Note that when the iterator was used for the items within
the tree (in TapParameterDialog::getTreeAsString()), the
last 2 items/headers were not being seen. Don't know why,
but when instead iterate by index, all column headers
are visible.
Change-Id: Ib5f38d1af0ecbefd400041584ba1d59d235dcbd1
Reviewed-on: https://code.wireshark.org/review/24969
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The signals related to capture events were refactored recently. Adjust
the follow stream dialogue to use the new CaptureEvent signal instead of
the now removed signal CaptureFileClosing.
Filter for context==file, event==closing in the signal handler.
Change-Id: I2d75b424fbf0a6734b0290aa205dd3d0c1ce053f
Reviewed-on: https://code.wireshark.org/review/24980
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Existence of in_file has been checked in line 908.
Change-Id: Ida6c06362a1f88caec40701be7f3e42133ce404a
Reviewed-on: https://code.wireshark.org/review/24994
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add interface to expand the QUIC cleartext secrets
(quic_derive_cleartext_secrets),
an interface to create the cleartext ciphers
(quic_create_cleartext_decoders),
an interface to decrypt messages using this cipher
(quic_decrypt_message).
Change-Id: Id546150be2964959388b7ef69984b891521e5caa
Reviewed-on: https://code.wireshark.org/review/24435
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Shouldn't have led to problems so far, assuming sane overflow behavior
and sizeof (int) == sizeof (guint32), but better safe than sorry.
Change-Id: I1e154b311b9f0e3113bc9c7b4d8456ede16804ef
Reviewed-on: https://code.wireshark.org/review/24930
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Adding support for URNTI mapping when UE is moving from PCH/FACH to DCH
Change-Id: Iad67d7a88aac619171886cf35285e03d848146ae
Reviewed-on: https://code.wireshark.org/review/24963
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Ia396355d706f08772a597ecc45746d8d4bb0b0c1
Reviewed-on: https://code.wireshark.org/review/24952
Reviewed-by: Anton Glukhov <anton.a.glukhov@gmail.com>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I8341a6106cd38118f0bf1bdb87aa87cc90e89eee
Reviewed-on: https://code.wireshark.org/review/24966
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I5364e3deed22f98b77e2a6390e4cce6de3a9c7bd
Reviewed-on: https://code.wireshark.org/review/24918
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Warn that it is subject to change, although there is an experimental
Linux patch using it, so it's probably *unlikely* to change.
Update another comment while we're at it.
Change-Id: I4d5eb1461a83b990b75312ebab9471c2fe4749af
Reviewed-on: https://code.wireshark.org/review/24985
Reviewed-by: Guy Harris <guy@alum.mit.edu>
CentOS 6 ships with glib 2.28.8 which do not support
g_ptr_array_new_full (make-taps/make-dissectors) and need to link with
wsutil for glib-compat.
g_thread_new was only introduced with GLib 2.32 (not 2.31), so adjust
the check accordingly. Abort in case thread creation fails (as
documented). Properly initialize threads or it will abort on runtime
(this also requires linking epan with gthreads in CMake, autotools
already includes it with GLIB_LIBS).
Change-Id: Ie81d6df7b3b26aaa4eb25e23719a220755e2c13c
Reviewed-on: https://code.wireshark.org/review/24978
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Some compilers are more picky than others and I eliminated the use of a
value_string array that I should not have in reorganizing the Extended
Capabilities info.
Change-Id: I1dcb09bf9f8df69445ebde8b88897482ddd1fa82
Reviewed-on: https://code.wireshark.org/review/24984
Petri-Dish: Richard Sharpe <realrichardsharpe@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
"dissectors.c.in" is an input file for "make-dissectors" which outputs
"dissectors.c", but does not contain C code. Rename it to
"dissectors.in.txt" instead.
When a dissector is removed from the list, the dissectors.c file was not
properly generated even if CMake was re-run. Fix this by adding an
additional dependency on the input file. autotools likely suffers from
the same problem with removed files, I have not tried to fix that.
Restore's João's original approach using file(GENERATE) to avoid using
configure_file, this requires CMake 2.8.12.
Change-Id: Id07cd8ef502186a90d41b3bb77ed0d9c94845af9
Fixes: v2.5.0rc0-1763-gfe0c2b0485 ("Rewrite make-dissector-reg.py in C")
Reviewed-on: https://code.wireshark.org/review/24659
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
packet-ieee80211.c:2326:27: error: ‘vht_max_mpdu_in_amsdu’ defined but not used [-Werror=unused-const-variable=]
static const value_string vht_max_mpdu_in_amsdu[] = {
Change-Id: If4cc416b7fe92dc7915e26d2d89abaa17b081c09
Reviewed-on: https://code.wireshark.org/review/24977
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
with some old (and buggy) compiler (gcc 4.8.5)
Change-Id: Ie5e4f71d3f4a12f786f2c8b139bba7a0688a8d29
Reviewed-on: https://code.wireshark.org/review/24973
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
SCSI requires parameter data to be passed into the tap. Provide
a new dialog that can handle SCSI commands.
