For our test in check_dcid_on_coalesced_packet, check the *last*
QUIC packet in the frame so far, not the first packet in the
frame.
Only create the quic_packet structure after checking for a coalesced
packet, so that the last QUIC packet in the frame is the previous
one, not the current one.
What happens if 0-RTT packets are lost and resent? There's an
alternative suggestion featuring checking if the ciphers are
initialized on the first pass that might work too, but if we
did that, what happens if the server Handshake is fragmented,
reassembled, and the server sent some "0.5-RTT" data after the
last fragment but then had to resend a different Handshake fragment
later? We'd still get some 1-RTT data before the handshake was done.
Fix#19665 while still not upsetting #19503.
The uplink and downlink bit rate items, and the maximum SDU size,
are contained in a single octet but added to the tree using
proto_tree_add_uint_format[_value] after multiplying by various factors,
so the values don't actually fit in a FT_UINT8. The fields need
to be large enough to fit the largest value added after transformation.
The filter engine won't allow filters for values outside the field
range, e.g.
$ ./run/dftest -s 'gtp.qos_max_sdu_size == 1500'
Filter:
gtp.qos_max_sdu_size == 1500
Error: "1500" too big for this field, maximum 255.
gtp.qos_max_sdu_size == 1500
^~~~
After:
$ ./run/dftest -s 'gtp.qos_max_sdu_size == 1500'
Filter:
gtp.qos_max_sdu_size == 1500
Syntax tree:
0 TEST_ANY_EQ:
1 FIELD(gtp.qos_max_sdu_size <FT_UINT16>)
1 FVALUE(1500 <FT_UINT16>)
Instructions:
0000 READ_TREE gtp.qos_max_sdu_size -> R0
0001 IF_FALSE_GOTO 3
0002 ANY_EQ R0 == 1500
0003 RETURN
Allow matching against 64-bit extended value strings the same
way as other value strings.
The IAX2 sample capture on the Wiki is a good test of this. Previously
the matches operator would never match, and comparison operators we not
allowed.
Before:
$ ./run/dftest -s 'iax2.voice.codec == "GSM compression"'
Filter:
iax2.voice.codec == "GSM compression"
Error: "GSM compression" cannot be found among the possible values for iax2.voice.codec.
iax2.voice.codec == "GSM compression"
^~~~~~~~~~~~~~~~~
After:
$ ./run/dftest -s 'iax2.voice.codec == "GSM compression"'
Filter:
iax2.voice.codec == "GSM compression"
Syntax tree:
0 TEST_ANY_EQ:
1 FIELD(iax2.voice.codec <FT_UINT64>)
1 FVALUE(2 <FT_UINT64>)
Instructions:
0000 READ_TREE iax2.voice.codec -> R0
0001 IF_FALSE_GOTO 3
0002 ANY_EQ R0 == 2
0003 RETURN
Rework the changes from 428f222853
a little bit to restore the ability to start a capture from
the extcap options dialog.
When the the dialog is opened for configuration, present both the
Save and the Start button. Continue to only have Start when the
dialog was spawned because the user wanted to start a capture
but a mandatory parameter was not configured.
Use the default QDialogButtonBox "Discard/Close without Saving"
button when closing the dialog without saving the user input
for new preferences.
Fix#19199
Reduce false positives of the CLTP on UDP dissector (RFC 1240)
by looking at the parameters as well and also ruling out length
indicator zero.
See https://ask.wireshark.org/question/31455/i-see-a-malformed-packet-in-wireshark-from-a-google-ip-address-on-port-2400-using-r-goose-protocol-what-could-this-be/
RFC 1240 was rendered Historic by RFC 2556, which noted that
"at this time there do not seem to be any implementations" and
recommended TPKT (ISO on TCP) instead.
However, R-GOOSE does use RFC 1240. In practice, it seems like
R-GOOSE uses the IANA registered port for ISO-TSAP, 102, just like
TPKT does on TCP. Perhaps we should register the dissector to that
port instead of a heuristic dissector if someone can confirm that.
Move the dissector from goose to ositp. This doesn't cause any
preference issues because heuristic dissectors are saved in the
preference file by name and the name won't change.
The documentation, both man page and help, claims that text2pcap
automatically sets the encapsulation to WIRESHARK_UPPER_PDU if
-P is given. Make the behavior match the documentation.
The TPNCP dissector depends upon a resource file, tpncp.dat, being loaded
during initialization. If a non-default tpncp.dat was used, the TPNCP
dissector could potentially perform some operations beyond the bounds of a
fixed-size array while loading tpncp.dat.
