Since commit 797558ea17 we send the
NS_UNBLOCK_ACK message before dispatching the NS_UNBLOCK signal,
instead of afterwards.
Add comments which explain the intended order of events.
Suggested-by: Pau
Related: OS#2388
Change-Id: I4b93853c952a97302f8afc14f462f22c3e487564
In gprs_ns_process_msg(), we were dispatching the S_NS_UNBLOCK
signal before sending out the NS_POUT_UNBLOCK_ACK message.
Signal handlers might send messages to the other side, assuming
that NS is now unblocked. However, since such messages will arrive
before the UNBLOCK_ACK message the receiver might discard them.
This problem has been observed with our TTCN3 BSSGP_Emulation
as a peer to osmo-pcu.
This patch makes TTCN3 PCU TC_paging() test pass regardless of
whether the test or osmo-pcu is started first. Before this patch,
this test would only pass if the test was started before osmo-pcu.
A remaining problem is that the test does not yet keep passing
reliably unless osmo-pcu is restarted between test runs.
Change-Id: I3af54a14bb6bcfa167c9a9d9f67835e7f5b9f1bb
Related: OS#2890
Related: OS#2388
If we cannot bind the listening socket, reset related fields in
the osmo fd structure to NULL again. Otherwise our caller might
eventually try to use an uninitialized osmo fd.
Change-Id: Ia953b2eff54cac0bd980944291f75db14df09a34
Related: OS#3643
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: Ibc1d3746f1876ac42d6b1faf0e5f83bd2283cdcc
To reset the state of BSSGP allow to flush the BSSGP queues.
When testing (with TTCN3) the test object should be resetted between
each test.
Introduce the functions:
bssgp_fc_flush_queue() - flushs a single flow control object
bssgp_flush_all_queues() - flushs queues of all BSSGP connections
Change-Id: I29b6ad6742ddf9b0b58b4af37d9a1cf18e019325
Return "invalid mandatory information" error status to
the sender in case bssgp_tlv_parse() failed.
To avoid loops, do not respond with an error status to
STATUS PDUs which failed parsing.
Change-Id: If73719b75a94d6742bdefc9b6572525cb00a96ee
Related: OS#3178
The return code from bssgp_tlv_parse() was not checked for a parsing
error. In case of a parsing error the stored return code could have
been overwritten later in this function.
Explicitly check for a parsing error and log corresponding packets.
Change-Id: Id3d7c52ec3df2bcf4efcee0e0b14fe22ef96964e
Related: OS#3178
Enable representing three-digit MNC with leading zeros. The MNCs 23 and 023 are
actually different; so far we treated both as 23. Re-encode an incoming BCD or
string of 023 as it were, i.e. not dropping the leading zero as 23.
Break ABI compatibility by changing the size and ordering of structs
gprs_ra_id, osmo_plmn_id, osmo_cell_global_id, ... by adding an mnc_3_digits
flag.
Change ordering in gprs_ra_id because the canonical oder is {Mobile Country
Code, Mobile Network Code}, so have the mcc member first.
ABI compatibility cannot be maintained for struct gprs_ra_id, since it is a
direct member of structs bssgp_bvc_ctx and bssgp_paging_info, and even just
adding a flag to the end would cause ABI changes of those structs. Similarly,
osmo_plmn_id is a direct member of osmo_location_area_id, and so forth.
Add new API to set and read this additional flag to preserve leading zeros:
- osmo_plmn_to_bcd(), osmo_plmn_from_bcd() after
gsm48_mcc_mnc_to_bcd() and gsm48_mcc_mnc_from_bcd().
- gsm48_decode_lai2(), gsm48_generate_lai2() after
gsm48_decode_lai(), gsm48_generate_lai().
- gsm0808_create_layer3_2() after gsm0808_create_layer3() and gsm0808_create_layer3_aoip().
