2018-04-15 09:44:18 +00:00
#!/bin/bash
2017-04-05 17:50:53 +00:00
# Setup development environment on macOS (tested with 10.6.8 and Xcode
# 3.2.6 and with 10.12.4 and Xcode 8.3).
2011-07-15 21:48:02 +00:00
#
2013-09-14 13:11:38 +00:00
# Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file)
2011-07-15 21:48:02 +00:00
#
2013-09-14 13:11:38 +00:00
# Wireshark - Network traffic analyzer
# By Gerald Combs <gerald@wireshark.org>
# Copyright 1998 Gerald Combs
#
2018-03-06 14:31:02 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
2011-07-15 21:48:02 +00:00
2018-04-15 09:44:18 +00:00
shopt -s extglob
2013-07-06 19:32:07 +00:00
2018-05-18 20:03:11 +00:00
#
# Get the major version of Darwin, so we can check the major macOS
# version.
#
DARWIN_MAJOR_VERSION = ` uname -r | sed 's/\([0-9]*\).*/\1/' `
#
2022-04-20 23:44:29 +00:00
# The minimum supported version of Qt is 5.9, so the minimum supported version
# of macOS is OS X 10.10 (Yosemite), aka Darwin 14.0
if [ [ $DARWIN_MAJOR_VERSION -lt 14 ] ] ; then
echo "This script does not support any versions of macOS before Yosemite" 1>& 2
2018-05-18 20:03:11 +00:00
exit 1
fi
2021-05-27 12:18:45 +00:00
#
# Get the processor architecture of Darwin. Currently supported: arm, i386
#
DARWIN_PROCESSOR_ARCH = ` uname -p`
if [ " $DARWIN_PROCESSOR_ARCH " != "arm" -a " $DARWIN_PROCESSOR_ARCH " != "i386" ] ; then
echo "This script does not support this processor architecture" 1>& 2
exit 1
fi
2013-07-05 23:26:15 +00:00
#
2013-10-29 01:49:59 +00:00
# Versions of packages to download and install.
#
2018-05-19 00:29:25 +00:00
#
# We use curl, but older versions of curl in older macOS releases can't
# handle some sites - including the xz site.
#
# If the version of curl in the system is older than 7.54.0, download
# curl and install it.
#
current_curl_version = ` curl --version | sed -n 's/curl \([0-9.]*\) .*/\1/p' `
current_curl_major_version = " `expr $current_curl_version : '\([0-9][0-9]*\).*'` "
current_curl_minor_version = " `expr $current_curl_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
if [ [ $current_curl_major_version -lt 7 ||
( $current_curl_major_version -eq 7 &&
$current_curl_minor_version -lt 54) ] ] ; then
CURL_VERSION = ${ CURL_VERSION -7.60.0 }
fi
2013-10-29 01:49:59 +00:00
#
# Some packages need xz to unpack their current source.
2022-04-20 23:44:29 +00:00
# XXX: tar, since macOS 10.9, can uncompress xz'ed tarballs,
# so perhaps we could get rid of this now?
2013-10-29 01:49:59 +00:00
#
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
XZ_VERSION = 5.2.5
2013-10-29 01:49:59 +00:00
2017-06-16 07:19:53 +00:00
#
# Some packages need lzip to unpack their current source.
#
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
LZIP_VERSION = 1.21
#
# The version of libPCRE on Catalina is insufficient to build glib due to
# missing UTF-8 support.
#
2022-01-05 02:19:20 +00:00
PCRE_VERSION = 8.45
2017-06-16 07:19:53 +00:00
2013-10-29 01:49:59 +00:00
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# CMake is required to do the build - and to build some of the
# dependencies.
2013-10-29 01:49:59 +00:00
#
2022-04-20 23:44:29 +00:00
CMAKE_VERSION = ${ CMAKE_VERSION -3.21.4 }
2013-10-29 01:49:59 +00:00
2018-05-15 03:42:32 +00:00
#
# Ninja isn't required, as make is provided with Xcode, but it is
# claimed to build faster than make.
# Comment it out if you don't want it.
#
2021-07-27 07:26:28 +00:00
NINJA_VERSION = ${ NINJA_VERSION -1.10.2 }
2018-05-15 03:42:32 +00:00
2013-07-05 23:26:15 +00:00
#
2013-10-29 01:49:59 +00:00
# The following libraries and tools are required even to build only TShark.
2013-07-05 23:26:15 +00:00
#
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
GETTEXT_VERSION = 0.21
2021-08-24 18:45:34 +00:00
GLIB_VERSION = 2.68.4
2021-07-29 21:06:58 +00:00
if [ " $GLIB_VERSION " ] ; then
GLIB_MAJOR_VERSION = " `expr $GLIB_VERSION : '\([0-9][0-9]*\).*'` "
GLIB_MINOR_VERSION = " `expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
GLIB_DOTDOT_VERSION = " `expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
GLIB_MAJOR_MINOR_VERSION = $GLIB_MAJOR_VERSION .$GLIB_MINOR_VERSION
GLIB_MAJOR_MINOR_DOTDOT_VERSION = $GLIB_MAJOR_VERSION .$GLIB_MINOR_VERSION .$GLIB_DOTDOT_VERSION
fi
2017-04-19 16:14:00 +00:00
PKG_CONFIG_VERSION = 0.29.2
2017-06-16 07:30:46 +00:00
#
# libgpg-error is required for libgcrypt.
#
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
LIBGPG_ERROR_VERSION = 1.39
2017-06-16 07:30:46 +00:00
#
# libgcrypt is required.
#
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
LIBGCRYPT_VERSION = 1.8.7
2021-11-12 20:23:16 +00:00
#
# libpcre2 is required.
#
PCRE2_VERSION = 10.39
2013-10-23 01:39:54 +00:00
2013-10-29 01:49:59 +00:00
#
# One or more of the following libraries are required to build Wireshark.
#
2018-04-09 05:03:07 +00:00
# To override the version of Qt call the script with some of the variables
# set to the new values. Setting the variable to empty will disable building
# the toolkit and will uninstall # any version previously installed by the
# script, e.g.
2018-04-15 09:44:18 +00:00
# "QT_VERSION=5.10.1 ./macos-setup.sh"
# will build and install with QT 5.10.1.
2015-12-29 18:42:27 +00:00
#
2022-04-20 23:44:29 +00:00
QT_VERSION = ${ QT_VERSION -5.12.12 }
2018-04-09 05:03:07 +00:00
2015-04-17 06:18:57 +00:00
if [ " $QT_VERSION " ] ; then
QT_MAJOR_VERSION = " `expr $QT_VERSION : '\([0-9][0-9]*\).*'` "
QT_MINOR_VERSION = " `expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
QT_DOTDOT_VERSION = " `expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
QT_MAJOR_MINOR_VERSION = $QT_MAJOR_VERSION .$QT_MINOR_VERSION
2015-10-11 21:35:47 +00:00
QT_MAJOR_MINOR_DOTDOT_VERSION = $QT_MAJOR_VERSION .$QT_MINOR_VERSION .$QT_DOTDOT_VERSION
2015-04-17 06:18:57 +00:00
fi
2013-07-05 23:26:15 +00:00
#
# The following libraries are optional.
# Comment them out if you don't want them, but note that some of
# the optional libraries are required by other optional libraries.
#
LIBSMI_VERSION = 0.4.8
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
GNUTLS_VERSION = 3.6.15
2017-06-16 07:19:53 +00:00
if [ " $GNUTLS_VERSION " ] ; then
#
# We'll be building GnuTLS, so we may need some additional libraries.
# We assume GnuTLS can work with Nettle; newer versions *only* use
# Nettle, not libgcrypt.
#
GNUTLS_MAJOR_VERSION = " `expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'` "
GNUTLS_MINOR_VERSION = " `expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
2020-05-27 12:27:19 +00:00
NETTLE_VERSION = 3.6
2017-06-16 07:19:53 +00:00
#
# And, in turn, Nettle requires GMP.
#
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
GMP_VERSION = 6.2.1
2020-11-26 06:10:34 +00:00
#
# And p11-kit
P11KIT_VERSION = 0.23.21
# Which requires libtasn1
LIBTASN1_VERSION = 4.16.0
2017-06-16 07:19:53 +00:00
fi
2016-08-09 19:48:49 +00:00
# Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3
2015-01-28 19:39:04 +00:00
# yet, and we need to check for compatibility issues (we'd want Lua
# scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua
# features present in all three versions)
2016-08-09 19:48:49 +00:00
LUA_VERSION = 5.2.4
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
SNAPPY_VERSION = 1.1.8
2019-08-12 21:57:45 +00:00
ZSTD_VERSION = 1.4.2
2019-01-17 17:08:35 +00:00
LIBXML2_VERSION = 2.9.9
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
LZ4_VERSION = 1.9.2
2016-10-20 08:36:36 +00:00
SBC_VERSION = 1.3
2018-11-12 23:09:06 +00:00
CARES_VERSION = 1.15.0
2022-01-18 21:01:30 +00:00
LIBSSH_VERSION = 0.9.6
2018-02-09 01:20:26 +00:00
# mmdbresolve
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
MAXMINDDB_VERSION = 1.4.3
2022-01-01 14:17:43 +00:00
NGHTTP2_VERSION = 1.46.0
2017-08-01 23:36:01 +00:00
SPANDSP_VERSION = 0.0.6
2020-01-13 21:48:10 +00:00
SPEEXDSP_VERSION = 1.2.0
2017-08-01 23:36:01 +00:00
if [ " $SPANDSP_VERSION " ] ; then
#
# SpanDSP depends on libtiff.
#
LIBTIFF_VERSION = 3.8.1
fi
2017-08-02 00:04:15 +00:00
BCG729_VERSION = 1.0.2
2020-06-01 22:21:57 +00:00
ILBC_VERSION = 2.0.2
2020-09-29 04:33:06 +00:00
OPUS_VERSION = 1.3.1
2021-01-03 18:09:34 +00:00
2021-07-29 19:32:10 +00:00
#
# Is /usr/bin/python3 a working version of Python? It may be, as it
# might be a wrapper that runs the Python 3 that's part of Xcode.
#
2021-07-29 21:50:10 +00:00
if /usr/bin/python3 --version >/dev/null 2>& 1
2021-07-29 19:32:10 +00:00
then
#
# Yes - don't bother installing Python 3 from elsewhere
#
:
2021-01-03 18:09:34 +00:00
else
2021-07-29 19:32:10 +00:00
#
# No - install a Python package.
#
2022-04-20 23:44:29 +00:00
PYTHON3_VERSION = 3.9.5
2021-01-03 18:09:34 +00:00
fi
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
BROTLI_VERSION = 1.0.9
2019-09-17 16:31:39 +00:00
# minizip
ZLIB_VERSION = 1.2.11
2019-11-14 16:08:28 +00:00
# Uncomment to enable automatic updates using Sparkle
2022-04-20 19:59:29 +00:00
#SPARKLE_VERSION=2.1.0
2019-09-17 16:31:39 +00:00
#
# Asciidoctor is required to build the documentation.
#
2021-11-17 10:46:09 +00:00
ASCIIDOCTOR_VERSION = ${ ASCIIDOCTOR_VERSION -2.0.16 }
ASCIIDOCTORPDF_VERSION = ${ ASCIIDOCTORPDF_VERSION -1.6.1 }
2016-08-26 13:18:29 +00:00
2013-07-06 19:32:07 +00:00
#
2023-01-08 23:15:33 +00:00
# GNU autotools. They're not supplied with the macOS versions we
# support, and we currently use them for minizip.
2013-07-06 19:32:07 +00:00
#
2023-01-08 23:15:33 +00:00
AUTOCONF_VERSION = 2.71
AUTOMAKE_VERSION = 1.16.5
2016-07-29 20:21:13 +00:00
LIBTOOL_VERSION = 2.4.6
2013-07-05 23:26:15 +00:00
2018-05-19 00:29:25 +00:00
install_curl( ) {
if [ " $CURL_VERSION " -a ! -f curl-$CURL_VERSION -done ] ; then
echo "Downloading, building, and installing curl:"
[ -f curl-$CURL_VERSION .tar.bz2 ] || curl -L -O https://curl.haxx.se/download/curl-$CURL_VERSION .tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat curl-$CURL_VERSION .tar.bz2 | tar xf - || exit 1
cd curl-$CURL_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch curl-$CURL_VERSION -done
fi
}
uninstall_curl( ) {
if [ ! -z " $installed_curl_version " ] ; then
echo "Uninstalling curl:"
cd curl-$installed_curl_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm curl-$installed_curl_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf curl-$installed_curl_version
rm -rf curl-$installed_curl_version .tar.bz2
fi
installed_curl_version = ""
fi
}
2015-01-22 00:17:07 +00:00
install_xz( ) {
2015-01-22 02:09:30 +00:00
if [ " $XZ_VERSION " -a ! -f xz-$XZ_VERSION -done ] ; then
echo "Downloading, building, and installing xz:"
2021-11-12 17:25:12 +00:00
[ -f xz-$XZ_VERSION .tar.bz2 ] || curl -L -O https://tukaani.org/xz/xz-$XZ_VERSION .tar.bz2 || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
bzcat xz-$XZ_VERSION .tar.bz2 | tar xf - || exit 1
cd xz-$XZ_VERSION
2019-02-23 19:21:06 +00:00
#
# This builds and installs liblzma, which libxml2 uses, and
# Wireshark uses liblzma, so we need to build this with
# all the minimum-deployment-version and SDK stuff.
#
CFLAGS = " $CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2015-01-22 02:09:30 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch xz-$XZ_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_xz( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_xz_version " ] ; then
echo "Uninstalling xz:"
cd xz-$installed_xz_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm xz-$installed_xz_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf xz-$installed_xz_version
rm -rf xz-$installed_xz_version .tar.bz2
fi
2015-01-22 02:09:30 +00:00
installed_xz_version = ""
fi
2015-01-22 00:17:07 +00:00
}
2017-06-16 07:19:53 +00:00
install_lzip( ) {
if [ " $LZIP_VERSION " -a ! -f lzip-$LZIP_VERSION -done ] ; then
echo "Downloading, building, and installing lzip:"
2021-11-12 17:25:12 +00:00
[ -f lzip-$LZIP_VERSION .tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION .tar.gz || exit 1
2017-06-16 07:19:53 +00:00
$no_build && echo "Skipping installation" && return
gzcat lzip-$LZIP_VERSION .tar.gz | tar xf - || exit 1
cd lzip-$LZIP_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lzip-$LZIP_VERSION -done
fi
}
uninstall_lzip( ) {
if [ ! -z " $installed_lzip_version " ] ; then
echo "Uninstalling lzip:"
cd lzip-$installed_lzip_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm lzip-$installed_lzip_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lzip-$installed_lzip_version
rm -rf lzip-$installed_lzip_version .tar.gz
fi
installed_lzip_version = ""
fi
}
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
install_pcre( ) {
if [ " $PCRE_VERSION " -a ! -f pcre-$PCRE_VERSION -done ] ; then
echo "Downloading, building, and installing pcre:"
2022-01-05 02:19:20 +00:00
[ -f pcre-$PCRE_VERSION .tar.bz2 ] || curl -L -O https://sourceforge.net/projects/pcre/files/pcre/$PCRE_VERSION /pcre-$PCRE_VERSION .tar.bz2 || exit 1
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
$no_build && echo "Skipping installation" && return
bzcat pcre-$PCRE_VERSION .tar.bz2 | tar xf - || exit 1
cd pcre-$PCRE_VERSION
./configure --enable-unicode-properties || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pcre-$PCRE_VERSION -done
fi
}
uninstall_pcre( ) {
if [ ! -z " $installed_pcre_version " ] ; then
echo "Uninstalling pcre:"
cd pcre-$installed_pcre_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pcre-$installed_pcre_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pcre-$installed_pcre_version
rm -rf pcre-$installed_pcre_version .tar.bz2
fi
installed_pcre_version = ""
fi
}
2021-11-12 20:23:16 +00:00
install_pcre2( ) {
if [ " $PCRE2_VERSION " -a ! -f " pcre2- $PCRE2_VERSION -done " ] ; then
echo "Downloading, building, and installing pcre2:"
[ -f " pcre2- $PCRE2_VERSION .tar.bz2 " ] || curl -L -O " https://github.com/PhilipHazel/pcre2/releases/download/pcre2- $PCRE2_VERSION /pcre2-10.39.tar.bz2 " || exit 1
$no_build && echo "Skipping installation" && return
bzcat " pcre2- $PCRE2_VERSION .tar.bz2 " | tar xf - || exit 1
cd " pcre2- $PCRE2_VERSION "
mkdir build_dir
cd build_dir
# https://github.com/Homebrew/homebrew-core/blob/master/Formula/pcre2.rb
# https://github.com/microsoft/vcpkg/blob/master/ports/pcre2/portfile.cmake
MACOSX_DEPLOYMENT_TARGET = $min_osx_target SDKROOT = " $SDKPATH " \
cmake -DBUILD_STATIC_LIBS= OFF -DBUILD_SHARED_LIBS= ON -DPCRE2_SUPPORT_JIT= ON -DPCRE2_SUPPORT_UNICODE= ON .. || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch " pcre2- $PCRE2_VERSION -done "
fi
}
uninstall_pcre2( ) {
if [ -n " $installed_pcre2_version " ] && [ -s " pcre2- $installed_pcre2_version /build_dir/install_manifest.txt " ] ; then
echo "Uninstalling pcre2:"
# PCRE2 10.39 installs pcre2unicode.3 twice, so this will return an error.
while read -r ; do $DO_RM -v " $REPLY " ; done < <( cat " pcre2- $installed_pcre2_version /build_dir/install_manifest.txt " ; echo )
rm " pcre2- $installed_pcre2_version -done "
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf " pcre2- $installed_pcre2_version "
rm -rf " pcre2- $installed_pcre2_version .tar.bz2 "
fi
installed_pcre2_version = ""
fi
}
2015-01-22 00:17:07 +00:00
install_autoconf( ) {
2015-01-22 02:09:30 +00:00
if [ " $AUTOCONF_VERSION " -a ! -f autoconf-$AUTOCONF_VERSION -done ] ; then
echo "Downloading, building and installing GNU autoconf..."
