#!/bin/bash # Setup development environment on macOS (tested with 10.6.8 and Xcode # 3.2.6 and with 10.12.4 and Xcode 8.3). # # Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file) # # Wireshark - Network traffic analyzer # By Gerald Combs # Copyright 1998 Gerald Combs # # SPDX-License-Identifier: GPL-2.0-or-later shopt -s extglob # # Get the major version of Darwin, so we can check the major macOS # version. # DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'` # # The minimum supported version of Qt is 5.9, so the minimum supported version # of macOS is OS X 10.10 (Yosemite), aka Darwin 14.0 if [[ $DARWIN_MAJOR_VERSION -lt 14 ]]; then echo "This script does not support any versions of macOS before Yosemite" 1>&2 exit 1 fi # # Get the processor architecture of Darwin. Currently supported: arm, i386 # DARWIN_PROCESSOR_ARCH=`uname -p` if [ "$DARWIN_PROCESSOR_ARCH" != "arm" -a "$DARWIN_PROCESSOR_ARCH" != "i386" ]; then echo "This script does not support this processor architecture" 1>&2 exit 1 fi # # Versions of packages to download and install. # # # We use curl, but older versions of curl in older macOS releases can't # handle some sites - including the xz site. # # If the version of curl in the system is older than 7.54.0, download # curl and install it. # current_curl_version=`curl --version | sed -n 's/curl \([0-9.]*\) .*/\1/p'` current_curl_major_version="`expr $current_curl_version : '\([0-9][0-9]*\).*'`" current_curl_minor_version="`expr $current_curl_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" if [[ $current_curl_major_version -lt 7 || ($current_curl_major_version -eq 7 && $current_curl_minor_version -lt 54) ]]; then CURL_VERSION=${CURL_VERSION-7.60.0} fi # # Some packages need xz to unpack their current source. # XXX: tar, since macOS 10.9, can uncompress xz'ed tarballs, # so perhaps we could get rid of this now? # XZ_VERSION=5.2.5 # # Some packages need lzip to unpack their current source. # LZIP_VERSION=1.21 # # The version of libPCRE on Catalina is insufficient to build glib due to # missing UTF-8 support. # PCRE_VERSION=8.45 # # CMake is required to do the build - and to build some of the # dependencies. # CMAKE_VERSION=${CMAKE_VERSION-3.21.4} # # Ninja isn't required, as make is provided with Xcode, but it is # claimed to build faster than make. # Comment it out if you don't want it. # NINJA_VERSION=${NINJA_VERSION-1.10.2} # # The following libraries and tools are required even to build only TShark. # GETTEXT_VERSION=0.21 GLIB_VERSION=2.68.4 if [ "$GLIB_VERSION" ]; then GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`" GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" GLIB_MAJOR_MINOR_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION GLIB_MAJOR_MINOR_DOTDOT_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_DOTDOT_VERSION fi PKG_CONFIG_VERSION=0.29.2 # # libgpg-error is required for libgcrypt. # LIBGPG_ERROR_VERSION=1.39 # # libgcrypt is required. # LIBGCRYPT_VERSION=1.8.7 # # libpcre2 is required. # PCRE2_VERSION=10.39 # # One or more of the following libraries are required to build Wireshark. # # To override the version of Qt call the script with some of the variables # set to the new values. Setting the variable to empty will disable building # the toolkit and will uninstall # any version previously installed by the # script, e.g. # "QT_VERSION=5.10.1 ./macos-setup.sh" # will build and install with QT 5.10.1. # QT_VERSION=${QT_VERSION-5.12.12} if [ "$QT_VERSION" ]; then QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`" QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION fi # # The following libraries are optional. # Comment them out if you don't want them, but note that some of # the optional libraries are required by other optional libraries. # LIBSMI_VERSION=0.4.8 GNUTLS_VERSION=3.6.15 if [ "$GNUTLS_VERSION" ]; then # # We'll be building GnuTLS, so we may need some additional libraries. # We assume GnuTLS can work with Nettle; newer versions *only* use # Nettle, not libgcrypt. # GNUTLS_MAJOR_VERSION="`expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'`" GNUTLS_MINOR_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" NETTLE_VERSION=3.6 # # And, in turn, Nettle requires GMP. # GMP_VERSION=6.2.1 # # And p11-kit P11KIT_VERSION=0.23.21 # Which requires libtasn1 LIBTASN1_VERSION=4.16.0 fi # Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3 # yet, and we need to check for compatibility issues (we'd want Lua # scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua # features present in all three versions) LUA_VERSION=5.2.4 SNAPPY_VERSION=1.1.8 ZSTD_VERSION=1.4.2 LIBXML2_VERSION=2.9.9 LZ4_VERSION=1.9.2 SBC_VERSION=1.3 CARES_VERSION=1.15.0 LIBSSH_VERSION=0.9.6 # mmdbresolve MAXMINDDB_VERSION=1.4.3 NGHTTP2_VERSION=1.46.0 SPANDSP_VERSION=0.0.6 SPEEXDSP_VERSION=1.2.0 if [ "$SPANDSP_VERSION" ]; then # # SpanDSP depends on libtiff. # LIBTIFF_VERSION=3.8.1 fi BCG729_VERSION=1.0.2 ILBC_VERSION=2.0.2 OPUS_VERSION=1.3.1 # # Is /usr/bin/python3 a working version of Python? It may be, as it # might be a wrapper that runs the Python 3 that's part of Xcode. # if /usr/bin/python3 --version >/dev/null 2>&1 then # # Yes - don't bother installing Python 3 from elsewhere # : else # # No - install a Python package. # PYTHON3_VERSION=3.9.5 fi BROTLI_VERSION=1.0.9 # minizip ZLIB_VERSION=1.2.11 # Uncomment to enable automatic updates using Sparkle #SPARKLE_VERSION=2.1.0 # # Asciidoctor is required to build the documentation. # ASCIIDOCTOR_VERSION=${ASCIIDOCTOR_VERSION-2.0.16} ASCIIDOCTORPDF_VERSION=${ASCIIDOCTORPDF_VERSION-1.6.1} # # GNU autotools. They're not supplied with the macOS versions we # support, and we currently use them for minizip. # AUTOCONF_VERSION=2.71 AUTOMAKE_VERSION=1.16.5 LIBTOOL_VERSION=2.4.6 install_curl() { if [ "$CURL_VERSION" -a ! -f curl-$CURL_VERSION-done ] ; then echo "Downloading, building, and installing curl:" [ -f curl-$CURL_VERSION.tar.bz2 ] || curl -L -O https://curl.haxx.se/download/curl-$CURL_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat curl-$CURL_VERSION.tar.bz2 | tar xf - || exit 1 cd curl-$CURL_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch curl-$CURL_VERSION-done fi } uninstall_curl() { if [ ! -z "$installed_curl_version" ] ; then echo "Uninstalling curl:" cd curl-$installed_curl_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm curl-$installed_curl_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf curl-$installed_curl_version rm -rf curl-$installed_curl_version.tar.bz2 fi installed_curl_version="" fi } install_xz() { if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then echo "Downloading, building, and installing xz:" [ -f xz-$XZ_VERSION.tar.bz2 ] || curl -L -O https://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1 cd xz-$XZ_VERSION # # This builds and installs liblzma, which libxml2 uses, and # Wireshark uses liblzma, so we need to build this with # all the minimum-deployment-version and SDK stuff. # CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch xz-$XZ_VERSION-done fi } uninstall_xz() { if [ ! -z "$installed_xz_version" ] ; then echo "Uninstalling xz:" cd xz-$installed_xz_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm xz-$installed_xz_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf xz-$installed_xz_version rm -rf xz-$installed_xz_version.tar.bz2 fi installed_xz_version="" fi } install_lzip() { if [ "$LZIP_VERSION" -a ! -f lzip-$LZIP_VERSION-done ] ; then echo "Downloading, building, and installing lzip:" [ -f lzip-$LZIP_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lzip-$LZIP_VERSION.tar.gz | tar xf - || exit 1 cd lzip-$LZIP_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lzip-$LZIP_VERSION-done fi } uninstall_lzip() { if [ ! -z "$installed_lzip_version" ] ; then echo "Uninstalling lzip:" cd lzip-$installed_lzip_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm lzip-$installed_lzip_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lzip-$installed_lzip_version rm -rf lzip-$installed_lzip_version.tar.gz fi installed_lzip_version="" fi } install_pcre() { if [ "$PCRE_VERSION" -a ! -f pcre-$PCRE_VERSION-done ] ; then echo "Downloading, building, and installing pcre:" [ -f pcre-$PCRE_VERSION.tar.bz2 ] || curl -L -O https://sourceforge.net/projects/pcre/files/pcre/$PCRE_VERSION/pcre-$PCRE_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat pcre-$PCRE_VERSION.tar.bz2 | tar xf - || exit 1 cd pcre-$PCRE_VERSION ./configure --enable-unicode-properties || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch pcre-$PCRE_VERSION-done fi } uninstall_pcre() { if [ ! -z "$installed_pcre_version" ] ; then echo "Uninstalling pcre:" cd pcre-$installed_pcre_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm pcre-$installed_pcre_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf pcre-$installed_pcre_version rm -rf pcre-$installed_pcre_version.tar.bz2 fi installed_pcre_version="" fi } install_pcre2() { if [ "$PCRE2_VERSION" -a ! -f "pcre2-$PCRE2_VERSION-done" ] ; then echo "Downloading, building, and installing pcre2:" [ -f "pcre2-$PCRE2_VERSION.tar.bz2" ] || curl -L -O "https://github.com/PhilipHazel/pcre2/releases/download/pcre2-$PCRE2_VERSION/pcre2-10.39.tar.bz2" || exit 1 $no_build && echo "Skipping installation" && return bzcat "pcre2-$PCRE2_VERSION.tar.bz2" | tar xf - || exit 1 cd "pcre2-$PCRE2_VERSION" mkdir build_dir cd build_dir # https://github.com/Homebrew/homebrew-core/blob/master/Formula/pcre2.rb # https://github.com/microsoft/vcpkg/blob/master/ports/pcre2/portfile.cmake MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" \ cmake -DBUILD_STATIC_LIBS=OFF -DBUILD_SHARED_LIBS=ON -DPCRE2_SUPPORT_JIT=ON -DPCRE2_SUPPORT_UNICODE=ON .. || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch "pcre2-$PCRE2_VERSION-done" fi } uninstall_pcre2() { if [ -n "$installed_pcre2_version" ] && [ -s "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt" ] ; then echo "Uninstalling pcre2:" # PCRE2 10.39 installs pcre2unicode.3 twice, so this will return an error. while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt"; echo) rm "pcre2-$installed_pcre2_version-done" if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf "pcre2-$installed_pcre2_version" rm -rf "pcre2-$installed_pcre2_version.tar.bz2" fi installed_pcre2_version="" fi } install_autoconf() { if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then echo "Downloading, building and installing GNU autoconf..." [ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1 cd autoconf-$AUTOCONF_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch autoconf-$AUTOCONF_VERSION-done fi } uninstall_autoconf() { if [ ! -z "$installed_autoconf_version" ] ; then # # automake and libtool depend on this, so uninstall them. # uninstall_libtool "$@" uninstall_automake "$@" echo "Uninstalling GNU autoconf:" cd autoconf-$installed_autoconf_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm autoconf-$installed_autoconf_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf autoconf-$installed_autoconf_version rm -rf autoconf-$installed_autoconf_version.tar.xz fi installed_autoconf_version="" fi } install_automake() { if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then echo "Downloading, building and installing GNU automake..." [ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1 cd automake-$AUTOMAKE_VERSION ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch automake-$AUTOMAKE_VERSION-done fi } uninstall_automake() { if [ ! -z "$installed_automake_version" ] ; then # # libtool depends on this(?), so uninstall it. # uninstall_libtool "$@" echo "Uninstalling GNU automake:" cd automake-$installed_automake_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm automake-$installed_automake_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf automake-$installed_automake_version rm -rf automake-$installed_automake_version.tar.xz fi installed_automake_version="" fi } install_libtool() { if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then echo "Downloading, building and installing GNU libtool..." [ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1 cd libtool-$LIBTOOL_VERSION ./configure --program-prefix=g || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libtool-$LIBTOOL_VERSION-done fi } uninstall_libtool() { if [ ! -z "$installed_libtool_version" ] ; then echo "Uninstalling GNU libtool:" cd libtool-$installed_libtool_version $DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool $DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libtool-$installed_libtool_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libtool-$installed_libtool_version rm -rf libtool-$installed_libtool_version.tar.xz fi installed_libtool_version="" fi } install_ninja() { if [ "$NINJA_VERSION" -a ! -f ninja-$NINJA_VERSION-done ] ; then echo "Downloading and installing Ninja:" # # Download the zipball, unpack it, and move the binary to # /usr/local/bin. # [ -f ninja-mac-v$NINJA_VERSION.zip ] || curl -L -o ninja-mac-v$NINJA_VERSION.zip https://github.com/ninja-build/ninja/releases/download/v$NINJA_VERSION/ninja-mac.zip || exit 1 $no_build && echo "Skipping installation" && return unzip ninja-mac-v$NINJA_VERSION.zip sudo mv ninja /usr/local/bin touch ninja-$NINJA_VERSION-done fi } uninstall_ninja() { if [ ! -z "$installed_ninja_version" ]; then echo "Uninstalling Ninja:" sudo rm /usr/local/bin/ninja rm ninja-$installed_ninja_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then rm -f ninja-mac-v$installed_ninja_version.zip fi installed_ninja_version="" fi } install_asciidoctor() { if [ ! -f asciidoctor-${ASCIIDOCTOR_VERSION}-done ]; then echo "Downloading and installing Asciidoctor:" sudo gem install -V asciidoctor --version "=${ASCIIDOCTOR_VERSION}" touch asciidoctor-${ASCIIDOCTOR_VERSION}-done fi } uninstall_asciidoctor() { if [ ! -z "$installed_asciidoctor_version" ]; then echo "Uninstalling Asciidoctor:" sudo gem uninstall -V asciidoctor --version "=${installed_asciidoctor_version}" rm asciidoctor-$installed_asciidoctor_version-done ##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # ## rm -f asciidoctor-$installed_asciidoctor_version ##fi installed_asciidoctor_version="" fi } install_asciidoctorpdf() { if [ ! -f asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done ]; then ## XXX gem does not track dependencies that are installed for asciidoctor-pdf ## record them for uninstallation ## ttfunk, pdf-core, prawn, prawn-table, Ascii85, ruby-rc4, hashery, afm, pdf-reader, prawn-templates, public_suffix, addressable, css_parser, prawn-svg, prawn-icon, safe_yaml, thread_safe, polyglot, treetop, asciidoctor-pdf echo "Downloading and installing Asciidoctor-pdf:" sudo gem install -V asciidoctor-pdf --version "=${ASCIIDOCTORPDF_VERSION}" touch asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done fi } uninstall_asciidoctorpdf() { if [ ! -z "$installed_asciidoctorpdf_version" ]; then echo "Uninstalling Asciidoctor:" sudo gem uninstall -V asciidoctor-pdf --version "=${installed_asciidoctorpdf_version}" ## XXX uninstall dependencies rm asciidoctorpdf-$installed_asciidoctorpdf_version-done ##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # ## rm -f asciidoctorpdf-$installed_asciidoctorpdf_version ##fi installed_asciidoctorpdf_version="" fi } install_cmake() { if [ ! -f cmake-$CMAKE_VERSION-done ]; then echo "Downloading and installing CMake:" CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`" CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION # # NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the # package in question supports both 32-bit and 64-bit x86. # case "$CMAKE_MAJOR_VERSION" in 0|1|2) echo "CMake $CMAKE_VERSION" is too old 1>&2 ;; 3) # # Download the DMG and do a drag install, where "drag" means # "mv". # # 3.1.1 to 3.19.1 have a Darwin-x86_64 DMG. # 3.19.2 has a macos-universal DMG for 10.10 and later # 3.19.3 and later have a macos-universal DMG for 10.13 and later, # and a macos10.10-universal DMG for 10.10 and later. # if [ "$CMAKE_MINOR_VERSION" -lt 5 ]; then echo "CMake $CMAKE_VERSION" is too old 1>&2 elif [ "$CMAKE_MINOR_VERSION" -lt 19 -o \ "$CMAKE_VERSION" = 3.19.0 -o \ "$CMAKE_VERSION" = 3.19.1 ]; then type="Darwin-x86_64" elif [ "$CMAKE_VERSION" = 3.19.2 -o \ "$DARWIN_MAJOR_VERSION" -ge 17 ]; then type="macos-universal" else type="macos10.0-universal" fi [ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1 sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1 # # Plant the appropriate symbolic links in /usr/local/bin. # It's a drag-install, so there's no installer to make them, # and the CMake code to put them in place is lame, as # # 1) it defaults to /usr/bin, not /usr/local/bin; # 2) it doesn't request the necessary root privileges; # 3) it can't be run from the command line; # # so we do it ourselves. # for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i done sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type ;; *) ;; esac touch cmake-$CMAKE_VERSION-done fi } uninstall_cmake() { if [ ! -z "$installed_cmake_version" ]; then echo "Uninstalling CMake:" installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`" case "$installed_cmake_major_version" in 0|1|2) echo "CMake $installed_cmake_version" is too old 1>&2 ;; 3) sudo rm -rf /Applications/CMake.app for i in ccmake cmake cmake-gui cmakexbuild cpack ctest do sudo rm -f /usr/local/bin/$i done rm cmake-$installed_cmake_version-done ;; esac if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version, # whatever it might happen to be called. # rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg rm -f cmake-$installed_cmake_version-macos-universal.dmg rm -f cmake-$installed_cmake_version-macos10.0-universal.dmg fi installed_cmake_version="" fi } install_meson() { # # Install Meson with pip3 if we don't have it already. # if $MESON --version >/dev/null 2>&1 then # We have it. : else sudo pip3 install meson touch meson-done fi } uninstall_meson() { # # If we installed Meson, uninstal it with pip3. # if [ -f meson-done ] ; then sudo pip3 uninstall meson rm -f meson-done fi } install_gettext() { if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then echo "Downloading, building, and installing GNU gettext:" [ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1 cd gettext-$GETTEXT_VERSION CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gettext-$GETTEXT_VERSION-done fi } uninstall_gettext() { if [ ! -z "$installed_gettext_version" ] ; then # # GLib depends on this, so uninstall it. # uninstall_glib "$@" echo "Uninstalling GNU gettext:" cd gettext-$installed_gettext_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gettext-$installed_gettext_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gettext-$installed_gettext_version rm -rf gettext-$installed_gettext_version.tar.gz fi installed_gettext_version="" fi } install_pkg_config() { if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then echo "Downloading, building, and installing pkg-config:" [ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1 cd pkg-config-$PKG_CONFIG_VERSION ./configure --with-internal-glib || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch pkg-config-$PKG_CONFIG_VERSION-done fi } uninstall_pkg_config() { if [ ! -z "$installed_pkg_config_version" ] ; then echo "Uninstalling pkg-config:" cd pkg-config-$installed_pkg_config_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm pkg-config-$installed_pkg_config_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf pkg-config-$installed_pkg_config_version rm -rf pkg-config-$installed_pkg_config_version.tar.gz fi installed_pkg_config_version="" fi } install_glib() { if [ ! -f glib-$GLIB_VERSION-done ] ; then echo "Downloading, building, and installing GLib:" glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'` # # Starting with GLib 2.28.8, xz-compressed tarballs are available. # [ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O https://download.gnome.org/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1 cd glib-$GLIB_VERSION # # First, determine where the system include files are. # (It's not necessarily /usr/include.) There's a bit of a # greasy hack here; pre-5.x versions of the developer tools # don't support the --show-sdk-path option, and will produce # no output, so includedir will be set to /usr/include # (in those older versions of the developer tools, there is # a /usr/include directory). # # We need this for several things we do later. # includedir=`SDKROOT="$SDKPATH" xcrun --show-sdk-path 2>/dev/null`/usr/include # # GLib's configuration procedure, whether autotools-based or # Meson-based, really likes to use pkg-config to find libraries, # including libffi. # # At least some versions of macOS provide libffi, but, as macOS # doesn't provide pkg-config, they don't provide a .pc file for # it, so the autotools-based configuration needs some trickery # to get it to find the OS-supplied libffi, and the Meson-based # configuration simply won't find it at all. # # So, if we have a system-provided libffi, but pkg-config # doesn't find libffi, we construct a .pc file for that libffi, # and install it in /usr/local/lib/pkgconfig. # if pkg-config libffi ; then # It found libffi; no need to install a .pc file, and we # don't want to overwrite what's there already. : elif [ ! -e $includedir/ffi/ffi.h ] ; then # We don't appear to have libffi as part of the system, so # let the configuration process figure out what to do. # # We test for the header file, not the library, because, in # Big Sur and later, there's no guarantee that, for a system # shared library, there's a corresponding dylib file in # /usr/lib. : else # # We have libffi, but pkg-config didn't find it; generate # and install the .pc file. # # # Now generate the .pc file. # # We generate the contents of the .pc file by using cat with # a here document containing a template for the file and # piping that to a sed command that replaces @INCLUDEDIR@ in # the template with the include directory we discovered # above, so that the .pc file gives the compiler flags # necessary to find the libffi headers (which are *not* # necessarily in /usr/include, as per the above). # # The EOF marker for the here document is in quotes, to tell # the shell not to do shell expansion, as .pc files use a # syntax to refer to .pc file variables that looks like the # syntax to refer to shell variables. # # The writing of the libffi.pc file is a greasy hack - the # process of generating the contents of the .pc file writes # to the standard output, but running the last process in # the pipeline as root won't allow the shell that's # *running* it to open the .pc file if we don't have write # permission on /usr/local/lib/pkgconfig, so we need a # program that creates a file and then reads from the # standard input and writes to that file. UN*Xes have a # program that does that; it's called "tee". :-) # # However, it *also* writes the file to the standard output, # so we redirect that to /dev/null when we run it. # cat <<"EOF" | sed "s;@INCLUDEDIR@;$includedir;" | $DO_TEE_TO_PC_FILE /usr/local/lib/pkgconfig/libffi.pc >/dev/null prefix=/usr libdir=${prefix}/lib includedir=@INCLUDEDIR@ Name: ffi Description: Library supporting Foreign Function Interfaces Version: 3.2.9999 Libs: -L${libdir} -lffi Cflags: -I${includedir}/ffi EOF fi # # GLib 2.59.1 and later use Meson+Ninja as the build system. # case $GLIB_MAJOR_VERSION in 1) echo "GLib $GLIB_VERSION" is too old 1>&2 ;; *) case $GLIB_MINOR_VERSION in [0-9]|1[0-9]|2[0-9]|3[0-7]) echo "GLib $GLIB_VERSION" is too old 1>&2 ;; 3[8-9]|4[0-9]|5[0-8]) if [ ! -f ./configure ]; then LIBTOOLIZE=glibtoolize ./autogen.sh fi # # At least with the version of Xcode that comes with # Leopard, /usr/include/ffi/fficonfig.h doesn't define # MACOSX, which causes the build of GLib to fail for at # least some versions of GLib. If we don't find # "#define.