An enum is more clear than an int and #defines for passing around,
also in case you have a switch () statement, the compiler will issue
warnings for unhandled cases.
Change-Id: Icbbe8786a776081d7643193f154e6270224399e6
Add the constant, so it can be used in create-subscriber-on-demand
related patches. ITU-T Rec. E.164 6.1 states that maximum international
number length should be 15. I did not find a source for a minimum
length, but I've added the constant and set it to 1 for consistency
(based on the existing osmo_msisdn_str_valid() function).
Related: OS#2542
Change-Id: Idc74f4d94ad44b9fc1b6d43178f5f33d551ebfb1
IE GSM0808_IE_OSMO_OSMUX_SUPPORT (T, 1 byte) is sent in AoIP appended to
BSSMAP RESET in order to announce the peer that its MGW supports handling
Osmux streams upon call set up.
IE GSM0808_IE_OSMO_OSMUX_CID (TV, T 1 byte & V 1 byte) is sent in AoIP
during call set up:
* MSC->BSC Assignment Request
* BSC->MSC Assignemnt Complete
The 1 byte value contains the local Osmux CID, aka the recvCID aka CID where the
peer sending the Assign Req/Compl will look for Osmux frames on that
call. Hence, the peer receiving this CID value must use it to send Osmux
frames for that call.
As a result, a given call leg BSC<->MSC can have one different Osmux CID
per direction. For example:
* MS => MGW_BSC ==CID 0==> MGW_MSC
* MS <= MGW_BSC <=CID 1=== MGW_MSC
This allows for setups with 256 call legs per BSC on scenarios where NAT
is not a problem, where MSC can have a pool of 256 CID per MGW_BSC (or
remote peer).
Related: OS#2551
Change-Id: I28f83e2e32b9533c99e65ccc1562900ac2aec74e
This function is doing the bulk work of encoding a given Cell
ID List item. gsm0808_enc_cell_id_list2() is modified to be a
wrapper / loop around the new function.
The purpose of this is to expose Cell ID List Entry encoding
so that the upcoming CBSP protocol encoder can re-use this code.
Related: OS#3537
Change-Id: I6cc567798e20365e6587e6b2988e834306d8c80c
In testing against a particular EPC, the SGsAP-SERVICE-REQUEST
can contain a MO fallback value TLV with T 0xF1
Change-Id: Ia2460af9673818d375e28c67f1631b5f7eacdaeb
In Change-Id Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576, the old
declaration of gsm0808_create_handover_request_ack() was accidentially
removed from the gsm0808.h header file. The actual function itself
(and the exported symbol) remained for backwards compatibility at
runtime, but removing the declaration from the header file resulted in
build failures across the board of all automatic tests.
Let's re-introduce the old declaration.
Change-Id: I9e96fa675fccca9ee9631caad7559dea3794d490
osmo-bsc so far omits the AoIP Transport Layer Address from its Handover
Request Acknowledge message, which breaks inter-BSC Handover for AoIP.
Allow fixing that.
One quirk I really don't like about this: I would prefer to directly use struct
sockaddr_storage as a member of the struct gsm0808_handover_request_ack. Even
though struct sockaddr_storage appears in various function signatures, the
gsm0808.c actually also gets built on embedded systems that lack arpa/inet.h
(for me indicated by the ARM build job on jenkins). Compiling gsm0808.c works
only because the actual coding of struct sockaddr_storage is implemented in
gsm0808_util.c, which (apparently) does not get built on embedded and hence,
even though there are undefined references to e.g.
gsm0808_enc_aoip_trasp_addr() it works.
Related: I4a5acdb2d4a0b947cc0c62067a67be88a3d467ff (osmo-bsc)
Change-Id: Ia71542ea37d4fd2c9fb9b40357db7aeb111ec576
For async callbacks it is useful to determine whether a given VTY pointer is still valid.
For example, in osmo-msc, a silent call can be triggered by VTY, which causes a
Paging. The paging_cb then writes to the VTY console that the silent call has
succeeded. Unless the telnet vty session has already ended, in which case
osmo-msc crashes; e.g. from an osmo_interact_vty.py command invocation. With
this function, osmo-msc can ask whether the vty pointer passed to the paging
callback is still active, and skip vty_out() if not.
Change-Id: I42cf2af47283dd42c101faae0fac293c3a68d599
In BSSMAP messages, at least the Cell Identifier IE can appear more than once.
We have tlv_parse2() which allows decoding into an array of tlv_parsed to
cleanly handle multiple occurences. Hence add osmo_bssap_tlv_parse2() which
supports multiple occurences.
An alternative would be to directly call tlv_parse2() with gsm0808_att_tlvdef()
when multiple T occurences are needed, and I'm not really sure why
osmo_bssap_tlv_parse() exists in the first place. But because it does, add a
similar definition that is capable of handling multiple IEs with identical Tag
discriminator.
Change-Id: Ib9a2095f7498dc2cda2a57154b2dbe4621df72f8
gsm48_decode_bcd_number() is unable to provide proper bounds validation of
input and output data, hence osmo-msc's vlr.c introduced a static
decode_bcd_number_safe() a long time ago. Move to libosmocore.
I need to use the same function to decode an MSISDN during inter-MSC Handover,
instead of making it public in osmo-msc, rather deprecate the unsafe function
and provide a safer version for all callers. Mark the old one deprecated.
Change-Id: Idb6ae6e2f3bea11ad420dae14d021ac36d99e921
The actual value-string array 'gsm_chan_t_names' describes
the enum values of 'gsm_chan_t', not 'gsm48_chan_mode'.
Change-Id: Ifc2121b23fb8d07589cc5b7aa8fbf4e27eb6b72b
Fixes: CID#188831, CID#188825
Change two instances of Speech Version values to enum gsm0808_permitted_speech.
It is often not trivial to find the right values for a uint8_t member, giving
the enum name makes it a lot easier/safer to use.
In gsm0808_create_handover_required(), use msgb_tv_put() so that the enum's
storage size doesn't matter. (Already used for handover_performed)
Fix typo in doc of gsm0808_create_handover_required().
Change-Id: I6387836bab76e1fa42daa0f42ab94fc14b70b112
Based on a draft created by Neels, which is the result of reading a MAP
trace of two MSCs negotiating inter-MSC handovers, and of reading the
TS 29.002, TS 29.010 and related specs:
https://lists.osmocom.org/pipermail/openbsc/2019-January/012653.html
I figured out that the "Handover Number" mentioned in the specifications
is the same as the MSISDN IE that we already have, so we can use that
instead of creating a new IE (example usage in tests/gsup/gsup_test.c).
Create a new OSMO_GSUP_MSGT_E_ROUTING_ERROR message type, which the GSUP
server uses to tell a client that its message could not be forwarded to
the destination (see [1]). MAP has no related message.