2017-04-05 09:31:48 +00:00
[ -f autoconf-$AUTOCONF_VERSION .tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION .tar.xz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
xzcat autoconf-$AUTOCONF_VERSION .tar.xz | tar xf - || exit 1
cd autoconf-$AUTOCONF_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch autoconf-$AUTOCONF_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_autoconf( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_autoconf_version " ] ; then
2015-01-22 08:18:40 +00:00
#
# automake and libtool depend on this, so uninstall them.
#
2020-12-17 02:14:30 +00:00
uninstall_libtool " $@ "
uninstall_automake " $@ "
2015-01-22 08:18:40 +00:00
2015-01-22 02:09:30 +00:00
echo "Uninstalling GNU autoconf:"
cd autoconf-$installed_autoconf_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm autoconf-$installed_autoconf_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf autoconf-$installed_autoconf_version
rm -rf autoconf-$installed_autoconf_version .tar.xz
fi
2015-01-22 02:09:30 +00:00
installed_autoconf_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_automake( ) {
2015-01-22 02:09:30 +00:00
if [ " $AUTOMAKE_VERSION " -a ! -f automake-$AUTOMAKE_VERSION -done ] ; then
echo "Downloading, building and installing GNU automake..."
2017-04-05 09:31:48 +00:00
[ -f automake-$AUTOMAKE_VERSION .tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION .tar.xz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
xzcat automake-$AUTOMAKE_VERSION .tar.xz | tar xf - || exit 1
cd automake-$AUTOMAKE_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch automake-$AUTOMAKE_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_automake( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_automake_version " ] ; then
2015-01-22 08:18:40 +00:00
#
# libtool depends on this(?), so uninstall it.
#
2015-04-16 21:21:00 +00:00
uninstall_libtool " $@ "
2015-01-22 08:18:40 +00:00
2015-01-22 02:09:30 +00:00
echo "Uninstalling GNU automake:"
cd automake-$installed_automake_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm automake-$installed_automake_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf automake-$installed_automake_version
rm -rf automake-$installed_automake_version .tar.xz
fi
2015-01-22 02:09:30 +00:00
installed_automake_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_libtool( ) {
2015-01-22 02:09:30 +00:00
if [ " $LIBTOOL_VERSION " -a ! -f libtool-$LIBTOOL_VERSION -done ] ; then
echo "Downloading, building and installing GNU libtool..."
2017-04-05 09:31:48 +00:00
[ -f libtool-$LIBTOOL_VERSION .tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION .tar.xz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
xzcat libtool-$LIBTOOL_VERSION .tar.xz | tar xf - || exit 1
cd libtool-$LIBTOOL_VERSION
2019-09-18 16:25:27 +00:00
./configure --program-prefix= g || exit 1
2015-01-22 02:09:30 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libtool-$LIBTOOL_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_libtool( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_libtool_version " ] ; then
echo "Uninstalling GNU libtool:"
cd libtool-$installed_libtool_version
$DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool
$DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtool-$installed_libtool_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtool-$installed_libtool_version
rm -rf libtool-$installed_libtool_version .tar.xz
fi
2015-01-22 02:09:30 +00:00
installed_libtool_version = ""
fi
2015-01-22 00:17:07 +00:00
}
2018-05-15 03:42:32 +00:00
install_ninja( ) {
if [ " $NINJA_VERSION " -a ! -f ninja-$NINJA_VERSION -done ] ; then
echo "Downloading and installing Ninja:"
#
# Download the zipball, unpack it, and move the binary to
# /usr/local/bin.
#
[ -f ninja-mac-v$NINJA_VERSION .zip ] || curl -L -o ninja-mac-v$NINJA_VERSION .zip https://github.com/ninja-build/ninja/releases/download/v$NINJA_VERSION /ninja-mac.zip || exit 1
$no_build && echo "Skipping installation" && return
unzip ninja-mac-v$NINJA_VERSION .zip
sudo mv ninja /usr/local/bin
touch ninja-$NINJA_VERSION -done
fi
}
uninstall_ninja( ) {
if [ ! -z " $installed_ninja_version " ] ; then
echo "Uninstalling Ninja:"
sudo rm /usr/local/bin/ninja
2020-12-17 02:14:30 +00:00
rm ninja-$installed_ninja_version -done
2018-05-15 03:42:32 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
rm -f ninja-mac-v$installed_ninja_version .zip
fi
installed_ninja_version = ""
fi
}
2018-02-26 23:11:51 +00:00
install_asciidoctor( ) {
if [ ! -f asciidoctor-${ ASCIIDOCTOR_VERSION } -done ] ; then
echo "Downloading and installing Asciidoctor:"
sudo gem install -V asciidoctor --version " = ${ ASCIIDOCTOR_VERSION } "
touch asciidoctor-${ ASCIIDOCTOR_VERSION } -done
fi
}
uninstall_asciidoctor( ) {
if [ ! -z " $installed_asciidoctor_version " ] ; then
echo "Uninstalling Asciidoctor:"
sudo gem uninstall -V asciidoctor --version " = ${ installed_asciidoctor_version } "
rm asciidoctor-$installed_asciidoctor_version -done
##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
## rm -f asciidoctor-$installed_asciidoctor_version
##fi
installed_asciidoctor_version = ""
fi
}
install_asciidoctorpdf( ) {
if [ ! -f asciidoctorpdf-${ ASCIIDOCTORPDF_VERSION } -done ] ; then
## XXX gem does not track dependencies that are installed for asciidoctor-pdf
## record them for uninstallation
## ttfunk, pdf-core, prawn, prawn-table, Ascii85, ruby-rc4, hashery, afm, pdf-reader, prawn-templates, public_suffix, addressable, css_parser, prawn-svg, prawn-icon, safe_yaml, thread_safe, polyglot, treetop, asciidoctor-pdf
echo "Downloading and installing Asciidoctor-pdf:"
2021-11-17 10:46:09 +00:00
sudo gem install -V asciidoctor-pdf --version " = ${ ASCIIDOCTORPDF_VERSION } "
2018-02-26 23:11:51 +00:00
touch asciidoctorpdf-${ ASCIIDOCTORPDF_VERSION } -done
fi
}
uninstall_asciidoctorpdf( ) {
if [ ! -z " $installed_asciidoctorpdf_version " ] ; then
echo "Uninstalling Asciidoctor:"
sudo gem uninstall -V asciidoctor-pdf --version " = ${ installed_asciidoctorpdf_version } "
## XXX uninstall dependencies
rm asciidoctorpdf-$installed_asciidoctorpdf_version -done
##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
## rm -f asciidoctorpdf-$installed_asciidoctorpdf_version
##fi
installed_asciidoctorpdf_version = ""
fi
}
2015-01-22 00:17:07 +00:00
install_cmake( ) {
2018-05-14 22:07:25 +00:00
if [ ! -f cmake-$CMAKE_VERSION -done ] ; then
2015-01-22 02:09:30 +00:00
echo "Downloading and installing CMake:"
2015-06-24 02:08:14 +00:00
CMAKE_MAJOR_VERSION = " `expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'` "
CMAKE_MINOR_VERSION = " `expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
CMAKE_MAJOR_MINOR_VERSION = $CMAKE_MAJOR_VERSION .$CMAKE_MINOR_VERSION
2015-01-22 02:09:30 +00:00
#
# NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the
# package in question supports both 32-bit and 64-bit x86.
#
2015-06-24 02:08:14 +00:00
case " $CMAKE_MAJOR_VERSION " in
2021-01-04 00:35:25 +00:00
0| 1| 2)
2015-06-24 02:08:14 +00:00
echo " CMake $CMAKE_VERSION " is too old 1>& 2
; ;
3)
#
# Download the DMG and do a drag install, where "drag" means
# "mv".
#
2021-04-03 12:50:17 +00:00
# 3.1.1 to 3.19.1 have a Darwin-x86_64 DMG.
# 3.19.2 has a macos-universal DMG for 10.10 and later
# 3.19.3 and later have a macos-universal DMG for 10.13 and later,
# and a macos10.10-universal DMG for 10.10 and later.
#
2021-05-30 16:50:00 +00:00
if [ " $CMAKE_MINOR_VERSION " -lt 5 ] ; then
2021-04-03 12:50:17 +00:00
echo " CMake $CMAKE_VERSION " is too old 1>& 2
elif [ " $CMAKE_MINOR_VERSION " -lt 19 -o \
" $CMAKE_VERSION " = 3.19.0 -o \
" $CMAKE_VERSION " = 3.19.1 ] ; then
2015-06-24 02:08:14 +00:00
type = "Darwin-x86_64"
2021-04-03 12:50:17 +00:00
elif [ " $CMAKE_VERSION " = 3.19.2 -o \
" $DARWIN_MAJOR_VERSION " -ge 17 ] ; then
type = "macos-universal"
else
type = "macos10.0-universal"
2015-06-24 02:08:14 +00:00
fi
2017-04-05 09:31:48 +00:00
[ -f cmake-$CMAKE_VERSION -$type .dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION /cmake-$CMAKE_VERSION -$type .dmg || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-06-24 02:08:14 +00:00
sudo hdiutil attach cmake-$CMAKE_VERSION -$type .dmg || exit 1
sudo ditto /Volumes/cmake-$CMAKE_VERSION -$type /CMake.app /Applications/CMake.app || exit 1
#
# Plant the appropriate symbolic links in /usr/local/bin.
# It's a drag-install, so there's no installer to make them,
# and the CMake code to put them in place is lame, as
#
# 1) it defaults to /usr/bin, not /usr/local/bin;
# 2) it doesn't request the necessary root privileges;
# 3) it can't be run from the command line;
#
# so we do it ourselves.
2015-10-11 21:35:47 +00:00
#
2015-06-24 02:08:14 +00:00
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i
done
sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION -$type
; ;
*)
; ;
esac
2015-01-22 02:09:30 +00:00
touch cmake-$CMAKE_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_cmake( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_cmake_version " ] ; then
echo "Uninstalling CMake:"
2015-06-24 02:08:14 +00:00
installed_cmake_major_version = " `expr $installed_cmake_version : '\([0-9][0-9]*\).*'` "
case " $installed_cmake_major_version " in
2021-01-04 00:35:25 +00:00
0| 1| 2)
2015-06-24 02:08:14 +00:00
echo " CMake $installed_cmake_version " is too old 1>& 2
; ;
3)
sudo rm -rf /Applications/CMake.app
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo rm -f /usr/local/bin/$i
done
rm cmake-$installed_cmake_version -done
; ;
esac
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
2015-06-24 02:08:14 +00:00
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
2015-01-22 08:30:47 +00:00
#
2015-06-24 02:08:14 +00:00
rm -f cmake-$installed_cmake_version -Darwin-x86_64.dmg
2021-01-04 00:35:25 +00:00
rm -f cmake-$installed_cmake_version -macos-universal.dmg
2021-04-03 12:50:17 +00:00
rm -f cmake-$installed_cmake_version -macos10.0-universal.dmg
2015-01-22 08:30:47 +00:00
fi
2015-01-22 02:09:30 +00:00
installed_cmake_version = ""
fi
2015-01-22 00:17:07 +00:00
}
2021-07-29 21:06:58 +00:00
install_meson( ) {
#
# Install Meson with pip3 if we don't have it already.
#
2021-07-30 10:45:41 +00:00
if $MESON --version >/dev/null 2>& 1
2021-07-29 21:06:58 +00:00
then
2021-07-30 10:45:41 +00:00
# We have it.
2021-07-29 21:06:58 +00:00
:
else
sudo pip3 install meson
2021-07-30 10:45:41 +00:00
touch meson-done
2021-07-29 21:06:58 +00:00
fi
}
uninstall_meson( ) {
#
2021-07-30 10:45:41 +00:00
# If we installed Meson, uninstal it with pip3.
2021-07-29 21:06:58 +00:00
#
2021-07-30 10:45:41 +00:00
if [ -f meson-done ] ; then
sudo pip3 uninstall meson
rm -f meson-done
fi
2021-07-29 21:06:58 +00:00
}
2015-01-22 00:17:07 +00:00
install_gettext( ) {
2015-01-22 02:09:30 +00:00
if [ ! -f gettext-$GETTEXT_VERSION -done ] ; then
echo "Downloading, building, and installing GNU gettext:"
2021-11-12 17:25:12 +00:00
[ -f gettext-$GETTEXT_VERSION .tar.gz ] || curl -L -O https://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
gzcat gettext-$GETTEXT_VERSION .tar.gz | tar xf - || exit 1
cd gettext-$GETTEXT_VERSION
CFLAGS = " $CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
2018-04-15 09:44:18 +00:00
touch gettext-$GETTEXT_VERSION -done
2015-01-22 02:09:30 +00:00
fi
2015-01-22 00:17:07 +00:00
}
uninstall_gettext( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_gettext_version " ] ; then
2015-01-22 04:15:05 +00:00
#
# GLib depends on this, so uninstall it.
#
2015-01-22 08:30:47 +00:00
uninstall_glib " $@ "
2015-01-22 04:15:05 +00:00
2015-01-22 02:09:30 +00:00
echo "Uninstalling GNU gettext:"
cd gettext-$installed_gettext_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gettext-$installed_gettext_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gettext-$installed_gettext_version
rm -rf gettext-$installed_gettext_version .tar.gz
fi
2015-01-22 02:09:30 +00:00
installed_gettext_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_pkg_config( ) {
2015-01-22 02:09:30 +00:00
if [ ! -f pkg-config-$PKG_CONFIG_VERSION -done ] ; then
echo "Downloading, building, and installing pkg-config:"
2017-04-05 09:31:48 +00:00
[ -f pkg-config-$PKG_CONFIG_VERSION .tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
gzcat pkg-config-$PKG_CONFIG_VERSION .tar.gz | tar xf - || exit 1
cd pkg-config-$PKG_CONFIG_VERSION
./configure --with-internal-glib || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pkg-config-$PKG_CONFIG_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_pkg_config( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_pkg_config_version " ] ; then
echo "Uninstalling pkg-config:"
cd pkg-config-$installed_pkg_config_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pkg-config-$installed_pkg_config_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pkg-config-$installed_pkg_config_version
rm -rf pkg-config-$installed_pkg_config_version .tar.gz
fi
2015-01-22 02:09:30 +00:00
installed_pkg_config_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_glib( ) {
2015-01-22 02:09:30 +00:00
if [ ! -f glib-$GLIB_VERSION -done ] ; then
echo "Downloading, building, and installing GLib:"
glib_dir = ` expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*' `
2018-04-10 04:58:26 +00:00
#
# Starting with GLib 2.28.8, xz-compressed tarballs are available.
#
2021-11-12 17:25:12 +00:00
[ -f glib-$GLIB_VERSION .tar.xz ] || curl -L -O https://download.gnome.org/sources/glib/$glib_dir /glib-$GLIB_VERSION .tar.xz || exit 1
2018-04-10 04:58:26 +00:00
$no_build && echo "Skipping installation" && return
xzcat glib-$GLIB_VERSION .tar.xz | tar xf - || exit 1
2015-01-22 02:09:30 +00:00
cd glib-$GLIB_VERSION
2015-01-22 00:17:07 +00:00
#
2021-08-24 18:45:34 +00:00
# First, determine where the system include files are.
2021-07-31 01:54:04 +00:00
# (It's not necessarily /usr/include.) There's a bit of a
# greasy hack here; pre-5.x versions of the developer tools
# don't support the --show-sdk-path option, and will produce
# no output, so includedir will be set to /usr/include
# (in those older versions of the developer tools, there is
# a /usr/include directory).
2015-01-22 02:09:30 +00:00
#
2021-07-31 01:54:04 +00:00
# We need this for several things we do later.
2015-01-22 02:09:30 +00:00
#
2020-12-16 22:09:22 +00:00
includedir = ` SDKROOT = " $SDKPATH " xcrun --show-sdk-path 2>/dev/null` /usr/include
2021-07-31 01:54:04 +00:00
#
# GLib's configuration procedure, whether autotools-based or
# Meson-based, really likes to use pkg-config to find libraries,
# including libffi.
#
# At least some versions of macOS provide libffi, but, as macOS
# doesn't provide pkg-config, they don't provide a .pc file for
# it, so the autotools-based configuration needs some trickery
# to get it to find the OS-supplied libffi, and the Meson-based
# configuration simply won't find it at all.
#
# So, if we have a system-provided libffi, but pkg-config
# doesn't find libffi, we construct a .pc file for that libffi,
# and install it in /usr/local/lib/pkgconfig.
#
if pkg-config libffi ; then
# It found libffi; no need to install a .pc file, and we
# don't want to overwrite what's there already.
:
elif [ ! -e $includedir /ffi/ffi.h ] ; then
# We don't appear to have libffi as part of the system, so
# let the configuration process figure out what to do.
#
# We test for the header file, not the library, because, in
# Big Sur and later, there's no guarantee that, for a system
# shared library, there's a corresponding dylib file in
# /usr/lib.
:
else
#
# We have libffi, but pkg-config didn't find it; generate
# and install the .pc file.
#
#
# Now generate the .pc file.
#
# We generate the contents of the .pc file by using cat with
# a here document containing a template for the file and
# piping that to a sed command that replaces @INCLUDEDIR@ in
# the template with the include directory we discovered
# above, so that the .pc file gives the compiler flags
# necessary to find the libffi headers (which are *not*
# necessarily in /usr/include, as per the above).
#
# The EOF marker for the here document is in quotes, to tell
# the shell not to do shell expansion, as .pc files use a
# syntax to refer to .pc file variables that looks like the
# syntax to refer to shell variables.
#
# The writing of the libffi.pc file is a greasy hack - the
# process of generating the contents of the .pc file writes
# to the standard output, but running the last process in
# the pipeline as root won't allow the shell that's
# *running* it to open the .pc file if we don't have write
# permission on /usr/local/lib/pkgconfig, so we need a
# program that creates a file and then reads from the
# standard input and writes to that file. UN*Xes have a
# program that does that; it's called "tee". :-)
#
# However, it *also* writes the file to the standard output,
# so we redirect that to /dev/null when we run it.
#
cat <<"EOF" | sed " s;@INCLUDEDIR@; $includedir ; " | $DO_TEE_TO_PC_FILE /usr/local/lib/pkgconfig/libffi.pc >/dev/null
prefix = /usr
libdir = ${ prefix } /lib
includedir = @INCLUDEDIR@
Name: ffi
Description: Library supporting Foreign Function Interfaces
Version: 3.2.9999
Libs: -L${ libdir } -lffi
Cflags: -I${ includedir } /ffi
EOF
fi
2021-07-29 21:06:58 +00:00
#
# GLib 2.59.1 and later use Meson+Ninja as the build system.
#
case $GLIB_MAJOR_VERSION in
2015-01-22 00:17:07 +00:00
2021-07-29 21:06:58 +00:00
1)
echo " GLib $GLIB_VERSION " is too old 1>& 2
; ;
*)
case $GLIB_MINOR_VERSION in
[ 0-9] | 1[ 0-9] | 2[ 0-9] | 3[ 0-7] )
echo " GLib $GLIB_VERSION " is too old 1>& 2
; ;
3[ 8-9] | 4[ 0-9] | 5[ 0-8] )
if [ ! -f ./configure ] ; then
LIBTOOLIZE = glibtoolize ./autogen.sh
fi
#
2021-07-31 01:54:04 +00:00
# At least with the version of Xcode that comes with
# Leopard, /usr/include/ffi/fficonfig.h doesn't define
# MACOSX, which causes the build of GLib to fail for at
# least some versions of GLib. If we don't find
# "#define.*MACOSX" in /usr/include/ffi/fficonfig.h,
# explicitly define it.
#
# While we're at it, suppress -Wformat-nonliteral to
# avoid a case where clang's stricter rules on when not
# to complain about non-literal format arguments cause
# it to complain about code that's safe but it wasn't
# told that. See my comment #25 in GNOME bug 691608:
2021-07-29 21:06:58 +00:00
#
2021-07-31 01:54:04 +00:00
# https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25
2021-07-29 21:06:58 +00:00
#
if grep -qs '#define.*MACOSX' $includedir /ffi/fficonfig.h
then
# It's defined, nothing to do
2021-07-31 01:54:04 +00:00
CFLAGS = " $CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2021-07-29 21:06:58 +00:00
else
2021-07-31 01:54:04 +00:00
CFLAGS = " $CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2021-07-29 21:06:58 +00:00
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
; ;
59| [ 6-9] [ 0-9] | [ 1-9] [ 0-9] [ 0-9] )
#
# 2.59.0 doesn't require Meson and Ninja, but it
# supports it, and I'm too lazy to add a dot-dot
# version check.
#
2021-07-31 02:20:13 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " $MESON _build || exit 1
2021-07-29 21:06:58 +00:00
ninja $MAKE_BUILD_OPTS -C _build || exit 1
$DO_NINJA_INSTALL || exit 1
; ;
*)
echo "Glib's put out 1000 2.x releases?" 1>& 2
; ;
esac
esac
2015-01-22 02:09:30 +00:00
cd ..
