enum gsm0808_permitted_speech does not have any value strings. Lets
add value strings to make debugging easier.
Change-Id: I5b5612a5df2758b0137a34c17f7c8c2b3f07c806
The value string table gsm48_chan_mode_names[] lacks a function
to get the value string by a value. Lets add one.
Change-Id: I0757bcc278c140e18249e35864338e19cdaa3cf7
Ericsson supports a RSL command to page and immediate assign
as single command. For paging a MS the BTS must know the
paging group.
Change-Id: I9194500e307ad69f8da07510bc965a7a5cd82a2a
We are alredy doing the same way for ip.access and siemens ones, and
this way we avoid using the hardcoded value in osmo-bsc.
Change-Id: I7cb65f3ff1cfdbe4eee97b7545bcd13a38c72e25
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
According to the GSM TS 04.07, section 11.2.3.1.1 "Protocol
discriminator", bits 1 to 4 of the first octet of a standard
L3 message contain the protocol discriminator IE.
Meanwhile, the GSM48_PDISC_USSD represents value 0x11, i.e.
0b10001, that requires 5 bits, and moreover it is not
documented anywhere. Let's drop it.
Change-Id: Ic4eb8a6db4ff1dfd535bd0c84e7acf1908422f64
There seems to be quite some confusion / overlap between enum
gsm48_reject_value, gsm48_gsm_cause and gsm48_gmm_cause. I tried to go with
gsm48_gsm_cause_names[], but e.g. GSM48_REJECT_CONGESTION is not represented.
Instead of attempting to mix/merge those enums, provide a separate value string
array for enum gsm48_reject_value.
This will be used by osmo-msc's libvlr (refactoring of FSM result handling),
I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1.
Change-Id: I6661f139e68a498fb1bef10c266c2f064b72774a
The speech codec defaults are not correct. The defaults recommended
in 3GPP TS 28.062, Table 7.11.3.1.3-2 are limited by 3GPP TS 48.008,
Section 3.2.2.103. Some defaults are actually reserved for future
use. Also the endianess of the 16 bit values is reversed.
- correct values so that they match the specification
- transmit bytes in the correct endianess
Change-Id: I6c3a34d39a375d71c4128fd38f06629e8b98b100
Introduce gsm0808_dec_cell_id_list2() with supports additional types of
cell identifier lists. The new parsing routines are based on similar
routines used by the paging code in osmo-bsc's osmo_bsc_bssap.c.
Likewise, introduce gsm0808_enc_cell_id_list2() with support for the
same additional types of cell identifier lists.
The old API using struct gsm0808_cell_id_list is deprecated.
The previous definition was insufficient because it assumed that all
decoded cell ID types could be represented with a single uint16_t.
It was declared in a GSM protocol header (gsm/protocol/gsm_08_08.h)
despite being a host-side representation of data in an IE.
The only user I am aware of is in osmo-msc, where this struct is used
for one local variable. osmo-msc releases >= 1.1.0 make use of this API.
While here, fix a small bug in a test:
test_gsm0808_enc_dec_cell_id_list_bss() set the cell ID type to 'LAC'
but obviously wants to use type 'BSS'.
Change-Id: Ib7e754f538df0c83298a3c958b4e15a32fcb8abb
Related: OS#2847
Add inline functions to manipulate and query ACC flag bits
in the rach_control.t2 and rach_control.t3 octets.
These function definitions also serve as documentation of
the purpose of rach_control.t2/t3.
Change-Id: I8f0a65c2980f86eb5c43f3bebe727f4d4d973163
Related: OS#2591
TS 24.007 is quite clear: The upper two bits of the message type
octet are *not* part of the message type in any of the L3 protocols
which implement sequence numbers. it doesn't matter if it's R98 or
R99, or whether the sequence number is 1bit or 2bits wide.
Related: OS#2908
Change-Id: Iec875a77f5458322dfbef174f5abfc0e8c09d464
3GPP doesn't specify a network-side T310 default, but waiting for 180s
(3 minutes!) for the next message after CALL CONFIRMED is clearly way
too long and will just use radio resources for no good reason.
Change-Id: Ia52f9358bc86b23c72af9c80e2fff5cb0004b57a
Related: OS#2884
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
The PDP charging characteristics will be returned from the PDP
selection code and be used in the SGSN. It is following the same
approach as the QoS and PDP addr. It is a bit of a pity that we
have to define this in a different project.
Change-Id: I7815c5dfd7b7fb0ea78d816ebfb3abfbf0090afe
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
Especially for short descriptions, it is annoying to have to type \brief for
every single API doc.
Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes
the first sentence of an API doc as the brief description.
Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
In an AoIP scenario, the speech codec list field specifies the
codecs used in the RTP interface. This patch adds a table
with default codec configurations that match the codec
configurations that are also used on the air interface.
Change-Id: I9dc0165d76a022b2c1b7418bc3133407e61b7261
The implementation of the parser/generator for the speech codec
information element slightly wrong, making it impossible to use
it properly.
(See also: 3GPP TS 48.008, 3.2.2.103)
Change-Id: Idabb0f9620659557672e1c6b90c75481192e5c89
The codec type to be set in member type in struct gsm0808_speech_codec
has its own coding scheme to reference the used codec types. This patch
declares an enum with valid speech codec types.
Change-Id: Icaa768071d4364e671bc7e6d48b82d1f07f93f93
The constants in enum gsm0808_permitted_speech are not very expressive.
Add comments indicating each constant's corresponding codec.
Change-Id: I9734f7c261becffe38ffd41c304d006d08530c1a
3GPP TS 24.008 specifies two new speech versions for half rate and
two new speech modes for full rate. This patch adds the relevant
constants to enum gsm48_bcap_speech_ver in gsm_04_08.h
Change-Id: Id2835384c855f924332d38f01c73bd1cfdb62549
Add the information which GSM Speech codec version coresponds to
which bearer capability speech version.
Change-Id: Ic9493fea139420a52c32b17d00ac7d0b2bf86967
Table 10.5.157 in 10.5.6.6 of 3GPP TS 04.08 is badly formatted. The first
value 0x19 "LLC or SNDCP failure" is in the same line as the heading and has
not been included in the struct_value so far.
Table 10.5.157 in 10.5.6.6 of 3GPP TS 24.008 fixes this formatting issue and
also defines two more values 0x08 and 0x18 which are now added to the struct
value_string.
Change-Id: I5bcc52f739ff0677011d024448afcc2a54869638
* data structure representing 3GPP TS 52.021 §9.4.62 SW Description
* function to serialize it into msgb
* function to deserialize it from buffer
* functions to extract/estimate buffer size for SW Description
* test harness (partially taken from OpenBSC)
There are several similar functions to deal with SW Description in
OpenBSC, there's also need to use similar functionality in
OsmoBTS. Hence it's better to put the code into common library with
proper tests and documentation.
Change-Id: Ib63b6b5e83b8914864fc7edd789f8958cdc993cd
Related: OS#1614
The planned support for true A over IP requires the encoding of
the a Cell Identifier List element (see also BSS_MAP_MSG_PAGING).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I625245dd1dd396fc2bc189e8cd2c444a33042528
The planned support for true A over IP requires the encoding of
the an Encryption Information element (see also BSS_MAP_MSG_CIPHER_MODE_CMD).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I8262050a9d9fd3f17462cfbb046c6e034dccc6fb
The planned support for true A over IP requires the encoding of
the a Channel Type element (see also ASSIGNMENT REQUEST).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: Id0e2164d84b8cbcc6fe6a090fc7f40a1251421d7
The planned support for true A over IP requires the encoding and
decoding of a so called "Speech Codec Element" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I0e1e2edf47adaa45b22d4b0bcae3640dba7ca200
Expand 3GPP TS 52.021 §9.4.43 Probable Cause with Osmocom-specific value
for PCU version reporting to enable sending it via OML alarms.
Change-Id: If57459c0610f2c7b36d599b13087c8deef8bdd9e
Related: OS#1614
Composing the message type string requires knowing the protocol discriminator.
To ease printing the message type, add this function to switch between the
defined value_string[]s depending on pdisc.
Also publish the message type value_string[]s -- without inline functions to
access them because it is anyway more convenient to use
gsm48_pdisc_msgtype_name() instead.
Since gsm48_pdisc_msgtype_name() is nontrivial, do not add as inline function
-- in case the message type is not known, it needs a static string buffer.
Change-Id: I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
I often want to log the protocol discriminator in the openbsc debug log. It's
more useful to get the name directly instead of looking it up every time.
Change-Id: I0f053e2a4360b27ffccda7cf82469fb1b1cbb3ae
The previous version of this commit got reverted to avoid a breakage in openbsc.
The problem is openbsc use an array of chreq_type with a manual defined size. This array
is using enums as index which breaks if any elements got added into the
middle, because the size of the array can't hold elements greater or
equal than the size.
Change-Id: I6676105507fe4e5627f740dfe4c2770f766ad068
Philipp Maier
Harald Welte
Keith Whyte
Neels Hofmeyr
Pau Espin
Neels Hofmeyr
Daniel Willmann