Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
3GPP TS 48.008 chapter 3.2.2.103 states that the configuration bits of
OFR_AMR_WB are coded as follows:
"S0, S2, S4 indicates the supported Codec Configurations. S1, S3, S5, S6,
S7 are reserved and coded with zeroes."
The current default setting of 0x3F violates this requirement. Lets set
the "forbidden" settings zu zero and keep only the allowed ones.
Change-Id: I4a481def59e9c98cfdcafc2b80c0ac7df0c14130
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: Ibc1d3746f1876ac42d6b1faf0e5f83bd2283cdcc
There was gsm0480_l3hdr_push() declared in a header file, but
not exposed in 'libosmogsm.map'. Furthermore, for some reason
it was a part of GSM 04.80 API, what is not actually correct.
Let's rename this symbol, and properly expose it as a part of
the GSM 04.08 API. Also, let's introduce an auxiliary wrapper
for messages, where the transaction identifier is required
(see GSM 04.07, section 11.2.3.1.2).
Change-Id: I8a045efe8335d83fcbe8d43eb180972e3b1d9dda
In the previous commit we deprecated ipa_ccm_idtag_parse() but
also removed ipa_ccm_idtag_parse_off(), for which I couldn't find
any users. However, legacy openbsc.git still uses this function,
so let's re-introiduce it in its original form.
Change-Id: Ibfe53b04340eb355c8bfb8453a2af1522a4b6baf
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As we're moving this to a common/shared library now, we need to use
the osmo_ namespace prefix for symbol names, struct/type names and
constants.
Change-Id: Ie36729996abd30b84d1c30a09f62ebc6a9794950
This imports the code from osmo-msc 6afef893e17bce67e4d4119acd34d480ed03ba77
with minimal changes to make it compile. Symbol renaming to osmo_
prefix is done separately in a follow-up patch to have a as-clean-as-possible
import first.
Change-Id: I9bc38102318da02d1fe46ef516df3cfd6bf8e3da
Contrary to the existing gsm0480_create_ussd_resp(), the new function
only generates the value part of the FACILITY IE, and not the IE
Tag/Length or the 04.08 L3 header. This is needed in the context of
GSUP-encapsulated USSD, as here we don't work with L3 messages, but
only pass on the FACILITY IE value.
Change-Id: Ide240279240322f643e142229eb7829f538c6314
enum gsm0808_permitted_speech does not have any value strings. Lets
add value strings to make debugging easier.
Change-Id: I5b5612a5df2758b0137a34c17f7c8c2b3f07c806
The value string table gsm48_chan_mode_names[] lacks a function
to get the value string by a value. Lets add one.
Change-Id: I0757bcc278c140e18249e35864338e19cdaa3cf7
Add:
gsm0808_create_handover_detect()
gsm0808_create_handover_complete()
gsm0808_create_handover_failure()
To existing structs gsm0808_old_bss_to_new_bss_info and
gsm0808_handover_required, add a final 'more_items' flag that makes future
extensions API and ABI compatible.
Fix the msgb string for Handover Request Ack.
Extend some API doc comments.
Related: OS#2283 (inter-BSC Handover, BSC side, MT)
Change-Id: I03ee7ce840ecfa0b6a33358e7385528aabd4873f
In Change-Id I1cee271fed0284a134ffed103c0d4bebbcfde2a8 we added support
for a new session state IE, but we didn't add any value_string array
for string conversion of it. Let's fix this.
Change-Id: I3d9f087786dc37c42498fa9a2be07483ec93ba7b
This function can be used to resolve the error message type for
a given message type. Can be used by generic error handlers that
work for any incoming message type.
Change-Id: Ic637bec53dd7fe3ec83da99b49b4eae34d5602b2
This function can be used when there is only a part of GSM 04.80
message available - Facility IE, e.g. when a message is carried
over GSUP/MAP. Let's expose it.
Refactoring includes the following:
- adding the 'gsm0480_' prefix;
- correcting inverted return value;
- cosmetic code style changes.
Change-Id: I623c39ffbe6cdee65eade8435a2faa04d0da193e
In some cases, there is no need to parse the whole message,
e.g. during the conversion from DTAP to GSUP/MAP. This
function can be used to extract given IE from a message.
Change-Id: I3989d061903352473305f80712f1a1560d05df3d
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
The idea is to be able to add a gsm0808_cell_id to a gsm0808_cell_id_list2:
first convert it to a list, then re-use gsm0808_cell_id_list_add(). It will be
used by osmo-bsc to manage neighbor-BSS cell identifiers from VTY.
Change-Id: Ibf746ac60b1b1e920baf494b396658a5ceabd788
For some strange reason, the osmo_mncc_name() inline function
was not in the mncc.h header, but in the mncc.c file. Let's fix that.
Change-Id: I2c3666510c981dffa4ba25bed517fd7ebd1250f5
Add:
- gsm0808_current_channel_type_1()
- gsm0808_permitted_speech()
- gsm0808_chosen_channel()
- gsm0808_channel_type_name()
gsm0808_permitted_speech() is moved from osmo-bsc's bssap_speech_from_lchan();
gsm0808_chosen_channel() is moved from osmo-bsc's lchan_to_chosen_channel();
Rationale: will be re-used by inter-BSC handover, makes sense to keep with the
other gsm0808 utils.