[1]: Change-Id: Ia4f345abc877baaf0a8f73b8988e6514d9589bf5 (osmo-hlr.git)
Related: OS#3774
Change-Id: Ic00b0601eacff6d72927cea51767801142ee75db
osmo-msc and osmo-hlr have distinct subsystems handling incoming GSUP messages.
So far we decide entirely by message type which code path should handle a GSUP
message. Thus no GSUP message type may be re-used across subsystems.
If we add a GSUP message to indicate a routing error, it would have to be a
distinct message type for subscriber management, another one for SMS, another
one for USSD...
To allow introducing common message types, introduce a GSUP Message Class IE.
In the presence of this IE, GSUP handlers can trivially direct a received
message to the right code path. If it is missing, handlers can fall back to the
previous switch(message_type) method.
Change-Id: Ic397a9f2c4a7224e47cab944c72e75ca5592efef
Various places in our code base figure out how many chars they need to safely
store an IMSI. An IMSI can have a checksum digit, which is not reflected by
GSM23003_IMSI_MAX_DIGITS. And we usually need a terminating \0.
Instead of having a magic +2 repeated every so often, rather define
OSMO_IMSI_BUF_SIZE to contain both checksum digit and nul char, and have the
explanatory comment with it here in libosmocore.
Change-Id: Id11ada4c96b79f7f0ad58185ab7dbf24622fb770
We often compose FSM instance IDs from context information, for example placing
an MSISDN string or IP:port information in the FSM instance id, using
osmo_fsm_inst_update_id_f(). This fails if any characters are contained that
don't pass osmo_identifier_valid(). Hence it is the task of the caller to make
sure only characters allowed in an FSM id are applied.
Provide API to trivially allow this by replacing illegal chars:
- osmo_identifier_sanitize_buf(), with access to the same set of illegal
characters defined in utils.c,
- osmo_fsm_inst_update_id_f_sanitize() implicitly replaces non-identifier
chars.
This makes it easy to add strings like '192.168.0.1:2342' or '+4987654321' to
an FSM instance id, without adding string mangling to each place that sets an
id; e.g. replacing with '-' to yield '192-168-0-1:2342' or '-4987654321'.
Change-Id: Ia40a6f3b2243c95fe428a080b938e11d8ab771a7
To be able to append an escaped or quoted string using
OSMO_STRBUF_APPEND_NOLEN(), the function signature must have the buf and len as
first args, like most other *_buf() functions.
Add osmo_escape_str_buf2() and osmo_quote_str_buf2() to match this signature.
A recent patch [1] has changed the return value of osmo_escape_str_buf() to
char*, removing the const. However, the functions may return const strings,
hence re-add the const. The new signatures always return the non-const buffer.
To avoid code duplication, implement osmo_quote_str_buf() and
osmo_escape_str_buf() by calling the new functions.
I decided to allow slight changes to the behavior for current osmo_escape_str()
and osmo_escape_str_buf(), because impact on callers is minimal:
(1) The new implementation uses OSMO_STRBUF_*, and in consequence
osmo_quote_str() no longer prints an ending double quote after truncated
strings; Before, a truncated output was, sic:
"this string is trunca"
and now this becomes, sic:
"this string is truncat
I decided to not keep the old behavior because it is questionable to begin
with. It looks like the string actually ended at the truncation boundary
instead of the reason being not enough space in the output buffer.
(2) The new osmo_escape_str_buf2() function obviously cannot pass-thru an
unchanged char* if no escaping was needed. Sacrifice this tiny optimization
feature to avoid code duplication:
- it is an unnoticeable optimization,
- the caller anyway always passes a string buffer,
- the feature caused handling strings and buffers differently depending on
their content (i.e. code that usually writes out strings in full length
"suddenly" truncates because a non-printable character is contained, etc.)
I considered adding a skip_if_unescaped flag to the osmo_quote_str_buf2()
function signature, but in the end decided that the API clutter is not worth
having for all the above reasons.
Adjust tests to accomodate above changes.
[1] 4a62eda225
Ibf85f79e93244f53b2684ff6f1095c5b41203e05
Change-Id: Id748b906b0083b1f1887f2be7a53cae705a8a9ae
In OSMO_STRBUF_APPEND, use local variable names that are less likely to shadow
other local variables: prefix with _sb_.
In OSMO_STRBUF_APPEND, add a check to add to .pos only if it is not NULL.
Add OSMO_STRBUF_APPEND_NOLEN(), which works for function signatures that don't
return a length. This is useful for any osmo_*_buf() string writing functions,
so that these write directly to the strbuf.
Change-Id: I108cadf72deb3a3bcab9a07e50572d9da1ab0359
Move from a static implementation in tdef_vty.c to utils.c, I also want to use
this in osmo-msc.
The point is that the telnet VTY allows unambiguous partly matches of keyword
args. For example, if I have a command definition of:
compare (apples|oranges)
then it is perfectly legal as for the vty parser to write only
compare app
One could expect the VTY to then pass the unambiguous match of "apples" to the
parsing function, but that is not the case.
Hence a VTY function implementation is faced with parsing a keyword of "app"
instead of the expected "apples".
This is actually a very widespread bug in our VTY implementations, which assume
that exactly one full keyword will always be found. I am now writing new
commands in a way that are able to manage only the starts of keywords.
Arguably, strstr(a, b) == a does the same thing, but it searches the entire
string unnecessarily.
Change-Id: Ib2ffb0e9a870dd52e081c7e66d8818057d159513
Add global flag osmo_fsm_term_safely() -- if set to true, enable the following
behavior:
Detect osmo_fsm_inst_term() occuring within osmo_fsm_inst_term():
- collect deallocations until the outermost osmo_fsm_inst_term() is done.
- call osmo_fsm_inst_free() *after* dispatching the parent event.
If a struct osmo_fsm_inst enters osmo_fsm_inst_term() while another is already
within osmo_fsm_inst_term(), do not directly deallocate it, but talloc-reparent
it to a separate talloc context, to be deallocated with the outermost FSM inst.
The effect is that all osmo_fsm_inst freed within an osmo_fsm_inst_term()
cascade will stay allocated until all osmo_fsm_inst_term() are complete and all
of them will be deallocated at the same time.
Mark the deferred deallocation state as __thread in an attempt to make cascaded
deallocation handling threadsafe. Keep the enable/disable flag separate, so
that it is global and not per-thread.
The feature is showcased by fsm_dealloc_test.c: with this feature, all of those
wild deallocation scenarios succeed.
Make fsm_dealloc_test a normal regression test in testsuite.at.