touch glib-$GLIB_VERSION -done
2015-01-22 00:17:07 +00:00
fi
}
uninstall_glib( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_glib_version " ] ; then
echo "Uninstalling GLib:"
cd glib-$installed_glib_version
2021-07-29 21:06:58 +00:00
installed_glib_major_version = " `expr $installed_glib_version : '\([0-9][0-9]*\).*'` "
installed_glib_minor_version = " `expr $installed_glib_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
installed_glib_dotdot_version = " `expr $installed_glib_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
installed_glib_major_minor_version = $installed_glib_major_version .$installed_glib_minor_version
installed_glib_major_minor_dotdot_version = $installed_glib_major_version .$installed_glib_minor_version .$installed_glib_dotdot_version
2020-12-19 22:21:15 +00:00
#
2021-07-29 21:06:58 +00:00
# GLib 2.59.1 and later use Meson+Ninja as the build system.
2020-12-19 22:21:15 +00:00
#
2021-07-29 21:06:58 +00:00
case $installed_glib_major_version in
1)
$DO_MAKE_UNINSTALL || exit 1
#
# This appears to delete dependencies out from under other
# Makefiles in the tree, causing it to fail. At least until
# that gets fixed, if it ever gets fixed, we just ignore the
# exit status of "make distclean"
#
# make distclean || exit 1
make distclean || echo "Ignoring make distclean failure" 1>& 2
; ;
*)
case $installed_glib_minor_version in
[ 0-9] | 1[ 0-9] | 2[ 0-9] | 3[ 0-9] | 4[ 0-9] | 5[ 0-8] )
$DO_MAKE_UNINSTALL || exit 1
#
# This appears to delete dependencies out from under other
# Makefiles in the tree, causing it to fail. At least until
# that gets fixed, if it ever gets fixed, we just ignore the
# exit status of "make distclean"
#
# make distclean || exit 1
make distclean || echo "Ignoring make distclean failure" 1>& 2
; ;
59| [ 6-9] [ 0-9] | [ 1-9] [ 0-9] [ 0-9] )
#
# 2.59.0 doesn't require Meson and Ninja, but it
# supports it, and I'm too lazy to add a dot-dot
# version check.
#
$DO_NINJA_UNINSTALL || exit 1
#
# For Meson+Ninja, we do the build in an _build
# subdirectory, so the equivalent of "make distclean"
# is just to remove the directory tree.
#
rm -rf _build
; ;
*)
echo "Glib's put out 1000 2.x releases?" 1>& 2
; ;
esac
esac
2015-01-22 02:09:30 +00:00
cd ..
rm glib-$installed_glib_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf glib-$installed_glib_version
2018-04-10 04:58:26 +00:00
rm -rf glib-$installed_glib_version .tar.xz
2015-01-22 08:30:47 +00:00
fi
2015-01-22 02:09:30 +00:00
installed_glib_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_qt( ) {
2015-01-22 02:09:30 +00:00
if [ " $QT_VERSION " -a ! -f qt-$QT_VERSION -done ] ; then
2019-10-13 02:38:49 +00:00
echo "Downloading and installing Qt:"
2015-01-22 02:09:30 +00:00
#
# What you get for this URL might just be a 302 Found reply, so use
# -L so we get redirected.
#
2018-05-15 03:25:10 +00:00
# 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg
# 5.2.0: qt-mac-opensource-{version}.dmg
# 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg
# 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg
2021-01-08 13:12:23 +00:00
# 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg
2021-01-13 11:58:34 +00:00
# 5.15 - 6.0: Offline installers no longer provided.
2021-11-12 17:25:12 +00:00
# ( https://download.qt.io/archive/qt/5.15/5.15.0/OFFLINE_README.txt )
2021-01-13 11:58:34 +00:00
# XXX: We need a different approach for QT >= 5.15
2018-04-09 05:03:07 +00:00
#
2018-05-15 03:25:10 +00:00
case $QT_MAJOR_VERSION in
2015-04-17 06:18:57 +00:00
2018-05-15 03:25:10 +00:00
1| 2| 3| 4)
echo " Qt $QT_VERSION " is too old 1>& 2
; ;
2021-04-03 12:50:17 +00:00
5)
2018-05-15 03:25:10 +00:00
case $QT_MINOR_VERSION in
2022-04-20 23:44:29 +00:00
0| 1| 2| 3| 4| 5| 6| 7| 8)
2018-05-16 07:07:49 +00:00
echo " Qt $QT_VERSION " is too old 1>& 2
2018-05-15 03:25:10 +00:00
; ;
2021-01-08 13:12:23 +00:00
9| 10| 11| 12| 13| 14)
2018-05-15 03:25:10 +00:00
QT_VOLUME = qt-opensource-mac-x64-$QT_VERSION
; ;
2021-04-03 12:50:17 +00:00
*)
2021-05-26 21:20:44 +00:00
echo " The Qt Company no longer provides open source offline installers for Qt $QT_VERSION " 1>& 2
; ;
2021-04-03 12:50:17 +00:00
2018-05-15 03:25:10 +00:00
esac
2021-11-12 17:25:12 +00:00
[ -f $QT_VOLUME .dmg ] || curl -L -O https://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION /$QT_MAJOR_MINOR_DOTDOT_VERSION /$QT_VOLUME .dmg || exit 1
2018-05-15 03:25:10 +00:00
$no_build && echo "Skipping installation" && return
sudo hdiutil attach $QT_VOLUME .dmg || exit 1
#
# Run the installer executable directly, so that we wait for
# it to finish. Then unmount the volume.
#
/Volumes/$QT_VOLUME /$QT_VOLUME .app/Contents/MacOS/$QT_VOLUME
sudo hdiutil detach /Volumes/$QT_VOLUME
touch qt-$QT_VERSION -done
2021-05-26 21:21:39 +00:00
; ;
2021-04-03 12:50:17 +00:00
*)
echo " The Qt Company no longer provides open source offline installers for Qt $QT_VERSION " 1>& 2
; ;
2018-05-15 03:25:10 +00:00
esac
2015-01-22 02:09:30 +00:00
fi
2015-01-22 00:17:07 +00:00
}
uninstall_qt( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_qt_version " ] ; then
echo "Uninstalling Qt:"
2015-04-17 06:18:57 +00:00
rm -rf $HOME /Qt$installed_qt_version
2015-01-22 02:09:30 +00:00
rm qt-$installed_qt_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
2015-04-17 06:18:57 +00:00
# Get rid of the previously downloaded version.
2015-01-22 08:30:47 +00:00
#
2018-05-15 03:25:10 +00:00
# 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg
# 5.2.0: qt-mac-opensource-{version}.dmg
# 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg
# 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg
2021-01-08 13:12:23 +00:00
# 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg
2018-05-15 03:25:10 +00:00
#
installed_qt_major_version = " `expr $installed_qt_version : '\([0-9][0-9]*\).*'` "
installed_qt_minor_version = " `expr $installed_qt_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
installed_qt_dotdot_version = " `expr $installed_qt_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
case $installed_qt_major_version in
1| 2| 3| 4)
echo " Qt $installed_qt_version " is too old 1>& 2
; ;
5*)
case $installed_qt_minor_version in
2022-04-20 23:44:29 +00:00
0| 1| 2| 3| 4| 5)
2021-01-08 13:12:23 +00:00
echo " Qt $installed_qt_version " is too old 1>& 2
2018-05-15 03:25:10 +00:00
; ;
2022-04-20 23:44:29 +00:00
6| 7| 8)
2018-05-15 03:25:10 +00:00
installed_qt_volume = qt-opensource-mac-x64-clang-$installed_qt_version .dmg
; ;
2021-01-13 11:58:34 +00:00
9| 10| 11| 12| 13| 14)
2018-05-15 03:25:10 +00:00
installed_qt_volume = qt-opensource-mac-x64-$installed_qt_version .dmg
; ;
esac
esac
rm -f $installed_qt_volume
2015-01-22 08:30:47 +00:00
fi
2015-01-22 02:09:30 +00:00
installed_qt_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_libsmi( ) {
2015-01-22 02:09:30 +00:00
if [ " $LIBSMI_VERSION " -a ! -f libsmi-$LIBSMI_VERSION -done ] ; then
echo "Downloading, building, and installing libsmi:"
[ -f libsmi-$LIBSMI_VERSION .tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
gzcat libsmi-$LIBSMI_VERSION .tar.gz | tar xf - || exit 1
cd libsmi-$LIBSMI_VERSION
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libsmi-$LIBSMI_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_libsmi( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_libsmi_version " ] ; then
echo "Uninstalling libsmi:"
cd libsmi-$installed_libsmi_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libsmi-$installed_libsmi_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libsmi-$installed_libsmi_version
rm -rf libsmi-$installed_libsmi_version .tar.gz
fi
2015-01-22 02:09:30 +00:00
installed_libsmi_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_libgpg_error( ) {
2015-01-22 02:09:30 +00:00
if [ " $LIBGPG_ERROR_VERSION " -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION -done ] ; then
echo "Downloading, building, and installing libgpg-error:"
2018-09-21 04:43:10 +00:00
[ -f libgpg-error-$LIBGPG_ERROR_VERSION .tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION .tar.bz2 || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
bzcat libgpg-error-$LIBGPG_ERROR_VERSION .tar.bz2 | tar xf - || exit 1
cd libgpg-error-$LIBGPG_ERROR_VERSION
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgpg-error-$LIBGPG_ERROR_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_libgpg_error( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_libgpg_error_version " ] ; then
2015-01-22 04:15:05 +00:00
#
# libgcrypt depends on this, so uninstall it.
#
2015-01-22 08:30:47 +00:00
uninstall_libgcrypt " $@ "
2015-01-22 04:15:05 +00:00
2015-01-22 02:09:30 +00:00
echo "Uninstalling libgpg-error:"
cd libgpg-error-$installed_libgpg_error_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgpg-error-$installed_libgpg_error_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgpg-error-$installed_libgpg_error_version
rm -rf libgpg-error-$installed_libgpg_error_version .tar.bz2
fi
2015-01-22 02:09:30 +00:00
installed_libgpg_error_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_libgcrypt( ) {
2015-01-22 02:09:30 +00:00
if [ " $LIBGCRYPT_VERSION " -a ! -f libgcrypt-$LIBGCRYPT_VERSION -done ] ; then
#
# libgpg-error is required for libgcrypt.
#
if [ -z $LIBGPG_ERROR_VERSION ]
then
echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>& 2
exit 1
fi
2015-01-22 00:17:07 +00:00
2015-01-22 02:09:30 +00:00
echo "Downloading, building, and installing libgcrypt:"
2018-09-21 04:43:10 +00:00
[ -f libgcrypt-$LIBGCRYPT_VERSION .tar.gz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
gzcat libgcrypt-$LIBGCRYPT_VERSION .tar.gz | tar xf - || exit 1
cd libgcrypt-$LIBGCRYPT_VERSION
#
2017-04-05 17:50:53 +00:00
# The assembler language code is not compatible with the macOS
2015-01-22 02:09:30 +00:00
# x86 assembler (or is it an x86-64 vs. x86-32 issue?).
#
# libgcrypt expects gnu89, not c99/gnu99, semantics for
# "inline". See, for example:
#
2021-11-12 17:25:12 +00:00
# https://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html
2015-01-22 02:09:30 +00:00
#
2019-02-22 19:15:58 +00:00
CFLAGS = " $CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --disable-asm || exit 1
2015-01-22 02:09:30 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgcrypt-$LIBGCRYPT_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_libgcrypt( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_libgcrypt_version " ] ; then
echo "Uninstalling libgcrypt:"
cd libgcrypt-$installed_libgcrypt_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgcrypt-$installed_libgcrypt_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgcrypt-$installed_libgcrypt_version
rm -rf libgcrypt-$installed_libgcrypt_version .tar.gz
fi
2015-01-22 02:09:30 +00:00
installed_libgcrypt_version = ""
fi
2015-01-22 00:17:07 +00:00
}
2017-06-16 07:19:53 +00:00
install_gmp( ) {
if [ " $GMP_VERSION " -a ! -f gmp-$GMP_VERSION -done ] ; then
echo "Downloading, building, and installing GMP:"
2017-06-22 06:10:46 +00:00
[ -f gmp-$GMP_VERSION .tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION .tar.lz || exit 1
2017-06-16 07:19:53 +00:00
$no_build && echo "Skipping installation" && return
lzip -c -d gmp-$GMP_VERSION .tar.lz | tar xf - || exit 1
cd gmp-$GMP_VERSION
2019-02-25 22:40:54 +00:00
# Create a fat binary: https://gmplib.org/manual/Notes-for-Package-Builds.html
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --enable-fat || exit 1
2017-06-16 07:19:53 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gmp-$GMP_VERSION -done
fi
}
uninstall_gmp( ) {
if [ ! -z " $installed_gmp_version " ] ; then
#
# Nettle depends on this, so uninstall it.
#
uninstall_nettle " $@ "
echo "Uninstalling GMP:"
cd gmp-$installed_gmp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gmp-$installed_gmp_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gmp-$installed_gmp_version
rm -rf gmp-$installed_gmp_version .tar.lz
fi
installed_gmp_version = ""
fi
}
2020-11-26 06:10:34 +00:00
install_libtasn1( ) {
if [ " $LIBTASN1_VERSION " -a ! -f libtasn1-$LIBTASN1_VERSION -done ] ; then
echo "Downloading, building, and installing libtasn1:"
[ -f libtasn1-$LIBTASN1_VERSION .tar.gz ] || curl -L -O https://ftpmirror.gnu.org/libtasn1/libtasn1-$LIBTASN1_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libtasn1-$LIBTASN1_VERSION .tar.gz | tar xf - || exit 1
cd libtasn1-$LIBTASN1_VERSION
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libtasn1-$LIBTASN1_VERSION -done
fi
}
uninstall_libtasn1( ) {
if [ ! -z " $installed_libtasn1_version " ] ; then
#
# p11-kit depends on this, so uninstall it.
#
uninstall_p11_kit " $@ "
echo "Uninstalling libtasn1:"
2020-12-16 19:54:53 +00:00
cd libtasn1-$installed_libtasn1_version
2020-11-26 06:10:34 +00:00
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtasn1-$installed_libtasn1_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtasn1-$installed_libtasn1_version
rm -rf libtasn1-$installed_libtasn1_version .tar.gz
fi
installed_libtasn1_version = ""
fi
}
install_p11_kit( ) {
if [ " $P11KIT_VERSION " -a ! -f p11-kit-$P11KIT_VERSION -done ] ; then
echo "Downloading, building, and installing p11-kit:"
[ -f p11-kit-$P11KIT_VERSION .tar.xz ] || curl -L -O https://github.com/p11-glue/p11-kit/releases/download/$P11KIT_VERSION /p11-kit-$P11KIT_VERSION .tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat p11-kit-$P11KIT_VERSION .tar.xz | tar xf - || exit 1
cd p11-kit-$P11KIT_VERSION
2020-12-17 21:21:38 +00:00
#
# Prior to Catalina, the libffi that's supplied with macOS
# doesn't support ffi_closure_alloc() or ffi_prep_closure_loc(),
# both of which are required by p11-kit if built with libffi.
#
# According to
#
# https://p11-glue.github.io/p11-glue/p11-kit/manual/devel-building.html
#
# libffi is used "for sharing of PKCS#11 modules between
# multiple callers in the same process. It is highly recommended
# that this dependency be treated as a required dependency.",
# but it's not clear that this matters to us, so we just
# configure p11-kit not to use libffi.
#
CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --without-libffi --without-trust-paths || exit 1
2020-11-26 06:10:34 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch p11-kit-$P11KIT_VERSION -done
