Rename the "ssl" protocol to "tls" and add an "ssl" alias. Prefer "TLS"
over "SSL" in user interface text and in the documentation.
Fix the test_tls_master_secret test while we're here.
Bug: 14922
Change-Id: Iab6ba2c7c4c0f8f6dd0f6d5d90fac5e9486612f8
Reviewed-on: https://code.wireshark.org/review/29649
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Replace $HOME with ~ in window title %F variable.
Optimize code to check if variable is used before doing replacement.
Change-Id: I95ef8505e50379d98fdb1661e09394d1ded7ecca
Reviewed-on: https://code.wireshark.org/review/29597
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add some new variables to be used in custom window title.
%F = file path of the capture file
%S = a conditional separator (" - ") that only shows when surrounded
by variables with values or static text
Change-Id: I20a60a3018cc86236f4991030eadb7f51681cc32
Reviewed-on: https://code.wireshark.org/review/29534
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
When legacy filter expressions preferences are present, be sure to
(1) save the dfilter_buttons file when updating the preferences file and
(2) save the preferences file after updating the dfilter_buttons file.
Without doing (1), the old buttons will be lost. Without (2), restarting
Wireshark will result in duplicate buttons. Only write the files if the
user actually made other changes to avoid breaking profiles by just
opening Wireshark.
Bug: 15114
Bug: 15121
Change-Id: I5b9417c34146c4450526781a20308c9c98fb44a1
Reviewed-on: https://code.wireshark.org/review/29488
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Always restore column visibility when loading packets to avoid some
situations where the column hidden state was incorrect.
This fixes the following scenario:
- Apply a column and hide it using the column popup menu
- Apply another column and remove it using the column popup menu
- Close and reopen the capture file
- Observe the hidden column is shown, but with wrong width
Change-Id: I00531907b2383c6605a2d62e8243092906037d0c
Reviewed-on: https://code.wireshark.org/review/29516
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Adding the null check fixes a bug that made wireshark crash
when right clicking a subtree which doesn't have any preferences
and if none of the parents had one either.
The problem was introduced in commit 589413d877
Change-Id: Ia5bbae0a58298f3e9d912e44f33589da1cbfacc9
Reviewed-on: https://code.wireshark.org/review/29455
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The g_base64_decode_inplace() does not handle zero length string
so add a guard for this before calling.
Bug: 15113
Change-Id: I89fa17dd62af238f4282835c317e5c8be6e0c8a1
Reviewed-on: https://code.wireshark.org/review/29428
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Replace ws_base64_decode_inplace() with g_base64_decode_inplace()
or g_base64_decode(), which was introduced in glib 2.12.
The only observed difference is a need for zero-terminate the buffer
after decoding.
Change-Id: Ia102d0d8e9bec575ffeddf448191a3f6de9fb1ed
Reviewed-on: https://code.wireshark.org/review/29382
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This setting was only used in GTK.
Change-Id: If184c61e4e081992e517f480b4faf129b81508c1
Reviewed-on: https://code.wireshark.org/review/29388
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
A ByteViewTab with 0 bytes is not useful, but may happen.
The crash could be reproduced with the following Lua code:
local t = ByteArray.new():tvb()
Change-Id: I256fd7fc2b91aa3c1161c46558c647308a3d564b
Reviewed-on: https://code.wireshark.org/review/29383
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The Lua fake item will not give preferences for the last protocol
in the packet, so avoid this. The Lua fake item is always added when
having a Lua post-dissector, even if the post-dissector does not add
any elements to the tree.
Change-Id: I43427bf522a32feebd44f192888e73b5607e6fff
Reviewed-on: https://code.wireshark.org/review/29377
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The special-case "text only" header field will not give preferences for the
selected protocol, so we have to traverse the parents to get a usable node.
Change-Id: I647f275839db337dedaeb67664402af1fe9f21c1
Reviewed-on: https://code.wireshark.org/review/29363
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add support for aliasing one protocol name to another and for filtering
using aliased fields. Mark aliased fields as deprecated.
Rename the BOOTP dissector to DHCP and alias "bootp" to "dhcp". This
lets you use both "dhcp.type" and "bootp.type" as display filter fields
without having to duplicate all 500+ DHCP/BOOTP fields.
To do:
- Add checks to proto.c:check_valid_filter_name_or_fail?
- Transition SSL to TLS.
- Rename packet-bootp.c to packet-dhcp.c?
Change-Id: I29977859995e8347d80b8e83f1618db441b10279
Ping-Bug: 14922
Reviewed-on: https://code.wireshark.org/review/29327
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We are exporting a registration function from libwireshark just
to have it passed back as a callback. Seems unnecessary.
Change-Id: I7621005c9be11691d319102326824c5e3520a6f3
Reviewed-on: https://code.wireshark.org/review/29328
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
The hint label in Show Packet Bytes shows information about the selected
field, and the user should be able to select this text using the mouse.
Change-Id: Ic969dbd07cb1fcd61d0e8f777692523a0fc5850b
Reviewed-on: https://code.wireshark.org/review/29259
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The Internals menu items were moved under the View menu a while back.
Fix an internals dialog title.
Change-Id: I78d61bf4f52bf9eb86cf7ff59fc036b9f7e846f5
Reviewed-on: https://code.wireshark.org/review/29228
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Ensure we remove the info status for a selected field when closing
a capture file to bring the text back to "Ready to load or capture".
Change-Id: I2946675b2c0bc47cb8c05c1d391ff8a0875e8c7f
Reviewed-on: https://code.wireshark.org/review/29216
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Store the association id instead of a pointer to the volatile
"sctp_assoc_info_t" structure because it gets freed after a rescan.
Bug: 14970
Change-Id: Id8fe2dfe3549bd711fc8ddef0770b217e83c2088
Fixes: v1.11.3-rc1-604-g796bf409b0 ("Add dialogs and graphs to analyse SCTP behavior similar to the GTK version.")
Reviewed-on: https://code.wireshark.org/review/28711
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename some of the columns - IFTREE_COL_NAME is the interface name,
IFTREE_COL_DESCRIPTION is the description/friendly name, and a new
IFTREE_COL_DISPLAY_NAME column is the display name (which may include
both the description and the interface name). Rename
IFTREE_COL_INTERFACE_COMMENT to just IFTREE_COL_COMMENT - there's no
*other* type of comment, and "IF" is short for "interface".
In the interface frame, use IFTREE_COL_DISPLAY_NAME, as that's the only
column that shows both and thus has something for all interfaces.
In the "Manage interfaces" dialog, put the description before the
interface name, as it was in earlier versions.