Related: OS#2283 (inter-BSC handover, BSC side)
Change-Id: I8a3cc5d4548e9a78d945d54c69ccced251edcec9
According to TS 24.008 10.5.4.7 the called party BSC number IE
has a maximum length of 43 octets.
This length is assumed inside osmo-hlr with a magic number:
uint8_t msisdn_enc[43]; /* TODO use constant; TS 24.008 10.5.4.7 */
This change makes libosmocore provide a constant which osmo-hlr can use.
Change-Id: Ia0bf6ceadcac38a8c75d166402b54058e5c6c6d4
Ericsson supports a RSL command to page and immediate assign
as single command. For paging a MS the BTS must know the
paging group.
Change-Id: I9194500e307ad69f8da07510bc965a7a5cd82a2a
We are alredy doing the same way for ip.access and siemens ones, and
this way we avoid using the hardcoded value in osmo-bsc.
Change-Id: I7cb65f3ff1cfdbe4eee97b7545bcd13a38c72e25
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
Rationale: so far we use code like
if (TLVP_PRESENT(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS)) {
val = TLVP_VAL(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS);
len = TLVP_LEN(&tp, VERY_L0NG_ENUM_VALUE_NAME_TH4T_NEVER_EMDS);
}
This is a) very long and b) prone to picking the wrong name one of the three
times, which would use the wrong length or val without necessarily being
noticed. A safer and shorter, more readable pattern is:
struct tlv_p_entry *e = TVLP_GET(&tp, VERY_LONG_ENUM_VALUE_NAME_THAT_NEVER_ENDS);
if (!e)
return -ENOENT;
hexdump(e->val, e->len);
Change-Id: I445de17fc2daa3ab051f5708dd0cc185b23dc048
According to the GSM TS 04.07, section 11.2.3.1.1 "Protocol
discriminator", bits 1 to 4 of the first octet of a standard
L3 message contain the protocol discriminator IE.
Meanwhile, the GSM48_PDISC_USSD represents value 0x11, i.e.
0b10001, that requires 5 bits, and moreover it is not
documented anywhere. Let's drop it.
Change-Id: Ic4eb8a6db4ff1dfd535bd0c84e7acf1908422f64
Clarify semantics and micro-optimise for the case of single Cell Identifer IEs.
Test in gsm0808_test.c
So far we have gsm0808_enc_cell_id_list2(), but there also exist instances of
single Cell Identifiers (3GPP TS 48.008 3.2.2.17).
It is possible to decode the same using the cell identifier list API, but this
forces the caller to also keep a full struct gsm0808_cell_id_list2 with all its
127 entries around.
E.g. for handover, there are two Cell Identifiers (Serving and Target); I'd
need two full cell id lists for each, and these would be dynamically allocated
for each handover operation, whether it uses them or not.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I9f9c528965775698ab62ac386af0516192c4b0cc
Allow passing multiple struct tlv_parsed in an array, to allow parsing as many
repeated IEs as are expected by the caller.
From tlv_parse(), call tlv_parse2() with dec_multiple = 1 to yield the previous
behavior. tlv_parse() remains valid API.
An example of multiple IEs is the BSSMAP Handover Request, containing Cell
Identifier (Serving) and Cell Identifier (Target), both defined by 3GPP TS
48.008 3.2.2.17 with identical IE tags; both are mandatory.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: Id04008eaf0a1cafdbdc11b7efc556e3035b1c84d
This will be used by the upcoming neighbor_ident API in osmo-bsc, where the vty
interface allows composing neihbor BSS cell identifier lists, and we want to
allow adding individual items from individual user commands.
It will also be useful to accumulate cell identifiers in case a subscriber sees
multiple alternative cells from a neighboring BSS, and we want to pass these on
to the MSC in a Handover Required.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I5781f5fa5339c92ab2e2620489b002829d206925
This will be used by cell idenitifier list code, like upcoming neighbor_ident
VTY in osmo-bsc and regression tests.
Change-Id: Iebc5cdf61b697b1603900993fc265af3eca0cedf
All our projects have seen patches to move to 3-digit MNC handling.
Furthermore, since our builds no longer break from deprecation warnings, I shall
no longer refrain from deprecating old API.
Change-Id: I55dfaf7ce74870de44120b26c42d45bb7b184341
There seems to be quite some confusion / overlap between enum
gsm48_reject_value, gsm48_gsm_cause and gsm48_gmm_cause. I tried to go with
gsm48_gsm_cause_names[], but e.g. GSM48_REJECT_CONGESTION is not represented.
Instead of attempting to mix/merge those enums, provide a separate value string
array for enum gsm48_reject_value.
This will be used by osmo-msc's libvlr (refactoring of FSM result handling),
I27bf8d68737ff1f8dc6d11fb1eac3d391aab0cb1.
Change-Id: I6661f139e68a498fb1bef10c266c2f064b72774a