*MACOSX" in /usr/include/ffi/fficonfig.h, # explicitly define it. # # While we're at it, suppress -Wformat-nonliteral to # avoid a case where clang's stricter rules on when not # to complain about non-literal format arguments cause # it to complain about code that's safe but it wasn't # told that. See my comment #25 in GNOME bug 691608: # # https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25 # if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h then # It's defined, nothing to do CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 else CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 fi make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 ;; 59|[6-9][0-9]|[1-9][0-9][0-9]) # # 2.59.0 doesn't require Meson and Ninja, but it # supports it, and I'm too lazy to add a dot-dot # version check. # CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MESON _build || exit 1 ninja $MAKE_BUILD_OPTS -C _build || exit 1 $DO_NINJA_INSTALL || exit 1 ;; *) echo "Glib's put out 1000 2.x releases?" 1>&2 ;; esac esac cd .. touch glib-$GLIB_VERSION-done fi } uninstall_glib() { if [ ! -z "$installed_glib_version" ] ; then echo "Uninstalling GLib:" cd glib-$installed_glib_version installed_glib_major_version="`expr $installed_glib_version : '\([0-9][0-9]*\).*'`" installed_glib_minor_version="`expr $installed_glib_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" installed_glib_dotdot_version="`expr $installed_glib_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" installed_glib_major_minor_version=$installed_glib_major_version.$installed_glib_minor_version installed_glib_major_minor_dotdot_version=$installed_glib_major_version.$installed_glib_minor_version.$installed_glib_dotdot_version # # GLib 2.59.1 and later use Meson+Ninja as the build system. # case $installed_glib_major_version in 1) $DO_MAKE_UNINSTALL || exit 1 # # This appears to delete dependencies out from under other # Makefiles in the tree, causing it to fail. At least until # that gets fixed, if it ever gets fixed, we just ignore the # exit status of "make distclean" # # make distclean || exit 1 make distclean || echo "Ignoring make distclean failure" 1>&2 ;; *) case $installed_glib_minor_version in [0-9]|1[0-9]|2[0-9]|3[0-9]|4[0-9]|5[0-8]) $DO_MAKE_UNINSTALL || exit 1 # # This appears to delete dependencies out from under other # Makefiles in the tree, causing it to fail. At least until # that gets fixed, if it ever gets fixed, we just ignore the # exit status of "make distclean" # # make distclean || exit 1 make distclean || echo "Ignoring make distclean failure" 1>&2 ;; 59|[6-9][0-9]|[1-9][0-9][0-9]) # # 2.59.0 doesn't require Meson and Ninja, but it # supports it, and I'm too lazy to add a dot-dot # version check. # $DO_NINJA_UNINSTALL || exit 1 # # For Meson+Ninja, we do the build in an _build # subdirectory, so the equivalent of "make distclean" # is just to remove the directory tree. # rm -rf _build ;; *) echo "Glib's put out 1000 2.x releases?" 1>&2 ;; esac esac cd .. rm glib-$installed_glib_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf glib-$installed_glib_version rm -rf glib-$installed_glib_version.tar.xz fi installed_glib_version="" fi } install_qt() { if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then echo "Downloading and installing Qt:" # # What you get for this URL might just be a 302 Found reply, so use # -L so we get redirected. # # 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg # 5.2.0: qt-mac-opensource-{version}.dmg # 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg # 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg # 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg # 5.15 - 6.0: Offline installers no longer provided. # ( https://download.qt.io/archive/qt/5.15/5.15.0/OFFLINE_README.txt ) # XXX: We need a different approach for QT >= 5.15 # case $QT_MAJOR_VERSION in 1|2|3|4) echo "Qt $QT_VERSION" is too old 1>&2 ;; 5) case $QT_MINOR_VERSION in 0|1|2|3|4|5|6|7|8) echo "Qt $QT_VERSION" is too old 1>&2 ;; 9|10|11|12|13|14) QT_VOLUME=qt-opensource-mac-x64-$QT_VERSION ;; *) echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2 ;; esac [ -f $QT_VOLUME.dmg ] || curl -L -O https://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1 $no_build && echo "Skipping installation" && return sudo hdiutil attach $QT_VOLUME.dmg || exit 1 # # Run the installer executable directly, so that we wait for # it to finish. Then unmount the volume. # /Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME sudo hdiutil detach /Volumes/$QT_VOLUME touch qt-$QT_VERSION-done ;; *) echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2 ;; esac fi } uninstall_qt() { if [ ! -z "$installed_qt_version" ] ; then echo "Uninstalling Qt:" rm -rf $HOME/Qt$installed_qt_version rm qt-$installed_qt_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded version. # # 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg # 5.2.0: qt-mac-opensource-{version}.dmg # 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg # 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg # 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg # installed_qt_major_version="`expr $installed_qt_version : '\([0-9][0-9]*\).*'`" installed_qt_minor_version="`expr $installed_qt_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" installed_qt_dotdot_version="`expr $installed_qt_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`" case $installed_qt_major_version in 1|2|3|4) echo "Qt $installed_qt_version" is too old 1>&2 ;; 5*) case $installed_qt_minor_version in 0|1|2|3|4|5) echo "Qt $installed_qt_version" is too old 1>&2 ;; 6|7|8) installed_qt_volume=qt-opensource-mac-x64-clang-$installed_qt_version.dmg ;; 9|10|11|12|13|14) installed_qt_volume=qt-opensource-mac-x64-$installed_qt_version.dmg ;; esac esac rm -f $installed_qt_volume fi installed_qt_version="" fi } install_libsmi() { if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then echo "Downloading, building, and installing libsmi:" [ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1 cd libsmi-$LIBSMI_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libsmi-$LIBSMI_VERSION-done fi } uninstall_libsmi() { if [ ! -z "$installed_libsmi_version" ] ; then echo "Uninstalling libsmi:" cd libsmi-$installed_libsmi_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libsmi-$installed_libsmi_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libsmi-$installed_libsmi_version rm -rf libsmi-$installed_libsmi_version.tar.gz fi installed_libsmi_version="" fi } install_libgpg_error() { if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then echo "Downloading, building, and installing libgpg-error:" [ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1 cd libgpg-error-$LIBGPG_ERROR_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libgpg-error-$LIBGPG_ERROR_VERSION-done fi } uninstall_libgpg_error() { if [ ! -z "$installed_libgpg_error_version" ] ; then # # libgcrypt depends on this, so uninstall it. # uninstall_libgcrypt "$@" echo "Uninstalling libgpg-error:" cd libgpg-error-$installed_libgpg_error_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libgpg-error-$installed_libgpg_error_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libgpg-error-$installed_libgpg_error_version rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2 fi installed_libgpg_error_version="" fi } install_libgcrypt() { if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then # # libgpg-error is required for libgcrypt. # if [ -z $LIBGPG_ERROR_VERSION ] then echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2 exit 1 fi echo "Downloading, building, and installing libgcrypt:" [ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1 cd libgcrypt-$LIBGCRYPT_VERSION # # The assembler language code is not compatible with the macOS # x86 assembler (or is it an x86-64 vs. x86-32 issue?). # # libgcrypt expects gnu89, not c99/gnu99, semantics for # "inline". See, for example: # # https://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html # CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libgcrypt-$LIBGCRYPT_VERSION-done fi } uninstall_libgcrypt() { if [ ! -z "$installed_libgcrypt_version" ] ; then echo "Uninstalling libgcrypt:" cd libgcrypt-$installed_libgcrypt_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libgcrypt-$installed_libgcrypt_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libgcrypt-$installed_libgcrypt_version rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz fi installed_libgcrypt_version="" fi } install_gmp() { if [ "$GMP_VERSION" -a ! -f gmp-$GMP_VERSION-done ] ; then echo "Downloading, building, and installing GMP:" [ -f gmp-$GMP_VERSION.tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION.tar.lz || exit 1 $no_build && echo "Skipping installation" && return lzip -c -d gmp-$GMP_VERSION.tar.lz | tar xf - || exit 1 cd gmp-$GMP_VERSION # Create a fat binary: https://gmplib.org/manual/Notes-for-Package-Builds.html CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-fat || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gmp-$GMP_VERSION-done fi } uninstall_gmp() { if [ ! -z "$installed_gmp_version" ] ; then # # Nettle depends on this, so uninstall it. # uninstall_nettle "$@" echo "Uninstalling GMP:" cd gmp-$installed_gmp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gmp-$installed_gmp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gmp-$installed_gmp_version rm -rf gmp-$installed_gmp_version.tar.lz fi installed_gmp_version="" fi } install_libtasn1() { if [ "$LIBTASN1_VERSION" -a ! -f libtasn1-$LIBTASN1_VERSION-done ] ; then echo "Downloading, building, and installing libtasn1:" [ -f libtasn1-$LIBTASN1_VERSION.tar.gz ] || curl -L -O https://ftpmirror.gnu.org/libtasn1/libtasn1-$LIBTASN1_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libtasn1-$LIBTASN1_VERSION.tar.gz | tar xf - || exit 1 cd libtasn1-$LIBTASN1_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libtasn1-$LIBTASN1_VERSION-done fi } uninstall_libtasn1() { if [ ! -z "$installed_libtasn1_version" ] ; then # # p11-kit depends on this, so uninstall it. # uninstall_p11_kit "$@" echo "Uninstalling libtasn1:" cd libtasn1-$installed_libtasn1_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libtasn1-$installed_libtasn1_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libtasn1-$installed_libtasn1_version rm -rf libtasn1-$installed_libtasn1_version.tar.gz fi installed_libtasn1_version="" fi } install_p11_kit() { if [ "$P11KIT_VERSION" -a ! -f p11-kit-$P11KIT_VERSION-done ] ; then echo "Downloading, building, and installing p11-kit:" [ -f p11-kit-$P11KIT_VERSION.tar.xz ] || curl -L -O https://github.com/p11-glue/p11-kit/releases/download/$P11KIT_VERSION/p11-kit-$P11KIT_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat p11-kit-$P11KIT_VERSION.tar.xz | tar xf - || exit 1 cd p11-kit-$P11KIT_VERSION # # Prior to Catalina, the libffi that's supplied with macOS # doesn't support