This change adds a protocol dissector for the Management Component
Transport Protocol (MCTP). This is a failry simple datagram-based
protocol for messaging between components within a single platform,
typically over I2C, serial or PCIe.
This dissector just implements the header fields, and sequence-number
based message reassembly. Inner protocols will be added as follow-up
changes.
Linux has support for AF_MCTP data, so decode from the MCTP SLL ltype.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Use host byte-order with AT_NUMERIC to make it more generic
and practical.
Change openSAFETY to pass addresses in host byte-order (the
previous code assumed they were in little-endian).
Plus a few cleanups.
Add a numeric address type analog to StringZ for
protocols who only use numeric values as addresses
with no further handling.
e.g. IAT protocols which only enumerate the devices
On the first packet of the conversation, the MPA layer is
dissected correctly followed by the DDP, RDMAP, RPC-over-RDMA,
RPC and NFS layers. The MPA layer sets the TCP conversation as
MPA protocol but when it dissects the RPC layer it also sets
the TCP conversation as RPC protocol thus overwriting the previous
protocol.
Added new port type PT_IWARP_MPA so that when the RPC layer
is dissected it does not overwrite the default protocol for
the TCP conversation which has already been set to MPA.
Fixes#15869.
This header was installed incorrectly to epan/wmem_scopes.h.
Instead of creating additional installation rules for a single
header in a subfolder (kept for backward compatibility) just
rename the standard "epan/wmem/wmem.h" include to
"epan/wmem_scopes.h" and fix the documentation.
Now the header is installed *correctly* to epan/wmem_scopes.h.
Automated find/replace of wmem_packet_scope() with pinfo->pool in all
files where it didn't cause a build failure.
I also tweaked a few of the docs which got caught up.
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Replace with conversation API that limits the "endpoint" to a single
uint32 value.
The intention is to eventually have "layered" endpoints, because circuit_id
was used in cases where src/dest port have already been populated (and
are used for layers above). Those src/dest ports should just be treated
as just another endpoint, but we currently only have support for one.
Change-Id: Ic6aa7ef0241275aa4dfde9459194369b48c72960
Reviewed-on: https://code.wireshark.org/review/24369
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Id007a3df5442cf4d21263acb17303b6d735aaa7d
Reviewed-on: https://code.wireshark.org/review/24311
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the few necessary conversation APIs to make conversion possible.
Change-Id: I775f23005c48cacd2be342bdc704af4738f0789c
Reviewed-on: https://code.wireshark.org/review/24310
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Id5857a58513c38dd0ab5b30b61113bcc14e1ecee
Reviewed-on: https://code.wireshark.org/review/24258
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Iab03ebbfc982bf7182851f63c17fa59bc71d7709
Reviewed-on: https://code.wireshark.org/review/24219
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add endpoint information to the packet_info structure for dissectors
to potentially use as their data to create conversations.
This patch includes a simple "example" of using conversation_create_endpoint
with TDMoP. The assignment of the PT_TDMOP "port type" has been replaced by
setting ENDPOINT_TDMOP within the endpoint structure. Then when subdissectors
of TDMoP call find_or_create_conversation(), it implicitly picks up the
conversation information set by TDMoP
Change-Id: I11dc29989cccd3b0f0349ee901babb455ca02d19
Reviewed-on: https://code.wireshark.org/review/24190
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Andrew Chernyh <andrew.chernyh@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
NCP and SBCCS values used for conversation (endpoints) and not
to pass "type" to subdissectors.
Change-Id: I56a13d2bb7d718b340e9b5a102c43f6e0012bfb9
Reviewed-on: https://code.wireshark.org/review/24174
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
For the moment this mirrors the port_type enumeration (PT_XXX), but the
intent is to move away from using "port types", eliminating most (if not
all)
Added conversation_pt_to_endpoint_type() so that conversations deal with the
correct enumeration. This is for dissector that use pinfo->ptype as input
to conversation APIs. Explicit use of port types are converted to using
ENDPOINT_XXX type.
Change-Id: Ia0bf553a3943b702c921f185407e03ce93ebf0ef
Reviewed-on: https://code.wireshark.org/review/24166
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
That allows a parallel typedef of ws_in4_addr for guint32.