- various osmo_*_name() functions in gsm23003.h (osmo_rai_name() still in
gsm48.h close to struct gprs_ra_id definition). The amount and duplication of
these may seem a bit overboard, but IMO they do make sense in this way.
Though most code will soon see patches unifying the data structures used, in
some cases (vty, ctrl) they are required singled out. Without these
functions, the formatting ("%0*u", mnc_3_digits ? 3 : 2, mnc) would be
duplicated all over our diverse repositories.
In various log output, include the leading MNC zeros.
Mark one TODO in card_fs_sim.c, I am not sure how to communicate a leading zero
to/from a SIM card FS. The focus here is on the core network / BSS.
To indicate ABI incompatibility, bump libosmogsm and libosmogb LIBVERSIONs;
adjust debian files accordingly.
Implementation choices:
- The default behavior upon zero-initialization will be the mnc_3_digits flag
set to false, which yields exactly the previous behavior.
- I decided against packing the mnc with the mnc_3_digits field into a
sub-struct because it would immediately break all builds of dependent
projects: it would require immediate merging of numerous patches in other
repositories, and it would make compiling older code against a newer
libosmocore unneccessarily hard.
Change-Id: Id2240f7f518494c9df6c8bda52c0d5092f90f221
Add gsm48_encode_ra() which takes appropriate struct as [out] parameter
instead of generic buffer. Using uint8_t buffer instead of proper struct
type prooved to be error-prone - see Coverity CID57877, CID57876.
Old gsm48_construct_ra() is made into tiny wrapper around new
function. The test output is adjusted because of the change in function
return value which was constant and hence ignored anyway.
Related: OS#1640
Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
All successful and all error code paths of bssgp_fc_in() free the msgb, except
the code path calling fc_enqueue() when the msg is dropped (due to queue being
full, or failure to allocate).
Callers could theoretically catch the -ENOSPC return value and discard the
msgb. However, in other code paths, a callback's return value is returned,
which is expected to free the msgb, so such callback would have to never return
-ENOSPC when it freed the msgb. Much simpler semantics would be to free the
msgb in every code path, no matter which kind of error occurred.
Who is currently calling bssgp_fc_in and how do they handle the return value?
- bssgp_fc_test.c ignores the return value (and hits a mem leak aka sanitizer
build failure if the queue is full).
- fc_timer_cb() ignores the return value.
- bssgp_tx_dl_ud() returns the bssgp_fc_in() rc.
- which is returned by a cascade of functions leading up to being returned,
for example, by gprs_llgmm_reset(), which is usually called with ignored
return code.
At this point it is already fairly clear that bssgp_fc_in() should always free
the msgb, since the callers don't seem to distinguish even between error or
success, let alone between -ENOSPC or other errors.
bssgp_fc_test: assert that no msgbs remain unfreed after the tests.
Adjust expected results.
Helps fix sanitizer build on debian 9.
Change-Id: I00c62a104baeaad6a85883c380259c469aebf0df
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
According to
https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags
the libraries supposed to be added to *_LDADD or *_LIBADD
while *_LDFLAGS should contain additional libtool linking
flags. Previously we used both. Let's unify this and move all the
libraries into proper automake variable. While at it - also add
libosmocore.la for tests to LDADD since all the tests link against it
anyway.
Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
The regular 'sh ns' lists all available NS. Sometimes it's handy to know
which of those are persistent.
* add "show ns persistent" command
* adjust parameters of dump-ns*() functions to use bool where
appropriate
Change-Id: Ib812864bae3ea414cc107a7b4f49bea4e6161795
The rate_ctr.c code would do this mangling automatically, but let's
avoid using this from new versions of our code for
simplicity/explicitness.
