When copying from another profile which has been renamed:
show the new profile name in the info label "Created from".
When copying from another profile which is later deleted:
append "(deleted)" to the info label to indicate that the origin
profile is not in the list.
Do not show "Renamed from" when a profile name if renamed back to
it's original name.
Change-Id: I0bf0c868c5dfd150a23b2ef887e7c70030b48d05
Reviewed-on: https://code.wireshark.org/review/32201
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add ColorUtils::themeIsDark and use it to report our dark / light mode
in the "About" dialog. Summarize the HiDPI capability of our displays as
well.
Change-Id: I242af1eb48017d49b90e71099bb753e67a8dd32b
Reviewed-on: https://code.wireshark.org/review/32115
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reapply the column width and alignment when editing the fields
in a custom column.
Bug: 14177
Change-Id: I581ea67505f9181c1e5133c9950f59ed0780b0ba
Reviewed-on: https://code.wireshark.org/review/32121
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Set capture_opts->restart before restart current capture.
Update the restart handling in capture_input_closed() to not remove
the current save file; this is either the last file in a ring buffer
or a temporary file which will be reused later. Also remove the code
which starts the capture again because this is now done in
MainWindow::on_actionCaptureRestart_triggered().
Keep the code to restore the original save file when having a ring
buffer. This will avoid the error message "Ring buffer requested,
but capture isn't being saved to a permanent file" and a following
unwanted capture stop.
This fix will also avoid the "No packets captured" warning when
restart capture without having any packets captured.
Remove the unused capture_restart() function which was used in GTK.
Change-Id: I80802217b71810eaa36b78a2eb4c32697ddc92ce
Reviewed-on: https://code.wireshark.org/review/32110
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make it possible to remove the "Capture to a permanent file" setting
in Capture Interfaces Output dialog by turning off saving_to_file in
updateInterfaces().
Also make sure to free the old values for save_file and orig_save_file
to avoid memory leaks.
Set orig_save_file to the same as save_file from the '-w' option to
fill in the current "Capture to a permanent file" value correctly.
Change-Id: I1f4df8cfa279f934eff028f32838b9734b627af1
Reviewed-on: https://code.wireshark.org/review/32111
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This feature was removed in v2.5.1rc0-427-gf529ab5d0a, anticipating that
MaxMind would remove support for it in 2019. They have however changed
their mind and maintained latitude and longitude information.
They recommend displaying an accuracy radius, but the reported values
are 50, 100, 200 and 1000km. When implemented literally, a marker in
Ireland would cover the whole island plus mainland, so I have instead
opted to use a fixed radius of 1km at deeper zoom levels.
The old ipmap.html file was outdated and had broken tiles, I rewrote a
new one from scratch using the light-weight Leaflet library combined
with tiles from OpenStreetMap. This is more mobile-friendly and secure
(https, SRI). To improve handling of nearby or overlapping nodes,
clustering is used (individual nodes can still be inspected).
Browser compatibility results: IE8 is unusable, IE9 partially works
(tooltips sometimes disappear and the cluster radius control is gone),
IE11 works. Of course Firefox 65 and Chromium 72 have no issues.
The map popup description in the generated GeoJSON structure is now
split in several properties, allowing presentation to be handled by the
HTML page instead of the C code.
Bug: 14693
Change-Id: If2ec9c518f7723ac0ab27b6272463356875a0ff2
Reviewed-on: https://code.wireshark.org/review/31952
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Avoid crashed in context menu in Bluetooth windows when there is no any items.
Also add missing last column in "Copy All" in HCI Summary (fix console warning).
Change-Id: I28af0208c3b1c813d43305f3c0a4bf19f66d3e31
Reviewed-on: https://code.wireshark.org/review/31977
Petri-Dish: Michal Labedzki <michal.labedzki@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Both functions accept an address in network byte order, but
maxmind_db_lookup_ipv4 does not accept a pointer. Add an indirection and
remove unnecessary memcpy calls. This removes some confusion for me.
Change-Id: I291c54c8c55bc8048ca011b84918c8a5d3ed1398
Reviewed-on: https://code.wireshark.org/review/31951
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fixing some "implicit conversion loses integer precision" warnings
reported by clang with -Wshorten-64-to-32 option
Change-Id: Icd641d5f4fd8ff129f03f1b9e1da0fc86329f096
Reviewed-on: https://code.wireshark.org/review/31901
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The RSA Keys API and GUI are only functional when GnuTLS support is
available. Be sure to hide the functions in the header and hide the
preferences panel when GnuTLS support is missing.
Change-Id: I0a52ab142c4d45b8186780ea9b1645542dcc6305
Fixes: v2.9.1rc0-585-gec8f506c4b ("Qt: add initial RSA Keys preference frame")
Reviewed-on: https://code.wireshark.org/review/31837
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
In some cases the column width and/or hidden setting is not correctly applied
when switching between profiles having different hidden settings.
Unhiding the column before applying width and hidden setting fixes this issue.