Rationale:
It is difficult to gracefully handle deallocations of groups of FSM instances
that reference each other. As soon as one child dispatching a cleanup event
causes its parent to deallocate before fsm.c was ready for it, deallocation
will hit a use-after-free. Before this patch, by using parent_term events and
distinct "terminating" FSM states, parent/child FSMs can be taught to wait for
all children to deallocate before deallocating the parent. But as soon as a
non-child / non-parent FSM instance is involved, or actually any other
cleanup() action that triggers parent FSMs or parent talloc contexts to become
unused, it is near impossible to think of all possible deallocation events
ricocheting, and to avoid running into freeing FSM instances that were still in
the middle of osmo_fsm_inst_term(), or FSM instances to enter
osmo_fsm_inst_term() more than once. This patch makes deallocation of "all
possible" setups of complex cross referencing FSM instances easy to handle
correctly, without running into use-after-free or double free situations, and,
notably, without changing calling code.
Change-Id: I8eda67540a1cd444491beb7856b9fcd0a3143b18
To prevent re-entering osmo_fsm_inst_term() twice for the same osmo_fsm_inst,
add flag osmo_fsm_inst.proc.terminating. osmo_fsm_inst_term() sets this to
true, or exits if it already is true.
Update fsm_dealloc_test.err for illustration. It is not relevant for unit
testing yet, just showing the difference.
Change-Id: I0c02d76a86f90c49e0eae2f85db64704c96a7674
We have a habit of returning static buffers from some functions,
particularly when generating some kind of string values. This is
convenient in terms of memory management, but it comes at the expense
of not being thread-safe, and not allowing for two calls of the
related function within one printf() statement.
Let's introduce _c suffix versions of those functions where the
caller passes in a talloc context from which the output buffer shall
be allocated.
Change-Id: I8481c19b68ff67cfa22abb93c405ebcfcb0ab19b
As per 3GPP TS 03.40, section 9.2.3.16 "TP-User-Data-Length (TP-UDL)"
field may contain up to 140 octets (or 140 * 8 / 7 = 160 septets).
Change-Id: I54f88d2908ac47228813fb8c049f4264e5145241
Provide a common implementation of use counting that supports naming each user
as well as counting more than just one use per user, depending on the rules the
caller implies.
In osmo-msc, we were originally using a simple int counter to see whether a
connection is still in use or should be discarded. For clarity, we later added
names to each user in the form of a bitmask of flags, to figure out exactly
which users are still active: for logging and to debug double get / double put
bugs. This however is still not adequate, since there may be more than one CM
Service Request pending. Also, it is a specialized implementation that is not
re-usable.
With this generalized implementation, we can:
- fix the problem of inadequate counting of multiple concurrent CM Service
Requests (more than one use count per user category),
- directly use arbitrary names for uses like __func__ or "foo" (no need to
define enums and value_string[]s),
- re-use the same code for e.g. vlr_subscr and get fairly detailed VLR
susbscriber usage logging for free.
Change-Id: Ife31e6798b4e728a23913179e346552a7dd338c0
For handling RTP IP addresses and ports, osmo-mgw, osmo-bsc and osmo-msc
so far have their own separate shims and code duplication around
inet_ntoa(), htons(), sockaddr conversions etc. Unify and standardize
with this common API.
In the MGW endpoint FSM that was introduced in osmo-bsc and which I
would like to re-use for osmo-msc (upcoming patch moving that to
osmo-mgw), it has turned out that using char* IP address and uint16_t
port number types are a convenient common denominator for logging,
MGCP message composition and GSM48. Ongoing osmo-msc work also uses this
for MNCC.
This is of course potentially useful for any other IP+port combinations
besides RTP stream handling.
Needless to say that most current implementations will probably stay
with their current own conversion code for a long time; for current
osmo-{bsc,msc,mgw} work (MGW endpoint FSM) though, I would like to move
to this API here.
Change-Id: Id617265337f09dfb6ddfe111ef5e578cd3dc9f63
We have a number of static buffers in use in libosmo*. This means
the related functions are not usable in a thread-safe way. While
we so far don't have many multi-threaded programs in the osmocom
universe, the static buffers also prevent us from calling the same
e.g. string-ify function twice within a single printf() call.
Let's make sure there's an alternative function in all those cases,
where the user can pass in a caller-allocated buffer + size, and make
the 'classic' function with the static buffer a wrapper around that
_buf() variant.
Change-Id: Ibf85f79e93244f53b2684ff6f1095c5b41203e05
osmo_escape_str_buf() used to have the somewhat odd semantics that
if no escaping was needed, it would return the original pointer without
making any copy to the output buffer. While this seems like an elegant
optimization, it is a very strange behavior and it works differently
than all of our other *_buf() functions. Let's unify the API and
turn osmo_escape_str_buf() into a strlcpy() if no escaping is needed.
Change-Id: I3a02bdb27008a73101c2db41ac04248960ed4064
Doxygen was confused by duplicated documentation for both
definition and declaration of rate_ctr_for_each_counter().
Moreover, both variants contained some mistakes.
Let's avoid this duplication and keep the only (corrected) one.
Change-Id: Icca2d4a95bd5f96ae85a86909ec90fb8677cacf3
core/msgb.h:414: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_pull_to_l2(struct msgb *msg)
core/msgb.h:399: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_pull_to_l3(struct msgb *msg)
core/msgb.h:351: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u16(struct msgb *msg, uint16_t word)
core/msgb.h:361: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u32(struct msgb *msg, uint32_t word)
core/msgb.h:341: warning: argument 'msgb' of command @param is not
found in the argument list of
msgb_push_u8(struct msgb *msg, uint8_t word)
Change-Id: I5d660933ecfa89c631319eccf9e3d5c1986ec8ff
Thanks to the following Doxygen warning:
msgb.h:XXX: warning: The following parameters of
msgb_eq_l2(msg1, msgb2, len) are not documented:
parameter 'msgb2'
parameter 'len'
it was discovered that parameter 'len' is not required at all.
It basically doesn't make any sense to pass any length value,
because it can be calculated using msgb_length().
Let's drop this parameter. Given that this part of the API was
broken so far (see I1079d629abdb8770eef6be7341e586a933cd9cca),
it should be more or less safe to do this.
Change-Id: Icd9b72eb6bfa9628ff1ed2f948b57058551a4328
Neither Doxygen documentation of the msgb data comparison helpers,
nor their actual definitions does refer msgb2. Instead, 'msg2' is
referenced in both cases. This was discovered while investigating
the following Doxygen warnings:
msgb.h:XXX: warning: argument 'msg2' of command @param is not
found in the argument list of
msgb_eq(msg1, msgb2, len)
msgb.h:XXX: warning: The following parameters of
msgb_eq_l2(msg1, msgb2, len) are not documented:
parameter 'msgb2'
parameter 'len'
Due to this bug it was impossible to use the affected macros,
because 'msg2' was not listed in their parameters. Having the
unit test coverage would spot this bug at the beginning!