Change-Id: If0d959dcd4ca99913c941df00621da3c478233f6
Reviewed-on: https://code.wireshark.org/review/29090
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't show the display name, as that may include either the interface
name, which is already in another column, or the column comment, which
is also already in another column.
Change-Id: I12f81d9e4579b82267062bb5e4e745925ed382b7
Reviewed-on: https://code.wireshark.org/review/29087
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Windows is not the only OS with "friendly" names for interfaces; macOS
has them as well, and some *BSDs let you tag interfaces with names as
well.
The column headings for the "Interface Name" and the "Friendly Name"
were backwards.
Change-Id: I72543505cec9d479d8ab8aab3850daab3667805f
Reviewed-on: https://code.wireshark.org/review/29082
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's not a set of command-line options, it's information that's used
when showing summary information about the interface.
Change-Id: Ie1c3d998a3cc7cd8b54945186098ebae726cef11
Reviewed-on: https://code.wireshark.org/review/29070
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When the SCTP association contains a single DATA/SACK chunk in direction
the max and min TSN values are equal and as a result the Y axis range is
(maxTSN, maxTSN) or (0, 0) and the dots for the TSN are not visible
To fix this always set the Y axis maximum to maxTSN + 1 similar to the X
axis maximum of max_secs + 1
Also removed one unused local variable
Change-Id: Id38eb4dbd13a8ebbba98d4df00f3707331bd1464
Reviewed-on: https://code.wireshark.org/review/28862
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When the capture does not contains SCTP INIT and INAT_ACK packets the
startArwnd value is 0 (not set) and as a result the Y axis range is
(0,0) and the dots are not visible
Change-Id: Iafb1981e62f28fe09b106138836c866d0dbebb27
Reviewed-on: https://code.wireshark.org/review/28861
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Explain some of the magic numbers and other parts of the sparkline code.
Change-Id: Idfad30e773bd852ac021326467cf03ada91f6efc
Reviewed-on: https://code.wireshark.org/review/28874
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Those two members are leftovers from the gtk interface where a single
button was used. Current Qt interface uses three buttons so those two
members are no longer needed.
Change-Id: I10e8c6aa887582e21ceec87bc3021a49abcc34dd
Reviewed-on: https://code.wireshark.org/review/28834
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Every time the graph is redrawn new items are added to the vectors but
these items are never removed and the used memory increase over time
which for larger captures could be problematic.
Change-Id: I5f029d5f48e215aacf4a69fb7aef348d16df9846
Reviewed-on: https://code.wireshark.org/review/28782
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Remove MainWindow::createByteViewDialog, which was called once and
contained one line.
Change-Id: Ibe03db2c527b0a817d8b99df87d161405805bac3
Reviewed-on: https://code.wireshark.org/review/28733
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
QCustomPlot 1.3.1 includes a fix for a crash ("Fixed potential crash in
QCPGraph::pointDistance if getScatterPlotData returns empty list").
Full changelog: http://www.qcustomplot.com/release/1.3.2/changelog.txt
The new files are based on QCustomPlot-source.tar.gz (1.3.2) with
Alexis' typo and license header changes from v1.99.2rc0-479-gc411029a3c
("Update to QCustomPlot 1.3.0") applied. All successive Wireshark
patches up to v2.5.0rc0-854-g6f28f1a59e ("Fix MacOS build") were
applied. The Retina patches ("Fix QCustmPlot retina problems." and "QCP:
Fix retina label calculations.") gave conflicts due contextual changes
which I resolved by renaming newCachedLabel to cachedLabel (following
the change in upstream commit baaad24706187f5be0a68011c780b51c4de11558).
Bug: 14971
Change-Id: I5012cb5a867891b466cbf1898fe4c28cbd11ba20
Reviewed-on: https://code.wireshark.org/review/28732
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Construct MainWindow::df_combo_box_ in our initializer list, otherwise
anything that triggers a resizeEvent early on might result in an NPE.
Wait until everything is in place before calling setMinimumWidth.
Bug: 14979
Change-Id: I78b349f9c3ea53d8b1399a77169bbbd0a4a69191
Reviewed-on: https://code.wireshark.org/review/28728
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Ensure that columns with numbers are sorted according to their numeric
value instead of their alphabetical order.
Bug: 11460
Change-Id: I6ccfb9d3699c7e95de4ed31eb9424c5687661593
Reviewed-on: https://code.wireshark.org/review/28652
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For formats other than "Raw" and "UTF-8", the written file does not
match the actual stream data. It would be duplicated in strange ways.
Executing the "Save As" action twice while the dialog is open would also
write two different files (huh?).
As a quick fix, just replace the strange save logic by writing the text
field contents. A functional difference is that previously it would
write data while parsing the "follow data" list, now it uses the text
field contents. That data will now be truncated after 500 MB.
Bug: 14933
Change-Id: I498676389d0da3ac070346d6903bd2e6b0fc7674
Fixes: v1.11.0-rc1-2538-g80f9326b2f ("Add TCP/UDP/SSL Follow feature to QtShark")
Reviewed-on: https://code.wireshark.org/review/28663
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
It strips off all suffixes, which is not useful behavior; it assumes
that nobody uses "." for any purpose other than separating a file name
from an extension - 1994 called, they want their version of Windows
back (and UN*X called, too...).
For the "Saving XXX" status bar message, just use the entire last
component of the file name.
Change-Id: Ib34fde3e49cd791c7baf333eebb71a8dbd672c19
Reviewed-on: https://code.wireshark.org/review/28638
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Strip off only extensions that correspond to file types we know about;
QFileInfo::baseName() strips off *all* extensions, where "extension" is
"anything preceded by a .", so it turns foo.bar.pcap.gz into foo, not
foo.bar. We don't want that; instead, we strip off only those
extensions that correspond to file types we know how to read, so we'd
strip off .pcap.gz in foo.bar.pcap.gz, and strip off .pcap in
foo.bar.pcap, leaving foo.bar in both cases.
Change-Id: I5385921ad2f0fef815d52e9902fef15735fd9dae
Reviewed-on: https://code.wireshark.org/review/28636
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When switching from ASCII to other modes (such as Hex), the previous
text to packet number mapping was not cleared. This resulted in
using the wrong packet number when hovering over the packet data.
Change-Id: I29ba1786925490c33fc9181373a31d51f5091642
Reviewed-on: https://code.wireshark.org/review/28614
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Reverse the payload chunks list to achieve a running time of O(n) rather
than O(n²) for insertion of all chunks. Executing a RelWithDebInfo+ASAN
build with `tshark -r chargen-session.pcapng.gz -qz follow,tcp,hex,0`
previously took 11m5s to complete, but now finishes in 16 seconds.
Tested using a capture file with 152k TCP packets (from bug 11777).
