bitvec.c: In function 'bitvec_unhex':
bitvec.c:389: error: 'for' loop initial declarations are only allowed in C99 mode
bitvec.c:389: note: use option -std=c99 or -std=gnu99 to compile your code
Allocation, pack/unpack, field access and helper routines used
extensively by Osmo-PCU. Whenever memory allocation happens, alocator
context is passed explicitly by caller.
Include the headers mentioned by the manpage
ipa.c:346:9: warning: implicit declaration of function 'recv' is invalid in C99
[-Wimplicit-function-declaration]
ret = recv(fd, msg->tail, needed, 0);
'\0' gets translated to zero but the argument to vector_set is
a pointer and it gets converted to a pointer.
vty.c:985:21: warning: expression which evaluates to zero treated as a null pointer constant of type
'void *' [-Wnon-literal-null-conversion]
vector_set(vline, '\0');
^~~~
vty.c:1095:21: warning: expression which evaluates to zero treated as a null pointer constant of type
'void *' [-Wnon-literal-null-conversion]
vector_set(vline, '\0');
^~~~
vty.c:1097:21: warning: expression which evaluates to zero treated as a null pointer constant of type
'void *' [-Wnon-literal-null-conversion]
vector_set(vline, '\0');
^~~~
The undefined behavior sanitizer found the 32bit load from an
unaligned memory address. This will cause an exception on ARMv5te
and a manual fix-up.
[hfreyther: On armv6, x86 the usage of memcpy leads to shorter
amount of instructions but on armv5te the memcpy is not expanded
leading to a branch. Use the version of max until we have the time
to benchmark it]
Sponsored-by: On-Waves ehf
This code dealing with bit shifting sometimes gets 1 byte beyond array
boundary while calculating index. This is now explicitly checked and prevented.
Ticket: OW#1198
Sponsored-by: On-Waves ehf
Our tests want to be able to change symbols from the library and
even by using --wrap=XYZ it is not possible right now. One option
would be to use static linking but that is not always enabled, the
other is to skip tests on Ubuntu and the third one is to disable
that linking mode. This means that the dynamic linker needs to
spend some more time but we do spend this time on all other distros
and this looks acceptable.
Currently msgb_trim only checks for len > data_len and returns -1
in that case, allowing the caller to fix it somehow. Using a negative
length will always lead to a corrupt msgb, but this is not being
checked.
This commit adds a check for len < 0 and a conditional call to MSGB_ABORT.
Sponsored-by: On-Waves ehf
Currently the msgb error handling cannot be fully tested, since in
many cases osmo_panic will be called. This will in turn call abort().
Using an osmo_panic_handler that just returns will not help, since
many msgb functions rely on MSGB_ABORT to not return at all.
This commit uses an alternative osmo_panic_raise handler that just
calls longjmp to return to the test function.
Since some of this activity is logged to stderr where the strings may
contain variable parts like pointer addresses, stderr checking is
disabled in testsuite.at.
Sponsored-by: On-Waves ehf
This tests several API functions of the msgb by checking the
invariant and by dumping resulting message buffers as hex.
Sponsored-by: On-Waves ehf
Conflicts:
tests/Makefile.am
The new functions bitvec_get_bytes and bitvec_set_bytes copy
byte sequences from bitvecs to uint8_t arrays and vice versa.
While the bytes in the bitvecs do not need to be aligned, the uint8_t
arrays always are. In case the bytes in the bitvec are aligned, the
implementation uses memcpy.
Note that the implementation like the other existing functions assume
MSB first encoding.
[hfreyther: Squash the comment fix into this commit as well]
Sponsored-by: On-Waves ehf
These functions are currently part of openbsc but also needed by
other projects.
The function have been renamed as follows:
gprs_apn_to_str -> osmo_apn_to_str
gprs_str_to_apn -> osmo_apn_from_str
Sponsored-by: On-Waves ehf
Shipping our own private copy of talloc was a good idea in 2008,
when it was not readily available on most target platforms. Today,
the situation is quite different, as it is a standard library on
major Linux distributions.
This patch makes msgb_hexdump accept out of range lXh pointers and
shows info about them instead of aborting the dump entirely.
Sponsored-by: On-Waves ehf
These functions originate from openbsc/src/gprs but are generic
msgb helper functions.
msgb_copy: This function allocates a new msgb, copies the data
buffer of msg, and adjusts the pointers (incl. l1h-l4h)
accordingly.
msgb_resize_area:
This resizes a sub area of the msgb data and adjusts the
pointers (incl. l1h-l4h) accordingly.
