5bf5b3ff0255d36da2c5164feb0547d
Reviewed-on: https://code.wireshark.org/review/10888
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I6298b3de5f0a1cb988014ff16082eaf8c2a3c3c0
Reviewed-on: https://code.wireshark.org/review/10786
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add CaptureFile::delayedRetapPackets, which starts retapping after the
current batch of UI event are processed. Call it in the constructors of
various dialogs so that they are shown before tapping starts.
This *might* fix a crash found when following large streams from the
Conversations dialog.
Change-Id: If1b87491621ab7efcc0519f95891d34dcd9d18c1
Reviewed-on: https://code.wireshark.org/review/9818
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The official C++ way is to leave out the variable name instead. This has the
advantage to be reliable: In one case a variable declared unused was later
used.
Change-Id: I1c96636f7fa7a621d1594d1e9cacaec75c561faa
Reviewed-on: https://code.wireshark.org/review/9532
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
this should make Visual Studio pick up the generated include files
from the build directory instead of the source directory (which may
contain lefovers from an in-tree build)
Change-Id: Ie3de4cdd85a2865e203118a42ab10f443372f03b
Reviewed-on: https://code.wireshark.org/review/9129
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Quit the application when the main window closes. This cleans up any
other top-level windows that might be open.
Don't dereference a NULL pointer when opening the sequence dialog from
the VoIP calls dialog.
Change-Id: I9902d40ead1c5f2e541b6d79f3d957228e4e9687
Reviewed-on: https://code.wireshark.org/review/7107
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add address_to_qstring and address_to_display_qstring, which wrap
address_to_string and address_to_display respectively and return
QStrings. Convert most of the instances in ui/qt to the new routines.
Fix a some memory leaks in the process.
Change-Id: Icda80bbfe0b2df723d54c8da84355255f819af89
Reviewed-on: https://code.wireshark.org/review/6848
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I4f1078b20f41800f72a751612703ad0d4c2ae87b
Reviewed-on: https://code.wireshark.org/review/6323
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Almost all instances require using "manual" memory management, but it gets some ep_ calls out of the GUI.
Change-Id: Ifa7303766b08d09442ccf3d7063cbe061578ecd9
Reviewed-on: https://code.wireshark.org/review/6318
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make the Sequence, IO Graph, Statistics Tree, and VoIP Calls dialogs
subclasses of WiresharkDialog.
Remove "Stats Tree" from Statistics Tree dialog titles. Don't complain
if the user opens more than one instance of the dialog.
Use the applicationName property in WiresharkApplication instead of a
separate variable.
Add a preexisting item to the IO Graph bug list (hovering when the file
is closed clears the graph).
Change-Id: I8411a25305d00b16e0d4a82fa50a9bad5c85b239
Reviewed-on: https://code.wireshark.org/review/6125
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I40d0c8253743183aecef252040b7dd6742ae5c71
Reviewed-on: https://code.wireshark.org/review/5934
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>