wireshark/ui/qt/voip_calls_dialog.cpp

545 lines
18 KiB
C++
Raw Normal View History

/* voip_calls_dialog.cpp
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#include "voip_calls_dialog.h"
#include <ui_voip_calls_dialog.h>
#include "file.h"
#include "epan/addr_resolv.h"
#include "epan/dissectors/packet-h225.h"
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
#include "ui/rtp_stream.h"
#include <ui/qt/utils/qt_ui_utils.h>
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
#include "rtp_player_dialog.h"
#include "sequence_dialog.h"
#include <ui/qt/utils/stock_icon.h>
#include "wireshark_application.h"
#include <ui/qt/models/voip_calls_info_model.h>
#include <QClipboard>
#include <QContextMenuEvent>
#include <QPushButton>
// To do:
// - More context menu items
// - Don't select on right click
// - Player
// - Add a screenshot to the user's guide
// - Add filter for quickly searching through list?
// Bugs:
// - Preparing a filter overwrites the existing filter. The GTK+ UI appends.
// We'll probably have to add an "append" parameter to MainWindow::filterPackets.
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
enum { voip_calls_type_ = 1000 };
VoipCallsDialog::VoipCallsDialog(QWidget &parent, CaptureFile &cf, bool all_flows) :
WiresharkDialog(parent, cf),
ui(new Ui::VoipCallsDialog),
parent_(parent),
voip_calls_tap_listeners_removed_(false)
{
ui->setupUi(this);
loadGeometry(parent.width() * 4 / 5, parent.height() * 2 / 3);
// Create the model that stores the actual data and the proxy model that is
// responsible for sorting and filtering data in the display.
call_infos_model_ = new VoipCallsInfoModel(this);
cache_model_ = new CacheProxyModel(this);
cache_model_->setSourceModel(call_infos_model_);
sorted_model_ = new VoipCallsInfoSortedModel(this);
sorted_model_->setSourceModel(cache_model_);
ui->callTreeView->setModel(sorted_model_);
connect(ui->callTreeView->selectionModel(), SIGNAL(selectionChanged(QItemSelection,QItemSelection)),
this, SLOT(updateWidgets()));
ui->callTreeView->sortByColumn(VoipCallsInfoModel::StartTime, Qt::AscendingOrder);
setWindowSubtitle(all_flows ? tr("SIP Flows") : tr("VoIP Calls"));
prepare_button_ = ui->buttonBox->addButton(tr("Prepare Filter"), QDialogButtonBox::ApplyRole);
sequence_button_ = ui->buttonBox->addButton(tr("Flow Sequence"), QDialogButtonBox::ApplyRole);
player_button_ = RtpPlayerDialog::addPlayerButton(ui->buttonBox);
connect (ui->todCheckBox, &QAbstractButton::toggled, this, &VoipCallsDialog::switchTimeOfDay);
copy_button_ = ui->buttonBox->addButton(tr("Copy"), QDialogButtonBox::ApplyRole);
QMenu *copy_menu = new QMenu(copy_button_);
QAction *ca;
ca = copy_menu->addAction(tr("as CSV"));
connect(ca, SIGNAL(triggered()), this, SLOT(copyAsCSV()));
ca = copy_menu->addAction(tr("as YAML"));
connect(ca, SIGNAL(triggered()), this, SLOT(copyAsYAML()));
copy_button_->setMenu(copy_menu);
memset (&tapinfo_, 0, sizeof(tapinfo_));
tapinfo_.tap_packet = tapPacket;
tapinfo_.tap_draw = tapDraw;
tapinfo_.tap_data = this;
tapinfo_.callsinfos = g_queue_new();
tapinfo_.h225_cstype = H225_OTHER;
tapinfo_.fs_option = all_flows ? FLOW_ALL : FLOW_ONLY_INVITES; /* flow show option */
tapinfo_.graph_analysis = sequence_analysis_info_new();
tapinfo_.graph_analysis->name = "voip";
sequence_info_ = new SequenceInfo(tapinfo_.graph_analysis);
voip_calls_init_all_taps(&tapinfo_);
updateWidgets();
if (cap_file_.isValid()) {
tapinfo_.session = cap_file_.capFile()->epan;
cap_file_.delayedRetapPackets();
}
}
VoipCallsDialog::~VoipCallsDialog()
{
delete ui;
voip_calls_reset_all_taps(&tapinfo_);
if (!voip_calls_tap_listeners_removed_) {
voip_calls_remove_all_tap_listeners(&tapinfo_);
voip_calls_tap_listeners_removed_ = true;
}
sequence_info_->unref();
g_queue_free(tapinfo_.callsinfos);
}
void VoipCallsDialog::removeTapListeners()
{
if (!voip_calls_tap_listeners_removed_) {
voip_calls_remove_all_tap_listeners(&tapinfo_);
voip_calls_tap_listeners_removed_ = true;
}
WiresharkDialog::removeTapListeners();
}
void VoipCallsDialog::captureFileClosing()
{
// The time formatting is currently provided by VoipCallsInfoModel, but when
// the cache is active, the ToD cannot be modified.
