null) to the "fragment_items" structure, and don't pass that value into
"process_reassembled_data()", just have it use the value in the
"fragment_items" structure passed to it.
Make "process_reassembled_data()" capable of handling reassembly done by
"fragment_add_seq_check()", and use it in the ATP and 802.11 dissectors;
give them "reassembled_in" fields. Make "process_reassembled_data()"
handle only the case of a completed reassembly (fd_head != NULL) so that
we can use it in those dissectors without gunking the code up too much.
svn path=/trunk/; revision=7513
for reassembled frames - in Tethereal, there's only one frame_data
structure used for all frames. Instead, use the frame number itself as
the key.
Add a "fragment_add_check()" routine, for fragments where there's a
fragment offset rather than a fragment sequence number, which does the
same sort of thing as "fragment_add_seq_check()" - i.e., once reassembly
is done, it puts the reassembled fragment into a separate hash table, so
that there're only incomplete reassemblies in the fragment hash table.
That's necessary in order to handle cases where the packet ID field can
be reused.
Use that routine for IPv4 fragment reassembly - IP IDs can be reused (in
fact, RFC 791 suggests that doing so might be a feature:
It is appropriate for some higher level protocols to choose the
identifier. For example, TCP protocol modules may retransmit an
identical TCP segment, and the probability for correct reception
would be enhanced if the retransmission carried the same identifier
as the original transmission since fragments of either datagram
could be used to construct a correct TCP segment.
and RFC 1122 says that it's permitted to do so, although it also says
"we believe that retransmitting the same Identification field is not
useful":
3.2.1.5 Identification: RFC-791 Section 3.2
When sending an identical copy of an earlier datagram, a
host MAY optionally retain the same Identification field in
the copy.
DISCUSSION:
Some Internet protocol experts have maintained that
when a host sends an identical copy of an earlier
datagram, the new copy should contain the same
Identification value as the original. There are two
suggested advantages: (1) if the datagrams are
fragmented and some of the fragments are lost, the
receiver may be able to reconstruct a complete datagram
from fragments of the original and the copies; (2) a
congested gateway might use the IP Identification field
(and Fragment Offset) to discard duplicate datagrams
from the queue.
However, the observed patterns of datagram loss in the
Internet do not favor the probability of retransmitted
fragments filling reassembly gaps, while other
mechanisms (e.g., TCP repacketizing upon
retransmission) tend to prevent retransmission of an
identical datagram [IP:9]. Therefore, we believe that
retransmitting the same Identification field is not
useful. Also, a connectionless transport protocol like
UDP would require the cooperation of the application
programs to retain the same Identification value in
identical datagrams.
and, in any case, I've seen that in at least one capture, and it
confuses the current reassembly code).
Unfortunately, that means that fragments other than the last fragment
can't be tagged with the frame number in which the reassembly was done;
see the comment in packet-ip.c for a discussion of that problem.
svn path=/trunk/; revision=7506
called from the frame where the ip packet was reassembled instead of from each fragment.
For fragments, put [Reassembled in #xx] in the summary pane so it is easy
to see which fragments are successfully reassembled and which are not.
For fragments, add a "This fragment is reassembled in:xx" to the tree
pane so and make it FT_FRAMENUM so it is easy to jump top the reassembled ip packet.
svn path=/trunk/; revision=7489
Since this value has no human readable meaning it should be displayed in HEX only but make ethereal also display the "wrong" base to enhance human compatibility.
svn path=/trunk/; revision=7471
attempt reassembly of a higher-level packet that includes the
lower-level packet, use "tvb_bytes_exist()" to check whether all the
data that's to be included in the reassembly is available, rather than
by checking whether the packet is short.
Add some checks of that sort that were missing.
Use the reported length of the packet when doing reassembly.
Make the "iphdrlen" field of a "packet_info" structure be the length of
the IP header in bytes, not in 4-byte words.
svn path=/trunk/; revision=7274
belongs, as that's redundant.
Fix a bunch of cases where that was done, and map the old name to the
new name.
Instead of marking "mtp3.mtp3_standard" as obsolete, map it to
"mtp3.standard".
svn path=/trunk/; revision=7030
addresses and the protocol type, as supplied by BPF; on Linux, they *do*
have an offset field, as supplied by PF_PACKET sockets. Add a new
WTAP_ENCAP_ARCNET_LINUX, with packets that include the offset field, and
don't dissect an offset in WTAP_ENCAP_ARCNET packets.
Map a libpcap link-layer type of 129 to WTAP_ENCAP_ARCNET_LINUX; that
value was recently assigned to Linux-style ARCNET.
Add some more ARCNET protocol IDs.
For most protocol IDs, dissect an ATA 878.2 fragmentation header; don't
do it for RFC 1051 IP and ARP, and Diagnose packets. Set the length of
the ARCNET protocol tree item appropriately.