fi
}
uninstall_p11_kit( ) {
if [ ! -z " $installed_p11_kit_version " ] ; then
#
# Nettle depends on this, so uninstall it.
#
uninstall_nettle " $@ "
echo "Uninstalling p11-kit:"
cd p11-kit-$installed_p11_kit_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm p11-kit-$installed_p11_kit_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf p11-kit-$installed_p11_kit_version
rm -rf p11-kit-$installed_p11_kit_version .tar.xz
fi
installed_p11_kit_version = ""
fi
}
2017-06-16 07:19:53 +00:00
install_nettle( ) {
if [ " $NETTLE_VERSION " -a ! -f nettle-$NETTLE_VERSION -done ] ; then
echo "Downloading, building, and installing Nettle:"
[ -f nettle-$NETTLE_VERSION .tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat nettle-$NETTLE_VERSION .tar.gz | tar xf - || exit 1
cd nettle-$NETTLE_VERSION
2021-05-27 12:18:45 +00:00
if [ " $DARWIN_PROCESSOR_ARCH " = "arm" ] ; then
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --disable-assembler || exit 1
else
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
fi
2017-06-16 07:19:53 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nettle-$NETTLE_VERSION -done
fi
}
uninstall_nettle( ) {
if [ ! -z " $installed_nettle_version " ] ; then
#
# GnuTLS depends on this, so uninstall it.
#
uninstall_gnutls " $@ "
echo "Uninstalling Nettle:"
cd nettle-$installed_nettle_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nettle-$installed_nettle_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nettle-$installed_nettle_version
rm -rf nettle-$installed_nettle_version .tar.gz
fi
installed_nettle_version = ""
fi
}
2015-01-22 00:17:07 +00:00
install_gnutls( ) {
2015-01-22 02:09:30 +00:00
if [ " $GNUTLS_VERSION " -a ! -f gnutls-$GNUTLS_VERSION -done ] ; then
#
2017-06-16 07:19:53 +00:00
# GnuTLS requires Nettle.
2015-01-22 02:09:30 +00:00
#
2017-06-16 07:19:53 +00:00
if [ -z $NETTLE_VERSION ]
2015-01-22 02:09:30 +00:00
then
2017-06-16 07:19:53 +00:00
echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>& 2
2015-01-22 02:09:30 +00:00
exit 1
fi
2015-01-22 00:17:07 +00:00
2015-01-22 02:09:30 +00:00
echo "Downloading, building, and installing GnuTLS:"
2017-06-16 07:19:53 +00:00
if [ [ $GNUTLS_MAJOR_VERSION -ge 3 ] ]
then
#
# Starting with GnuTLS 3.x, the tarballs are compressed with
# xz rather than bzip2.
#
[ -f gnutls-$GNUTLS_VERSION .tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION .$GNUTLS_MINOR_VERSION /gnutls-$GNUTLS_VERSION .tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat gnutls-$GNUTLS_VERSION .tar.xz | tar xf - || exit 1
else
[ -f gnutls-$GNUTLS_VERSION .tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION .$GNUTLS_MINOR_VERSION /gnutls-$GNUTLS_VERSION .tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat gnutls-$GNUTLS_VERSION .tar.bz2 | tar xf - || exit 1
fi
2015-01-22 02:09:30 +00:00
cd gnutls-$GNUTLS_VERSION
2020-11-26 06:10:34 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --with-included-unistring --disable-guile || exit 1
2015-01-22 02:09:30 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gnutls-$GNUTLS_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_gnutls( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_gnutls_version " ] ; then
echo "Uninstalling GnuTLS:"
cd gnutls-$installed_gnutls_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gnutls-$installed_gnutls_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gnutls-$installed_gnutls_version
rm -rf gnutls-$installed_gnutls_version .tar.bz2
fi
2015-01-22 02:09:30 +00:00
installed_gnutls_version = ""
fi
2015-01-22 00:17:07 +00:00
}
install_lua( ) {
2015-01-22 02:09:30 +00:00
if [ " $LUA_VERSION " -a ! -f lua-$LUA_VERSION -done ] ; then
echo "Downloading, building, and installing Lua:"
2021-11-12 17:25:12 +00:00
[ -f lua-$LUA_VERSION .tar.gz ] || curl -L -O https://www.lua.org/ftp/lua-$LUA_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
gzcat lua-$LUA_VERSION .tar.gz | tar xf - || exit 1
cd lua-$LUA_VERSION
2015-10-14 05:19:27 +00:00
make MYCFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " MYLDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " $MAKE_BUILD_OPTS macosx || exit 1
2015-01-22 02:09:30 +00:00
$DO_MAKE_INSTALL || exit 1
cd ..
touch lua-$LUA_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_lua( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_lua_version " ] ; then
echo "Uninstalling Lua:"
#
# Lua has no "make uninstall", so just remove stuff manually.
# There's no configure script, so there's no need for
# "make distclean", either; just do "make clean".
#
( cd /usr/local/bin; $DO_RM -f lua luac)
( cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp)
( cd /usr/local/lib; $DO_RM -f liblua.a)
( cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1)
cd lua-$installed_lua_version
make clean || exit 1
cd ..
rm lua-$installed_lua_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lua-$installed_lua_version
rm -rf lua-$installed_lua_version .tar.gz
fi
2015-01-22 02:09:30 +00:00
installed_lua_version = ""
fi
2015-01-22 00:17:07 +00:00
}
2017-06-16 07:37:58 +00:00
install_snappy( ) {
if [ " $SNAPPY_VERSION " -a ! -f snappy-$SNAPPY_VERSION -done ] ; then
echo "Downloading, building, and installing snappy:"
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
[ -f snappy-$SNAPPY_VERSION .tar.gz ] || curl -L -o snappy-$SNAPPY_VERSION .tar.gz https://github.com/google/snappy/archive/$SNAPPY_VERSION .tar.gz || exit 1
2017-06-16 07:37:58 +00:00
$no_build && echo "Skipping installation" && return
gzcat snappy-$SNAPPY_VERSION .tar.gz | tar xf - || exit 1
cd snappy-$SNAPPY_VERSION
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
mkdir build_dir
cd build_dir
macos-setup: build snappy as a shared library.
The older versions of snappy apparently used autotools and build a
shared library by default; for example, Wireshark 3.2.6 for macOS is
built with snappy, and includes a snappy dynamic library in the app
bundle.
The current version uses CMake and does *not* build a shared library by
default. Instead, it builds a static library, which, when you try to
link it to a C-only shared library...
...does not work.
The linker sees that you're statically linking in a bunch of C++ .o
files and gets upset because it can't find C++ standard library routines
used by that code.
If it's a dynamic library, the library was itself already linked with
the C++ standard library, so the external references to that library
from the snappy library are already marked as having been resolved to
the extent that they're expected to be in the C++ standard library at
run time - and, when the dynamic snappy library is built, it's marked as
depending on the C++ standard library, so the run time linker will, when
it loads the snappy dynamic library, see that the C++ standard library
is required and will load it if it hasn't already been loaded.
2020-12-13 05:30:51 +00:00
#
# Build a shared library, because we'll be linking libwireshark,
# which is a C library, with libsnappy, and libsnappy is a C++
# library and requires the C++ run time; the shared library
# will carry that dependency with it, so linking with it should
# Just Work.
#
MACOSX_DEPLOYMENT_TARGET = $min_osx_target SDKROOT = " $SDKPATH " cmake -DBUILD_SHARED_LIBS= YES ../ || exit 1
2017-06-16 07:37:58 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
cd ../..
2017-06-16 07:37:58 +00:00
touch snappy-$SNAPPY_VERSION -done
fi
}
uninstall_snappy( ) {
if [ ! -z " $installed_snappy_version " ] ; then
echo "Uninstalling snappy:"
cd snappy-$installed_snappy_version
2020-12-12 23:51:10 +00:00
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# snappy uses cmake and doesn't support "make uninstall";
# just remove what we know it installs.
2020-12-12 23:51:10 +00:00
#
# $DO_MAKE_UNINSTALL || exit 1
2022-10-02 18:29:15 +00:00
if [ -s build_dir/install_manifest.txt ] ; then
2021-11-12 20:23:16 +00:00
while read -r ; do $DO_RM -v " $REPLY " ; done < <( cat build_dir/install_manifest.txt; echo )
else
$DO_RM -f /usr/local/lib/libsnappy.1.1.8.dylib \
/usr/local/lib/libsnappy.1.dylib \
/usr/local/lib/libsnappy.dylib \
/usr/local/include/snappy-c.h \
/usr/local/include/snappy-sinksource.h \
/usr/local/include/snappy-stubs-public.h \
/usr/local/include/snappy.h \
/usr/local/lib/cmake/Snappy/SnappyConfig.cmake \
/usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake \
/usr/local/lib/cmake/Snappy/SnappyTargets-noconfig.cmake \
/usr/local/lib/cmake/Snappy/SnappyTargets.cmake || exit 1
fi
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
#
# snappy uses cmake and doesn't support "make distclean";
#.just remove the entire build directory.
#
# make distclean || exit 1
rm -rf build_dir || exit 1
2017-06-16 07:37:58 +00:00
cd ..
rm snappy-$installed_snappy_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf snappy-$installed_snappy_version
rm -rf snappy-$installed_snappy_version .tar.gz
fi
installed_snappy_version = ""
fi
}
2019-08-12 21:57:45 +00:00
install_zstd( ) {
if [ " $ZSTD_VERSION " -a ! -f zstd-$ZSTD_VERSION -done ] ; then
echo "Downloading, building, and installing zstd:"
[ -f zstd-$ZSTD_VERSION .tar.gz ] || curl -L -O https://github.com/facebook/zstd/releases/download/v$ZSTD_VERSION /zstd-$ZSTD_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat zstd-$ZSTD_VERSION .tar.gz | tar xf - || exit 1
cd zstd-$ZSTD_VERSION
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch zstd-$ZSTD_VERSION -done
fi
}
uninstall_zstd( ) {
if [ ! -z " $installed_zstd_version " ] ; then
echo "Uninstalling zstd:"
cd zstd-$installed_zstd_version
$DO_MAKE_UNINSTALL || exit 1
2020-12-19 07:19:12 +00:00
#
# zstd has no configure script, so there's no need for
# "make distclean", and the Makefile supplied with it
# has no "make distclean" rule; just do "make clean".
#
make clean || exit 1
2019-08-12 21:57:45 +00:00
cd ..
rm zstd-$installed_zstd_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf zstd-$installed_zstd_version
rm -rf zstd-$installed_zstd_version .tar.gz
fi
installed_zstd_version = ""
fi
}
2017-06-16 07:37:58 +00:00
install_libxml2( ) {
if [ " $LIBXML2_VERSION " -a ! -f libxml2-$LIBXML2_VERSION -done ] ; then
echo "Downloading, building, and installing libxml2:"
[ -f libxml2-$LIBXML2_VERSION .tar.gz ] || curl -L -O ftp://xmlsoft.org/libxml2/libxml2-$LIBXML2_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libxml2-$LIBXML2_VERSION .tar.gz | tar xf - || exit 1
cd libxml2-$LIBXML2_VERSION
2021-12-13 22:22:06 +00:00
#
# At least on macOS 12.0.1 with Xcode 13.1, when we build
# libxml2, the linker complains that we don't have the right
# to link with the Python framework, so don't build with
# Python.
#
CFLAGS = " $CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --without-python || exit 1
2017-06-16 07:37:58 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libxml2-$LIBXML2_VERSION -done
fi
}
uninstall_libxml2( ) {
if [ ! -z " $installed_libxml2_version " ] ; then
echo "Uninstalling libxml2:"
cd libxml2-$installed_libxml2_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libxml2-$installed_libxml2_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libxml2-$installed_libxml2_version
rm -rf libxml2-$installed_libxml2_version .tar.gz
fi
installed_libxml2_version = ""
fi
}
install_lz4( ) {
if [ " $LZ4_VERSION " -a ! -f lz4-$LZ4_VERSION -done ] ; then
echo "Downloading, building, and installing lz4:"
2017-08-09 03:33:33 +00:00
#
# lz4 switched from sequentially numbered releases, named rN,
# to vX.Y.Z-numbered releases.
#
# The old sequentially-numbered releases were in tarballs
# at https://github.com/lz4/lz4/archive/rN.tar.gz, which
# extract into an lz4-rN directory.
#
# THe new vX.Y.Z-numbered releases are in tarballs at
# https://github.com/lz4/lz4/archive/vX.Y.Z.tar.gz, which
# extract into an lz4-X.Y.Z directory - no, not lz4-vX.Y.Z,
# just lz4-X.Y.Z.
#
# We expect LZ4_VERSION to be set to rN for the sequentially-
# numbered releases and X.Y.Z - not vX.Y.Z - for the vX.Y.Z-
# numbered releases. We also tell Curl to download the tarball
# with a name that corresponds to the name of the target
# directory, so that it begins with "lz4-" and ends with either
# "rN" or "X.Y.Z", to match what almost all of the other
# support libraries do.
#
if [ [ " $LZ4_VERSION " = = r* ] ]
then
[ -f lz4-$LZ4_VERSION .tar.gz ] || curl -L -o lz4-$LZ4_VERSION .tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION .tar.gz || exit 1
else
[ -f lz4-$LZ4_VERSION .tar.gz ] || curl -L -o lz4-$LZ4_VERSION .tar.gz https://github.com/lz4/lz4/archive/v$LZ4_VERSION .tar.gz || exit 1
fi
2017-06-16 07:37:58 +00:00
$no_build && echo "Skipping installation" && return
gzcat lz4-$LZ4_VERSION .tar.gz | tar xf - || exit 1
cd lz4-$LZ4_VERSION
2019-02-23 19:21:06 +00:00
#
# No configure script here, but it appears that if MOREFLAGS is
# set, that's added to CFLAGS, and those are combined with LDFLAGS
# and CXXFLAGS into FLAGS, which is used when building source
# files and libraries.
#
MOREFLAGS = " -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " make $MAKE_BUILD_OPTS || exit 1
2017-06-16 07:37:58 +00:00
$DO_MAKE_INSTALL || exit 1
cd ..
touch lz4-$LZ4_VERSION -done
fi
}
uninstall_lz4( ) {
if [ ! -z " $installed_lz4_version " ] ; then
echo "Uninstalling lz4:"
cd lz4-$installed_lz4_version
$DO_MAKE_UNINSTALL || exit 1
2017-06-26 21:46:47 +00:00
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# lz4's Makefile doesn't support "make distclean"; just do
# "make clean". Perhaps not using autotools means that
# there's no need for "make distclean".
2017-06-26 21:46:47 +00:00
#
# make distclean || exit 1
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
make clean || exit 1
2017-06-16 07:37:58 +00:00
cd ..
rm lz4-$installed_lz4_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
2017-08-07 19:13:56 +00:00
# "make install" apparently causes some stuff to be
# modified in the build tree, so, as it's done as
# root, that leaves stuff owned by root in the build
# tree. Therefore, we have to remove the build tree
# as root.
#
sudo rm -rf lz4-$installed_lz4_version
2017-06-16 07:37:58 +00:00
rm -rf lz4-$installed_lz4_version .tar.gz
fi
installed_lz4_version = ""
fi
}
install_sbc( ) {
if [ " $SBC_VERSION " -a ! -f sbc-$SBC_VERSION -done ] ; then
echo "Downloading, building, and installing sbc:"
[ -f sbc-$SBC_VERSION .tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat sbc-$SBC_VERSION .tar.gz | tar xf - || exit 1
cd sbc-$SBC_VERSION
2021-05-27 12:18:45 +00:00
if [ " $DARWIN_PROCESSOR_ARCH " = "arm" ] ; then
CFLAGS = " $CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS -U__ARM_NEON__ " CXXFLAGS = " $CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --disable-tools --disable-tester --disable-shared || exit 1
else
CFLAGS = " $CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --disable-tools --disable-tester --disable-shared || exit 1
fi
2017-06-16 07:37:58 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch sbc-$SBC_VERSION -done
fi
}
uninstall_sbc( ) {
if [ ! -z " $installed_sbc_version " ] ; then
echo "Uninstalling sbc:"
cd sbc-$installed_sbc_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm sbc-$installed_sbc_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf sbc-$installed_sbc_version
rm -rf sbc-$installed_sbc_version .tar.gz
fi
installed_sbc_version = ""
fi
}
2018-02-09 01:20:26 +00:00
install_maxminddb( ) {
if [ " $MAXMINDDB_VERSION " -a ! -f maxminddb-$MAXMINDDB_VERSION -done ] ; then
echo "Downloading, building, and installing MaxMindDB API:"
[ -f libmaxminddb-$MAXMINDDB_VERSION .tar.gz ] || curl -L -O https://github.com/maxmind/libmaxminddb/releases/download/$MAXMINDDB_VERSION /libmaxminddb-$MAXMINDDB_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2018-02-09 01:20:26 +00:00
gzcat libmaxminddb-$MAXMINDDB_VERSION .tar.gz | tar xf - || exit 1
cd libmaxminddb-$MAXMINDDB_VERSION
2015-01-22 02:09:30 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
2018-02-09 01:20:26 +00:00
touch maxminddb-$MAXMINDDB_VERSION -done
2015-01-22 02:09:30 +00:00
fi
2015-01-22 00:17:07 +00:00
}
2018-02-09 01:20:26 +00:00
uninstall_maxminddb( ) {
if [ ! -z " $installed_maxminddb_version " ] ; then
echo "Uninstalling MaxMindDB API:"
cd libmaxminddb-$installed_maxminddb_version
2015-01-22 02:09:30 +00:00
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
2018-02-09 01:20:26 +00:00
rm maxminddb-$installed_maxminddb_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
2018-02-09 01:20:26 +00:00
rm -rf libmaxminddb-$installed_maxminddb_version
rm -rf libmaxminddb-$installed_maxminddb_version .tar.gz
2015-01-22 08:30:47 +00:00
fi
2018-02-09 01:20:26 +00:00
installed_maxminddb_version = ""
2015-01-22 02:09:30 +00:00
fi
2015-01-22 00:17:07 +00:00
}
install_c_ares( ) {
2015-01-22 02:09:30 +00:00
if [ " $CARES_VERSION " -a ! -f c-ares-$CARES_VERSION -done ] ; then
echo "Downloading, building, and installing C-Ares API:"
2021-11-16 09:10:54 +00:00
[ -f c-ares-$CARES_VERSION .tar.gz ] || curl -L -O https://c-ares.org/download/c-ares-$CARES_VERSION .tar.gz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2015-01-22 02:09:30 +00:00
gzcat c-ares-$CARES_VERSION .tar.gz | tar xf - || exit 1
cd c-ares-$CARES_VERSION
2019-02-22 19:59:10 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2015-01-22 02:09:30 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch c-ares-$CARES_VERSION -done
fi
2015-01-22 00:17:07 +00:00
}
uninstall_c_ares( ) {
2015-01-22 02:09:30 +00:00
if [ ! -z " $installed_cares_version " ] ; then
echo "Uninstalling C-Ares API:"
cd c-ares-$installed_cares_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm c-ares-$installed_cares_version -done
2015-01-22 08:30:47 +00:00
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf c-ares-$installed_cares_version
rm -rf c-ares-$installed_cares_version .tar.gz
fi
2015-01-22 02:09:30 +00:00
installed_cares_version = ""
fi
2015-01-22 00:17:07 +00:00
}
2016-02-13 10:21:54 +00:00
install_libssh( ) {
if [ " $LIBSSH_VERSION " -a ! -f libssh-$LIBSSH_VERSION -done ] ; then
echo "Downloading, building, and installing libssh:"
2018-09-21 05:20:48 +00:00
LIBSSH_MAJOR_VERSION = " `expr $LIBSSH_VERSION : '\([0-9][0-9]*\).*'` "
LIBSSH_MINOR_VERSION = " `expr $LIBSSH_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'` "
LIBSSH_MAJOR_MINOR_VERSION = $LIBSSH_MAJOR_VERSION .$LIBSSH_MINOR_VERSION
[ -f libssh-$LIBSSH_VERSION .tar.xz ] || curl -L -O https://www.libssh.org/files/$LIBSSH_MAJOR_MINOR_VERSION /libssh-$LIBSSH_VERSION .tar.xz
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2016-02-13 10:21:54 +00:00
xzcat libssh-$LIBSSH_VERSION .tar.xz | tar xf - || exit 1
cd libssh-$LIBSSH_VERSION
mkdir build
cd build
2019-02-23 19:21:06 +00:00
MACOSX_DEPLOYMENT_TARGET = $min_osx_target SDKROOT = " $SDKPATH " cmake -DWITH_GCRYPT= 1 ../ || exit 1
2016-02-13 10:21:54 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch libssh-$LIBSSH_VERSION -done
fi
}
uninstall_libssh( ) {
if [ ! -z " $installed_libssh_version " ] ; then
2017-08-07 19:13:56 +00:00
echo "Uninstalling libssh:"
cd libssh-$installed_libssh_version
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# libssh uses cmake and doesn't support "make uninstall";