ui->todCheckBox->setEnabled(false);
cache_model_->setSourceModel(NULL);
if (!voip_calls_tap_listeners_removed_) {
voip_calls_remove_all_tap_listeners(&tapinfo_);
voip_calls_tap_listeners_removed_ = true;
}
tapinfo_.session = NULL;
WiresharkDialog::captureFileClosing();
}
void VoipCallsDialog::contextMenuEvent(QContextMenuEvent *event)
{
bool selected = ui->callTreeView->selectionModel()->hasSelection();
if (! selected)
return;
QMenu popupMenu;
QAction * action = popupMenu.addAction(tr("Select &All"), this, SLOT(selectAll()));
action->setToolTip(tr("Select all calls"));
popupMenu.addSeparator();
action = popupMenu.addAction(tr("Display time as time of day"), this, SLOT(switchTimeOfDay()));
action->setCheckable(true);
action->setChecked(call_infos_model_->timeOfDay());
popupMenu.addSeparator();
action = popupMenu.addAction(tr("Copy as CSV"), this, SLOT(copyAsCSV()));
action->setToolTip(tr("Copy stream list as CSV."));
action = popupMenu.addAction(tr("Copy as YAML"), this, SLOT(copyAsYAML()));
action->setToolTip(tr("Copy stream list as YAML."));
popupMenu.exec(event->globalPos());
}
void VoipCallsDialog::changeEvent(QEvent *event)
{
if (0 != event)
{
switch (event->type())
{
case QEvent::LanguageChange:
ui->retranslateUi(this);
break;
default:
break;
}
}
QDialog::changeEvent(event);
}
//void VoipCallsDialog::tapReset(void *)
//{
// voip_calls_tapinfo_t *tapinfo = (voip_calls_tapinfo_t *) tapinfo_ptr;
//}
tap_packet_status VoipCallsDialog::tapPacket(void *, packet_info *, epan_dissect_t *, const void *)
{
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
#ifdef QT_MULTIMEDIA_LIB
// voip_calls_tapinfo_t *tapinfo = (voip_calls_tapinfo_t *) tapinfo_ptr;
// add_rtp_packet for voip player.
// return TAP_PACKET_REDRAW;
#endif
return TAP_PACKET_DONT_REDRAW;
}
void VoipCallsDialog::tapDraw(void *tapinfo_ptr)
{
voip_calls_tapinfo_t *tapinfo = static_cast<voip_calls_tapinfo_t *>(tapinfo_ptr);
if (!tapinfo || !tapinfo->redraw) {
return;
}
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
GList *graph_item = g_queue_peek_nth_link(tapinfo->graph_analysis->items, 0);
for (; graph_item; graph_item = gxx_list_next(graph_item)) {
for (GList *rsi_entry = g_list_first(tapinfo->rtpstream_list); rsi_entry; rsi_entry = gxx_list_next(rsi_entry)) {
seq_analysis_item_t * sai = gxx_list_data(seq_analysis_item_t *, graph_item);
rtpstream_info_t *rsi = gxx_list_data(rtpstream_info_t *, rsi_entry);
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
if (rsi->start_fd->num == sai->frame_number) {
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
rsi->call_num = sai->conv_num;
// VOIP_CALLS_DEBUG("setting conv num %u for frame %u", sai->conv_num, sai->frame_number);
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
}
}
}
VoipCallsDialog *voip_calls_dialog = static_cast<VoipCallsDialog *>(tapinfo->tap_data);
if (voip_calls_dialog) {
voip_calls_dialog->updateCalls();
}
}
void VoipCallsDialog::updateCalls()
{
ui->callTreeView->setSortingEnabled(false);
// Add any missing items
call_infos_model_->updateCalls(tapinfo_.callsinfos);
// Resize columns
for (int i = 0; i < call_infos_model_->columnCount(); i++) {
ui->callTreeView->resizeColumnToContents(i);
}
ui->callTreeView->setSortingEnabled(true);
updateWidgets();
}
void VoipCallsDialog::updateWidgets()
{
bool selected = ui->callTreeView->selectionModel()->hasSelection();
bool have_ga_items = false;
if (tapinfo_.graph_analysis && tapinfo_.graph_analysis->items) {
have_ga_items = true;
}
prepare_button_->setEnabled(selected && have_ga_items);
sequence_button_->setEnabled(selected && have_ga_items);
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
#if defined(QT_MULTIMEDIA_LIB)
player_button_->setEnabled(selected && have_ga_items);
#else