Backport note: must update ui/gtk/follow_stream.c too.
Change-Id: Icf70d45f33d4399e53209fb6199d3809608c8d99
Reviewed-on: https://code.wireshark.org/review/28595
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For example, if the file is foo.pcap, make the default name for a saved
PDF of some graph be foo.pdf, as it was prior to 2.6, not foo.pcap.pdf.
Change-Id: Ide99c9c7fa1f3d16f829e731f968a209fbb52b8d
Reviewed-on: https://code.wireshark.org/review/28624
Reviewed-by: Guy Harris <guy@alum.mit.edu>
While we're at it, sort some method declarations and definitions, to
group the top-level summary/details/bytes yes/no options together, with
two groups of suboptions for summary and details below.
Bug: 14945
Change-Id: Id06dd64e44b18b13e2131482edef46aee3efbd63
Reviewed-on: https://code.wireshark.org/review/28620
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For filePath() and fileName(), just return a null string if we can't
convert from the native encoding to UTF-8 - those aren't used for
displaying, those are used for setting the main window's file name and
for generating names of files to save based on the capture file name.
Have fileDisplayName() just return the display name, without
"[closing]"/"[closed]" decoration or a special case for no file being
open (just return a null string if there's no file open), and have
fileTitle() return the decorated display name.
Change-Id: I244f318d5444dcf58527e5d38c4d073c28b73810
Reviewed-on: https://code.wireshark.org/review/28594
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That more closely matches the name of the file.h routine that it uses.
Change-Id: Ia206fb8331f4f3ad8035da9f6137ad2428d53a49
Reviewed-on: https://code.wireshark.org/review/28589
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That's needed to support the "proxy icon", so it can be dragged.
Change-Id: I1ad209cd43a2a6df9c52d076f6513780b0ac51be
Reviewed-on: https://code.wireshark.org/review/28587
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It now does the heavy lifting, so MainWindow::setTitlebarForCaptureFile()
doesn't have to duplicate it.
Change-Id: I97ded85306e625b2c67c3fde62a636ec6818a6f5
Reviewed-on: https://code.wireshark.org/review/28586
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't use CaptureFile.fileTitle() if you're constructing a pathname; use
it only if you're constructing a window title.
Change-Id: I40f225ddb07be2f7dc3ae03108dae816846f20c7
Reviewed-on: https://code.wireshark.org/review/28582
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For dialogs and auxiliary windows, if we have a live capture that hasn't
yet been saved to a permanent location, there's no good reason to show
the temporary file name in the title bar, as:
it's a random string that doesn't indicate where the capture was done
and that could confuse people (see, for example, the confusion in bug
14929, in which somebody referred to the "Follow TCP Stream" window as
the ".pcap dialog" because its title had ".pcap" at the end, due to
the capture file being a temporary file and its name showing up in the
title bar of that window);
it differs from what the main window title bar shows.
While we're at it, don't assume that the file name in the capture_file
structure is a UTF-8 string - some UN*Xes might not use UTF-8 for file
names.
Change-Id: I0d3dfd5d7f896ea37533daf7089b688710dbabf0
Reviewed-on: https://code.wireshark.org/review/28581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Closing a capture file while it is being loaded will result in a crash.
As a workaround, disallow closing the capture file. The requested action
(e.g. MainWindow::openCaptureFile) will be silently ignored.
While at it, protect process_specified_records (called when saving
files) similarly to cf_read and fix a crash that occurs when a capture
from the Capture Dialog is started while a file is being loaded:
file.c:360:cf_close: assertion failed: (cf->state != FILE_READ_IN_PROGRESS)
Bug: 10870 # moving rapidly between large files in a file set
Bug: 13594 # start capture while loading/saving file
Bug: 14351 # open another file while loading file
Change-Id: I6ce8f3163c3fa4869f0299e49909a32594326ce4
Reviewed-on: https://code.wireshark.org/review/28541
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
That makes it clearer that it's not a string, and avoids some type
complaints from change Ida7b98af8c44a52ddac2c4ab0702db2519a0c4af.
Update a comment while we're at it.
Change-Id: I6737bb2a7ff3b4d461700c641cb580194f7809e7
Reviewed-on: https://code.wireshark.org/review/28572
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer that it's not a string, and avoids some type
complaints from change Ida7b98af8c44a52ddac2c4ab0702db2519a0c4af.
Update a comment while we're at it.
Change-Id: Idba56f38d58d87f73aee41a11195371021a1328d
Reviewed-on: https://code.wireshark.org/review/28571
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When dragging on the wrong position in the toolbar, wireshark
crashes
Change-Id: I756e9caebc844d32e99e9fd3e338a872986b9e96
Reviewed-on: https://code.wireshark.org/review/28458
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
If the packet-testing expression for a coloring rule is set to an
invalid expression, disable the filter; this should provide at least
*some* indication to the user that it's not valid, although we should
really pop up a dialog or something - the little small-type notice below
the list of filters is *really* not all that obvious.
Ping-Bug: 14906
Change-Id: I3c036c3509520913db0a64c30bc1c57c0c7667bc
Reviewed-on: https://code.wireshark.org/review/28444
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Fix the prepare possibility of applying a display filter button
Change-Id: I85364b40272139f0d0c69a2735a876a3a5f5db7a
Reviewed-on: https://code.wireshark.org/review/28440
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Remove all filter toolbar related stuff into a separate class
and away from MainWindow
Change-Id: I36d937be6c2686b16a8d494213dc740d8d28efcb
Reviewed-on: https://code.wireshark.org/review/28432
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
*rtp_stream* -> rtpstream to follow common name
Change-Id: I381bc1cdb8206c5cfe67e94dd7fb1a5cb25f9c16
Reviewed-on: https://code.wireshark.org/review/28394
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_info_calc_t created
- rtpstream_info_calculate and rtpstream_info_calc_free functions created
- RTP code updated to use such functions
Change-Id: I1053a46cbd0cdef9d70382135da46e732b5af8b8
Reviewed-on: https://code.wireshark.org/review/28361
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_id_t is introduced and its related functions. It encapsulates comparsion of two rtpstreams.
- dest_* renamed to dst_*
- src_port and dst_port are 16bits only.
- sharkd_session.c use common id functions
- IAX2 part related to RTP updated to common *id* function
Change-Id: Id38728a4e5d80363480c7ce42ff9c6eaad069686
Reviewed-on: https://code.wireshark.org/review/28340
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Changes:
- rtpstream_packet renamed to rtpstream_packet_cb to follow *_cb pattern
- variables/types used in iax2_analysis_dialog were created as copy of *rtp* ones, but names were left as *rtp* -> *iax2*
- struct _rtp_stream_info replaced with rtp_stream_info_t
- there was tap-rtp-analysis.h, but no tap-rtp-analysis.c - related content was moved from tap-rtp-common.c
- *rtp_stream* functions renamed to *rtpstream*
- renamed rtp_stream_info_t to rtpstream_info_t to follow *rtpstream* pattern.
