Verify 14 digit and 15 digit IMEI strings. OsmoHLR will use the 14
digit version to check IMEIs before writing them to the DB.
Place the Luhn checksum code in a dedicated osmo_luhn() function, so
it can be used elsewhere.
Related: OS#2541
Change-Id: Id2d2a3a93b033bafc74c62e15297034bf4aafe61
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports one of the prerequisites for doing so:
osmo-bsc code for range-encoding ARFCNs, including tests.
An osmo_gsm48_ prefix has been prepended to public symbols in
order to avoid clashes with existing symbols in osmo-bsc code.
Change-Id: Ia220764fba451be5e975ae7c5eefb1a25ac2bf2c
Related: OS#3075
We have gsm48_mi_to_string() and osmo_bcd2str(), but still lack a function that
conveniently prints both MI type and value in one function call.
Related: http://people.osmocom.org/neels/mi_mi_mi.jpg
Change-Id: I7798c3ef983c2e333b2b9cbffef6f366f370bd81
Both session state and session ID IEs were left from the initial
version of Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71. There is
no need to use them (as we use SM-RP-MR), so let's clean up.
Change-Id: I0d910b87f15ffbc0aeeca9cb4fcbef32bdf3ef88
In 3GPP TS 48.008 the Global Call Reference IE is only used in HANDOVER
REQUEST (§3.2.1.8) and ASSIGNMENT REQUEST (§3.2.1.1) messages which
also include LCLS Config and CSC parameters. Hence, there's no point in
using GCR encode/decode functions alone.
Introduce gsm0808_dec_lcls() and gsm0808_enc_lcls() as trivial wrappers
on top of GCR enc/dec routines which are made static. Adjust tests
accordingly. Test output intentionally left unchanged.
Change-Id: Icfbb2404e1a1d500243e2071173299b557369335
Since I3bc95f2f5ab6e3f4b502647fb3e0aaaf1f7c4cf5, we have some
helpers to compare certain msgb layer to a given buffer. Let's
change 'VERIFY' macro to use msgb_eq_l3_data_print().
Change-Id: Ib6be778236eff8f2153f3113f9379ecfbec9052b
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Simplify gsup_test.c by defining an end marker in gsup.h. No need to
manually update the last element every time anymore.
The C standard guarantees, that the end marker will have the last value
plus one: "Each subsequent enumerator with no = defines its enumeration
constant as the value of the constant expression obtained by adding 1 to
the value of the previous enumeration constant." (From C99: 6.7.2.2
Enumeration specifiers)
Change-Id: I2aab7245e209f0ebd2f33a83d4d181dd3339cb17
This is 1:1 the result of doing
cd libosmocore
./contrib/struct_endianess.py
git commit -a
Running struct_endianess.py again should result in no changes.
That means we could include such a check in the gerrit verification job now.
Change-Id: Ia0b99d76932aeb03e93bd0c62d3bf025dec5f9d2
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add functions to encode Global Call. Ref. from TS 29.205 as 3GPP TS
48.008 §3.2.2.115 information element
* add corresponding tests
Change-Id: I82ce0207dc8de50689a8806c6471ad7fbae6219d
Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
All successful cases already return from the switch(), so simply handle all
errors below it by returning an empty string (if there is enough string
buffer).
Change-Id: I709ac3b9efb7b4258d8660715b10312e11b9b571
For MI encoding, see 3GPP TS 24.008, 10.5.1.4 Mobile Identity. The 'odd' flag
indicates whether the last BCD nibble is used. Of course that flag should be
made sure to reflect the actual length.
Change-Id: Id6e695ebf9f86b295eaa7e2c6228989256f37e68
By using osmo_bcd2str(), ensure that the resulting string is always nul
terminated, and always return strlen()+1 whether truncated or not.
Still keep up the previous return value style, even if that isn't consistent at
all.
The difference between IMSI/IMEI and TMSI return values remains and is not part
of this patch.
Change-Id: I1b51b72a721e1cc9d69796b804ebda741ff0f36b
Add a standalone bcd-to-string conversion function with generic parameters.
Add a regression test in utils_test.c.
So far there is no single universal implementation that converts a BCD to a
string. I could only find gsm48_mi_to_string(), which also interprets
surrounding bytes, MI type and TMSI as non-BCD value.