player_button_->setEnabled(false);
player_button_->setText(tr("No Audio"));
#endif
}
void VoipCallsDialog::prepareFilter()
{
if (!ui->callTreeView->selectionModel()->hasSelection() || !tapinfo_.graph_analysis) {
return;
}
QString filter_str;
QSet<guint16> selected_calls;
QString frame_numbers;
QList<int> rows;
/* Build a new filter based on frame numbers */
foreach (QModelIndex index, ui->callTreeView->selectionModel()->selectedIndexes()) {
if (index.isValid() && ! rows.contains(index.row()))
{
voip_calls_info_t *call_info = VoipCallsInfoModel::indexToCallInfo(index);
if (!call_info) {
return;
}
selected_calls << call_info->call_num;
rows << index.row();
}
}
GList *cur_ga_item = g_queue_peek_nth_link(tapinfo_.graph_analysis->items, 0);
while (cur_ga_item && cur_ga_item->data) {
seq_analysis_item_t *ga_item = gxx_list_data(seq_analysis_item_t*, cur_ga_item);
if (selected_calls.contains(ga_item->conv_num)) {
frame_numbers += QString("%1 ").arg(ga_item->frame_number);
}
cur_ga_item = gxx_list_next(cur_ga_item);
}
if (!frame_numbers.isEmpty()) {
frame_numbers.chop(1);
filter_str = QString("frame.number in {%1} or rtp.setup-frame in {%1}").arg(frame_numbers);
}
#if 0
// XXX The GTK+ UI falls back to building a filter based on protocols if the filter
// length is too long. Leaving this here for the time being in case we need to do
// the same in the Qt UI.
const sip_calls_info_t *sipinfo;
const isup_calls_info_t *isupinfo;
const h323_calls_info_t *h323info;
const h245_address_t *h245_add = NULL;
const gcp_ctx_t* ctx;
char *guid_str;
if (filter_length < max_filter_length) {
gtk_editable_insert_text(GTK_EDITABLE(main_display_filter_widget), filter_string_fwd->str, -1, &pos);
} else {
g_string_free(filter_string_fwd, TRUE);
filter_string_fwd = g_string_new(filter_prepend);
g_string_append_printf(filter_string_fwd, "(");
is_first = TRUE;
/* Build a new filter based on protocol fields */
lista = g_queue_peek_nth_link(voip_calls_get_info()->callsinfos, 0);
while (lista) {
listinfo = gxx_list_data(voip_calls_info_t *, lista);
if (listinfo->selected) {
if (!is_first)
g_string_append_printf(filter_string_fwd, " or ");
switch (listinfo->protocol) {
case VOIP_SIP:
sipinfo = (sip_calls_info_t *)listinfo->prot_info;
g_string_append_printf(filter_string_fwd,
"(sip.Call-ID == \"%s\")",
sipinfo->call_identifier
);
break;
case VOIP_ISUP:
isupinfo = (isup_calls_info_t *)listinfo->prot_info;
g_string_append_printf(filter_string_fwd,
"(isup.cic == %i and frame.number >= %i and frame.number <= %i and mtp3.network_indicator == %i and ((mtp3.dpc == %i) and (mtp3.opc == %i)) or ((mtp3.dpc == %i) and (mtp3.opc == %i)))",
isupinfo->cic, listinfo->start_fd->num,
listinfo->stop_fd->num,
isupinfo->ni, isupinfo->dpc, isupinfo->opc,
isupinfo->opc, isupinfo->dpc
);
break;
case VOIP_H323:
{
h323info = (h323_calls_info_t *)listinfo->prot_info;
guid_str = guid_to_str(NULL, &h323info->guid[0]);
g_string_append_printf(filter_string_fwd,
"((h225.guid == %s || q931.call_ref == %x:%x || q931.call_ref == %x:%x)",
guid_str,
(guint8) (h323info->q931_crv & 0x00ff),
(guint8)((h323info->q931_crv & 0xff00)>>8),
(guint8) (h323info->q931_crv2 & 0x00ff),
(guint8)((h323info->q931_crv2 & 0xff00)>>8));
listb = g_list_first(h323info->h245_list);
wmem_free(NULL, guid_str);
while (listb) {
h245_add = gxx_list_data(h245_address_t *, listb);
g_string_append_printf(filter_string_fwd,
" || (ip.addr == %s && tcp.port == %d && h245)",
address_to_qstring(&h245_add->h245_address), h245_add->h245_port);
listb = gxx_list_next(listb);
}
g_string_append_printf(filter_string_fwd, ")");
}
break;
case TEL_H248:
ctx = (gcp_ctx_t *)listinfo->prot_info;
g_string_append_printf(filter_string_fwd,
"(h248.ctx == 0x%x)", ctx->id);
break;
default:
/* placeholder to assure valid display filter expression */
g_string_append_printf(filter_string_fwd,
"(frame)");
break;
}
is_first = FALSE;
}
lista = gxx_list_next(lista);
}
g_string_append_printf(filter_string_fwd, ")");
gtk_editable_insert_text(GTK_EDITABLE(main_display_filter_widget), filter_string_fwd->str, -1, &pos);
}
#endif
emit updateFilter(filter_str);
}
void VoipCallsDialog::showSequence()
{
if (file_closed_) return;
QSet<guint16> selected_calls;
foreach (QModelIndex index, ui->callTreeView->selectionModel()->selectedIndexes()) {
voip_calls_info_t *call_info = VoipCallsInfoModel::indexToCallInfo(index);
if (!call_info) {
return;
}
selected_calls << call_info->call_num;
}
sequence_analysis_list_sort(tapinfo_.graph_analysis);
GList *cur_ga_item = g_queue_peek_nth_link(tapinfo_.graph_analysis->items, 0);
while (cur_ga_item && cur_ga_item->data) {
seq_analysis_item_t *ga_item = gxx_list_data(seq_analysis_item_t*, cur_ga_item);
ga_item->display = selected_calls.contains(ga_item->conv_num);
cur_ga_item = gxx_list_next(cur_ga_item);
}
SequenceDialog *sequence_dialog = new SequenceDialog(parent_, cap_file_, sequence_info_);
sequence_dialog->setAttribute(Qt::WA_DeleteOnClose);
sequence_dialog->show();
}
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
void VoipCallsDialog::showPlayer()
{
#ifdef QT_MULTIMEDIA_LIB
RtpPlayerDialog *rtp_player_dialog = new RtpPlayerDialog(*this, cap_file_);
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
foreach (QModelIndex index, ui->callTreeView->selectionModel()->selectedIndexes()) {
voip_calls_info_t *vci = VoipCallsInfoModel::indexToCallInfo(index);
if (!vci) continue;
for (GList *rsi_entry = g_list_first(tapinfo_.rtpstream_list); rsi_entry; rsi_entry = gxx_list_next(rsi_entry)) {
rtpstream_info_t *rsi = gxx_list_data(rtpstream_info_t *, rsi_entry);
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
if (!rsi) continue;
//VOIP_CALLS_DEBUG("checking call %u, start frame %u == stream call %u, start frame %u, setup frame %u",
// vci->call_num, vci->start_fd->num,
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
// rsi->call_num, rsi->start_fd->num, rsi->setup_frame_number);
if (vci->call_num == static_cast<guint>(rsi->call_num)) {
//VOIP_CALLS_DEBUG("adding call number %u", vci->call_num);
rtp_player_dialog->addRtpStream(rsi);
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
}
}
}
connect(rtp_player_dialog, SIGNAL(goToPacket(int)), this, SIGNAL(goToPacket(int)));
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
rtp_player_dialog->setWindowModality(Qt::ApplicationModal);
rtp_player_dialog->setAttribute(Qt::WA_DeleteOnClose);
rtp_player_dialog->setMarkers();
rtp_player_dialog->show();
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
#endif // QT_MULTIMEDIA_LIB
}
QList<QVariant> VoipCallsDialog::streamRowData(int row) const
{
QList<QVariant> row_data;
if (row >= sorted_model_->rowCount()) {
return row_data;
}
for (int col = 0; col < sorted_model_->columnCount(); col++) {
if (row < 0) {
row_data << sorted_model_->headerData(col, Qt::Horizontal);
} else {
row_data << sorted_model_->index(row, col).data();
}
}
return row_data;
}
void VoipCallsDialog::on_callTreeView_activated(const QModelIndex &index)
{
voip_calls_info_t *call_info = VoipCallsInfoModel::indexToCallInfo(index);
if (!call_info) {
return;
}
emit goToPacket(call_info->start_fd->num);
}
void VoipCallsDialog::selectAll()
{
ui->callTreeView->selectAll();
}
void VoipCallsDialog::copyAsCSV()
{
QString csv;
QTextStream stream(&csv, QIODevice::Text);
for (int row = -1; row < sorted_model_->rowCount(); row++) {
QStringList rdsl;
foreach (QVariant v, streamRowData(row)) {
QString strval = v.toString();
// XXX should quotes (") in strval be stripped/sanitized?