- renamed ui/rtp_stream.c rtpstream_draw -> rtpstream_draw_cb
Change-Id: Ib11ff5367cc464ea1b0c73432bc50b0eb9cd203e
Reviewed-on: https://code.wireshark.org/review/28299
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- Trivial by just doing it the C++ way
- Non-Trivial where the whole function can be put into the #ifdef instead of the variable use case
Change-Id: I034751b8a3c70211173f0c06c954def94450db46
Reviewed-on: https://code.wireshark.org/review/28311
Petri-Dish: Jörg Mayer <jmayer@loplof.de>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Make sure that the filter for VoIP calls includes RTP streams when calling
Prepare filter.
Bug: 13440
Change-Id: Ia55073151817b88b3fa6a3fd30f98fdf683621a4
Reviewed-on: https://code.wireshark.org/review/27955
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It means we don't know the active link-layer header type - probably
because the device can't be opened, so we can't get the default linktype
or the list of available linktypes - so show it as "Unknown".
Bug: 14847
Change-Id: I5a1ad360d2ae461e8db57e387679700a566b0949
Reviewed-on: https://code.wireshark.org/review/28185
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I296cc5801e8a5184aea6bdc7fb841cce0c4f7b1d
Reviewed-on: https://code.wireshark.org/review/28056
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The Qt UI's main module started out as ui/qt/main.cpp but was moved to
the top-level directory in order to appease Autotools. We don't need to
do that any more, so move it back.
Change-Id: Ic5bc0ed5b754e36cc2b9e682f2ca097781233dfd
Reviewed-on: https://code.wireshark.org/review/28090
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Set a foreground color when we add a field and protocol format range. On
some systems the highlight background is darker or lighter than the
normal background, and we need to adjust the foreground to match.
Add a note about correctly handling our hover rect color.
Change-Id: Ib6b50403dec889280eb3d27f3deb10150d22a599
Reviewed-on: https://code.wireshark.org/review/28076
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Currently exist two main pages within Wireshark. The first being
the main welcome page and the second the packet capture page. The
first is called "main_welcome.?" and the second is actually the
master_split_ object defined in main_window.h. The first being a
QFrame, the second not.
In preparation for future developments (dockable windows, multiple capture
files), this is being corrected, with the main welcome being renamed
as welcome_page as a first step
Change-Id: I40703e6ed15ff6f6b62b2a3cf31f5636ac6da9ec
Reviewed-on: https://code.wireshark.org/review/27949
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
master_split_ must be moved to a more prominent widget, as it is in actuality
the main widget of the application.
Change-Id: Id45b60f5f57c982c1890318eec9fa87ab61a9e19
Reviewed-on: https://code.wireshark.org/review/27942
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
There was an issue, where siblings where not copied correctly.
Bug:14355
Change-Id: I31611a6731f3f4de6b204c7ee708e42f0b7b170c
Reviewed-on: https://code.wireshark.org/review/27802
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Kenneth Soerensen <knnthsrnsn@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
In different versions of libpcap, pcap_compile() has a 3rd parameter
with or without const. Using a non-const variable, allow the auto
promotion to const possible, but not the vice-versa.
Fixes compilation on OpenBSD.
Change-Id: I72162a4ea419668b6222e84bf5525a6c48fddd52
Reviewed-on: https://code.wireshark.org/review/27896
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
FrameInformation was never deallocated, leaking the whole pinfo scope.
Fix a dealloc-alloc-mismatch (packet_data_ was g_memdup'd). Attach the
DataPrinter menu actions to the action group instead of the singleton
DataPrinter instance, this enables freeing the actions when the submenu
is gone rather than clearing this at program exit.
Reported by ASAN.
Change-Id: If13af94a60b07b0e52973ccc5c437ef987bfb394
Fixes: v2.5.0rc0-1627-g8a6ea0e454 ("Qt: Further cleanup ByteView")
Reviewed-on: https://code.wireshark.org/review/27844
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Reported by ASAN.
Change-Id: I0e7578d6583dc11312d95108331b6a743d7d5514
Reviewed-on: https://code.wireshark.org/review/27832
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Free the memory as documented.
Change-Id: I8a8842160be676bb08f5b93e795b9ed8edef2ede
Reviewed-on: https://code.wireshark.org/review/27829
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
USB has three possible tables, usb.device, usb.product and usb.protocol
(shown in that order in the Decode As dialog). For single packets with
no prior device descriptors, the last two tables have no valid selector
(integer zero). In such cases it seems more reasonable to use tables for
which a valid selector exists (for example, "usb.device").
Bug: 14717
Change-Id: I2319817fa11318a97519d8cfc912343b16224c12
Reviewed-on: https://code.wireshark.org/review/27820
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
"fillTable()" overwrites "sctp_assocs" with an external address.
Change-Id: I415d424f16a2306b1b79fde7b5f836458da14b16
Reviewed-on: https://code.wireshark.org/review/27833
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When an error occurs while saving packets using the Export Specified
Packets dialog (e.g. try to overwrite the opened capture file), the
dialog is displayed again. As PacketRangeGroupBox freed the packet
selection range, a crash (use-after-free) occurs.
Removes some unnecessary code in MainWindow::exportDissections as well.
Change-Id: I63898427eff7e71799d89c8a22246db8f93a9ff6
Fixes: v2.5.0rc0-968-g38b40acb2d ("Qt: fix a memory leak when exporting packets")
Reviewed-on: https://code.wireshark.org/review/27695
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The active selection color and inactive selection color can be configured via Edit / Preferences / Font and Colors
There are 3 styles that can be used for the selection color:
Default: legacy behavior
Flat: Use background and foreground color with no gradient.
Gradient: Use background and foreground color with a gradient.
Bug: 14714
Change-Id: Ieca293bb9830d2c5702949d0459d1d6f679e41e4
Reviewed-on: https://code.wireshark.org/review/27701
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Support doing Find Packet, search for next/previous marked packet and
search for next/previous time reference without having a packet selected
in the packet list.
Change-Id: I648b26365385d98155e905cda270e9e785b9f1da
Reviewed-on: https://code.wireshark.org/review/27752
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update menus when changing mark, ignore or time reference on a packet
to enable/disable entries accordingly.
Change-Id: Icb95b3371fe8183cdeea1b6b2c71d1d33f998dc0
Reviewed-on: https://code.wireshark.org/review/27737
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Do not start editing the first column for the first item in a UAT dialog.