Dissect both the RFC 1051 and RFC 1201 styles of IP and ARP over ARCNET,
and dissect the RFC 1201 style of RARP as well.
svn path=/trunk/; revision=6981
error packets, the copy of the packet that got the error, rather than
doing it in the CLNP dissector and the ICMP dissector and the ICMPv6
dissector and the PPP dissector for various control protocols; have it
do that work iff "pinfo->in_error_pkt" is set.
svn path=/trunk/; revision=6942
state of the columns and the current protocol, and restore them when
done. Also, cache BoundsError and, if we get a BoundsError, restore
them and then re-throw the BoundsError, so we see a "Short Frame"
indication if the frame was cut off by the snapshot length.
svn path=/trunk/; revision=6941
as you dissect it, so we can dissect packets that are cut short before
the end of an IP header.
Check for an IP total length less than the header length.
svn path=/trunk/; revision=6921
Check the next header type - properly handling extension headers - in
"capture_ipv6()".
Get rid of the count of IPv6 packets - we break that down in
"capture_ipv6()" now.
Fix a typo.
svn path=/trunk/; revision=6510
sequence numbers or offsets and are thus assumed to be received in order
with no duplicates or dropped fragments (e.g., for NetBIOS Frame, where
802.2 LLC guarantees in-order delivery to NetBIOS with no duplicates or
dropped fragments).
"show_fragment_tree()' and "show_fragment_seq_tree()" don't modify the
"fragment_items" to which the "fit" argument points, so make that
argument a "const fragment_items *".
Make all the "fragment_items" tables "static" (as they're not used
outside the modules defining them) and "const" (as they're not
modified).
Add support for reassembly of NetBIOS fragmented requests and responses.
Get rid of an unnecessary include of "packet-tr.c" in the NetBIOS
dissector, and make its table of dissection function pointers static.
Fix some typos in the AppleTalk and NetBIOS dissectors.
svn path=/trunk/; revision=6491
equivalents for the toplevel directory. The removal of winsock2.h will
hopefully not cause any problems under MSVC++, as those files using
struct timeval still include wtap.h, which still includes winsock2.h.
svn path=/trunk/; revision=5932
Change struct addr to guint32 which is the way it is used
anyway.
Use the GLib macros to convert from network to host byte order.
svn path=/trunk/; revision=5878
but for stuff reassembled with "fragment_add_seq()" or
"fragment_add_seq_check()".
Add a "fragment tag" string to the "fragment_items", so that packets
with fragmentation errors can be properly flagged as having "Illegal
fragments" or "Illegal segments" depending on the term used with the
protocol in question.
Make all the dissectors that can use "show_fragment_tree()" or
"show_fragment_seq_tree()", and don't already use them, do so.
svn path=/trunk/; revision=5644
task of creating a fregment tree for the fragmented packets.
Having this identical code to create this tree in every dissector that does
PDU reassembly is a huge waste and duplication of code.
Updated IP, SMB and DCERPC to use the new function.
svn path=/trunk/; revision=5626
in the "packet_info" structure instead, as we don't need a pointer for
every single frame in the capture file, just for each frame for which we
currently have an open "epan_dissect_t".
svn path=/trunk/; revision=5614
Use the reported length, not the captured length, of a tvbuff when
scanning through it.
Mark unused arguments that can't be eliminated as unused.
svn path=/trunk/; revision=5058
top-level item correspond to the reassembled data, and make the item for
each fragment/segment correspond to the part of that reassembled data
that came from that fragment/segment.
svn path=/trunk/; revision=5025
"data source" has a name and a top-level tvbuff, and frames can have a
list of data sources associated with them.
Use the tvbuff pointer to determine which data source is the data source
for a given field; this means we don't have to worry about multiple data
sources with the same name - the only thing the name does is label the
notebook tab for the display of the data source, and label the hex dump
of the data source in print/Tethereal output.
Clean up a bunch of things discovered in the process of doing the above.
svn path=/trunk/; revision=4749
about them being trashed by setjmp/longjmp (does GCC there stuff them
into registers? They're bigger than 64 bits, so they don't even fit
into a single register on Alpha).
svn path=/trunk/; revision=4636
"epan/..." pathnames, so as to avoid collisions with header files in any
of the directories in which we look (e.g., "proto.h", as some other
package has its own "proto.h" file which it installs in the top-level
include directory).