Change-Id: I24a556f447cfac25efb6e83cac2d0c2972d98fe3
When dumping NSE via vty:
* check which local address would be used to communicate with a given
NSE and print it
* print link layer type last to make output more consistent
Change-Id: I6932a29c7899d36bcc275f05dda9670b0e69bef0
Related: SYS#3610
* add comment about underlying assumption that structs in ip/frgre union
members in gprs_nsvc struct have the same memory layout
* remove such assumption from gprs_ns_ll_str()
* use gprs_ns_ll_str() for NSE dump
Change-Id: Idcb912b7b3f7460fd2b058e16650c0bde8f757ee
This enables logging for every state transition which makes NS
troubleshooting easier.
Change-Id: I5d6eaef0432d9be810bf93d07e40787b9ca59142
Related: SYS#3610
* introduce defines with NS state names
* use them for vty and tests
* expand test output to print complete NS state
Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9
Related: SYS#3610
When listening for nsip connections is enabled, then every remote
host may send packets. This is useful for an SGSN that serves
multiple PCUs, but contraproductive for a PCU that awaits packets
from a single SGSN.
Add struct members remote_ip, and remote_port to struct gprs_ns_inst,
when set, then the listening end uses connect() to ensure that only
the expected host may send packets.
Related: OS#2401
Change-Id: Ifeb201d9006eec275a46708007ff342cdfc14e45
In many callers of the VTY API, we are lacking the vty_install_default() step
at certain node levels. This creates nodes that lack the 'exit' command, and
hence the only way to exit such a node is to restart the telnet session.
Historically, the VTY looked for missing commands on the immediate parent node,
and hence possibly found the parent's 'exit' command when the local node was
missing it. That is why we so far did not notice the missing default commands.
Furthermore, some callers call install_default() instead of
vty_install_default(). Only vty_install_default() also includes the 'exit' and
'end' commands. There is no reason why there are two sets of default commands.
To end this confusion, to catch all missing 'exit' commands and to prevent this
from re-appearing in the future, simply *always* install all default commands
implicitly when calling install_node().
In cmd_init(), there are some top-level nodes that apparently do not want the
default commands installed. Keep those the way they are, by changing the
invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE).
Make both install_default() and vty_install_default() no-ops so that users of
the API may still call them without harm. Do not yet deprecate yet, which
follows in Icf5d83f641e838cebcccc635a043e94ba352abff.
Drop all invocations to these two functions found in libosmocore.
Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
L_NS_NODE and L_BSSGP_NODE had specialized 'exit' and 'end' vty commands, but
all they do is return to the CONFIG and ENABLE_NODEs like the default 'exit'
and 'end' commands. Drop them and use the default 'exit' and 'end' cmds.
Examining BSSGP and NS node behavior in osmo-sgsn exhibited identical list and
exit/end behavior before and after this patch.
Prepares for an upcoming commit incorporating vty_install_default() into
install_node(), see I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b: this patch
changes to the default commands, the upcoming change implies them.
Change-Id: I5b0de066b4249d482c22620d5b1bcb03f381293c
That's necessary for SGSN to properly handle BSS response to reset
procedure initiated by SGSN (foe example via 'bssgp bvc nsei 101 bvci 0
reset' command).
According to 3GPP TS 48.018 §8.4 "after performing the BVC Reset
procedure all affected BVCs are assumed to be unblocked at the SGSN" so
there's no need in any special handling.
Change-Id: I90dfbd0195a8403406429ccc746299d072445f7b
Related: OS#1638
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
Especially for short descriptions, it is annoying to have to type \brief for
every single API doc.
Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes
the first sentence of an API doc as the brief description.
Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
It's a pity that even with this patch we still are fare away from having
the whole API documented. However, at least we have a more solid
foundation. Updates not only extend the documentation, but also make
sure it is rendered properly in the doxygen HTML.
Change-Id: I1344bd1a6869fb00de7c1899a8db93bba9bafce3
Add a new function timer function to set up the timer, similar to what
we have in the Linux kernel. This patch also converts existing opencoded
timer setup in the libosmocore tree as initial client of this new
function.
This patch implicitly removes function callback passed by reference that
defeat compile time type validation.