# just remove what we know it installs.
2017-08-07 19:13:56 +00:00
#
# $DO_MAKE_UNINSTALL || exit 1
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
$DO_RM -rf /usr/local/lib/libssh* \
/usr/local/include/libssh \
/usr/local/lib/pkgconfig/libssh* \
/usr/local/lib/cmake/libssh || exit 1
2017-08-07 19:13:56 +00:00
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# libssh uses cmake and doesn't support "make distclean";
# just remove the entire build directory.
2017-08-07 19:13:56 +00:00
#
# make distclean || exit 1
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
rm -rf build || exit 1
2017-08-07 19:13:56 +00:00
cd ..
rm libssh-$installed_libssh_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libssh-$installed_libssh_version
rm -rf libssh-$installed_libssh_version .tar.gz
fi
installed_libssh_version = ""
2016-02-13 10:21:54 +00:00
fi
}
2016-08-26 13:18:29 +00:00
install_nghttp2( ) {
if [ " $NGHTTP2_VERSION " -a ! -f nghttp2-$NGHTTP2_VERSION -done ] ; then
echo "Downloading, building, and installing nghttp2:"
[ -f nghttp2-$NGHTTP2_VERSION .tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION /nghttp2-$NGHTTP2_VERSION .tar.xz || exit 1
2017-04-19 15:40:02 +00:00
$no_build && echo "Skipping installation" && return
2016-08-26 13:18:29 +00:00
xzcat nghttp2-$NGHTTP2_VERSION .tar.xz | tar xf - || exit 1
cd nghttp2-$NGHTTP2_VERSION
2022-01-05 20:09:55 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure --enable-lib-only || exit 1
2016-08-26 13:18:29 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nghttp2-$NGHTTP2_VERSION -done
fi
}
uninstall_nghttp2( ) {
if [ ! -z " $installed_nghttp2_version " ] ; then
echo "Uninstalling nghttp2:"
cd nghttp2-$installed_nghttp2_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nghttp2-$installed_nghttp2_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nghttp2-$installed_nghttp2_version
rm -rf nghttp2-$installed_nghttp2_version .tar.xz
fi
installed_nghttp2_version = ""
fi
}
2017-08-01 23:36:01 +00:00
install_libtiff( ) {
if [ " $LIBTIFF_VERSION " -a ! -f tiff-$LIBTIFF_VERSION -done ] ; then
echo "Downloading, building, and installing libtiff:"
2022-04-20 19:59:29 +00:00
[ -f tiff-$LIBTIFF_VERSION .tar.gz ] ||
curl --fail -L -O https://download.osgeo.org/libtiff/tiff-$LIBTIFF_VERSION .tar.gz ||
curl --fail -L -O https://download.osgeo.org/libtiff/old/tiff-$LIBTIFF_VERSION .tar.gz ||
2022-01-31 18:53:25 +00:00
exit 1
2017-08-01 23:36:01 +00:00
$no_build && echo "Skipping installation" && return
gzcat tiff-$LIBTIFF_VERSION .tar.gz | tar xf - || exit 1
cd tiff-$LIBTIFF_VERSION
2019-02-22 20:25:46 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2017-08-01 23:36:01 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch tiff-$LIBTIFF_VERSION -done
fi
}
uninstall_libtiff( ) {
if [ ! -z " $installed_libtiff_version " ] ; then
echo "Uninstalling libtiff:"
cd tiff-$installed_libtiff_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm tiff-$installed_libtiff_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf tiff-$installed_libtiff_version
rm -rf tiff-$installed_libtiff_version .tar.gz
fi
installed_libtiff_version = ""
fi
}
install_spandsp( ) {
if [ " $SPANDSP_VERSION " -a ! -f spandsp-$SPANDSP_VERSION -done ] ; then
echo "Downloading, building, and installing SpanDSP:"
[ -f spandsp-$SPANDSP_VERSION .tar.gz ] || curl -L -O https://www.soft-switch.org/downloads/spandsp/spandsp-$SPANDSP_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat spandsp-$SPANDSP_VERSION .tar.gz | tar xf - || exit 1
cd spandsp-$SPANDSP_VERSION
2017-08-07 17:08:43 +00:00
#
# Don't use -Wunused-but-set-variable, as it's not supported
# by all the gcc versions in the versions of Xcode that we
# support.
#
2020-05-27 12:27:19 +00:00
patch -p0 <${ topdir } /macosx-support-lib-patches/spandsp-configure-patch || exit 1
2019-02-22 20:25:46 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2017-08-01 23:36:01 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch spandsp-$SPANDSP_VERSION -done
fi
}
uninstall_spandsp( ) {
if [ ! -z " $installed_spandsp_version " ] ; then
echo "Uninstalling SpanDSP:"
cd spandsp-$installed_spandsp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm spandsp-$installed_spandsp_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf spandsp-$installed_spandsp_version
rm -rf spandsp-$installed_spandsp_version .tar.gz
fi
installed_spandsp_version = ""
fi
}
2020-01-13 21:48:10 +00:00
install_speexdsp( ) {
if [ " $SPEEXDSP_VERSION " -a ! -f speexdsp-$SPEEXDSP_VERSION -done ] ; then
echo "Downloading, building, and installing SpeexDSP:"
2021-11-12 17:25:12 +00:00
[ -f speexdsp-$SPEEXDSP_VERSION .tar.gz ] || curl -L -O https://ftp.osuosl.org/pub/xiph/releases/speex/speexdsp-$SPEEXDSP_VERSION .tar.gz || exit 1
2020-01-13 21:48:10 +00:00
$no_build && echo "Skipping installation" && return
gzcat speexdsp-$SPEEXDSP_VERSION .tar.gz | tar xf - || exit 1
cd speexdsp-$SPEEXDSP_VERSION
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch speexdsp-$SPEEXDSP_VERSION -done
fi
}
uninstall_speexdsp( ) {
if [ ! -z " $installed_speexdsp_version " ] ; then
echo "Uninstalling SpeexDSP:"
cd speexdsp-$installed_speexdsp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm speexdsp-$installed_speexdsp_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf speexdsp-$installed_speexdsp_version
rm -rf speexdsp-$installed_speexdsp_version .tar.gz
fi
installed_speexdsp_version = ""
fi
}
2017-08-02 00:04:15 +00:00
install_bcg729( ) {
if [ " $BCG729_VERSION " -a ! -f bcg729-$BCG729_VERSION -done ] ; then
echo "Downloading, building, and installing bcg729:"
2021-11-12 17:25:12 +00:00
[ -f bcg729-$BCG729_VERSION .tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/linphone/plugins/sources/bcg729-$BCG729_VERSION .tar.gz || exit 1
2017-08-02 00:04:15 +00:00
$no_build && echo "Skipping installation" && return
gzcat bcg729-$BCG729_VERSION .tar.gz | tar xf - || exit 1
cd bcg729-$BCG729_VERSION
2019-02-22 20:25:46 +00:00
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
2017-08-02 00:04:15 +00:00
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch bcg729-$BCG729_VERSION -done
fi
}
uninstall_bcg729( ) {
if [ ! -z " $installed_bcg729_version " ] ; then
echo "Uninstalling bcg729:"
cd bcg729-$installed_bcg729_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm bcg729-$installed_bcg729_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf bcg729-$installed_bcg729_version
rm -rf bcg729-$installed_bcg729_version .tar.gz
fi
installed_bcg729_version = ""
fi
}
2020-06-01 22:21:57 +00:00
install_ilbc( ) {
if [ -n " $ILBC_VERSION " ] && [ ! -f ilbc-$ILBC_VERSION -done ] ; then
echo "Downloading, building, and installing iLBC:"
[ -f libilbc-$ILBC_VERSION .tar.bz ] || curl --location --remote-name https://github.com/TimothyGu/libilbc/releases/download/v$ILBC_VERSION /libilbc-$ILBC_VERSION .tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat libilbc-$ILBC_VERSION .tar.bz2 | tar xf - || exit 1
cd libilbc-$ILBC_VERSION || exit 1
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch ilbc-$ILBC_VERSION -done
fi
}
uninstall_ilbc( ) {
if [ -n " $installed_ilbc_version " ] ; then
echo "Uninstalling iLBC:"
cd " libilbc- $installed_ilbc_version " || exit 1
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm " ilbc- $installed_ilbc_version -done "
if [ " $# " -eq 1 ] && [ " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf " libilbc- $installed_ilbc_version "
rm -rf " libilbc- $installed_ilbc_version .tar.bz2 "
fi
installed_ilbc_version = ""
fi
}
2020-09-29 04:33:06 +00:00
install_opus( ) {
if [ " $OPUS_VERSION " -a ! -f opus-$OPUS_VERSION -done ] ; then
echo "Downloading, building, and installing opus:"
[ -f opus-$OPUS_VERSION .tar.gz ] || curl -L -O https://archive.mozilla.org/pub/opus/opus-$OPUS_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat opus-$OPUS_VERSION .tar.gz | tar xf - || exit 1
cd opus-$OPUS_VERSION
CFLAGS = " $CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch opus-$OPUS_VERSION -done
fi
}
uninstall_opus( ) {
if [ ! -z " $installed_opus_version " ] ; then
echo "Uninstalling opus:"
cd opus-$installed_opus_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm opus-$installed_opus_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf opus-$installed_opus_version
rm -rf opus-$installed_opus_version .tar.gz
fi
installed_opus_version = ""
fi
}
2018-10-13 13:56:02 +00:00
install_python3( ) {
2021-04-03 12:50:17 +00:00
# The macos11 installer can be deployed to older versions, down to
2021-01-03 18:09:34 +00:00
# 10.9 (Mavericks), but is still considered experimental so continue
# to use the 64-bit installer (10.9) on earlier releases for now.
local macver = x10.9
if [ [ $DARWIN_MAJOR_VERSION -gt 19 ] ] ; then
2021-04-03 12:50:17 +00:00
# The macos11 installer is required for Arm-based Macs, which require
# macOS 11 Big Sur. Note that the package name is "11.0" (no x) for
# 3.9.1 but simply "11" for 3.9.2 (and later)
if [ [ $PYTHON3_VERSION = 3.9.1 ] ] ; then
macver = 11.0
else
macver = 11
fi
2018-11-08 16:39:53 +00:00
fi
2018-10-13 13:56:02 +00:00
if [ " $PYTHON3_VERSION " -a ! -f python3-$PYTHON3_VERSION -done ] ; then
echo "Downloading and installing python3:"
2021-01-03 18:09:34 +00:00
[ -f python-$PYTHON3_VERSION -macos$macver .pkg ] || curl -L -O https://www.python.org/ftp/python/$PYTHON3_VERSION /python-$PYTHON3_VERSION -macos$macver .pkg || exit 1
2018-10-13 13:56:02 +00:00
$no_build && echo "Skipping installation" && return
2021-01-03 18:09:34 +00:00
sudo installer -target / -pkg python-$PYTHON3_VERSION -macos$macver .pkg || exit 1
2018-10-13 13:56:02 +00:00
touch python3-$PYTHON3_VERSION -done
2021-07-30 10:45:41 +00:00
#
# On macOS, the pip3 installed from Python packages appears to
# install scripts /Library/Frameworks/Python.framework/Versions/M.N/bin,
# where M.N is the major and minor version of Python (the dot-dot
# release is irrelevant).
#
# Strip off any dot-dot component in $PYTHON3_VERSION.
#
python_version = ` echo $PYTHON3_VERSION | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/' `
#
# Now treat Meson as being in the directory in question.
#
MESON = " /Library/Frameworks/Python.framework/Versions/ $python_version /bin/meson "
else
#
# We're using the Python 3 that's in /usr/bin, the pip3 for
# which installs scripts in /usr/local/bin, so, when we
# install Meson, look for it there.
#
MESON = /usr/local/bin/meson
2018-10-13 13:56:02 +00:00
fi
}
uninstall_python3( ) {
# Major version (e.g. "3.7")
local PYTHON_VERSION = ${ installed_python3_version %.* }
if [ ! -z " $installed_python3_version " ] ; then
echo "Uninstalling python3:"
frameworkdir = " /Library/Frameworks/Python.framework/Versions/ $PYTHON_VERSION "
sudo rm -rf " $frameworkdir "
sudo rm -rf " /Applications/Python $PYTHON_VERSION "
sudo find /usr/local/bin -maxdepth 1 -lname " * $frameworkdir /bin/* " -delete
# Remove three symlinks and empty directories. Removing directories
# might fail if for some reason multiple versions are installed.
sudo rm /Library/Frameworks/Python.framework/Headers
sudo rm /Library/Frameworks/Python.framework/Python
sudo rm /Library/Frameworks/Python.framework/Resources
sudo rmdir /Library/Frameworks/Python.framework/Versions
sudo rmdir /Library/Frameworks/Python.framework
sudo pkgutil --forget org.python.Python.PythonApplications-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonDocumentation-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonFramework-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonUnixTools-$PYTHON_VERSION
rm python3-$installed_python3_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
2021-04-03 12:50:17 +00:00
rm -f python-$installed_python3_version -macos11.pkg
2021-01-03 18:09:34 +00:00
rm -f python-$installed_python3_version -macos11.0.pkg
2018-10-13 13:56:02 +00:00
rm -f python-$installed_python3_version -macosx10.9.pkg
2018-11-08 16:39:53 +00:00
rm -f python-$installed_python3_version -macosx10.6.pkg
2018-10-13 13:56:02 +00:00
fi
installed_python3_version = ""
fi
}
2019-04-10 10:52:52 +00:00
install_brotli( ) {
if [ " $BROTLI_VERSION " -a ! -f brotli-$BROTLI_VERSION -done ] ; then
echo "Downloading, building, and installing brotli:"
[ -f brotli-$BROTLI_VERSION .tar.gz ] || curl -L -o brotli-$BROTLI_VERSION .tar.gz https://github.com/google/brotli/archive/v$BROTLI_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat brotli-$BROTLI_VERSION .tar.gz | tar xf - || exit 1
cd brotli-$BROTLI_VERSION
mkdir build_dir
cd build_dir
MACOSX_DEPLOYMENT_TARGET = $min_osx_target SDKROOT = " $SDKPATH " cmake ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch brotli-$BROTLI_VERSION -done
fi
}
uninstall_brotli( ) {
if [ ! -z " $installed_brotli_version " ] ; then
echo "Uninstalling brotli:"
cd brotli-$installed_brotli_version
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# brotli uses cmake on macOS and doesn't support "make uninstall";
# just remove what we know it installs.
2019-04-10 10:52:52 +00:00
#
# $DO_MAKE_UNINSTALL || exit 1
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
$DO_RM -rf /usr/local/bin/brotli \
/usr/local/lib/libbrotli* \
/usr/local/include/brotli \
/usr/local/lib/pkgconfig/libbrotli* || exit 1
2019-04-10 10:52:52 +00:00
#
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
# brotli uses cmake on macOS and doesn't support "make distclean";
# just remove the enire build directory.
2019-04-10 10:52:52 +00:00
#
# make distclean || exit 1
macos-setup: more cleanups.
Fix/update/expand some comments.
Do uninstalls for dependencies using CMake more similarly.
For LZ4, as it comes with a Makefile rather than any
autotools/CMake/etc. configuration, "make distclean" might not be
necessary, so, as it's not supported, just do "make clean".
For libssh, do all removes in the uninstall in a single command, and use
$DO_RM, so that it uses sudo iff /usr/local isn't writable by us. In
addition, remove the build directory as the equivalent of "make
distclean".
As with libssh, so with brotli.