The idea is to use this function from gsm48_mi_to_string() and similar
implementations in subsequent commits.
Root cause: in osmo-msc, I want to have an alternative MI-to-string function
for composing an FSM name, which needs the BCD part of gsm48_mi_to_string() but
not the TMSI part.
Change-Id: I86b09d37ceef33331c1a56046a5443127d6c6be0
One would think by now we would solidly encode and decode Mobile Identities.
Well, guess again.
- rc is sometimes the amount of bytes written, sometimes actual strlen().
- on string truncation, rc is sometimes strlen() (assuming nul terminated), and
sometimes snprintf()-style would-be strlen().
- returned string, when truncated by not enough buffer size, is sometimes nul
terminated, sometimes not.
- gsm48_mi_to_string() happily reads a byte from zero-length input buffer.
- gsm48_mi_to_string() happily writes to zero length output buffer.
- gsm48_mi_to_string() returns nonempty string for empty input.
- encoding a MI type that still has the GSM_MI_ODD flag set results in encoding
an even-length MI as odd-length (hence appending a stray 'F').
I am going to tweak the implementation of gsm48 mobile identity encoding /
decoding, so first pinpoint the current behavior in a unit test, and show how
perforated even such a seemingly trivial API can be.
Change-Id: Iaae3af87f82f1a8f2e6273984c011b2813038cf7
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
In gprs_ns_process_msg(), we were dispatching the S_NS_UNBLOCK
signal before sending out the NS_POUT_UNBLOCK_ACK message.
Signal handlers might send messages to the other side, assuming
that NS is now unblocked. However, since such messages will arrive
before the UNBLOCK_ACK message the receiver might discard them.
This problem has been observed with our TTCN3 BSSGP_Emulation
as a peer to osmo-pcu.
This patch makes TTCN3 PCU TC_paging() test pass regardless of
whether the test or osmo-pcu is started first. Before this patch,
this test would only pass if the test was started before osmo-pcu.
A remaining problem is that the test does not yet keep passing
reliably unless osmo-pcu is restarted between test runs.
Change-Id: I3af54a14bb6bcfa167c9a9d9f67835e7f5b9f1bb
Related: OS#2890
Related: OS#2388
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
* add note about (yet) unsupported standard feature
* use enum constant instead of hex value
Change-Id: I5cc5fc1ae8d5474dbc8d3385a493adf6420a3c98
Related: OS#3187
3GPP_TS_48.008, 3.2.2.103 Speech Codec List states the following:
"The length indicator (octet 2) is a binary number indicating the
absolute length of the contents after the length indicator.
The length depends on the number and type of Speech Codec Elements
to be included. The minimum length of one Speech Codec Element is 1
octet and the maximum length is 3 octets. The maximum number of
Speech Codec Elements within the Speech Codec List is not defined."
This clearly refers only to the length of a single speech codec
element but not on the overall list. So speech codec lists with
length 0 are indeed permitted by the spec.
- Remove the assertion that checks on zero length speech codec
lists.
Change-Id: I1eb1f4466b98bdd26d765b0e4cc690b5e89e9dd6
Related: OS#3657
We must explicitly check the return value of osmo_log_vty2tgt(), or may run
into a segfault. I wasn't aware of this and introduced numerous such cases in
I36f17c131cc70ce5a1aef62fd9693097de230cd4.
Reproduce: on the VTY, do not issue 'logging enable', invoke 'logging level
force-all LEVEL' first.
Show in logging_vty_test.vty that this situation is now again amended by
telling the user that logging was not enabled.
Related: OS#3611
Change-Id: Id11702d1801d6654ca5e5a51b597a0d802e2e8dd
We want to have well-formed config files that print exactly one space
per VTY/config node level, and not two.
Change-Id: Ia75c7067284ea225cffe13ca71bad05a7747ae66
Add a function to convert S0-S15 bits to struct gsm48_multi_rate_conf,
which hold the codec settings for AMR.
Change-Id: I973736273c236eee84decf15868190e339c3fed4
Related: OS#3548
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
This resurrects change-id I4e656731b16621736c7a2f4e64d9ce63b1064e98
which was reverted in I9e0d405e303ed86d23703ca6362e958dddb2f861
due to gsm0808_test failing.