Change-Id: I03b230247065e0e3840eb87635315a8e523ef562
Reviewed-on: https://code.wireshark.org/review/24073
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This will copy an address's "byte format" into a buffer. The original
intended design is for export_pdu functionality, which tries to do
this "manually" for many address types (and creates undesired dependencies)
The default functionality if a "byte format function" isn't provided
(currently the case for all address types) is a memcpy of the address
data. Providing "address to byte" functions to aid export PDU
functionality will be provided later.
Change-Id: I3703f9e617a8cef09165ad53a0f98c6372676b9b
Reviewed-on: https://code.wireshark.org/review/16070
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
proto.c still has to deal with FT_VINES, but maybe that
can be refactored to the dissector too.
Change-Id: Iee04eed3b75f91cb62bb7b625dd44baeeb9aebb3
Reviewed-on: https://code.wireshark.org/review/16069
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This required some hacking in the conversation table handling, but
still seemed worth it as USB address is not widely used.
Maybe a "is_stringlike" property for address types...
Change-Id: I628a15c17cb1f595bb292130867adbc5bea0f41a
Reviewed-on: https://code.wireshark.org/review/16068
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The formatting of the address type is determined by a preference in
packet-mtp3.c, so just make MTP3 register the address type.
Use address_type_get_by_name in other dissectors (and export_pdu)
to use the address type.
Change-Id: Ifb32d7de27aeaa23cee8e803e25ffb3c905547b5
Reviewed-on: https://code.wireshark.org/review/15856
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Don't compare the data if there's none to compare.
Change-Id: Ib0e3541e448127869d19afddfc71bb441dba5874
Reviewed-on: https://code.wireshark.org/review/15840
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fail if:
1) you have an AT_NONE address with data;
2) you have a non-AT_NONE address with a zero length and a
non-null data pointer, or with a non-zero length and a null
data pointer.
When comparing addresses for equality, just make sure the types are the
same, the lengths are the same and, if the lengths are non-zero, the
data is the same; don't treat AT_NONE specially - the "lengths are
non-zero" check will make sure we do the right thing.
Make sure when we create an AT_NONE address it has a zero length and
null data pointer.
Change-Id: I5c452ef0d140c2d9aef3004f1cfd124a95b78fb2
Reviewed-on: https://code.wireshark.org/review/15839
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Bug: 12295
Change-Id: I875308a16b11023a691d34057c7f8561a15aa598
Reviewed-on: https://code.wireshark.org/review/14649
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Catch errors like bug 12205 with an assertion.
Change-Id: I17381c92dfb22912e53eb20f6436adfa15d67e71
Reviewed-on: https://code.wireshark.org/review/14251
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Try to improve address API and also fix some constness warnings
by not overloading the 'data' pointer to store malloc'ed buffers
(use private pointer for that instead).
Second try, now passing test suite.
Change-Id: Idc101cd866b6d4f13500c9d59da5c7a38847fb7f
Reviewed-on: https://code.wireshark.org/review/13946
Petri-Dish: João Valverde <j@v6e.pt>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
define a function to dissect the CRC depending on the card type
add a circuit for an activated card to keep track of the card type
define a new circuit type CT_ISO1443 for this purpose, the circuit ID is
always 0 as we support only a single active card
Change-Id: I7250f834301612ba50743258ca7bdbe0199de3ea
Reviewed-on: https://code.wireshark.org/review/13908
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
This reverts commit 13ec77a9fc.
This commit introduces a segmentation fault for Lua code (uncovered by the test suite).
Change-Id: Ibc273d1915cda9632697b9f138f0ae104d3fb65e
Reviewed-on: https://code.wireshark.org/review/13813
Reviewed-by: João Valverde <j@v6e.pt>
Try to improve 'address' API (to be easier/safer) and also avoid
some constness warnings by not overloading the 'data' pointer to
store malloc'ed buffers (use private pointer for that instead).
Change-Id: I7456516b12c67620ceadac447907c12f5905bd49
Reviewed-on: https://code.wireshark.org/review/13463
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: I8bc9af431e70243b05f4f0ce8c2b8ee451383788
Reviewed-on: https://code.wireshark.org/review/11463
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Remove calls SET_ADDRESS, CMP_ADDRESS, ADDRESSES_EQUAL, COPY_ADDRESS, COPY_ADDRESS_SHALLOW, and ADD_ADDRESS_TO_HASH since they are no longer used.