This is the same behaviour as in UAT frame.
Change-Id: If8dd90c90301b4af9108cc5286d99f83f613a19e
Reviewed-on: https://code.wireshark.org/review/27708
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Set a minimum width for the main window so that we override the minimum
size set by the display filter combo.
Add a couple of comments and fixup a cast while we're here.
Bug: 13516
Change-Id: I6e994a7d06f5a966bb9bf8d3f4c4fc343cd466c8
Reviewed-on: https://code.wireshark.org/review/27697
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The i18n.qrc file is generated at cmake time while the .qm files are
also built as dependency of the AUTORCC process. The extraneous .qm
dependency of i18n.qrc possibly causes duplicate wireshark_zh_CN.qm
builds (see v2.9.0rc0-605-g644939ed9e), so remove it.
Change-Id: I629e7b809486a65b27158f66a7e62cfcf61657d3
Reviewed-on: https://code.wireshark.org/review/27633
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Remove some unused variables, favor list(APPEND X Y) over set(X ${X} Y),
use consistent capitalization and whitespace.
Change-Id: I2a90b55d29899393019a1aee3394b87ab12dda5b
Reviewed-on: https://code.wireshark.org/review/27625
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The Windows buildbot showed that .qm files are generated twice. This
resulted in rebuilding i18n.cpp, which resulted in rebuilding qtui,
which finally resulted in Wireshark.exe being built twice for no reason.
Assuming it is the same issue as commit v2.3.0rc0-3078-gaa9a0b3bf8,
avoid having multiple targets depend on the same output (.qm files).
This patch requires CMake 3.1 or newer.
Change-Id: Iffd8946701553b89c09504278afa4b16d2a0b5b4
Fixes: v2.5.0rc0-1366-gdfa893b1cf ("cmake: set CMAKE_AUTOUIC and CMAKE_AUTORCC to avoid CMP0071 warning")
Reviewed-on: https://code.wireshark.org/review/27620
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
sys/stat.h and sys/types.h date back to V7 UNIX, so they should be
present on all UN*Xes, and we're assuming they're available on Windows,
so, unless and until we ever support platforms that are neither UN*Xes
nor Windows, we don't need to check for them.
Remove the CMake checks for them, remove the HAVE_ values from
cmakeconfig.h.in, and remove all tests for the HAVE_ values.
Change-Id: I90bb2aab37958553673b03b52f4931d3b304b9d0
Reviewed-on: https://code.wireshark.org/review/27603
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add back the capture info dialog. Draw sparklines for each protocol.
Update the User's Guide.
Bug: 12004
Change-Id: I45be8a0df4752255831a8b139ee84bb34d675ba9
Reviewed-on: https://code.wireshark.org/review/27565
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a WiresharkFileDialog class, which is a thin wrapper around a few
QFileDialog functions that sets per-monitor v2 DPI awareness before
showing native dialogs and resets the awareness context afterward.
Use it where we call QFileDialog::getXXX.
Change-Id: Ib711a70aa94b693a2515804a729f666ea7fbd673
Reviewed-on: https://code.wireshark.org/review/27568
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
CMake 3.11 with the Ninja generator started complaining about CMP0058
related to ui/qt/CMakeFiles/qtui_autogen.dir/RCCstock_iconsInfo.cmake
amd other files (AUTORCC). While the policy could be set explicitly,
let's try to modernize the CMake configuration:
- Drop CMP0042, if this gives issues with macOS, then it must be solved
in a different way using non-deprecated methods.
- Drop CMP0054 and ensure that all if("${foo}") and if(${foo}) are
converted to if(foo).
- Remove string comparison against "-NOTFOUND", it already evaluates to
false in an if condition.
- Use CXX_STANDARD/CXX_STANDARD_REQUIRED for Qt 5.7 and newer.
- Assume that copy_if_different can accept multiple sources (CMake 3.5).
- Consistency: Out of the 60 CMake 3.11 FindXxx.cmake files that use
find_library, 34 contain "XXX_LIBRAR" while 16 contain "Xxx_LIBRAR".
Let's assume uppercase variables (now custom MaxMindDB include dirs
are correctly used).
CMake 3.5 was chosen as the next version because of its wide support.
Ubuntu 14.04 ships with cmake3 3.5.1, Debian jessie-backports has 3.6.2,
EPEL for CentOS/RHEL6 includes cmake3 3.6.1 and SLES12 SP2 has 3.5.
Change-Id: I2fa7b94bf8cc78411f414987d17bab3a33dfb360
Reviewed-on: https://code.wireshark.org/review/27444
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
g_ptr_array_free(a, FALSE) returns "a->pdata". Callers that do not
handle this will leak memory (e.g. "tshark -G plugins"). Convert other
users to use the return value instead of direct access to "a->pdata".
Change-Id: I29835477d587f5f54bf0d94cdae9f375e3da3ce3
Reviewed-on: https://code.wireshark.org/review/27437
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
QString already copies the memory, no need to strdup it. Simplify use of
GString as well (str is NUL terminated). Found by Clang Static Analyzer.
Change-Id: Ic3ba3daa9121736529e0bee2d41adc95a55a3feb
Fixes: v1.99.0-rc1-253-gdf8c4bf264 ("Capture Interfaces Dialog:")
Reviewed-on: https://code.wireshark.org/review/27344
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
add_to_profile_list (via add_profile_entry) clones the name and does not
own it, so free it afterwards. Found by Clang Static Analyzer.
Change-Id: I340c91b65d97b24a52812fd6f4b85933cfb15f89
Reviewed-on: https://code.wireshark.org/review/27343
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Fix required indicator on reset and change an assert to a simple
drop-out
Change-Id: I355980223f213fef8ee4c6ac7d6bcb0fce1a7913
Reviewed-on: https://code.wireshark.org/review/27416
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Add plural translations in capture file dialog preview.
Reworded text for "error after X records(s)" to use same format
as similar messages.
Change-Id: I7b2c8811a9c0c0f76587c5aad1a648a1b969f37a
Reviewed-on: https://code.wireshark.org/review/27412
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Ensure that frameSelected(0) is emitted when not having a proto tree
field selected because of:
1. No match when trying to restore selected field
2. Search selects a packet with no field to select
3. Current packet is deselected
This will disable functionality which requires a selected field
and updates the status bar according to selected field.
Bug: 14658
Change-Id: I158fae4f26c02f718cee0030ef9e38b597876381
Reviewed-on: https://code.wireshark.org/review/27395
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Group arguments together to better present them, as well as to
have the possibility to better facilitate settings categories.
The order of tabs is defined by the numbering of arguments and
their appearance. If no tab can be found or no group has been
defined for the argument, a default tab will be added.