Bug: 15466
Change-Id: I09e3451612ba6dd0510b19f7f4d84d281b0188b5
Reviewed-on: https://code.wireshark.org/review/31812
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Update release notes now that this GUI is mostly functional.
Change-Id: I118fbbe879e366643084f0e7ac3e437a29f21d5f
Reviewed-on: https://code.wireshark.org/review/31797
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Load the list of key URIs, strip known keys, ask for a PIN, add valid
results to the list. Apply this list on pressing OK in the preferences
dialog or revert the changes on pressing Cancel.
Change-Id: Id48cd9b876b4d272eb6dbdadf8a0859190cc0ce8
Reviewed-on: https://code.wireshark.org/review/31796
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The RSA Keys frame is intended to configure RSA keys (both key files and
PKCS #11 tokens). Add a new "RSA Keys" item to the preferences menu.
Implement addition and removal of PKCS #11 libraries and add an initial
version that displays configured RSA keys.
The "Add new token…" button will be implemented later.
Change-Id: Ie5b9eb403afc7bebeb7be8bd53d4d4b30842204c
Reviewed-on: https://code.wireshark.org/review/31795
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
UatModel could be constructed with a name instead of an epan_uat type.
To allow those users to save/revert the uat, make sure to expose a
method that does not require access to the underlying epan_uat type.
Change-Id: I1d1a5811c1025bd9c2a2ea1722f460e6ac33b9aa
Reviewed-on: https://code.wireshark.org/review/31793
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Set the push button as parent to the save menu so it will be deleted
when that parent is destroyed.
Change-Id: Ic396dcf25092c90cd305a010be3d551d8ad8397c
Reviewed-on: https://code.wireshark.org/review/31802
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
cf_get_packet_comment already has one code path that returns duplicated
memory. Be sure to document the requirement to free this memory and
adjust Qt to avoid memory leaks.
Be firm and assume that wth.opt_comment is owned by wth, so duplicate it
before returning it from cf_get_packet_comment.
Change-Id: I91f406296c9db5ea21b90fc2e108c37de4528527
Ping-Bug: 7515
Reviewed-on: https://code.wireshark.org/review/31712
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Vasil Velichkov <vvvelichkov@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Manually checked all callers of wtap_seek_read to ensure that
wtap_rec_cleanup is called. Added missing wtap_rec_cleanup to:
- Completion of sequential read: wtap_sequential_close
- Callers of wtap_seek_read:
- users of cf_read_record_r:
- PacketListRecord::dissect
This fixes one of the two ASAN memleak reports while running
test_tshark_z_expert_comment and test_text2pcap_sip_pcapng (the other is
about opt_comment which is still unfixed).
Vasil Velichkov also found this issue and came up with a similar fix.
Change-Id: I54a6aa70bfdb42a816d03ad4861d0ad821d0ef88
Reviewed-on: https://code.wireshark.org/review/31709
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Include the current word in the filter completion list to give the
user a more complete picture of what constitutes a valid single-token
protocol name.
Bug: 15431
Change-Id: I77cfc78f19623d9aefd4441a67ed3ae72068034e
Reviewed-on: https://code.wireshark.org/review/31654
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This is more explicit and easier to read with slightly better locality
while using less code.
Also less awkward when the package doesn't fit the narrow package list
expectations.
The ws_find_package() macro doesn't include all the status messages. The
choice was to rely on standard find_package() and feature_summary() output
and be less verbose.
Avoid polluting the CLI build interface. Per target include paths and
macro definitions are preferred.
Because this patch intentionally removes the global CMAKE_*_FLAGS
and include_directories() usage in favor of target properties, some
untested build configurations may inadvertently break because of
missing ${PACKAGE}_INCLUDE_DIRS or ${PACKAGE}_DEFINITIONS. This
required a manual review of dependencies that might have been
incomplete.
${PACKAGE_VAR}_LINK_FLAGS seems to be unused.
Changing the CMake Qt code to use more modern CMake component syntax
is left as future work.
Change-Id: I3ed75252189a6e05a23ed6e619088f519cd7ed78
Reviewed-on: https://code.wireshark.org/review/31496
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Resources such as translations (autogenerated qm files) and SVG images
resulted in non-reproducible builds. Be sure to disable this to make the
resources reproducible on Qt < 5.8 or Qt >= 5.9 (excluding Qt 5.8.x).
With this change, the Wireshark build is reproducible invariant of the
build directory (but not the source directory).
Bug: 15163
Change-Id: I9240d2aa6e7298e1928c0f1d97ce83673320024d
Reviewed-on: https://code.wireshark.org/review/31593
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The correct method of selection of colors is just using the
QColorDialog not a specialized object. Implementing it just
that way, to correct bug on Linux
Bug: 15399
Change-Id: I3c4785d352888ec34c34534667c3f7df182f9fd7
Reviewed-on: https://code.wireshark.org/review/31465
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Save 800ms and avoids a synchronization point (improves build
parallelism) by directly adding object files to the wireshark binary.