2020-12-13 08:44:24 +00:00
rm -rf build_dir || exit 1
2019-04-10 10:52:52 +00:00
cd ..
rm brotli-$installed_brotli_version -done
if [ " $# " -eq 1 -a " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf brotli-$installed_brotli_version
rm -rf brotli-$installed_brotli_version .tar.gz
fi
installed_brotli_version = ""
fi
}
2019-09-17 16:31:39 +00:00
install_minizip( ) {
if [ " $ZLIB_VERSION " ] && [ ! -f minizip-$ZLIB_VERSION -done ] ; then
echo "Downloading, building, and installing zlib for minizip:"
[ -f zlib-$ZLIB_VERSION .tar.gz ] || curl -L -o zlib-$ZLIB_VERSION .tar.gz https://zlib.net/zlib-$ZLIB_VERSION .tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat zlib-$ZLIB_VERSION .tar.gz | tar xf - || exit 1
2020-12-19 07:53:47 +00:00
#
# minizip ships both with a minimal Makefile that doesn't
# support "make install", "make uninstall", or "make distclean",
# and with a Makefile.am file that, if we do an autoreconf,
# gives us a configure script, and a Makefile.in that, if we run
# the configure script, gives us a Makefile that supports ll of
# those targets, and that installs a pkg-config .pc file for
# minizip.
#
# So that's what we do.
#
2019-09-17 16:31:39 +00:00
cd zlib-$ZLIB_VERSION /contrib/minizip || exit 1
LIBTOOLIZE = glibtoolize autoreconf --force --install
CFLAGS = " $CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " CXXFLAGS = " $CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS " LDFLAGS = " $LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS " ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../../..
touch minizip-$ZLIB_VERSION -done
fi
}
uninstall_minizip( ) {
if [ -n " $installed_minizip_version " ] ; then
echo "Uninstalling minizip:"
cd zlib-$installed_minizip_version /contrib/minizip
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ../../..
2020-12-19 07:45:28 +00:00
rm minizip-$installed_minizip_version -done
2019-09-17 16:31:39 +00:00
if [ " $# " -eq 1 ] && [ " $1 " = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf zlib-$installed_minizip_version
rm -rf zlib-$installed_minizip_version .tar.gz
fi
installed_minizip_version = ""
fi
}
2019-11-14 16:08:28 +00:00
install_sparkle( ) {
if [ " $SPARKLE_VERSION " ] && [ ! -f sparkle-$SPARKLE_VERSION -done ] ; then
echo "Downloading and installing Sparkle:"
#
# Download the tarball and unpack it in /usr/local/Sparkle-x.y.z
#
2021-05-28 23:40:00 +00:00
[ -f Sparkle-$SPARKLE_VERSION .tar.xz ] || curl -L -o Sparkle-$SPARKLE_VERSION .tar.xz https://github.com/sparkle-project/Sparkle/releases/download/$SPARKLE_VERSION /Sparkle-$SPARKLE_VERSION .tar.xz || exit 1
2019-11-14 16:08:28 +00:00
$no_build && echo "Skipping installation" && return
2019-11-17 21:47:22 +00:00
test -d " /usr/local/Sparkle- $SPARKLE_VERSION " || sudo mkdir " /usr/local/Sparkle- $SPARKLE_VERSION "
2021-05-28 23:40:00 +00:00
sudo tar -C " /usr/local/Sparkle- $SPARKLE_VERSION " -xpof Sparkle-$SPARKLE_VERSION .tar.xz
2019-11-14 16:08:28 +00:00
touch sparkle-$SPARKLE_VERSION -done
fi
}
uninstall_sparkle( ) {
if [ -n " $installed_sparkle_version " ] ; then
echo "Uninstalling Sparkle:"
sudo rm -rf " /usr/local/Sparkle- $installed_sparkle_version "
if [ " $# " -eq 1 ] && [ " $1 " = "-r" ] ; then
2021-05-28 23:40:00 +00:00
rm -f " Sparkle- $installed_sparkle_version .tar.xz "
2019-11-14 16:08:28 +00:00
fi
installed_sparkle_version = ""
fi
}
2015-01-22 00:27:09 +00:00
install_all( ) {
2015-01-22 08:30:47 +00:00
#
# Check whether the versions we have installed are the versions
# requested; if not, uninstall the installed versions.
#
2019-04-10 10:52:52 +00:00
if [ ! -z " $installed_brotli_version " -a \
" $installed_brotli_version " != " $BROTLI_VERSION " ] ; then
echo " Installed brotli version is $installed_brotli_version "
if [ -z " $BROTLI_VERSION " ] ; then
echo "brotli is not requested"
else
echo " Requested brotli version is $BROTLI_VERSION "
fi
uninstall_brotli -r
fi
2018-10-13 13:56:02 +00:00
if [ ! -z " $installed_python3_version " -a \
" $installed_python3_version " != " $PYTHON3_VERSION " ] ; then
echo " Installed python3 version is $installed_python3_version "
if [ -z " $PYTHON3_VERSION " ] ; then
echo "python3 is not requested"
else
echo " Requested python3 version is $PYTHON3_VERSION "
fi
uninstall_python3 -r
fi
2017-08-02 00:04:15 +00:00
if [ ! -z " $installed_bcg729_version " -a \
" $installed_bcg729_version " != " $BCG729_VERSION " ] ; then
2020-01-13 21:48:10 +00:00
echo " Installed bcg729 version is $installed_bcg729_version "
2017-08-02 00:04:15 +00:00
if [ -z " $BCG729_VERSION " ] ; then
echo "bcg729 is not requested"
else
echo " Requested bcg729 version is $BCG729_VERSION "
fi
uninstall_bcg729 -r
fi
2020-06-01 22:21:57 +00:00
if [ -n " $installed_ilbc_version " ] \
&& [ " $installed_ilbc_version " != " $ILBC_VERSION " ] ; then
echo " Installed iLBC version is $installed_ilbc_version "
if [ -z " $ILBC_VERSION " ] ; then
echo "iLBC is not requested"
else
echo " Requested iLBC version is $ILBC_VERSION "
fi
uninstall_ilbc -r
fi
2020-09-29 04:33:06 +00:00
if [ -n " $installed_opus_version " ] \
&& [ " $installed_opus_version " != " $OPUS_VERSION " ] ; then
echo " Installed opus version is $installed_opus_version "
if [ -z " $OPUS_VERSION " ] ; then
echo "opus is not requested"
else
echo " Requested opus version is $OPUS_VERSION "
fi
uninstall_opus -r
fi
2017-08-01 23:36:01 +00:00
if [ ! -z " $installed_spandsp_version " -a \
" $installed_spandsp_version " != " $SPANDSP_VERSION " ] ; then
echo " Installed SpanDSP version is $installed_spandsp_version "
if [ -z " $SPANDSP_VERSION " ] ; then
echo "spandsp is not requested"
else
echo " Requested SpanDSP version is $SPANDSP_VERSION "
fi
uninstall_spandsp -r
fi
2020-01-13 21:48:10 +00:00
if [ ! -z " $installed_speexdsp_version " -a \
" $installed_speexdsp_version " != " $SPEEXDSP_VERSION " ] ; then
echo " Installed SpeexDSP version is $installed_speexdsp_version "
if [ -z " $SPEEXDSP_VERSION " ] ; then
echo "speexdsp is not requested"
else
echo " Requested SpeexDSP version is $SPEEXDSP_VERSION "
fi
uninstall_speexdsp -r
fi
2017-08-01 23:36:01 +00:00
if [ ! -z " $installed_libtiff_version " -a \
" $installed_libtiff_version " != " $LIBTIFF_VERSION " ] ; then
echo " Installed libtiff version is $installed_libtiff_version "
if [ -z " $LIBTIFF_VERSION " ] ; then
echo "libtiff is not requested"
else
echo " Requested libtiff version is $LIBTIFF_VERSION "
fi
uninstall_libtiff -r
fi
2016-08-26 13:18:29 +00:00
if [ ! -z " $installed_nghttp2_version " -a \
" $installed_nghttp2_version " != " $NGHTTP2_VERSION " ] ; then
2016-10-17 13:47:04 +00:00
echo " Installed nghttp2 version is $installed_nghttp2_version "
2016-08-26 13:18:29 +00:00
if [ -z " $NGHTTP2_VERSION " ] ; then
echo "nghttp2 is not requested"
else
echo " Requested nghttp2 version is $NGHTTP2_VERSION "
fi
uninstall_nghttp2 -r
fi
2016-02-13 10:21:54 +00:00
if [ ! -z " $installed_libssh_version " -a \
" $installed_libssh_version " != " $LIBSSH_VERSION " ] ; then
echo " Installed libssh version is $installed_libssh_version "
if [ -z " $LIBSSH_VERSION " ] ; then
echo "libssh is not requested"
else
echo " Requested libssh version is $LIBSSH_VERSION "
fi
uninstall_libssh -r
fi
2015-01-22 08:30:47 +00:00
if [ ! -z " $installed_cares_version " -a \
" $installed_cares_version " != " $CARES_VERSION " ] ; then
echo " Installed C-Ares version is $installed_cares_version "
if [ -z " $CARES_VERSION " ] ; then
echo "C-Ares is not requested"
else
echo " Requested C-Ares version is $CARES_VERSION "
fi
uninstall_c_ares -r
fi
2018-02-09 01:20:26 +00:00
if [ ! -z " $installed_maxminddb_version " -a \
" $installed_maxminddb_version " != " $MAXMINDDB_VERSION " ] ; then
echo " Installed MaxMindDB API version is $installed_maxminddb_version "
if [ -z " $MAXMINDDB_VERSION " ] ; then
echo "MaxMindDB is not requested"
2015-01-22 08:30:47 +00:00
else
2018-02-09 01:20:26 +00:00
echo " Requested MaxMindDB version is $MAXMINDDB_VERSION "
2015-01-22 08:30:47 +00:00
fi
2018-02-09 01:20:26 +00:00
uninstall_maxminddb -r
2015-01-22 08:30:47 +00:00
fi
2017-06-16 07:37:58 +00:00
if [ ! -z " $installed_sbc_version " -a \
" $installed_sbc_version " != " $SBC_VERSION " ] ; then
echo " Installed SBC version is $installed_sbc_version "
if [ -z " $SBC_VERSION " ] ; then
echo "SBC is not requested"
else
echo " Requested SBC version is $SBC_VERSION "
fi
uninstall_sbc -r
fi
2016-11-02 00:47:00 +00:00
if [ ! -z " $installed_lz4_version " -a \
" $installed_lz4_version " != " $LZ4_VERSION " ] ; then
echo " Installed LZ4 version is $installed_lz4_version "
if [ -z " $LZ4_VERSION " ] ; then
echo "LZ4 is not requested"
else
echo " Requested LZ4 version is $LZ4_VERSION "
fi
uninstall_lz4 -r
fi
2017-04-04 21:23:59 +00:00
if [ ! -z " $installed_libxml2_version " -a \
" $installed_libxml2_version " != " $LIBXML2_VERSION " ] ; then
echo " Installed libxml2 version is $installed_libxml2_version "
if [ -z " $LIBXML2_VERSION " ] ; then
echo "libxml2 is not requested"
else
echo " Requested libxml2 version is $LIBXML2_VERSION "
fi
uninstall_libxml2 -r
fi
2017-06-16 07:37:58 +00:00
if [ ! -z " $installed_snappy_version " -a \
" $installed_snappy_version " != " $SNAPPY_VERSION " ] ; then
echo " Installed SNAPPY version is $installed_snappy_version "
if [ -z " $SNAPPY_VERSION " ] ; then
echo "SNAPPY is not requested"
2016-10-20 08:36:36 +00:00
else
2017-06-16 07:37:58 +00:00
echo " Requested SNAPPY version is $SNAPPY_VERSION "
2016-10-20 08:36:36 +00:00
fi
2017-06-16 07:37:58 +00:00
uninstall_snappy -r
2016-10-20 08:36:36 +00:00
fi
2015-01-22 08:30:47 +00:00
if [ ! -z " $installed_lua_version " -a \
" $installed_lua_version " != " $LUA_VERSION " ] ; then
echo " Installed Lua version is $installed_lua_version "
if [ -z " $LUA_VERSION " ] ; then
echo "Lua is not requested"
else
echo " Requested Lua version is $LUA_VERSION "
fi
uninstall_lua -r
fi
if [ ! -z " $installed_gnutls_version " -a \
" $installed_gnutls_version " != " $GNUTLS_VERSION " ] ; then
echo " Installed GnuTLS version is $installed_gnutls_version "
if [ -z " $GNUTLS_VERSION " ] ; then
echo "GnuTLS is not requested"
else
echo " Requested GnuTLS version is $GNUTLS_VERSION "
fi
uninstall_gnutls -r
fi
2017-06-16 07:19:53 +00:00
if [ ! -z " $installed_nettle_version " -a \
" $installed_nettle_version " != " $NETTLE_VERSION " ] ; then
echo " Installed Nettle version is $installed_nettle_version "
if [ -z " $NETTLE_VERSION " ] ; then
echo "Nettle is not requested"
else
echo " Requested Nettle version is $NETTLE_VERSION "
fi
uninstall_nettle -r
fi
if [ ! -z " $installed_gmp_version " -a \
" $installed_gmp_version " != " $GMP_VERSION " ] ; then
echo " Installed GMP version is $installed_gmp_version "
if [ -z " $GMP_VERSION " ] ; then
echo "GMP is not requested"
else
echo " Requested GMP version is $GMP_VERSION "
fi
uninstall_gmp -r
fi
2020-11-26 06:10:34 +00:00
if [ ! -z " $installed_p11_kit_version " -a \
" $installed_p11_kit_version " != " $P11KIT_VERSION " ] ; then
echo " Installed p11-kit version is $installed_p11_kit_version "
if [ -z " $P11KIT_VERSION " ] ; then
echo "p11-kit is not requested"
else
echo " Requested p11-kit version is $P11KIT_VERSION "
fi
uninstall_p11_kit -r
fi
if [ ! -z " $installed_libtasn1_version " -a \
" $installed_libtasn1_version " != " $LIBTASN1_VERSION " ] ; then
echo " Installed libtasn1 version is $installed_libtasn1_version "
if [ -z " $LIBTASN1_VERSION " ] ; then
echo "libtasn1 is not requested"
else
echo " Requested libtasn1 version is $LIBTASN1_VERSION "
fi
uninstall_libtasn1 -r
fi
2015-01-22 08:30:47 +00:00
if [ ! -z " $installed_libgcrypt_version " -a \
" $installed_libgcrypt_version " != " $LIBGCRYPT_VERSION " ] ; then
echo " Installed libgcrypt version is $installed_libgcrypt_version "
if [ -z " $LIBGCRYPT_VERSION " ] ; then
echo "libgcrypt is not requested"
else
echo " Requested libgcrypt version is $LIBGCRYPT_VERSION "
fi
uninstall_libgcrypt -r
fi
if [ ! -z " $installed_libgpg_error_version " -a \
" $installed_libgpg_error_version " != " $LIBGPG_ERROR_VERSION " ] ; then
echo " Installed libgpg-error version is $installed_libgpg_error_version "
if [ -z " $LIBGPG_ERROR_VERSION " ] ; then
echo "libgpg-error is not requested"
else
echo " Requested libgpg-error version is $LIBGPG_ERROR_VERSION "
fi
uninstall_libgpg_error -r
fi
if [ ! -z " $installed_libsmi_version " -a \
" $installed_libsmi_version " != " $LIBSMI_VERSION " ] ; then
echo " Installed libsmi version is $installed_libsmi_version "
if [ -z " $LIBSMI_VERSION " ] ; then
echo "libsmi is not requested"
else
echo " Requested libsmi version is $LIBSMI_VERSION "
fi
uninstall_libsmi -r
fi
if [ ! -z " $installed_qt_version " -a \
" $installed_qt_version " != " $QT_VERSION " ] ; then
echo " Installed Qt version is $installed_qt_version "
if [ -z " $QT_VERSION " ] ; then
echo "Qt is not requested"
else
echo " Requested Qt version is $QT_VERSION "
fi
uninstall_qt -r
fi
if [ ! -z " $installed_glib_version " -a \
" $installed_glib_version " != " $GLIB_VERSION " ] ; then
echo " Installed GLib version is $installed_glib_version "
if [ -z " $GLIB_VERSION " ] ; then
echo "GLib is not requested"
else
echo " Requested GLib version is $GLIB_VERSION "
fi
uninstall_glib -r
fi
if [ ! -z " $installed_pkg_config_version " -a \
" $installed_pkg_config_version " != " $PKG_CONFIG_VERSION " ] ; then
echo " Installed pkg-config version is $installed_pkg_config_version "
if [ -z " $PKG_CONFIG_VERSION " ] ; then
echo "pkg-config is not requested"
else
echo " Requested pkg-config version is $PKG_CONFIG_VERSION "
fi
uninstall_pkg_config -r
fi
if [ ! -z " $installed_gettext_version " -a \
" $installed_gettext_version " != " $GETTEXT_VERSION " ] ; then
echo " Installed GNU gettext version is $installed_gettext_version "
if [ -z " $GETTEXT_VERSION " ] ; then
echo "GNU gettext is not requested"
else
echo " Requested GNU gettext version is $GETTEXT_VERSION "
fi
uninstall_gettext -r
fi
2018-05-15 03:42:32 +00:00
if [ ! -z " $installed_ninja_version " -a \
" $installed_ninja_version " != " $NINJA_VERSION " ] ; then
echo " Installed Ninja version is $installed_ninja_version "
if [ -z " $NINJA_VERSION " ] ; then
echo "Ninja is not requested"
else
echo " Requested Ninja version is $NINJA_VERSION "
fi
uninstall_ninja -r
fi
2018-02-26 23:11:51 +00:00
if [ ! -z " $installed_asciidoctorpdf_version " -a \
" $installed_asciidoctorpdf_version " != " $ASCIIDOCTORPDF_VERSION " ] ; then
echo " Installed Asciidoctor-pdf version is $installed_asciidoctorpdf_version "
if [ -z " $ASCIIDOCTORPDF_VERSION " ] ; then
echo "Asciidoctor-pdf is not requested"
else
echo " Requested Asciidoctor-pdf version is $ASCIIDOCTORPDF_VERSION "
fi
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctorpdf -r
fi
if [ ! -z " $installed_asciidoctor_version " -a \
" $installed_asciidoctor_version " != " $ASCIIDOCTOR_VERSION " ] ; then
echo " Installed Asciidoctor version is $installed_asciidoctor_version "
if [ -z " $ASCIIDOCTOR_VERSION " ] ; then
echo "Asciidoctor is not requested"
else
echo " Requested Asciidoctor version is $ASCIIDOCTOR_VERSION "
fi
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctor -r
fi
2015-01-22 08:30:47 +00:00
if [ ! -z " $installed_cmake_version " -a \
" $installed_cmake_version " != " $CMAKE_VERSION " ] ; then
echo " Installed CMake version is $installed_cmake_version "
if [ -z " $CMAKE_VERSION " ] ; then
echo "CMake is not requested"
else
echo " Requested CMake version is $CMAKE_VERSION "
fi
uninstall_cmake -r
fi
if [ ! -z " $installed_libtool_version " -a \
" $installed_libtool_version " != " $LIBTOOL_VERSION " ] ; then
echo " Installed GNU libtool version is $installed_libtool_version "
if [ -z " $LIBTOOL_VERSION " ] ; then
echo "GNU libtool is not requested"
else
echo " Requested GNU libtool version is $LIBTOOL_VERSION "
fi
uninstall_libtool -r
fi
if [ ! -z " $installed_automake_version " -a \
" $installed_automake_version " != " $AUTOMAKE_VERSION " ] ; then
echo " Installed GNU automake version is $installed_automake_version "
if [ -z " $AUTOMAKE_VERSION " ] ; then
echo "GNU automake is not requested"
else
echo " Requested GNU automake version is $AUTOMAKE_VERSION "
fi
uninstall_automake -r
fi
if [ ! -z " $installed_autoconf_version " -a \
" $installed_autoconf_version " != " $AUTOCONF_VERSION " ] ; then
echo " Installed GNU autoconf version is $installed_autoconf_version "
if [ -z " $AUTOCONF_VERSION " ] ; then
echo "GNU autoconf is not requested"
else
echo " Requested GNU autoconf version is $AUTOCONF_VERSION "
fi
uninstall_autoconf -r
fi
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
if [ ! -z " $installed_pcre_version " -a \
" $installed_pcre_version " != " $PCRE_VERSION " ] ; then
echo " Installed pcre version is $installed_pcre_version "
if [ -z " $PCRE_VERSION " ] ; then
echo "pcre is not requested"
else
echo " Requested pcre version is $PCRE_VERSION "
fi
uninstall_pcre -r
fi
2021-11-12 20:23:16 +00:00
if [ -n " $installed_pcre2_version " -a \
" $installed_pcre2_version " != " $PCRE2_VERSION " ] ; then
echo " Installed pcre2 version is $installed_pcre2_version "
if [ -z " $PCRE2_VERSION " ] ; then
echo "pcre2 is not requested"
else
echo " Requested pcre2 version is $PCRE2_VERSION "
fi
uninstall_pcre2 -r
fi
2017-06-16 07:19:53 +00:00
if [ ! -z " $installed_lzip_version " -a \
" $installed_lzip_version " != " $LZIP_VERSION " ] ; then
echo " Installed lzip version is $installed_lzip_version "
if [ -z " $LZIP_VERSION " ] ; then
echo "lzip is not requested"
else
echo " Requested lzip version is $LZIP_VERSION "
fi
uninstall_lzip -r
fi
2015-01-22 08:30:47 +00:00
if [ ! -z " $installed_xz_version " -a \
" $installed_xz_version " != " $XZ_VERSION " ] ; then
echo " Installed xz version is $installed_xz_version "
if [ -z " $XZ_VERSION " ] ; then
echo "xz is not requested"
else
echo " Requested xz version is $XZ_VERSION "
fi
uninstall_xz -r
fi
2018-05-19 00:29:25 +00:00
if [ ! -z " $installed_curl_version " -a \
" $installed_curl_version " != " $CURL_VERSION " ] ; then
echo " Installed curl version is $installed_curl_version "
if [ -z " $CURL_VERSION " ] ; then
echo "curl is not requested"
else
echo " Requested curl version is $CURL_VERSION "
fi
uninstall_curl -r
fi
2019-09-17 16:31:39 +00:00
if [ ! -z " $installed_minizip_version " -a \
" $installed_minizip_version " != " $ZLIB_VERSION " ] ; then
echo " Installed minizip (zlib) version is $installed_minizip_version "
if [ -z " $ZLIB_VERSION " ] ; then
echo "minizip is not requested"
else
echo " Requested minizip (zlib) version is $ZLIB_VERSION "
fi
uninstall_minizip -r
fi
2019-11-14 16:08:28 +00:00
if [ ! -z " $installed_sparkle_version " -a \
" $installed_sparkle_version " != " $SPARKLE_VERSION " ] ; then
echo " Installed Sparkle version is $installed_sparkle_version "
if [ -z " $SPARKLE_VERSION " ] ; then
echo "Sparkle is not requested"
else
echo " Requested Sparkle version is $SPARKLE_VERSION "