If a non-default tpncp.dat was used and an attempt was made to dissect
malformed TPNCP traffic, the TPNCP dissector could potentially perform a read
beyond the end of an array.
This change adds explicit bounds-checks to eliminate these possible OOB
accesses.
There is zero chance of this being triggered in a default unmodified
installation of Wireshark: Loading of the tpncp.dat file is conditional on a
preference setting which defaults to FALSE, and even if it is configured to
TRUE, the included tpncp.dat does not trigger either of these OOB operations.
It still seems worthwhile to make the parser and dissector generally more
robust.
Fix
```
/builds/wireshark/wireshark/epan/dissectors/file-jpeg.c:773:1: warning: function 'process_tiff_ifd_chain' is within a recursive call chain [misc-no-recursion]
773 | process_tiff_ifd_chain(proto_tree *tree, tvbuff_t *tvb, packet_info *pinfo,
| ^
/builds/wireshark/wireshark/epan/dissectors/file-jpeg.c:773:1: note: example recursive call chain, starting from function 'process_tiff_ifd_chain'
/builds/wireshark/wireshark/epan/dissectors/file-jpeg.c:896:37: note: Frame #1: function 'process_tiff_ifd_chain' calls function 'process_tiff_ifd_chain' here:
896 | process_tiff_ifd_chain(tree, tvb, pinfo, encoding,
| ^
/builds/wireshark/wireshark/epan/dissectors/file-jpeg.c:896:37: note: ... which was the starting point of the recursive call chain; there may be other cycles
```
- Move all basic dissect_thrift_t_<type> implementations into
dissect_thrift_raw_<type> that takes an additional dissector_t
parameter.
- All dissect_thrift_t_<type> just calls dissect_thrift_raw_<type>
with a NULL raw dissector.
- When the dissector_t parameter is set, create a sub-tvbuff_t pointing
to the raw content of the simple type (integral or binary).
- There are 2 specific cases within the TCompactProtocol part:
1. For booleans, the sub-dissector is responsible for using only the
least significant bit as the boolean value. The most obvious use
of the boolean raw sub-dissector is the use of a true_false_string.
2. For varint, we manufacture a tvbuff_t containing the big-endian
value of the right size to be the same as TBinaryProtocol.
- Allow the raw sub-dissector to push the responsibility back to the
generic dissector using thrift_opt_t.use_std_dissector = TRUE.
A common use case for that is a specific dissection for some values
only in a key/value map (configuration keys).
- Add a public dissect_thrift_t_raw_data() function that takes a type
for dispatch as well as the dissector_t.
Fix
```
wireshark/epan/dissectors/packet-isis-lsp.c:3431:1: warning: function 'dissect_sub_clv_tlv_22_22_23_141_222_223' is within a recursive call chain [misc-no-recursion]
3431 | dissect_sub_clv_tlv_22_22_23_141_222_223(tvbuff_t *tvb, packet_info* pinfo, proto_tree *tree,
| ^
wireshark/epan/dissectors/packet-isis-lsp.c:3431:1: note: example recursive call chain, starting from function 'dissect_sub_clv_tlv_22_22_23_141_222_223'
wireshark/epan/dissectors/packet-isis-lsp.c:3541:21: note: Frame #1: function 'dissect_sub_clv_tlv_22_22_23_141_222_223' calls function 'dissect_sub_clv_tlv_22_22_23_141_222_223' here:
3541 | dissect_sub_clv_tlv_22_22_23_141_222_223(tvb, pinfo, subtree, local_offset, local_len);
| ^
wireshark/epan/dissectors/packet-isis-lsp.c:3541:21: note: ... which was the starting point of the recursive call chain; there may be other cycles
```
Add Clang-Tidy suppressions as well.
If writing a separate extcap preferences file fails, always write the
main preference file.
If there's a directory of the same name as a module, silently ignore it.
Followup to !14436
If someone manually puts a directory, or a FIFO, or something
else (block device?) in a configuration directory with the same
name as a preference file, don't try to copy it and just silently
ignore it.
Add an initial Clang-Tidy configuration file which checks for recursion
and various clang analyzer issues.
Run Clang-Tidy in the "Clang + Code Checks" merge request job.
Add NOLINT suppressions where needed in wsutil, epan, and lemon.
Continue to write the format-based hidden preference for now.
Read both preferences; if the index-based preference is read, use it.
If not, fall back to the format-based preference.
Followup to 41930060b0