Don't add "-I" flags to search "epan", as that's no longer necessary
(and we want includes of "epan" headers to fail if the "epan/" is left
out, so that we don't re-introduce includes lacking "epan/").
svn path=/trunk/; revision=4586
a fragment unless we've captured all the data in the fragment and (in
IPv4 and CLNP) it has a valid checksum, so that if the first fragment is
a short frame or a frame with an invalid checksum, we'll treat it as if
reassembly weren't enabled, and will dissect what data we have in it,
rather than not dissecting *any* of the fragments above the IP/CLNP
layer.
svn path=/trunk/; revision=4575
"dissect_frame()" to indicate whether a ReportedBoundsError was due to
the packet being malformed (i.e., the packet was shorter than it's
supposed to be, so the dissector went past the end trying to extract
fields that were supposed to be there) or due to it not being
reassembled (i.e., the packet was fragmented, and we didn't reassemble
it, but just treated the first fragment as the entire packet, so the
dissector went past the end trying to extract fields that were partially
or completely in fragments after that). Mark the latter as being
unreasembled rather than malformed.
Properly initialize, save, and restore that field, and properly set it,
so that works.
svn path=/trunk/; revision=4555
the list of segments in a desegmented PDU as unsigned, rather than
signed.
Fix some other displays of unsigned quantities with "%d" while we're at
it.
svn path=/trunk/; revision=4516
- Cleaned up TSpec and Flowspec support to handle multiple parameters
- Added support for Compression Hint (RFC3006)
- Added support for DCLASS (RFC2996)
- Corrected some bugs in support for Null Service (RFC2997)
svn path=/trunk/; revision=4459
structure to the "packet_info" structure; only stuff that's permanently
stored with each frame should be in the "frame_data" structure, and the
"column_info" structure is not guaranteed to hold the column values for
that frame at all times - it was only in the "frame_data" structure so
that it could be passed to dissectors, and, as all dissectors are now
passed a pointer to a "packet_info" structure, it could just as well be
put in the "packet_info" structure.
That saves memory, by shrinking the "frame_data" structure (there's one
of those per frame), and also lets us clean up the code a bit.
svn path=/trunk/; revision=4370
specifies how the selector values used as keys in those tables are to be
displayed, and the title to use when displaying the table.
Use that information in the code to display the initial and current
entries of various dissector tables.
Have the dissector for BACnet APDUs register itself by name, and have
the BACnet NPDU dissector call it iff the BAC_CONTROL_NET bit isn't set,
rather than doing it with a dissector table.
svn path=/trunk/; revision=4358
take a dissector handle as an argument, rather than a pointer to a
dissector function and a protocol ID. Associate dissector handles with
dissector table entries.
svn path=/trunk/; revision=4308
identifier, but means X.29 when used as an X.263/ISO 9577 secondary
protocol identifier.
Add support for the IPv6 NLPID, and Ethernet type, in more places.
Fix up the handling of the user data of a CALL REQUEST packet to more
correctly distinguish between user data containing an NLPID and user
data containing an X.264/ISO 11570 UN TPDU. If it's an NLPID, use
"nlpid_vals" to show its value.
Put that user data in a subtree.
Create a new "x.25.spi" dissector table, for protocols running atop
X.25, rather than having a built-in switch statement, so that other
protocols can register themselves by NLPID.
svn path=/trunk/; revision=4300
structure, we may have to worry about it in more places than the places
that *used* to set "pi.len" and "pi.captured_len", so there's no point
in just saving and restoring it there. We'll remove those
saves/restores, and worry about saves and restores when we find a
problem.
svn path=/trunk/; revision=4245
of packet data captured.
Make the "BYTES_ARE_IN_FRAME()" macro take a "captured length of the
packet" argument.
Add some length checks to capture routines.
svn path=/trunk/; revision=4235
structure, the check for a null tvbuff pointer in "alloc_field_info()",
and the "tvb_create_from_top()" macro; they're no longer needed, as
there's no non-tvbuffified dissector code remaining.
svn path=/trunk/; revision=4205
Frascone.
Small white-space fix.
Display the preference level in router advertisements as signed, not
unsigned, as per RFC 1256, which says it's a "signed, twos-complement
value".
svn path=/trunk/; revision=4118
stuff currently being dissected is part of a packet included in an error
packet (e.g., an ICMP Unreachable packet). Have the TCP dissector not
bother doing reassembly if the TCP segment is part of an error packet,
rather than an actual TCP transmission; other dissectors might want to
treat those packets specially as well.
Add to the "tcpinfo" structure a flag indicating whether the URG flag
was set, rather than having the zero or non-zero value of the urgent
pointer indicate that. (Yes, at least as I read RFC 793, a zero urgent
pointer value isn't useful, as it means "the stuff before this segment
is urgent", but it's certainly possible to put onto the wire a TCP
segment with URG set and a zero urgent pointer.)
Don't dissect the TCP header by grabbing the entire header with
"tvb_memcpy()" and then pulling stuff out of it - extract stuff with
individual tvbuff calls, and put stuff into the protocol tree and the
Info column as we extract it, so that we can dissect a partial header.
This lets us, for example, get the source and destination ports from the
TCP header of the part of a TCP segment included in a minimum-length
ICMPv4 error packet.
svn path=/trunk/; revision=3986