fi
uninstall_sparkle -r
fi
2018-05-19 00:29:25 +00:00
#
# Start with curl: we may need it to download and install xz.
2015-01-22 00:27:09 +00:00
#
2018-05-19 00:29:25 +00:00
install_curl
#
# Now intall xz: it is the sole download format of glib later than 2.31.2.
2015-01-22 00:27:09 +00:00
#
2015-01-22 02:09:30 +00:00
install_xz
2015-01-22 00:27:09 +00:00
2017-06-16 07:19:53 +00:00
install_lzip
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
install_pcre
2015-01-22 02:09:30 +00:00
install_autoconf
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_automake
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_libtool
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_cmake
2015-01-22 00:27:09 +00:00
2021-11-14 19:57:29 +00:00
install_pcre2
2021-07-29 21:06:58 +00:00
#
# Install Python 3 now; not only is it needed for the Wireshark
# build process, it's also needed for the Meson build system,
# which newer versions of GLib use as their build system.
#
install_python3
#
# Now install Meson.
#
install_meson
2018-05-15 03:42:32 +00:00
install_ninja
2018-02-26 23:11:51 +00:00
install_asciidoctor
install_asciidoctorpdf
2015-01-22 00:27:09 +00:00
#
2017-04-05 17:50:53 +00:00
# Start with GNU gettext; GLib requires it, and macOS doesn't have it
2015-01-22 00:27:09 +00:00
# or a BSD-licensed replacement.
#
# At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
# by default, which causes, for example, stpncpy to be defined as
# a hairy macro that collides with the GNU gettext configure script's
# attempts to workaround AIX's lack of a declaration for stpncpy,
# with the result being a huge train wreck. Define _FORTIFY_SOURCE
# as 0 in an attempt to keep the trains on separate tracks.
#
2015-01-22 02:09:30 +00:00
install_gettext
2015-01-22 00:27:09 +00:00
#
# GLib depends on pkg-config.
# By default, pkg-config depends on GLib; we break the dependency cycle
# by configuring pkg-config to use its own internal version of GLib.
#
2015-01-22 02:09:30 +00:00
install_pkg_config
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_glib
2015-01-22 00:27:09 +00:00
#
# Now we have reached a point where we can build everything but
# the GUI (Wireshark).
#
2015-01-22 02:09:30 +00:00
install_qt
2015-01-22 00:27:09 +00:00
#
# Now we have reached a point where we can build everything including
# the GUI (Wireshark), but not with any optional features such as
# SNMP OID resolution, some forms of decryption, Lua scripting, playback
2018-02-09 01:20:26 +00:00
# of audio, or MaxMindDB mapping of IP addresses.
2015-01-22 00:27:09 +00:00
#
# We now conditionally download optional libraries to support them;
# the default is to download them all.
#
2015-01-22 02:09:30 +00:00
install_libsmi
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_libgpg_error
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_libgcrypt
2015-01-22 00:27:09 +00:00
2017-06-16 07:19:53 +00:00
install_gmp
2020-11-26 06:10:34 +00:00
install_libtasn1
install_p11_kit
2017-06-16 07:19:53 +00:00
install_nettle
2015-01-22 02:09:30 +00:00
install_gnutls
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_lua
2015-01-22 00:27:09 +00:00
2016-11-02 05:56:30 +00:00
install_snappy
2019-08-12 21:57:45 +00:00
install_zstd
2017-04-04 21:23:59 +00:00
install_libxml2
2016-11-02 00:47:00 +00:00
install_lz4
2016-10-20 08:36:36 +00:00
install_sbc
2018-02-09 01:20:26 +00:00
install_maxminddb
2015-01-22 00:27:09 +00:00
2015-01-22 02:09:30 +00:00
install_c_ares
2016-02-13 10:21:54 +00:00
install_libssh
2016-08-26 13:18:29 +00:00
install_nghttp2
2017-08-01 23:36:01 +00:00
install_libtiff
install_spandsp
2017-08-02 00:04:15 +00:00
2020-01-13 21:48:10 +00:00
install_speexdsp
2017-08-02 00:04:15 +00:00
install_bcg729
2018-08-03 21:19:09 +00:00
2020-06-01 22:21:57 +00:00
install_ilbc
2020-09-29 04:33:06 +00:00
install_opus
2019-04-10 10:52:52 +00:00
install_brotli
2019-09-17 16:31:39 +00:00
install_minizip
2019-11-14 16:08:28 +00:00
install_sparkle
2015-01-22 00:27:09 +00:00
}
uninstall_all( ) {
2018-04-15 09:44:18 +00:00
if [ -d " ${ MACOSX_SUPPORT_LIBS } " ]
2013-07-05 23:26:15 +00:00
then
2018-04-15 09:44:18 +00:00
cd " ${ MACOSX_SUPPORT_LIBS } "
2013-07-05 23:26:15 +00:00
#
# Uninstall items in the reverse order from the order in which they're
2013-07-09 04:41:34 +00:00
# installed. Only uninstall if the download/build/install process
# completed; uninstall the version that appears in the name of
# the -done file.
2013-07-05 23:26:15 +00:00
#
# We also do a "make distclean", so that we don't have leftovers from
# old configurations.
#
2019-11-14 16:08:28 +00:00
uninstall_sparkle
2019-09-17 16:31:39 +00:00
uninstall_minizip
2019-04-10 10:52:52 +00:00
uninstall_brotli
2020-09-29 04:33:06 +00:00
uninstall_opus
2020-06-01 22:21:57 +00:00
uninstall_ilbc
2018-04-15 09:44:18 +00:00
uninstall_bcg729
2017-08-02 00:04:15 +00:00
2020-01-13 21:48:10 +00:00
uninstall_speexdsp
2018-04-15 09:44:18 +00:00
uninstall_spandsp
2017-08-01 23:36:01 +00:00
2018-04-15 09:44:18 +00:00
uninstall_libtiff
2017-08-01 23:36:01 +00:00
2016-08-26 13:18:29 +00:00
uninstall_nghttp2
2016-02-13 10:21:54 +00:00
uninstall_libssh
2015-01-22 02:09:30 +00:00
uninstall_c_ares
2013-10-28 22:38:23 +00:00
2018-02-09 01:20:26 +00:00
uninstall_maxminddb
2013-10-28 22:38:23 +00:00
2016-11-02 05:56:30 +00:00
uninstall_snappy
2019-08-12 21:57:45 +00:00
uninstall_zstd
2017-04-04 21:23:59 +00:00
uninstall_libxml2
2016-11-02 00:47:00 +00:00
uninstall_lz4
2016-10-20 08:36:36 +00:00
uninstall_sbc
2015-01-22 02:09:30 +00:00
uninstall_lua
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_gnutls
2013-07-05 23:26:15 +00:00
2017-06-16 07:19:53 +00:00
uninstall_nettle
2020-11-26 06:10:34 +00:00
uninstall_p11_kit
uninstall_libtasn1
2017-06-16 07:19:53 +00:00
uninstall_gmp
2015-01-22 02:09:30 +00:00
uninstall_libgcrypt
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_libgpg_error
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_libsmi
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_qt
2013-10-29 01:49:59 +00:00
2015-01-22 02:09:30 +00:00
uninstall_glib
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_pkg_config
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_gettext
2013-07-05 23:26:15 +00:00
2018-05-15 03:42:32 +00:00
uninstall_ninja
2014-07-26 22:33:47 +00:00
#
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
2018-06-27 23:21:34 +00:00
uninstall_asciidoctorpdf
2018-02-26 23:11:51 +00:00
2018-06-27 23:21:34 +00:00
uninstall_asciidoctor
2018-02-26 23:11:51 +00:00
2021-07-29 21:06:58 +00:00
uninstall_meson
uninstall_python3
2015-01-22 02:09:30 +00:00
uninstall_cmake
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_libtool
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_automake
2013-07-05 23:26:15 +00:00
2015-01-22 02:09:30 +00:00
uninstall_autoconf
2013-07-05 23:26:15 +00:00
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
uninstall_pcre
2017-06-16 07:19:53 +00:00
uninstall_lzip
2015-01-22 02:09:30 +00:00
uninstall_xz
2018-05-19 00:29:25 +00:00
uninstall_curl
2013-07-05 23:26:15 +00:00
fi
}
#
# Do we have permission to write in /usr/local?
#
# If so, assume we have permission to write in its subdirectories.
# (If that's not the case, this test needs to check the subdirectories
# as well.)
#
2021-07-31 01:54:04 +00:00
# If not, do "make install", "make uninstall", "ninja install",
# "ninja uninstall", the removes for dependencies that don't support
# "make uninstall" or "ninja uninstall", the renames of [g]libtool*,
# and the writing of a libffi .pc file with sudo.
2013-07-05 23:26:15 +00:00
#
if [ -w /usr/local ]
then
2013-07-06 21:21:54 +00:00
DO_MAKE_INSTALL = "make install"
DO_MAKE_UNINSTALL = "make uninstall"
2021-07-29 21:06:58 +00:00
DO_NINJA_INSTALL = "ninja -C _build install"
DO_NINJA_UNINSTALL = "ninja -C _build uninstall"
2021-07-31 01:54:04 +00:00
DO_TEE_TO_PC_FILE = "tee"
2013-07-06 21:21:54 +00:00
DO_RM = "rm"
2014-09-26 06:05:20 +00:00
DO_MV = "mv"
2013-07-05 23:26:15 +00:00
else
2013-07-06 21:21:54 +00:00
DO_MAKE_INSTALL = "sudo make install"
DO_MAKE_UNINSTALL = "sudo make uninstall"
2021-07-29 21:06:58 +00:00
DO_NINJA_INSTALL = "sudo ninja -C _build install"
DO_NINJA_UNINSTALL = "sudo ninja -C _build uninstall"
2021-07-31 01:54:04 +00:00
DO_TEE_TO_PC_FILE = "sudo tee"
2013-07-06 21:21:54 +00:00
DO_RM = "sudo rm"
2014-09-26 06:05:20 +00:00
DO_MV = "sudo mv"
2013-07-05 23:26:15 +00:00
fi
2017-10-23 12:44:12 +00:00
# This script is meant to be run in the source root. The following
# code will attempt to get you there, but is not perfect (particulary
# if someone copies the script).
2018-04-15 09:44:18 +00:00
topdir = ` pwd ` /` dirname $0 ` /..
cd $topdir
# Preference of the support libraries directory:
# ${MACOSX_SUPPORT_LIBS}
# ../macosx-support-libs
# ./macosx-support-libs (default if none exists)
if [ ! -d " ${ MACOSX_SUPPORT_LIBS } " ] ; then
unset MACOSX_SUPPORT_LIBS
fi
if [ -d ../macosx-support-libs ] ; then
MACOSX_SUPPORT_LIBS = ${ MACOSX_SUPPORT_LIBS -../macosx-support-libs }
else
MACOSX_SUPPORT_LIBS = ${ MACOSX_SUPPORT_LIBS -./macosx-support-libs }
fi
2017-10-23 12:44:12 +00:00
2013-07-31 05:00:28 +00:00
#
2013-08-23 23:27:07 +00:00
# If we have SDKs available, the default target OS is the major version
2014-12-20 17:47:01 +00:00
# of the one we're running; get that and strip off the third component
# if present.
2013-07-31 05:00:28 +00:00
#
2013-08-23 23:27:07 +00:00
for i in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
if [ -d " $i " ]
then
2014-12-20 17:47:01 +00:00
min_osx_target = ` sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/' `
2013-08-23 23:27:07 +00:00
break
fi
done
2013-07-31 05:00:28 +00:00
2013-07-05 23:26:15 +00:00
#
# Parse command-line flags:
#
# -h - print help.
2013-07-06 06:16:06 +00:00
# -t <target> - build libraries so that they'll work on the specified
2017-04-05 17:50:53 +00:00
# version of macOS and later versions.
2013-07-05 23:26:15 +00:00
# -u - do an uninstall.
2017-04-19 15:40:02 +00:00
# -n - download all packages, but don't build or install.
2013-07-05 23:26:15 +00:00
#
2017-04-19 15:40:02 +00:00
no_build = false
while getopts ht:un name
2013-07-05 23:26:15 +00:00
do
case $name in
u)
do_uninstall = yes
; ;
2017-04-19 15:40:02 +00:00
n)
no_build = true
; ;
2013-07-06 06:16:06 +00:00
t)
min_osx_target = " $OPTARG "
; ;
2013-07-05 23:26:15 +00:00
h| ?)
2017-08-02 07:39:58 +00:00
echo "Usage: macos-setup.sh [ -t <target> ] [ -u ] [ -n ]" 1>& 1
2013-07-05 23:26:15 +00:00
exit 0
; ;
esac
done
2015-01-22 02:09:30 +00:00
#
# Get the version numbers of installed packages, if any.
#
2018-04-15 09:44:18 +00:00
if [ -d " ${ MACOSX_SUPPORT_LIBS } " ]
2015-01-22 02:09:30 +00:00
then
2018-04-15 09:44:18 +00:00
cd " ${ MACOSX_SUPPORT_LIBS } "
2015-01-22 02:09:30 +00:00
installed_xz_version = ` ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/' `
2017-06-16 07:19:53 +00:00
installed_lzip_version = ` ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/' `
macos-setup.sh: Update various software versions
Update versions of xz, lzip, gettext, libgpg, libgpg-error, libgcrypt, gnutls and gmp
to newest releases.
Also update glib but only to last version with autotools support - meson build is left
for another time.
Current versions of glib require a libpcre with unicode enabled which the Catalina system
version does not provide, so install the current version of libpcre as well.