Change-Id: I1079d629abdb8770eef6be7341e586a933cd9cca
- drop incorrect \ref and \a references;
- add missing documentation to LLIST_HEAD_INIT;
- document parameter 'member' of llist_entry();
- turn @argument naming into a valid \param format;
- fix 'type *' vs llist_head loop counter confusion;
- capitalize and dot-terminate all sentences.
Change-Id: Iac67bdb9d5fbf7c222d04858967337f2428d6a94
The naming of these constants dates back to when the code was private
within OpenBSC. Everything else was renamed (bsc_fd -> osmo_fd) at
the time, but somehow the BSC_FD_* defines have been missed at the
time.
Keep compatibility #defines around, but allow us to migrate the
applications to a less confusing naming meanwhile.
Change-Id: Ifae33ed61a7cf0ae54ad487399e7dd2489986436
The function gsm0808_sc_cfg_from_gsm48_mr_cfg() takes an S15 to S0
bitmask and converts that bitmask into an AMR multirate configuration
struct.
Unfortunately the current implementation implements 3GPP TS 28.062,
Table 7.11.3.1.3-2 wrongly in some aspects. Lets fix this.
- Fix wrong interpretation of the bitpatterns
- 5,15K is invalid and must never be selected
- Make sure that no more than 4 rates are selected in the active set
- Extend unit-test
Change-Id: I6fd7f4073b84093742c322752f2fd878d1071e15
Related: SYS#4470
CGI to Cell ID: for example, for Paging, osmo-msc has a CGI for a subscriber
and needs to send out a Cell Identifier IE. Makes sense to add this conversion
here.
Cell ID to CGI: for a Layer 3 Complete, a subscriber sends the current cell in
the form of a Cell Identifier, which we store as a CGI, if necessary enriched
with the local PLMN.
Add enum with bitmask values to identify parts of a CGI, for the return value
of gsm0808_cell_id_to_cgi(). Can't use enum CELL_IDENT for that, because it
doesn't have a value for just a PLMN (and is not a bitmask).
Change-Id: Ib9af67b100c4583342a2103669732dab2e577b04
During FSM design for osmo-msc, I noticed that the current behavior that
keep_timer=true doesn't guarantee a running timer can make FSM design a bit
complex, especially when using osmo_tdef for timeout definitions.
A desirable keep_timer=true behavior is one that keeps the previous timer
running, but starts a timer if no timer is running yet.
The simplest example is: a given state repeatedly transitions back to itself,
but wants to set a timeout only on first entering, avoiding to restart the
timeout on re-entering.
Another example is a repeated transition between two or more states, where the
first time we enter this group a timeout should start, but it should not
restart from scratch on every transition.
When using osmo_tdef timeout definitions for this, so far separate meaningless
states have to be introduced that merely set a fixed timeout.
To simplify, add osmo_fsm_inst_state_chg_keep_or_start_timer(), and use this in
osmo_tdef_fsm_inst_state_chg() when both keep_timer == true *and* T != 0.
In tdef_test.ok, the changes show that on first entering state L, the previous
T=1 is now kept with a large remaining timeout. When entering state L from O,
where no timer was running, this time L's T123 is started.
Change-Id: Id647511a4b18e0c4de0e66fb1f35dc9adb9177db
fi->T values are int, i.e. can be negative. Do not log them as unsigned, but
define a distinct timer class "Xnnnn" for negative T values: i.e. for T == -1,
print "Timeout of X1" instead of "Timeout of T4294967295".
The negative T timer number space is useful to distinguish freely invented
timers from proper 3GPP defined T numbers. So far I was using numbers like
T993210 or T9999 for invented T, but X1, X2 etc. is a better solution. This way
we can make sure to not accidentally define an invented timer number that
actually collides with a proper 3GPP specified timer number that the author was
not aware of at the time of writing.
Add OSMO_T_FMT and OSMO_T_FMT_ARGS() macros as standardized timer number print
format. Use that in fsm.c, tdef_vty.c, and adjust vty tests accordingly.
Mention the two timer classes in various API docs and VTY online-docs.
Change-Id: I3a59457623da9309fbbda235fe18fadd1636bff6
Add a flag that adds timeout info to osmo_fsm_inst state change logging.
To not affect unit testing, make this an opt-in feature that is disabled by
default -- mostly because osmo_fsm_inst_state_chg_keep_timer() will produce
non-deterministic logging depending on timing (logs remaining time).
Unit tests that don't verify log output and those that use fake time may also
enable this feature. Do so in fsm_test.c.
The idea is that in due course we will add osmo_fsm_log_timeouts(true) calls to
all of our production applications' main() initialization.
Change-Id: I089b81021a1a4ada1205261470da032b82d57872
The NS implementation part of the Gb implementation libosmogb
so far implemented a rather classic dialect of Gb, with lots of
heritage to FR (Frame Relay) transports. At least since Release 6
of the NS specification, there's an IP Sub-Network Service (SNS),
which
* permits for dynamic configuration of IP endpoints and their NS-VCs
* abandons the concept of a NSVCI on IP transport
* forbids the use of RESET/BLOCK/UNBLOCK procedures on IP transport
This commit introduces BSS-side IP-SNS support to libosmogb in a
minimally invasive way. It adds a corresponding SNS FSM to each NS
instance, and implements the new SIZE/CONFIG/ADD/DELETE/CHANGE_WEIGHT
procedures very closely aligned with the spec.
In order to use the SNS flavor (rather than the classic one),
a BSS implementation should use gprs_ns_nsip_connect_sns() instead
of the existing gprs_ns_nsip_connect().
This implementation comes with a set of TTCN-3 tests in
PCU_Tests_RAW_SNS.ttcn, see Change-ID
I0fe3d4579960bab0494c294ec7ab8032feed4fb2 of osmo-ttcn3-hacks.git
Closes: OS#3372
Closes: OS#3617
Change-Id: I84786c3b43a8ae34ef3b3ba84b33c90042d234ea
Modern NS specifications contain a SNS (Sub Network Service) for
negotiating IP/port/weight parameters of NS-over-IP links dynamically.
This patch adds message encoding routines for SNS-CONFIG, SNS-SIZE
and their respective acknowledgements.
Related: OS#3372
Change-Id: I5c47e1c3c10deb89a7470ee2c03adfc174accc93
It should be large enough to prepend a struct osmo_scu_prim to pass down an
SCCP stack (see libosmo-sccp). 264 should suffice, but pick the next larger
power-of-two instead.
In osmo-msc, I would like to prepend an osmo_prim to the msgb created by
gsm0808 API, but turns out the headroom is too small:
msgb(0x61700001b660): Not enough headroom msgb_push (126 < 264)
Instead of always copying a msgb that has just that instant been created, it
makes more sense to allocate sufficient headroom in the first place.