Change-Id: I032881193e09d4ad5d65c9f73fede87695acdace
Reviewed-on: https://code.wireshark.org/review/27054
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Check if the reader thread is running before calling requestInterruption()
in an attempt to avoid a crash when stop capture.
Change-Id: I07cdc19eb42413ce421f05186314fc34c33041e6
Ping-Bug: 14631
Reviewed-on: https://code.wireshark.org/review/27316
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Always call toolbar->startCapture() when starting a capture even if
not having a list of interfaces. startCapture() will check for this.
Change-Id: Ifb654f403c72e1d687ae1f6471fc955aa4f6f23c
Ping-Bug: 14631
Reviewed-on: https://code.wireshark.org/review/27306
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Try to align the QComboBox with the other elements.
Change-Id: I63acdc2eb463e8806edffe27d67423dc37d161e5
Reviewed-on: https://code.wireshark.org/review/27305
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The "Autotools, Make" section in .editorconfig didn't have an associated
filepath glob pattern, which meant that it matched the preceding
pattern, which was "*". This would appear to explain why VS Code
mysteriously forced 8-character tabs for some files.
Remove ui/qt/Makefile_custom.common while we're here.
Change-Id: I5a84cc53c992bb2a95036cb98dc97cc7eb6b1299
Reviewed-on: https://code.wireshark.org/review/27281
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
conversation_hash_tables_dialog.cpp:52:67: error: type qualifiers ignored on cast result type [-Werror=ignored-qualifiers]
Change-Id: I07c815a7233af41c840087a35eaf9172c06161f3
Reviewed-on: https://code.wireshark.org/review/27268
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Let the Save dialog fixup the extension on accepting the dialog.
Otherwise it is possible that files are silently overwritten without
prompting. Additionally, if a user decides to save a pcapng file as
"foo.pcap", do not try to rename it to "foo.pcap.pcapng".
This change is limited to macOS and Linux because Windows uses a
different file dialog. Tested with both macOS and Linux.
Bug: 14600
Change-Id: Ie0bc1f579766a04f0aad96dcd5daba3fffef9764
Reviewed-on: https://code.wireshark.org/review/27188
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The default Qt behavior for extension adjustment is quite bad. When the
file type filter is changed, the extension always becomes "gz" because
"pcap.gz" happens to be the first extension in the list. It also did not
check that the last suffix is actually a valid extension (e.g.
"capture.2018.01" became "capture.2018.gz").
Improvements:
- Respect the "compression" checkbox when adjusting the filename.
- Replace the extension only if it is a known one, append otherwise.
- Use a better default extension (from "wtap_default_file_extension").
Affects only macOS and Linux since Windows has its own native dialog.
See also https://bugreports.qt.io/browse/QTBUG-67993
Bug: 14600
Change-Id: I8cd0788f2abac0c6d7e29490b1ebb381f5a926d0
Reviewed-on: https://code.wireshark.org/review/27186
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When using coloring rules the selected packet is sometime hard to recognize. The stylesheet of the packet list is extended for this.
Bug: 14621
Change-Id: Ied465e0e211b3c11e69cb71f89988eb45622dd72
Reviewed-on: https://code.wireshark.org/review/27141
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
"packet_dialog.cpp" does not use setCaptureFile, resulting in a NULL
dereference while trying to obtain the dissection context. Apply a fix
similar to v2.5.1rc0-121-g9198448f9d (pass a fixed dissection context to
ProtoTree). Additionally, fix a memleak and correct documentation.
Why not add "proto_tree_->setCaptureFile(cap_file_.capFile())" in
PacketDialog? Well, it also uses "proto_tree_->setRootNode(edt_.tree)"
which means that "cf_->edt" would be different from "edt_". If that is
the case, then "proto_construct_match_selected_string" will not return a
filter for FT_NONE fields (see the call chain in proto.c).
Bug: 14620
Change-Id: I6eeaf32b650a2095e15f64bbe64b54cdd545c7a9
Fixes: v2.5.0rc0-1608-g4d6454e180 ("Qt: Drag n Drop Filter expression from Packet Tree")
Reviewed-on: https://code.wireshark.org/review/27160
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Qt 5.11 seems to have changed the include dependencies, so adding those, that are missing
Change-Id: I2b0482f7554467d6981be65bfd3fea1a3e118976
Reviewed-on: https://code.wireshark.org/review/27145
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Opening a context menu in the expert dialog resulted in an UBSAN warning
because ExpertInfoModel::data is invoked with a proxy model index. Rely
on the proxy to perform this mapping (change filterActionTriggered to
avoid direct model access while at it).
Change-Id: Id399f44b954b87d7d4dd0341fbedb391ab1b13da
Fixes: v2.5.0rc0-1966-gb0112e60ad ("Add a model to use for Expert Info dialog.")
Reviewed-on: https://code.wireshark.org/review/27025
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
All WiresharkDialog instances have a "captureEvent(CaptureEvent)" method
that requires the definition of "CaptureEvent" from capture_file.h.
By luck, this definition is available for CMake builds due to the
generated MOC headers being included in the right order, but this cannot
be relied on. On an autotools build with less luck:
main_status_bar.moc.cpp: In static member function ‘static void MainStatusBar::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)’:
main_status_bar.moc.cpp:241:86: error: invalid use of incomplete type ‘class CaptureEvent’
case 28: _t->captureEventHandler((*reinterpret_cast< CaptureEvent(*)>(_a[1]))); break;
Create a new header file to limit exposure of the CaptureFile class.
Change-Id: I4ab609f13b9438797e39e7b98f367da35536979b
Fixes: v2.9.0rc0-186-g57bf7e4347 ("Qt: Fix memory leak for CaptureEvent")
Reviewed-on: https://code.wireshark.org/review/27003
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make the argument to the events a non-memory object
Change-Id: I46d8c24415aa2bc48b2a2d3b1fccffa6956d08b5
Reviewed-on: https://code.wireshark.org/review/26671
Reviewed-by: Roland Knall <rknall@gmail.com>
Switch to a single Doyxgen configuration which was generated using a
recent version of Doxygen and customized to suit our needs. Add
wsar_html and wsar_html_zip targets to CMake. Update some Doxygen markup
and documentation as needed.
Change-Id: Ic8a424b292c35a26f74ae0b53322265683e56e69
Reviewed-on: https://code.wireshark.org/review/26976
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename packet_list_enable_color() to packet_list_recolor_packets()
to reflect what it does.
Remove the call from where it's not needed.
Change-Id: I55dd1a9af8f5b1dbd83b06136a5bbcfddea06cdb
Reviewed-on: https://code.wireshark.org/review/26959
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The About dialog should not show MaxMind DB path when built without
the MaxMind DB resolver.