Change-Id: I7d1484c65a26f3f6874474b61d38ba474aba8347
Reviewed-on: https://code.wireshark.org/review/31512
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
What we were calling the "name" is actually a description to show to
users; what were calling the "short name" is just the name to use on the
command line.
Rename some routines and structure members, and put the name first and
description second in the table.
Expand some descriptions to give more details (e.g., to be more than
just a capitalized version of the name).
Fix the CamelCase capitalization of InfiniBand.
Change-Id: I060b8bd86573880efd0fab044401b449469563eb
Reviewed-on: https://code.wireshark.org/review/31472
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Set the push button as parent to the profile list menu so it will
be deleted when that parent is destroyed.
Change-Id: Ide4a234e039a3e27d9ee4732a3800906c80be173
Reviewed-on: https://code.wireshark.org/review/31446
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Only copy ASCII characters when doing "Copy Bytes as Hex + ASCII Dump"
from the ByteView. This is what we do in all other Hex Dumps.
Also change the parameter name to reflect this.
Change-Id: I63cc79ffa014fd9aa50c84d765ee168f0b1ea44a
Reviewed-on: https://code.wireshark.org/review/31442
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Draw a circle+backslash or a warning triangle in the far right of the
line edit entry for invalid and deprecated filters respectively. This
should provide an additional clue for color blind users.
Bug: 15326
Change-Id: I55a1e214834a340ccda3bfe8880bba12c5e274e9
Reviewed-on: https://code.wireshark.org/review/30936
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename the Remove action in the welcome page to "Remove from list" to
indicate that the file is only removed from the list, not from disk.
Change-Id: I4a47c9852203596cc601bf254a4bcfc700ccd025
Reviewed-on: https://code.wireshark.org/review/31433
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add a menu item for "Show in Finder/Folder" for plugins in cases where
Wireshark loads plugins from other folders than is listed in "Folders".
Change-Id: I8cc42d9992d885f1ca37f5769d7292bed1584f4b
Reviewed-on: https://code.wireshark.org/review/31270
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
We've already reported the files that couldn't be saved; no need to tell
the user something they already know by that point.
Change-Id: I8251a46134342df6b40a6324aa76a5237fde7c93
Reviewed-on: https://code.wireshark.org/review/31298
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
If a particular save failed, always let the user know.
Change-Id: I618e0ff82813cd4249ab7b1714f9a50e095a1ea8
Reviewed-on: https://code.wireshark.org/review/31296
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Limiting the maximum *path* name length is bogus; if the user wants to
store the file in some directory deep under the root (UN*X) or the root
of the drive (Windows), that's their choice - don't prevent them from
saving in a directory with a path longer than some maximum or limit the
file name based on the length of the path leading up to it.
Limiting the maximum *file* name is presumably to cope with, for
example, HTTP objects with a URL that had a very long query component,
so it makes sense.
Change-Id: Idfc7de8124ee80bdd4950341ff2239834eb9f6f6
Reviewed-on: https://code.wireshark.org/review/31295
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows taps that can fail to report an error and fail; a failed
tap's packet routine won't be called again, so they don't have to keep
track of whether they've failed themselves.
We make the return value from the packet routine an enum.
Don't have a separate type for the per-packet routine for "follow" taps;
they're expected to act like tap packet routines, so just use the type
for tap packet routines.
One tap packet routine returned -1; that's not a valid return value, and
wasn't one before this change (the return value was a boolean), so
presume the intent was "don't redraw".
Another tap routine's early return, without doing any work, returned
TRUE; this is presumably an error (no work done, no need to redraw), so
presumably it should be "don't redraw".
Clean up some white space while we're at it.
Change-Id: Ia7d2b717b2cace4b13c2b886e699aa4d79cc82c8
Reviewed-on: https://code.wireshark.org/review/31283
Reviewed-by: Guy Harris <guy@alum.mit.edu>
cmdarg_err() is for reporting errors for command-line programs and
command-line errors in GUI programs; it's not something for any of the
Wireshark libraries to use.
The various routines for parsing numerical command-line arguments are
not for general use, they're just for use when parsing arguments.
Change-Id: I100bd4a55ab8ee4497f41d9651b0c5670e6c1e7f
Reviewed-on: https://code.wireshark.org/review/31281
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Class TrafficTableTreeWidget is used by the conversation and enpoint
dialogs, both of which are subclasses of WiresharkDialog.
Those dialogs use WiresharkDialog::registerTapListener() to register tap
listeners. When the dialog is closed, those listeners are removed by
WiresharkDialog::removeTapListeners().
TrafficTableTreeWidget's destructor tries to remove its tap listener a
2nd time after WiresharkDialog did its cleanup. This causes warnings
Warn remove_tap_listener(): no listener found with that tap data
Don't call remove_tap_listener() from TrafficTableTreeWidget's
destructor. The destructor is now empty and can be removed completely.
Change-Id: I3143fa1c5116203f4a0be791bd4c5f08135aefb0
Reviewed-on: https://code.wireshark.org/review/31259
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Stig Bjørlykke