Change-Id: I95729991eb49555f8bba60c5dc916131b03b6cf2
Add functions to dump LCLS (without GCR) and GCR. Dumping entire struct
results in inconveniently long string hence the separate functions. Both
use talloc functions so they expect caller to take care of providing
proper allocation context and freeing memory.
Change-Id: Ic3609224c8f3282d667e75f68bc20327e36eb9e6
The symbols for those functions were always exported, but we
somehow didn't declare them in gprs_ns.h
Change-Id: Ib073e9c93fcdf408b63000182e90aabce37f687e
We are using macros like this or different workarounds in libmsc. In the course
of implementing inter-MSC handover, I am encountering yet another such
situation of appending multiple strings to a limited char buffer. Standardize.
Add a unit test to utils_test.c.
Change-Id: I2497514e26c5e7a5d88985fc7e58343be1a027b2
This is from TS 08.08 3.2.2.11 directly. The choices for Data mode
and Speech mode were already present, but not for Signalling mode
Change-Id: I9e24841ea877a9a78dc4d2bd14cbf60c4bea79a6
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
In OsmoMSC, it's required to be able to specify a particular GSM 04.07
transaction ID for GSM 04.80 Release complete message instead of the
hard-coded value, that is used gsm0480_create_ussd_release_complete().
Let's finally deprecate gsm0480_create_ussd_release_complete(), and
introduce a new function without USSD prefix, as this message
is also used in other "structured" supplementary services.
Change-Id: Ie3ac85fcef90a5e532334ba3482804d5305c88d7
When a call that was established in a CSFB context ends the CLEAR
COMMAND that is send from the BSC to the MSC should contain a CSFB
indication IE, which consists of just the IE byte itsslef. This
additional IE tells the BSC to include other CSFB related IEs into the
RR Release message.
Change-Id: Id8a75e1da2d5f520064666e4ee413d1c91da6ae3
Related: OS#3778
This is similar to msgb_tailroom(): It returns the amount of space
left at the end of the bit vector (compared to the current cursor).
The function returns the number of bits left in the bitvec.
Change-Id: I8980a6b6d1973b67a2d9ad411c878d956fb428d1
Move T_def from osmo-bsc to libosmocore as osmo_tdef. Adjust naming to be more
consistent. Upgrade to first class API:
- add timer grouping
- add generic vty support
- add mising API doc
- add C test
- add VTY transcript tests, also as examples for using the API
From osmo_fsm_inst_state_chg() API doc, cross reference to osmo_tdef API.
The root reason for moving to libosmocore is that I want to use the
mgw_endpoint_fsm in osmo-msc for inter-MSC handover, and hence want to move the
FSM to libosmo-mgcp-client. This FSM uses the T_def from osmo-bsc. Though the
mgw_endpoint_fsm's use of T_def is minimal, I intend to use the osmo_tdef API
in osmo-msc (and probably elsewhere) as well. libosmocore is the most sensible
place for this.
osmo_tdef provides:
- a list of Tnnnn (GSM) timers with description, unit and default value.
- vty UI to allow users to configure non-default timeouts.
- API to tie T timers to osmo_fsm states and set them on state transitions.
- a few standard units (minute, second, millisecond) as well as a custom unit
(which relies on the timer's human readable description to indicate the
meaning of the value).
- conversion for standard units: for example, some GSM timers are defined in
minutes, while our FSM definitions need timeouts in seconds. Conversion is
for convenience only and can be easily avoided via the custom unit.
By keeping separate osmo_tdef arrays, several groups of timers can be kept
separately. The VTY tests in tests/tdef/ showcase different schemes:
- tests/vty/tdef_vty_test_config_root.c:
Keep several timer definitions in separately named groups: showcase the
osmo_tdef_vty_groups*() API. Each timer group exists exactly once.
- tests/vty/tdef_vty_test_config_subnode.c:
Keep a single list of timers without separate grouping.
Put this list on a specific subnode below the CONFIG_NODE.
There could be several separate subnodes with timers like this, i.e.
continuing from this example, sets timers could be separated by placing
timers in specific config subnodes instead of using the global group name.
- tests/vty/tdef_vty_test_dynamic.c:
Dynamically allocate timer definitions per each new created object.
Thus there can be an arbitrary number of independent timer definitions, one
per allocated object.
T_def was introduced during the recent osmo-bsc refactoring for inter-BSC
handover, and has proven useful:
- without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be
programmed with the right timeout value, for all code paths that invoke this
state change. It is a likely source of errors to get one of them wrong. By
defining a T timer exactly for an FSM state, the caller can merely invoke the
state change and trust on the original state definition to apply the correct
timeout.
- it is helpful to have a standardized config file UI to provide user
configurable timeouts, instead of inventing new VTY commands for each
separate application of T timer numbers.
Change-Id: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5
Provide a va_list type vty_out() variant, to be able to pass on variable
arguments from other function signatures to vty_out().
This will be used by Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 for osmo_tdef.
Change-Id: Ie6e6f11a6b794f3cb686350c1ed678e4d5bbbb75
socket.h uses INET6_ADDRSTRLEN without including arpa/inet.h where it's
defined which might break external users of socket.h
Fix this by adding missing include. The error was introduced in
64b51eb68b
Change-Id: I2883addcb81cec038577e401e356e8f07a947d4c
Replace osmo_gsup_get_err_msg_type() with a wrapper to
OSMO_GSUP_TO_MSGT_ERROR(). This macro assumes, that all error messages
are (request message | 0x000001). Add a big comment header for
osmo_gsup_message_type, describing this already implicitly followed rule
and therefore making it explicit.
With this change, we don't need to maintain the request -> error message
mapping in osmo_gsup_get_err_msg_type() anymore.
Related: Iec1b4ce4b7d8eb157406f006e1c4241e8fba2cd6 (osmo-gsm-manuals)
Change-Id: I46d9f2327791978710e2f90b4d28a3761d723d8f
osmo-bsc and osmo-msc implement identical Classmark structures. It makes sense
to define once near the gsm48 protocol definitions.
Also move along some generic Classmark API from osmo-msc.
Change-Id: Ifd27bab0380f7ad0c44c719aa6c8bd62cf7b034c
Add osmo_hexdump_buf() as an all-purpose hexdump function, which all other
osmo_hexdump_*() implementations now call. It absorbs the static
_osmo_hexdump(). Add tests for osmo_hexdump_buf().
Rationale: recently during patch review, a situation came up where two hexdumps
in a single printf would have been useful. Now I've faced a similar situation
again, in ongoing development. So I decided it is time to provide this API.
The traditional osmo_hexdump() API returns a non-const char*, which should
probably have been a const instead. Particularly this new function may return a
string constant "" if the buf is NULL or empty, so return const char*. That is
why the older implementations calling osmo_hexdump_buf() separately return the
buffer instead of the const return value directly.