Compile-tested only, but I ran make check that reports success when
testing timer infrastructure.
Change-Id: I2fa49972ecaab3748b25168b26d92034e9145666
Add value strings for Service Control PDUs according to 3GPP TS 48.016 §9
and use them for logging.
Change-Id: I0ea3a45f35d68619d4cfa9735ef77abd9f9f0d58
Related: SYS#3610
My recent logging patch was merged to master a bit too soon. Accomodate the
request for naming that matches the general "LOG" prefix instead of "LOGGING".
libosmocore will not be backwards-compatible with the few commits from
change-id I5c343630020f4b108099696fd96c2111614c8067 up to this one. This and
following commits are backwards compatible with those before that short window.
See also:
* openbsc change-id Ib2ec5e4884aa90f48051ee2f832af557aa525991
* osmo-pcu change-id I4db4a668f2be07f3d55f848d38d1b490d8a7a685
Change-Id: I424fe3f12ea620338902b2bb8230544bde3f1a93
It is too easy for calling code to use the same filter and context indexes for
different filters and structs. For example, openbsc's IMSI filter and libgb's
GPRS_BVC filter both fall on index 1 even though there are plenty more indexes
to choose from. To alleviate this, have one central definition here, sort of
like ports.h does for VTY and CTRL port numbers.
Add static asserts to make sure the indexes fit in the available array and bit
mask space.
Calling code like openbsc.git and osmo-pcu need adjustments and/or should move
to using these enum values instead of their local definitions.
Taking this opportunity to also prepare for a split of struct gsm_subscriber in
openbsc into bsc_subsciber and vlr_subscriber with appropriate separate filter
index constants for both subscriber types.
Include previous LOG_FILTER_ALL in the LOGGING_FILTER_* enum, and replace its
use by (1 << LOGGING_FILTER_ALL).
Change-Id: I5c343630020f4b108099696fd96c2111614c8067
Setting the BVC log filter to NULL worked only if the NSVC filter was set,
use the proper constant instead.
Change-Id: Ic1cc268ed20700698c93d3ff8bf85cc0f01d3b1b
The TbfTest in osmo-pcu calls gprs_ns_vty_init() repeatedly, which aborts
because of duplicate VTY elements. Fix this by skipping the VTY init if
it already happened.
Change-Id: I05c7f25a4e873ae76b206819180b8b043b60103e
This was actually discovered by the following compiler warning in
gcc-6.2.0:
CC gprs_bssgp_bss.lo
gprs_bssgp_bss.c: In function ‘bssgp_rx_paging’:
gprs_bssgp_bss.c:544:2: warning: this ‘if’ clause does not guard...
[-Wmisleading-indentation]
if (TLVP_PRESENT(&tp, BSSGP_IE_TMSI) &&
^~
gprs_bssgp_bss.c:548:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
*(pinfo->ptmsi) = ntohl(*(uint32_t *)
^
This is an actual bug. If we recevied a BSSGP Paging Request without
P-TMSI, we might crash or report some random memory as P-TMSI to the
caller in the output data structure.
Change-Id: Ib4f307827cd7cccc91c1415a6fb5428d7cf8416d
gprs_bssgp_vty.c:48:34: warning: ‘gprs_bssgp_timer_strs’ defined but not used [-Wunused-const-variable=]
static const struct value_string gprs_bssgp_timer_strs[] = {
^~~~~~~~~~~~~~~~~~~~~
Change-Id: Ia41ccb7b227c41996cdef51dc6779bfc5b5a8d48
gprs_bssgp.c:461:9: runtime error: load of misaligned address
0x62100001a66b for type 'uint32_t', which requires 4 byte alignment
gprs_ns.c:937:16: runtime error: load of misaligned address
0x61d00002a97f for type 'uint16_t', which requires 2 byte alignment
Harald Welte
Stefan Sperling
Pau Espin
Daniel Willmann
Philipp Maier
Neels Hofmeyr