Sponsored-by: On-Waves ehf
The primitives for SUSPEND, RESUME and RECONNECT are only permitted on
the MS side of the LAPDm link, not on the BTS side. So we should check
for this and reject, accordingly.
Currently the state is assumed to remain the same while the reset
procedure is active. While this works correctly in general, a single
unexpected BLOCK_ACK or UNBLOCK_ACK can change the state but will not
stop the reset procedure. The leads to repeated RESET messages, where
the corresponding RESET_ACK is ignored. This is a stable state which
can only be left by manual intervention or by reception of a RESET
message from the peer.
This commit changes the RESET timeout handler to set the state to
BLOCKED/RESET when sending the new NS RESET message.
Note that this should ensure a clean restart even if the state has been
screwed up. It does not fix the handling of BLOCK_ACK or UNBLOCK_ACK
in abnormal cases.
Addresses:
gprs_ns.c:349 NSEI=8895 Tx NS RESET (NSVCI=8895, cause=O&M intervention)
gprs_ns.c:878 NSVCI=8895 Rx NS RESET ACK (NSEI=8895, NSVCI=8895)
gprs_ns.c:887 NS RESET ACK Discarding unexpected message for NS-VCI 8895 from SGSN NSEI=8895
Ticket: OW#1551
Sponsored-by: On-Waves ehf
stats_statsd.c: In function ‘osmo_stats_reporter_statsd_send_item’:
stats_statsd.c:154:15: warning: initialization discards ‘const’ qualifier from pointer target type
char *unit = desc->unit;
^
The stat item group is not removed by gprs_nsvc_delete which will
corrupt the group list.
Addresses:
valgrind tests/gbproxy/gbproxy_test
[...]
==4541== Invalid write of size 4
==4541== at 0x4071ACA: __llist_add (linuxlist.h:65)
==4541== by 0x4071ACA: llist_add (linuxlist.h:81)
==4541== by 0x4071ACA: osmo_stat_item_group_alloc
(stat_item.c:112)
==4541== by 0x407EDFD: gprs_nsvc_create (gprs_ns.c:244)
==4541== by 0x408109D: gprs_ns_instantiate (gprs_ns.c:1388)
==4541== by 0x804CFD3: test_gbproxy_ident_changes
(gbproxy_test.c:1501)
==4541== by 0x805FBD3: main (gbproxy_test.c:5803)
Sponsored-by: On-Waves ehf
This symbol is globally visible and therefore should have an OSMO
prefix like the other identifiers exported by stat_item.h.
Sponsored-by: On-Waves ehf
Shipping our own private copy of talloc was a good idea in 2008,
when it was not readily available on most target platforms. Today,
the situation is quite different, as it is a standard library on
major Linux distributions.
Currently the counters are scanned twice, once for interval
computation and once for reporting.
This adds a reminder to move the interval computation code to a
special stats reporter which just shall update the fields.
Sponsored-by: On-Waves ehf
This tests uses a dedicated test reported to check several aspects of
the value reporting.
- addition/removal of stats reporter
- addition/removal of counters/items
- setting of max_class
- initial value flush
- updating single counters/items
- reporter retrieval
- enable/disable
Sponsored-by: On-Waves ehf
Due to prior refactoring, the functions do not have an sensible order
in the file. This commit tries to improve that a little bit.
Sponsored-by: On-Waves ehf
This commit moves the stats specific code parts into stats_statsd.c
while keeping the generic parts in stats.c. The code in stats.c no
longer contains references to statsd symbols.
Note that the VTY code still needs to know about every stats reporter
backend.
Sponsored-by: On-Waves ehf
https://autotools.io/pkgconfig/pkg_check_modules.html
> If you have the first call to PKG_CHECK_MODULES inside a bash
> conditional block, the expansion of PKG_PROG_PKG_CONFIG will also be
> conditional
> You can solve this problem in two ways; you can either explicitly call
> PKG_PROG_PKG_CONFIG outside of any conditional, forcing checking for
> pkg-config as soon as possible; or you can rewrite your conditionals
> to use the proper syntax
This introduces a new configure flag by which the libosmocore-internal
talloc code is not compiled, but rather a system-wide libtalloc is used.
When we started openbsc/libosmocore in 2008, libtalloc was not widely
present on systems yet. This has changed meanwhile, and we should
simply use the system-wide library
CC stat_item.lo
stat_item.c: In function 'osmo_stat_item_group_alloc': stat_item.c:84:28: warning: cast to pointer from integer of different
size [-Wint-to-pointer-cast]
group->items[item_idx] = (void *)items_size;
^
stat_item.c:98:24: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
((uint8_t *)items + (int)group->items[item_idx]);
^
Holger Hans Peter Freyther
Neels Hofmeyr
Harald Welte