Change-Id: Id5b51628a04005fc4dcaacea26abb3a0ddee9b66
Reviewed-on: https://code.wireshark.org/review/26886
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add a splitter to the capture file properties dialog. This allows for
modifying the relative sizes of the details vs comment boxes. People who
paste lots of text into the capture file comment may want a lager box
for it.
Change-Id: Id79d9f5fd7e589a2ba88aa5f16b52bb37d7c47ae
Reviewed-on: https://code.wireshark.org/review/26845
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Set the childrenCollapsible property to false in the main window
splitters. Set the minimum size for the packet list, proto tree, and
byte views to a small (one em), consistent, and nonzero value. Otherwise
it's easy to inadvertently end up with a hidden main window view.
Bug: 14478
Change-Id: I07a352cf2cf0375829ae2e0cb53b2a7d717dbb7d
Reviewed-on: https://code.wireshark.org/review/26847
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Before it was like this (display filter line edit "lost" focus)
After press Enter in completion pupup, line edit stop show cursor.
I was confused every time because without cursor it look like focus lost.
But in fact focus is not lost and only cursor was disappear.
Now cursor is not disappear
Change-Id: I56979a1a774b6fb0b8b8be8239c01f5034c42fc8
Reviewed-on: https://code.wireshark.org/review/26781
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Without this fix, Wireshark crashes when the user presses Ctrl-D or
selects Edit / Ignore Packet and the current focus is somewhere on the
bytes view.
To ignore a packet, we protect the actual ignore operation by calling
main window's freeze and thaw methods. We save a pointer freeze_focus_,
pointing to the widget that has the focus, and restore the focus during
thaw.
This causes a crash if the focused widget is part of ByteViewTab.
Ignoring the packet causes a redissection, the ByteViewTab and its
children are cleared. freeze_focus_ remains non-NULL but doesn't point
to a valid QWdiget any more. Calling freeze_focus_->setFocus() crashes.
Fix this by using a QPointer<QWdiget> for freeze_focus_. The pointer is
then reset to NULL when the QWdiget that it points to goes out of scope.
Change-Id: Icc1f71a9de971284c628b7815a7fc1a5cc0d5fe2
Reviewed-on: https://code.wireshark.org/review/26693
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Roland Knall <rknall@gmail.com>
Copy all printable characters (like in GTK-based) but not only letters
Change-Id: I5e431d0c52d65c5867f4893c86b6f0eb3f535972
Reviewed-on: https://code.wireshark.org/review/26757
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This stops the main source from being buildable by Qt 4.x
Change-Id: I61edbae04ac2b3bf0ae8ee8e09d335083945c176
Reviewed-on: https://code.wireshark.org/review/26756
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Allow certaing elements to be reloaded upon request. The way
this works is, certain elements can be configured to be reloadable.
By doing so, the extcap is asked once more just for the values
list of this item, together with all already set options, and
reloads the available options depending on the response.
Only supported for selector. Radio and Multiselect will need
additional patches, also moving those parts outside of extcap_argument.cpp
might make sense before hand.
Change-Id: I2e9e3d109b334bf878835a7cc9354f468bc22dee
Reviewed-on: https://code.wireshark.org/review/26223
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
This patch adds support for sequencing HTTP Redirects. This enables
tracking of HTTP-based redirects, which may not have a Referer header.
As such, this patch also renames 'HTTP Referer statistics' to
'HTTP Request Sequences' to better reflect the more generic
functionality.
Note that this does not fully support RFC 3986. An external library like
uriparser.github.io may be a better option for efficient, full relative
HTTP URL resolution.
A Sample PCAP to test functionality is available here:
https://wiki.wireshark.org/SampleCaptures?action=AttachFile&do=get&target=http_redirects.pcapng
A sample PCAP to demonstrate usefulness is available here:
https://www.malware-traffic-analysis.net/2015/08/31/page2.html
(examine request to hxxp://lk2gaflsgh.jgy658snfyfnvh.com/service.php)
Change-Id: I9edd1a1de86228b0dcb1df9f6f30e24379684321
Reviewed-on: https://code.wireshark.org/review/26679
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Additionally, add an attribute to the tap function to prevent future
callers from leaking this memory.
Change-Id: Ief6af2bbc74d19153628f09d7b273e85cb2284ab
Reviewed-on: https://code.wireshark.org/review/26642
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add duplicate ACK ticks to Statistics → TCP Stream Graphs → Time
Sequence (tcptrace), which I missed when porting from GTK+. Add zero
window crosses while we're here.
Switch TCPStreamDialog to a subclass of GeometryStateDialog.
Add a slot and URL for the Help button and a stub entry in the User's
Guide.
Bug: 12009
Change-Id: Idf2ddb9eb33d924d65998285b5cffc234156497c
Reviewed-on: https://code.wireshark.org/review/26592
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In macOS dialogs, there's a default button, which is the button that
Enter/Return activates, and that Enter/Return *always* activates,
*regardless* of what button has the input focus. To activate the button
that has the input focus, you use the space bar.
To implement that, we need to disable auto-default on all buttons,
including the Cancel button.
Put in a comment explaining all this.
We may want to do this in all alert boxes, and possibly all dialogs with
buttons.
Change-Id: I214dd2870a9720ea705d8db39adc5b6af2003fb1
Reviewed-on: https://code.wireshark.org/review/26629
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Always display Lua messages (to match tshark), do not send them to
qDebug as they will not be visible with the default log options.
Change-Id: I660a3877355891d45881b26735596ea6dc8a8b29
Fixes: v2.5.0rc0-2037-gc9b6887d84 ("wslua: Fix logger after g6a5e90f2")
Reviewed-on: https://code.wireshark.org/review/26599
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Invoke the tap draw callback immediately after reloading a capture (or
changing a display filter) rather than waiting for a timer to expire.
Change-Id: I3d1549d1a18c8e173cd29d45f31ce7586e0d70fe
Reviewed-on: https://code.wireshark.org/review/26600
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
If no stream is given to FollowStreamDialog::follow(), then it
overwrites the display filter with a conversation filter for the first
packet in the capture file.
Pass an explicit stream number and the "Follow stream" button will set a
correct display filter.
Test: open pcap with three TCP streams. Statistics -> Conversations.
Select last TCP conversation (expect "tcp.stream eq 2"). Select the
second conversation (expect "tcp.stream eq 1") and activate "Filter Out"
button (expect "!(tcp.stream eq 1)" and not "!(tcp.stream eq 2) and
!(tcp.stream eq 1)").