Change-Id: I53fa4cfda756d8cef8815ad0324a3b9d9f9cd490
Reviewed-on: https://code.wireshark.org/review/11238
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Instead of splitting the stats into two lists as with the GTK+ UI, add
everything to an expandable tree. This allows viewing nodes on more than
one network.
Rename the top-level Bluetooth menu item to Wireless and put the WLAN
stats dialog there.
The Qt UI matches SSIDs (WlanNetworkTreeWidgetItem::isMatch) a bit
differently than the GTK+ UI. Try to make the logic as plain as possible
since we'll likely have to update it in the future.
The addition of a custom BSSID address types means that we can't assume
that everything is AT_ETHER. Add routines for checking for broadcast
BSSIDs and comparing only the data portions of addresses.
Move PercentBarDelegate into its own module. Use it in
WlanStatisticsDialog.
Change-Id: Ie4214eb00671a890871380c4a07213ebfb7585c6
Reviewed-on: https://code.wireshark.org/review/10171
Reviewed-by: Gerald Combs <gerald@wireshark.org>
memcpy(NULL, NULL, 0) isn't guaranteed by ISO C90 to work, so don't do
it. Check whether the length is zero, and don't copy if it is. (If the
count is non-zero and the pointer is null, that's an error, and we
should fail there, so base the test on the length, not the pointer.)
Change-Id: I0b3dc1541b52670d8fef459754c9494cfcc59e5d
Reviewed-on: https://code.wireshark.org/review/9633
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The following parameters of WMEM_COPY_ADDRESS(scope, to, from) are not documented: parameter 'scope'
Change-Id: Ice1bddb55839f7aa839bdf6dec74211cf7e4d9dc
Reviewed-on: https://code.wireshark.org/review/8227
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This allows for even more cleanup with respect to how address types are handled, including removing address_to_str.c. Most of the functionality was folded into address_types.c, but the remainder was just dispersed because it didn't make sense to keep the file.
Change-Id: Id4e9391f0c3c26eff8c27b362e4f7a1970d718b4
Reviewed-on: https://code.wireshark.org/review/7038
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Using the new address type registration, dissectors can create their own address types with their own (column) filters attached to them, eliminating the need for an address to keep track of a hf_ field.
Change-Id: I2bbec256a056f403a7ac9880d5d76a0b2a21b221
Ping-Bug: 7728
Reviewed-on: https://code.wireshark.org/review/7037
Reviewed-by: Michael Mann <mmann78@netscape.net>
Information about dissector (filter) fields should be kept in a dissector as much as possible. Supporting "column filter string" also allows other dissectors to create their own "address types" with different column filters (because AT_ETHER isn't always an "Ethernet" address).
This feature also allowed a few "dissector specific" address types to be moved to their own dissector.
Change-Id: Ie9024af4db62bc2ee4f8c9d28a1d807f706f45bf
Ping-Bug:7728
Reviewed-on: https://code.wireshark.org/review/7029
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Now address types are setup just like field types and must be registered with a structure that provides its string representation (and more things in the future). Address types that are limited to a single dissector are registered by the dissector. More "common" ones are globally registered. There are still a few that really belong in a dissector, but have other dependencies currently not accounted for in the address type support.
Many of the "address to string" conversions that involved g_sprintf have be changed to use more "performance friendly" methods (some at the cost of needing to_str-int.h)
Leaving all comments regarding this "solution" in address_to_str.c in until all have been implemented
Change-Id: I494f413e016b22859c44675def11135f228796e0
Reviewed-on: https://code.wireshark.org/review/7019
Reviewed-by: Michael Mann <mmann78@netscape.net>
Copy addresses with wmem-scope instead of (forced) seasonal scope. All existing instances were converted to wmem_file_scope, but the flexibility is there for other scopes.
Change-Id: I8e58837b9ef574ec7dd87e278470d7063ae8c1c2
Reviewed-on: https://code.wireshark.org/review/6564
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also, convert the "string" hf_ entries that used tvb_fcwwn_to_str as a string to use proto_tree_add_item with FT_FCWWN type.
Change-Id: I4ca77870499fd8239584a70874998b5d194a7167
Reviewed-on: https://code.wireshark.org/review/6036
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Jeremy Kerr