The test failure is fixed by properly clearing the struct
gsm48_multirate_cfg prior to running tests (add memset(0)).
Change-Id: Ia782e21c206c15e840226d79b4209d13658ee916
Related: OS#3548
Add new command to once-off set each and every category to the given log level,
as discussed at length on the openbsc@ mailing list.
Show that it works in logging_vty_test.vty.
Change-Id: I4c3e4f786476cb813fdc0a7c64f30ee04758309d
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
Add 'logging level force-all <level>' and 'no logging level force-all' as new
names for 'logging level all <level>' and 'logging level all everything'.
Resurrect the functionality of 'logging level all everything' -- even if it is
still deprecated because the name is confusing, it is now just an alias for
'no logging level force-all'.
Show in logging_vty_test.vty that we can now again lift the global logging
clamp, both with the new commands as well as with the deprecated ones.
Also show that 'force-all' is written back properly, if set.
Change-Id: I36f17c131cc70ce5a1aef62fd9693097de230cd4
The 'logging level all everything' has not had an effect for some time now. The
plan is to bring back its old functionality, but to keep it deprecated and
rather define a less confusing name.
* Deprecate 'everything'.
* Do not write 'everything' during 'write file' or 'show running-config', which
we curiously still do until now.
BTW, the reason why we need to compose a complete list of categories for the
deprecated 'everything' command is explained in detail in the commit log for
I3b083f27e3d751ccec258880ae7676e9af959a63
Change-Id: Ib75fedb0572570a61bb34ee729a2af86cf5f16da
I am setting out to refactor various details about logging. To show the effect,
I am first adding this new test to illustrate the exact effects on the various
osmo programs.
Add logging_vty_test.c as a standalone program that simply defines a few
logging categories and opens a telnet vty to play with.
Add logging_vty_test.vty, as an osmo_verify_transcript_vty.py test script.
Add --enable-external-tests to configure.ac, to enable running
logging_vty_test.vty during 'make check'.
Also allow running 'make vty-test' without the need to first configure with
--enable-external-tests (a flexibility I've missed many times over in the other
osmo source trees).
Add a Makefile.am stub for external CTRL tests, basically a copy-paste from
osmo-msc.git. I doubt that libosmocore will get python driven CTRL interface
testing any time soon, but if so we will know to not run it concurrently.
Change-Id: I948e832a33131f8eab98651d6010ceb0ccbc9a9c
Do not link against the system-wide installed libosmo* libs when building the
regression test programs. Always use the locally built ones.
Linking some libosmo libraries causes libtool to pull in other libosmo libs
even though they were not explicitly named. For example, ctrl_test explicitly
links libosmoctrl, but this also has dependencies to libosmovty and libosmogsm:
ldd src/ctrl/.libs/libosmoctrl.so | grep osmo
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f26c26d4000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f26c22bb000)
libosmovty.so.4 => /usr/local/lib/libosmovty.so.4 (0x00007f26c2171000)
If we omit explicit LDADD of these dependencies in the Makefile.am, libtool
will take the first canonical place to find them, which may just be the already
installed older versions of the same libs, which may or may not be compatible
with the current build. In any case, it is never intended to link installed
libs.
All library dependencies are listed by this quick script:
cd libosmocore
for l in $(find . -name "*.so") ; do echo; echo "$l"; ldd $l | grep libosmo; done
./.libs/libosmocore.so
./coding/.libs/libosmocoding.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f25fc3c2000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f25fbfa9000)
libosmocodec.so.0 => /usr/local/lib/libosmocodec.so.0 (0x00007f25fbf9b000)
./codec/.libs/libosmocodec.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007fb4c900d000)
./ctrl/.libs/libosmoctrl.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f5df5129000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f5df4d10000)
libosmovty.so.4 => /usr/local/lib/libosmovty.so.4 (0x00007f5df4bc6000)
./gb/.libs/libosmogb.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f788e536000)
libosmovty.so.4 => /usr/local/lib/libosmovty.so.4 (0x00007f788e3ec000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f788dfd3000)
./vty/.libs/libosmovty.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f3b7ed21000)
./gsm/.libs/libosmogsm.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007fc69472e000)
./sim/.libs/libosmosim.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f2f6412d000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f2f63d14000)
Add all explicit linking of all required library dependencies in all regression
test programs, as shown by above listing.