Change-Id: I590595567b218b24e53c9eb1fd8736c0324d371d
Add
* osmo_lai_cmp() (to use in gsm0808_cell_id_u_matches())
* osmo_cgi_cmp() (to use in gsm0808_cell_id_u_matches())
* gsm0808_cell_id_u_match() (to re-use for single IDs and lists)
* gsm0808_cell_ids_match()
* gsm0808_cell_id_matches_list()
* Unit tests in gsm0808_test.c
Rationale:
For inter-BSC handover, it is interesting to find matches between *differing*
Cell Identity kinds. For example, if a cell as CGI 23-42-3-5, and a HO for
LAC-CI 3-5 should be handled, we need to see the match.
This is most interesting for osmo-msc, i.e. to direct the BSSMAP Handover
Request towards the correct BSC or MSC.
It is also interesting for osmo-bsc's VTY interface, to be able to manage
cells' neighbors and to trigger manual handovers by various Cell Identity
handles, as the user would expect them.
Change-Id: I5535f0d149c2173294538df75764dd181b023312
The longest BCd-digit type identity is the IMEISV with 16, so there's
no point in trying to parse up to 255 decimal digits, which will do
nothing but to overflow the caller-provided output buffer.
Let's also clearly define the required minimum size of the output
buffer and add a reltead #define for it.
Change-Id: Ic8488bc7f77dc9182e372741b88f0f06100dddc9
This resolves an issue introduced in 84fb5bb6a0
when msgb_wrap_with_TL() was introduced as an inline function with
*exactly the same name* as in osmo-msc.git and openbsc.git. We *NEVER*
do something like this. Functions moved from applications to library
*MUST* always be renamed. This has been the case for almost a decade
now.
With this subsequent change we make sure the libosmocore function
has a different name and doesn't clash. After this commit, old
openbsc.git and osmo-bsc.git should again build fine.
Change-Id: If1e851ac605c8d2fde3da565b0bd674ea6350c2e
They only make sense in the context of LCLS so far - let's make sure
they're not used by external projects directly instead of gsm0808_*()
counterparts.
Change-Id: I4ae5a3472a20492d5f76170b722e4e2274a5c433
Most of the time we'll have GCR filled anyway so it make sense to have
it as static parameter instead of a pointer to separately allocated
structure. Update tests to cover both static and dynamic osmo_lcls
allocation variants.
Change-Id: I905c36d8455911c68c30bc429379b7313dd46aea
* add gsm0808_create_ass_compl2() with additional gsm0808_lcls_status
parameter and make gsm0808_create_ass_compl() into trivial wrapper
around it
* update tests accordingly
Change-Id: I547c6b8707123aa8c1ef636db88908df112d90a4
Related: OS#2487
The function osmo_sock_get_name_buf() can be used to write a string
representation to a user provided memory. Unfortunately the proper
length for the user provided memory is not obvious. To make using
osmo_sock_get_name_buf() more practical, add a define constant that
defines the length of the required memory. Also use this define in
socket.c.
Change-Id: If8be8c2c0d4935da17ab13b2c2127b719ceefbcc
Prepare handling multiple CM Service Requests in osmo-msc: an enum is more
clear than an int and #defines for passing around and count CM Service types.
Change-Id: I9c2a7adc45ab7a1a7519168e965e7d805e1481ff
Verify 14 digit and 15 digit IMEI strings. OsmoHLR will use the 14
digit version to check IMEIs before writing them to the DB.
Place the Luhn checksum code in a dedicated osmo_luhn() function, so
it can be used elsewhere.
Related: OS#2541
Change-Id: Id2d2a3a93b033bafc74c62e15297034bf4aafe61
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports osmo-bsc code for encoding SI rest octets.
The conversion was a bit tricky in some places because some
functions receive a 'struct gsm_bts' parameter in osmo-bsc.
In this libosmocore version, such functions expect parameters
which correspond to the individual fields of 'struct gsm_bts'
which are used by these functions.
Several structs from osmo-bsc's system_information.h are now
also declared in libosmocore headers, with an added osmo_ prefix
to avoid collisions with existing definitions in osmo-bsc.
Some helpers were ported from osmo-bsc's system_information.c
to libosmocore's gsm48_rest_octets.c. Contrary to osmo-bsc's
implementation they are now only visible within this file.
Unfortunately, this code ported from osmo-bsc lacks unit tests.
Change-Id: I47888965ab11bba1186c21987f1365c9270abeab
Related: OS#3075
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports one of the prerequisites for doing so:
osmo-bsc code for range-encoding ARFCNs, including tests.
An osmo_gsm48_ prefix has been prepended to public symbols in
order to avoid clashes with existing symbols in osmo-bsc code.
Change-Id: Ia220764fba451be5e975ae7c5eefb1a25ac2bf2c
Related: OS#3075
Note that OSMO_GSUP_IMEI_RESULT_ACK is 0 on the wire, although the
enum value is 1. Same with NACK (1 on wire, enum 2).
I had implemented enum osmo_gsup_imei_result after
enum osmo_gsup_cancel_type above, where this comment exists as well,
and I incorrectly assumed that enum osmo_gsup_cn_domain in the middle
was also implemented this way and therefore adding the comments to each
enum would be redundant. But for cn_domain, the values on the wire are
the same as the enum values.
Change-Id: If97c34f117bfaab2232bbb625e9d118c8f390e58
We have gsm48_mi_to_string() and osmo_bcd2str(), but still lack a function that
conveniently prints both MI type and value in one function call.
Related: http://people.osmocom.org/neels/mi_mi_mi.jpg
Change-Id: I7798c3ef983c2e333b2b9cbffef6f366f370bd81
Previously it could encode both incorrect values as well as incorrect
message. Let's fix this by explicitly checking for invalid values and
ensuring that at least one of the parameters is valid.
This function have no external or internal users so it's better to fix
type signature as well to match the rest of gsm0808_create_lcls_*().
Change-Id: I7b33a771acbd391c5f9a494d6450edb18511433f
In the MSC, we have RAN types GERAN_A and UTRAN_IU, now we need a similar enum
in osmo-hlr's GSUP client.
Naming: in the MAP specifications, the RAN type is mostly called RAT type,
(Radio Access Network vs. Radio Access Technology?). Since GSUP is more about
MAP messages, I'm calling the enum osmo_rat_type.
Rationale: osmo-msc and osmo-sgsn want to tell the osmo-hlr which RAT a
subscriber is calling on. A subsequent patch will extend the GSUP protocol and
add a RAT types IE.
Change-Id: I659687aef7a4d67ca372a39fef31dee07aed7631
Using an FSM instace's logging context is very useful. Sometimes it makes sense
to log something on a different logging category than the FSM definition's
default category.