rdsl << QString("\"%1\"").arg(strval);
}
stream << rdsl.join(",") << '\n';
}
wsApp->clipboard()->setText(stream.readAll());
}
void VoipCallsDialog::copyAsYAML()
{
QString yaml;
QTextStream stream(&yaml, QIODevice::Text);
stream << "---" << '\n';
for (int row = -1; row < sorted_model_->rowCount(); row++) {
stream << "-" << '\n';
foreach (QVariant v, streamRowData(row)) {
stream << " - " << v.toString() << '\n';
}
}
wsApp->clipboard()->setText(stream.readAll());
}
void VoipCallsDialog::on_buttonBox_clicked(QAbstractButton *button)
{
if (button == prepare_button_) {
prepareFilter();
} else if (button == sequence_button_) {
showSequence();
Qt: Initial RTP playback. Note the "initial". This is woefully incomplete. See the "to do" lists below and in the code. This differs a bit from the GTK+ version in that you specify one or more streams to be decoded. Instead of showing waveforms in individual widgets, add them all to a single QCustomPlot. This conserves screen real estate and lets us more easily take advantage of the QCP API. It also looks better IMHO. Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We probably won't use the widgets until we make 5.0 our minimum Qt version and plain old QtMultimedia lets us support Qt 4 more easily (in theory at least). Add resampling code from libspeex. I initially used this to resample each packet to match the preferred rate of our output device, but this resulted in poorer audio quality than expected. Leave it in and use to create visual samples for QCP and to match rates any time the rate changes. The latter is currently untested. Add some debugging macros. Note that both the RTP player and RTP analysis dialogs decode audio data using different code. Note that voip_calls_packet and voip_calls_init_tap appear to be dead code. To do: - Add silence frames where needed. - Implement the jitter buffer. - Implement the playback timing controls. - Tapping / scanning streams might be too slow. Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4 Bug: 9007 Reviewed-on: https://code.wireshark.org/review/10458 Petri-Dish: Gerald Combs <gerald@wireshark.org> Reviewed-by: Gerald Combs <gerald@wireshark.org>
2014-12-13 00:51:40 +00:00
} else if (button == player_button_) {
showPlayer();
}
}
void VoipCallsDialog::on_buttonBox_helpRequested()
{
wsApp->helpTopicAction(HELP_TELEPHONY_VOIP_CALLS_DIALOG);
}
void VoipCallsDialog::switchTimeOfDay()
{
bool checked = ! call_infos_model_->timeOfDay();
ui->todCheckBox->setChecked(checked);
call_infos_model_->setTimeOfDay(checked);
ui->callTreeView->resizeColumnToContents(VoipCallsInfoModel::StartTime);
ui->callTreeView->resizeColumnToContents(VoipCallsInfoModel::StopTime);
}
/*
* Editor modelines
*
* Local Variables:
* c-basic-offset: 4
* tab-width: 8
* indent-tabs-mode: nil
* End:
*
* ex: set shiftwidth=4 tabstop=8 expandtab:
* :indentSize=4:tabSize=8:noTabs=true:
*/