Example for reproducing a problem:
In libosmocore.a, introduce a new function, and call that from libosmovty code.
For example, I made loglevel_strs non-static in logging.c, and used that in
logging_vty.c. Build and install this in a place where libtool can find it.
Then go back to before this change and rebuild. You will see that linking
ctrl_test (before this patch) then complains about libosmovty requiring the
loglevel_strs symbol which it cannot find in libosmocore.so.
Change-Id: Id084e6e6efd25cd62b1bd7a4fc7c5985c39130c6
We already have osmo_str2lower() and osmo_str2upper(), but these lack:
* proper destination buffer bounds checking,
* ability to call directly as printf() argument.
Deprecate osmo_str2upper() and osmo_str2lower() because of missing bounds
checking.
Introduce osmo_str_tolower_buf(), osmo_str_toupper_buf() to provide
bounds-safe conversion, also able to safely convert a buffer in-place.
Introduce osmo_str_tolower(), osmo_str_toupper() that call the above _buf()
equivalents using a static buffer[128] and returning the resulting string
directly, convenient for direct printing. Possibly truncated but always safe.
Add unit tests to utils_test.c.
Replace all libosmocore uses of now deprecated osmo_str2lower().
Naming: the ctype.h API is called tolower() and toupper(), so just prepend
'osmo_str_' and don't separate 'to_lower'.
Change-Id: Ib0ee1206b9f31d7ba25c31f8008119ac55440797
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As oap_client has moved from osmo-sgsn to libosmogsm, it is only fair
that the related unit test shall also be moved here.
Change-Id: I9d64e10b4bacac9b530cf077841bad762fc6d558
This buffer verifies that all XMAXC fields must be zero before the
entire buffer is considered as silent by osmo_ecu_fr_conceal().
Change-Id: I14a192d001b5e167437cedbe76a1a3dd84dde35c
This makes it easy to debug how XMAXC fields are decreased every
iteration in osmo_ecu_fr_conceal().
Change-Id: I678d4be5e0b15b05873b0d3bf5ea5bbee7bef839
Recent OS#3407 shows that we should verify stderr to catch sanitizer failures.
(They might not always be ignorable like that one.)
Change-Id: Ic9e437a1cc96ae081e0fd6a9b6e3156987e14c0c
Multiplying the uint16_t x by itself seems to default to be calculated in
int32_t range, while it obviously needs uint32_t. This causes sporadic
sanitizer barfs:
Testing integer square-root
utils_test.c:445:18: runtime error: signed integer overflow: 60369 * 60369 cannot be represented in type 'int'
The final result is still correct, because it is in fact interpreted as uint32_t.
Cast to uint32_t to make sure the sanitizer doesn't complain.
Related: OS#3407
Change-Id: I83c14e38deaa466d977ee43c9420534ed90f090d
vty_test: add test against ambiguous cmd causing use-after-free and memory
leaks. Add this test along with the fix, because the new test triggers the
memory use-after-free and leaks, causing build failures.
Add cmd_deopt_with_ctx() to allow passing a specific talloc ctx.
is_cmd_ambiguous(): keep all cmd_deopt() allocations until the function exits.
Add a comment explaining why. Before this, if a command matched an optional
"[arg]" with square brackets, we would keep it in local var 'matched', but we
would free the string it points to at the end of that loop iteration; upon
encountering another match, we would attempt to strcmp against the freed
'matched'. Instead of adding hard-to-read and -verify free/alloc dances to keep
the 'matched' accurately freed/non-freed/..., just keep all cmd_deopt() string
allocated until done.
Needless to say that this should have been implemented on a lower level upon
inventing optional args, but at least this is fixing a program crash.
Related: OS#33903390
Change-Id: Ia71ba742108b5ff020997bfb612ad5eb30d04fcd
The conv_gen.py utility was tested against both Python 2 and 3,
so there is no need to enforce Python 2. Also, having:
#!/usr/local/bin/python{2|3}
is a bad idea, because Python may be installed in a different location.
Change-Id: I6007d481047b584db13d6eda70fb99f11f9ddaa1
Oliver Smith
Stefan Sperling
Philipp Maier
Harald Welte
Neels Hofmeyr
Pau Espin