For example, an MSC conn has aspects concerning MM, CC, RR, MGCP, ..., and
currently all of those log on DMM.
This came up in I358cfbaf0f44f25148e8b9bafcb9257b1952b35a, where I want to log
an MGCP event using a ran_conn context, and used the conn->fi->id. That of
course omits context like the current conn FSM state...
I remember at least one other place where I recently added logging using some
fi->id as context, so it might turn out useful in various places.
Change-Id: I11b182a03f5ecb6df7cd8f260757d3626c8e945d
The LOGPFSM macros are in such wide use that they should guard against a NULL
fi pointer. In case of NULL, default to subsys = DLGLOBAL, loglevel =
LOGL_ERROR and state = "fi=NULL".
Change-Id: I9eaf8b7e2cf1e450ae626cb2fc928862008f6233
In 3GPP TS 48.008 the Global Call Reference IE is only used in HANDOVER
REQUEST (§3.2.1.8) and ASSIGNMENT REQUEST (§3.2.1.1) messages which
also include LCLS Config and CSC parameters. Hence, there's no point in
using GCR encode/decode functions alone.
Introduce gsm0808_dec_lcls() and gsm0808_enc_lcls() as trivial wrappers
on top of GCR enc/dec routines which are made static. Adjust tests
accordingly. Test output intentionally left unchanged.
Change-Id: Icfbb2404e1a1d500243e2071173299b557369335
Instead of duplicating the fmt and args in LOGPFSML and LOGPFSMLSRC, rather
make LOGPFSML invoke LOGPFSMLSRC with __FILE__ and __LINE__.
This is a cosmetic preparation for more tweaks coming up.
Change-Id: I2f23c57ebfdb5355919c06ac5ded7732e3b17a97
Extend the vty_bind_cmd VTY command to allow to optionally specify
a port in addition to the IPv4 address.
Introduce telnet_init_default to relieve client code from having
to query the bind IPv4 address (and now the TCP port). Instead a
client only needs to pass the default TCP port to use.
Client code should use it like:
int rc = telnet_init_default(ctx, priv, OSMO_VTY_PORT_SGSN);
Change-Id: Id5fb2faaf4311bd7284ee870526a6f87b7e260f3
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Simplify gsup_test.c by defining an end marker in gsup.h. No need to
manually update the last element every time anymore.
The C standard guarantees, that the end marker will have the last value
plus one: "Each subsequent enumerator with no = defines its enumeration
constant as the value of the constant expression obtained by adding 1 to
the value of the previous enumeration constant." (From C99: 6.7.2.2
Enumeration specifiers)
Change-Id: I2aab7245e209f0ebd2f33a83d4d181dd3339cb17
Similar to existing 16 and 32 bit value helpers but simpler because we
don't have to worry about alingment and endianness.
Change-Id: Ic0a148bd04b8860e321f509fdcd913f688c8e920
The name "LAI AND LAC" makes no sense because a LAC
is part of a LAI. Keep the old name available for
API backwards compatibility.
Change-Id: I2749cf75b7b45de0cd43cf4c696a6b6984f5a065
Related: OS#3124
This is 1:1 the result of doing
cd libosmocore
./contrib/struct_endianess.py
git commit -a
Running struct_endianess.py again should result in no changes.
That means we could include such a check in the gerrit verification job now.
Change-Id: Ia0b99d76932aeb03e93bd0c62d3bf025dec5f9d2
Basically, I am applying code review that I would have given had I not been on
vacation when the last osmo_sock_get_name* stuff was merged.
osmo_sock_get_name2() is so far a static internal function. However, it is
nothing like osmo_sock_get_name(), so instead rename it to
osmo_sock_get_ip_and_port(). Also make it public API, no need to hide it. I'm
adding an "and" in the name to hopefully clarify: "ip_port" vs. "ip_and_port"
-- there already are _get_X_ip_port() functions that only return the port
string, despite "ip" in the name.
Add new public osmo_sock_get_name2(), which is like osmo_sock_get_name(),
except it uses a static string instead of talloc, and omits the braces. This
is most convenient for log statement formats, avoiding dyn allocations.
Add new osmo_sock_get_name_buf(), which is like osmo_sock_get_name2() but
writes to a caller provided char buffer.
Use osmo_sock_get_name_buf() in the implementation of osmo_sock_get_name(),
but use another (non-static) local string buffer, because adding braces is too
complex without talloc_snprintf().
Rationale:
I want to improve the logging of socket errors, e.g. change
DLMGCP ERROR Failed to read: 111/Connection refused (mgcp_client.c:720)
to
DLMGCP ERROR Failed to read: r=10.0.99.2:2427<->l=10.0.99.2:2728: 111='Connection refused' (mgcp_client.c:721)
but it is just not handy to compose logging with the current API:
- osmo_sock_get_name() requires a talloc_free().
- all the others require output buffers.
- the only way to conveniently compose a logging string and,
- notably, the only trivial way to skip the string composition if the logging
level is currently muted, is to have a function that returns a static string:
the new osmo_sock_get_name2().
- (I think the osmo_sock_get_{local,remote}_* convenience wrappers should never
have been added, because they encourage the caller to invoke the same code
twice, for IP addr and port, and throw away one half each time.)
Related: Iae728192f499330d16836d9435648f6b8ed213b6 (osmo-mgw)
Change-Id: I8ad89ac447c9c582742e70d082072bdd40a5a398
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add functions to encode Global Call. Ref. from TS 29.205 as 3GPP TS
48.008 §3.2.2.115 information element
* add corresponding tests
Change-Id: I82ce0207dc8de50689a8806c6471ad7fbae6219d
Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
It's often handy to compare certain msgb layer to a given array and
print the position where they differ. Add simple pretty-printer and
corresponding L* wrappers.
Change-Id: I3bc95f2f5ab6e3f4b502647fb3e0aaaf1f7c4cf5
Add a standalone bcd-to-string conversion function with generic parameters.
Add a regression test in utils_test.c.
So far there is no single universal implementation that converts a BCD to a
string. I could only find gsm48_mi_to_string(), which also interprets
surrounding bytes, MI type and TMSI as non-BCD value.
The idea is to use this function from gsm48_mi_to_string() and similar
implementations in subsequent commits.
Root cause: in osmo-msc, I want to have an alternative MI-to-string function
for composing an FSM name, which needs the BCD part of gsm48_mi_to_string() but
not the TMSI part.
Change-Id: I86b09d37ceef33331c1a56046a5443127d6c6be0
Counting list entires should not alter the list content: let's make this
obvious from type signature.
Change-Id: I414e67a3de733fab407161b3264d3b89070ba537
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
We already have some GSM29118 related definitions and functions in
libosmocore. Lets also add some functions to generate GSM29118 messages
(similar to those we have for GSM0808).