ffi_closure_alloc() or ffi_prep_closure_loc(), # both of which are required by p11-kit if built with libffi. # # According to # # https://p11-glue.github.io/p11-glue/p11-kit/manual/devel-building.html # # libffi is used "for sharing of PKCS#11 modules between # multiple callers in the same process. It is highly recommended # that this dependency be treated as a required dependency.", # but it's not clear that this matters to us, so we just # configure p11-kit not to use libffi. # CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libffi --without-trust-paths || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch p11-kit-$P11KIT_VERSION-done fi } uninstall_p11_kit() { if [ ! -z "$installed_p11_kit_version" ] ; then # # Nettle depends on this, so uninstall it. # uninstall_nettle "$@" echo "Uninstalling p11-kit:" cd p11-kit-$installed_p11_kit_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm p11-kit-$installed_p11_kit_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf p11-kit-$installed_p11_kit_version rm -rf p11-kit-$installed_p11_kit_version.tar.xz fi installed_p11_kit_version="" fi } install_nettle() { if [ "$NETTLE_VERSION" -a ! -f nettle-$NETTLE_VERSION-done ] ; then echo "Downloading, building, and installing Nettle:" [ -f nettle-$NETTLE_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat nettle-$NETTLE_VERSION.tar.gz | tar xf - || exit 1 cd nettle-$NETTLE_VERSION if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-assembler || exit 1 else CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 fi make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nettle-$NETTLE_VERSION-done fi } uninstall_nettle() { if [ ! -z "$installed_nettle_version" ] ; then # # GnuTLS depends on this, so uninstall it. # uninstall_gnutls "$@" echo "Uninstalling Nettle:" cd nettle-$installed_nettle_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nettle-$installed_nettle_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nettle-$installed_nettle_version rm -rf nettle-$installed_nettle_version.tar.gz fi installed_nettle_version="" fi } install_gnutls() { if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then # # GnuTLS requires Nettle. # if [ -z $NETTLE_VERSION ] then echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>&2 exit 1 fi echo "Downloading, building, and installing GnuTLS:" if [[ $GNUTLS_MAJOR_VERSION -ge 3 ]] then # # Starting with GnuTLS 3.x, the tarballs are compressed with # xz rather than bzip2. # [ -f gnutls-$GNUTLS_VERSION.tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat gnutls-$GNUTLS_VERSION.tar.xz | tar xf - || exit 1 else [ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1 fi cd gnutls-$GNUTLS_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-included-unistring --disable-guile || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch gnutls-$GNUTLS_VERSION-done fi } uninstall_gnutls() { if [ ! -z "$installed_gnutls_version" ] ; then echo "Uninstalling GnuTLS:" cd gnutls-$installed_gnutls_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm gnutls-$installed_gnutls_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf gnutls-$installed_gnutls_version rm -rf gnutls-$installed_gnutls_version.tar.bz2 fi installed_gnutls_version="" fi } install_lua() { if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then echo "Downloading, building, and installing Lua:" [ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O https://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1 cd lua-$LUA_VERSION make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lua-$LUA_VERSION-done fi } uninstall_lua() { if [ ! -z "$installed_lua_version" ] ; then echo "Uninstalling Lua:" # # Lua has no "make uninstall", so just remove stuff manually. # There's no configure script, so there's no need for # "make distclean", either; just do "make clean". # (cd /usr/local/bin; $DO_RM -f lua luac) (cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp) (cd /usr/local/lib; $DO_RM -f liblua.a) (cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1) cd lua-$installed_lua_version make clean || exit 1 cd .. rm lua-$installed_lua_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf lua-$installed_lua_version rm -rf lua-$installed_lua_version.tar.gz fi installed_lua_version="" fi } install_snappy() { if [ "$SNAPPY_VERSION" -a ! -f snappy-$SNAPPY_VERSION-done ] ; then echo "Downloading, building, and installing snappy:" [ -f snappy-$SNAPPY_VERSION.tar.gz ] || curl -L -o snappy-$SNAPPY_VERSION.tar.gz https://github.com/google/snappy/archive/$SNAPPY_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat snappy-$SNAPPY_VERSION.tar.gz | tar xf - || exit 1 cd snappy-$SNAPPY_VERSION mkdir build_dir cd build_dir # # Build a shared library, because we'll be linking libwireshark, # which is a C library, with libsnappy, and libsnappy is a C++ # library and requires the C++ run time; the shared library # will carry that dependency with it, so linking with it should # Just Work. # MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake -DBUILD_SHARED_LIBS=YES ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch snappy-$SNAPPY_VERSION-done fi } uninstall_snappy() { if [ ! -z "$installed_snappy_version" ] ; then echo "Uninstalling snappy:" cd snappy-$installed_snappy_version # # snappy uses cmake and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 if [ -s build_dir/install_manifest.txt ] ; then while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat build_dir/install_manifest.txt; echo) else $DO_RM -f /usr/local/lib/libsnappy.1.1.8.dylib \ /usr/local/lib/libsnappy.1.dylib \ /usr/local/lib/libsnappy.dylib \ /usr/local/include/snappy-c.h \ /usr/local/include/snappy-sinksource.h \ /usr/local/include/snappy-stubs-public.h \ /usr/local/include/snappy.h \ /usr/local/lib/cmake/Snappy/SnappyConfig.cmake \ /usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake \ /usr/local/lib/cmake/Snappy/SnappyTargets-noconfig.cmake \ /usr/local/lib/cmake/Snappy/SnappyTargets.cmake || exit 1 fi # # snappy uses cmake and doesn't support "make distclean"; #.just remove the entire build directory. # # make distclean || exit 1 rm -rf build_dir || exit 1 cd .. rm snappy-$installed_snappy_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf snappy-$installed_snappy_version rm -rf snappy-$installed_snappy_version.tar.gz fi installed_snappy_version="" fi } install_zstd() { if [ "$ZSTD_VERSION" -a ! -f zstd-$ZSTD_VERSION-done ] ; then echo "Downloading, building, and installing zstd:" [ -f zstd-$ZSTD_VERSION.tar.gz ] || curl -L -O https://github.com/facebook/zstd/releases/download/v$ZSTD_VERSION/zstd-$ZSTD_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat zstd-$ZSTD_VERSION.tar.gz | tar xf - || exit 1 cd zstd-$ZSTD_VERSION make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch zstd-$ZSTD_VERSION-done fi } uninstall_zstd() { if [ ! -z "$installed_zstd_version" ] ; then echo "Uninstalling zstd:" cd zstd-$installed_zstd_version $DO_MAKE_UNINSTALL || exit 1 # # zstd has no configure script, so there's no need for # "make distclean", and the Makefile supplied with it # has no "make distclean" rule; just do "make clean". # make clean || exit 1 cd .. rm zstd-$installed_zstd_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf zstd-$installed_zstd_version rm -rf zstd-$installed_zstd_version.tar.gz fi installed_zstd_version="" fi } install_libxml2() { if [ "$LIBXML2_VERSION" -a ! -f libxml2-$LIBXML2_VERSION-done ] ; then echo "Downloading, building, and installing libxml2:" [ -f libxml2-$LIBXML2_VERSION.tar.gz ] || curl -L -O ftp://xmlsoft.org/libxml2/libxml2-$LIBXML2_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libxml2-$LIBXML2_VERSION.tar.gz | tar xf - || exit 1 cd libxml2-$LIBXML2_VERSION # # At least on macOS 12.0.1 with Xcode 13.1, when we build # libxml2, the linker complains that we don't have the right # to link with the Python framework, so don't build with # Python. # CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-python || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch libxml2-$LIBXML2_VERSION-done fi } uninstall_libxml2() { if [ ! -z "$installed_libxml2_version" ] ; then echo "Uninstalling libxml2:" cd libxml2-$installed_libxml2_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm libxml2-$installed_libxml2_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libxml2-$installed_libxml2_version rm -rf libxml2-$installed_libxml2_version.tar.gz fi installed_libxml2_version="" fi } install_lz4() { if [ "$LZ4_VERSION" -a ! -f lz4-$LZ4_VERSION-done ] ; then echo "Downloading, building, and installing lz4:" # # lz4 switched from sequentially numbered releases, named rN, # to vX.Y.Z-numbered releases. # # The old sequentially-numbered releases were in tarballs # at https://github.com/lz4/lz4/archive/rN.tar.gz, which # extract into an lz4-rN directory. # # THe new vX.Y.Z-numbered releases are in tarballs at # https://github.com/lz4/lz4/archive/vX.Y.Z.tar.gz, which # extract into an lz4-X.Y.Z directory - no, not lz4-vX.Y.Z, # just lz4-X.Y.Z. # # We expect LZ4_VERSION to be set to rN for the sequentially- # numbered releases and X.Y.Z - not vX.Y.Z - for the vX.Y.Z- # numbered releases. We also tell Curl to download the tarball # with a name that corresponds to the name of the target # directory, so that it begins with "lz4-" and ends with either # "rN" or "X.Y.Z", to match what almost all of the other # support libraries do. # if [[ "$LZ4_VERSION" == r* ]] then [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION.tar.gz || exit 1 else [ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/v$LZ4_VERSION.tar.gz || exit 1 fi $no_build && echo "Skipping installation" && return gzcat lz4-$LZ4_VERSION.tar.gz | tar xf - || exit 1 cd lz4-$LZ4_VERSION # # No configure script here, but it appears that if MOREFLAGS is # set, that's added to CFLAGS, and those are combined with LDFLAGS # and CXXFLAGS into FLAGS, which is used when building source # files and libraries. # MOREFLAGS="-D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch lz4-$LZ4_VERSION-done fi } uninstall_lz4() { if [ ! -z "$installed_lz4_version" ] ; then echo "Uninstalling lz4:" cd lz4-$installed_lz4_version $DO_MAKE_UNINSTALL || exit 1 # # lz4's Makefile doesn't support "make distclean"; just do # "make clean". Perhaps not using autotools means that # there's no need for "make distclean". # # make distclean || exit 1 make clean || exit 1 cd .. rm lz4-$installed_lz4_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # # "make install" apparently causes some stuff to be # modified in the build tree, so, as it's done as # root, that leaves stuff owned by root in the build # tree. Therefore, we have to remove the build tree # as root. # sudo rm -rf lz4-$installed_lz4_version rm -rf lz4-$installed_lz4_version.tar.gz fi installed_lz4_version="" fi } install_sbc() { if [ "$SBC_VERSION" -a ! -f sbc-$SBC_VERSION-done ] ; then echo "Downloading, building, and installing sbc:" [ -f sbc-$SBC_VERSION.tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat sbc-$SBC_VERSION.tar.gz | tar xf - || exit 1 cd sbc-$SBC_VERSION if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS -U__ARM_NEON__" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1 else CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1 fi make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch sbc-$SBC_VERSION-done fi } uninstall_sbc() { if [ ! -z "$installed_sbc_version" ] ; then echo "Uninstalling sbc:" cd sbc-$installed_sbc_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm sbc-$installed_sbc_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf sbc-$installed_sbc_version rm -rf sbc-$installed_sbc_version.tar.gz fi installed_sbc_version="" fi } install_maxminddb() { if [ "$MAXMINDDB_VERSION" -a ! -f maxminddb-$MAXMINDDB_VERSION-done ] ; then echo "Downloading, building, and installing MaxMindDB API:" [ -f libmaxminddb-$MAXMINDDB_VERSION.tar.gz ] || curl -L -O https://github.com/maxmind/libmaxminddb/releases/download/$MAXMINDDB_VERSION/libmaxminddb-$MAXMINDDB_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat libmaxminddb-$MAXMINDDB_VERSION.tar.gz | tar xf - || exit 1 cd libmaxminddb-$MAXMINDDB_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch maxminddb-$MAXMINDDB_VERSION-done fi } uninstall_maxminddb() { if [ ! -z "$installed_maxminddb_version" ] ; then echo "Uninstalling MaxMindDB API:" cd libmaxminddb-$installed_maxminddb_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm maxminddb-$installed_maxminddb_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libmaxminddb-$installed_maxminddb_version rm -rf libmaxminddb-$installed_maxminddb_version.tar.gz fi installed_maxminddb_version="" fi } install_c_ares() { if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then echo "Downloading, building, and installing C-Ares API:" [ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O https://c-ares.org/download/c-ares-$CARES_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1 cd c-ares-$CARES_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch c-ares-$CARES_VERSION-done fi } uninstall_c_ares() { if [ ! -z "$installed_cares_version" ] ; then echo "Uninstalling C-Ares API:" cd c-ares-$installed_cares_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm c-ares-$installed_cares_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf c-ares-$installed_cares_version rm -rf c-ares-$installed_cares_version.tar.gz fi installed_cares_version="" fi } install_libssh() { if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then echo "Downloading, building, and installing libssh:" LIBSSH_MAJOR_VERSION="`expr $LIBSSH_VERSION : '\([0-9][0-9]*\).*'`" LIBSSH_MINOR_VERSION="`expr $LIBSSH_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`" LIBSSH_MAJOR_MINOR_VERSION=$LIBSSH_MAJOR_VERSION.$LIBSSH_MINOR_VERSION [ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://www.libssh.org/files/$LIBSSH_MAJOR_MINOR_VERSION/libssh-$LIBSSH_VERSION.tar.xz $no_build && echo "Skipping installation" && return xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1 cd libssh-$LIBSSH_VERSION mkdir build cd build MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake -DWITH_GCRYPT=1 ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch libssh-$LIBSSH_VERSION-done fi } uninstall_libssh() { if [ ! -z "$installed_libssh_version" ] ; then echo "Uninstalling libssh:" cd libssh-$installed_libssh_version # # libssh uses cmake and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 $DO_RM -rf /usr/local/lib/libssh* \ /usr/local/include/libssh \ /usr/local/lib/pkgconfig/libssh* \ /usr/local/lib/cmake/libssh || exit 1 # # libssh uses cmake and doesn't support "make distclean"; # just remove the entire build directory. # # make distclean || exit 1 rm -rf build || exit 1 cd .. rm libssh-$installed_libssh_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf libssh-$installed_libssh_version rm -rf libssh-$installed_libssh_version.tar.gz fi installed_libssh_version="" fi } install_nghttp2() { if [ "$NGHTTP2_VERSION" -a ! -f nghttp2-$NGHTTP2_VERSION-done ] ; then echo "Downloading, building, and installing nghttp2:" [ -f nghttp2-$NGHTTP2_VERSION.tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION/nghttp2-$NGHTTP2_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return xzcat nghttp2-$NGHTTP2_VERSION.tar.xz | tar xf - || exit 1 cd nghttp2-$NGHTTP2_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch nghttp2-$NGHTTP2_VERSION-done fi } uninstall_nghttp2() { if [ ! -z "$installed_nghttp2_version" ] ; then echo "Uninstalling nghttp2:" cd nghttp2-$installed_nghttp2_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm nghttp2-$installed_nghttp2_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf nghttp2-$installed_nghttp2_version rm -rf nghttp2-$installed_nghttp2_version.tar.xz fi installed_nghttp2_version="" fi } install_libtiff() { if [ "$LIBTIFF_VERSION" -a ! -f tiff-$LIBTIFF_VERSION-done ] ; then echo "Downloading, building, and installing libtiff:" [ -f tiff-$LIBTIFF_VERSION.tar.gz ] || curl --fail -L -O https://download.osgeo.org/libtiff/tiff-$LIBTIFF_VERSION.tar.gz || curl --fail -L -O https://download.osgeo.org/libtiff/old/tiff-$LIBTIFF_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat tiff-$LIBTIFF_VERSION.tar.gz | tar xf - || exit 1 cd tiff-$LIBTIFF_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch tiff-$LIBTIFF_VERSION-done fi } uninstall_libtiff() { if [ ! -z "$installed_libtiff_version" ] ; then echo "Uninstalling libtiff:" cd tiff-$installed_libtiff_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm tiff-$installed_libtiff_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf tiff-$installed_libtiff_version rm -rf tiff-$installed_libtiff_version.tar.gz fi installed_libtiff_version="" fi } install_spandsp() { if [ "$SPANDSP_VERSION" -a ! -f spandsp-$SPANDSP_VERSION-done ] ; then echo "Downloading, building, and installing SpanDSP:" [ -f spandsp-$SPANDSP_VERSION.tar.gz ] || curl -L -O https://www.soft-switch.org/downloads/spandsp/spandsp-$SPANDSP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat spandsp-$SPANDSP_VERSION.tar.gz | tar xf - || exit 1 cd spandsp-$SPANDSP_VERSION # # Don't use -Wunused-but-set-variable, as it's not supported # by all the gcc versions in the versions of Xcode that we # support. # patch -p0 <${topdir}/macosx-support-lib-patches/spandsp-configure-patch || exit 1 CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch spandsp-$SPANDSP_VERSION-done fi } uninstall_spandsp() { if [ ! -z "$installed_spandsp_version" ] ; then echo "Uninstalling SpanDSP:" cd spandsp-$installed_spandsp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm spandsp-$installed_spandsp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf spandsp-$installed_spandsp_version rm -rf spandsp-$installed_spandsp_version.tar.gz fi installed_spandsp_version="" fi } install_speexdsp() { if [ "$SPEEXDSP_VERSION" -a ! -f speexdsp-$SPEEXDSP_VERSION-done ] ; then echo "Downloading, building, and installing SpeexDSP:" [ -f speexdsp-$SPEEXDSP_VERSION.tar.gz ] || curl -L -O https://ftp.osuosl.org/pub/xiph/releases/speex/speexdsp-$SPEEXDSP_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat speexdsp-$SPEEXDSP_VERSION.tar.gz | tar xf - || exit 1 cd speexdsp-$SPEEXDSP_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch speexdsp-$SPEEXDSP_VERSION-done fi } uninstall_speexdsp() { if [ ! -z "$installed_speexdsp_version" ] ; then echo "Uninstalling SpeexDSP:" cd speexdsp-$installed_speexdsp_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm speexdsp-$installed_speexdsp_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf speexdsp-$installed_speexdsp_version rm -rf speexdsp-$installed_speexdsp_version.tar.gz fi installed_speexdsp_version="" fi } install_bcg729() { if [ "$BCG729_VERSION" -a ! -f bcg729-$BCG729_VERSION-done ] ; then echo "Downloading, building, and installing bcg729:" [ -f bcg729-$BCG729_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/linphone/plugins/sources/bcg729-$BCG729_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat bcg729-$BCG729_VERSION.tar.gz | tar xf - || exit 1 cd bcg729-$BCG729_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch bcg729-$BCG729_VERSION-done fi } uninstall_bcg729() { if [ ! -z "$installed_bcg729_version" ] ; then echo "Uninstalling bcg729:" cd bcg729-$installed_bcg729_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm bcg729-$installed_bcg729_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf bcg729-$installed_bcg729_version rm -rf bcg729-$installed_bcg729_version.tar.gz fi installed_bcg729_version="" fi } install_ilbc() { if [ -n "$ILBC_VERSION" ] && [ ! -f ilbc-$ILBC_VERSION-done ] ; then echo "Downloading, building, and installing iLBC:" [ -f libilbc-$ILBC_VERSION.tar.bz ] || curl --location --remote-name https://github.com/TimothyGu/libilbc/releases/download/v$ILBC_VERSION/libilbc-$ILBC_VERSION.tar.bz2 || exit 1 $no_build && echo "Skipping installation" && return bzcat libilbc-$ILBC_VERSION.tar.bz2 | tar xf - || exit 1 cd libilbc-$ILBC_VERSION || exit 1 CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch ilbc-$ILBC_VERSION-done fi } uninstall_ilbc() { if [ -n "$installed_ilbc_version" ] ; then echo "Uninstalling iLBC:" cd "libilbc-$installed_ilbc_version" || exit 1 $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm "ilbc-$installed_ilbc_version-done" if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf "libilbc-$installed_ilbc_version" rm -rf "libilbc-$installed_ilbc_version.tar.bz2" fi installed_ilbc_version="" fi } install_opus() { if [ "$OPUS_VERSION" -a ! -f opus-$OPUS_VERSION-done ] ; then echo "Downloading, building, and installing opus:" [ -f opus-$OPUS_VERSION.tar.gz ] || curl -L -O https://archive.mozilla.org/pub/opus/opus-$OPUS_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat opus-$OPUS_VERSION.tar.gz | tar xf - || exit 1 cd opus-$OPUS_VERSION CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd .. touch opus-$OPUS_VERSION-done fi } uninstall_opus() { if [ ! -z "$installed_opus_version" ] ; then echo "Uninstalling opus:" cd opus-$installed_opus_version $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd .. rm opus-$installed_opus_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf opus-$installed_opus_version rm -rf opus-$installed_opus_version.tar.gz fi installed_opus_version="" fi } install_python3() { # The macos11 installer can be deployed to older versions, down to # 10.9 (Mavericks), but is still considered experimental so continue # to use the 64-bit installer (10.9) on earlier releases for now. local macver=x10.9 if [[ $DARWIN_MAJOR_VERSION -gt 19 ]]; then # The macos11 installer is required for Arm-based Macs, which require # macOS 11 Big Sur. Note that the package name is "11.0" (no x) for # 3.9.1 but simply "11" for 3.9.2 (and later) if [[ $PYTHON3_VERSION = 3.9.1 ]]; then macver=11.0 else macver=11 fi fi if [ "$PYTHON3_VERSION" -a ! -f python3-$PYTHON3_VERSION-done ] ; then echo "Downloading and installing python3:" [ -f python-$PYTHON3_VERSION-macos$macver.pkg ] || curl -L -O https://www.python.org/ftp/python/$PYTHON3_VERSION/python-$PYTHON3_VERSION-macos$macver.pkg || exit 1 $no_build && echo "Skipping installation" && return sudo installer -target / -pkg python-$PYTHON3_VERSION-macos$macver.pkg || exit 1 touch python3-$PYTHON3_VERSION-done # # On macOS, the pip3 installed from Python packages appears to # install scripts /Library/Frameworks/Python.framework/Versions/M.N/bin, # where M.N is the major and minor version of Python (the dot-dot # release is irrelevant). # # Strip off any dot-dot component in $PYTHON3_VERSION. # python_version=`echo $PYTHON3_VERSION | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/'` # # Now treat Meson as being in the directory in question. # MESON="/Library/Frameworks/Python.framework/Versions/$python_version/bin/meson" else # # We're using the Python 3 that's in /usr/bin, the pip3 for # which installs scripts in /usr/local/bin, so, when we # install Meson, look for it there. # MESON=/usr/local/bin/meson fi } uninstall_python3() { # Major version (e.g. "3.7") local PYTHON_VERSION=${installed_python3_version%.