Update some additional tools to commit 3a42bf0de2b9e35efcc3cea38153ab95cb71b352:
brotli, libmaxminddb, lz4, and snappy
2020-12-01 16:44:13 +00:00
installed_pcre_version = ` ls pcre-*-done 2>/dev/null | sed 's/pcre-\(.*\)-done/\1/' `
2021-11-12 20:23:16 +00:00
installed_pcre2_version = $( ls pcre2-*-done 2>/dev/null | sed 's/pcre2-\(.*\)-done/\1/' )
2015-01-22 02:09:30 +00:00
installed_autoconf_version = ` ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/' `
installed_automake_version = ` ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/' `
installed_libtool_version = ` ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/' `
installed_cmake_version = ` ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/' `
2018-05-15 03:42:32 +00:00
installed_ninja_version = ` ls ninja-*-done 2>/dev/null | sed 's/ninja-\(.*\)-done/\1/' `
2018-02-26 23:11:51 +00:00
installed_asciidoctor_version = ` ls asciidoctor-*-done 2>/dev/null | sed 's/asciidoctor-\(.*\)-done/\1/' `
installed_asciidoctorpdf_version = ` ls asciidoctorpdf-*-done 2>/dev/null | sed 's/asciidoctorpdf-\(.*\)-done/\1/' `
2015-01-22 02:09:30 +00:00
installed_gettext_version = ` ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/' `
installed_pkg_config_version = ` ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/' `
installed_glib_version = ` ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/' `
installed_qt_version = ` ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/' `
installed_libsmi_version = ` ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/' `
installed_libgpg_error_version = ` ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/' `
installed_libgcrypt_version = ` ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/' `
2017-06-16 07:19:53 +00:00
installed_gmp_version = ` ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/' `
2020-11-26 06:10:34 +00:00
installed_libtasn1_version = ` ls libtasn1-*-done 2>/dev/null | sed 's/libtasn1-\(.*\)-done/\1/' `
installed_p11_kit_version = ` ls p11-kit-*-done 2>/dev/null | sed 's/p11-kit-\(.*\)-done/\1/' `
2017-06-16 07:19:53 +00:00
installed_nettle_version = ` ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/' `
2015-01-22 02:09:30 +00:00
installed_gnutls_version = ` ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/' `
installed_lua_version = ` ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/' `
2016-11-02 05:56:30 +00:00
installed_snappy_version = ` ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/' `
2019-08-12 21:57:45 +00:00
installed_zstd_version = ` ls zstd-*-done 2>/dev/null | sed 's/zstd-\(.*\)-done/\1/' `
2017-04-04 21:23:59 +00:00
installed_libxml2_version = ` ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/' `
2016-11-02 00:47:00 +00:00
installed_lz4_version = ` ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/' `
2016-10-20 08:36:36 +00:00
installed_sbc_version = ` ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/' `
2018-02-09 01:20:26 +00:00
installed_maxminddb_version = ` ls maxminddb-*-done 2>/dev/null | sed 's/maxminddb-\(.*\)-done/\1/' `
2015-01-22 02:09:30 +00:00
installed_cares_version = ` ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/' `
2016-02-13 10:21:54 +00:00
installed_libssh_version = ` ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/' `
2016-08-26 13:18:29 +00:00
installed_nghttp2_version = ` ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/' `
2017-08-01 23:36:01 +00:00
installed_libtiff_version = ` ls tiff-*-done 2>/dev/null | sed 's/tiff-\(.*\)-done/\1/' `
2018-10-13 21:00:23 +00:00
installed_spandsp_version = ` ls spandsp-*-done 2>/dev/null | sed 's/spandsp-\(.*\)-done/\1/' `
2020-01-13 21:48:10 +00:00
installed_speexdsp_version = ` ls speexdsp-*-done 2>/dev/null | sed 's/speexdsp-\(.*\)-done/\1/' `
2018-10-13 21:00:23 +00:00
installed_bcg729_version = ` ls bcg729-*-done 2>/dev/null | sed 's/bcg729-\(.*\)-done/\1/' `
2020-06-01 22:21:57 +00:00
installed_ilbc_version = ` ls ilbc-*-done 2>/dev/null | sed 's/ilbc-\(.*\)-done/\1/' `
2020-09-29 04:33:06 +00:00
installed_opus_version = ` ls opus-*-done 2>/dev/null | sed 's/opus-\(.*\)-done/\1/' `
2018-10-13 13:56:02 +00:00
installed_python3_version = ` ls python3-*-done 2>/dev/null | sed 's/python3-\(.*\)-done/\1/' `
2019-04-10 10:52:52 +00:00
installed_brotli_version = ` ls brotli-*-done 2>/dev/null | sed 's/brotli-\(.*\)-done/\1/' `
2019-09-17 16:31:39 +00:00
installed_minizip_version = ` ls minizip-*-done 2>/dev/null | sed 's/minizip-\(.*\)-done/\1/' `
2019-11-14 16:08:28 +00:00
installed_sparkle_version = ` ls sparkle-*-done 2>/dev/null | sed 's/sparkle-\(.*\)-done/\1/' `
2015-01-22 02:09:30 +00:00
2018-04-15 09:44:18 +00:00
cd $topdir
2015-01-22 02:09:30 +00:00
fi
2013-07-05 23:26:15 +00:00
if [ " $do_uninstall " = "yes" ]
then
2015-01-22 00:27:09 +00:00
uninstall_all
2013-07-05 23:26:15 +00:00
exit 0
fi
2013-10-29 01:49:59 +00:00
#
# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
# invoked without CFLAGS or CXXFLAGS being set in the environment.
#
# However, we *are* setting them in the environment, for our own
# nefarious purposes, so start them out as "-g -O2".
#
CFLAGS = "-g -O2"
CXXFLAGS = "-g -O2"
2013-06-19 23:52:54 +00:00
# if no make options are present, set default options
if [ -z " $MAKE_BUILD_OPTS " ] ; then
# by default use 1.5x number of cores for parallel build
MAKE_BUILD_OPTS = " -j $(( $( sysctl -n hw.logicalcpu) * 3 / 2 )) "
fi
2013-06-17 23:30:56 +00:00
2013-07-06 06:16:06 +00:00
#
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
# If we have a target release, look for the oldest SDK that's for an
# OS equal to or later than that one, and build libraries against it
# rather than against the headers and, more importantly, libraries
# that come with the OS, so that we don't end up with support libraries
# that only work on the OS version on which we built them, not earlier
# versions of the same release, or earlier releases if the minimum is
# earlier.
2013-07-06 06:16:06 +00:00
#
2013-08-23 23:27:07 +00:00
if [ ! -z " $min_osx_target " ]
then
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
2020-11-26 02:23:06 +00:00
# Get the major and minor version of the target release.
# We assume it'll be a while before there's a macOS 100. :-)
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
2020-11-26 02:23:06 +00:00
case " $min_osx_target " in
[ 1-9] [ 0-9] .*)
#
# major.minor.
#
min_osx_target_major = ` echo " $min_osx_target " | sed -n 's/\([1-9][0-9]*\)\..*/\1/p' `
min_osx_target_minor = ` echo " $min_osx_target " | sed -n 's/[1-9][0-9]*\.\(.*\)/\1/p' `
; ;
[ 1-9] [ 0-9] )
#
# Just a major version number was specified; make the minor
# version 0.
#
min_osx_target_major = " $min_osx_target "
min_osx_target_minor = 0
; ;
*)
echo " macosx-setup.sh: Invalid target release $min_osx_target " 1>& 2
exit 1
; ;
esac
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
# Search each directory that might contain SDKs.
#
sdkpath = ""
for sdksdir in /Developer/SDKs \
2013-08-23 23:27:07 +00:00
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
# Get a list of all the SDKs.
#
if ! test -d " $sdksdir "
2013-08-23 23:27:07 +00:00
then
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
# There is no directory with that name.
# Move on to the next one in the list, if any.
#
continue
2013-08-23 23:27:07 +00:00
fi
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
# Get a list of all the SDKs in that directory, if any.
2020-11-26 02:23:06 +00:00
# We assume it'll be a while before there's a macOS 100. :-)
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
2020-11-26 02:23:06 +00:00
sdklist = ` ( cd " $sdksdir " ; ls -d MacOSX[ 1-9] [ 0-9] .[ 0-9] *.sdk 2>/dev/null) `
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
for sdk in $sdklist
do
#
2020-11-26 02:23:06 +00:00
# Get the major and minor version for this SDK.
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
2020-11-26 02:23:06 +00:00
sdk_major = ` echo " $sdk " | sed -n 's/MacOSX\([1-9][0-9]*\)\..*\.sdk/\1/p' `
sdk_minor = ` echo " $sdk " | sed -n 's/MacOSX[1-9][0-9]*\.\(.*\)\.sdk/\1/p' `
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
# Is it for the deployment target or some later release?
2021-02-23 13:37:53 +00:00
# Starting with major 11, the minor version no longer matters.
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
#
2020-11-26 02:23:06 +00:00
if test " $sdk_major " -gt " $min_osx_target_major " -o \
\( " $sdk_major " -eq " $min_osx_target_major " -a \
2021-02-23 13:37:53 +00:00
\( " $sdk_major " -ge 11 -o \
" $sdk_minor " -ge " $min_osx_target_minor " \) \)
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
then
#
# Yes, use it.
#
sdkpath = " $sdksdir / $sdk "
break 2
fi
done
2013-08-23 23:27:07 +00:00
done
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
if [ -z " $sdkpath " ]
2013-07-06 06:16:06 +00:00
then
2017-08-02 07:39:58 +00:00
echo " macos-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later " 1>& 2
2013-08-23 23:27:07 +00:00
exit 1
2013-07-06 06:16:06 +00:00
fi
2013-07-31 05:00:28 +00:00
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
SDKPATH = " $sdkpath "
2020-11-26 02:23:06 +00:00
echo " Using the $sdk_major . $sdk_minor SDK "
For OS X, don't rigidly tie the SDK version to the minimum target version.
According to
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/cross_development/Configuring/configuring.html#//apple_ref/doc/uid/10000163i-CH1-SW1
the deployment target (minimum target OS version) and SDK version aren't
necessarily the same and, in fact, Apple typically only ship two SDKs
with each Xcode release, so if you want to build for 10.6 with the 10.6
SDK, you have to use a version of Xcode sufficiently old to have the
10.6 SDK.
Here, we instead search for the oldest SDK for an OS whose version is
greater than or equal to the deployment target. Note that this may not
work for X11-based Wireshark, as the X11 libraries can change
incompatibly between releases. (Fortunately, our plan is to kick
X11-based Wireshark to the curb for OS X, removing a large pile of
aggravation for users.)
This also requires some fixes when building Qt and gdk-pixbuf, as some
cases where we were using the minimum OS target version we needed to be
using the SDK version.
For CMake, we're using its native "deployment target" support for OS X,
and hope that it will somehow do the right thing.
Change-Id: Ie8f42c5e4719e7ebdc56b9ba5a330665bee06280
Reviewed-on: https://code.wireshark.org/review/5031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
2014-10-31 19:11:22 +00:00
2013-08-23 23:27:07 +00:00
#
# Make sure there are links to /usr/local/include and /usr/local/lib
# in the SDK's usr/local.
#
if [ ! -e $SDKPATH /usr/local/include ]
2013-07-06 06:16:06 +00:00
then
2013-08-23 23:27:07 +00:00
if [ ! -d $SDKPATH /usr/local ]
then
sudo mkdir $SDKPATH /usr/local
fi
sudo ln -s /usr/local/include $SDKPATH /usr/local/include
2013-07-06 06:16:06 +00:00
fi
2013-08-23 23:27:07 +00:00
if [ ! -e $SDKPATH /usr/local/lib ]
2013-07-06 06:16:06 +00:00
then
2013-08-23 23:27:07 +00:00
if [ ! -d $SDKPATH /usr/local ]
then
sudo mkdir $SDKPATH /usr/local
fi
sudo ln -s /usr/local/lib $SDKPATH /usr/local/lib
2013-07-06 06:16:06 +00:00
fi
#
2013-08-23 23:27:07 +00:00
# Set the minimum OS version for which to build to the specified
# minimum target OS version, so we don't, for example, end up using
# linker features supported by the OS verson on which we're building
# but not by the target version.
2013-07-06 06:16:06 +00:00
#
2013-08-23 23:27:07 +00:00
VERSION_MIN_FLAGS = " -mmacosx-version-min= $min_osx_target "
2013-07-06 06:16:06 +00:00
#
2013-08-23 23:27:07 +00:00
# Compile and link against the SDK.
2013-07-31 05:00:28 +00:00
#
2013-08-23 23:27:07 +00:00
SDKFLAGS = " -isysroot $SDKPATH "
2013-07-09 04:41:34 +00:00
2013-07-06 06:16:06 +00:00
fi
2013-10-29 01:49:59 +00:00
export CFLAGS
export CXXFLAGS
2011-07-15 21:48:02 +00:00
#
2022-04-05 10:31:39 +00:00
# You need Xcode or the command-line tools installed to get the compilers (xcrun checks both).
2011-07-15 21:48:02 +00:00
#
2022-04-05 10:31:39 +00:00
if [ ! -x /usr/bin/xcrun ] ; then
echo "Please install Xcode (app or command line) first (should be available on DVD or from the Mac App Store)."
2013-07-06 21:21:54 +00:00
exit 1
2011-08-24 10:18:25 +00:00
fi
2013-10-29 01:49:59 +00:00
if [ " $QT_VERSION " ] ; then
2013-10-23 01:39:54 +00:00
#
# We need Xcode, not just the command-line tools, installed to build
# Qt.
#
2016-09-22 09:59:53 +00:00
# At least with Xcode 8, /usr/bin/xcodebuild --help fails if only
# the command-line tools are installed and succeeds if Xcode is
2016-09-22 20:54:13 +00:00
# installed. Unfortunately, it fails *with* Xcode 3, but
# /usr/bin/xcodebuild -version works with that and with Xcode 8.
# Hopefully it fails with only the command-line tools installed.
2016-09-15 00:05:26 +00:00
#
2016-09-22 20:54:13 +00:00
if /usr/bin/xcodebuild -version >/dev/null 2>& 1; then
2016-09-22 09:59:53 +00:00
:
2022-04-05 10:31:39 +00:00
elif qmake --version >/dev/null 2>& 1; then
:
2016-09-22 09:59:53 +00:00
else
2016-09-22 10:11:17 +00:00
echo "Please install Xcode first (should be available on DVD or from the Mac App Store)."
2013-10-23 01:39:54 +00:00
echo "The command-line build tools are not sufficient to build Qt."
2022-04-05 10:31:39 +00:00
echo "Alternatively build QT according to: https://gist.github.com/shoogle/750a330c851bd1a924dfe1346b0b4a08#:~:text=MacOS%2FQt%5C%20Creator-,Go%20to%20Qt%20Creator%20%3E%20Preferences%20%3E%20Build%20%26%20Run%20%3E%20Kits,for%20both%20compilers%2C%20not%20gcc%20."
2013-10-23 01:39:54 +00:00
exit 1
fi
2013-10-29 01:49:59 +00:00
fi
2011-07-15 21:48:02 +00:00
2018-04-10 04:58:26 +00:00
export PKG_CONFIG_PATH = /usr/local/lib/pkgconfig
2011-07-15 21:48:02 +00:00
#
# Do all the downloads and untarring in a subdirectory, so all that
# stuff can be removed once we've installed the support libraries.
2018-04-15 09:44:18 +00:00
if [ ! -d " ${ MACOSX_SUPPORT_LIBS } " ]
2011-07-15 21:48:02 +00:00
then
2018-04-15 09:44:18 +00:00
mkdir " ${ MACOSX_SUPPORT_LIBS } " || exit 1
2011-07-15 21:48:02 +00:00
fi
2018-04-15 09:44:18 +00:00
cd " ${ MACOSX_SUPPORT_LIBS } "
2011-07-15 21:48:02 +00:00
2015-01-22 00:27:09 +00:00
install_all
2013-10-28 22:38:23 +00:00
2011-07-15 21:48:02 +00:00
echo ""
2015-04-17 06:18:57 +00:00
#
2015-06-24 02:22:16 +00:00
# Indicate what paths to use for pkg-config and cmake.
2015-04-17 06:18:57 +00:00
#
pkg_config_path = /usr/local/lib/pkgconfig
if [ " $QT_VERSION " ] ; then
2018-12-10 00:00:50 +00:00
qt_base_path = $HOME /Qt$QT_VERSION /$QT_VERSION /clang_64
2016-01-02 00:09:33 +00:00
pkg_config_path = " $pkg_config_path " :" $qt_base_path /lib/pkgconfig "
2015-06-24 02:22:16 +00:00
CMAKE_PREFIX_PATH = " $CMAKE_PREFIX_PATH " :" $qt_base_path /lib/cmake "
2015-04-17 06:18:57 +00:00
fi
2017-04-19 15:40:02 +00:00
if $no_build ; then
echo "All required dependencies downloaded. Run without -n to install them."
exit 0
fi
2015-06-26 00:16:51 +00:00
echo "You are now prepared to build Wireshark."
echo
2018-05-14 22:07:25 +00:00
echo "To build:"
echo
echo " export PKG_CONFIG_PATH= $pkg_config_path "
echo " export CMAKE_PREFIX_PATH= $CMAKE_PREFIX_PATH "
echo " export PATH= $PATH : $qt_base_path /bin "
echo
echo "mkdir build; cd build"
2018-05-15 06:32:47 +00:00
if [ ! -z " $NINJA_VERSION " ] ; then
2019-03-14 04:07:01 +00:00
echo "cmake -G Ninja .."
2022-06-30 16:45:49 +00:00
echo "ninja wireshark_app_bundle logray_app_bundle # (Modify as needed)"
2018-05-15 06:32:47 +00:00
echo "ninja install/strip"
else
2019-03-14 04:07:01 +00:00
echo "cmake .."
2022-06-30 16:45:49 +00:00
echo " make $MAKE_BUILD_OPTS wireshark_app_bundle logray_app_bundle # (Modify as needed) "
2018-05-15 06:32:47 +00:00
echo "make install/strip"
fi
2018-05-14 22:07:25 +00:00
echo
2011-07-15 21:48:02 +00:00
echo "Make sure you are allowed capture access to the network devices"
2020-10-03 02:17:00 +00:00
echo "See: https://gitlab.com/wireshark/wireshark/-/wikis/CaptureSetup/CapturePrivileges"
2015-06-26 00:16:51 +00:00
echo
2011-07-15 21:48:02 +00:00
exit 0