Change-Id: Ic87f8a771b87b52215d0a7451b67794557b80b8a
Related: OS#3615
The specification defines a default port where the SGs interface should
be reachable. Lets add a define-constant for it.
Change-Id: Ia4b9f547dd980411d15b2691b7f535fa0463f0f1
Related: OS#3615
It's similar to osmo_sockaddr_to_str_and_uint() but does not require odd
typecasting for AF_INET case. Make osmo_sockaddr_to_str_and_uint() into
wrapper around new function and make sure to check for address family
before typecasting. Also use proper return type.
Change-Id: Ie384483124d407a960ab6732e6a7fd90554389d2
The value string arrays in the header file (gsm_29_118.h) are not
declared as extern. Lets add it now.
Change-Id: Ib6c4cbea649f790fa4db1ed2fe2b7e76a60291b4
Related: OS#3615
When adding complex TLV structures where length of V is not known in
advance it's handy to be able to simply add Tag and save the pointer to
the Length field so it can be updated once entire Value is added and its
length is known.
Change-Id: I8dc1e4880352833a0a49c1dd0d7cb4148ac43aff
We always use id = 0 when sending TRAP messages. Let's make this more
obvious by introducing appropriate define.
Change-Id: I33d7d4c6a1885a75a85d6f2f017430e0860b4126
* add missing L1 and L4 hexdump
* add msgb_l4() for consistency and convert msgb_sms() into simple alias
Those will be used in follow-up patches for msgb debug/test helpers.
Change-Id: I8d6dd1b1ff3aa98a452711c692ca7dee0449203b
We currently have no generator function that can generate BSSMAP
HANDOVER PERFORMED messages. Lets add function for this.
Change-Id: I825106858bd89afc9837811b8fed2e8accc82441
Related: OS#3645
ARFCNs are values in well defined ranges. Until this patch, ARFCNs not
belonging to any band were blindly assigned to DCS1800 by
gsm_arfcn2band, causing unnoticed bugs and misconfigurations in
osmo-bsc.
Previous API gsm_arfcn2band cannot accomodate this kind of check easily,
so let's deprecate it to tell people to use a new API gsm_arfcn2band_rc
which performs this kind of checks and allows callers to log failures,
misconfigurations, etc.
At the same time, modify implementation of gsm_arfcn2band to abort if an
invalid ARFCN is passed, this way users of this API can notice they are
passing wrong data to it that most probably will produce unexpected
results.
Related: OS#3063
Change-Id: I780d452dcebce385469e32ef2fd844df6033393a
It's convenient to hold all LCLS-related parameters from 3GPP TS 48.008
in a single structure.
This will be used in follow-up patch handling Assignment Request with
extended parameters as well as corresponding BSC code working with LCLS.
Change-Id: I4b873f9a3c5a5d33b438382971b3d92e40d48d62
Related: OS#2487
These are actually parts of the struct in big endian order, which will soon be
done automatically by struct_endianess.py.
Change-Id: I9bc694f10fa9cef0bb7fc791bb40e7602459b16b
That's necessary for 'struct tlv_parsed' definition although lack of it
does not cause build failure in libosmocore for me but does so for
osmo-bsc.
Change-Id: I3b2d3955d02b07dc7ec5e9f0c66cc477196703ed
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
The msgb_wrap_with_TL() is generally useful so it make sense to make it
public to facilitate code re-use.
Other helpers can be implemented as trivial wrappers over existing tlv.h
functions. Update headers and code accordingly.
Change-Id: I37e91d031fba28cf1c6735b8069b0265746f55e6
Add values indicating that LCLS control/config/status value has not been
received yet.
Change-Id: I52dc6a52f5ee043ed2c1625ffecfd495e3c746b1
Related: OS#2487
* add Class definitions
* add helper to check for extended bit
* add helper to get Cause's Class
* use enum in gsm0808_cause_name() and gsm0808_create_cipher_reject() to
avoid confusion between class and cause
* update gsm0808_create_cipher_reject() comments
Change-Id: I31b31dfc22eb4b6b07089e1255246ac458125340
Related: OS#3187
The value strings for the SGSAP IEI are missing, lets add a set of value
strings and a function to retrieve them.
Change-Id: I2787303174f74ffba86675bce2c12f680d8ea708
Related: OS#3615
The header file gsm_29_118.h is defining variables of type struct
value_string, which is declared in core/utils.h. We should add an
include to utils.h to prevent confusion when the header is used.
Change-Id: I9f9bb62d29cd068820ad5aa677717bd448de3f4a
Related: OS#3615
There is already a group of similar functions for L1, L2 and L3,
but L4 was missing. The L4 is usually used for parsing of complex
L3 messages, such as SS/USSD and SMS.
This change introduces a similar halper for L4.
Change-Id: I755f2d654bbdad2a8b4f94df9023bdd370b07ae6
The function that generates the clear command takes a parameter
"reason", which is the cause code. Lets give it the name "cause" to have
a coherent naming scheme that matches the other functions and the 3gpp
specs.
Change-Id: I7b6c15e8fa8db13deef5041095944ca1c58fb99f
Return only the IP or port of either the local or remote connection,
not the whole set of IP and port of both the local and remote
connection like osmo_sock_get_name() does it. This is needed for
OS#2841, where we only want to print the remote IP.
Related: OS#2841
Change-Id: I6803c204771c59a2002bc6a0e6b79c83c35f87e1
It will allow to make code handling chan_nr values more easier to read
and less prone to errors.
union is used to be able to get the full octet in
case we need to pass it somewhere else or encode it.
An extra union is used in struct abis_rsl_common_hdr and others to allow
using fields directly while keeping API compatibility.
Change-Id: Icd6822021207270a00106c50f8ca6b93c1250df9
It will allow to make code handling link_id values more easier to read
and less prone to errors.
union is used to be able to get the full octet in
case we need to pass it somewhere else or encode it.
An extra union is used in struct abis_rsl_common_hdr to allow using fields
directly while keeping API compatibility.
Change-Id: Ibd75a493bcfdf46c028ea466867d0c0d83d46343
Wireshark GSMTAP dissector has LTE NAS subtypes for plain NAS messages
and NAS messages with security header. This commit adds definition for
these subtypes.
Change-Id: I49d15fb13299c1bcbe0fb7e50bf222294c7a49ef
Later release of 3GPP TS 36.331 added new LTE RRC channels. This commit
additionally defines LTE RRC message types existing in Release V15.3.0.
Change-Id: Ifa48b2227be15af04c9a4702d2025abcc660f0df
Daniel Willmann
Harald Welte
Max
Oliver Smith
Pau Espin
Philipp Maier
Sylvain Munaut
Martin Hauke
Shinjo Park