*} if [ ! -z "$installed_python3_version" ] ; then echo "Uninstalling python3:" frameworkdir="/Library/Frameworks/Python.framework/Versions/$PYTHON_VERSION" sudo rm -rf "$frameworkdir" sudo rm -rf "/Applications/Python $PYTHON_VERSION" sudo find /usr/local/bin -maxdepth 1 -lname "*$frameworkdir/bin/*" -delete # Remove three symlinks and empty directories. Removing directories # might fail if for some reason multiple versions are installed. sudo rm /Library/Frameworks/Python.framework/Headers sudo rm /Library/Frameworks/Python.framework/Python sudo rm /Library/Frameworks/Python.framework/Resources sudo rmdir /Library/Frameworks/Python.framework/Versions sudo rmdir /Library/Frameworks/Python.framework sudo pkgutil --forget org.python.Python.PythonApplications-$PYTHON_VERSION sudo pkgutil --forget org.python.Python.PythonDocumentation-$PYTHON_VERSION sudo pkgutil --forget org.python.Python.PythonFramework-$PYTHON_VERSION sudo pkgutil --forget org.python.Python.PythonUnixTools-$PYTHON_VERSION rm python3-$installed_python3_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -f python-$installed_python3_version-macos11.pkg rm -f python-$installed_python3_version-macos11.0.pkg rm -f python-$installed_python3_version-macosx10.9.pkg rm -f python-$installed_python3_version-macosx10.6.pkg fi installed_python3_version="" fi } install_brotli() { if [ "$BROTLI_VERSION" -a ! -f brotli-$BROTLI_VERSION-done ] ; then echo "Downloading, building, and installing brotli:" [ -f brotli-$BROTLI_VERSION.tar.gz ] || curl -L -o brotli-$BROTLI_VERSION.tar.gz https://github.com/google/brotli/archive/v$BROTLI_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat brotli-$BROTLI_VERSION.tar.gz | tar xf - || exit 1 cd brotli-$BROTLI_VERSION mkdir build_dir cd build_dir MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake ../ || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../.. touch brotli-$BROTLI_VERSION-done fi } uninstall_brotli() { if [ ! -z "$installed_brotli_version" ] ; then echo "Uninstalling brotli:" cd brotli-$installed_brotli_version # # brotli uses cmake on macOS and doesn't support "make uninstall"; # just remove what we know it installs. # # $DO_MAKE_UNINSTALL || exit 1 $DO_RM -rf /usr/local/bin/brotli \ /usr/local/lib/libbrotli* \ /usr/local/include/brotli \ /usr/local/lib/pkgconfig/libbrotli* || exit 1 # # brotli uses cmake on macOS and doesn't support "make distclean"; # just remove the enire build directory. # # make distclean || exit 1 rm -rf build_dir || exit 1 cd .. rm brotli-$installed_brotli_version-done if [ "$#" -eq 1 -a "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf brotli-$installed_brotli_version rm -rf brotli-$installed_brotli_version.tar.gz fi installed_brotli_version="" fi } install_minizip() { if [ "$ZLIB_VERSION" ] && [ ! -f minizip-$ZLIB_VERSION-done ] ; then echo "Downloading, building, and installing zlib for minizip:" [ -f zlib-$ZLIB_VERSION.tar.gz ] || curl -L -o zlib-$ZLIB_VERSION.tar.gz https://zlib.net/zlib-$ZLIB_VERSION.tar.gz || exit 1 $no_build && echo "Skipping installation" && return gzcat zlib-$ZLIB_VERSION.tar.gz | tar xf - || exit 1 # # minizip ships both with a minimal Makefile that doesn't # support "make install", "make uninstall", or "make distclean", # and with a Makefile.am file that, if we do an autoreconf, # gives us a configure script, and a Makefile.in that, if we run # the configure script, gives us a Makefile that supports ll of # those targets, and that installs a pkg-config .pc file for # minizip. # # So that's what we do. # cd zlib-$ZLIB_VERSION/contrib/minizip || exit 1 LIBTOOLIZE=glibtoolize autoreconf --force --install CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1 make $MAKE_BUILD_OPTS || exit 1 $DO_MAKE_INSTALL || exit 1 cd ../../.. touch minizip-$ZLIB_VERSION-done fi } uninstall_minizip() { if [ -n "$installed_minizip_version" ] ; then echo "Uninstalling minizip:" cd zlib-$installed_minizip_version/contrib/minizip $DO_MAKE_UNINSTALL || exit 1 make distclean || exit 1 cd ../../.. rm minizip-$installed_minizip_version-done if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then # # Get rid of the previously downloaded and unpacked version. # rm -rf zlib-$installed_minizip_version rm -rf zlib-$installed_minizip_version.tar.gz fi installed_minizip_version="" fi } install_sparkle() { if [ "$SPARKLE_VERSION" ] && [ ! -f sparkle-$SPARKLE_VERSION-done ] ; then echo "Downloading and installing Sparkle:" # # Download the tarball and unpack it in /usr/local/Sparkle-x.y.z # [ -f Sparkle-$SPARKLE_VERSION.tar.xz ] || curl -L -o Sparkle-$SPARKLE_VERSION.tar.xz https://github.com/sparkle-project/Sparkle/releases/download/$SPARKLE_VERSION/Sparkle-$SPARKLE_VERSION.tar.xz || exit 1 $no_build && echo "Skipping installation" && return test -d "/usr/local/Sparkle-$SPARKLE_VERSION" || sudo mkdir "/usr/local/Sparkle-$SPARKLE_VERSION" sudo tar -C "/usr/local/Sparkle-$SPARKLE_VERSION" -xpof Sparkle-$SPARKLE_VERSION.tar.xz touch sparkle-$SPARKLE_VERSION-done fi } uninstall_sparkle() { if [ -n "$installed_sparkle_version" ]; then echo "Uninstalling Sparkle:" sudo rm -rf "/usr/local/Sparkle-$installed_sparkle_version" if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then rm -f "Sparkle-$installed_sparkle_version.tar.xz" fi installed_sparkle_version="" fi } install_all() { # # Check whether the versions we have installed are the versions # requested; if not, uninstall the installed versions. # if [ ! -z "$installed_brotli_version" -a \ "$installed_brotli_version" != "$BROTLI_VERSION" ] ; then echo "Installed brotli version is $installed_brotli_version" if [ -z "$BROTLI_VERSION" ] ; then echo "brotli is not requested" else echo "Requested brotli version is $BROTLI_VERSION" fi uninstall_brotli -r fi if [ ! -z "$installed_python3_version" -a \ "$installed_python3_version" != "$PYTHON3_VERSION" ] ; then echo "Installed python3 version is $installed_python3_version" if [ -z "$PYTHON3_VERSION" ] ; then echo "python3 is not requested" else echo "Requested python3 version is $PYTHON3_VERSION" fi uninstall_python3 -r fi if [ ! -z "$installed_bcg729_version" -a \ "$installed_bcg729_version" != "$BCG729_VERSION" ] ; then echo "Installed bcg729 version is $installed_bcg729_version" if [ -z "$BCG729_VERSION" ] ; then echo "bcg729 is not requested" else echo "Requested bcg729 version is $BCG729_VERSION" fi uninstall_bcg729 -r fi if [ -n "$installed_ilbc_version" ] \ && [ "$installed_ilbc_version" != "$ILBC_VERSION" ] ; then echo "Installed iLBC version is $installed_ilbc_version" if [ -z "$ILBC_VERSION" ] ; then echo "iLBC is not requested" else echo "Requested iLBC version is $ILBC_VERSION" fi uninstall_ilbc -r fi if [ -n "$installed_opus_version" ] \ && [ "$installed_opus_version" != "$OPUS_VERSION" ] ; then echo "Installed opus version is $installed_opus_version" if [ -z "$OPUS_VERSION" ] ; then echo "opus is not requested" else echo "Requested opus version is $OPUS_VERSION" fi uninstall_opus -r fi if [ ! -z "$installed_spandsp_version" -a \ "$installed_spandsp_version" != "$SPANDSP_VERSION" ] ; then echo "Installed SpanDSP version is $installed_spandsp_version" if [ -z "$SPANDSP_VERSION" ] ; then echo "spandsp is not requested" else echo "Requested SpanDSP version is $SPANDSP_VERSION" fi uninstall_spandsp -r fi if [ ! -z "$installed_speexdsp_version" -a \ "$installed_speexdsp_version" != "$SPEEXDSP_VERSION" ] ; then echo "Installed SpeexDSP version is $installed_speexdsp_version" if [ -z "$SPEEXDSP_VERSION" ] ; then echo "speexdsp is not requested" else echo "Requested SpeexDSP version is $SPEEXDSP_VERSION" fi uninstall_speexdsp -r fi if [ ! -z "$installed_libtiff_version" -a \ "$installed_libtiff_version" != "$LIBTIFF_VERSION" ] ; then echo "Installed libtiff version is $installed_libtiff_version" if [ -z "$LIBTIFF_VERSION" ] ; then echo "libtiff is not requested" else echo "Requested libtiff version is $LIBTIFF_VERSION" fi uninstall_libtiff -r fi if [ ! -z "$installed_nghttp2_version" -a \ "$installed_nghttp2_version" != "$NGHTTP2_VERSION" ] ; then echo "Installed nghttp2 version is $installed_nghttp2_version" if [ -z "$NGHTTP2_VERSION" ] ; then echo "nghttp2 is not requested" else echo "Requested nghttp2 version is $NGHTTP2_VERSION" fi uninstall_nghttp2 -r fi if [ ! -z "$installed_libssh_version" -a \ "$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then echo "Installed libssh version is $installed_libssh_version" if [ -z "$LIBSSH_VERSION" ] ; then echo "libssh is not requested" else echo "Requested libssh version is $LIBSSH_VERSION" fi uninstall_libssh -r fi if [ ! -z "$installed_cares_version" -a \ "$installed_cares_version" != "$CARES_VERSION" ] ; then echo "Installed C-Ares version is $installed_cares_version" if [ -z "$CARES_VERSION" ] ; then echo "C-Ares is not requested" else echo "Requested C-Ares version is $CARES_VERSION" fi uninstall_c_ares -r fi if [ ! -z "$installed_maxminddb_version" -a \ "$installed_maxminddb_version" != "$MAXMINDDB_VERSION" ] ; then echo "Installed MaxMindDB API version is $installed_maxminddb_version" if [ -z "$MAXMINDDB_VERSION" ] ; then echo "MaxMindDB is not requested" else echo "Requested MaxMindDB version is $MAXMINDDB_VERSION" fi uninstall_maxminddb -r fi if [ ! -z "$installed_sbc_version" -a \ "$installed_sbc_version" != "$SBC_VERSION" ] ; then echo "Installed SBC version is $installed_sbc_version" if [ -z "$SBC_VERSION" ] ; then echo "SBC is not requested" else echo "Requested SBC version is $SBC_VERSION" fi uninstall_sbc -r fi if [ ! -z "$installed_lz4_version" -a \ "$installed_lz4_version" != "$LZ4_VERSION" ] ; then echo "Installed LZ4 version is $installed_lz4_version" if [ -z "$LZ4_VERSION" ] ; then echo "LZ4 is not requested" else echo "Requested LZ4 version is $LZ4_VERSION" fi uninstall_lz4 -r fi if [ ! -z "$installed_libxml2_version" -a \ "$installed_libxml2_version" != "$LIBXML2_VERSION" ] ; then echo "Installed libxml2 version is $installed_libxml2_version" if [ -z "$LIBXML2_VERSION" ] ; then echo "libxml2 is not requested" else echo "Requested libxml2 version is $LIBXML2_VERSION" fi uninstall_libxml2 -r fi if [ ! -z "$installed_snappy_version" -a \ "$installed_snappy_version" != "$SNAPPY_VERSION" ] ; then echo "Installed SNAPPY version is $installed_snappy_version" if [ -z "$SNAPPY_VERSION" ] ; then echo "SNAPPY is not requested" else echo "Requested SNAPPY version is $SNAPPY_VERSION" fi uninstall_snappy -r fi if [ ! -z "$installed_lua_version" -a \ "$installed_lua_version" != "$LUA_VERSION" ] ; then echo "Installed Lua version is $installed_lua_version" if [ -z "$LUA_VERSION" ] ; then echo "Lua is not requested" else echo "Requested Lua version is $LUA_VERSION" fi uninstall_lua -r fi if [ ! -z "$installed_gnutls_version" -a \ "$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then echo "Installed GnuTLS version is $installed_gnutls_version" if [ -z "$GNUTLS_VERSION" ] ; then echo "GnuTLS is not requested" else echo "Requested GnuTLS version is $GNUTLS_VERSION" fi uninstall_gnutls -r fi if [ ! -z "$installed_nettle_version" -a \ "$installed_nettle_version" != "$NETTLE_VERSION" ] ; then echo "Installed Nettle version is $installed_nettle_version" if [ -z "$NETTLE_VERSION" ] ; then echo "Nettle is not requested" else echo "Requested Nettle version is $NETTLE_VERSION" fi uninstall_nettle -r fi if [ ! -z "$installed_gmp_version" -a \ "$installed_gmp_version" != "$GMP_VERSION" ] ; then echo "Installed GMP version is $installed_gmp_version" if [ -z "$GMP_VERSION" ] ; then echo "GMP is not requested" else echo "Requested GMP version is $GMP_VERSION" fi uninstall_gmp -r fi if [ ! -z "$installed_p11_kit_version" -a \ "$installed_p11_kit_version" != "$P11KIT_VERSION" ] ; then echo "Installed p11-kit version is $installed_p11_kit_version" if [ -z "$P11KIT_VERSION" ] ; then echo "p11-kit is not requested" else echo "Requested p11-kit version is $P11KIT_VERSION" fi uninstall_p11_kit -r fi if [ ! -z "$installed_libtasn1_version" -a \ "$installed_libtasn1_version" != "$LIBTASN1_VERSION" ] ; then echo "Installed libtasn1 version is $installed_libtasn1_version" if [ -z "$LIBTASN1_VERSION" ] ; then echo "libtasn1 is not requested" else echo "Requested libtasn1 version is $LIBTASN1_VERSION" fi uninstall_libtasn1 -r fi if [ ! -z "$installed_libgcrypt_version" -a \ "$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then echo "Installed libgcrypt version is $installed_libgcrypt_version" if [ -z "$LIBGCRYPT_VERSION" ] ; then echo "libgcrypt is not requested" else echo "Requested libgcrypt version is $LIBGCRYPT_VERSION" fi uninstall_libgcrypt -r fi if [ ! -z "$installed_libgpg_error_version" -a \ "$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then echo "Installed libgpg-error version is $installed_libgpg_error_version" if [ -z "$LIBGPG_ERROR_VERSION" ] ; then echo "libgpg-error is not requested" else echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION" fi uninstall_libgpg_error -r fi if [ ! -z "$installed_libsmi_version" -a \ "$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then echo "Installed libsmi version is $installed_libsmi_version" if [ -z "$LIBSMI_VERSION" ] ; then echo "libsmi is not requested" else echo "Requested libsmi version is $LIBSMI_VERSION" fi uninstall_libsmi -r fi if [ ! -z "$installed_qt_version" -a \ "$installed_qt_version" != "$QT_VERSION" ] ; then echo "Installed Qt version is $installed_qt_version" if [ -z "$QT_VERSION" ] ; then echo "Qt is not requested" else echo "Requested Qt version is $QT_VERSION" fi uninstall_qt -r fi if [ ! -z "$installed_glib_version" -a \ "$installed_glib_version" != "$GLIB_VERSION" ] ; then echo "Installed GLib version is $installed_glib_version" if [ -z "$GLIB_VERSION" ] ; then echo "GLib is not requested" else echo "Requested GLib version is $GLIB_VERSION" fi uninstall_glib -r fi if [ ! -z "$installed_pkg_config_version" -a \ "$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then echo "Installed pkg-config version is $installed_pkg_config_version" if [ -z "$PKG_CONFIG_VERSION" ] ; then echo "pkg-config is not requested" else echo "Requested pkg-config version is $PKG_CONFIG_VERSION" fi uninstall_pkg_config -r fi if [ ! -z "$installed_gettext_version" -a \ "$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then echo "Installed GNU gettext version is $installed_gettext_version" if [ -z "$GETTEXT_VERSION" ] ; then echo "GNU gettext is not requested" else echo "Requested GNU gettext version is $GETTEXT_VERSION" fi uninstall_gettext -r fi if [ ! -z "$installed_ninja_version" -a \ "$installed_ninja_version" != "$NINJA_VERSION" ] ; then echo "Installed Ninja version is $installed_ninja_version" if [ -z "$NINJA_VERSION" ] ; then echo "Ninja is not requested" else echo "Requested Ninja version is $NINJA_VERSION" fi uninstall_ninja -r fi if [ ! -z "$installed_asciidoctorpdf_version" -a \ "$installed_asciidoctorpdf_version" != "$ASCIIDOCTORPDF_VERSION" ] ; then echo "Installed Asciidoctor-pdf version is $installed_asciidoctorpdf_version" if [ -z "$ASCIIDOCTORPDF_VERSION" ] ; then echo "Asciidoctor-pdf is not requested" else echo "Requested Asciidoctor-pdf version is $ASCIIDOCTORPDF_VERSION" fi # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_asciidoctorpdf -r fi if [ ! -z "$installed_asciidoctor_version" -a \ "$installed_asciidoctor_version" != "$ASCIIDOCTOR_VERSION" ] ; then echo "Installed Asciidoctor version is $installed_asciidoctor_version" if [ -z "$ASCIIDOCTOR_VERSION" ] ; then echo "Asciidoctor is not requested" else echo "Requested Asciidoctor version is $ASCIIDOCTOR_VERSION" fi # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_asciidoctor -r fi if [ ! -z "$installed_cmake_version" -a \ "$installed_cmake_version" != "$CMAKE_VERSION" ] ; then echo "Installed CMake version is $installed_cmake_version" if [ -z "$CMAKE_VERSION" ] ; then echo "CMake is not requested" else echo "Requested CMake version is $CMAKE_VERSION" fi uninstall_cmake -r fi if [ ! -z "$installed_libtool_version" -a \ "$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then echo "Installed GNU libtool version is $installed_libtool_version" if [ -z "$LIBTOOL_VERSION" ] ; then echo "GNU libtool is not requested" else echo "Requested GNU libtool version is $LIBTOOL_VERSION" fi uninstall_libtool -r fi if [ ! -z "$installed_automake_version" -a \ "$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then echo "Installed GNU automake version is $installed_automake_version" if [ -z "$AUTOMAKE_VERSION" ] ; then echo "GNU automake is not requested" else echo "Requested GNU automake version is $AUTOMAKE_VERSION" fi uninstall_automake -r fi if [ ! -z "$installed_autoconf_version" -a \ "$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then echo "Installed GNU autoconf version is $installed_autoconf_version" if [ -z "$AUTOCONF_VERSION" ] ; then echo "GNU autoconf is not requested" else echo "Requested GNU autoconf version is $AUTOCONF_VERSION" fi uninstall_autoconf -r fi if [ ! -z "$installed_pcre_version" -a \ "$installed_pcre_version" != "$PCRE_VERSION" ] ; then echo "Installed pcre version is $installed_pcre_version" if [ -z "$PCRE_VERSION" ] ; then echo "pcre is not requested" else echo "Requested pcre version is $PCRE_VERSION" fi uninstall_pcre -r fi if [ -n "$installed_pcre2_version" -a \ "$installed_pcre2_version" != "$PCRE2_VERSION" ] ; then echo "Installed pcre2 version is $installed_pcre2_version" if [ -z "$PCRE2_VERSION" ] ; then echo "pcre2 is not requested" else echo "Requested pcre2 version is $PCRE2_VERSION" fi uninstall_pcre2 -r fi if [ ! -z "$installed_lzip_version" -a \ "$installed_lzip_version" != "$LZIP_VERSION" ] ; then echo "Installed lzip version is $installed_lzip_version" if [ -z "$LZIP_VERSION" ] ; then echo "lzip is not requested" else echo "Requested lzip version is $LZIP_VERSION" fi uninstall_lzip -r fi if [ ! -z "$installed_xz_version" -a \ "$installed_xz_version" != "$XZ_VERSION" ] ; then echo "Installed xz version is $installed_xz_version" if [ -z "$XZ_VERSION" ] ; then echo "xz is not requested" else echo "Requested xz version is $XZ_VERSION" fi uninstall_xz -r fi if [ ! -z "$installed_curl_version" -a \ "$installed_curl_version" != "$CURL_VERSION" ] ; then echo "Installed curl version is $installed_curl_version" if [ -z "$CURL_VERSION" ] ; then echo "curl is not requested" else echo "Requested curl version is $CURL_VERSION" fi uninstall_curl -r fi if [ ! -z "$installed_minizip_version" -a \ "$installed_minizip_version" != "$ZLIB_VERSION" ] ; then echo "Installed minizip (zlib) version is $installed_minizip_version" if [ -z "$ZLIB_VERSION" ] ; then echo "minizip is not requested" else echo "Requested minizip (zlib) version is $ZLIB_VERSION" fi uninstall_minizip -r fi if [ ! -z "$installed_sparkle_version" -a \ "$installed_sparkle_version" != "$SPARKLE_VERSION" ] ; then echo "Installed Sparkle version is $installed_sparkle_version" if [ -z "$SPARKLE_VERSION" ] ; then echo "Sparkle is not requested" else echo "Requested Sparkle version is $SPARKLE_VERSION" fi uninstall_sparkle -r fi # # Start with curl: we may need it to download and install xz. # install_curl # # Now intall xz: it is the sole download format of glib later than 2.31.2. # install_xz install_lzip install_pcre install_autoconf install_automake install_libtool install_cmake install_pcre2 # # Install Python 3 now; not only is it needed for the Wireshark # build process, it's also needed for the Meson build system, # which newer versions of GLib use as their build system. # install_python3 # # Now install Meson. # install_meson install_ninja install_asciidoctor install_asciidoctorpdf # # Start with GNU gettext; GLib requires it, and macOS doesn't have it # or a BSD-licensed replacement. # # At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2 # by default, which causes, for example, stpncpy to be defined as # a hairy macro that collides with the GNU gettext configure script's # attempts to workaround AIX's lack of a declaration for stpncpy, # with the result being a huge train wreck. Define _FORTIFY_SOURCE # as 0 in an attempt to keep the trains on separate tracks. # install_gettext # # GLib depends on pkg-config. # By default, pkg-config depends on GLib; we break the dependency cycle # by configuring pkg-config to use its own internal version of GLib. # install_pkg_config install_glib # # Now we have reached a point where we can build everything but # the GUI (Wireshark). # install_qt # # Now we have reached a point where we can build everything including # the GUI (Wireshark), but not with any optional features such as # SNMP OID resolution, some forms of decryption, Lua scripting, playback # of audio, or MaxMindDB mapping of IP addresses. # # We now conditionally download optional libraries to support them; # the default is to download them all. # install_libsmi install_libgpg_error install_libgcrypt install_gmp install_libtasn1 install_p11_kit install_nettle install_gnutls install_lua install_snappy install_zstd install_libxml2 install_lz4 install_sbc install_maxminddb install_c_ares install_libssh install_nghttp2 install_libtiff install_spandsp install_speexdsp install_bcg729 install_ilbc install_opus install_brotli install_minizip install_sparkle } uninstall_all() { if [ -d "${MACOSX_SUPPORT_LIBS}" ] then cd "${MACOSX_SUPPORT_LIBS}" # # Uninstall items in the reverse order from the order in which they're # installed. Only uninstall if the download/build/install process # completed; uninstall the version that appears in the name of # the -done file. # # We also do a "make distclean", so that we don't have leftovers from # old configurations. # uninstall_sparkle uninstall_minizip uninstall_brotli uninstall_opus uninstall_ilbc uninstall_bcg729 uninstall_speexdsp uninstall_spandsp uninstall_libtiff uninstall_nghttp2 uninstall_libssh uninstall_c_ares uninstall_maxminddb uninstall_snappy uninstall_zstd uninstall_libxml2 uninstall_lz4 uninstall_sbc uninstall_lua uninstall_gnutls uninstall_nettle uninstall_p11_kit uninstall_libtasn1 uninstall_gmp uninstall_libgcrypt uninstall_libgpg_error uninstall_libsmi uninstall_qt uninstall_glib uninstall_pkg_config uninstall_gettext uninstall_ninja # # XXX - really remove this? # Or should we remember it as installed only if this script # installed it? # uninstall_asciidoctorpdf uninstall_asciidoctor uninstall_meson uninstall_python3 uninstall_cmake uninstall_libtool uninstall_automake uninstall_autoconf uninstall_pcre uninstall_lzip uninstall_xz uninstall_curl fi } # # Do we have permission to write in /usr/local? # # If so, assume we have permission to write in its subdirectories. # (If that's not the case, this test needs to check the subdirectories # as well.) # # If not, do "make install", "make uninstall", "ninja install", # "ninja uninstall", the removes for dependencies that don't support # "make uninstall" or "ninja uninstall", the renames of [g]libtool*, # and the writing of a libffi .pc file with sudo. # if [ -w /usr/local ] then DO_MAKE_INSTALL="make install" DO_MAKE_UNINSTALL="make uninstall" DO_NINJA_INSTALL="ninja -C _build install" DO_NINJA_UNINSTALL="ninja -C _build uninstall" DO_TEE_TO_PC_FILE="tee" DO_RM="rm" DO_MV="mv" else DO_MAKE_INSTALL="sudo make install" DO_MAKE_UNINSTALL="sudo make uninstall" DO_NINJA_INSTALL="sudo ninja -C _build