Bug: 14254
Change-Id: I28744d7f76f5034b07ea5660b45399566e3a7d2c
Reviewed-on: https://code.wireshark.org/review/26520
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Currently the "Continue without Saving" button is visually highlighted
in the "Unsaved packets..." dialog, but pressing Enter triggers "Save"
instead. Even after changing button focus with arrow or tab keys,
pressing Enter will not confirm the action (but Spacebar does).
Restore the expected behavior for Linux and Windows, but preserve the
fix for macOS since (for which this was originally added).
Bug: 14531
Change-Id: Ic20fc5809b55949f6fd960bcb32618a4fa7fd1e9
Fixes: v2.3.0rc0-2672-gb0335359e5 ("Qt: Give discard button focus (but not as default)")
Reviewed-on: https://code.wireshark.org/review/26511
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Ensure that a selected field (via selectedFieldChanged) becomes visible
in the packet details view when selected from the bytes view (or when
found via a search).
As making a field always visible seems a desirable feature (and in the
interest of simplifying preferences), enable this by default using the
smarter EnsureVisible hint.
Remove the associated preferences and mark them GTK+ only.
Change-Id: I05a918c1e09135c0b4e10f04024bff092756e55c
Fixes: v2.5.0rc0-2383-g6b2764a41e ("ProtoTree behavior fixes.")
Reviewed-on: https://code.wireshark.org/review/26509
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add col_data_changed, which checks to see if we have updated column
info. Add col_append_frame_number, which adds a frame number and sets
col_data_changed. Call col_append_frame_number instead of
col_append_fstr from some dissectors.
Add PacketListRecord::invalidateAllRecords, which invalidates any cached
record data. Add PacketListModel::invalidateAllColumnStrings which calls
invalidateAllRecords and signals that our data has changed. Call
invalidateAllColumnStrings when we have new name resolution or column
information.
Bug: 11414
Bug: 11468
Change-Id: I2671594a722f4f9436fe1df84d43489a148e0cee
Reviewed-on: https://code.wireshark.org/review/26373
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
This removes a check that confuses clang and generates a false poritive.
Change-Id: Ib28b88b40e16ad300ba6d3df8334bd752a4fa7f1
Reviewed-on: https://code.wireshark.org/review/26171
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
QAbstractItemView assumes that editors are widgets, not windows.
QAbstractItemView::edit calls QAbstractItemViewPrivate::openEditor,
which simply calls show() and setFocus() on the editor widget. If that
widget happens to be a native dialog, its event loop might not be
processed. This is the case on macOS at least.
Create widgets derived from QLineEdit that edit the value directly along
with a button that can open the associated modal dialog. Install event
filters so that we keep the correct tab behavior between fields of the
UAT.
Bug: 13958
Ping-Bug: 14031
Bug: 7761
Change-Id: Ie5f0a5cbde33bb9add8217029c2063a0bbfd804a
Reviewed-on: https://code.wireshark.org/review/23015
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Only install mmdbresolve if MAXMINDDB_FOUND is true.
Fixup the Qt about box and WiX GTK defines while we're here.
Change-Id: I7ac3c21ddb4aebc1dae1c3d8cfd2bcafc4139d2e
Reviewed-on: https://code.wireshark.org/review/26299
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
MaxMind is discontinuing its legacy databases in April in favor of
GeoIP2, which use a newer database format (MaxMind DB). The reference C
library (libmaxminddb) is available under the Apache 2.0 license which
isn't quite compatible with ours.
Add mmdbresolve, a utility that reads IPv4 and IPv6 addresses on stdin
and prints resolved information on stdout. Place it under a liberal
license (MIT) so that we can keep libmaxminddb at arm's length. Add
epan/maxmind_db.[ch], which spawns mmdbresolve and communicates with it
via stdio.
Migrate the preferences and documentation to MaxMindDB.
Change the IPv4 and IPv6 asnum fields to FT_UINT32s. Change the
geographic coordinate fields to FT_DOUBLEs.
Bug: 10658
Change-Id: I24aeed637bea1b41d173270bda413af230f4425f
Reviewed-on: https://code.wireshark.org/review/26214
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
View / Coloring Rules...
shows this warning
12:02:26.401 Main Warn QObject::connect: No such signal ColoringRulesModel::dragDropComplete() in ../ui/qt/coloring_rules_dialog.cpp:61
12:02:26.401 Main Warn QObject::connect: (receiver name: 'ColoringRulesDialog')
Remove the unused signal.
Change-Id: Id42c249ac9252269eb31e4971e62e927a28c88ed
Reviewed-on: https://code.wireshark.org/review/26239
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Remove the endpoint map and its button from the Qt and GTK+ UIs. It
depends on GeoIP Legacy for coordinate information and those databases
are being deprecated in favor of MaxMind DB. We *could* upgrade the code
to use mmdbresolve, but according to
https://dev.maxmind.com/geoip/geoip2/geolite2/ they're also going to
remove coordinate information from GeoLite2:
"In addition, in 2019, latitude and longitude coordinates in the
GeoLite2 databases will be removed.* Latitude and longitude coordinates
will continue to be provided in GeoIP2 databases. Please check back for
updates."
Change-Id: I43e1593d282a0f1aae897b1f4724117d1496b21e
Reviewed-on: https://code.wireshark.org/review/26229
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Otherwise dialogs could be opened multiple times
Change-Id: I19f9c11395b5f5ba41c00ff78ab9794064562d29
Reviewed-on: https://code.wireshark.org/review/26221
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Remove all the existing LoadDLL\GetProcAddress combinations
that allowed conditional Win32 API usage if supported on the
running OS version.
All the required functions are present in the versions we support.
Change-Id: Ibc43e51cefcd1c7562d4e251784362509f224ed6
Reviewed-on: https://code.wireshark.org/review/26215
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Add an exit_application() routine that calls wsApp->quit() + exit() in
the Qt UI and exit() in the GTK+ UI. Make sure we call it instead of
exit() when needed.
Bug: 14395
Change-Id: I171b5fd19ce4664db4a2ebb4b8c33e278dcec427
Reviewed-on: https://code.wireshark.org/review/26121
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make "Prepare a Filter" from the Source and Destination columns work for
USB source and destination address, this value must be quoted as well.
Change-Id: Ib7a772050c204e716781cc27f9eddbdb7971e547
Reviewed-on: https://code.wireshark.org/review/26096
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The usb.product dissector table displays vendor+product values as
hexadecimal, ensure that these are not parsed as zero.
While at it, clarify the meaning of the model contents. Ideally the
model should store numeric selectors as integers rather than strings,
but that requires more work.
Change-Id: I3bb17ad0d0a03c8813ded4ea6890dbc2aedd738d
Reviewed-on: https://code.wireshark.org/review/26087
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Gerald Combs