Bug: 14144
Change-Id: I4561f251ec38753a28befee33b8b994b04b92230
Reviewed-on: https://code.wireshark.org/review/24955
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This change handles both 8-byte and 9-byte extended capabilities fields
by handling them as an 8-bit field if there are only 8 bytes, but handling
them as a 16-bit field if there are 9 bytes. This is because one field
straddles the bytes, but I have seen captures where only 8 bytes are
present.
Change-Id: I624fe34dd9c8ba7f25a451a172048897d867fcb5
Reviewed-on: https://code.wireshark.org/review/24971
Petri-Dish: Richard Sharpe <realrichardsharpe@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Now that HE Information is starting to be used in radiotap headers we need to
start defining and showing these. More will be comming, especially the dissection
of the header itself and carrying info in the ieee_802_11_phdr structure.
Change-Id: I94c2184e83243656764147029295ad4ce4254416
Reviewed-on: https://code.wireshark.org/review/24945
Petri-Dish: Richard Sharpe <realrichardsharpe@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The offset must be advanced or else dissection of the following
extensions will result in a malformed packet exception.
Bug: 14292
Change-Id: I8b5cb2f377c8d3e01677b76f5bb6c3126dea64f9
Reviewed-on: https://code.wireshark.org/review/24970
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Ask, in a comment, why we're doing PeekNamedPipe() when we're trying
to read everyting in the pipe, up to the EOF, into a string.
On UN*X, do the same "read up to an EOF and then NUL-terminate the
result" stuff that we did on Windows; nothing guarantees that, on all
UN*Xes, in all circumstances, until the end of time, world without end,
amen, we can do one read and get the entire string.
Change-Id: I578802b23fec1051139eaefd9a09fe2a6de06a11
Reviewed-on: https://code.wireshark.org/review/24959
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also use double rather than float for bandwidth
calculations.
There is an issue where TapParameterDialog is not showing
the last 2 column headings - most likely because
2 of the column headings are not used by UE entries
(only channel entries). Will investigate after this.
Change-Id: I3f691990b723434176060916153786665034b8d1
Reviewed-on: https://code.wireshark.org/review/24960
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
and update FT_CONNECTION_CLOSE
Change-Id: I2758fb5b2b036d01c4fce3ef90bcafa0b000ee7d
Reviewed-on: https://code.wireshark.org/review/24431
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This is in preparation to make it easier for other classes
to get the right signals from the capture file. Also the decision
on what signals to listen to now resides with the final classes,
not main window, and it no longer needs to be changed if the
statusbar or wsapp needs additional signals.
Change-Id: If366d42b07dc822636404ac44ba2306ec4418b4e
Reviewed-on: https://code.wireshark.org/review/24941
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Add dissection of the TDS_BUF_LOGIN (aka TDS4/TDS5 login) packet.
Add some support routines to remember the endian nature of each connection.
Dissecting the TDS5 login requires dissecting the TDS_CAPABILITY token as well.
Change-Id: Id92dedeaf4b5d192bab7ec99775e371f229db3e3
Reviewed-on: https://code.wireshark.org/review/24831
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This commit fixes the order of register 0x0012 in ecat_esc_registers array
after the changes in 24949
Change-Id: If63921a5e3eb845e470b608161946f0477ff6e21
Reviewed-on: https://code.wireshark.org/review/24953
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I960c1e1860bf4ec80260a105b7a5abbf5d8db386
Reviewed-on: https://code.wireshark.org/review/24958
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
There were a few use-after-free situations. Fix one by using epan API
to get program name for tap structure.
tap structure shouldn't be deleted because it's needed. Will be freed
by the tap reset/free function.
Change-Id: Ia18d84340362839926036c777106ca1c6d1b18f5
Ping-Bug: 14141
Reviewed-on: https://code.wireshark.org/review/24950
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
This commit fixes the following
-- changes the order of registers in ecat_esc_register array
because they cannot be reached by the dissect_esc_register function.
-- typos in registers' information
Change-Id: Ia73823412abba26377f57fa59ad637879b5b9da1
Reviewed-on: https://code.wireshark.org/review/24949
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
The ArtTrigger packet is used to send trigger macros to the network. The
most common implementation involves a single controller broadcasting to
all other devices.
Please see page 41 of the referenced PDF for the packet definition of
the ArtTrigger OpCode.
https://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf
Change-Id: Iec2e749732e5462cf04b9c6942df7379e4247255
Reviewed-on: https://code.wireshark.org/review/24936
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Even if a code review suggests that they are not required, it silence 2
compiler warnings.
Change-Id: I9ea45dd6759275dd8a2b8fc48fc41d0a9cecbcc2
Reviewed-on: https://code.wireshark.org/review/24942
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Martin Mathieson