install" DO_NINJA_UNINSTALL="sudo ninja -C _build uninstall" DO_TEE_TO_PC_FILE="sudo tee" DO_RM="sudo rm" DO_MV="sudo mv" fi # This script is meant to be run in the source root. The following # code will attempt to get you there, but is not perfect (particulary # if someone copies the script). topdir=`pwd`/`dirname $0`/.. cd $topdir # Preference of the support libraries directory: # ${MACOSX_SUPPORT_LIBS} # ../macosx-support-libs # ./macosx-support-libs (default if none exists) if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]; then unset MACOSX_SUPPORT_LIBS fi if [ -d ../macosx-support-libs ]; then MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-../macosx-support-libs} else MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-./macosx-support-libs} fi # # If we have SDKs available, the default target OS is the major version # of the one we're running; get that and strip off the third component # if present. # for i in /Developer/SDKs \ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ /Library/Developer/CommandLineTools/SDKs do if [ -d "$i" ] then min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'` break fi done # # Parse command-line flags: # # -h - print help. # -t - build libraries so that they'll work on the specified # version of macOS and later versions. # -u - do an uninstall. # -n - download all packages, but don't build or install. # no_build=false while getopts ht:un name do case $name in u) do_uninstall=yes ;; n) no_build=true ;; t) min_osx_target="$OPTARG" ;; h|?) echo "Usage: macos-setup.sh [ -t ] [ -u ] [ -n ]" 1>&1 exit 0 ;; esac done # # Get the version numbers of installed packages, if any. # if [ -d "${MACOSX_SUPPORT_LIBS}" ] then cd "${MACOSX_SUPPORT_LIBS}" installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'` installed_lzip_version=`ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/'` installed_pcre_version=`ls pcre-*-done 2>/dev/null | sed 's/pcre-\(.*\)-done/\1/'` installed_pcre2_version=$(ls pcre2-*-done 2>/dev/null | sed 's/pcre2-\(.*\)-done/\1/') installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'` installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'` installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'` installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'` installed_ninja_version=`ls ninja-*-done 2>/dev/null | sed 's/ninja-\(.*\)-done/\1/'` installed_asciidoctor_version=`ls asciidoctor-*-done 2>/dev/null | sed 's/asciidoctor-\(.*\)-done/\1/'` installed_asciidoctorpdf_version=`ls asciidoctorpdf-*-done 2>/dev/null | sed 's/asciidoctorpdf-\(.*\)-done/\1/'` installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'` installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'` installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'` installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'` installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'` installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'` installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'` installed_gmp_version=`ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/'` installed_libtasn1_version=`ls libtasn1-*-done 2>/dev/null | sed 's/libtasn1-\(.*\)-done/\1/'` installed_p11_kit_version=`ls p11-kit-*-done 2>/dev/null | sed 's/p11-kit-\(.*\)-done/\1/'` installed_nettle_version=`ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/'` installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'` installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'` installed_snappy_version=`ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/'` installed_zstd_version=`ls zstd-*-done 2>/dev/null | sed 's/zstd-\(.*\)-done/\1/'` installed_libxml2_version=`ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/'` installed_lz4_version=`ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/'` installed_sbc_version=`ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/'` installed_maxminddb_version=`ls maxminddb-*-done 2>/dev/null | sed 's/maxminddb-\(.*\)-done/\1/'` installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'` installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'` installed_nghttp2_version=`ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/'` installed_libtiff_version=`ls tiff-*-done 2>/dev/null | sed 's/tiff-\(.*\)-done/\1/'` installed_spandsp_version=`ls spandsp-*-done 2>/dev/null | sed 's/spandsp-\(.*\)-done/\1/'` installed_speexdsp_version=`ls speexdsp-*-done 2>/dev/null | sed 's/speexdsp-\(.*\)-done/\1/'` installed_bcg729_version=`ls bcg729-*-done 2>/dev/null | sed 's/bcg729-\(.*\)-done/\1/'` installed_ilbc_version=`ls ilbc-*-done 2>/dev/null | sed 's/ilbc-\(.*\)-done/\1/'` installed_opus_version=`ls opus-*-done 2>/dev/null | sed 's/opus-\(.*\)-done/\1/'` installed_python3_version=`ls python3-*-done 2>/dev/null | sed 's/python3-\(.*\)-done/\1/'` installed_brotli_version=`ls brotli-*-done 2>/dev/null | sed 's/brotli-\(.*\)-done/\1/'` installed_minizip_version=`ls minizip-*-done 2>/dev/null | sed 's/minizip-\(.*\)-done/\1/'` installed_sparkle_version=`ls sparkle-*-done 2>/dev/null | sed 's/sparkle-\(.*\)-done/\1/'` cd $topdir fi if [ "$do_uninstall" = "yes" ] then uninstall_all exit 0 fi # # Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if # invoked without CFLAGS or CXXFLAGS being set in the environment. # # However, we *are* setting them in the environment, for our own # nefarious purposes, so start them out as "-g -O2". # CFLAGS="-g -O2" CXXFLAGS="-g -O2" # if no make options are present, set default options if [ -z "$MAKE_BUILD_OPTS" ] ; then # by default use 1.5x number of cores for parallel build MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))" fi # # If we have a target release, look for the oldest SDK that's for an # OS equal to or later than that one, and build libraries against it # rather than against the headers and, more importantly, libraries # that come with the OS, so that we don't end up with support libraries # that only work on the OS version on which we built them, not earlier # versions of the same release, or earlier releases if the minimum is # earlier. # if [ ! -z "$min_osx_target" ] then # # Get the major and minor version of the target release. # We assume it'll be a while before there's a macOS 100. :-) # case "$min_osx_target" in [1-9][0-9].*) # # major.minor. # min_osx_target_major=`echo "$min_osx_target" | sed -n 's/\([1-9][0-9]*\)\..*/\1/p'` min_osx_target_minor=`echo "$min_osx_target" | sed -n 's/[1-9][0-9]*\.\(.*\)/\1/p'` ;; [1-9][0-9]) # # Just a major version number was specified; make the minor # version 0. # min_osx_target_major="$min_osx_target" min_osx_target_minor=0 ;; *) echo "macosx-setup.sh: Invalid target release $min_osx_target" 1>&2 exit 1 ;; esac # # Search each directory that might contain SDKs. # sdkpath="" for sdksdir in /Developer/SDKs \ /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \ /Library/Developer/CommandLineTools/SDKs do # # Get a list of all the SDKs. # if ! test -d "$sdksdir" then # # There is no directory with that name. # Move on to the next one in the list, if any. # continue fi # # Get a list of all the SDKs in that directory, if any. # We assume it'll be a while before there's a macOS 100. :-) # sdklist=`(cd "$sdksdir"; ls -d MacOSX[1-9][0-9].[0-9]*.sdk 2>/dev/null)` for sdk in $sdklist do # # Get the major and minor version for this SDK. # sdk_major=`echo "$sdk" | sed -n 's/MacOSX\([1-9][0-9]*\)\..*\.sdk/\1/p'` sdk_minor=`echo "$sdk" | sed -n 's/MacOSX[1-9][0-9]*\.\(.*\)\.sdk/\1/p'` # # Is it for the deployment target or some later release? # Starting with major 11, the minor version no longer matters. # if test "$sdk_major" -gt "$min_osx_target_major" -o \ \( "$sdk_major" -eq "$min_osx_target_major" -a \ \( "$sdk_major" -ge 11 -o \ "$sdk_minor" -ge "$min_osx_target_minor" \) \) then # # Yes, use it. # sdkpath="$sdksdir/$sdk" break 2 fi done done if [ -z "$sdkpath" ] then echo "macos-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later" 1>&2 exit 1 fi SDKPATH="$sdkpath" echo "Using the $sdk_major.$sdk_minor SDK" # # Make sure there are links to /usr/local/include and /usr/local/lib # in the SDK's usr/local. # if [ ! -e $SDKPATH/usr/local/include ] then if [ ! -d $SDKPATH/usr/local ] then sudo mkdir $SDKPATH/usr/local fi sudo ln -s /usr/local/include $SDKPATH/usr/local/include fi if [ ! -e $SDKPATH/usr/local/lib ] then if [ ! -d $SDKPATH/usr/local ] then sudo mkdir $SDKPATH/usr/local fi sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib fi # # Set the minimum OS version for which to build to the specified # minimum target OS version, so we don't, for example, end up using # linker features supported by the OS verson on which we're building # but not by the target version. # VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target" # # Compile and link against the SDK. # SDKFLAGS="-isysroot $SDKPATH" fi export CFLAGS export CXXFLAGS # # You need Xcode or the command-line tools installed to get the compilers (xcrun checks both). # if [ ! -x /usr/bin/xcrun ]; then echo "Please install Xcode (app or command line) first (should be available on DVD or from the Mac App Store)." exit 1 fi if [ "$QT_VERSION" ]; then # # We need Xcode, not just the command-line tools, installed to build # Qt. # # At least with Xcode 8, /usr/bin/xcodebuild --help fails if only # the command-line tools are installed and succeeds if Xcode is # installed. Unfortunately, it fails *with* Xcode 3, but # /usr/bin/xcodebuild -version works with that and with Xcode 8. # Hopefully it fails with only the command-line tools installed. # if /usr/bin/xcodebuild -version >/dev/null 2>&1; then : elif qmake --version >/dev/null 2>&1; then : else echo "Please install Xcode first (should be available on DVD or from the Mac App Store)." echo "The command-line build tools are not sufficient to build Qt." echo "Alternatively build QT according to: https://gist.github.com/shoogle/750a330c851bd1a924dfe1346b0b4a08#:~:text=MacOS%2FQt%5C%20Creator-,Go%20to%20Qt%20Creator%20%3E%20Preferences%20%3E%20Build%20%26%20Run%20%3E%20Kits,for%20both%20compilers%2C%20not%20gcc%20." exit 1 fi fi export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig # # Do all the downloads and untarring in a subdirectory, so all that # stuff can be removed once we've installed the support libraries. if [ ! -d "${MACOSX_SUPPORT_LIBS}" ] then mkdir "${MACOSX_SUPPORT_LIBS}" || exit 1 fi cd "${MACOSX_SUPPORT_LIBS}" install_all echo "" # # Indicate what paths to use for pkg-config and cmake. # pkg_config_path=/usr/local/lib/pkgconfig if [ "$QT_VERSION" ]; then qt_base_path=$HOME/Qt$QT_VERSION/$QT_VERSION/clang_64 pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig" CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake" fi if $no_build; then echo "All required dependencies downloaded. Run without -n to install them." exit 0 fi echo "You are now prepared to build Wireshark." echo echo "To build:" echo echo "export PKG_CONFIG_PATH=$pkg_config_path" echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH" echo "export PATH=$PATH:$qt_base_path/bin" echo echo "mkdir build; cd build" if [ ! -z "$NINJA_VERSION" ]; then echo "cmake -G Ninja .." echo "ninja wireshark_app_bundle logray_app_bundle # (Modify as needed)" echo "ninja install/strip" else echo "cmake .." echo "make $MAKE_BUILD_OPTS wireshark_app_bundle logray_app_bundle # (Modify as needed)" echo "make install/strip" fi echo echo "Make sure you are allowed capture access to the network devices" echo "See: https://gitlab.com/wireshark/wireshark/-/wikis/CaptureSetup/CapturePrivileges" echo exit 0